API tools faq
paste
Advertisement
Guest User

Kernel Boot Log

a guest
Jan 15th, 2017
203
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 26.18 KB | None | 0 0
raw download clone embed print report
  1. Hit any key to stop autoboot:  0
  2. AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  3. flags: ncq stag pm led clo only pmp pio slum part
  4. No port device detected!
  5. ** Bad device size - sata 0 **
  6. switch to partitions #0, OK
  7. mmc0 is current device
  8. 4437 bytes read in 40 ms (107.4 KiB/s)
  9. ## Executing script at 10008000
  10. ** File not found uEnv.txt **
  11. 48169 bytes read in 218 ms (214.8 KiB/s)
  12. only CEA modes allowed on HDMI port
  13. ----------- trying to load /initrd.img
  14. 3419146 bytes read in 1134 ms (2.9 MiB/s)
  15. 5418584 bytes read in 843 ms (6.1 MiB/s)
  16. Kernel image @ 0x10800000 [ 0x000000 - 0x52ae58 ]
  17. ## Flattened Device Tree blob at 13000000
  18.    Booting using the fdt blob at 0x13000000
  19.    reserving fdt memory region: addr=13000000 size=c000
  20.    Using Device Tree in place at 13000000, end 1300efff
  21.  
  22. Starting kernel ...
  23.  
  24. Booting Linux on physical CPU 0x0
  25. Initializing cgroup subsys cpu
  26. Linux version 3.14.52-g952e91e-dirty (root@osboxes) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) ) #31 SMP PREEMPT Sat Jan 14 19:39:40 GMT 2017
  27. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  28. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  29. Machine model: Freescale i.MX6 Quad Nitrogen6 Max Board
  30. cma: CMA: reserved 320 MiB at 62000000
  31. Memory policy: Data cache writealloc
  32. PERCPU: Embedded 8 pages/cpu @d0111000 s8448 r8192 d16128 u32768
  33. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 979775
  34. Kernel command line: cpu=6Q board=nitrogen6_max mxc_hdmi.only_cea=1 console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait fixrtc root=/dev/mmcblk0p1 wlcore.mac=00:19:B8:02:da:b1
  35. PID hash table entries: 4096 (order: 2, 16384 bytes)
  36. Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  37. Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  38. Memory: 3557516K/3932156K available (6915K kernel code, 346K rwdata, 2260K rodata, 356K init, 440K bss, 374640K reserved, 2260988K highmem)
  39. Virtual kernel memory layout:
  40.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  41.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  42.     vmalloc : 0xe6800000 - 0xff000000   ( 392 MB)
  43.     lowmem  : 0x80000000 - 0xe6000000   (1632 MB)
  44.     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  45.     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
  46.       .text : 0x80008000 - 0x808fe044   (9177 kB)
  47.       .init : 0x808ff000 - 0x80958100   ( 357 kB)
  48.       .data : 0x8095a000 - 0x809b08c0   ( 347 kB)
  49.        .bss : 0x809b08cc - 0x80a1e8dc   ( 441 kB)
  50. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  51. Preemptible hierarchical RCU implementation.
  52. NR_IRQS:16 nr_irqs:16 16
  53. L310 cache controller enabled
  54. l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x32470000, Cache size: 1024 kB
  55. Switching to timer-based delay loop
  56. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
  57. Console: colour dummy device 80x30
  58. Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  59. pid_max: default: 32768 minimum: 301
  60. Security Framework initialized
  61. AppArmor: AppArmor initialized
  62. Mount-cache hash table entries: 4096 (order: 2, 16384 bytes)
  63. Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes)
  64. CPU: Testing write buffer coherency: ok
  65. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  66. Setting up static identity map for 0x106c7030 - 0x106c7088
  67. CPU1: Booted secondary processor
  68. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  69. CPU2: Booted secondary processor
  70. CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  71. CPU3: Booted secondary processor
  72. CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  73. Brought up 4 CPUs
  74. SMP: Total of 4 processors activated (24.00 BogoMIPS).
  75. CPU: All CPU(s) started in SVC mode.
  76. devtmpfs: initialized
  77. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  78. pinctrl core: initialized pinctrl subsystem
  79. regulator-dummy: no parameters
  80. NET: Registered protocol family 16
  81. DMA: preallocated 256 KiB pool for atomic coherent allocations
  82. cpuidle: using governor ladder
  83. cpuidle: using governor menu
  84. CPU identified as i.MX6Q, silicon rev 1.2
  85. Use WDOG1 as reset source
  86. syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
  87. vdd1p1: 800 <--> 1375 mV at 1100 mV
  88. vdd3p0: 2625 <--> 3400 mV at 3000 mV
  89. vdd2p5: 2000 <--> 2750 mV at 2400 mV
  90. vddarm: 725 <--> 1450 mV at 1150 mV
  91. vddpu: 725 <--> 1450 mV at 1150 mV
  92. vddsoc: 725 <--> 1450 mV at 1175 mV
  93. syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
  94. syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
  95. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  96. hw-breakpoint: maximum watchpoint size is 4 bytes.
  97. imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  98. bio: create slab <bio-0> at 0
  99. mxs-dma 110000.dma-apbh: initialized
  100. 1P8V: 1800 mV
  101. 2P5V: 2500 mV
  102. 3P3V: 3300 mV
  103. usb_otg_vbus: 5000 mV
  104. wlan-en: 3300 mV
  105. 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
  106. 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX
  107. console [ttymxc1] enabled
  108. 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX
  109. serial_imx_probe_dt:170
  110. serial_imx_probe_dt:167
  111. serial_imx_probe_dt:56
  112. serial_imx_probe_dt:168
  113. 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 62, base_baud = 5000000) is a IMX
  114. SCSI subsystem initialized
  115. usbcore: registered new interface driver usbfs
  116. usbcore: registered new interface driver hub
  117. usbcore: registered new device driver usb
  118. usbphy_nop1.12 supply vcc not found, using dummy regulator
  119. usbphy_nop2.13 supply vcc not found, using dummy regulator
  120. i2c i2c-0: IMX I2C adapter registered
  121. i2c i2c-1: IMX I2C adapter registered
  122. i2c i2c-2: IMX I2C adapter registered
  123. i2c i2c-1: Added multiplexed i2c bus 3
  124. i2c i2c-1: Added multiplexed i2c bus 4
  125. i2c-mux-gpio i2cmux.23: 2 port mux on 21a4000.i2c adapter
  126. i2c i2c-2: Added multiplexed i2c bus 5
  127. i2c-mux-gpio i2cmux.24: 1 port mux on 21a8000.i2c adapter
  128. media: Linux media interface: v0.10
  129. Linux video capture interface: v2.00
  130. pps_core: LinuxPPS API ver. 1 registered
  131. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  132. PTP clock support registered
  133. imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  134. imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  135. mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
  136. mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
  137. MIPI CSI2 driver module loaded
  138. Advanced Linux Sound Architecture Driver Initialized.
  139. Bluetooth: Core ver 2.18
  140. NET: Registered protocol family 31
  141. Bluetooth: HCI device and connection manager initialized
  142. Bluetooth: HCI socket layer initialized
  143. Bluetooth: L2CAP socket layer initialized
  144. Bluetooth: SCO socket layer initialized
  145. NetLabel: Initializing
  146. NetLabel:  domain hash size = 128
  147. NetLabel:  protocols = UNLABELED CIPSOv4
  148. NetLabel:  unlabeled traffic allowed by default
  149. Switched to clocksource mxc_timer1
  150. AppArmor: AppArmor Filesystem Enabled
  151. NET: Registered protocol family 2
  152. TCP established hash table entries: 16384 (order: 4, 65536 bytes)
  153. TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  154. TCP: Hash tables configured (established 16384 bind 16384)
  155. TCP: reno registered
  156. UDP hash table entries: 1024 (order: 3, 32768 bytes)
  157. UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  158. NET: Registered protocol family 1
  159. RPC: Registered named UNIX socket transport module.
  160. RPC: Registered udp transport module.
  161. RPC: Registered tcp transport module.
  162. RPC: Registered tcp NFSv4.1 backchannel transport module.
  163. Trying to unpack rootfs image as initramfs...
  164. Freeing initrd memory: 3336K (83a00000 - 83d42000)
  165. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  166. imx rpmsg driver is registered.
  167. imx_busfreq busfreq.16: DDR medium rate not supported.
  168. Bus freq driver module loaded
  169. futex hash table entries: 1024 (order: 4, 65536 bytes)
  170. audit: initializing netlink subsys (disabled)
  171. audit: type=2000 audit(1.050:1): initialized
  172. bounce pool size: 64 pages
  173. VFS: Disk quotas dquot_6.5.2
  174. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  175. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  176. NFS: Registering the id_resolver key type
  177. Key type id_resolver registered
  178. Key type id_legacy registered
  179. fuse init (API version 7.22)
  180. msgmni has been set to 3178
  181. io scheduler noop registered
  182. io scheduler deadline registered
  183. io scheduler cfq registered (default)
  184. backlight_lcd.17 supply power not found, using dummy regulator
  185. backlight_lvds.18 supply power not found, using dummy regulator
  186. backlight_lvds2.19 supply power not found, using dummy regulator
  187. i2c-core: driver [tfp410] using legacy suspend method
  188. i2c-core: driver [tfp410] using legacy resume method
  189. add tfp410 i2c driver
  190. ldb ldb.15: failed to find valid LVDS channel
  191. ldb: probe of ldb.15 failed with error -22
  192. mxc_sdc_fb fb.21: registered mxc display driver lcd
  193. mxc_sdc_fb fb.21: 800x480 h_sync,r,l: 20,60,40  v_sync,l,u: 10,10,10 pixclock=27000000 Hz
  194. imx-ipuv3 2400000.ipu: ipu1_di0_pre_sel=540000000
  195. imx-ipuv3 2400000.ipu: use special clk parent
  196. imx-ipuv3 2400000.ipu: disp=0, pixel_clk=27000000 27000000 parent=108000000 div=4
  197. find_field: [0] = 0x7ff, max=23
  198. find_field: [1] = 0xfff, max=23
  199. find_field: [2] = 0x17ff, max=23
  200. find_field: [0] = 0x820, max=29
  201. mxc_sdc_fb fb.21: 800x480 h_sync,r,l: 20,60,40  v_sync,l,u: 10,10,10 pixclock=27000000 Hz
  202. imx-ipuv3 2400000.ipu: ipu1_di0_pre_sel=540000000
  203. imx-ipuv3 2400000.ipu: use special clk parent
  204. imx-ipuv3 2400000.ipu: disp=0, pixel_clk=27000000 27000000 parent=108000000 div=4
  205. Console: switching to colour frame buffer device 100x30
  206. imx-sdma 20ec000.sdma: no iram assigned, using external mem
  207. imx-sdma 20ec000.sdma: no event needs to be remapped
  208. imx-sdma 20ec000.sdma: loaded firmware 3.2
  209. imx-sdma 20ec000.sdma: initialized
  210. serial: Freescale lpuart driver
  211. imx sema4 driver is registered.
  212. [drm] Initialized drm 1.1.0 20060810
  213. [drm] Initialized vivante 1.0.0 20120216 on minor 0
  214. brd: module loaded
  215. loop: module loaded
  216. [max77823_init] start
  217. ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
  218. ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
  219. ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
  220. ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  221. ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  222. ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  223. ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  224. scsi0 : ahci_platform
  225. ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
  226. m25p80 spi0.0: sst25vf016b (2048 Kbytes)
  227. 3 ofpart partitions found on MTD device spi0.0
  228. Creating 3 MTD partitions on "spi0.0":
  229. 0x000000000000-0x0000000c0000 : "U-Boot"
  230. 0x0000000c0000-0x0000000c2000 : "env"
  231. 0x0000000c2000-0x000000200000 : "splash"
  232. spi_imx 2008000.ecspi: probed
  233. CAN device driver interface
  234. 2090000.can supply xceiver not found, using dummy regulator
  235. flexcan 2090000.can: device registered (reg_base=e69f8000, irq=142)
  236. phyirq=188
  237. 2188000.ethernet supply phy not found, using dummy regulator
  238. pps pps0: new PPS source ptp0
  239. libphy: fec_enet_mii_bus: probed
  240. fec 2188000.ethernet eth0: registered PHC device 0
  241. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  242. ehci-pci: EHCI PCI platform driver
  243. usbcore: registered new interface driver cdc_acm
  244. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  245. usbcore: registered new interface driver usb-storage
  246. usbcore: registered new interface driver usbserial
  247. usbcore: registered new interface driver usbserial_generic
  248. usbserial: USB Serial support registered for generic
  249. usbcore: registered new interface driver cp210x
  250. usbserial: USB Serial support registered for cp210x
  251. usbcore: registered new interface driver ftdi_sio
  252. usbserial: USB Serial support registered for FTDI USB Serial Device
  253. usbcore: registered new interface driver keyspan
  254. usbserial: USB Serial support registered for Keyspan - (without firmware)
  255. usbserial: USB Serial support registered for Keyspan 1 port adapter
  256. usbserial: USB Serial support registered for Keyspan 2 port adapter
  257. usbserial: USB Serial support registered for Keyspan 4 port adapter
  258. usbcore: registered new interface driver pl2303
  259. usbserial: USB Serial support registered for pl2303
  260. usbcore: registered new interface driver qcserial
  261. usbserial: USB Serial support registered for Qualcomm USB modem
  262. 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  263. setup_reset_gpios:-2, flags 0
  264. setup_reset_gpios:204, flags 1
  265. setup_reset_gpios:-2, flags 0
  266. 2184200.usb supply vbus not found, using dummy regulator
  267. ci_hdrc ci_hdrc.1: doesn't support gadget
  268. ci_hdrc ci_hdrc.1: EHCI Host Controller
  269. ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  270. ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  271. hub 1-0:1.0: USB hub found
  272. hub 1-0:1.0: 1 port detected
  273. mousedev: PS/2 mouse device common for all mice
  274. rtc-rv4162 0-0068: rv4162_probe: chip found: flags 0x00
  275. rtc-rv4162 0-0068: rtc core: registered rtc-rv4162 as rtc0
  276. snvs_rtc 20cc034.snvs-rtc-lp: can't get snvs-rtc clock
  277. check_alarm_past: alarm in the past
  278. snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1
  279. i2c /dev entries driver
  280. mxc_v4l2_output v4l2_out.33: V4L2 device registered as video16
  281. mxc_v4l2_output v4l2_out.33: V4L2 device registered as video17
  282. i2c-core: driver [mag3110] using legacy suspend method
  283. i2c-core: driver [mag3110] using legacy resume method
  284. imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
  285. ata1: SATA link down (SStatus 0 SControl 300)
  286. ahci-imx 2200000.sata: no device found, disabling link.
  287. ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
  288. device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
  289. sdhci: Secure Digital Host Controller Interface driver
  290. sdhci: Copyright(c) Pierre Ossman
  291. sdhci-pltfm: SDHCI platform and OF driver helper
  292. mmc2: no vqmmc regulator found
  293. mmc2: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  294. sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
  295. mmc0: no vqmmc regulator found
  296. sdhci-esdhc-imx 2194000.usdhc: card claims to support voltages below defined range
  297. mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
  298. mmc2: new SDIO card at address 0001
  299. mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  300. sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode
  301. usb 1-1: new high-speed USB device number 2 using ci_hdrc
  302. mmc1: no vqmmc regulator found
  303. mmc0: host does not support reading read-only switch. assuming write-enable.
  304. mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
  305. mmc0: new high speed SDHC card at address 1234
  306. mmcblk0: mmc0:1234 SA16G 14.4 GiB
  307. mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  308. mxc_vpu 2040000.vpu: VPU initialized
  309. mxc_hdmi_cec hdmi_cec.4: HDMI CEC initialized
  310.  mmcblk0: p1
  311. mmc1: BKOPS_EN bit is not set
  312. hub 1-1:1.0: USB hub found
  313. hub 1-1:1.0: 3 ports detected
  314. mmc1: new high speed DDR MMC card at address 0001
  315. mmcblk1: mmc1:0001 S10004 3.56 GiB
  316. mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
  317. mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
  318. mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB
  319.  mmcblk1: unknown partition table
  320.  mmcblk1boot1: unknown partition table
  321.  mmcblk1boot0: unknown partition table
  322. caam 2100000.caam: Instantiated RNG4 SH0
  323. caam 2100000.caam: Instantiated RNG4 SH1
  324. caam 2100000.caam: device ID = 0x0a160100 (Era 4)
  325. caam 2100000.caam: job rings = 2, qi = 0
  326. caam algorithms registered in /proc/crypto
  327. caam_jr 2101000.jr0: registering rng-caam
  328. usbcore: registered new interface driver usbhid
  329. usbhid: USB HID core driver
  330. sgtl5000 0-000a: sgtl5000 revision 0x11
  331. fsl-hdmi-dai hdmi_audio.3: failed to probe. Load HDMI-video first.
  332. fsl-hdmi-dai: probe of hdmi_audio.3 failed with error -12
  333. 0-000a: 1200 mV normal
  334. sgtl5000 0-000a: Using internal LDO instead of VDDD
  335. imx-sgtl5000 sound.27: sgtl5000 <-> 2028000.ssi mapping ok
  336. imx-audio-hdmi sound-hdmi.28: initialize HDMI-audio failed. load HDMI-video first!
  337. NET: Registered protocol family 26
  338. TCP: cubic registered
  339. NET: Registered protocol family 10
  340. sit: IPv6 over IPv4 tunneling driver
  341. NET: Registered protocol family 17
  342. can: controller area network core (rev 20120528 abi 9)
  343. NET: Registered protocol family 29
  344. can: raw protocol (rev 20120528)
  345. can: broadcast manager protocol (rev 20120528 t)
  346. can: netlink gateway (rev 20130117) max_hops=1
  347. Bluetooth: RFCOMM TTY layer initialized
  348. Bluetooth: RFCOMM socket layer initialized
  349. Bluetooth: RFCOMM ver 1.11
  350. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  351. Bluetooth: BNEP filters: protocol multicast
  352. Bluetooth: BNEP socket layer initialized
  353. 8021q: 802.1Q VLAN Support v1.8
  354. rfkill_gpio bt_rfkill.20: bt_rfkill device registered.
  355. Key type dns_resolver registered
  356. Registering SWP/SWPB emulation handler
  357. AppArmor: AppArmor sha1 policy hashing enabled
  358. imx6_pcie_probe: reset gp 191
  359. imx6q-pcie 1ffc000.pcie: phy link never came up
  360. imx6q-pcie 1ffc000.pcie: Failed to bring link up!
  361. imx6q-pcie 1ffc000.pcie: failed to initialize host
  362. imx6q-pcie: probe of 1ffc000.pcie failed with error -22
  363. usb_otg_vbus: disabling
  364. regulator-dummy: disabling
  365. imx mcc test is registered.
  366. rtc-rv4162 0-0068: setting system clock to 2017-01-15 18:48:01 UTC (1484506081)
  367. ALSA device list:
  368.   #0: imx6q-nitrogen6_max-sgtl5000
  369. Freeing unused kernel memory: 356K (808ff000 - 80958000)
  370. Loading, please wait...
  371. systemd-udevd[198]: starting version 204
  372. Begin: Loading essential drivers ... done.
  373. Begin: Running /scripts/init-premount ... done.
  374. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  375. Begin: Running /scripts/local-premount ... done.
  376. EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem
  377. EXT4-fs (mmcblk0p1): write access will be enabled during recovery
  378. random: nonblocking pool is initialized
  379. EXT4-fs (mmcblk0p1): recovery complete
  380. EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  381. Begin: Running /scripts/local-bottom ... done.
  382. done.
  383. Begin: Running /scripts/init-bottom ... done.
  384. init: plymouth-upstart-bridge main process (261) terminated with status 1
  385. init: plymouth-upstart-bridge main process ended, respawning
  386. init: plymouth-upstart-bridge main process (270) terminated with status 1
  387. init: plymouth-upstart-bridge main process ended, respawning
  388. init: plymouth-upstart-bridge main process (273) terminated with status 1
  389. init: plymouth-upstart-bridge main process ended, respawning
  390. init: mounted-proc main process (286) terminated with status 1
  391. tc358743_read_reg:reg=0 ret=-5
  392. tc358743_probe:cannot find camera
  393. tc358743_probe: failed, error=-19
  394. ov5640_read_reg:write reg error:reg=300a
  395. ft5x06-ts 2-0038: Could not detect touch screen -19.
  396. ft5x06-ts 3-0038: Could not detect touch screen -19.
  397. tsc2004_reset: write_cmd -5
  398. tsc2004 2-0048: Failed to reset TSC -5
  399. atmel_mxt_ts 2-004a: not detected
  400. egalax_ts 2-0004: Failed to read firmware version
  401. ili210x_i2c 2-0041: i2c transfer failed
  402. ili210x_i2c 2-0041: Failed to get firmware version, err: -5
  403. Goodix-TS 2-0014: i2c test failed attempt 1: -5
  404. Goodix-TS 2-0014: i2c test failed attempt 2: -5
  405. Goodix-TS 2-0014: I2C communication failure: -5
  406. Goodix-TS 2-005d: i2c test failed attempt 1: -5
  407. Goodix-TS 2-005d: i2c test failed attempt 2: -5
  408. Goodix-TS 2-005d: I2C communication failure: -5
  409. mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
  410. mxc_v4l_open: Mxc Camera no sensor ipu1/csi1
  411. mxc_v4l_open: Mxc Camera no sensor ipu0/csi1
  412. mxc_v4l_open: Mxc Camera no sensor ipu0/csi0
  413. ov5640_read_reg(mipi):reg=300a ret=-5
  414. ov5642_read_reg:write reg error:reg=300a
  415.  * Starting Mount filesystems on boot                                    [ OK ]
  416.  * Starting Populate /dev filesystem                                     [ OK ]
  417.  * Starting Populate and link to /run filesystem                         [ OK ]
  418.  * Stopping Populate /dev filesystem                                     [ OK ]
  419.  * Stopping Track if upstart is running in a container                   [ OK ]
  420.  * Stopping Populate and link to /run filesystem                         [ OK ]
  421.  * Starting Signal sysvinit that virtual filesystems are mounted         [ OK ]
  422.  * Starting Signal sysvinit that virtual filesystems are mounted         [ OK ]
  423.  * Starting Bridge udev events into upstart                              [ OK ]
  424.  * Starting Signal sysvinit that remote filesystems are mounted          [ OK ]
  425.  * Starting device node and kernel event manager                         [ OK ]
  426.  * Starting Signal sysvinit that the rootfs is mounted                   [ OK ]
  427.  * Starting load modules from /etc/modules                               [ OK ]
  428.  * Starting cold plug devices                                            [ OK ]
  429.  * Starting log initial device creation                                  [ OK ]
  430.  * Starting Clean /tmp directory                                         [ OK ]
  431.  * Stopping Clean /tmp directory                                         [ OK ]
  432.  * Stopping load modules from /etc/modules                               [ OK ]
  433.  * Starting Signal sysvinit that local filesystems are mounted           [ OK ]
  434.  * Starting restore software rfkill state                                [ OK ]
  435.  * Stopping restore software rfkill state                                [ OK ]
  436.  * Stopping Mount filesystems on boot                                    [ OK ]
  437.  * Starting flush early job output to logs                               [ OK ]
  438.  * Starting setting xorg.conf                                            [ OK ]
  439.  * Stopping setting xorg.conf                                            [ OK ]
  440.  * Stopping flush early job output to logs                               [ OK ]
  441.  * Starting userspace bootsplash                                         [ OK ]
  442.  * Starting Send an event to indicate plymouth is up                     [ OK ]
  443.  * Starting D-Bus system message bus                                     [ OK ]
  444.  * Stopping userspace bootsplash                                         [ OK ]
  445.  * Stopping Send an event to indicate plymouth is up                     [ OK ]
  446.  * Starting configure network device security                            [ OK ]
  447.  * Starting SystemD login management service                             [ OK ]
  448.  * Starting configure network device                                     [ OK ]
  449.  * Starting configure network device security                            [ OK ]
  450.  * Stopping cold plug devices                                            [ OK ]
  451.  * Starting configure network device                                     [ OK ]
  452.  * Stopping log initial device creation                                  [ OK ]
  453.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  454.  * Starting configure network device security                            [ OK ]
  455.  * Starting system logging daemon                                        [ OK ]
  456.  * Starting save udev log and update rules                               [ OK ]
  457.  * Starting Reload cups, upon starting avahi-daemon to make sure remote q[ OK ]are populated
  458.  * Starting bluetooth daemon                                             [ OK ]
  459.  * Stopping save udev log and update rules                               [ OK ]
  460.  * Stopping Reload cups, upon starting avahi-daemon to make sure remote q[ OK ]are populated
  461.  * Starting configure network device security                            [ OK ]
  462.  * Starting configure network device security                            [ OK ]
  463.  * Starting configure network device                                     [ OK ]
  464.  * Starting configure network device                                     [ OK ]
  465.  * Starting Mount network filesystems                                    [ OK ]
  466.  * Starting Failsafe Boot Delay                                          [ OK ]
  467.  * Starting configure network device security                            [ OK ]
  468.  * Stopping Mount network filesystems                                    [ OK ]
  469.  * Starting Mount network filesystems                                    [ OK ]
  470.  * Stopping Failsafe Boot Delay                                          [ OK ]
  471.  * Starting configure network device                                     [ OK ]
  472.  * Starting System V initialisation compatibility                        [ OK ]
  473.  * Starting modem connection manager                                     [ OK ]
  474.  * Starting configure network device security                            [ OK ]
  475.  * Starting configure virtual network devices                            [ OK ]
  476.  * Starting configure network device security                            [ OK ]
  477.  * Stopping Mount network filesystems                                    [ OK ]
  478.  * Starting configure network device                                     [ OK ]
  479.  * Starting Bridge socket events into upstart                            [ OK ]
  480.  * Starting Bridge file events into upstart                              [ OK ]
  481.  * Setting up X socket directories...                                    [ OK ]
  482.  * Starting network connection manager                                   [ OK ]
  483.  * Stopping System V initialisation compatibility                        [ OK ]
  484.  * Starting System V runlevel compatibility                              [ OK ]
  485.  * Starting Freescale autohdmi utility                                   [ OK ]
  486.  * Starting save kernel messages                                         [ OK ]
  487.  * Starting anac(h)ronistic cron                                         [ OK ]
  488.  * Starting regular background program processing daemon                 [ OK ]
  489.  * Stopping anac(h)ronistic cron                                         [ OK ]
  490.  * Stopping save kernel messages                                         [ OK ]
  491.  * Starting automatic crash report generation                            [ OK ]
  492.  * Starting cups-browsed - Bonjour remote printer browsing daemon        [ OK ]
  493.  * Setting sysfs variables...                                            [ OK ]pping Restore Sound Card State
  494. [ OK ]
  495.  * Starting OpenSSH server                                               [ OK ]
  496.                                                                          [ OK ]
  497. saned disabled; edit /etc/default/saned
  498.  
  499. Ubuntu 14.04.4 LTS nitrogen ttymxc1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!