API tools faq
paste
Guest User

last_kmsg

a guest
Sep 7th, 2013
101
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.72 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 3.4.0-franco.Kernel-nightly (francisco@francisco) (gcc version 4.7 (GCC) ) #182 SMP PREEMPT Tue Sep 3 17:18:27 WEST 2013
  4. [ 0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.0000androidbootPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] Machine: QCT APQ8064 MAKO
  7. [ 0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
  8. [ 0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  9. [ 0.000000] Initialized persistent memory from 88700000-887fffff
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] smem_find(137, 80): wrong size 72
  12. [ 0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  13. [ 0.000000] accessory_chip=0 hw_plat_subtype=1
  14. [ 0.000000] allocating 21626880 bytes at c22db000 (824db000 physical) for fb
  15. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c377e000 s11392 r8192 d13184 u32768
  16. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 488963
  17. [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=rst_none gpt=enable lge.kcal=0|0|0|x lge.rev=rev_10 androidboot.emmc=true androidboot.serialno=0038d2958f91371e androidboot.bootloader=MAKOZ20i androidboot.mode=charger androidboot.baseband=mdm bootreason=hw_reset_or_poweron
  18. [ 0.000000] UART CONSOLE : enable
  19. [ 0.000000] kcal is 0|0|0|x
  20. [ 0.000000] kcal not calibrated yet : 120
  21. [ 0.000000] set to default : 255
  22. [ 0.000000] BOARD : LGE input rev_10
  23. [ 0.000000] BOARD : LGE matched rev_10
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
  28. [ 0.000000] Memory: 1914828k/1997772k available, 57392k reserved, 1286140K highmem
  29. [ 0.000000] Virtual kernel memory layout:
  30. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  31. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  32. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  33. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  34. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  35. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  36. [ 0.000000] .text : 0xc0008000 - 0xc0be9000 (12164 kB)
  37. [ 0.000000] .init : 0xc0c00000 - 0xc0d02c80 (1036 kB)
  38. [ 0.000000] .data : 0xc0d04000 - 0xc0d6abc0 ( 411 kB)
  39. [ 0.000000] .bss : 0xc0e28460 - 0xc10d17dc (2725 kB)
  40. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] Preemptible hierarchical RCU implementation.
  42. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  43. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
  44. [ 0.000000] NR_IRQS:921
  45. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  46. [ 0.000000] Console: colour dummy device 80x30
  47. [ 0.000152] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
  48. [ 0.000183] pid_max: default: 32768 minimum: 301
  49. [ 0.000427] Security Framework initialized
  50. [ 0.000457] SELinux: Initializing.
  51. [ 0.000610] Mount-cache hash table entries: 512
  52. [ 0.001831] Initializing cgroup subsys cpuacct
  53. [ 0.001861] Initializing cgroup subsys freezer
  54. [ 0.001953] CPU: Testing write buffer coherency: ok
  55. [ 0.002258] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  56. [ 0.002289] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  57. [ 0.002380] Setting up static identity map for 0x80af6088 - 0x80af6110
  58. [ 0.006195] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  59. [ 0.008881] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  60. [ 0.011597] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  61. [ 0.011719] Brought up 4 CPUs
  62. [ 0.011750] SMP: Total of 4 processors activated (54.14 BogoMIPS).
  63. [ 0.028963] dummy:
  64. [ 0.029787] NET: Registered protocol family 16
  65. [ 0.031558] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  66. [ 0.035647] meminfo_init: smem ram ptable found: ver: 0 len: 6
  67. [ 0.035678] Found 2 memory banks grouped into 16 memory regions
  68. [ 0.036014] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  69. [ 0.037021] smem_find(137, 80): wrong size 72
  70. [ 0.037082] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8, hw_plat_ver=65536
  71. [ 0.037082] accessory_chip=0 hw_plat_subtype=1
  72. [ 0.037143] msm_rpm_init: RPM firmware 3.0.16842886
  73. [ 0.058141] msm_rpm_get_status(): Status id 433 not defined for target
  74. [ 0.058171] msm_rpm_get_status(): Status id 433 not defined for target
  75. [ 0.058171] msm_rpm_get_status(): Status id 433 not defined for target
  76. [ 0.058202] msm_rpm_get_status(): Status id 433 not defined for target
  77. [ 0.058202] msm_rpm_get_status(): Status id 433 not defined for target
  78. [ 0.058232] msm_rpm_get_status(): Status id 433 not defined for target
  79. [ 0.058232] msm_rpm_get_status(): Status id 433 not defined for target
  80. [ 0.058232] msm_rpm_get_status(): Status id 433 not defined for target
  81. [ 0.077338] pm8921_probe: PMIC revision 1: F4
  82. [ 0.077369] pm8921_probe: PMIC revision 2: 06
  83. [ 0.077369] pm8921_probe: PMIC version: PM8921 rev 3.0
  84. [ 0.077399] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
  85. [ 0.078620] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  86. [ 0.079139] pm_gpio_probe: OK: base=152, ngpio=44
  87. [ 0.079444] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  88. [ 0.079536] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  89. [ 0.081794] pm8821_probe: PMIC revision 1: PM8821 rev F3
  90. [ 0.081825] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  91. [ 0.081825] pm8821_probe: PMIC version: PM8821 ver 2.1
  92. [ 0.082435] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  93. [ 0.082496] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  94. [ 0.083045] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
  95. [ 0.084327] saw_probe: id=0, name=8921_s5
  96. [ 0.084724] saw_probe: id=1, name=8921_s6
  97. [ 0.085090] saw_probe: id=2, name=8821_s0
  98. [ 0.085457] saw_probe: id=3, name=8821_s1
  99. [ 0.094521] persistent_ram: uncorrectable error in header
  100. [ 0.094552] persistent_ram: no valid data in buffer (sig = 0xc0c0c0c0)
  101. [ 0.105020] console [ram-1] enabled
  102. [ 0.106424] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
  103. [ 0.106577] [DEBUG] uart_enable : 1
  104. [ 0.109232] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver
  105. [ 0.112955] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  106. [ 0.113047] sps:BAM 0x12244000 is registered.
  107. [ 0.113657] sps:sps is ready.
  108. [ 0.145521] bio: create slab <bio-0> at 0
  109. [ 0.146223] ION heap vmalloc created
  110. [ 0.146406] ION heap mm created at a0000000 with size 3800000
  111. [ 0.146528] ION heap mm_fw created at 9fe00000 with size 1e0000
  112. [ 0.146680] ION heap mfc created at a3800000 with size 2000
  113. [ 0.146802] ION heap iommu created
  114. [ 0.146986] ION heap qsecom created at fea08000 with size 780000
  115. [ 0.147108] ION heap audio created at ff188000 with size 4cf000
  116. [ 0.148542] pm8xxx_pwm_probe: OK
  117. [ 0.149275] SCSI subsystem initialized
  118. [ 0.149702] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  119. [ 0.149855] sps:BAM 0x28084000 is registered.
  120. [ 0.150770] usbcore: registered new interface driver usbfs
  121. [ 0.151075] usbcore: registered new interface driver hub
  122. [ 0.151289] usbcore: registered new device driver usb
  123. [ 0.151808] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
  124. [ 0.152510] using input dev pmic8xxx_pwrkey for key reset
  125. [ 0.152876] Linux media interface: v0.10
  126. [ 0.152998] Linux video capture interface: v2.00
  127. [ 0.155318] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  128. [ 0.155501] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  129. [ 0.155775] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  130. [ 0.155989] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  131. [ 0.156264] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  132. [ 0.156538] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  133. [ 0.156752] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  134. [ 0.156996] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  135. [ 0.157271] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  136. [ 0.157485] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  137. [ 0.157759] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  138. [ 0.158034] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  139. [ 0.158553] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  140. [ 0.158828] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  141. [ 0.159072] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  142. [ 0.159407] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  143. [ 0.159713] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  144. [ 0.159957] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  145. [ 0.160292] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  146. [ 0.160506] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  147. [ 0.160811] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  148. [ 0.161117] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  149. [ 0.161391] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  150. [ 0.161696] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  151. [ 0.161941] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  152. [ 0.162276] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  153. [ 0.162612] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  154. [ 0.162917] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  155. [ 0.163283] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  156. [ 0.163589] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  157. [ 0.163802] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  158. [ 0.164169] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  159. [ 0.164474] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  160. [ 0.164779] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  161. [ 0.165054] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  162. [ 0.165267] Advanced Linux Sound Architecture Driver Version 1.0.25.
  163. [ 0.165969] Bluetooth: Core ver 2.16
  164. [ 0.166122] NET: Registered protocol family 31
  165. [ 0.166213] Bluetooth: HCI device and connection manager initialized
  166. [ 0.166274] Bluetooth: HCI socket layer initialized
  167. [ 0.166366] Bluetooth: L2CAP socket layer initialized
  168. [ 0.166793] Bluetooth: SCO socket layer initialized
  169. [ 0.167160] cfg80211: Calling CRDA to update world regulatory domain
  170. [ 0.167343] cfg80211: World regulatory domain updated:
  171. [ 0.167434] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  172. [ 0.167587] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  173. [ 0.167739] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  174. [ 0.167831] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  175. [ 0.167984] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  176. [ 0.168136] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  177. [ 0.168930] earjack debugger probed
  178. [ 0.169876] Switching to clocksource gp_timer
  179. [ 0.176468] NET: Registered protocol family 2
  180. [ 0.176865] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  181. [ 0.177537] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  182. [ 0.178879] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  183. [ 0.179551] TCP: Hash tables configured (established 131072 bind 65536)
  184. [ 0.179703] TCP: reno registered
  185. [ 0.179795] UDP hash table entries: 512 (order: 2, 16384 bytes)
  186. [ 0.179948] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  187. [ 0.180466] NET: Registered protocol family 1
  188. [ 0.180955] Trying to unpack rootfs image as initramfs...
  189. [ 0.240195] Freeing initrd memory: 872K
  190. [ 0.242453] Detected 5 counters on the L2CC PMU.
  191. [ 0.244712] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  192. [ 0.246787] pil_riva pil_riva: using secure boot
  193. [ 0.250419] pil_dsps pil_dsps: using secure boot
  194. [ 0.252128] pil_gss pil_gss: using secure boot
  195. [ 0.254539] smd_channel_probe_worker: allocation table not initialized
  196. [ 0.260705] msm_dsps driver version 4.03.
  197. [ 0.262322] NET: Registered protocol family 27
  198. [ 0.265344] lpass_fatal_init: lpass SSR driver init'ed.
  199. [ 0.265557] wcnss_8960: module initialized
  200. [ 0.265954] gss_8064_init: gss fatal driver init'ed.
  201. [ 0.266595] acpuclk-8064 acpuclk-8064: SPEED BIN: 0
  202. [ 0.266748] acpuclk-8064 acpuclk-8064: ACPU PVS: FASTEST
  203. [ 0.269342] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
  204. [ 0.269494] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
  205. [ 0.269586] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
  206. [ 0.269739] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
  207. [ 0.270410] kcal_ctrl_init
  208. [ 0.271051] persistent_ram: no valid data in buffer (sig = 0xc0c0c0c0)
  209. [ 0.272119] msm_rpm_log_probe: OK
  210. [ 0.275019] usbcore: registered new interface driver hsic_sysmon
  211. [ 0.275507] audit: initializing netlink socket (disabled)
  212. [ 0.275690] type=2000 audit(0.260:1): initialized
  213. [ 0.277369] highmem bounce pool size: 64 pages
  214. [ 0.291103] fuse init (API version 7.18)
  215. [ 0.291957] msgmni has been set to 1229
  216. [ 0.297176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  217. [ 0.297482] io scheduler noop registered
  218. [ 0.297665] io scheduler deadline registered
  219. [ 0.297848] io scheduler row registered (default)
  220. [ 0.298458] io scheduler cfq registered
  221. [ 0.299526] lm3530 probed
  222. [ 0.304074] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  223. [ 0.304410] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00fc000
  224. [ 0.305814] mipi_lgit_lcd_probe start
  225. [ 0.305997] setting pdata->panel_info.fb_num to 3. type: 8
  226. [ 0.318449] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
  227. [ 0.318815] load_565rle_image: Can not open /initlogo.rle
  228. [ 0.320830] setting pdata->panel_info.fb_num to 1. type: 7
  229. [ 0.322417] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  230. [ 0.322905] load_565rle_image: Can not open /initlogo.rle
  231. [ 0.323760] mdp4_dtv_vsync_init: ndx=0
  232. [ 0.324248] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf87f408
  233. [ 0.324584] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  234. [ 0.325988] setting pdata->panel_info.fb_num to 1. type: 10
  235. [ 0.326476] Inside writeback_driver_init
  236. [ 0.327208] Inside writeback_probe
  237. [ 0.328765] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
  238. [ 0.329284] load_565rle_image: Can not open /initlogo.rle
  239. [ 0.332092]
  240. [ 0.332092] msm_vidc_enc: Inside vid_enc_init()
  241. [ 0.332946]
  242. [ 0.332977] msm_vidc_enc: Inside vid_enc_vcd_init()
  243. [ 0.334442] smux_init: unable to create log context
  244. [ 0.336029] msm_serial_hs module loaded
  245. [ 0.336609] msm_serial_hsl: detected port #0
  246. [ 0.337005] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
  247. [ 0.337402] msm_serial_hsl: console setup on port #0
  248. [ 0.338013] console [ttyHSL0] enabled
  249. [ 0.338776] msm_serial_hsl: driver initialized
  250. [ 0.341156] msm_rotator_probe: rotator_hw_revision=2
  251. [ 0.344941] diagchar initialized now
  252. [ 0.346955] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  253. [ 0.364352] brd: module loaded
  254. [ 0.372714] loop: module loaded
  255. [ 0.375736] anx7808 init gpio
  256. [ 0.410285] anx7808 dvdd is already on
  257. [ 0.440317] sp_tx_hardware_poweron: anx7808 power on
  258. [ 0.441233] sp_tx_chip_located: ANX7808 BA is found.
  259. [ 0.442606] sp_tx_vbus_powerdown: 3.3V output disabled
  260. [ 0.500656] sp_tx_hardware_powerdown: anx7808 power down
  261. [ 0.500747] sp_tx_set_sys_state: SP_TX To System State:
  262. [ 0.500900] sp_tx_set_sys_state: STATE_CABLE_PLUG
  263. [ 0.501754] tabla2x-slim tabla2x-slim: Platform data from board file
  264. [ 0.567556] wcd9xxx_check_codec_type: codec is tabla_codec
  265. [ 0.567648] wcd9xxx_check_codec_type: Read codec idbytes & version
  266. [ 0.567648] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  267. [ 0.567648] byte_3[00000001] version = 2
  268. [ 0.568960] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  269. [ 0.569052] i2c-core: driver [tabla-i2c-core] using legacy resume method
  270. [ 0.569967] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
  271. [ 0.570303] bcm2079x-i2c 0-a1fa: requesting IRQ 317
  272. [ 0.570517] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
  273. [ 0.571158] SCSI Media Changer driver v0.25
  274. [ 0.572256] tun: Universal TUN/TAP device driver, 1.6
  275. [ 0.572409] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  276. [ 0.572592] rmnet_init: BAM devices[8]
  277. [ 0.586845] PPP generic driver version 2.4.2
  278. [ 0.587150] PPP BSD Compression module registered
  279. [ 0.587242] PPP Deflate Compression module registered
  280. [ 0.589165] PPP MPPE Compression module registered
  281. [ 0.589348] NET: Registered protocol family 24
  282. [ 0.589592] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  283. [ 0.589897] CSLIP: code copyright 1989 Regents of the University of California.
  284. [ 0.590447] wcnss_wlan probed in built-in mode
  285. [ 0.592217] usbcore: registered new interface driver asix
  286. [ 0.592675] usbcore: registered new interface driver cdc_ether
  287. [ 0.592980] usbcore: registered new interface driver net1080
  288. [ 0.593407] usbcore: registered new interface driver cdc_subset
  289. [ 0.593712] usbcore: registered new interface driver zaurus
  290. [ 0.594384] usbcore: registered new interface driver cdc_ncm
  291. [ 0.594719] msm_otg msm_otg: msm_otg probe
  292. [ 0.595086] msm_otg msm_otg: failed to get phy_clk
  293. [ 0.595360] msm_otg msm_otg: OTG regs = f01f6000
  294. [ 0.598779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  295. [ 0.599938] usbcore: registered new interface driver cdc_acm
  296. [ 0.600091] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  297. [ 0.600183] Initializing USB Mass Storage driver...
  298. [ 0.600457] usbcore: registered new interface driver usb-storage
  299. [ 0.600549] USB Mass Storage support registered.
  300. [ 0.600763] usbcore: registered new interface driver ums-alauda
  301. [ 0.600915] usbcore: registered new interface driver ums-cypress
  302. [ 0.601159] usbcore: registered new interface driver ums-datafab
  303. [ 0.601312] usbcore: registered new interface driver ums-freecom
  304. [ 0.601556] usbcore: registered new interface driver ums-isd200
  305. [ 0.601709] usbcore: registered new interface driver ums-jumpshot
  306. [ 0.601953] usbcore: registered new interface driver ums-karma
  307. [ 0.602105] usbcore: registered new interface driver ums-onetouch
  308. [ 0.602350] usbcore: registered new interface driver ums-sddr09
  309. [ 0.602502] usbcore: registered new interface driver ums-sddr55
  310. [ 0.602716] usbcore: registered new interface driver ums-usbat
  311. [ 0.603052] usbcore: registered new interface driver usbserial
  312. [ 0.603143] usbserial: USB Serial Driver core
  313. [ 0.603296] usbcore: registered new interface driver qc_csvt
  314. [ 0.603509] USB Serial support registered for qc_csvt
  315. [ 0.603662] usbcore: registered new interface driver usb_ehset_test
  316. [ 0.603906] usbcore: registered new interface driver diag_bridge
  317. [ 0.604364] usbcore: registered new interface driver mdm_bridge
  318. [ 0.605463] usbcore: registered new interface driver ks_bridge
  319. [ 0.605554] ksb_init: init done
  320. [ 0.605981] msm_otg msm_otg: phy_reset: success
  321. [ 0.606836] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  322. [ 0.607233] mbim_init: initialize 1 instances
  323. [ 0.607416] mbim_init: Initialized 1 ports
  324. [ 0.611048] rndis_qc_init: initialize rndis QC instance
  325. [ 0.611994] android_usb gadget: Mass Storage Function, version: 2009/09/11
  326. [ 0.612177] android_usb gadget: Number of LUNs=1
  327. [ 0.612513] lun0: LUN: removable file: (no medium)
  328. [ 0.613337] android_usb gadget: android_usb ready
  329. [ 0.615931] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
  330. [ 0.617549] [Touch D]touch enable
  331. [ 0.820967] input: touch_dev as /devices/virtual/input/input2
  332. [ 0.843125] [Touch] common[1] finger[17] flash[52] button[0]
  333. [ 0.844315] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E028.
  334. [ 0.846360] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
  335. [ 0.846390] [Touch] Touch driver is initialized
  336. [ 0.846940] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
  337. [ 0.848039] using rtc device, pm8xxx_rtc, for alarms
  338. [ 0.848252] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  339. [ 0.848832] i2c /dev entries driver
  340. [ 0.849443] usbcore: registered new interface driver uvcvideo
  341. [ 0.849595] USB Video Class driver (1.1.1)
  342. [ 0.850999] __jrchoi: msm_sensor_init_module: E
  343. [ 0.879322] msm_eeprom_probe probe_fail
  344. [ 0.879780] msm_server_update_sensor_info mctl_node_name[0] = video1
  345. [ 0.909446] msm_eeprom_probe probe_fail
  346. [ 0.909873] msm_server_update_sensor_info mctl_node_name[1] = video3
  347. [ 0.914451] msm_cam_server_request_irq IRQ Router hw is not present.
  348. [ 0.915183] lm3559_init
  349. [ 0.942102] pm8xxx_tm_probe: OK
  350. [ 0.943293] pm8xxx_tm_probe: OK
  351. [ 0.945002] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
  352. [ 0.946467] cpuidle: using governor ladder
  353. [ 0.946650] cpuidle: using governor menu
  354. [ 0.947474] mmc0: SDCC Version: 0x0000001a
  355. [ 0.949458] mmc0: bam physical base=0x12402000
  356. [ 0.949580] mmc0: bam virtual base=0xf0320000
  357. [ 0.949671] sps:BAM 0x12402000 is registered.
  358. [ 0.949824] mmc0: BAM device registered. bam_handle=0xeef7ea00
  359. [ 0.950160] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  360. [ 0.950770] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  361. [ 0.950984] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  362. [ 0.951197] mmc0: No card detect facilities available
  363. [ 0.953029] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  364. [ 0.953212] mmc0: Controller capabilities: 0x0000039e
  365. [ 0.953364] mmc0: 8 bit data mode enabled
  366. [ 0.953425] mmc0: 4 bit data mode disabled
  367. [ 0.953517] mmc0: polling status mode disabled
  368. [ 0.953700] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  369. [ 0.953792] mmc0: Slot eject status = 0
  370. [ 0.953944] mmc0: Power save feature enable = 1
  371. [ 0.954036] mmc0: SPS-BAM data transfer mode available
  372. [ 0.955012] usbcore: registered new interface driver usbhid
  373. [ 0.955165] usbhid: USB HID core driver
  374. [ 0.956447] ashmem: initialized
  375. [ 0.956813] logger: created 256K log 'log_main'
  376. [ 0.957301] logger: created 256K log 'log_events'
  377. [ 0.957637] logger: created 256K log 'log_radio'
  378. [ 0.958126] logger: created 256K log 'log_system'
  379. [ 0.959438] usbcore: registered new interface driver snd-usb-audio
  380. [ 0.962276] tabla_probe
  381. [ 0.963650] amp_enable: amp enable bypass(2)
  382. [ 0.963863] amp_enable: AMP_EN is set to 0
  383. [ 0.965786] msm_pcm_probe: dev name msm-voip-dsp
  384. [ 0.966488] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  385. [ 0.966824] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  386. [ 0.969052] msm_pcm_probe: dev name msm-pcm-dsp
  387. [ 0.969815] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  388. [ 0.970730] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  389. [ 0.970914] adding pm_qos request in low latency driver
  390. [ 0.971219] done adding pm_qos request in low latency driver
  391. [ 0.973019] msm_compr_probe: dev name msm-compr-dsp
  392. [ 0.974393] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  393. [ 0.976346] msm8930_audio_init: Not the right machine type
  394. [ 0.976651] msm_audio_init: Not the right machine type
  395. [ 0.976835] msm_audio_init: Not APQ8064 in I2S mode
  396. [ 1.075660] mmc0: new HS200 MMC card at address 0001
  397. [ 1.076575] mmcblk0: mmc0:0001 016G92 14.6 GiB
  398. [ 1.082191] Alternate GPT is invalid, using primary GPT.
  399. [ 1.082771] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
  400. [ 1.136273] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  401. [ 1.137189] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  402. [ 1.138074] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  403. [ 1.138867] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  404. [ 1.139691] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  405. [ 1.140454] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  406. [ 1.141339] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  407. [ 1.142041] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  408. [ 1.142865] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  409. [ 1.143720] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  410. [ 1.144544] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  411. [ 1.145399] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  412. [ 1.146223] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  413. [ 1.147108] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  414. [ 1.147932] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  415. [ 1.149336] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  416. [ 1.154249] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  417. [ 1.154982] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  418. [ 1.155653] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  419. [ 1.156355] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  420. [ 1.156996] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  421. [ 1.157698] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  422. [ 1.158339] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  423. [ 1.159041] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  424. [ 1.159713] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  425. [ 1.160445] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  426. [ 1.161147] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  427. [ 1.161849] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  428. [ 1.162643] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  429. [ 1.163283] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  430. [ 1.164199] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  431. [ 1.165267] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  432. [ 1.166366] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  433. [ 1.167190] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  434. [ 1.168289] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  435. [ 1.169143] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  436. [ 1.170181] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  437. [ 1.174179] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  438. [ 1.175125] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  439. [ 1.181992] u32 classifier
  440. [ 1.182176] Actions configured
  441. [ 1.182481] Netfilter messages via NETLINK v0.30.
  442. [ 1.182786] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  443. [ 1.184098] ctnetlink v0.93: registering with nfnetlink.
  444. [ 1.184373] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  445. [ 1.184678] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  446. [ 1.185350] xt_time: kernel timezone is -0000
  447. [ 1.186479] ip_tables: (C) 2000-2006 Netfilter Core Team
  448. [ 1.187303] arp_tables: (C) 2002 David S. Miller
  449. [ 1.187639] TCP: bic registered
  450. [ 1.187944] TCP: cubic registered
  451. [ 1.188127] TCP: westwood registered
  452. [ 1.188280] TCP: highspeed registered
  453. [ 1.188585] TCP: hybla registered
  454. [ 1.188768] TCP: htcp registered
  455. [ 1.188921] TCP: vegas registered
  456. [ 1.189226] TCP: veno registered
  457. [ 1.189409] TCP: scalable registered
  458. [ 1.189592] TCP: lp registered
  459. [ 1.189745] TCP: yeah registered
  460. [ 1.190050] TCP: illinois registered
  461. [ 1.190233] Initializing XFRM netlink socket
  462. [ 1.191545] NET: Registered protocol family 10
  463. [ 1.198809] Mobile IPv6
  464. [ 1.199053] ip6_tables: (C) 2000-2006 Netfilter Core Team
  465. [ 1.199694] IPv6 over IPv4 tunneling driver
  466. [ 1.201403] NET: Registered protocol family 17
  467. [ 1.201648] NET: Registered protocol family 15
  468. [ 1.202289] Bluetooth: RFCOMM TTY layer initialized
  469. [ 1.202502] Bluetooth: RFCOMM socket layer initialized
  470. [ 1.202685] Bluetooth: RFCOMM ver 1.11
  471. [ 1.202990] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  472. [ 1.203174] Bluetooth: BNEP filters: protocol multicast
  473. [ 1.203479] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  474. [ 1.203815] L2TP core driver, V2.0
  475. [ 1.204181] PPPoL2TP kernel driver, V2.0
  476. [ 1.205981] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
  477. [ 1.206500] Mako Hotplug driver started.
  478. [ 1.206928] Registering SWP/SWPB emulation handler
  479. [ 1.207111] clock_late_init: Removing enables held for handed-off clocks
  480. [ 1.218220] MSM Watchdog Initialized
  481. [ 1.228261] registered taskstats version 1
  482. [ 1.228811] mako_hotplug_control_init misc_register(mako_hotplug_control)
  483. [ 1.228933] soundcontrol_init misc_register(soundcontrol)
  484. [ 1.229116] gammacontrol_init misc_register(gammacontrol)
  485. [ 1.229299] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-09-07 08:57:17 UTC (1378544237)
  486. [ 1.230276] read_ocv_trim: program rev reg is 0x4d
  487. [ 1.230367] pm8921_is_usb_chg_plugged_in: called before init
  488. [ 1.232717] pm8921_is_usb_chg_plugged_in: called before init
  489. [ 1.233908] pm8921_is_usb_chg_plugged_in: called before init
  490. [ 1.234060] ocv_ir_compensation: comp ocv = 3185004, ocv = 3183669, ibatt_ua = 6100, rbatt_mohm = 219
  491. [ 1.234274] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
  492. [ 1.234335] pm8921_is_batfet_closed: called before init
  493. [ 1.260766] pm8921_is_usb_chg_plugged_in: called before init
  494. [ 1.260827] adjust_soc: ibat_ua = 139200, vbat_uv = 3214404, soc = 0, batt_temp=387
  495. [ 1.263085] pm8921_get_batt_state: called before init
  496. [ 1.263177] pm8921_bms_probe: OK battery_capacity_at_boot=0 volt = 3269535 ocv = 3654000
  497. [ 1.264245] power_supply usb: driver failed to report `present' property: -22
  498. [ 1.264397] power_supply usb: driver failed to report `present' property: -22
  499. [ 1.264520] power_supply pm8921-dc: driver failed to report `present' property: -22
  500. [ 1.264642] power_supply pm8921-dc: driver failed to report `present' property: -22
  501. [ 1.265954] pm8921_get_batt_state: called before init
  502. [ 1.266015] get_prop_batt_capacity: low battery charge = 0%
  503. [ 1.268304] pm8921_get_batt_state: called before init
  504. [ 1.268365] get_prop_batt_capacity: low battery charge = 0%
  505. [ 1.271936] get_prop_batt_capacity: low battery charge = 0%
  506. [ 1.273157] get_prop_batt_capacity: low battery charge = 0%
  507. [ 1.275812] wlc: bq51051b_wlc_probe: probe
  508. [ 1.275873] wlc: bq51051b_wlc_hw_init: hw_init
  509. [ 1.276087] power_supply wireless: driver failed to report `present' property: -22
  510. [ 1.276361] [Touch] CHARGER = 1
  511. [ 1.276484] batt_temp_ctrl_init
  512. [ 1.276636] batt_temp_ctrl_probe
  513. [ 1.276697] get_prop_batt_capacity: low battery charge = 0%
  514. [ 1.277308] android_vibrator: default amplitude 88
  515. [ 1.277460] android vibrator probed
  516. [ 1.277613] fsa8008 init
  517. [ 1.277857] fsa8008 probe
  518. [ 1.278437] input: hs_detect as /devices/virtual/input/input5
  519. [ 1.278650] ALSA device list:
  520. [ 1.278712] #0: apq8064-tabla-snd-card
  521. [ 1.279658] Freeing init memory: 1032K
  522. [ 1.298397] type=1403 audit(1378544237.560:2): policy loaded auid=4294967295 ses=4294967295
  523. [ 1.298611] SELinux: Loaded policy from (null)
  524. [ 1.305844] init: could not import file '/init.carrier.rc' from '/init.rc'
  525. [ 1.306180] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  526. [ 1.307523] init: do_chown: Could not access /selinux/booleans
  527. [ 1.451335] USB fast charging is OFF.
  528. [ 1.451396] msm_otg msm_otg: Avail curr from USB = 1500
  529. [ 1.451548] msm_otg msm_otg: current: 0 -> 1500 (mA)
  530. [ 1.451670] pm_power_set_property_usb: usb_target_ma 1500
  531. [ 1.452830] msm_otg msm_otg: USB in low power mode
  532. [ 1.537005] get_prop_batt_capacity: low battery charge = 0%
  533. [ 1.539417] get_prop_batt_capacity: low battery charge = 0%
  534. [ 1.561086] keychord: using input dev pmic8xxx_pwrkey for fevent
  535. [ 1.561178] keychord: using input dev keypad_8064 for fevent
  536. [ 1.561666] init: cannot open '/initlogo.rle'
  537. [ 1.569143] init: Unable to open persistent property directory /data/property errno: 2
  538. [ 1.573019] charger:
  539. [ 1.573081] charger: *************** LAST KMSG ***************
  540. [ 1.573172] charger:
  541. [ 1.573264] charger: last_kmsg not found. Cold reset?
  542. [ 1.573386] charger:
  543. [ 1.573447] charger: ************* END LAST KMSG *************
  544. [ 1.573508] charger:
  545. [ 1.573599] charger: --------------- STARTING CHARGER MODE ---------------
  546. [ 1.631222] mipi_dsi_controller_cfg: DSI status=8 failed
  547. [ 1.631252] mipi_dsi_panel_power: mipi lcd function started status = 1
  548. [ 1.631283] ext_dsv_load: Failed to create debugfs directory
  549. [ 1.634396] mipi_dsi_panel_power : reset start.
  550. [ 1.646787] pm8921_battery_gauge_alarm_notify: status: 1
  551. [ 1.654997] mipi_lgit_lcd_on started
  552. [ 1.676880] mipi_lgit_lcd_on finished
  553. [ 1.697421] lm3530_backlight_off, on: 1
  554. [ 1.740912] mipi_lgit_lcd_off started
  555. [ 1.870990] mipi_lgit_lcd_off finished
  556. [ 1.871020] mipi_dsi_panel_power: mipi lcd function started status = 0
  557. [ 1.875995] lm3530_backlight_off, on: 0
  558. [ 1.876361] mipi_dsi_panel_power: mipi lcd function started status = 1
  559. [ 1.879017] mipi_dsi_panel_power : reset start.
  560. [ 1.900198] mipi_lgit_lcd_on started
  561. [ 1.951136] unplug_check_worker: usb_now=700, usb_target = 1500
  562. [ 1.961727] mipi_lgit_lcd_on finished
  563. [ 1.970669] lm3530_backlight_on, ++ lm3530_backlight_on
  564. [ 1.975278] charger: power supply usb (USB) offline (action=add num_online=0 num_supplies=1)
  565. [ 1.975553] charger: power supply touch (Unknown) offline (action=add num_online=0 num_supplies=2)
  566. [ 1.975888] charger: power supply wireless (Wireless) offline (action=add num_online=0 num_supplies=3)
  567. [ 1.977292] get_prop_batt_capacity: low battery charge = 0%
  568. [ 1.979703] get_prop_batt_capacity: low battery charge = 0%
  569. [ 1.982145] charger: power supply battery (Battery) (action=add num_online=0 num_supplies=4)
  570. [ 1.982511] charger: power supply pm8921-dc (Mains) online (action=add num_online=1 num_supplies=5)
  571. [ 1.988310] lm3530_backlight_off, on: 1
  572. [ 2.031039] mipi_lgit_lcd_off started
  573. [ 2.151289] unplug_check_worker: usb_now=850, usb_target = 1500
  574. [ 2.151442] mipi_lgit_lcd_off finished
  575. [ 2.151472] mipi_dsi_panel_power: mipi lcd function started status = 0
  576. [ 2.156447] lm3530_backlight_off, on: 0
  577. [ 2.158126] get_prop_batt_capacity: low battery charge = 0%
  578. [ 2.158248] mipi_dsi_panel_power: mipi lcd function started status = 1
  579. [ 2.160933] mipi_dsi_panel_power : reset start.
  580. [ 2.182084] mipi_lgit_lcd_on started
  581. [ 2.241873] mipi_lgit_lcd_on finished
  582. [ 2.250816] lm3530_backlight_on, ++ lm3530_backlight_on
  583. [ 2.787669] get_prop_batt_capacity: low battery charge = 0%
  584. [ 2.788951] get_prop_batt_capacity: low battery charge = 0%
  585. [ 2.791362] get_prop_batt_capacity: low battery charge = 0%
  586. [ 2.793865] charger: power supply battery (Battery) (action=change num_online=1 num_supplies=5)
  587. [ 2.951503] unplug_check_worker: usb_now=900, usb_target = 1500
  588. [ 3.151625] unplug_check_worker: usb_now=1100, usb_target = 1500
  589. [ 3.951594] unplug_check_worker: usb_now=1300, usb_target = 1500
  590. [ 4.151564] unplug_check_worker: usb_now=1500, usb_target = 1500
  591. [ 4.951533] unplug_check_worker: VIN: usb_now=1300, usb_target = 1300
  592. [ 6.856737] get_prop_batt_capacity: low battery charge = 0%
  593. [ 8.992827] keyboard reset (delayed 1500ms)
  594. [ 10.491469] keyreset: restarting system
  595. [ 10.491561] Going down for restart now
  596.  
  597. No errors detected
  598. Boot info:
  599. Last boot reason: reboot
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!