API tools faq
paste
Guest User

dmesg

a guest
Sep 19th, 2012
194
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.21 KB | None | 0 0
raw download clone embed print report
  1. Initializing cgroup subsys cpu
  2. Linux version 3.0.35-1968-gd3f7f36 (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1-2012.08-20120827 - Linaro GCC 2012.08) ) #11 SMP PREEMPT Tue Sep 18 17:08:35 CEST 2012
  3. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  4. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. Machine: Freescale i.MX 6Quad Sabre-Lite Board
  6. Memory policy: ECC disabled, Data cache writealloc
  7. CPU identified as i.MX6Q, silicon rev 1.0
  8. On node 0 totalpages: 229376
  9. free_area_init_node: node 0, pgdat 80722180, node_mem_map 8b800000
  10. DMA zone: 368 pages used for memmap
  11. DMA zone: 0 pages reserved
  12. DMA zone: 46736 pages, LIFO batch:15
  13. Normal zone: 1680 pages used for memmap
  14. Normal zone: 180592 pages, LIFO batch:31
  15. PERCPU: Embedded 7 pages/cpu @8c008000 s5568 r8192 d14912 u32768
  16. pcpu-alloc: s5568 r8192 d14912 u32768 alloc=8*4096
  17. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  18. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227328
  19. Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p2 rootfs=ext3 rootwait rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24 video=mxcdi1fb:off
  20. PID hash table entries: 4096 (order: 2, 16384 bytes)
  21. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. allocated 4194304 bytes of page_cgroup
  24. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  25. Memory: 640MB 256MB = 896MB total
  26. Memory: 888944k/888944k available, 159632k reserved, 0K highmem
  27. Virtual kernel memory layout:
  28. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  30. DMA : 0xf4600000 - 0xffe00000 ( 184 MB)
  31. vmalloc : 0xc0800000 - 0xf2000000 ( 792 MB)
  32. lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  33. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  34. modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  35. .init : 0x80008000 - 0x80039000 ( 196 kB)
  36. .text : 0x80039000 - 0x806d1f68 (6756 kB)
  37. .data : 0x806d2000 - 0x807232c0 ( 325 kB)
  38. .bss : 0x807232e4 - 0x8076f434 ( 305 kB)
  39. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  40. Preemptible hierarchical RCU implementation.
  41. NR_IRQS:496
  42. MXC GPIO hardware
  43. sched_clock: 32 bits at 6MHz, resolution 166ns, wraps every 715827ms
  44. MXC_Early serial console at MMIO 0x21e8000 (options '115200')
  45. bootconsole [ttymxc1] enabled
  46. Console: colour dummy device 80x30
  47. Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  48. pid_max: default: 32768 minimum: 301
  49. Mount-cache hash table entries: 512
  50. Initializing cgroup subsys cpuacct
  51. Initializing cgroup subsys memory
  52. Initializing cgroup subsys devices
  53. Initializing cgroup subsys freezer
  54. Initializing cgroup subsys blkio
  55. Initializing cgroup subsys perf_event
  56. CPU: Testing write buffer coherency: ok
  57. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  58. CPU1: Booted secondary processor
  59. CPU2: Booted secondary processor
  60. CPU3: Booted secondary processor
  61. Brought up 4 CPUs
  62. SMP: Total of 4 processors activated (6324.22 BogoMIPS).
  63. devtmpfs: initialized
  64. print_constraints: dummy:
  65. NET: Registered protocol family 16
  66. print_constraints: vddpu: 725 <--> 1300 mV at 1100 mV fast normal
  67. print_constraints: vddcore: 725 <--> 1300 mV at 1100 mV fast normal
  68. print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
  69. print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  70. print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  71. print_constraints: vdd3p0: 2800 <--> 3150 mV at 3000 mV fast normal
  72. ------------ Board type Nitrogen6X/W
  73. hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  74. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  75. hw-breakpoint: maximum watchpoint size is 4 bytes.
  76. L310 cache controller enabled
  77. l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
  78. IMX usb wakeup probe
  79. the wakeup pdata is 0xbfe56b40
  80. bio: create slab <bio-0> at 0
  81. print_constraints: vmmc: 3300 mV
  82. print_constraints: VDD_1.8V: 1800 mV
  83. vgaarb: loaded
  84. SCSI subsystem initialized
  85. libata version 3.00 loaded.
  86. spi_imx imx6q-ecspi.0: probed
  87. usbcore: registered new interface driver usbfs
  88. usbcore: registered new interface driver hub
  89. usbcore: registered new device driver usb
  90. Freescale USB OTG Driver loaded, $Revision: 1.55 $
  91. add wake up source irq 75
  92. imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  93. imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  94. mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed
  95. mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a
  96. MIPI CSI2 driver module loaded
  97. cfg80211: Calling CRDA to update world regulatory domain
  98. i2c-core: driver [max17135] using legacy suspend method
  99. i2c-core: driver [max17135] using legacy resume method
  100. Switching to clocksource mxc_timer1
  101. NET: Registered protocol family 2
  102. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  103. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  104. TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  105. TCP: Hash tables configured (established 131072 bind 65536)
  106. TCP reno registered
  107. UDP hash table entries: 512 (order: 2, 16384 bytes)
  108. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  109. NET: Registered protocol family 1
  110. RPC: Registered named UNIX socket transport module.
  111. RPC: Registered udp transport module.
  112. RPC: Registered tcp transport module.
  113. RPC: Registered tcp NFSv4.1 backchannel transport module.
  114. PCI: CLS 0 bytes, default 32
  115. Unpacking initramfs...
  116. Freeing initrd memory: 7704K
  117. Static Power Management for Freescale i.MX6
  118. wait mode is enabled for i.MX6
  119. cpaddr = c0880000 suspend_iram_base=c08fc000
  120. PM driver module loaded
  121. IMX PCIe port: link down!
  122. IMX usb wakeup probe
  123. the wakeup pdata is 0xbfea14c0
  124. i.MXC CPU frequency driver
  125. JFFS2 version 2.2. (NAND) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
  126. msgmni has been set to 1751
  127. alg: No test for stdrng (krng)
  128. io scheduler noop registered
  129. io scheduler deadline registered
  130. io scheduler cfq registered (default)
  131. MIPI DSI driver module loaded
  132. mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  133. mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  134. fbcvt: 1280x720@60: CVT Name - .921M9
  135. imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  136. Console: switching to colour frame buffer device 160x45
  137. mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver lcd
  138. mxc_sdc_fb mxc_sdc_fb.2: register mxc display driver ldb
  139. _regulator_get: get() with no identifier
  140. mxc_sdc_fb mxc_sdc_fb.3: register mxc display driver ldb
  141. imx-sdma imx-sdma: loaded firmware 1.1
  142. imx-sdma imx-sdma: initialized
  143. Serial: IMX driver
  144. imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  145. imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  146. old_ufcr=a81 new_ufcr=b01, old_ucr2=4027 new_ucr2=4027, old_ubir=f num=1f7, old_ubmr=15b denom=c34
  147. clk=80000000 div=7 num=504 denom=3125 baud=115200
  148. console [ttymxc1] enabled, bootconsole disabled
  149. imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  150. [drm] Initialized drm 1.1.0 20060810
  151. [drm] Initialized vivante 1.0.0 20120216 on minor 0
  152. loop: module loaded
  153. Can't recover from RESET HBA!
  154. No sata disk.
  155. m25p80 spi0.0: sst25vf016b (2048 Kbytes)
  156. Creating 3 MTD partitions on "m25p80":
  157. 0x000000000000-0x0000000c0000 : "bootloader"
  158. 0x0000000c0000-0x0000000c2000 : "ubparams"
  159. 0x0000000c2000-0x000000200000 : "unused"
  160. FEC Ethernet Driver
  161. fec_enet_mii_bus: probed
  162. tun: Universal TUN/TAP device driver, 1.6
  163. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  164. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  165. fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  166. fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  167. fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  168. fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  169. hub 1-0:1.0: USB hub found
  170. hub 1-0:1.0: 1 port detected
  171. add wake up source irq 72
  172. fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  173. fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  174. fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  175. fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  176. hub 2-0:1.0: USB hub found
  177. hub 2-0:1.0: 1 port detected
  178. usbcore: registered new interface driver cdc_acm
  179. cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  180. Initializing USB Mass Storage driver...
  181. usbcore: registered new interface driver usb-storage
  182. USB Mass Storage support registered.
  183. usbcore: registered new interface driver usbserial
  184. usbserial: USB Serial Driver core
  185. USB Serial support registered for GSM modem (1-port)
  186. usbcore: registered new interface driver option
  187. option: v0.7.2:USB Driver for GSM modems
  188. USB Serial support registered for Qualcomm USB modem
  189. usbcore: registered new interface driver qcserial
  190. ARC USBOTG Device Controller driver (1 August 2005)
  191. mousedev: PS/2 mouse device common for all mice
  192. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  193. tsc2004_prepare_for_reading: write_cmd -5
  194. tsc2004: probe of 2-0048 failed with error -5
  195. egalax_ts 2-0004: egalax_ts: failed to read firmware version
  196. egalax_ts: probe of 2-0004 failed with error -5
  197. ts_probe: ft5x06 touchscreen irq=265, gp=9
  198. input: ft5x06 as /devices/virtual/input/input1
  199. ft5x06: Sep 18 2012
  200. i2c-core: driver [isl29023] using legacy suspend method
  201. i2c-core: driver [isl29023] using legacy resume method
  202. snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  203. i2c /dev entries driver
  204. Linux video capture interface: v2.00
  205. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  206. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  207. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
  208. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video19
  209. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video20
  210. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video21
  211. i2c-core: driver [mag3110] using legacy suspend method
  212. i2c-core: driver [mag3110] using legacy resume method
  213. imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  214. device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  215. sdhci: Secure Digital Host Controller Interface driver
  216. sdhci: Copyright(c) Pierre Ossman
  217. sdhci sdhci-esdhc-imx.2: no write-protect pin available!
  218. mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
  219. sdhci sdhci-esdhc-imx.3: no write-protect pin available!
  220. mmc1: SDHCI controller on platform [sdhci-esdhc-imx.3] using DMA
  221. mmc2: SDHCI controller on platform [sdhci-esdhc-imx.1] using DMA
  222. mmc0: host does not support reading read-only switch. assuming write-enable.
  223. mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  224. mmc0: new high speed SDHC card at address 1234
  225. mmcblk0: mmc0:1234 SA04G 3.67 GiB
  226. mmcblk0: p1 p2
  227. VPU initialized
  228. usb 2-1: new high speed USB device number 2 using fsl-ehci
  229. mxc_asrc registered
  230. Thermal calibration data is 0x58e5523a
  231. anatop_thermal_counting_ratio: raw25c=1422 raw_hot=1362 hot_temp=58
  232. Anatop Thermal registered as thermal_zone0
  233. anatop_thermal_probe: default cooling device is cpufreq!
  234. HDMI CEC initialized
  235. hub 2-1:1.0: USB hub found
  236. hub 2-1:1.0: 3 ports detected
  237. caam caam.0: device ID = 0x0a16010000000000
  238. caam caam.0: job rings = 2, qi = 0
  239. alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
  240. caam caam.0: authenc-hmac-md5-cbc-aes-caam
  241. alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam)
  242. caam caam.0: authenc-hmac-sha1-cbc-aes-caam
  243. alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
  244. caam caam.0: authenc-hmac-sha224-cbc-aes-caam
  245. alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam)
  246. caam caam.0: authenc-hmac-sha256-cbc-aes-caam
  247. alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
  248. caam caam.0: authenc-hmac-md5-cbc-des3_ede-caam
  249. alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-des3_ede-caam)
  250. caam caam.0: authenc-hmac-sha1-cbc-des3_ede-caam
  251. alg: No test for authenc(hmac(sha224),cbc(des3_ede)) (authenc-hmac-sha224-cbc-des3_ede-caam)
  252. caam caam.0: authenc-hmac-sha224-cbc-des3_ede-caam
  253. alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-des3_ede-caam)
  254. caam caam.0: authenc-hmac-sha256-cbc-des3_ede-caam
  255. alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
  256. caam caam.0: authenc-hmac-md5-cbc-des-caam
  257. alg: No test for authenc(hmac(sha1),cbc(des)) (authenc-hmac-sha1-cbc-des-caam)
  258. caam caam.0: authenc-hmac-sha1-cbc-des-caam
  259. alg: No test for authenc(hmac(sha224),cbc(des)) (authenc-hmac-sha224-cbc-des-caam)
  260. caam caam.0: authenc-hmac-sha224-cbc-des-caam
  261. alg: No test for authenc(hmac(sha256),cbc(des)) (authenc-hmac-sha256-cbc-des-caam)
  262. caam caam.0: authenc-hmac-sha256-cbc-des-caam
  263. caam caam.0: cbc-aes-caam
  264. caam caam.0: cbc-3des-caam
  265. caam caam.0: cbc-des-caam
  266. platform caam_jr.0: registering rng-caam
  267. usbcore: registered new interface driver usbhid
  268. usbhid: USB HID core driver
  269. NET: Registered protocol family 26
  270. TCP cubic registered
  271. NET: Registered protocol family 17
  272. lib80211: common routines for IEEE802.11 drivers
  273. lib80211_crypt: registered algorithm 'NULL'
  274. lib80211_crypt: registered algorithm 'WEP'
  275. lib80211_crypt: registered algorithm 'CCMP'
  276. lib80211_crypt: registered algorithm 'TKIP'
  277. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  278. Bus freq driver module loaded
  279. Bus freq driver Enabled
  280. mxc_dvfs_core_probe
  281. DVFS driver module loaded
  282. regulator_init_complete: vddpu: incomplete constraints, leaving on
  283. snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:02:30 UTC (150)
  284. Freeing init memory: 196K
  285. usb 2-1.2: new low speed USB device number 3 using fsl-ehci
  286. USB Host suspend begins
  287. will suspend roothub and its children
  288. ehci_fsl_bus_suspend begins, DR
  289. ehci_fsl_bus_suspend ends, DR
  290. host suspend ends
  291. dracut: dracut-018-53.git20120605.fc17
  292. input: Dell Dell USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
  293. generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-fsl-ehci.1-1.2/input0
  294. udevd[1383]: starting version 182
  295. EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  296. EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  297. EXT4-fs (mmcblk0p2): recovery complete
  298. EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  299. dracut: Checking ext4: /dev/mmcblk0p2
  300. dracut: issuing e2fsck -a /dev/mmcblk0p2
  301. dracut: rootfs: clean, 96858/208416 files, 647852/833371 blocks
  302. dracut: Remounting /dev/mmcblk0p2 with -o rw
  303. EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  304. dracut: Mounted root filesystem /dev/mmcblk0p2
  305. dracut: Switching root
  306. udevd[2514]: starting version 182
  307. camera_sensor_clock: disagrees about version of symbol module_layout
  308. scsi_wait_scan: disagrees about version of symbol module_layout
  309. EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  310. eth0: Freescale FEC PHY driver [Micrel KSZ9021 Gigabit PHY] (mii_bus:phy_addr=1:06, irq=284)
  311. write_reg: i2c_transfer failed
  312. set_mode: changed mode to 0x00
  313. write_reg: i2c_transfer failed
  314. set_mode: changed mode to 0x00
  315. ft5x06: i2c_transfer failed
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!