Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- INFO:
- EVM L138 OMAP
- 4-port USB Hub connected to USB2.0
- 2x USB-to-Serial Prolific connected to HUB
- root@arago:/lib/modules/3.3.0+/drivers/usb/gadget# lsusb -v
- Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0001 1.1 root hub
- bcdDevice 3.03
- iManufacturer 3 Linux 3.3.0+ ohci_hcd
- iProduct 2 DA8xx OHCI
- iSerial 1 ohci.0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0002 1x 2 bytes
- bInterval 255
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 1
- wHubCharacteristic 0x0002
- No power switching (usb 1.0)
- Ganged overcurrent protection
- bPwrOn2PwrGood 2 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0100 power
- Device Status: 0x0001
- Self Powered
- Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 1 Single TT
- bMaxPacketSize0 64
- idVendor 0x1d6b Linux Foundation
- idProduct 0x0002 2.0 root hub
- bcdDevice 3.03
- iManufacturer 3 Linux 3.3.0+ musb-hcd
- iProduct 2 MUSB HDRC host driver
- iSerial 1 musb-hdrc
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 0mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0004 1x 4 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 1
- wHubCharacteristic 0x0011
- Per-port power switching
- No overcurrent protection
- TT think time 8 FS bits
- bPwrOn2PwrGood 5 * 2 milli seconds
- bHubContrCurrent 0 milli Ampere
- DeviceRemovable 0x02
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0503 highspeed power enable connect
- Device Status: 0x0001
- Self Powered
- Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 1 Single TT
- bMaxPacketSize0 64
- idVendor 0x05e3 Genesys Logic, Inc.
- idProduct 0x0608 USB-2.0 4-Port HUB
- bcdDevice 7.02
- iManufacturer 0
- iProduct 1 USB2.0 Hub
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 25
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xe0
- Self Powered
- Remote Wakeup
- MaxPower 100mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 1
- bInterfaceClass 9 Hub
- bInterfaceSubClass 0 Unused
- bInterfaceProtocol 0 Full speed (or root) hub
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0001 1x 1 bytes
- bInterval 12
- Hub Descriptor:
- bLength 9
- bDescriptorType 41
- nNbrPorts 4
- wHubCharacteristic 0x00e0
- Ganged power switching
- Ganged overcurrent protection
- TT think time 32 FS bits
- Port indicators
- bPwrOn2PwrGood 50 * 2 milli seconds
- bHubContrCurrent 100 milli Ampere
- DeviceRemovable 0x00
- PortPwrCtrlMask 0xff
- Hub Port Status:
- Port 1: 0000.0103 power enable connect
- Port 2: 0000.0100 power
- Port 3: 0000.0103 power enable connect
- Port 4: 0000.0100 power
- Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 9 Hub
- bDeviceSubClass 0 Unused
- bDeviceProtocol 0 Full speed (or root) hub
- bMaxPacketSize0 64
- bNumConfigurations 1
- Device Status: 0x0003
- Self Powered
- Remote Wakeup Enabled
- Bus 002 Device 003: ID 0557:2008 ATEN International Co., Ltd UC-232A Serial Port []
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x0557 ATEN International Co., Ltd
- idProduct 0x2008 UC-232A Serial Port [pl2303]
- bcdDevice 3.00
- iManufacturer 1 Prolific Technology Inc.
- iProduct 2 USB-Serial Controller D
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 39
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 100mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 3
- bInterfaceClass 255 Vendor Specific Class
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x000a 1x 10 bytes
- bInterval 1
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x83 EP 3 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Device Status: 0x0000
- (Bus Powered)
- Bus 002 Device 004: ID 0557:2008 ATEN International Co., Ltd UC-232A Serial Port []
- Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 1.10
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x0557 ATEN International Co., Ltd
- idProduct 0x2008 UC-232A Serial Port [pl2303]
- bcdDevice 3.00
- iManufacturer 1 Prolific Technology Inc.
- iProduct 2 USB-Serial Controller D
- iSerial 0
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 39
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0xa0
- (Bus Powered)
- Remote Wakeup
- MaxPower 100mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 3
- bInterfaceClass 255 Vendor Specific Class
- bInterfaceSubClass 0
- bInterfaceProtocol 0
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 3
- Transfer Type Interrupt
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x000a 1x 10 bytes
- bInterval 1
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x83 EP 3 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0040 1x 64 bytes
- bInterval 0
- Device Status: 0x0000
- (Bus Powered)
- root@arago:/lib/modules/3.3.0+/drivers/usb/gadget#
- root@arago:/# lsusb -t
- /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
- |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/4p, 480M
- |__ Port 3: Dev 4, If 0, Class=vend., Driver=pl2303, 12M
- |__ Port 20: Dev 3, If 0, Class=vend., Driver=pl2303, 12M
- /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci/1p, 12M
- root@arago:/#
Advertisement
Add Comment
Please, Sign In to add comment