# diff -ub mele-1.3-script.fex mele-a1000.fex
--- mele-1.3-script.fex 2012-10-17 00:48:43.000000000 +0000
+++ mele-a1000.fex      2012-10-17 00:49:06.000000000 +0000
@@ -9,8 +9,6 @@
 ldo2_vol = 3000
 ldo3_vol = 2800
 ldo4_vol = 2800
-pll4_freq = 1200
-pll6_freq = 1200
 power_start = 1

 [card_burn_para]
@@ -98,7 +96,7 @@

 [mali_para]
 mali_used = 1
-mali_clkdiv = 4
+mali_clkdiv = 3

 [g2d_para]
 g2d_used = 1
@@ -124,7 +122,6 @@
 emac_crs = port:PA15<2><default><default><default>
 emac_col = port:PA16<2><default><default><default>
 emac_reset = port:PA17<1><default><default><default>
-emac_power =

 [twi0_para]
 twi0_used = 1
@@ -322,7 +319,7 @@
 disp_init_enable = 1
 disp_mode = 0
 screen0_output_type = 3
-screen0_output_mode = 5
+screen0_output_mode = 10
 screen1_output_type = 1
 screen1_output_mode = 4
 fb0_framebuffer_num = 2
@@ -333,16 +330,6 @@
 fb1_format = 10
 fb1_pixel_sequence = 0
 fb1_scaler_mode_enable = 1
-lcd0_bright = 197
-lcd1_bright = 197
-lcd0_screen_bright = 50
-lcd0_screen_contrast = 50
-lcd0_screen_saturation = 57
-lcd0_screen_hue = 50
-lcd1_screen_bright = 50
-lcd1_screen_contrast = 50
-lcd1_screen_saturation = 57
-lcd1_screen_hue = 50

 [lcd0_para]
 lcd_used = 1
@@ -728,10 +715,10 @@

 [usbc0]
 usb_used = 1
-usb_port_type = 2
-usb_detect_type = 1
-usb_id_gpio = port:PH04<0><0><default><default>
-usb_det_vbus_gpio = port:PH05<0><0><default><default>
+usb_port_type = 0
+usb_detect_type = 0
+usb_id_gpio =
+usb_det_vbus_gpio =
 usb_drv_vbus_gpio = port:PB09<1><0><default><0>
 usb_host_init_state = 0

@@ -852,12 +839,7 @@

 [audio_para]
 audio_used = 1
-capture_used = 1
-audio_lr_change = 0
-audio_pa_ctrl = port:PH15<1><default><default><0>
-
-[switch_para]
-switch_used = 0
+audio_pa_ctrl = port:PH07<1><default><default><0>

 [ir_para]
 ir_used = 1
@@ -868,8 +850,8 @@
 pmu_twi_addr = 52
 pmu_twi_id = 0
 pmu_irq_id = 0
-pmu_battery_rdc = 100
-pmu_battery_cap = 3200
+pmu_battery_rdc = 200
+pmu_battery_cap = 2600
 pmu_init_chgcur = 300
 pmu_earlysuspend_chgcur = 600
 pmu_suspend_chgcur = 1000
@@ -884,22 +866,20 @@
 pmu_init_chg_csttime = 720
 pmu_bat_para1 = 0
 pmu_bat_para2 = 0
-pmu_bat_para3 = 0
-pmu_bat_para4 = 0
-pmu_bat_para5 = 5
-pmu_bat_para6 = 8
-pmu_bat_para7 = 11
-pmu_bat_para8 = 22
-pmu_bat_para9 = 33
-pmu_bat_para10 = 43
-pmu_bat_para11 = 50
-pmu_bat_para12 = 59
-pmu_bat_para13 = 71
-pmu_bat_para14 = 83
+pmu_bat_para3 = 1
+pmu_bat_para4 = 5
+pmu_bat_para5 = 7
+pmu_bat_para6 = 13
+pmu_bat_para7 = 16
+pmu_bat_para8 = 26
+pmu_bat_para9 = 36
+pmu_bat_para10 = 46
+pmu_bat_para11 = 53
+pmu_bat_para12 = 61
+pmu_bat_para13 = 73
+pmu_bat_para14 = 84
 pmu_bat_para15 = 92
 pmu_bat_para16 = 100
-pmu_usbvol_limit = 1
-pmu_usbcur_limit = 0
 pmu_usbvol = 4000
 pmu_usbcur = 0
 pmu_usbvol_pc = 4000
@@ -929,11 +909,10 @@

 [gpio_para]
 gpio_used = 1
-gpio_num = 4
+gpio_num = 3
 gpio_pin_1 = port:PH10<1><default><default><0>
 gpio_pin_2 = port:PH20<1><default><default><1>
 gpio_pin_3 = port:PB03<0><default><default><default>
-gpio_pin_4 = port:PH22<1><default><default><0>

 [gpio_init]
 pin_1 = port:PH10<1><default><default><0>
@@ -942,26 +921,3 @@
 [dynamic]
 MAC = "000000000000"

-[system]
-recovery_key = port:PH16<0><1><default><default>
-
-[dvfs_table]
-max_freq = 1008000000
-min_freq = 60000000
-LV_count = 5
-LV1_freq = 1056000000
-LV1_volt = 1500
-LV2_freq = 1008000000
-LV2_volt = 1400
-LV3_freq = 912000000
-LV3_volt = 1350
-LV4_freq = 864000000
-LV4_volt = 1300
-LV5_freq = 624000000
-LV5_volt = 1250
-
-[boot_disp]
-output_type = 3
-output_mode = 5
-auto_hpd = 1
-