Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Stock firmware boot and then OpenWRT by bassman flash process and its boot:
- ## Booting image at 9f020000 ...
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Booting Atheros AR934x
- Linux version 2.6.31--LSDK-9.2.0_U5.508 (root@localhost.localdomain) (gcc version 4.3.3 (GCC) ) #5 Thu Jun 20 17:38:17 CST 2013
- flash_size passed from bootloader = 4
- Ram size passed from bootloader =33554432
- CPU revision is: 0001974c (MIPS 74Kc)
- ath_sys_frequency: cpu srif ddr srif cpu 535 ddr 400 ahb 200
- Determined physical RAM map:
- memory: 02000000 @ 00000000 (usable)
- Zone PFN ranges:
- Normal 0x00000000 -> 0x00002000
- Movable zone start PFN for each node
- early_node_map[1] active PFN ranges
- 0: 0x00000000 -> 0x00002000
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- Kernel command line: console=ttyS0,115200 root=31:2 rootfstype=squashfs init=/sbin/init mtdparts=ath-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(art) mem=32M
- PID hash table entries: 128 (order: 7, 512 bytes)
- Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- Writing ErrCtl register=00000000
- Readback ErrCtl register=00000000
- Memory: 30124k/32768k available (1728k kernel code, 2644k reserved, 429k data, 112k init, 0k highmem)
- NR_IRQS:128
- plat_time_init: plat time init done
- Calibrating delay loop... 267.26 BogoMIPS (lpj=534528)
- Mount-cache hash table entries: 512
- NET: Registered protocol family 16
- bio: create slab <bio-0> at 0
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- net_link: create socket ok.
- TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- TCP: Hash tables configured (established 1024 bind 1024)
- TCP reno registered
- NET: Registered protocol family 1
- ATH GPIOC major 0
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- msgmni has been set to 58
- io scheduler noop registered
- io scheduler deadline registered (default)
- Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
- console [ttyS0] enabled
- PPP generic driver version 2.4.2
- NET: Registered protocol family 24
- 5 cmdlinepart partitions found on MTD device ath-nor0
- Creating 5 MTD partitions on "ath-nor0":
- 0x000000000000-0x000000020000 : "u-boot"
- 0x000000020000-0x000000120000 : "kernel"
- 0x000000120000-0x0000003e0000 : "rootfs"
- 0x0000003e0000-0x0000003f0000 : "config"
- 0x0000003f0000-0x000000400000 : "art"
- ->Oops: flash id 0x10215 .
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- Port Status 1c000004
- ath-ehci ath-ehci.0: ATH EHCI
- ath-ehci ath-ehci.0: new USB bus registered, assigned bus number 1
- ehci_reset Intialize USB CONTROLLER in host mode: 13
- ehci_reset Port Status 1c000000
- ath-ehci ath-ehci.0: irq 3, io mem 0x1b000000
- ehci_reset Intialize USB CONTROLLER in host mode: 13
- ehci_reset Port Status 1c000000
- ath-ehci ath-ehci.0: USB 2.0 started, EHCI 1.00
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- Ooops, why the devices couldn't been initialed?
- TCP cubic registered
- NET: Registered protocol family 17
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- athwdt_init: Registering WDT success
- ath_otp_init: Registering OTP success
- ath_clksw_init: Registering
- init started: BusyBox v1.01 (2013.05.24-01:49+0000) multi-call binary
- This Board use 2.6.31
- xt_time: kernel timezone is -0000
- nf_conntrack version 0.5.0 (512 buckets, 5120 max)
- ip_tables: (C) 2000-2006 Netfilter Core Team
- insmod: cannot open module `/lib/modules/2.6.31/kernel/iptable_raw.ko': No such file or directory
- insmod: cannot open module `/lib/modules/2.6.31/kernel/flashid.ko': No such file or directory
- PPPoL2TP kernel driver, V1.0
- PPTP driver version 0.8.3
- insmod: cannot open module `/lib/modules/2.6.31/kernel/harmony.ko': No such file or directory
- (none) mips #5 Thu Jun 20 17:38:17 CST 2013 (none)
- (none) login: Now flash open!
- Now flash open!
- ====>>>>ucSystemMode_init 267 lan mode = 0
- ====>>>>ucSystemMode_init 268 systemMode = 1
- vlan init params sucess.
- ATHR_GMAC: Length per segment 1536
- ATHR_GMAC: fifo cfg 3 01f00140
- ATHR_GMAC: RX TASKLET - Pkts per Intr:32
- mac:1 Registering S27....
- ATHR_GMAC: Max segments per packet : 1
- ATHR_GMAC: Max tx descriptor count : 40
- ATHR_GMAC: Max rx descriptor count : 128
- ATHR_GMAC: Mac capability flags : 2D82
- ATHR_GMAC: RX TASKLET - Pkts per Intr:32
- mac:0 Registering S27....
- ATHR_GMAC: Max segments per packet : 1
- ATHR_GMAC: Max tx descriptor count : 40
- ATHR_GMAC: Max rx descriptor count : 128
- ATHR_GMAC: Mac capability flags : 2582
- athr_gmac_ring_alloc Allocated 640 at 0x81f1b800
- athr_gmac_ring_alloc Allocated 2048 at 0x81ccb000
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- Setting PHY...
- athr_gmac_ring_alloc Allocated 640 at 0x81f1b400
- athr_gmac_ring_alloc Allocated 2048 at 0x81eaf800
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- ATHRS27: resetting s27
- ATHRS27: s27 reset done
- ++++ athrs27_igmp_setup once
- port0 vid is 0xb000b
- port1 vid is 0x30003
- port2 vid is 0x50005
- port3 vid is 0x70007
- port4 vid is 0x90009
- ++ PVID: 0x0000000b, bitmap: 0x0000001f
- ++ PVID: 0x00000003, bitmap: 0x0000001f
- ++ PVID: 0x00000005, bitmap: 0x0000001f
- ++ PVID: 0x00000007, bitmap: 0x0000001f
- ++ PVID: 0x00000009, bitmap: 0x0000001f
- vtable vid: 0x00000002, bitmap 0x00000003
- vtable vid: 0x00000004, bitmap 0x00000005
- vtable vid: 0x00000006, bitmap 0x00000007
- vtable vid: 0x00000008, bitmap 0x00000009
- vtable vid: 0x0000000a, bitmap 0x0000000b
- vtable vid: 0x0000000c, bitmap 0x0000000d
- vtable vid: 0x0000000e, bitmap 0x0000000f
- vtable vid: 0x00000010, bitmap 0x00000011
- vtable vid: 0x00000012, bitmap 0x00000013
- vtable vid: 0x00000014, bitmap 0x00000015
- vtable vid: 0x00000016, bitmap 0x00000017
- vtable vid: 0x00000018, bitmap 0x00000019
- vtable vid: 0x0000001a, bitmap 0x0000001b
- vtable vid: 0x0000001c, bitmap 0x0000001d
- vtable vid: 0x0000001e, bitmap 0x0000001f
- vtable vid: 0x00000020, bitmap 0x00000021
- Setting PHY...
- device eth0 entered promiscuous mode
- athr_gmac_ring_free Freeing at 0x81f1b800
- athr_gmac_ring_free Freeing at 0x81ccb000
- athr_gmac_ring_alloc Allocated 640 at 0x81f1b800
- athr_gmac_ring_alloc Allocated 2048 at 0x81e77800
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- Setting PHY...
- Now flash open!
- athr_gmac_ring_free Freeing at 0x81f1b400
- athr_gmac_ring_free Freeing at 0x81eaf800
- athr_gmac_ring_alloc Allocated 640 at 0x81f1b400
- athr_gmac_ring_alloc Allocated 2048 at 0x81eaf000
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- Setting PHY...
- ====>>>>DHCP start.dhcpc.c,dhcpcStart,712
- ====>>>>DHCP end.dhcpc.c,dhcpcStart,772
- nf_conntrack_rtsp v0.6.21 loading
- nf_nat_rtsp v0.6.21 loading
- asf: module license 'Proprietary' taints kernel.
- Disabling lock debugging due to kernel taint
- ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, 11D)
- ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
- ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
- ath_ahb: 9.2.0_U10.1020 (Atheros/multi-bss)
- __ath_attach: Set global_scn[0]
- ACBKMinfree = 48
- ACBEMinfree = 32
- ACVIMinfree = 16
- ACVOMinfree = 0
- CABMinfree = 48
- UAPSDMinfree = 0
- Restoring Cal data from Flash
- ath_get_caps[5105] rx chainmask mismatch actual 3 sc_chainmak 0
- ath_get_caps[5080] tx chainmask mismatch actual 3 sc_chainmak 0
- wifi0: Atheros 9340: mem=0xb8100000, irq=2
- ====>>>>SystemMode : Normal Router
- wlan_vap_create : enter. devhandle=0x80c882c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
- wlan_vap_create : exit. devhandle=0x80c882c0, opmode=IEEE80211_M_HOSTAP, flags=0x1.
- VAP device ath0 created
- ====>>>>wlan: rand channel 7
- DES SSID SET=TP-LINK_9767DA
- ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
- Free buffer count 256
- athr_gmac_ring_free Freeing at 0x81f1b400
- athr_gmac_ring_free Freeing at 0x81eaf000
- br0: port 1(eth0) entering disabled state
- athr_gmac_ring_alloc Allocated 640 at 0x81f1b400
- athr_gmac_ring_alloc Allocated 2048 at 0x81f7f800
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- Setting PHY...
- Free buffer count 256
- device ath0 entered promiscuous mode
- br0: port 2(ath0) entering forwarding state
- ieee80211_ioctl_siwmode: imr.ifm_active=1442432, new mode=3, valid=1
- br0: port 2(ath0) entering disabled state
- DES SSID SET=TP-LINK_9767DA
- Free buffer count 256
- br0: port 2(ath0) entering forwarding state
- ====>>>>cmdCtrl open success
- ====>>>>eventCtrl open success
- ====>>>>eventCtrl attach success
- ATHR_GMAC: GE0 RX DMA ENABLE
- enet1 port1 up
- ATHR_GMAC: Enet Unit:1 PHY:1 is UP RGMii 100Mbps full duplex
- ATHR_GMAC: done cfg2 0x7215 ifctl 0x0 miictrl
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- enet1 port1 down
- ATHR_GMAC:unit 1: phy 1 not up carrier 1
- enet1 port1 up
- ATHR_GMAC: Enet Unit:1 PHY:1 is UP RGMii 100Mbps full duplex
- ATHR_GMAC: done cfg2 0x7215 ifctl 0x0 miictrl
- WASP ----> S27 PHY MDIO
- Setting Drop CRC Errors, Pause Frames and Length Error frames
- br0: port 1(eth0) entering forwarding state
- Now flash open!
- Erase from 0X20000 to 0X3E0000:............................................................
- Program from 0X20000 to 0X3E0000:............................................................
- write successfully
- reboot...
- Restarting system.
- U-Boot 1.1.4 (Jun 20 2013 - 17:34:51)
- U-boot AP123
- DRAM: 32 MB
- id read 0x100000ff
- Flash: 4 MB
- Using default environment
- In: serial
- Out: serial
- Err: serial
- Net: ag934x_enet_initialize...
- wasp reset mask:c03300
- WASP ----> S27 PHY
- file: ag934x.c,line: 179==: set LAN&WAN SWAP. --debug by HouXB
- GMAC: cfg1 0x5 cfg2 0x7114
- eth0: ba:be:fa:ce:08:41
- s27 reg init
- athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
- athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
- eth0 up
- WASP ----> S27 PHY
- file: ag934x.c,line: 179==: set LAN&WAN SWAP. --debug by HouXB
- GMAC: cfg1 0xf cfg2 0x7214
- eth1: ba:be:fa:ce:08:41
- s27 reg init lan
- ATHRS27: resetting s27
- ATHRS27: s27 reset done
- athrs27_phy_setup ATHR_PHY_CONTROL 0: 0x1000
- athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0: 0x10
- athrs27_phy_setup ATHR_PHY_CONTROL 1: 0x1000
- athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1: 0x50
- athrs27_phy_setup ATHR_PHY_CONTROL 2: 0x1000
- athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2: 0x10
- athrs27_phy_setup ATHR_PHY_CONTROL 3: 0x1000
- athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3: 0x10
- eth1 up
- eth0, eth1
- Autobooting in 1 seconds
- ## Booting image at 9f020000 ...
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Linux version 3.10.4 (ric@ubuntu-wks) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37417) ) #41 Sun Aug 11 21:38:35 CEST 2013
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU revision is: 0001974c (MIPS 74Kc)
- [ 0.000000] SoC: Atheros AR9341 rev 3
- [ 0.000000] Clocks: CPU:535.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 02000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
- [ 0.000000] Kernel command line: board=TL-WR841N-v8 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
- [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
- [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Writing ErrCtl register=00000000
- [ 0.000000] Readback ErrCtl register=00000000
- [ 0.000000] Memory: 28784k/32768k available (2208k kernel code, 3984k reserved, 592k data, 268k init, 0k highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:51
- [ 0.000000] Calibrating delay loop... 266.64 BogoMIPS (lpj=1333248)
- [ 0.080000] pid_max: default: 32768 minimum: 301
- [ 0.080000] Mount-cache hash table entries: 512
- [ 0.090000] NET: Registered protocol family 16
- [ 0.090000] MIPS: machine is TP-LINK TL-WR841N/ND v8
- [ 0.510000] bio: create slab <bio-0> at 0
- [ 0.510000] Switching to clocksource MIPS
- [ 0.520000] NET: Registered protocol family 2
- [ 0.520000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- [ 0.530000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.540000] TCP: Hash tables configured (established 512 bind 512)
- [ 0.540000] TCP: reno registered
- [ 0.540000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.550000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.560000] NET: Registered protocol family 1
- [ 0.580000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.580000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.590000] msgmni has been set to 56
- [ 0.600000] io scheduler noop registered
- [ 0.600000] io scheduler deadline registered (default)
- [ 0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- «‚rІљ‚‚‚‚кЃserial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
- [ 0.640000] console [ttyS0] enabled, bootconsole disabled
- [ 0.640000] console [ttyS0] enabled, bootconsole disabled
- [ 0.650000] ath79-spi ath79-spi: master is unqueued, this is deprecated
- [ 0.660000] m25p80 spi0.0: found s25sl032p, expected m25p80
- [ 0.670000] m25p80 spi0.0: s25sl032p (4096 Kbytes)
- [ 0.670000] 5 tp-link partitions found on MTD device spi0.0
- [ 0.680000] Creating 5 MTD partitions on "spi0.0":
- [ 0.680000] 0x000000000000-0x000000020000 : "u-boot"
- [ 0.690000] 0x000000020000-0x000000119b70 : "kernel"
- [ 0.700000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.710000] 0x000000119b70-0x0000003f0000 : "rootfs"
- [ 0.720000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
- [ 0.730000] mtd: partition "rootfs" set to be root filesystem
- [ 0.740000] mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0xa0000
- [ 0.740000] 0x000000350000-0x0000003f0000 : "rootfs_data"
- [ 0.750000] 0x0000003f0000-0x000000400000 : "art"
- [ 0.760000] 0x000000020000-0x0000003f0000 : "firmware"
- [ 0.780000] libphy: ag71xx_mdio: probed
- [ 0.790000] eth0: Atheros A
- [ 1.360000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
- [ 1.910000] eth1: Found an AR934X built-in switch
- [ 2.950000] TCP: cubic registered
- [ 2.950000] NET: Registered protocol family 17
- [ 2.960000] 8021q: 802.1Q VLAN Support v1.8
- [ 2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
- [ 2.980000] Freeing unused kernel memory: 268K (8031d000 - 80360000)
- procd: Console is alive
- procd: - watchdog -
- procd: - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- mount_root: jffs2 is not ready - marker found
- procd: - early -
- procd: - watchdog -
- procd: - init -
- Please press Enter to activate this console.
- [ 10.030000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
- [ 10.040000] Backport generated by backports.git backports-20130617-4-ge3220f5
- [ 10.190000] cfg80211: Calling CRDA to update world regulatory domain
- [ 10.190000] cfg80211: World regulatory domain updated:
- [ 10.200000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 10.210000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.210000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.220000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 10.230000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 10.540000] NET: Registered protocol family 10
- [ 11.240000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
- [ 11.340000] cfg80211: Calling CRDA for country: US
- [ 11.340000] cfg80211: Regulatory domain changed to country: US
- [ 11.350000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 11.360000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
- [ 11.360000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
- [ 11.370000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 11.380000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 11.390000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 11.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
- [ 11.430000] PPP generic driver version 2.4.2
- [ 11.540000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.570000] xt_time: kernel timezone is -0000
- [ 11.590000] NET: Registered protocol family 24
- [ 11.610000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
- [ 11.740000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.910000] u32 classifier
- [ 11.910000] input device check on
- [ 11.920000] Actions configured
- [ 12.000000] Mirror/redirect action on
- [ 17.880000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 17.880000] device eth1 entered promiscuous mode
- [ 17.890000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 17.900000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 18.530000] eth1: link up (1000Mbps/Full duplex)
- [ 18.530000] br-lan: port 1(eth1) entered forwarding state
- [ 18.540000] br-lan: port 1(eth1) entered forwarding state
- [ 18.540000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 18.550000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 20.540000] br-lan: port 1(eth1) entered forwarding state
- [ 32.010000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
- [ 32.030000] jffs2_build_filesystem(): unlocking the mtd device... done.
- [ 32.030000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
- [ 34.910000] jffs2: notice: (1151) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- procd: - init complete -
- BusyBox v1.19.4 (2013-08-04 14:58:49 CEST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- BARRIER BREAKER (Bleeding Edge, r37754)
- -----------------------------------------------------
- * 1/2 oz Galliano Pour all ingredients into
- * 4 oz cold Coffee an irish coffee mug filled
- * 1 1/2 oz Dark Rum with crushed ice. Stir.
- * 2 tsp. Creme de Cacao
- -----------------------------------------------------
- root@OpenWrt:/# ps
- PID USER VSZ STAT COMMAND
- 1 root 1364 S /sbin/procd
- 2 root 0 SW [kthreadd]
- 3 root 0 SW [ksoftirqd/0]
- 4 root 0 SW [kworker/0:0]
- 5 root 0 SW< [kworker/0:0H]
- 6 root 0 SW [kworker/u2:0]
- 7 root 0 SW< [khelper]
- 8 root 0 SW [kworker/u2:1]
- 58 root 0 SW< [writeback]
- 60 root 0 SW< [bioset]
- 62 root 0 SW< [kblockd]
- 87 root 0 SW [kworker/0:1]
- 92 root 0 SW [kswapd0]
- 137 root 0 SW [fsnotify_mark]
- 151 root 0 SW< [ath79-spi]
- 229 root 0 SW< [deferwq]
- 232 root 0 SW [kworker/0:2]
- 427 root 880 S < ubusd
- 428 root 1504 S /bin/ash --login
- 462 root 0 SW< [cfg80211]
- 796 root 1488 S /sbin/netifd
- 853 root 1500 S udhcpc -p /var/run/udhcpc-eth0.pid -s /lib/netifd/dh
- 890 root 816 S /usr/sbin/6relayd -l/tmp/hosts/6relayd /usr/sbin/6re
- 1096 root 1492 S /usr/sbin/telnetd -F -l /bin/login.sh
- 1103 root 1584 S /usr/sbin/uhttpd -f -h /www -r OpenWrt -x /cgi-bin -
- 1142 nobody 960 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf
- 1153 root 0 SWN [jffs2_gcd_mtd3]
- 1179 root 1500 S /usr/sbin/ntpd -n -p 0.openwrt.pool.ntp.org -p 1.ope
- 1194 root 1156 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
- 1201 root 1496 R ps
- root@OpenWrt:/# ip a
- /bin/ash: ip: not found
- root@OpenWrt:/# ifconfig
- br-lan Link encap:Ethernet HWaddr F8:1A:67:97:67:DA
- inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
- inet6 addr: fdd6:37d4:4001::1/60 Scope:Global
- inet6 addr: fe80::fa1a:67ff:fe97:67da/64 Scope:Link
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:198 errors:0 dropped:0 overruns:0 frame:0
- TX packets:184 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:15408 (15.0 KiB) TX bytes:77286 (75.4 KiB)
- eth0 Link encap:Ethernet HWaddr F8:1A:67:97:67:D9
- UP BROADCAST MULTICAST MTU:1500 Metric:1
- RX packets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
- Interrupt:4
- eth1 Link encap:Ethernet HWaddr F8:1A:67:97:67:DA
- UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- RX packets:198 errors:0 dropped:0 overruns:0 frame:0
- TX packets:184 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:1000
- RX bytes:18180 (17.7 KiB) TX bytes:77286 (75.4 KiB)
- Interrupt:5
- lo Link encap:Local Loopback
- inet addr:127.0.0.1 Mask:255.0.0.0
- inet6 addr: ::1/128 Scope:Host
- UP LOOPBACK RUNNING MTU:65536 Metric:1
- RX packets:960 errors:0 dropped:0 overruns:0 frame:0
- TX packets:960 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:0
- RX bytes:65280 (63.7 KiB) TX bytes:65280 (63.7 KiB)
- root@OpenWrt:/# net[J
- netifd netmsg netstat
- root@OpenWrt:/# netstat [J-apnt
- Active Internet connections (servers and established)
- Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
- tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1103/uhttpd
- tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 1142/dnsmasq
- tcp 0 0 0.0.0.0:8022 0.0.0.0:* LISTEN 1248/dropbear
- tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1103/uhttpd
- tcp 0 0 192.168.1.1:80 192.168.1.100:2601 FIN_WAIT2 -
- tcp 0 0 192.168.1.1:80 192.168.1.100:2599 FIN_WAIT2 -
- tcp 0 0 192.168.1.1:80 192.168.1.100:2600 FIN_WAIT2 -
- tcp 0 0 192.168.1.1:80 192.168.1.100:2603 TIME_WAIT -
- tcp 0 0 192.168.1.1:80 192.168.1.100:2604 TIME_WAIT -
- tcp 0 0 192.168.1.1:80 192.168.1.100:2602 TIME_WAIT -
- tcp 0 0 :::53 :::* LISTEN 1142/dnsmasq
- tcp 0 0 :::8022 :::* LISTEN 1248/dropbear
- tcp 0 0 :::23 :::* LISTEN 1096/telnetd
- root@OpenWrt:/# mount
- rootfs on / type rootfs (rw)
- /dev/root on /rom type squashfs (ro,relatime)
- proc on /proc type proc (rw,noatime)
- sysfs on /sys type sysfs (rw,noatime)
- tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
- tmpfs on /tmp/root type tmpfs (rw,noatime,mode=755)
- tmpfs on /dev type tmpfs (rw,relatime,size=512k,mode=755)
- devpts on /dev/pts type devpts (rw,relatime,mode=600)
- debugfs on /sys/kernel/debug type debugfs (rw,noatime)
- /dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
- overlayfs:/overlay on / type overlayfs (rw,noatime,lowerdir=/,upperdir=/overlay)
- root@OpenWrt:/# halt
- procd: - shutdown -
- root@OpenWrt:/# [ 505.720000] br-lan: port 1(eth1) entered disabled state
- [ 505.740000] device eth1 left promiscuous mode
- [ 505.740000] br-lan: port 1(eth1) entered disabled state
- [ 505.760000] eth1: link down
- procd: - reboot -
- [ 506.530000] Removing MTD device #3 (rootfs_data) with use count 1
- [ 506.550000] Power down.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement