Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build)
- Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar SE Serial ATA family
- Device Model: WDC WD2000JS-60NCB1
- Serial Number: WD-WMANL1429239
- Firmware Version: 10.02E02
- User Capacity: 200 049 647 616 bytes
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 7
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sun Apr 17 16:52:08 2011 YEKST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: FAILED!
- Drive failure expected in less than 24 hours. SAVE ALL DATA.
- No failed Attributes found.
- General SMART Values:
- Offline data collection status: (0x02) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (6780) seconds.
- Offline data collection
- capabilities: (0x10) No SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- No Selective Self-test supported.
- SMART capabilities: (0x8040) Does not save SMART data before
- entering power-saving mode.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 80) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16513
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 128 Unknown_Attribute 0x1811 247 112 002 Pre-fail Offline - 176497386064440
- 32 Unknown_Attribute 0x4089 001 001 --- Pre-fail Offline - 140877542384700
- 32 Unknown_Attribute 0x4220 197 128 --- Old_age Offline - 35751307771928
- 9 Power_On_Hours 0x0860 001 001 --- Old_age Offline - 27307410174036
- 2 Throughput_Performance 0x8044 100 097 017 Old_age Offline - 41506563948544
- 1 Raw_Read_Error_Rate 0x4019 100 006 --- Pre-fail Offline - 73774653243392
- 66 Unknown_Attribute 0x0401 001 001 --- Pre-fail Offline - 5517820810086
- 105 Unknown_Attribute 0x0000 058 000 --- Old_age Offline - 42
- 128 Unknown_Attribute 0x5301 108 072 002 Pre-fail Offline - 147368917860394
- 72 Unknown_Attribute 0x0040 200 004 --- Old_age Offline - 79233556676608
- 72 Unknown_Attribute 0x4420 200 001 --- Old_age Offline - 141836999983104
- 16 Unknown_Attribute 0x0404 200 000 000 Old_age Offline - 2276706598847
- 64 Unknown_Attribute 0x0018 200 001 --- Old_age Offline - 6871947673600
- SMART Error Log Version: 1
- ATA Error Count: 11 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 11 occurred at disk power-on lifetime: 34709 hours (1446 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 01 80 7a 81 e0 Error: UNC at LBA = 0x00817a80 = 8485504
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 42 00 01 80 7a 81 0c 00 00:33:30.838 READ VERIFY SECTOR(S) EXT
- 25 00 01 00 00 00 00 00 00:33:30.838 READ DMA EXT
- 42 00 01 7f 7a 81 0c 00 00:33:30.838 READ VERIFY SECTOR(S) EXT
- 35 00 08 f7 3b 00 00 00 00:33:30.838 WRITE DMA EXT
- 25 00 01 00 00 00 00 00 00:33:30.838 READ DMA EXT
- Error 10 occurred at disk power-on lifetime: 34709 hours (1446 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 02 7f 7a 81 e0 Error: UNC at LBA = 0x00817a7f = 8485503
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 42 00 02 7f 7a 81 0c 00 00:33:28.950 READ VERIFY SECTOR(S) EXT
- 35 00 08 07 2a 00 00 00 00:33:28.950 WRITE DMA EXT
- 25 00 01 00 00 00 00 00 00:33:28.950 READ DMA EXT
- 35 00 08 3f 13 4e 00 00 00:33:28.950 WRITE DMA EXT
- 35 00 08 37 28 00 00 00 00:33:28.950 WRITE DMA EXT
- Error 9 occurred at disk power-on lifetime: 34709 hours (1446 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 04 7d 7a 81 e0 Error: UNC at LBA = 0x00817a7d = 8485501
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 42 00 04 7d 7a 81 0c 00 00:33:27.018 READ VERIFY SECTOR(S) EXT
- 35 00 08 a7 08 00 00 00 00:33:27.018 WRITE DMA EXT
- 25 00 01 00 00 00 00 00 00:33:27.018 READ DMA EXT
- 35 00 08 6f 8f 00 00 00 00:33:27.018 WRITE DMA EXT
- 42 00 04 79 7a 81 0c 00 00:33:27.018 READ VERIFY SECTOR(S) EXT
- Error 8 occurred at disk power-on lifetime: 34709 hours (1446 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 79 7a 81 e0 Error: UNC at LBA = 0x00817a79 = 8485497
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 42 00 08 79 7a 81 0c 00 00:33:25.063 READ VERIFY SECTOR(S) EXT
- 25 00 01 00 00 00 00 00 00:33:25.063 READ DMA EXT
- 35 00 08 0f 57 00 00 00 00:33:25.063 WRITE DMA EXT
- 42 00 10 89 7a 81 0c 00 00:33:25.047 READ VERIFY SECTOR(S) EXT
- 35 00 08 bf 56 00 00 00 00:33:25.047 WRITE DMA EXT
- Error 7 occurred at disk power-on lifetime: 34709 hours (1446 days + 5 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 10 79 7a 81 e0 Error: UNC at LBA = 0x00817a79 = 8485497
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 42 00 10 79 7a 81 0c 00 00:33:23.158 READ VERIFY SECTOR(S) EXT
- 35 00 08 9f 49 00 00 00 00:33:23.158 WRITE DMA EXT
- 25 00 01 00 00 00 00 00 00:33:23.158 READ DMA EXT
- 35 00 08 47 13 4e 00 00 00:33:23.158 WRITE DMA EXT
- 35 00 08 8f 49 00 00 00 00:33:23.157 WRITE DMA EXT
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Vendor (0x6e) Interrupted (host reset) 80% 54895 -
- # 2 Vendor (0xe7) Completed: servo/seek failure 130% 23862 2624044415
- # 3 Vendor (0xfd) Unknown status (0xa) 100% 40677 -
- # 4 Vendor (0xae) Self-test routine in progress 110% 19134 -
- # 5 Vendor (0xd5) Unknown status (0xe) 60% 9207 -
- # 6 Vendor (0x9a) Self-test routine in progress 60% 11165 -
- # 7 Abort offline test Self-test routine in progress 110% 44770 -
- # 8 Vendor (0xaa) Unknown status (0x9) 100% 65087 -
- # 9 Vendor (0x6b) Fatal or unknown error 60% 52182 4190088313
- #10 Vendor (0xff) Completed: servo/seek failure 150% 44254 2945195134
- #11 Vendor (0x40) Completed without error 00% 37904 -
- #12 Offline Completed without error 00% 264 -
- #13 Reserved (0x05) Completed without error 00% 97 -
- #14 Offline Completed: handling damage?? 00% 8992 142611328
- #15 Offline Completed without error 00% 392 -
- #16 Reserved (0x08) Completed: handling damage?? 00% 33232 34848
- #17 Short offline Completed without error 00% 1024 -
- #18 Reserved (0x11) Aborted by host 40% 10240 -
- #19 Extended offline Completed without error 60% 16528 -
- #20 Reserved (0x8a) Completed without error 40% 2112 -
- #21 Offline Completed without error 00% 344 -
- Device does not support Selective Self Tests/Logging
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement