/dev/sdc:
SG_IO: bad/missing sense data, sb[]:  70 00 05 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

CompactFlash ATA device
	Model Number:       �Eo��ز��/]ѩ�(pI���� 7>�_��v�6
	Serial Number:      A��M|J��R�K�d��S�m
	Firmware Revision:  �\ϓ���
	Media Serial Num:   �����pc)�(�G���a�S
                                              �i���C�6&�gGd���
	Media Manufacturer: �-�b�t��#��.q��
	Transport:          0x31d0; Revision: 0x5246
Standards:
	Used: unknown (minor revision code 0xc8ca)
	Supported: 11 10 9 6 5
	Likely used: 11
Configuration:
	Logical		max	current
	cylinders	23573	63536
	heads		8454	24345
	sectors/track	58975	24062
	--
	CHS current addressable sectors: 2571074325
	LBA    user addressable sectors: 2136313722
	Logical/Physical Sector size:           512 bytes
	device size with M = 1024*1024:     1255407 MBytes
	device size with M = 1000*1000:     1316390 MBytes (1316 GB)
	cache/buffer size  = unknown
	Nominal Media Rotation Rate: 49340
Capabilities:
	LBA, IORDY(may be)(can be disabled)
	Queue depth: 15
	Standby timer values: spec'd by Vendor
	R/W multiple sector transfer: Max = 169	Current = 151
	Recommended acoustic management value: 87, current value: 117
	DMA: mdma0 *mdma1 *mdma2 *mdma3 mdma4 mdma5 *mdma6 mdma7 (?)
	PIO: unknown
Commands/features:
	Enabled	Supported:
	   *	Removable Media feature set
	    	Write cache
	   *	Look-ahead
	    	Release interrupt
	    	DEVICE_RESET command
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	CFA feature set
	    	Power-Up In Standby feature set
	    	SET_MAX security extension
	   *	Device Configuration Overlay feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	unknown 76[0]
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	unknown 76[4]
	   *	unknown 76[7]
	   *	Native Command Queueing (NCQ)
	   *	Host-initiated interface power management
	   *	Phy event counters
	   *	Idle-Unload when NCQ is active
	   *	DMA Setup Auto-Activate optimization
	   *	Device-initiated interface power management
	   *	Asynchronous notification (eg. media change)
	   *	Software settings preservation
	   *	unknown 78[9]
	   *	unknown 78[12]
	   *	reserved 69[4]
	   *	reserved 69[6]
	   *	reserved 69[7]
	   *	DOWNLOAD MICROCODE DMA command
	   *	DEVICE CONFIGURATION SET/IDENTIFY DMA commands
		CFA max advanced io_udma cycle time: 80ns
		CFA max advanced mem_udma cycle time: 80ns
	   *	CFA advanced modes: pio5 io_udma4 io_udma5 io_udma6 io_udma7 io_udma8 io_udma9 mem_udma4 mem_udma5 mem_udma6 mem_udma7 mem_udma8 mem_udma9 *mem_udma10
	   *	CFA Power Level 1  (max 1287mA)
		Removable Media Status Notification feature set supported
Security:
	Master password revision code = 33262
	not	supported
		enabled
		locked
		frozen
		expired: security count
		supported: enhanced erase
	Security level maximum
HW reset results:
	CBLID- below Vih
	Device num = 1
Integrity word not set (found 0x5a35, expected 0x45a5)