API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 5th, 2011
136
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 54.39 KB | None | 0 0
raw download clone embed print report
  1. dad@90e6ba974a82:~$ cat suspendresume
  2. [ 0.000000] ACPI: FACS 5ffb0000 00040
  3. [ 0.000000] ACPI: APIC 5ffa0390 00080 (v01 060909 APIC2004 20090609 MSFT 00000097)
  4. [ 0.000000] ACPI: MCFG 5ffa0410 0003C (v01 060909 OEMMCFG 20090609 MSFT 00000097)
  5. [ 0.000000] ACPI: OEMB 5ffb0040 00078 (v01 060909 OEMB2004 20090609 MSFT 00000097)
  6. [ 0.000000] ACPI: AAFT 5ffaa450 00027 (v01 060909 OEMAAFT 20090609 MSFT 00000097)
  7. [ 0.000000] ACPI: NVHD 5ffb00c0 00284 (v01 060909 NVHDCP 20090609 MSFT 00000097)
  8. [ 0.000000] ACPI: Local APIC address 0xfee00000
  9. [ 0.000000] 647MB HIGHMEM available.
  10. [ 0.000000] 887MB LOWMEM available.
  11. [ 0.000000] mapped low ram: 0 - 377fe000
  12. [ 0.000000] low ram: 0 - 377fe000
  13. [ 0.000000] node 0 low ram: 00000000 - 377fe000
  14. [ 0.000000] node 0 bootmap 00011000 - 00017f00
  15. [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  16. [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  17. [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  18. [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
  19. [ 0.000000] #3 [0000100000 - 00008deef8] TEXT DATA BSS ==> [0000100000 - 00008deef8]
  20. [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
  21. [ 0.000000] #5 [00008df000 - 00008e216b] BRK ==> [00008df000 - 00008e216b]
  22. [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
  23. [ 0.000000] #7 [00008e3000 - 000117a811] NEW RAMDISK ==> [00008e3000 - 000117a811]
  24. [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
  25. [ 0.000000] found SMP MP-table at [c00ff780] ff780
  26. [ 0.000000] Zone PFN ranges:
  27. [ 0.000000] DMA 0x00000010 -> 0x00001000
  28. [ 0.000000] Normal 0x00001000 -> 0x000377fe
  29. [ 0.000000] HighMem 0x000377fe -> 0x0005ffa0
  30. [ 0.000000] Movable zone start PFN for each node
  31. [ 0.000000] early_node_map[2] active PFN ranges
  32. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  33. [ 0.000000] 0: 0x00000100 -> 0x0005ffa0
  34. [ 0.000000] On node 0 totalpages: 393007
  35. [ 0.000000] free_area_init_node: node 0, pgdat c07987c0, node_mem_map c117c200
  36. [ 0.000000] DMA zone: 32 pages used for memmap
  37. [ 0.000000] DMA zone: 0 pages reserved
  38. [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
  39. [ 0.000000] Normal zone: 1744 pages used for memmap
  40. [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
  41. [ 0.000000] HighMem zone: 1296 pages used for memmap
  42. [ 0.000000] HighMem zone: 164498 pages, LIFO batch:31
  43. [ 0.000000] Using APIC driver default
  44. [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
  45. [ 0.000000] If you got timer trouble try acpi_use_timer_override
  46. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
  47. [ 0.000000] ACPI: Local APIC address 0xfee00000
  48. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  49. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  50. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
  51. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  52. [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
  53. [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
  54. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  55. [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
  56. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  57. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
  58. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
  59. [ 0.000000] ACPI: IRQ9 used by override.
  60. [ 0.000000] ACPI: IRQ14 used by override.
  61. [ 0.000000] ACPI: IRQ15 used by override.
  62. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  63. [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
  64. [ 0.000000] nr_irqs_gsi: 24
  65. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  66. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  67. [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  68. [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
  69. [ 0.000000] Booting paravirtualized kernel on bare hardware
  70. [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  71. [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36312 r0 d21032 u1048576
  72. [ 0.000000] pcpu-alloc: s36312 r0 d21032 u1048576 alloc=1*4194304
  73. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  74. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389935
  75. [ 0.000000] Kernel command line: ro initrd=initrd.img quiet splash nbdport=2000 BOOT_IMAGE=vmlinuz
  76. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  77. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  78. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  79. [ 0.000000] Enabling fast FPU save and restore... done.
  80. [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
  81. [ 0.000000] Initializing CPU#0
  82. [ 0.000000] allocated 7862080 bytes of page_cgroup
  83. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  84. [ 0.000000] Initializing HighMem for node 0 (000377fe:0005ffa0)
  85. [ 0.000000] Memory: 1532972k/1572480k available (4674k kernel code, 37916k reserved, 2120k data, 668k init, 663176k highmem)
  86. [ 0.000000] virtual kernel memory layout:
  87. [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
  88. [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  89. [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  90. [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  91. [ 0.000000] .init : 0xc07a3000 - 0xc084a000 ( 668 kB)
  92. [ 0.000000] .data : 0xc0590ad7 - 0xc07a2d88 (2120 kB)
  93. [ 0.000000] .text : 0xc0100000 - 0xc0590ad7 (4674 kB)
  94. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  95. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  96. [ 0.000000] Hierarchical RCU implementation.
  97. [ 0.000000] NR_IRQS:2304 nr_irqs:440
  98. [ 0.000000] spurious 8259A interrupt: IRQ7.
  99. [ 0.000000] Console: colour VGA+ 80x25
  100. [ 0.000000] console [tty0] enabled
  101. [ 0.000000] Fast TSC calibration using PIT
  102. [ 0.000000] Detected 1599.706 MHz processor.
  103. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.41 BogoMIPS (lpj=6398824)
  104. [ 0.004050] Security Framework initialized
  105. [ 0.004097] AppArmor: AppArmor initialized
  106. [ 0.004115] Mount-cache hash table entries: 512
  107. [ 0.004377] Initializing cgroup subsys ns
  108. [ 0.004387] Initializing cgroup subsys cpuacct
  109. [ 0.004398] Initializing cgroup subsys memory
  110. [ 0.004413] Initializing cgroup subsys devices
  111. [ 0.004419] Initializing cgroup subsys freezer
  112. [ 0.004425] Initializing cgroup subsys net_cls
  113. [ 0.004467] CPU: L1 I cache: 32K, L1 D cache: 24K
  114. [ 0.004475] CPU: L2 cache: 512K
  115. [ 0.004480] CPU: Physical Processor ID: 0
  116. [ 0.004485] CPU: Processor Core ID: 0
  117. [ 0.004493] mce: CPU supports 5 MCE banks
  118. [ 0.004509] CPU0: Thermal monitoring enabled (TM1)
  119. [ 0.004519] using mwait in idle threads.
  120. [ 0.004531] Performance Events: Atom events, Intel PMU driver.
  121. [ 0.004549] ... version: 3
  122. [ 0.004554] ... bit width: 40
  123. [ 0.004558] ... generic registers: 2
  124. [ 0.004564] ... value mask: 000000ffffffffff
  125. [ 0.004569] ... max period: 000000007fffffff
  126. [ 0.004574] ... fixed-purpose events: 3
  127. [ 0.004579] ... event mask: 0000000700000003
  128. [ 0.004588] Checking 'hlt' instruction... OK.
  129. [ 0.020011] Disabling 4MB page tables to avoid TLB bug
  130. [ 0.024325] ACPI: Core revision 20090903
  131. [ 0.043154] ftrace: converting mcount calls to 0f 1f 44 00 00
  132. [ 0.043166] ftrace: allocating 21723 entries in 43 pages
  133. [ 0.044135] Enabling APIC mode: Flat. Using 1 I/O APICs
  134. [ 0.044561] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  135. [ 0.087821] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  136. [ 0.088001] Booting processor 1 APIC 0x2 ip 0x6000
  137. [ 0.008000] Initializing CPU#1
  138. [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
  139. [ 0.008000] CPU: L2 cache: 512K
  140. [ 0.008000] CPU: Physical Processor ID: 0
  141. [ 0.008000] CPU: Processor Core ID: 1
  142. [ 0.008000] CPU1: Thermal monitoring enabled (TM1)
  143. [ 0.172077] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  144. [ 0.172097] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  145. [ 0.176221] Booting processor 2 APIC 0x1 ip 0x6000
  146. [ 0.008000] Initializing CPU#2
  147. [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
  148. [ 0.008000] CPU: L2 cache: 512K
  149. [ 0.008000] CPU: Physical Processor ID: 0
  150. [ 0.008000] CPU: Processor Core ID: 0
  151. [ 0.008000] CPU2: Thermal monitoring enabled (TM1)
  152. [ 0.264114] CPU2: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  153. [ 0.264134] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
  154. [ 0.268253] Booting processor 3 APIC 0x3 ip 0x6000
  155. [ 0.008000] Initializing CPU#3
  156. [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
  157. [ 0.008000] CPU: L2 cache: 512K
  158. [ 0.008000] CPU: Physical Processor ID: 0
  159. [ 0.008000] CPU: Processor Core ID: 1
  160. [ 0.008000] CPU3: Thermal monitoring enabled (TM1)
  161. [ 0.356077] CPU3: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  162. [ 0.356096] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
  163. [ 0.360030] Brought up 4 CPUs
  164. [ 0.360036] Total of 4 processors activated (12800.24 BogoMIPS).
  165. [ 0.362177] CPU0 attaching sched-domain:
  166. [ 0.362188] domain 0: span 0,2 level SIBLING
  167. [ 0.362194] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  168. [ 0.362206] domain 1: span 0,2 level MC
  169. [ 0.362212] groups: 0,2 (cpu_power = 1178)
  170. [ 0.362221] domain 2: span 0-3 level CPU
  171. [ 0.362227] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  172. [ 0.362245] CPU1 attaching sched-domain:
  173. [ 0.362250] domain 0: span 1,3 level SIBLING
  174. [ 0.362255] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
  175. [ 0.362267] domain 1: span 1,3 level MC
  176. [ 0.362272] groups: 1,3 (cpu_power = 1178)
  177. [ 0.362281] domain 2: span 0-3 level CPU
  178. [ 0.362286] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  179. [ 0.362300] CPU2 attaching sched-domain:
  180. [ 0.362305] domain 0: span 0,2 level SIBLING
  181. [ 0.362310] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  182. [ 0.362322] domain 1: span 0,2 level MC
  183. [ 0.362327] groups: 0,2 (cpu_power = 1178)
  184. [ 0.362336] domain 2: span 0-3 level CPU
  185. [ 0.362341] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  186. [ 0.362355] CPU3 attaching sched-domain:
  187. [ 0.362360] domain 0: span 1,3 level SIBLING
  188. [ 0.362365] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
  189. [ 0.362377] domain 1: span 1,3 level MC
  190. [ 0.362382] groups: 1,3 (cpu_power = 1178)
  191. [ 0.362391] domain 2: span 0-3 level CPU
  192. [ 0.362396] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  193. [ 0.362786] devtmpfs: initialized
  194. [ 0.364062] regulator: core version 0.5
  195. [ 0.364123] Time: 17:19:47 Date: 07/05/11
  196. [ 0.364220] NET: Registered protocol family 16
  197. [ 0.364245] Trying to unpack rootfs image as initramfs...
  198. [ 0.364525] EISA bus registered
  199. [ 0.364549] ACPI: bus type pci registered
  200. [ 0.364697] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
  201. [ 0.364704] PCI: Not using MMCONFIG.
  202. [ 0.364965] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
  203. [ 0.364970] PCI: Using configuration type 1 for base access
  204. [ 0.366976] bio: create slab <bio-0> at 0
  205. [ 0.369857] ACPI: EC: Look up EC in DSDT
  206. [ 0.379725] ACPI: Executed 1 blocks of module-level executable AML code
  207. [ 0.392030] ACPI: Interpreter enabled
  208. [ 0.392039] ACPI: (supports S0 S1 S3 S4 S5)
  209. [ 0.392097] ACPI: Using IOAPIC for interrupt routing
  210. [ 0.392215] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31
  211. [ 0.401916] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources
  212. [ 0.401923] PCI: Using MMCONFIG for extended config space
  213. [ 0.429791] ACPI: No dock devices found.
  214. [ 0.430748] ACPI: PCI Root Bridge [PCI0] (0000:00)
  215. [ 0.431087] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff]
  216. [ 0.431224] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f]
  217. [ 0.431245] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f]
  218. [ 0.431255] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f]
  219. [ 0.431289] pci 0000:00:03.2: PME# supported from D3hot D3cold
  220. [ 0.431298] pci 0000:00:03.2: PME# disabled
  221. [ 0.431454] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff]
  222. [ 0.431567] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff]
  223. [ 0.431611] pci 0000:00:04.0: supports D1 D2
  224. [ 0.431616] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
  225. [ 0.431624] pci 0000:00:04.0: PME# disabled
  226. [ 0.431669] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff]
  227. [ 0.431723] pci 0000:00:04.1: supports D1 D2
  228. [ 0.431728] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
  229. [ 0.431735] pci 0000:00:04.1: PME# disabled
  230. [ 0.431787] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff]
  231. [ 0.431832] pci 0000:00:08.0: PME# supported from D3hot D3cold
  232. [ 0.431841] pci 0000:00:08.0: PME# disabled
  233. [ 0.431942] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff]
  234. [ 0.431952] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087]
  235. [ 0.431962] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e800-0xfae7e8ff]
  236. [ 0.431973] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e400-0xfae7e40f]
  237. [ 0.432023] pci 0000:00:0a.0: supports D1 D2
  238. [ 0.432028] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
  239. [ 0.432037] pci 0000:00:0a.0: PME# disabled
  240. [ 0.432083] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007]
  241. [ 0.432093] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03]
  242. [ 0.432102] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887]
  243. [ 0.432112] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803]
  244. [ 0.432121] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f]
  245. [ 0.432131] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae72000-0xfae73fff]
  246. [ 0.432236] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
  247. [ 0.432243] pci 0000:00:10.0: PME# disabled
  248. [ 0.432338] pci 0000:00:09.0: transparent bridge
  249. [ 0.432392] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
  250. [ 0.432408] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
  251. [ 0.432423] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xf8000000-0xf9ffffff]
  252. [ 0.432434] pci 0000:01:00.0: reg 24 io port: [0xec00-0xec7f]
  253. [ 0.432445] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff]
  254. [ 0.432517] pci 0000:00:10.0: bridge io port: [0xe000-0xefff]
  255. [ 0.432525] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff]
  256. [ 0.432534] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff]
  257. [ 0.432550] pci_bus 0000:00: on NUMA node 0
  258. [ 0.432563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  259. [ 0.432963] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
  260. [ 0.449971] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
  261. [ 0.450521] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
  262. [ 0.451066] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
  263. [ 0.451614] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
  264. [ 0.452185] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
  265. [ 0.452731] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
  266. [ 0.453284] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
  267. [ 0.453836] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
  268. [ 0.454376] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
  269. [ 0.454917] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
  270. [ 0.455457] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
  271. [ 0.456020] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
  272. [ 0.456563] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
  273. [ 0.457108] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
  274. [ 0.457651] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
  275. [ 0.458192] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
  276. [ 0.458732] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
  277. [ 0.459273] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
  278. [ 0.459813] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
  279. [ 0.460379] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
  280. [ 0.460922] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
  281. [ 0.461465] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
  282. [ 0.462010] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
  283. [ 0.462556] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
  284. [ 0.463098] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
  285. [ 0.463642] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
  286. [ 0.464214] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
  287. [ 0.464762] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
  288. [ 0.465308] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
  289. [ 0.465854] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
  290. [ 0.466400] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
  291. [ 0.466948] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
  292. [ 0.467503] ACPI: PCI Interrupt Link [LUB0] (IRQs 16) *15
  293. [ 0.468077] ACPI: PCI Interrupt Link [LUB2] (IRQs 18) *14
  294. [ 0.468632] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
  295. [ 0.469184] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7
  296. [ 0.469739] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
  297. [ 0.470295] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
  298. [ 0.470856] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *9
  299. [ 0.471410] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
  300. [ 0.472059] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
  301. [ 0.472604] ACPI: PCI Interrupt Link [UB11] (IRQs 17) *0, disabled.
  302. [ 0.473144] ACPI: PCI Interrupt Link [UB12] (IRQs 19) *0, disabled.
  303. [ 0.473685] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled.
  304. [ 0.474235] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
  305. [ 0.474786] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
  306. [ 0.475338] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *0, disabled.
  307. [ 0.475898] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *0, disabled.
  308. [ 0.476463] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled.
  309. [ 0.477022] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled.
  310. [ 0.477322] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  311. [ 0.477330] vgaarb: loaded
  312. [ 0.477605] SCSI subsystem initialized
  313. [ 0.477646] libata version 3.00 loaded.
  314. [ 0.477646] usbcore: registered new interface driver usbfs
  315. [ 0.477646] usbcore: registered new interface driver hub
  316. [ 0.477646] usbcore: registered new device driver usb
  317. [ 0.477646] ACPI: WMI: Mapper loaded
  318. [ 0.477646] PCI: Using ACPI for IRQ routing
  319. [ 0.477646] NetLabel: Initializing
  320. [ 0.477646] NetLabel: domain hash size = 128
  321. [ 0.477646] NetLabel: protocols = UNLABELED CIPSOv4
  322. [ 0.477646] NetLabel: unlabeled traffic allowed by default
  323. [ 0.477646] Switching to clocksource tsc
  324. [ 0.484107] AppArmor: AppArmor Filesystem Enabled
  325. [ 0.484152] pnp: PnP ACPI init
  326. [ 0.484201] ACPI: bus type pnp registered
  327. [ 0.494584] pnp: PnP ACPI: found 9 devices
  328. [ 0.494591] ACPI: ACPI bus type pnp unregistered
  329. [ 0.494599] PnPBIOS: Disabled by ACPI PNP
  330. [ 0.494631] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
  331. [ 0.494638] system 00:04: ioport range 0x800-0x80f has been reserved
  332. [ 0.494645] system 00:04: ioport range 0x4000-0x407f has been reserved
  333. [ 0.494652] system 00:04: ioport range 0x4080-0x40ff has been reserved
  334. [ 0.494660] system 00:04: ioport range 0x4400-0x447f has been reserved
  335. [ 0.494667] system 00:04: ioport range 0x4480-0x44ff has been reserved
  336. [ 0.494674] system 00:04: ioport range 0x4800-0x487f has been reserved
  337. [ 0.494681] system 00:04: ioport range 0x4880-0x48ff has been reserved
  338. [ 0.494690] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved
  339. [ 0.494698] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved
  340. [ 0.494705] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
  341. [ 0.494721] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
  342. [ 0.494729] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
  343. [ 0.494743] system 00:07: iomem range 0xfc000000-0xfdffffff has been reserved
  344. [ 0.494758] system 00:08: iomem range 0x0-0x9ffff could not be reserved
  345. [ 0.494766] system 00:08: iomem range 0xc0000-0xcffff could not be reserved
  346. [ 0.494773] system 00:08: iomem range 0xe0000-0xfffff could not be reserved
  347. [ 0.494780] system 00:08: iomem range 0x100000-0x7fffffff could not be reserved
  348. [ 0.494788] system 00:08: iomem range 0xfec00000-0xffffffff could not be reserved
  349. [ 0.529818] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
  350. [ 0.529824] pci 0000:00:09.0: IO window: disabled
  351. [ 0.529832] pci 0000:00:09.0: MEM window: disabled
  352. [ 0.529838] pci 0000:00:09.0: PREFETCH window: disabled
  353. [ 0.529848] pci 0000:00:10.0: PCI bridge, secondary bus 0000:01
  354. [ 0.529855] pci 0000:00:10.0: IO window: 0xe000-0xefff
  355. [ 0.529863] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff
  356. [ 0.529871] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff
  357. [ 0.529891] pci 0000:00:09.0: setting latency timer to 64
  358. [ 0.529904] pci 0000:00:10.0: setting latency timer to 64
  359. [ 0.529913] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  360. [ 0.529919] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  361. [ 0.529926] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
  362. [ 0.529932] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
  363. [ 0.529939] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
  364. [ 0.529945] pci_bus 0000:01: resource 1 mem: [0xfaf00000-0xfbffffff]
  365. [ 0.529951] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf9ffffff]
  366. [ 0.530030] NET: Registered protocol family 2
  367. [ 0.530260] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  368. [ 0.530960] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  369. [ 0.531929] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  370. [ 0.532435] TCP: Hash tables configured (established 131072 bind 65536)
  371. [ 0.532443] TCP reno registered
  372. [ 0.532687] NET: Registered protocol family 1
  373. [ 0.572070] pci 0000:01:00.0: Boot video device
  374. [ 0.572745] cpufreq-nforce2: No nForce2 chipset.
  375. [ 0.572809] Scanning for low memory corruption every 60 seconds
  376. [ 0.573049] audit: initializing netlink socket (disabled)
  377. [ 0.573074] type=2000 audit(1309886386.571:1): initialized
  378. [ 0.590421] highmem bounce pool size: 64 pages
  379. [ 0.590434] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  380. [ 0.594198] VFS: Disk quotas dquot_6.5.2
  381. [ 0.594338] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  382. [ 0.595759] fuse init (API version 7.13)
  383. [ 0.595999] msgmni has been set to 1701
  384. [ 0.596653] alg: No test for stdrng (krng)
  385. [ 0.596813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  386. [ 0.596821] io scheduler noop registered
  387. [ 0.596825] io scheduler anticipatory registered
  388. [ 0.596830] io scheduler deadline registered
  389. [ 0.596935] io scheduler cfq registered (default)
  390. [ 0.597169] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  391. [ 0.597224] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  392. [ 0.597468] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  393. [ 0.597477] ACPI: Power Button [PWRB]
  394. [ 0.597617] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  395. [ 0.597624] ACPI: Power Button [PWRF]
  396. [ 0.598408] processor LNXCPU:00: registered as cooling_device0
  397. [ 0.598500] processor LNXCPU:01: registered as cooling_device1
  398. [ 0.598588] processor LNXCPU:02: registered as cooling_device2
  399. [ 0.598682] processor LNXCPU:03: registered as cooling_device3
  400. [ 0.609128] isapnp: Scanning for PnP cards...
  401. [ 0.612745] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  402. [ 0.615791] brd: module loaded
  403. [ 0.617067] loop: module loaded
  404. [ 0.617297] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  405. [ 0.618436] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
  406. [ 0.618447] alloc irq_desc for 23 on node -1
  407. [ 0.618453] alloc kstat_irqs on node -1
  408. [ 0.618469] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
  409. [ 0.618527] pata_acpi 0000:00:0b.0: setting latency timer to 64
  410. [ 0.618551] pata_acpi 0000:00:0b.0: PCI INT A disabled
  411. [ 0.619313] Fixed MDIO Bus: probed
  412. [ 0.619400] PPP generic driver version 2.4.2
  413. [ 0.619513] tun: Universal TUN/TAP device driver, 1.6
  414. [ 0.619519] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  415. [ 0.619743] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  416. [ 0.620611] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 18
  417. [ 0.620621] alloc irq_desc for 18 on node -1
  418. [ 0.620626] alloc kstat_irqs on node -1
  419. [ 0.620640] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 18 (level, low) -> IRQ 18
  420. [ 0.620672] ehci_hcd 0000:00:04.1: setting latency timer to 64
  421. [ 0.620680] ehci_hcd 0000:00:04.1: EHCI Host Controller
  422. [ 0.620780] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
  423. [ 0.620828] ehci_hcd 0000:00:04.1: debug port 1
  424. [ 0.620842] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
  425. [ 0.620874] ehci_hcd 0000:00:04.1: irq 18, io mem 0xfae7ec00
  426. [ 0.632000] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
  427. [ 0.632213] usb usb1: configuration #1 chosen from 1 choice
  428. [ 0.632283] hub 1-0:1.0: USB hub found
  429. [ 0.632302] hub 1-0:1.0: 6 ports detected
  430. [ 0.632433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  431. [ 0.633262] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 16
  432. [ 0.633271] alloc irq_desc for 16 on node -1
  433. [ 0.633276] alloc kstat_irqs on node -1
  434. [ 0.633289] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 16 (level, low) -> IRQ 16
  435. [ 0.633317] ohci_hcd 0000:00:04.0: setting latency timer to 64
  436. [ 0.633324] ohci_hcd 0000:00:04.0: OHCI Host Controller
  437. [ 0.633423] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
  438. [ 0.633466] ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000
  439. [ 0.690217] usb usb2: configuration #1 chosen from 1 choice
  440. [ 0.690311] hub 2-0:1.0: USB hub found
  441. [ 0.690334] hub 2-0:1.0: 6 ports detected
  442. [ 0.690474] uhci_hcd: USB Universal Host Controller Interface driver
  443. [ 0.690685] PNP: No PS/2 controller found. Probing ports directly.
  444. [ 0.692264] serio: i8042 KBD port at 0x60,0x64 irq 1
  445. [ 0.692286] serio: i8042 AUX port at 0x60,0x64 irq 12
  446. [ 0.692533] mice: PS/2 mouse device common for all mice
  447. [ 0.692834] rtc_cmos 00:05: RTC can wake from S4
  448. [ 0.692951] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  449. [ 0.693013] rtc0: alarms up to one year, y3k, 114 bytes nvram
  450. [ 0.693320] device-mapper: uevent: version 1.0.3
  451. [ 0.693744] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  452. [ 0.694167] device-mapper: multipath: version 1.1.0 loaded
  453. [ 0.694177] device-mapper: multipath round-robin: version 1.0.0 loaded
  454. [ 0.694557] EISA: Probing bus 0 at eisa.0
  455. [ 0.694582] Cannot allocate resource for EISA slot 4
  456. [ 0.694605] EISA: Detected 0 cards.
  457. [ 0.695207] cpuidle: using governor ladder
  458. [ 0.695215] cpuidle: using governor menu
  459. [ 0.696450] TCP cubic registered
  460. [ 0.696948] NET: Registered protocol family 10
  461. [ 0.698261] lo: Disabled Privacy Extensions
  462. [ 0.699216] NET: Registered protocol family 17
  463. [ 0.699375] Using IPI No-Shortcut mode
  464. [ 0.699634] PM: Resume from disk failed.
  465. [ 0.699666] registered taskstats version 1
  466. [ 0.700184] Magic number: 3:455:339
  467. [ 0.700391] rtc_cmos 00:05: setting system clock to 2011-07-05 17:19:47 UTC (1309886387)
  468. [ 0.700400] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  469. [ 0.700406] EDD information not available.
  470. [ 0.813676] Freeing initrd memory: 8798k freed
  471. [ 0.962505] isapnp: No Plug & Play device found
  472. [ 0.962541] Freeing unused kernel memory: 668k freed
  473. [ 0.963139] Write protecting the kernel text: 4676k
  474. [ 0.963213] Write protecting the kernel read-only data: 1844k
  475. [ 1.008588] udev: starting version 151
  476. [ 1.161067] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
  477. [ 1.162361] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
  478. [ 1.162381] alloc irq_desc for 22 on node -1
  479. [ 1.162389] alloc kstat_irqs on node -1
  480. [ 1.162412] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
  481. [ 1.162430] forcedeth 0000:00:0a.0: setting latency timer to 64
  482. [ 1.170091] vga16fb: initializing
  483. [ 1.170101] vga16fb: mapped to 0xc00a0000
  484. [ 1.170233] fb0: VGA16 VGA frame buffer device
  485. [ 1.226585] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 90:e6:ba:97:4a:82
  486. [ 1.226594] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
  487. [ 1.372345] usb 2-1: new full speed USB device using ohci_hcd and address 2
  488. [ 1.393491] Console: switching to colour frame buffer device 80x30
  489. [ 1.591397] usb 2-1: configuration #1 chosen from 1 choice
  490. [ 1.630640] usbcore: registered new interface driver hiddev
  491. [ 1.636713] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.0/input/input3
  492. [ 1.637021] generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:04.0-1/input0
  493. [ 1.647629] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.1/input/input4
  494. [ 1.648089] generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:04.0-1/input1
  495. [ 1.676708] input: Microsoft Microsoft® 2.4GHz Transceiver v8.0 as /devices/pci0000:00/0000:00:04.0/usb2/2-1/2-1:1.2/input/input5
  496. [ 1.677149] generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v8.0] on usb-0000:00:04.0-1/input2
  497. [ 1.677270] usbcore: registered new interface driver usbhid
  498. [ 1.677283] usbhid: v2.6:USB HID core driver
  499. [ 1.812126] nbd: registered device at major 43
  500. [ 1.826961] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  501. [ 1.846513] aufs 2-standalone.tree-20091207
  502. [ 1.880054] usb 2-2: new full speed USB device using ohci_hcd and address 3
  503. [ 2.099513] usb 2-2: configuration #1 chosen from 1 choice
  504. [ 2.880718] alloc irq_desc for 24 on node -1
  505. [ 2.880727] alloc kstat_irqs on node -1
  506. [ 2.880747] forcedeth 0000:00:0a.0: irq 24 for MSI/MSI-X
  507. [ 2.880962] eth0: no link during initialization.
  508. [ 2.881655] ADDRCONF(NETDEV_UP): eth0: link is not ready
  509. [ 3.861171] eth0: link up.
  510. [ 3.861530] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  511. [ 5.329787] nbd0: unknown partition table
  512. [ 5.423361] RPC: Registered udp transport module.
  513. [ 5.423368] RPC: Registered tcp transport module.
  514. [ 5.423373] RPC: Registered tcp NFSv4.1 backchannel transport module.
  515. [ 6.125479] udev: starting version 151
  516. [ 6.332368] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
  517. [ 6.332386] ACPI: resource nForce2_smbus [0x4e00-0x4e3f] conflicts with ACPI region SM00 [0x4e00-0x4e3f]
  518. [ 6.332394] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  519. [ 6.332404] nForce2_smbus 0000:00:03.2: Error probing SMB2.
  520. [ 6.373004] Linux agpgart interface v0.103
  521. [ 6.374594] lp: driver loaded but no devices found
  522. [ 6.397486] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  523. [ 6.729647] nvidia: module license 'NVIDIA' taints kernel.
  524. [ 6.729660] Disabling lock debugging due to kernel taint
  525. [ 8.194353] CPU0 attaching NULL sched-domain.
  526. [ 8.194366] CPU1 attaching NULL sched-domain.
  527. [ 8.194372] CPU2 attaching NULL sched-domain.
  528. [ 8.194378] CPU3 attaching NULL sched-domain.
  529. [ 10.702116] ahci 0000:00:0b.0: version 3.0
  530. [ 10.702155] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
  531. [ 10.702245] alloc irq_desc for 25 on node -1
  532. [ 10.702252] alloc kstat_irqs on node -1
  533. [ 10.702269] ahci 0000:00:0b.0: irq 25 for MSI/MSI-X
  534. [ 10.702382] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
  535. [ 10.702391] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part sxs boh
  536. [ 10.702401] ahci 0000:00:0b.0: setting latency timer to 64
  537. [ 10.703506] scsi0 : ahci
  538. [ 10.704234] scsi1 : ahci
  539. [ 10.704702] scsi2 : ahci
  540. [ 10.705338] scsi3 : ahci
  541. [ 10.705863] scsi4 : ahci
  542. [ 10.706309] scsi5 : ahci
  543. [ 10.706925] ata1: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72100 irq 25
  544. [ 10.706937] ata2: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72180 irq 25
  545. [ 10.706946] ata3: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72200 irq 25
  546. [ 10.706956] ata4: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72280 irq 25
  547. [ 10.706965] ata5: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72300 irq 25
  548. [ 10.706974] ata6: SATA max UDMA/133 abar m8192@0xfae72000 port 0xfae72380 irq 25
  549. [ 10.929844] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 21
  550. [ 10.929857] alloc irq_desc for 21 on node -1
  551. [ 10.929863] alloc kstat_irqs on node -1
  552. [ 10.929879] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 21 (level, low) -> IRQ 21
  553. [ 10.931155] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 20
  554. [ 10.931167] alloc irq_desc for 20 on node -1
  555. [ 10.931172] alloc kstat_irqs on node -1
  556. [ 10.931186] nvidia 0000:01:00.0: PCI INT A -> Link[SGRU] -> GSI 20 (level, low) -> IRQ 20
  557. [ 10.931206] nvidia 0000:01:00.0: setting latency timer to 64
  558. [ 10.931216] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  559. [ 10.933003] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.09.07 Wed Jun 8 15:42:20 PDT 2011
  560. [ 10.934894] lirc_dev: IR Remote Control driver registered, major 61
  561. [ 10.935279] CPU0 attaching sched-domain:
  562. [ 10.935291] domain 0: span 0,2 level SIBLING
  563. [ 10.935301] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  564. [ 10.935320] domain 1: span 0,2 level MC
  565. [ 10.935328] groups: 0,2 (cpu_power = 1178)
  566. [ 10.935343] domain 2: span 0-3 level CPU
  567. [ 10.935351] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  568. [ 10.935374] CPU1 attaching sched-domain:
  569. [ 10.935382] domain 0: span 1,3 level SIBLING
  570. [ 10.935390] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
  571. [ 10.935409] domain 1: span 1,3 level MC
  572. [ 10.935417] groups: 1,3 (cpu_power = 1178)
  573. [ 10.935430] domain 2: span 0-3 level CPU
  574. [ 10.935438] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  575. [ 10.935461] CPU2 attaching sched-domain:
  576. [ 10.935469] domain 0: span 0,2 level SIBLING
  577. [ 10.935477] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  578. [ 10.935493] domain 1: span 0,2 level MC
  579. [ 10.935500] groups: 0,2 (cpu_power = 1178)
  580. [ 10.935513] domain 2: span 0-3 level CPU
  581. [ 10.935520] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  582. [ 10.935540] CPU3 attaching sched-domain:
  583. [ 10.935548] domain 0: span 1,3 level SIBLING
  584. [ 10.935556] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
  585. [ 10.935574] domain 1: span 1,3 level MC
  586. [ 10.935582] groups: 1,3 (cpu_power = 1178)
  587. [ 10.935595] domain 2: span 0-3 level CPU
  588. [ 10.935601] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  589. [ 11.024148] ata6: SATA link down (SStatus 0 SControl 300)
  590. [ 11.024211] ata3: SATA link down (SStatus 0 SControl 300)
  591. [ 11.024263] ata4: SATA link down (SStatus 0 SControl 300)
  592. [ 11.032574] ata5: SATA link down (SStatus 0 SControl 300)
  593. [ 11.185581] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  594. [ 11.188257] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  595. [ 11.189155] ata1.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
  596. [ 11.189167] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
  597. [ 11.189241] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, AS02, max UDMA/100
  598. [ 11.190186] ata1.00: configured for UDMA/133
  599. [ 11.190424] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
  600. [ 11.191071] sd 0:0:0:0: Attached scsi generic sg0 type 0
  601. [ 11.191141] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  602. [ 11.191336] sd 0:0:0:0: [sda] Write Protect is off
  603. [ 11.191347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  604. [ 11.191437] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  605. [ 11.192228] ata2.00: configured for UDMA/100
  606. [ 11.193404] sda:
  607. [ 11.195302] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N AS02 PQ: 0 ANSI: 5
  608. [ 11.203404] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  609. [ 11.203415] Uniform CD-ROM driver Revision: 3.20
  610. [ 11.203825] sr 1:0:0:0: Attached scsi CD-ROM sr0
  611. [ 11.204136] sr 1:0:0:0: Attached scsi generic sg1 type 5
  612. [ 13.721965] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
  613. [ 13.774865] sd 0:0:0:0: [sda] Attached SCSI disk
  614. [ 13.787938] lirc_mceusb: Windows Media Center Edition USB IR Transceiver driver for LIRC 1.90
  615. [ 13.787950] lirc_mceusb: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>, Dan Conti <dconti@acm.wwu.edu>
  616. [ 13.916260] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
  617. [ 13.916374] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
  618. [ 13.917462] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
  619. [ 13.917483] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
  620. [ 13.917497] hda_intel: Disable MSI for Nvidia chipset
  621. [ 13.917616] HDA Intel 0000:00:08.0: setting latency timer to 64
  622. [ 13.964154] usb 2-2: reset full speed USB device using ohci_hcd and address 3
  623. [ 14.172924] lirc_dev: lirc_register_driver: sample_rate: 0
  624. [ 14.181926] lirc_mceusb[3]: Microsoft Microsoft IR Transceiver on usb2:3
  625. [ 14.803473] usbcore: registered new interface driver lirc_mceusb
  626. [ 14.844022] eth0: no IPv6 routers present
  627. [ 94.486926] CPU0 attaching NULL sched-domain.
  628. [ 94.486940] CPU1 attaching NULL sched-domain.
  629. [ 94.486946] CPU2 attaching NULL sched-domain.
  630. [ 94.486951] CPU3 attaching NULL sched-domain.
  631. [ 94.516133] CPU0 attaching sched-domain:
  632. [ 94.516142] domain 0: span 0,2 level SIBLING
  633. [ 94.516149] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  634. [ 94.516162] domain 1: span 0,2 level MC
  635. [ 94.516167] groups: 0,2 (cpu_power = 1178)
  636. [ 94.516177] domain 2: span 0-3 level CPU
  637. [ 94.516182] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  638. [ 94.516197] CPU1 attaching sched-domain:
  639. [ 94.516202] domain 0: span 1,3 level SIBLING
  640. [ 94.516208] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
  641. [ 94.516219] domain 1: span 1,3 level MC
  642. [ 94.516224] groups: 1,3 (cpu_power = 1178)
  643. [ 94.516234] domain 2: span 0-3 level CPU
  644. [ 94.516239] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  645. [ 94.516253] CPU2 attaching sched-domain:
  646. [ 94.516258] domain 0: span 0,2 level SIBLING
  647. [ 94.516263] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  648. [ 94.516275] domain 1: span 0,2 level MC
  649. [ 94.516280] groups: 0,2 (cpu_power = 1178)
  650. [ 94.516289] domain 2: span 0-3 level CPU
  651. [ 94.516294] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  652. [ 94.516308] CPU3 attaching sched-domain:
  653. [ 94.516313] domain 0: span 1,3 level SIBLING
  654. [ 94.516318] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
  655. [ 94.516330] domain 1: span 1,3 level MC
  656. [ 94.516335] groups: 1,3 (cpu_power = 1178)
  657. [ 94.516344] domain 2: span 0-3 level CPU
  658. [ 94.516349] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  659. [ 96.434730] PM: Syncing filesystems ... done.
  660. [ 96.435149] PM: Preparing system for mem sleep
  661. [ 96.435156] Freezing user space processes ...
  662. [ 96.435261] nbd (pid 346: nbd-client) got signal 0
  663. [ 96.435271] nbd0: shutting down socket
  664. [ 96.435301] nbd0: Receive control failed (result -4)
  665. [ 96.435530] nbd0: queue cleared
  666. [ 96.490792] (elapsed 0.05 seconds) done.
  667. [ 96.490798] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
  668. [ 96.491136] PM: Entering mem sleep
  669. [ 96.491157] Suspending console(s) (use no_console_suspend to debug)
  670. [ 96.491493] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  671. [ 96.491756] sd 0:0:0:0: [sda] Stopping disk
  672. [ 97.070582] PM: suspend of drv:sd dev:0:0:0:0 complete after 579.088 msecs
  673. [ 97.070616] lirc_mceusb[3]: suspend
  674. [ 97.244047] PM: suspend of drv:ahci dev:0000:00:0b.0 complete after 124.265 msecs
  675. [ 97.245195] forcedeth 0000:00:0a.0: PCI INT A disabled
  676. [ 97.572049] HDA Intel 0000:00:08.0: PCI INT A disabled
  677. [ 97.588468] HDA Intel 0000:00:08.0: power state changed by ACPI to D3
  678. [ 97.588479] PM: suspend of drv:HDA Intel dev:0000:00:08.0 complete after 328.434 msecs
  679. [ 97.588496] ehci_hcd 0000:00:04.1: PCI INT B disabled
  680. [ 97.588509] ohci_hcd 0000:00:04.0: PCI INT A disabled
  681. [ 97.588995] PM: suspend of devices complete after 1097.532 msecs
  682. [ 97.589001] PM: suspend devices took 1.100 seconds
  683. [ 97.620299] PM: late suspend of devices complete after 31.266 msecs
  684. [ 97.620356] ACPI: Preparing to enter system sleep state S3
  685. [ 97.621982] Disabling non-boot CPUs ...
  686. [ 97.622030] CPU0 attaching NULL sched-domain.
  687. [ 97.622038] CPU1 attaching NULL sched-domain.
  688. [ 97.622042] CPU2 attaching NULL sched-domain.
  689. [ 97.622047] CPU3 attaching NULL sched-domain.
  690. [ 97.668036] CPU0 attaching sched-domain:
  691. [ 97.668044] domain 0: span 0,2 level SIBLING
  692. [ 97.668049] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  693. [ 97.668060] domain 1: span 0,2 level MC
  694. [ 97.668065] groups: 0,2 (cpu_power = 1178)
  695. [ 97.668073] domain 2: span 0,2-3 level CPU
  696. [ 97.668078] groups: 0,2 (cpu_power = 1178) 3
  697. [ 97.668088] CPU2 attaching sched-domain:
  698. [ 97.668093] domain 0: span 0,2 level SIBLING
  699. [ 97.668097] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  700. [ 97.668107] domain 1: span 0,2 level MC
  701. [ 97.668112] groups: 0,2 (cpu_power = 1178)
  702. [ 97.668120] domain 2: span 0,2-3 level CPU
  703. [ 97.668124] groups: 0,2 (cpu_power = 1178) 3
  704. [ 97.668134] CPU3 attaching sched-domain:
  705. [ 97.668139] domain 0: span 0,2-3 level CPU
  706. [ 97.668143] groups: 3 0,2 (cpu_power = 1178)
  707. [ 97.671320] CPU 1 is now offline
  708. [ 97.672477] CPU0 attaching NULL sched-domain.
  709. [ 97.672486] CPU2 attaching NULL sched-domain.
  710. [ 97.672491] CPU3 attaching NULL sched-domain.
  711. [ 97.733038] CPU0 attaching sched-domain:
  712. [ 97.733045] domain 0: span 0,3 level CPU
  713. [ 97.733050] groups: 0 3
  714. [ 97.733059] CPU3 attaching sched-domain:
  715. [ 97.733064] domain 0: span 0,3 level CPU
  716. [ 97.733068] groups: 3 0
  717. [ 97.735598] CPU 2 is now offline
  718. [ 97.736847] CPU0 attaching NULL sched-domain.
  719. [ 97.736856] CPU3 attaching NULL sched-domain.
  720. [ 97.784048] CPU0 attaching NULL sched-domain.
  721. [ 97.888020] CPU 3 is now offline
  722. [ 97.888025] SMP alternatives: switching to UP code
  723. [ 97.894388] Back to C!
  724. [ 97.894388] CPU0: Thermal monitoring enabled (TM1)
  725. [ 97.899702] Enabling non-boot CPUs ...
  726. [ 97.900377] SMP alternatives: switching to SMP code
  727. [ 97.905611] Booting processor 1 APIC 0x2 ip 0x6000
  728. [ 97.672394] Initializing CPU#1
  729. [ 97.672394] CPU: L1 I cache: 32K, L1 D cache: 24K
  730. [ 97.672394] CPU: L2 cache: 512K
  731. [ 97.672394] CPU: Physical Processor ID: 0
  732. [ 97.672394] CPU: Processor Core ID: 1
  733. [ 97.672394] CPU1: Thermal monitoring enabled (TM1)
  734. [ 97.996137] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  735. [ 97.996155] checking TSC synchronization [CPU#0 -> CPU#1]:
  736. [ 98.000005] Measured 1431456844 cycles TSC warp between CPUs, turning off TSC clock.
  737. [ 98.000005] Marking TSC unstable due to check_tsc_sync_source failed
  738. [ 98.016453] Switching to clocksource acpi_pm
  739. [ 98.016482] CPU0 attaching NULL sched-domain.
  740. [ 98.116033] CPU0 attaching sched-domain:
  741. [ 98.116040] domain 0: span 0-1 level CPU
  742. [ 98.116045] groups: 0 1
  743. [ 98.116054] CPU1 attaching sched-domain:
  744. [ 98.116059] domain 0: span 0-1 level CPU
  745. [ 98.116063] groups: 1 0
  746. [ 98.116558] CPU1 is up
  747. [ 98.117352] Booting processor 2 APIC 0x1 ip 0x6000
  748. [ 97.736776] Initializing CPU#2
  749. [ 97.736776] CPU: L1 I cache: 32K, L1 D cache: 24K
  750. [ 97.736776] CPU: L2 cache: 512K
  751. [ 97.736776] CPU: Physical Processor ID: 0
  752. [ 97.736776] CPU: Processor Core ID: 0
  753. [ 97.736776] CPU2: Thermal monitoring enabled (TM1)
  754. [ 98.208088] CPU2: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  755. [ 98.208229] CPU0 attaching NULL sched-domain.
  756. [ 98.208236] CPU1 attaching NULL sched-domain.
  757. [ 98.416036] CPU0 attaching sched-domain:
  758. [ 98.416044] domain 0: span 0,2 level SIBLING
  759. [ 98.416050] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  760. [ 98.416060] domain 1: span 0,2 level MC
  761. [ 98.416065] groups: 0,2 (cpu_power = 1178)
  762. [ 98.416073] domain 2: span 0-2 level CPU
  763. [ 98.416078] groups: 0,2 (cpu_power = 1178) 1
  764. [ 98.416088] CPU1 attaching sched-domain:
  765. [ 98.416093] domain 0: span 0-2 level CPU
  766. [ 98.416097] groups: 1 0,2 (cpu_power = 1178)
  767. [ 98.416107] CPU2 attaching sched-domain:
  768. [ 98.416111] domain 0: span 0,2 level SIBLING
  769. [ 98.416116] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  770. [ 98.416126] domain 1: span 0,2 level MC
  771. [ 98.416130] groups: 0,2 (cpu_power = 1178)
  772. [ 98.416138] domain 2: span 0-2 level CPU
  773. [ 98.416142] groups: 0,2 (cpu_power = 1178) 1
  774. [ 98.417223] CPU2 is up
  775. [ 98.418062] Booting processor 3 APIC 0x3 ip 0x6000
  776. [ 97.899711] Initializing CPU#3
  777. [ 97.899711] CPU: L1 I cache: 32K, L1 D cache: 24K
  778. [ 97.899711] CPU: L2 cache: 512K
  779. [ 97.899711] CPU: Physical Processor ID: 0
  780. [ 97.899711] CPU: Processor Core ID: 1
  781. [ 97.899711] CPU3: Thermal monitoring enabled (TM1)
  782. [ 98.508089] CPU3: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
  783. [ 98.508278] CPU0 attaching NULL sched-domain.
  784. [ 98.508286] CPU1 attaching NULL sched-domain.
  785. [ 98.508291] CPU2 attaching NULL sched-domain.
  786. [ 98.748038] CPU0 attaching sched-domain:
  787. [ 98.748045] domain 0: span 0,2 level SIBLING
  788. [ 98.748051] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  789. [ 98.748062] domain 1: span 0,2 level MC
  790. [ 98.748066] groups: 0,2 (cpu_power = 1178)
  791. [ 98.748074] domain 2: span 0-3 level CPU
  792. [ 98.748079] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  793. [ 98.748091] CPU1 attaching sched-domain:
  794. [ 98.748095] domain 0: span 1,3 level SIBLING
  795. [ 98.748100] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
  796. [ 98.748110] domain 1: span 1,3 level MC
  797. [ 98.748114] groups: 1,3 (cpu_power = 1178)
  798. [ 98.748122] domain 2: span 0-3 level CPU
  799. [ 98.748126] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  800. [ 98.748138] CPU2 attaching sched-domain:
  801. [ 98.748143] domain 0: span 0,2 level SIBLING
  802. [ 98.748147] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  803. [ 98.748157] domain 1: span 0,2 level MC
  804. [ 98.748161] groups: 0,2 (cpu_power = 1178)
  805. [ 98.748169] domain 2: span 0-3 level CPU
  806. [ 98.748173] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  807. [ 98.748185] CPU3 attaching sched-domain:
  808. [ 98.748189] domain 0: span 1,3 level SIBLING
  809. [ 98.748193] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
  810. [ 98.748203] domain 1: span 1,3 level MC
  811. [ 98.748208] groups: 1,3 (cpu_power = 1178)
  812. [ 98.748215] domain 2: span 0-3 level CPU
  813. [ 98.748220] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  814. [ 98.749896] CPU3 is up
  815. [ 98.751976] ACPI: Waking up from system sleep state S3
  816. [ 98.753445] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
  817. [ 98.753495] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
  818. [ 98.753543] HDA Intel 0000:00:08.0: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
  819. [ 98.753612] forcedeth 0000:00:0a.0: restoring config space at offset 0x7 (was 0x0, writing 0xfae7e400)
  820. [ 98.753621] forcedeth 0000:00:0a.0: restoring config space at offset 0x6 (was 0x0, writing 0xfae7e800)
  821. [ 98.753671] ahci 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00407)
  822. [ 98.753725] pci 0000:00:10.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
  823. [ 98.753762] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xfafe0000, writing 0x0)
  824. [ 98.753776] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0)
  825. [ 98.753785] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007)
  826. [ 98.754435] PM: early resume of devices complete after 1.550 msecs
  827. [ 98.754982] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 16 (level, low) -> IRQ 16
  828. [ 98.754992] ohci_hcd 0000:00:04.0: setting latency timer to 64
  829. [ 98.776054] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 18 (level, low) -> IRQ 18
  830. [ 98.776064] ehci_hcd 0000:00:04.1: setting latency timer to 64
  831. [ 98.776168] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
  832. [ 98.776243] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
  833. [ 98.776316] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
  834. [ 98.776388] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
  835. [ 98.776401] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23
  836. [ 98.776410] HDA Intel 0000:00:08.0: setting latency timer to 64
  837. [ 98.776462] pci 0000:00:09.0: setting latency timer to 64
  838. [ 98.841572] forcedeth 0000:00:0a.0: irq 24 for MSI/MSI-X
  839. [ 98.841775] eth0: no link during initialization.
  840. [ 98.841960] ahci 0000:00:0b.0: setting latency timer to 64
  841. [ 98.842132] pci 0000:00:10.0: setting latency timer to 64
  842. [ 99.160081] ata4: SATA link down (SStatus 0 SControl 300)
  843. [ 99.160123] ata3: SATA link down (SStatus 0 SControl 300)
  844. [ 99.161552] ata6: SATA link down (SStatus 0 SControl 300)
  845. [ 99.161590] ata5: SATA link down (SStatus 0 SControl 300)
  846. [ 99.324137] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  847. [ 99.324178] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  848. [ 99.329821] ata2.00: configured for UDMA/100
  849. [ 99.334415] ata1.00: configured for UDMA/133
  850. [ 99.498588] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 656.422 msecs
  851. [ 99.732133] lirc_mceusb[3]: resume
  852. [ 99.732243] sd 0:0:0:0: [sda] Starting disk
  853. [ 99.765091] PM: resume of devices complete after 1010.624 msecs
  854. [ 99.765354] PM: resume devices took 1.012 seconds
  855. [ 99.765431] PM: Finishing wakeup.
  856. [ 99.765435] Restarting tasks ... done.
  857. [ 101.541010] eth0: link up.
  858.  
  859.  
  860.  
  861. [ 102.865729] nbd0: Attempted send on closed socket
  862. [ 102.865738] end_request: I/O error, dev nbd0, sector 3247552
  863. [ 102.865763] SQUASHFS error: squashfs_read_data failed to read block 0x631b825b
  864. [ 102.865769] SQUASHFS error: Unable to read metadata cache entry [631b825b]
  865. [ 102.865843] nbd0: Attempted send on closed socket
  866. [ 102.865849] end_request: I/O error, dev nbd0, sector 3253158
  867. [ 102.865864] SQUASHFS error: squashfs_read_data failed to read block 0x63474ca0
  868. [ 102.865869] SQUASHFS error: Unable to read metadata cache entry [63474ca0]
  869. [ 102.865874] SQUASHFS error: Unable to read directory block [63472c9e:1a3a]
  870. [ 102.865950] nbd0: Attempted send on closed socket
  871. [ 102.865955] end_request: I/O error, dev nbd0, sector 3253318
  872. [ 102.865970] SQUASHFS error: squashfs_read_data failed to read block 0x63488cb4
  873. [ 102.865975] SQUASHFS error: Unable to read metadata cache entry [63488cb4]
  874. [ 102.865980] SQUASHFS error: Unable to read directory block [63488cb4:1ed1]
  875.  
  876.  
  877.  
  878. [ 103.172218] CPU0 attaching NULL sched-domain.
  879. [ 103.172232] CPU1 attaching NULL sched-domain.
  880. [ 103.172238] CPU2 attaching NULL sched-domain.
  881. [ 103.172244] CPU3 attaching NULL sched-domain.
  882. [ 103.197639] CPU0 attaching sched-domain:
  883. [ 103.197649] domain 0: span 0,2 level SIBLING
  884. [ 103.197655] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
  885. [ 103.197668] domain 1: span 0,2 level MC
  886. [ 103.197674] groups: 0,2 (cpu_power = 1178)
  887. [ 103.197683] domain 2: span 0-3 level CPU
  888. [ 103.197689] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  889. [ 103.197704] CPU1 attaching sched-domain:
  890. [ 103.197709] domain 0: span 1,3 level SIBLING
  891. [ 103.197715] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
  892. [ 103.197727] domain 1: span 1,3 level MC
  893. [ 103.197732] groups: 1,3 (cpu_power = 1178)
  894. [ 103.197741] domain 2: span 0-3 level CPU
  895. [ 103.197746] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  896. [ 103.197760] CPU2 attaching sched-domain:
  897. [ 103.197765] domain 0: span 0,2 level SIBLING
  898. [ 103.197770] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
  899. [ 103.197782] domain 1: span 0,2 level MC
  900. [ 103.197787] groups: 0,2 (cpu_power = 1178)
  901. [ 103.197796] domain 2: span 0-3 level CPU
  902. [ 103.197801] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
  903. [ 103.197815] CPU3 attaching sched-domain:
  904. [ 103.197820] domain 0: span 1,3 level SIBLING
  905. [ 103.197825] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
  906. [ 103.197837] domain 1: span 1,3 level MC
  907. [ 103.197842] groups: 1,3 (cpu_power = 1178)
  908. [ 103.197852] domain 2: span 0-3 level CPU
  909. [ 103.197857] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
  910. dad@90e6ba974a82:~$
  911. dad@90e6ba974a82:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!