mevon axis.ini

# EMC controller parameters for a simulated machine.

# General note: Comments can either be preceded with a # or ; - either is
# acceptable, although # is in keeping with most linux config files.

# General section -------------------------------------------------------------
[EMC]

# Version of this INI file
VERSION =               $Revision$

# Name of machine, for use with display, etc.
MACHINE =               LinuxCNC-HAL-SIM-AXIS

# Debug level, 0 means no messages. See src/emc/nml_int/emcglb.h for others
#DEBUG =               0x7FFFFFFF
DEBUG = 0

# Sections for display options ------------------------------------------------
[DISPLAY]

# Name of display program, e.g., xemc
DISPLAY = axis

# Cycle time, in seconds, that display will sleep between polls
CYCLE_TIME =            0.100

# Path to help file
HELP_FILE =             doc/help.txt

# Initial display setting for position, RELATIVE or MACHINE
POSITION_OFFSET =       RELATIVE

# Initial display setting for position, COMMANDED or ACTUAL
POSITION_FEEDBACK =     ACTUAL

# Highest value that will be allowed for feed override, 1.0 = 100%
MAX_FEED_OVERRIDE =     1.2
MAX_SPINDLE_OVERRIDE =  1.0

MAX_LINEAR_VELOCITY =   1.2
DEFAULT_LINEAR_VELOCITY =   .25
# Prefix to be used
PROGRAM_PREFIX = /home/mevon/linuxcnc/nc_files

# Introductory graphic
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5

EDITOR = gedit
TOOL_EDITOR = tooledit

INCREMENTS = 1 in, 0.1 in, 10 mil, 1 mil, 1mm, .1mm, 1/8000 in

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Grayscale Depth Image
PROGRAM_EXTENSION = .py Python Script

png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

# Task controller section -----------------------------------------------------
[TASK]

# Name of task controller program, e.g., milltask
TASK =                  milltask

# Cycle time, in seconds, that task controller will sleep between polls
CYCLE_TIME =            0.001

# Part program interpreter section --------------------------------------------
[RS274NGC]

# File containing interpreter variables
PARAMETER_FILE = sim.var

# Motion control section ------------------------------------------------------
[EMCMOT]

EMCMOT =              motmod

# Timeout for comm to emcmot, in seconds
COMM_TIMEOUT =          1.0

# Interval between tries to emcmot, in seconds
COMM_WAIT =             0.010

# BASE_PERIOD is unused in this configuration but specified in core_sim.hal
BASE_PERIOD  =               0
# Servo task period, in nano-seconds
SERVO_PERIOD =               1000000

# Hardware Abstraction Layer section --------------------------------------------------
[HAL]

# The run script first uses halcmd to execute any HALFILE
# files, and then to execute any individual HALCMD commands.
#

# list of hal config files to run through halcmd
# files are executed in the order in which they appear
HALFILE = core_sim.hal
#HALFILE = custom.hal
HALFILE = axis_manualtoolchange.hal
#HALFILE = simulated_home.hal

# list of halcmd commands to execute
# commands are executed in the order in which they appear
#HALCMD =                    save neta

# Single file that is executed after the GUI has started.  Only supported by
# AXIS at this time (only AXIS creates a HAL component of its own)
#POSTGUI_HALFILE = test_postgui.hal

HALUI = halui

# Trajectory planner section --------------------------------------------------
[TRAJ]

AXES =                  3
COORDINATES =           X Y Z
HOME =                  0 0 0
NO_FORCE_HOMING = 	1
LINEAR_UNITS =          inch
ANGULAR_UNITS =         degree
CYCLE_TIME =            0.010
DEFAULT_VELOCITY =      1.2
#POSITION_FILE = position.txt
MAX_LINEAR_VELOCITY =   1.2

# Axes sections ---------------------------------------------------------------

# First axis
[AXIS_0]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY = 			1.00
MAX_ACCELERATION = 		30.0
#MAX_VELOCITY =                 4
#MAX_ACCELERATION =             100.0
BACKLASH = 			0.000
INPUT_SCALE =                   4000
OUTPUT_SCALE = 			1.000
MIN_LIMIT = 			-0.100
MAX_LIMIT = 			6.25
FERROR = 			0.050
MIN_FERROR = 			0.010
HOME_OFFSET =                   0.100
HOME_SEARCH_VEL = 		-0.5
HOME_LATCH_VEL = 		0.5
HOME_IGNORE_LIMITS = 		YES
HOME_USE_INDEX =                NO
HOME_SEQUENCE = 		1
#HOME_IS_SHARED = 		0


# Second axis
[AXIS_1]

TYPE =                          LINEAR
HOME =                          0.000
MAX_VELOCITY = 			1.00
MAX_ACCELERATION = 		30.0
BACKLASH = 			0.000
INPUT_SCALE =                   4000
OUTPUT_SCALE = 			1.000
MIN_LIMIT = 			-0.100
MAX_LIMIT = 			8.5
FERROR = 			0.050
MIN_FERROR = 			0.010
HOME_OFFSET =                   0.100
HOME_SEARCH_VEL = 		-0.5
HOME_LATCH_VEL = 		0.5
HOME_IGNORE_LIMITS = 		YES
HOME_USE_INDEX =                NO
HOME_SEQUENCE = 		2
#HOME_IS_SHARED = 		0


# Third axis
[AXIS_2]

TYPE =                          LINEAR
HOME =                          1.000
MAX_VELOCITY = 			1.0
MAX_ACCELERATION = 		30.0
BACKLASH = 			0.000
INPUT_SCALE =                   4000
OUTPUT_SCALE = 			1.000
MIN_LIMIT = 			-0.25
MAX_LIMIT = 			1.500
#MIN_LIMIT =                    -8.0
#MAX_LIMIT =                    0.0001
FERROR = 			0.050
MIN_FERROR = 			0.010
HOME_OFFSET =                   1.500
HOME_SEARCH_VEL = 		0.5
HOME_LATCH_VEL = 		-0.5
HOME_IGNORE_LIMITS = 		YES
HOME_USE_INDEX =                NO
HOME_SEQUENCE = 		0
#HOME_IS_SHARED = 		0


# section for main IO controller parameters -----------------------------------
[EMCIO]

# Name of IO controller program, e.g., io
EMCIO = 			io

# cycle time, in seconds
CYCLE_TIME =    		0.100

# tool table file
TOOL_TABLE = 			sim.tbl
TOOL_CHANGE_POSITION = 		0 0 1
#TOOL_CHANGE_QUILL_UP = 	1