API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Nov 30th, 2016
196
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.53 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #2 Sat Oct 20 12:31:22 UTC 2012
  2. [ 0.000000] MyLoader: sysp=5306ac2e, boardp=8e303482, parts=f904f9ea
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Atheros AR9330 rev 1
  6. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Zone PFN ranges:
  11. [ 0.000000] Normal 0x00000000 -> 0x00002000
  12. [ 0.000000] Movable zone start PFN for each node
  13. [ 0.000000] Early memory PFN ranges
  14. [ 0.000000] 0: 0x00000000 -> 0x00002000
  15. [ 0.000000] On node 0 totalpages: 8192
  16. [ 0.000000] free_area_init_node: node 0, pgdat 802ef080, node_mem_map 81000000
  17. [ 0.000000] Normal zone: 64 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 8128 pages, LIFO batch:0
  20. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  21. [ 0.000000] pcpu-alloc: [0] 0
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  23. [ 0.000000] Kernel command line: board=TL-MR3020 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
  24. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  27. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  28. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 29008k/32768k available (2209k kernel code, 3760k reserved, 412k data, 212k init, 0k highmem)
  32. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:51
  34. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  35. [ 0.080000] pid_max: default: 32768 minimum: 301
  36. [ 0.080000] Mount-cache hash table entries: 512
  37. [ 0.090000] NET: Registered protocol family 16
  38. [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
  39. [ 0.100000] MIPS: machine is TP-LINK TL-MR3020
  40. [ 0.350000] bio: create slab <bio-0> at 0
  41. [ 0.360000] Switching to clocksource MIPS
  42. [ 0.360000] NET: Registered protocol family 2
  43. [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.370000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  45. [ 0.370000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  46. [ 0.380000] TCP: Hash tables configured (established 1024 bind 1024)
  47. [ 0.390000] TCP reno registered
  48. [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  49. [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  50. [ 0.400000] NET: Registered protocol family 1
  51. [ 0.410000] PCI: CLS 0 bytes, default 32
  52. [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  53. [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  54. [ 0.440000] msgmni has been set to 56
  55. [ 0.440000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  56. [ 0.450000] io scheduler noop registered
  57. [ 0.450000] io scheduler deadline registered (default)
  58. [ 0.460000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  59. [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
  60. [ 0.480000] console [ttyATH0] enabled, bootconsole disabled
  61. [ 0.490000] m25p80 spi0.0: found w25q32, expected m25p80
  62. [ 0.490000] m25p80 spi0.0: w25q32 (4096 Kbytes)
  63. [ 0.500000] 5 tp-link partitions found on MTD device spi0.0
  64. [ 0.510000] Creating 5 MTD partitions on "spi0.0":
  65. [ 0.510000] 0x000000000000-0x000000020000 : "u-boot"
  66. [ 0.520000] 0x000000020000-0x0000001096a8 : "kernel"
  67. [ 0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  68. [ 0.530000] 0x0000001096a8-0x0000003f0000 : "rootfs"
  69. [ 0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  70. [ 0.550000] mtd: partition "rootfs" set to be root filesystem
  71. [ 0.560000] mtd: partition "rootfs_data" created automatically, ofs=2D0000, len=120000
  72. [ 0.570000] 0x0000002d0000-0x0000003f0000 : "rootfs_data"
  73. [ 0.570000] 0x0000003f0000-0x000000400000 : "art"
  74. [ 0.580000] 0x000000020000-0x0000003f0000 : "firmware"
  75. [ 0.600000] ag71xx_mdio: probed
  76. [ 0.610000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  77. [ 1.160000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:00 [uid=004dd041, driver=Generic PHY]
  78. [ 1.170000] TCP cubic registered
  79. [ 1.170000] NET: Registered protocol family 17
  80. [ 1.180000] Bridge firewalling registered
  81. [ 1.180000] 8021q: 802.1Q VLAN Support v1.8
  82. [ 1.190000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  83. [ 1.200000] Freeing unused kernel memory: 212k freed
  84. [ 3.050000] Registered led device: tp-link:green:3g
  85. [ 3.050000] Registered led device: tp-link:green:wlan
  86. [ 3.050000] Registered led device: tp-link:green:lan
  87. [ 3.050000] Registered led device: tp-link:green:wps
  88. [ 5.160000] eth0: link up (100Mbps/Full duplex)
  89. [ 6.350000] JFFS2 notice: (441) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 12 of xref (0 dead, 2 orphan) found.
  90. [ 7.020000] SCSI subsystem initialized
  91. [ 7.190000] usbcore: registered new interface driver usbfs
  92. [ 7.200000] usbcore: registered new interface driver hub
  93. [ 7.200000] usbcore: registered new device driver usb
  94. [ 7.760000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  95. [ 7.770000] ehci-platform ehci-platform: Generic Platform EHCI Controller
  96. [ 7.770000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  97. [ 7.810000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  98. [ 7.830000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  99. [ 7.830000] hub 1-0:1.0: USB hub found
  100. [ 7.830000] hub 1-0:1.0: 1 port detected
  101. [ 7.850000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  102. [ 7.890000] uhci_hcd: USB Universal Host Controller Interface driver
  103. [ 7.950000] Initializing USB Mass Storage driver...
  104. [ 7.960000] usbcore: registered new interface driver usb-storage
  105. [ 7.960000] USB Mass Storage support registered.
  106. [ 8.160000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  107. [ 8.390000] scsi0 : usb-storage 1-1:1.3
  108. [ 9.400000] scsi 0:0:0:0: Direct-Access HUAWEI TF CARD Storage 2.31 PQ: 0 ANSI: 2
  109. [ 9.410000] sd 0:0:0:0: [sda] 31422464 512-byte logical blocks: (16.0 GB/14.9 GiB)
  110. [ 9.420000] sd 0:0:0:0: [sda] Write Protect is off
  111. [ 9.420000] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
  112. [ 9.430000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  113. [ 9.440000] sda: sda1
  114. [ 9.450000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  115. [ 28.770000] EXT4-fs (sda1): recovery complete
  116. [ 28.780000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  117. [ 28.960000] eth0: link down
  118. [ 30.390000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  119. [ 30.390000] Backport based on wireless-testing.git master-2012-09-07
  120. [ 30.400000] compat.git: wireless-testing.git
  121. [ 30.430000] cfg80211: Calling CRDA to update world regulatory domain
  122. [ 30.440000] cfg80211: World regulatory domain updated:
  123. [ 30.440000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  124. [ 30.450000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  125. [ 30.460000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  126. [ 30.470000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  127. [ 30.470000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  128. [ 30.480000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  129. [ 31.110000] ath: EEPROM regdomain: 0x0
  130. [ 31.110000] ath: EEPROM indicates default country code should be used
  131. [ 31.110000] ath: doing EEPROM country->regdmn map search
  132. [ 31.110000] ath: country maps to regdmn code: 0x3a
  133. [ 31.110000] ath: Country alpha2 being used: US
  134. [ 31.110000] ath: Regpair used: 0x3a
  135. [ 31.120000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  136. [ 31.120000] Registered led device: ath9k-phy0
  137. [ 31.120000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  138. [ 31.130000] cfg80211: Calling CRDA for country: US
  139. [ 31.130000] cfg80211: Regulatory domain changed to country: US
  140. [ 31.140000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  141. [ 31.140000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  142. [ 31.150000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  143. [ 31.160000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  144. [ 31.170000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  145. [ 31.170000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  146. [ 31.180000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  147. [ 31.450000] PPP generic driver version 2.4.2
  148. [ 31.710000] ip_tables: (C) 2000-2006 Netfilter Core Team
  149. [ 31.830000] NET: Registered protocol family 24
  150. [ 31.880000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
  151. [ 32.300000] usbcore: registered new interface driver usbserial
  152. [ 32.300000] USB Serial support registered for generic
  153. [ 32.310000] usbcore: registered new interface driver usbserial_generic
  154. [ 32.310000] usbserial: USB Serial Driver core
  155. [ 32.370000] USB Serial support registered for GSM modem (1-port)
  156. [ 32.380000] usbcore: registered new interface driver option
  157. [ 32.380000] option: v0.7.2:USB Driver for GSM modems
  158. [ 35.610000] device eth0 entered promiscuous mode
  159. [ 36.420000] eth0: link up (100Mbps/Full duplex)
  160. [ 36.420000] br-lan: port 1(eth0) entered forwarding state
  161. [ 36.430000] br-lan: port 1(eth0) entered forwarding state
  162. [ 38.430000] br-lan: port 1(eth0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!