(** This GCode was generated by ReplicatorG 0040 **)
(*  using Skeinforge (50)  *)
(*  for a Dual headed Replicator 2  *)
(*  on 2015/10/28 13:51:54 (+0100) *)
(**** start.gcode for Replicator 2X, single head ****)
M103 (disable RPM)
M73 P0 (enable build progress)
G21 (set units to mm)
G90 (set positioning to absolute)
M104 S220 T0 (set extruder temperature) (temp updated by printOMatic)
M109 S110 T0 (set HBP temperature)
(**** begin homing ****)
G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
G161 Z F100 (home Z axis minimum)
M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
(**** end homing ****)
G1 X-141 Y-74 Z150 F3300.0 (move to waiting position)
G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)
M6 T0 (wait for toolhead, and HBP to reach temperature)
G130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)
M108 R3.0 T0
G0 X-141 Y-74 (Position Nozzle)
G0 Z0.6      (Position Height)
M108 R5.0    (Set Extruder Speed)
M101         (Start Extruder)
G4 P2000     (Create Anchor)
(**** end of start.gcode ****)
(** This GCode was generated by ReplicatorG 0040 **)
(*  using Skeinforge (50)  *)
(*  for a Dual headed Replicator 2  *)
(*  on 2015/10/28 13:38:30 (+0100) *)
(**** start.gcode for Replicator 2X, single head ****)
M103 (disable RPM)
M73 P0 (enable build progress)
G21 (set units to mm)
G90 (set positioning to absolute)
M104 S220 T0 (set extruder temperature) (temp updated by printOMatic)
M109 S110 T0 (set HBP temperature)
(**** begin homing ****)
G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
G161 Z F100 (home Z axis minimum)
M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
(**** end homing ****)
G1 X-141 Y-74 Z150 F3300.0 (move to waiting position)
G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)
M6 T0 (wait for toolhead, and HBP to reach temperature)
G130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)
M108 R3.0 T0
G0 X-141 Y-74 (Position Nozzle)
G0 Z0.6      (Position Height)
M108 R5.0    (Set Extruder Speed)
M101         (Start Extruder)
G4 P2000     (Create Anchor)
(**** end of start.gcode ****)
(** This GCode was generated by ReplicatorG 0040 **)
(*  using Skeinforge (50)  *)
(*  for a Dual headed Replicator 2  *)
(*  on 2015/10/28 13:21:17 (+0100) *)
(**** start.gcode for Replicator 2X, single head ****)
M103 (disable RPM)
M73 P0 (enable build progress)
G21 (set units to mm)
G90 (set positioning to absolute)
M104 S220 T0 (set extruder temperature) (temp updated by printOMatic)
M109 S110 T0 (set HBP temperature)
(**** begin homing ****)
G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
G161 Z F100 (home Z axis minimum)
M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
(**** end homing ****)
G1 X-141 Y-74 Z150 F3300.0 (move to waiting position)
G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)
M6 T0 (wait for toolhead, and HBP to reach temperature)
G130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)
M108 R3.0 T0
G0 X-141 Y-74 (Position Nozzle)
G0 Z0.6      (Position Height)
M108 R5.0    (Set Extruder Speed)
M101         (Start Extruder)
G4 P2000     (Create Anchor)
(**** end of start.gcode ****)
(** This GCode was generated by ReplicatorG 0040 **)
(*  using Skeinforge (50)  *)
(*  for a Dual headed Replicator 2  *)
(*  on 2015/10/27 17:48:10 (+0100) *)
(**** start.gcode for Replicator 2X, single head ****)
M103 (disable RPM)
M73 P0 (enable build progress)
G21 (set units to mm)
G90 (set positioning to absolute)
M104 S220 T0 (set extruder temperature) (temp updated by printOMatic)
M109 S110 T0 (set HBP temperature)
(**** begin homing ****)
G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
G161 Z F100 (home Z axis minimum)
M132 X Y Z A B (Recall stored home offsets for XYZAB axis)
(**** end homing ****)
G1 X-141 Y-74 Z150 F3300.0 (move to waiting position)
G130 X20 Y20 Z20 A20 B20 (Lower stepper Vrefs while heating)
M6 T0 (wait for toolhead, and HBP to reach temperature)
G130 X127 Y127 Z40 A127 B127 (Set Stepper motor Vref to defaults)
M108 R3.0 T0
G0 X-141 Y-74 (Position Nozzle)
G0 Z0.6      (Position Height)
M108 R5.0    (Set Extruder Speed)
M101         (Start Extruder)
G4 P2000     (Create Anchor)
(**** end of start.gcode ****)


; ------------------------------------
; Layer #0
; ------------------------------------
G21 ; mm
G90 ; abs
G92 E0 ; reset extr
M106 S0
;segType:Skirt
G0 F4800 E-1.000
G0 F2400 Z0.200
G0 F4800 X215.831 Y94.804
G0 F4800 E0.000
G1 F600 X215.635 Y94.622 E0.0089
G1 X215.177 Y94.195 E0.0297
G1 X214.850 Y94.012 E0.0422
G1 X57.420 Y94.012 E5.2783
G1 X57.027 Y94.134 E5.2920
G1 X53.889 Y97.059 E5.4347
G1 X53.693 Y97.364 E5.4467
G1 X53.693 Y135.145 E6.7033
G1 X56.831 Y138.070 E6.8460
G1 X57.289 Y138.374 E6.8643
G1 X214.720 Y138.374 E12.1005
G1 X214.809 Y138.347 E12.1036
G0 F4800 X60.716 Y133.097
G0 X58.104 Y133.008
;segType:Loop
G1 F600 X58.104 Y98.839 E13.2400
G1 X58.112 Y98.695 E13.2448
G1 X58.240 Y98.435 E13.2545
G1 X58.528 Y98.314 E13.2649
G1 X213.454 Y98.313 E18.4177
G1 X213.719 Y98.393 E18.4269
G1 X213.872 Y98.604 E18.4356
G1 X213.904 Y98.846 E18.4437
G1 X213.904 Y133.663 E19.6018
G1 X213.872 Y133.904 E19.6098
G1 X213.720 Y134.115 E19.6185
G1 X213.455 Y134.195 E19.6277
G1 X58.555 Y134.195 E24.7797
G1 X58.289 Y134.116 E24.7889
G1 X58.138 Y133.909 E24.7974
G1 X58.104 Y133.616 E24.8073
G1 X58.104 Y133.191 E24.8214
;segType:Perimeter
G0 X58.385 Y134.230 F4800
G1 F359 X57.742 Y133.957 E24.8446
G1 X57.704 Y133.636 E24.8554
G1 X57.704 Y98.830 E26.0130
G1 X57.715 Y98.631 E26.0197
G1 X57.795 Y98.383 E26.0283
G1 X57.944 Y98.177 E26.0368
G1 X58.146 Y98.030 E26.0451
G1 X58.388 Y97.951 E26.0536
G1 X58.511 Y97.941 E26.0577
G1 X213.487 Y97.941 E31.2122
G1 X213.747 Y97.982 E31.2209
G1 X213.968 Y98.094 E31.2292
G1 X214.146 Y98.272 E31.2376
G1 X214.261 Y98.498 E31.2460
G1 X214.304 Y98.823 E31.2569
G1 X214.304 Y133.686 E32.4165
G1 X214.261 Y134.009 E32.4273
G1 X214.147 Y134.235 E32.4357
G1 X213.969 Y134.413 E32.4441
G1 X213.748 Y134.526 E32.4523
G1 X213.489 Y134.568 E32.4611
G1 X58.521 Y134.568 E37.6153
G1 X58.262 Y134.527 E37.6241
G1 X58.041 Y134.414 E37.6323
G1 X57.862 Y134.236 E37.6407
G1 X57.774 Y134.061 E37.6472
G1 X58.169 Y133.515
;segType:HShell
G0 X58.501 Y132.001 F4800
G1 F600 X58.501 Y98.849 E38.7499
G1 X58.539 Y98.714 E38.7545
G1 X58.613 Y98.683 E38.7572
G1 X213.392 Y98.683 E43.9051
G1 X213.490 Y98.737 E43.9089
G1 X213.508 Y98.869 E43.9133
G1 X213.508 Y133.640 E45.0698
G1 X213.467 Y133.803 E45.0754
G1 X213.393 Y133.825 E45.0780
G1 X58.617 Y133.826 E50.2259
G1 X58.522 Y133.778 E50.2294
G1 X58.501 Y133.596 E50.2355
G1 X58.501 Y132.184 E50.2824
G0 X58.893 Y130.995 F4800
G1 F600 X58.893 Y99.049 E51.3449
G1 X213.115 Y99.049 E56.4744
G1 X213.115 Y133.459 E57.6189
G1 X58.893 Y133.460 E62.7483
G1 X58.893 Y131.178 E62.8242
G0 X59.286 Y129.988 F4800
G1 F600 X59.286 Y99.415 E63.8411
G1 X212.722 Y99.415 E68.9444
G1 X212.722 Y133.093 E70.0645
G1 X59.286 Y133.094 E75.1678
G1 X59.286 Y130.171 E75.2650
G0 X59.679 Y128.982 F4800
G1 F600 X59.679 Y99.781 E76.2362
G1 X212.330 Y99.781 E81.3134
G1 X212.330 Y132.727 E82.4092
G1 X59.679 Y132.727 E87.4864
G1 X59.679 Y129.165 E87.6049
G0 X60.072 Y127.975 F4800
G1 F600 X60.072 Y100.147 E88.5304
G1 X211.937 Y100.147 E93.5815
G1 X211.937 Y132.361 E94.6529
G1 X60.072 Y132.361 E99.7040
G1 X60.072 Y128.158 E99.8438
G0 X60.857 Y125.962 F4800
G1 F600 X60.857 Y100.880 E100.6780
G1 X211.151 Y100.879 E105.6768
G1 X211.151 Y131.629 E106.6996
G1 X60.857 Y131.629 E111.6983
G1 X60.857 Y126.145 E111.8807
G0 X61.250 Y124.956 F4800
G1 F600 X61.250 Y101.246 E112.6693
G1 X210.758 Y101.246 E117.6420
G1 X210.758 Y131.263 E118.6404
G1 X61.250 Y131.263 E123.6131
G1 X61.250 Y125.139 E123.8167
G0 X61.643 Y123.949 F4800
G1 F600 X61.643 Y101.612 E124.5597
G1 X210.366 Y101.612 E129.5062
G1 X210.366 Y130.897 E130.4803
G1 X61.643 Y130.897 E135.4268
G1 X61.643 Y124.132 E135.6518
G0 X62.428 Y121.936 F4800
G1 F600 X62.428 Y102.344 E136.3034
G1 X209.580 Y102.344 E141.1977
G1 X209.580 Y130.164 E142.1231
G1 X62.428 Y130.165 E147.0173
G1 X62.428 Y122.119 E147.2849
G0 X62.821 Y120.930 F4800
G1 F600 X62.821 Y102.710 E147.8909
G1 X209.187 Y102.710 E152.7591
G1 X209.187 Y129.798 E153.6601
G1 X62.821 Y129.799 E158.5282
G1 X62.821 Y121.113 E158.8171
G0 X63.214 Y119.923 F4800
G1 F600 X63.214 Y103.076 E159.3774
G1 X208.795 Y103.076 E164.2195
G1 X208.795 Y129.432 E165.0961
G1 X63.214 Y129.432 E169.9381
G1 X63.214 Y120.106 E170.2483
G0 X75.083 Y110.032 F4800
G1 F600 X201.332 Y110.032 E174.4474
G1 X201.332 Y122.476 E174.8613
G1 X70.677 Y122.477 E179.2069
G1 X70.677 Y110.032 E179.6207
G1 X74.886 Y110.032 E179.7607
G0 X77.242 Y110.764 F4800
G1 F600 X200.546 Y110.764 E183.8619
G1 X200.546 Y121.744 E184.2270
G1 X71.462 Y121.744 E188.5204
G1 X71.462 Y110.764 E188.8856
G1 X77.046 Y110.764 E189.0713
G0 X78.322 Y111.131 F4800
G1 F600 X200.153 Y111.130 E193.1234
G1 X200.153 Y121.378 E193.4643
G1 X71.855 Y121.378 E197.7315
G1 X71.855 Y111.131 E198.0723
G1 X78.126 Y111.131 E198.2809
G0 X79.402 Y111.497 F4800
G1 F600 X199.761 Y111.496 E202.2840
G1 X199.761 Y121.012 E202.6005
G1 X72.248 Y121.012 E206.8416
G1 X72.248 Y111.497 E207.1581
G1 X79.206 Y111.497 E207.3895
G0 X81.561 Y112.229 F4800
G1 F600 X198.975 Y112.229 E211.2947
G1 X198.975 Y120.280 E211.5625
G1 X73.033 Y120.280 E215.7513
G1 X73.033 Y112.229 E216.0191
G1 X81.365 Y112.229 E216.2962
G0 X83.721 Y112.961 F4800
G1 F600 X198.189 Y112.961 E220.1034
G1 X198.189 Y119.548 E220.3225
G1 X73.819 Y119.548 E224.4591
G1 X73.819 Y112.961 E224.6781
G1 X83.525 Y112.961 E225.0009
G0 X84.801 Y113.327 F4800
G1 F600 X197.797 Y113.327 E228.7592
G1 X197.797 Y119.181 E228.9539
G1 X74.212 Y119.182 E233.0644
G1 X74.212 Y113.327 E233.2591
G1 X84.605 Y113.327 E233.6047
G0 X85.881 Y113.693 F4800
G1 F600 X197.404 Y113.693 E237.3140
G1 X197.404 Y118.815 E237.4844
G1 X74.605 Y118.816 E241.5687
G1 X74.605 Y113.693 E241.7391
G1 X85.684 Y113.693 E242.1076
G0 X89.120 Y114.792 F4800
G1 F600 X196.226 Y114.791 E245.6699
G1 X196.226 Y117.717 E245.7672
G1 X75.783 Y117.717 E249.7732
G1 X75.783 Y114.792 E249.8705
G1 X88.924 Y114.792 E250.3075
G0 X88.040 Y114.425 F4800
G1 F600 X196.618 Y114.425 E253.9189
G1 X196.618 Y118.083 E254.0405
G1 X75.390 Y118.083 E258.0726
G1 X75.390 Y114.425 E258.1943
G1 X87.844 Y114.425 E258.6085
G0 X90.200 Y115.158 F4800
G1 F600 X195.833 Y115.157 E262.1218
G1 X195.833 Y117.351 E262.1948
G1 X76.176 Y117.351 E266.1746
G1 X76.176 Y115.158 E266.2476
G1 X90.004 Y115.158 E266.7075
G0 X91.280 Y115.524 F4800
G1 F600 X195.440 Y115.524 E270.1719
G1 X195.440 Y116.985 E270.2205
G1 X76.569 Y116.985 E274.1742
G1 X76.569 Y115.524 E274.2228
G1 X91.084 Y115.524 E274.7055
G0 X92.360 Y115.890 F4800
G1 F600 X195.047 Y115.890 E278.1210
G1 X195.047 Y116.619 E278.1452
G1 X76.961 Y116.619 E282.0728
G1 X76.961 Y115.890 E282.0970
G1 X92.163 Y115.890 E282.6026
G0 X86.961 Y114.059 F4800
G1 F600 X197.011 Y114.059 E286.2630
G1 X197.011 Y118.449 E286.4090
G1 X74.997 Y118.449 E290.4672
G1 X74.997 Y114.059 E290.6132
G1 X86.764 Y114.059 E291.0046
G0 X82.641 Y112.595 F4800
G1 F600 X198.582 Y112.595 E294.8608
G1 X198.582 Y119.914 E295.1042
G1 X73.426 Y119.914 E299.2669
G1 X73.426 Y112.595 E299.5104
G1 X82.445 Y112.595 E299.8103
G0 X80.482 Y111.863 F4800
G1 F600 X199.368 Y111.862 E303.7645
G1 X199.368 Y120.646 E304.0566
G1 X72.641 Y120.646 E308.2716
G1 X72.641 Y111.863 E308.5637
G1 X80.285 Y111.863 E308.8180
G0 X76.162 Y110.398 F4800
G1 F600 X200.939 Y110.398 E312.9681
G1 X200.939 Y122.110 E313.3576
G1 X71.070 Y122.110 E317.6771
G1 X71.070 Y110.398 E318.0667
G1 X75.966 Y110.398 E318.2295
G0 X74.003 Y109.666 F4800
G1 F600 X201.725 Y109.666 E322.4776
G1 X201.725 Y122.842 E322.9158
G1 X70.284 Y122.843 E327.2875
G1 X70.284 Y109.666 E327.7258
G1 X73.806 Y109.666 E327.8430
G0 X72.923 Y109.300 F4800
G1 F600 X202.117 Y109.300 E332.1400
G1 X202.117 Y123.209 E332.6026
G1 X69.891 Y123.209 E337.0005
G1 X69.891 Y109.300 E337.4631
G1 X72.727 Y109.300 E337.5574
G0 X71.843 Y108.934 F4800
G1 F600 X202.510 Y108.934 E341.9034
G1 X202.510 Y123.575 E342.3904
G1 X69.498 Y123.575 E346.8143
G1 X69.498 Y108.934 E347.3013
G1 X71.647 Y108.934 E347.3728
G0 X70.763 Y108.568 F4800
G1 F600 X202.903 Y108.568 E351.7677
G1 X202.903 Y123.941 E352.2791
G1 X69.106 Y123.941 E356.7292
G1 X69.106 Y108.568 E357.2405
G1 X70.567 Y108.568 E357.2891
G0 X69.683 Y108.202 F4800
G1 F600 X203.296 Y108.201 E361.7331
G1 X203.296 Y124.307 E362.2688
G1 X68.713 Y124.307 E366.7450
G1 X68.713 Y108.202 E367.2807
G1 X69.487 Y108.202 E367.3064
G0 X68.604 Y107.836 F4800
G1 F600 X203.688 Y107.835 E371.7994
G1 X203.688 Y124.673 E372.3594
G1 X68.320 Y124.673 E376.8618
G1 X68.320 Y107.836 E377.4218
G1 X68.407 Y107.836 E377.4247
G0 X67.927 Y107.846 F4800
G1 F600 X67.927 Y107.470 E377.4372
G1 X204.081 Y107.469 E381.9657
G1 X204.081 Y125.039 E382.5501
G1 X67.927 Y125.039 E387.0786
G1 X67.927 Y108.029 E387.6444
G0 X67.535 Y108.852 F4800
G1 F600 X67.535 Y107.103 E387.7025
G1 X204.474 Y107.103 E392.2572
G1 X204.474 Y125.405 E392.8659
G1 X67.535 Y125.405 E397.4205
G1 X67.535 Y109.035 E397.9650
G0 X67.142 Y109.859 F4800
G1 F600 X67.142 Y106.737 E398.0688
G1 X204.867 Y106.737 E402.6495
G1 X204.867 Y125.771 E403.2826
G1 X67.142 Y125.771 E407.8634
G1 X67.142 Y110.042 E408.3865
G0 X66.749 Y110.865 F4800
G1 F600 X66.749 Y106.371 E408.5360
G1 X205.260 Y106.371 E413.1429
G1 X205.260 Y126.137 E413.8003
G1 X66.749 Y126.138 E418.4072
G1 X66.749 Y111.048 E418.9091
G0 X66.356 Y111.872 F4800
G1 F600 X66.356 Y106.005 E419.1042
G1 X205.652 Y106.005 E423.7372
G1 X205.652 Y126.503 E424.4190
G1 X66.356 Y126.504 E429.0520
G1 X66.356 Y112.055 E429.5326
G0 X65.963 Y112.878 F4800
G1 F600 X65.963 Y105.639 E429.7734
G1 X206.045 Y105.639 E434.4326
G1 X206.045 Y126.870 E435.1387
G1 X65.963 Y126.870 E439.7978
G1 X65.963 Y113.061 E440.2571
G0 X65.571 Y113.885 F4800
G1 F600 X65.571 Y105.273 E440.5436
G1 X206.438 Y105.273 E445.2288
G1 X206.438 Y127.236 E445.9593
G1 X65.571 Y127.236 E450.6446
G1 X65.571 Y114.068 E451.0826
G0 X65.178 Y114.891 F4800
G1 F600 X65.178 Y104.907 E451.4147
G1 X206.831 Y104.907 E456.1261
G1 X206.831 Y127.602 E456.8809
G1 X65.178 Y127.602 E461.5923
G1 X65.178 Y115.074 E462.0090
G0 X64.785 Y115.898 F4800
G1 F600 X64.785 Y104.541 E462.3867
G1 X207.223 Y104.540 E467.1242
G1 X207.223 Y127.968 E467.9034
G1 X64.785 Y127.968 E472.6410
G1 X64.785 Y116.081 E473.0363
G0 X64.392 Y116.904 F4800
G1 F600 X64.392 Y104.175 E473.4597
G1 X207.616 Y104.174 E478.2234
G1 X207.616 Y128.334 E479.0269
G1 X64.392 Y128.334 E483.7906
G1 X64.392 Y117.087 E484.1646
G0 X64.000 Y117.910 F4800
G1 F600 X64.000 Y103.808 E484.6337
G1 X208.009 Y103.808 E489.4234
G1 X208.009 Y128.700 E490.2513
G1 X64.000 Y128.700 E495.0411
G1 X64.000 Y118.093 E495.3939
G0 X63.607 Y118.917 F4800
G1 F600 X63.607 Y103.442 E495.9086
G1 X208.402 Y103.442 E500.7245
G1 X208.402 Y129.066 E501.5767
G1 X63.607 Y129.066 E506.3926
G1 X63.607 Y119.100 E506.7241
G0 X62.036 Y122.943 F4800
G1 F600 X62.036 Y101.978 E507.4214
G1 X209.973 Y101.978 E512.3418
G1 X209.973 Y130.531 E513.2915
G1 X62.036 Y130.531 E518.2119
G1 X62.036 Y123.126 E518.4582
G0 X60.465 Y126.969 F4800
G1 F600 X60.465 Y100.514 E519.3380
G1 X211.544 Y100.513 E524.3629
G1 X211.544 Y131.995 E525.4100
G1 X60.465 Y131.995 E530.4349
G1 X60.465 Y127.152 E530.5960
; ------------------------------------
; Layer #1
; ------------------------------------
G21 ; mm
G90 ; abs
G92 E0 ; reset extr
M106 S255
;segType:Loop
G0 F4800 E-1.000
G0 F2400 Z0.300
G0 F4800 X58.104 Y133.009
G0 F4800 E0.000
G1 F2400 X58.104 Y98.907 E0.5671
G1 X58.113 Y98.693 E0.5707
G1 X58.240 Y98.435 E0.5755
G1 X58.527 Y98.314 E0.5806
G1 X213.454 Y98.313 E3.1571
G1 X213.719 Y98.393 E3.1617
G1 X213.870 Y98.600 E3.1659
G1 X213.904 Y98.898 E3.1709
G1 X213.904 Y133.611 E3.7482
G1 X213.870 Y133.907 E3.7532
G1 X213.720 Y134.115 E3.7574
G1 X213.456 Y134.195 E3.7620
G1 X58.555 Y134.195 E6.3381
G1 X58.289 Y134.116 E6.3427
G1 X58.142 Y133.915 E6.3468
G1 X58.104 Y133.514 E6.3535
G1 X58.104 Y133.192 E6.3589
;segType:Perimeter
G0 X58.386 Y134.235 F4800
G1 F1439 X57.744 Y133.959 E6.3705
G1 X57.704 Y133.530 E6.3776
G1 X57.704 Y98.900 E6.9535
G1 X57.715 Y98.632 E6.9580
G1 X57.795 Y98.384 E6.9623
G1 X57.943 Y98.178 E6.9666
G1 X58.145 Y98.031 E6.9707
G1 X58.387 Y97.951 E6.9750
G1 X58.510 Y97.941 E6.9770
G1 X213.487 Y97.941 E9.5543
G1 X213.747 Y97.982 E9.5587
G1 X213.968 Y98.094 E9.5628
G1 X214.146 Y98.272 E9.5670
G1 X214.260 Y98.497 E9.5712
G1 X214.304 Y98.878 E9.5775
G1 X214.304 Y133.631 E10.1555
G1 X214.261 Y134.009 E10.1618
G1 X214.147 Y134.234 E10.1660
G1 X213.970 Y134.412 E10.1702
G1 X213.749 Y134.526 E10.1743
G1 X213.491 Y134.568 E10.1787
G1 X58.521 Y134.568 E12.7558
G1 X58.262 Y134.527 E12.7602
G1 X58.041 Y134.414 E12.7643
G1 X57.862 Y134.236 E12.7685
G1 X57.774 Y134.063 E12.7717
G1 X58.179 Y133.523
;segType:HShell
G0 X58.501 Y132.003 F4800
G1 F2400 X58.501 Y98.914 E13.3220
G1 X58.539 Y98.715 E13.3254
G1 X58.613 Y98.683 E13.3267
G1 X213.392 Y98.683 E15.9007
G1 X213.486 Y98.731 E15.9025
G1 X213.508 Y98.917 E15.9056
G1 X213.508 Y133.591 E16.4822
G1 X213.468 Y133.803 E16.4858
G1 X213.393 Y133.825 E16.4871
G1 X58.617 Y133.826 E19.0610
G1 X58.527 Y133.786 E19.0627
G1 X58.501 Y133.497 E19.0675
G1 X58.501 Y132.186 E19.0893
G0 X58.893 Y130.996 F4800
G1 F2400 X58.893 Y99.049 E19.6206
G1 X213.115 Y99.049 E22.1853
G1 X213.115 Y133.459 E22.7575
G1 X58.893 Y133.460 E25.3223
G1 X58.893 Y131.179 E25.3602
G0 X59.286 Y129.990 F4800
G1 F2400 X59.286 Y99.415 E25.8686
G1 X212.722 Y99.415 E28.4203
G1 X212.722 Y133.093 E28.9804
G1 X59.286 Y133.094 E31.5320
G1 X59.286 Y130.173 E31.5806
G0 X59.679 Y128.983 F4800
G1 F2400 X59.679 Y99.781 E32.0662
G1 X212.330 Y99.781 E34.6048
G1 X212.330 Y132.727 E35.1527
G1 X59.679 Y132.727 E37.6913
G1 X59.679 Y129.166 E37.7505
G0 X60.072 Y127.977 F4800
G1 F2400 X60.072 Y100.147 E38.2133
G1 X211.937 Y100.147 E40.7388
G1 X211.937 Y132.361 E41.2746
G1 X60.072 Y132.361 E43.8001
G1 X60.072 Y128.160 E43.8700
G0 X60.857 Y125.964 F4800
G1 F2400 X60.857 Y100.880 E44.2871
G1 X211.151 Y100.879 E46.7865
G1 X211.151 Y131.629 E47.2979
G1 X60.857 Y131.629 E49.7973
G1 X60.857 Y126.147 E49.8884
G0 X61.643 Y123.951 F4800
G1 F2400 X61.643 Y101.612 E50.2599
G1 X210.366 Y101.612 E52.7332
G1 X210.366 Y130.897 E53.2202
G1 X61.643 Y130.897 E55.6935
G1 X61.643 Y124.134 E55.8060
G0 X62.428 Y121.938 F4800
G1 F2400 X62.428 Y102.344 E56.1318
G1 X209.580 Y102.344 E58.5790
G1 X209.580 Y130.164 E59.0416
G1 X62.428 Y130.165 E61.4888
G1 X62.428 Y122.121 E61.6225
G0 X62.821 Y120.931 F4800
G1 F2400 X62.821 Y102.710 E61.9255
G1 X209.187 Y102.710 E64.3596
G1 X209.187 Y129.798 E64.8101
G1 X62.821 Y129.799 E67.2442
G1 X62.821 Y121.114 E67.3886
G0 X63.214 Y119.925 F4800
G1 F2400 X63.214 Y103.076 E67.6688
G1 X208.795 Y103.076 E70.0898
G1 X208.795 Y129.432 E70.5281
G1 X63.214 Y129.432 E72.9491
G1 X63.214 Y120.108 E73.1042
G0 X75.081 Y110.032 F4800
G1 F2400 X201.332 Y110.032 E75.2038
G1 X201.332 Y122.476 E75.4107
G1 X70.677 Y122.477 E77.5835
G1 X70.677 Y110.032 E77.7905
G1 X74.885 Y110.032 E77.8604
G0 X77.241 Y110.764 F4800
G1 F2400 X200.546 Y110.764 E79.9110
G1 X200.546 Y121.744 E80.0936
G1 X71.462 Y121.744 E82.2403
G1 X71.462 Y110.764 E82.4229
G1 X77.044 Y110.764 E82.5157
G0 X78.320 Y111.131 F4800
G1 F2400 X200.153 Y111.130 E84.5418
G1 X200.153 Y121.378 E84.7122
G1 X71.855 Y121.378 E86.8458
G1 X71.855 Y111.131 E87.0163
G1 X78.124 Y111.131 E87.1205
G0 X79.400 Y111.497 F4800
G1 F2400 X199.761 Y111.496 E89.1221
G1 X199.761 Y121.012 E89.2803
G1 X72.248 Y121.012 E91.4009
G1 X72.248 Y111.497 E91.5591
G1 X79.204 Y111.497 E91.6748
G0 X81.560 Y112.229 F4800
G1 F2400 X198.975 Y112.229 E93.6274
G1 X198.975 Y120.280 E93.7613
G1 X73.033 Y120.280 E95.8557
G1 X73.033 Y112.229 E95.9896
G1 X81.363 Y112.229 E96.1281
G0 X83.719 Y112.961 F4800
G1 F2400 X198.189 Y112.961 E98.0318
G1 X198.189 Y119.548 E98.1413
G1 X73.819 Y119.548 E100.2096
G1 X73.819 Y112.961 E100.3191
G1 X83.523 Y112.961 E100.4805
G0 X84.799 Y113.327 F4800
G1 F2400 X197.797 Y113.327 E102.3597
G1 X197.797 Y119.181 E102.4570
G1 X74.212 Y119.182 E104.5123
G1 X74.212 Y113.327 E104.6096
G1 X84.603 Y113.327 E104.7824
G0 X85.879 Y113.693 F4800
G1 F2400 X197.404 Y113.693 E106.6371
G1 X197.404 Y118.815 E106.7223
G1 X74.605 Y118.816 E108.7644
G1 X74.605 Y113.693 E108.8496
G1 X85.683 Y113.693 E109.0339
G0 X89.119 Y114.792 F4800
G1 F2400 X196.226 Y114.791 E110.8150
G1 X196.226 Y117.717 E110.8637
G1 X75.783 Y117.717 E112.8667
G1 X75.783 Y114.792 E112.9153
G1 X88.922 Y114.792 E113.1338
G0 X88.039 Y114.425 F4800
G1 F2400 X196.618 Y114.425 E114.9395
G1 X196.618 Y118.083 E115.0003
G1 X75.390 Y118.083 E117.0164
G1 X75.390 Y114.425 E117.0772
G1 X87.842 Y114.425 E117.2843
G0 X90.198 Y115.158 F4800
G1 F2400 X195.833 Y115.157 E119.0410
G1 X195.833 Y117.351 E119.0775
G1 X76.176 Y117.351 E121.0674
G1 X76.176 Y115.158 E121.1039
G1 X90.002 Y115.158 E121.3338
G0 X91.278 Y115.524 F4800
G1 F2400 X195.440 Y115.524 E123.0660
G1 X195.440 Y116.985 E123.0903
G1 X76.569 Y116.985 E125.0672
G1 X76.569 Y115.524 E125.0915
G1 X91.082 Y115.524 E125.3328
G0 X92.358 Y115.890 F4800
G1 F2400 X195.047 Y115.890 E127.0405
G1 X195.047 Y116.619 E127.0527
G1 X76.961 Y116.619 E129.0164
G1 X76.961 Y115.890 E129.0286
G1 X92.162 Y115.890 E129.2813
G0 X86.959 Y114.059 F4800
G1 F2400 X197.011 Y114.059 E131.1115
G1 X197.011 Y118.449 E131.1845
G1 X74.997 Y118.449 E133.2136
G1 X74.997 Y114.059 E133.2866
G1 X86.763 Y114.059 E133.4823
G0 X82.640 Y112.595 F4800
G1 F2400 X198.582 Y112.595 E135.4104
G1 X198.582 Y119.914 E135.5322
G1 X73.426 Y119.914 E137.6135
G1 X73.426 Y112.595 E137.7352
G1 X82.443 Y112.595 E137.8852
G0 X80.480 Y111.863 F4800
G1 F2400 X199.368 Y111.862 E139.8623
G1 X199.368 Y120.646 E140.0084
G1 X72.641 Y120.646 E142.1159
G1 X72.641 Y111.863 E142.2619
G1 X80.284 Y111.863 E142.3890
G0 X76.161 Y110.398 F4800
G1 F2400 X200.939 Y110.398 E144.4641
G1 X200.939 Y122.110 E144.6589
G1 X71.070 Y122.110 E146.8186
G1 X71.070 Y110.398 E147.0134
G1 X75.964 Y110.398 E147.0948
G0 X74.001 Y109.666 F4800
G1 F2400 X201.725 Y109.666 E149.2188
G1 X201.725 Y122.842 E149.4380
G1 X70.284 Y122.843 E151.6238
G1 X70.284 Y109.666 E151.8430
G1 X73.805 Y109.666 E151.9015
G0 X72.921 Y109.300 F4800
G1 F2400 X202.117 Y109.300 E154.0501
G1 X202.117 Y123.209 E154.2814
G1 X69.891 Y123.209 E156.4803
G1 X69.891 Y109.300 E156.7116
G1 X72.725 Y109.300 E156.7587
G0 X71.841 Y108.934 F4800
G1 F2400 X202.510 Y108.934 E158.9318
G1 X202.510 Y123.575 E159.1753
G1 X69.498 Y123.575 E161.3872
G1 X69.498 Y108.934 E161.6307
G1 X71.645 Y108.934 E161.6664
G0 X70.762 Y108.568 F4800
G1 F2400 X202.903 Y108.568 E163.8640
G1 X202.903 Y123.941 E164.1196
G1 X69.106 Y123.941 E166.3447
G1 X69.106 Y108.568 E166.6003
G1 X70.565 Y108.568 E166.6246
G0 X69.682 Y108.202 F4800
G1 F2400 X203.296 Y108.201 E168.8466
G1 X203.296 Y124.307 E169.1145
G1 X68.713 Y124.307 E171.3526
G1 X68.713 Y108.202 E171.6204
G1 X69.485 Y108.202 E171.6333
G0 X68.602 Y107.836 F4800
G1 F2400 X203.688 Y107.835 E173.8798
G1 X203.688 Y124.673 E174.1598
G1 X68.320 Y124.673 E176.4110
G1 X68.320 Y107.836 E176.6910
G1 X68.406 Y107.836 E176.6924
G0 X67.927 Y107.847 F4800
G1 F2400 X67.927 Y107.470 E176.6987
G1 X204.081 Y107.469 E178.9629
G1 X204.081 Y125.039 E179.2551
G1 X67.927 Y125.039 E181.5194
G1 X67.927 Y108.030 E181.8022
G0 X67.535 Y108.854 F4800
G1 F2400 X67.535 Y107.103 E181.8314
G1 X204.474 Y107.103 E184.1087
G1 X204.474 Y125.405 E184.4130
G1 X67.535 Y125.405 E186.6903
G1 X67.535 Y109.037 E186.9626
G0 X67.142 Y109.860 F4800
G1 F2400 X67.142 Y106.737 E187.0145
G1 X204.867 Y106.737 E189.3049
G1 X204.867 Y125.771 E189.6214
G1 X67.142 Y125.771 E191.9118
G1 X67.142 Y110.043 E192.1733
G0 X66.749 Y110.867 F4800
G1 F2400 X66.749 Y106.371 E192.2481
G1 X205.260 Y106.371 E194.5515
G1 X205.260 Y126.137 E194.8803
G1 X66.749 Y126.138 E197.1837
G1 X66.749 Y111.050 E197.4346
G0 X66.356 Y111.873 F4800
G1 F2400 X66.356 Y106.005 E197.5322
G1 X205.652 Y106.005 E199.8487
G1 X205.652 Y126.503 E200.1896
G1 X66.356 Y126.504 E202.5061
G1 X66.356 Y112.056 E202.7463
G0 X65.963 Y112.880 F4800
G1 F2400 X65.963 Y105.639 E202.8668
G1 X206.045 Y105.639 E205.1963
G1 X206.045 Y126.870 E205.5494
G1 X65.963 Y126.870 E207.8790
G1 X65.963 Y113.063 E208.1086
G0 X65.571 Y113.886 F4800
G1 F2400 X65.571 Y105.273 E208.2518
G1 X206.438 Y105.273 E210.5945
G1 X206.438 Y127.236 E210.9597
G1 X65.571 Y127.236 E213.3024
G1 X65.571 Y114.069 E213.5213
G0 X65.178 Y114.893 F4800
G1 F2400 X65.178 Y104.907 E213.6874
G1 X206.831 Y104.907 E216.0431
G1 X206.831 Y127.602 E216.4205
G1 X65.178 Y127.602 E218.7762
G1 X65.178 Y115.076 E218.9845
G0 X64.785 Y115.899 F4800
G1 F2400 X64.785 Y104.541 E219.1734
G1 X207.223 Y104.540 E221.5422
G1 X207.223 Y127.968 E221.9318
G1 X64.785 Y127.968 E224.3005
G1 X64.785 Y116.082 E224.4982
G0 X64.392 Y116.905 F4800
G1 F2400 X64.392 Y104.175 E224.7099
G1 X207.616 Y104.174 E227.0917
G1 X207.616 Y128.334 E227.4935
G1 X64.392 Y128.334 E229.8753
G1 X64.392 Y117.088 E230.0623
G0 X64.000 Y117.912 F4800
G1 F2400 X64.000 Y103.808 E230.2969
G1 X208.009 Y103.808 E232.6918
G1 X208.009 Y128.700 E233.1057
G1 X64.000 Y128.700 E235.5006
G1 X64.000 Y118.095 E235.6770
G0 X63.607 Y118.918 F4800
G1 F2400 X63.607 Y103.442 E235.9343
G1 X208.402 Y103.442 E238.3423
G1 X208.402 Y129.066 E238.7684
G1 X63.607 Y129.066 E241.1763
G1 X63.607 Y119.101 E241.3421
G0 X62.036 Y122.944 F4800
G1 F2400 X62.036 Y101.978 E241.6907
G1 X209.973 Y101.978 E244.1510
G1 X209.973 Y130.531 E244.6258
G1 X62.036 Y130.531 E247.0860
G1 X62.036 Y123.127 E247.2091
G0 X61.250 Y124.957 F4800
G1 F2400 X61.250 Y101.246 E247.6034
G1 X210.758 Y101.246 E250.0898
G1 X210.758 Y131.263 E250.5890
G1 X61.250 Y131.263 E253.0753
G1 X61.250 Y125.140 E253.1771
G0 X60.465 Y126.970 F4800
G1 F2400 X60.465 Y100.514 E253.6171
G1 X211.544 Y100.513 E256.1295
G1 X211.544 Y131.995 E256.6531
G1 X60.465 Y131.995 E259.1655
G1 X60.465 Y127.153 E259.2460
; ------------------------------------
; Layer #2
; ------------------------------------
....... Alle anderen Layer .......

(******* End.gcode*******)
M73 P100 ( End  build progress )
G0 Z150 ( Send Z axis to bottom of machine )
M18 ( Disable steppers )
M109 S0 T0 ( Cool down the build platform )
M104 S0 T0 ( Cool down the Right Extruder )
M104 S0 T1 ( Cool down the Left Extruder )
G162 X Y F2500 ( Home XY endstops )
M18 ( Disable stepper motors )
M70 P5 ( We <3 Making Things!)
M72 P1  ( Play Ta-Da song )
(*********end End.gcode*******)
(******* End.gcode*******)
M73 P100 ( End  build progress )
G0 Z150 ( Send Z axis to bottom of machine )
M18 ( Disable steppers )
M109 S0 T0 ( Cool down the build platform )
M104 S0 T0 ( Cool down the Right Extruder )
M104 S0 T1 ( Cool down the Left Extruder )
G162 X Y F2500 ( Home XY endstops )
M18 ( Disable stepper motors )
M70 P5 ( We <3 Making Things!)
M72 P1  ( Play Ta-Da song )
(*********end End.gcode*******)
(******* End.gcode*******)
M73 P100 ( End  build progress )
G0 Z150 ( Send Z axis to bottom of machine )
M18 ( Disable steppers )
M109 S0 T0 ( Cool down the build platform )
M104 S0 T0 ( Cool down the Right Extruder )
M104 S0 T1 ( Cool down the Left Extruder )
G162 X Y F2500 ( Home XY endstops )
M18 ( Disable stepper motors )
M70 P5 ( We <3 Making Things!)
M72 P1  ( Play Ta-Da song )
(*********end End.gcode*******)
(******* End.gcode*******)
M73 P100 ( End  build progress )
G0 Z150 ( Send Z axis to bottom of machine )
M18 ( Disable steppers )
M109 S0 T0 ( Cool down the build platform )
M104 S0 T0 ( Cool down the Right Extruder )
M104 S0 T1 ( Cool down the Left Extruder )
G162 X Y F2500 ( Home XY endstops )
M18 ( Disable stepper motors )
M70 P5 ( We <3 Making Things!)
M72 P1  ( Play Ta-Da song )
(*********end End.gcode*******)