Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2013.04-dirty (Jul 10 2013 - 14:02:53)
- U-Boot SPL 2013.04-dirty (Jul 10 2013 - 14:02:53)
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4!!
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Peripheral mode controller at 47401000 using PIO, IRQ 0
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Host mode controller at 47401800 using PIO, IRQ 0
- OMAP SD/MMC: 031 max ep, 16384/16384 memory
- mmc_send_cmd : timeout: No status update00 using PIO, IRQ 0
- reading u-boot.imgata=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- reading u-boot.imgTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- U-Boot 2013.04-dirty (Jul 10 2013 - 14:02:53)O, IRQ 0
- Net: <ethaddr> not set. Validating first E-fuse MAC
- I2C: readyher
- DRAM: 512 MiB stop autoboot: 0
- WARNING: Caches not enabled
- NAND: No NAND device found!!!
- 0 MiB
- MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
- *** Warning - readenv() failed, using default environment
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Peripheral mode controller at 47401000 using PIO, IRQ 0
- musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb-hdrc: MHDRC RTL version 2.0
- musb-hdrc: setup fifo_mode 4
- musb-hdrc: 28/31 max ep, 16384/16384 memory
- USB Host mode controller at 47401800 using PIO, IRQ 0
- Net: <ethaddr> not set. Validating first E-fuse MAC
- cpsw, usb_ether
- Hit any key to stop autoboot: 0
- gpio: pin 53 (gpio 53) value is 1
- mmc_send_cmd : timeout: No status update
- Card did not respond to voltage select!
- mmc0(part 0) is current device
- mmc_send_cmd : timeout: No status update
- Card did not respond to voltage select!
- No micro SD card found, setting mmcdev to 1
- mmc_send_cmd : timeout: No status update
- mmc1(part 0) is current device
- mmc_send_cmd : timeout: No status update
- gpio: pin 54 (gpio 54) value is 1
- SD/MMC found on device 1
- reading uEnv.txt
- 26 bytes read in 3 ms (7.8 KiB/s)
- Loaded environment from uEnv.txt
- Importing environment from mmc ...
- gpio: pin 55 (gpio 55) value is 1
- 4310064 bytes read in 754 ms (5.5 MiB/s)
- gpio: pin 56 (gpio 56) value is 1
- 24808 bytes read in 53 ms (457 KiB/s)
- Booting from mmc ...
- ## Booting kernel from Legacy Image at 80007fc0 ...
- Image Name: Angstrom/3.8.13/beaglebone
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4310000 Bytes = 4.1 MiB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 80f80000
- Booting using the fdt blob at 0x80f80000
- XIP Kernel Image ... OK
- OK
- Using Device Tree in place at 80f80000, end 80f890e7
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.195513] omap2_mbox_probe: platform not supported
- [ 0.206134] tps65217-bl tps65217-bl: no platform data provided
- [ 0.282551] bone-capemgr bone_capemgr.8: slot #0: No cape found
- [ 0.319659] bone-capemgr bone_capemgr.8: slot #1: No cape found
- [ 0.356766] bone-capemgr bone_capemgr.8: slot #2: No cape found
- [ 0.393875] bone-capemgr bone_capemgr.8: slot #3: No cape found
- [ 0.413620] bone-capemgr bone_capemgr.8: slot #6: BB-BONELT-HDMIN conflict P8.45 (#5:BB-BONELT-HDMI)
- [ 0.423235] bone-capemgr bone_capemgr.8: slot #6: Failed verification
- [ 0.443776] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
- [ 0.451072] bone-capemgr bone_capemgr.8: loader: failed to load slot-6 BB-BONELT-HDMIN:00A0 (prio 2)
- [ 0.517406] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
- [ 0.529146] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
- [ 0.536474] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
- [ 0.942685] tilcdc 4830e000.fb: timeout waiting for framedone
- [ 7.391000] libphy: PHY 4a101000.mdio:01 not found
- [ 7.396066] net eth0: phy 4a101000.mdio:01 not found on slave 1
- systemd-fsck[86]: Angstrom: clean, 49241/112672 files, 282006/449820 blocks
- .---O---.
- | | .-. o o
- | | |-----.-----.-----.| | .----..-----.-----.
- | | | __ | ---'| '--.| .-'| | |
- | | | | | |--- || --'| | | ' | | | |
- '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
- -' |
- '---'
- The Angstrom Distribution beaglebone ttyO0
- Angstrom v2012.12 - Kernel 3.8.13
- beaglebone login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement