Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Green
- Device Model: WDC WD60EZRX-00MVLB1
- Serial Number: WD-WX31D55DFX0D
- LU WWN Device Id: 5 0014ee 2619ad955
- Firmware Version: 80.00A80
- User Capacity: 6,001,175,126,016 bytes [6.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 9
- ATA Standard is: Not recognized. Minor revision code: 0x001f
- Local Time is: Fri Oct 16 18:08:58 2015 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 3824) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 200 197 021 - 8958
- 4 Start_Stop_Count -O--CK 100 100 000 - 31
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 250
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 31
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
- 193 Load_Cycle_Count -O--CK 200 200 000 - 387
- 194 Temperature_Celsius -O---K 129 113 000 - 23
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x30 has 9 sectors [Reserved]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 40 sectors [Device vendor specific log]
- GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 23 Celsius
- Power Cycle Min/Max Temperature: 22/23 Celsius
- Lifetime Min/Max Temperature: 20/39 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (164)
- Index Estimated Time Temperature Celsius
- 165 2015-10-16 10:11 36 *****************
- ... ..( 6 skipped). .. *****************
- 172 2015-10-16 10:18 36 *****************
- 173 2015-10-16 10:19 35 ****************
- ... ..(241 skipped). .. ****************
- 415 2015-10-16 14:21 35 ****************
- 416 2015-10-16 14:22 34 ***************
- 417 2015-10-16 14:23 34 ***************
- 418 2015-10-16 14:24 ? -
- 419 2015-10-16 14:25 20 *
- 420 2015-10-16 14:26 20 *
- 421 2015-10-16 14:27 21 **
- 422 2015-10-16 14:28 21 **
- 423 2015-10-16 14:29 22 ***
- 424 2015-10-16 14:30 22 ***
- 425 2015-10-16 14:31 22 ***
- 426 2015-10-16 14:32 23 ****
- ... ..( 2 skipped). .. ****
- 429 2015-10-16 14:35 23 ****
- 430 2015-10-16 14:36 24 *****
- 431 2015-10-16 14:37 24 *****
- 432 2015-10-16 14:38 24 *****
- 433 2015-10-16 14:39 25 ******
- 434 2015-10-16 14:40 25 ******
- 435 2015-10-16 14:41 26 *******
- ... ..( 6 skipped). .. *******
- 442 2015-10-16 14:48 26 *******
- 443 2015-10-16 14:49 27 ********
- ... ..( 5 skipped). .. ********
- 449 2015-10-16 14:55 27 ********
- 450 2015-10-16 14:56 28 *********
- ... ..( 7 skipped). .. *********
- 458 2015-10-16 15:04 28 *********
- 459 2015-10-16 15:05 29 **********
- ... ..( 11 skipped). .. **********
- 471 2015-10-16 15:17 29 **********
- 472 2015-10-16 15:18 30 ***********
- ... ..( 3 skipped). .. ***********
- 476 2015-10-16 15:22 30 ***********
- 477 2015-10-16 15:23 31 ************
- ... ..( 15 skipped). .. ************
- 15 2015-10-16 15:39 31 ************
- 16 2015-10-16 15:40 32 *************
- ... ..( 59 skipped). .. *************
- 76 2015-10-16 16:40 32 *************
- 77 2015-10-16 16:41 33 **************
- ... ..( 52 skipped). .. **************
- 130 2015-10-16 17:34 33 **************
- 131 2015-10-16 17:35 ? -
- 132 2015-10-16 17:36 22 ***
- 133 2015-10-16 17:37 21 **
- 134 2015-10-16 17:38 22 ***
- ... ..( 2 skipped). .. ***
- 137 2015-10-16 17:41 22 ***
- 138 2015-10-16 17:42 23 ****
- 139 2015-10-16 17:43 24 *****
- ... ..( 3 skipped). .. *****
- 143 2015-10-16 17:47 24 *****
- 144 2015-10-16 17:48 25 ******
- ... ..( 3 skipped). .. ******
- 148 2015-10-16 17:52 25 ******
- 149 2015-10-16 17:53 26 *******
- ... ..( 4 skipped). .. *******
- 154 2015-10-16 17:58 26 *******
- 155 2015-10-16 17:59 27 ********
- 156 2015-10-16 18:00 27 ********
- 157 2015-10-16 18:01 27 ********
- 158 2015-10-16 18:02 ? -
- 159 2015-10-16 18:03 22 ***
- ... ..( 3 skipped). .. ***
- 163 2015-10-16 18:07 22 ***
- 164 2015-10-16 18:08 23 ****
- Warning: device does not support SCT Error Recovery Control command
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 356 Vendor specific
- ==============================================================================================================
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Green
- Device Model: WDC WD60EZRX-00MVLB1
- Serial Number: WD-WX11D55PXPPE
- LU WWN Device Id: 5 0014ee 2b6e7c450
- Firmware Version: 80.00A80
- User Capacity: 6,001,175,126,016 bytes [6.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 9
- ATA Standard is: Not recognized. Minor revision code: 0x001f
- Local Time is: Fri Oct 16 18:09:35 2015 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 5564) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0
- 3 Spin_Up_Time POS--K 202 202 021 - 8891
- 4 Start_Stop_Count -O--CK 100 100 000 - 6
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 21
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 6
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
- 193 Load_Cycle_Count -O--CK 200 200 000 - 54
- 194 Temperature_Celsius -O---K 129 116 000 - 23
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x30 has 9 sectors [Reserved]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 40 sectors [Device vendor specific log]
- GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 23 Celsius
- Power Cycle Min/Max Temperature: 21/23 Celsius
- Lifetime Min/Max Temperature: 20/37 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (313)
- Index Estimated Time Temperature Celsius
- 314 2015-10-16 10:12 36 *****************
- ... ..(146 skipped). .. *****************
- 461 2015-10-16 12:39 36 *****************
- 462 2015-10-16 12:40 35 ****************
- ... ..(102 skipped). .. ****************
- 87 2015-10-16 14:23 35 ****************
- 88 2015-10-16 14:24 ? -
- 89 2015-10-16 14:25 20 *
- 90 2015-10-16 14:26 20 *
- 91 2015-10-16 14:27 21 **
- 92 2015-10-16 14:28 21 **
- 93 2015-10-16 14:29 22 ***
- 94 2015-10-16 14:30 22 ***
- 95 2015-10-16 14:31 22 ***
- 96 2015-10-16 14:32 23 ****
- ... ..( 2 skipped). .. ****
- 99 2015-10-16 14:35 23 ****
- 100 2015-10-16 14:36 24 *****
- 101 2015-10-16 14:37 25 ******
- ... ..( 2 skipped). .. ******
- 104 2015-10-16 14:40 25 ******
- 105 2015-10-16 14:41 26 *******
- ... ..( 5 skipped). .. *******
- 111 2015-10-16 14:47 26 *******
- 112 2015-10-16 14:48 27 ********
- ... ..( 5 skipped). .. ********
- 118 2015-10-16 14:54 27 ********
- 119 2015-10-16 14:55 28 *********
- ... ..( 7 skipped). .. *********
- 127 2015-10-16 15:03 28 *********
- 128 2015-10-16 15:04 29 **********
- ... ..( 11 skipped). .. **********
- 140 2015-10-16 15:16 29 **********
- 141 2015-10-16 15:17 30 ***********
- ... ..( 4 skipped). .. ***********
- 146 2015-10-16 15:22 30 ***********
- 147 2015-10-16 15:23 31 ************
- ... ..( 15 skipped). .. ************
- 163 2015-10-16 15:39 31 ************
- 164 2015-10-16 15:40 32 *************
- ... ..( 59 skipped). .. *************
- 224 2015-10-16 16:40 32 *************
- 225 2015-10-16 16:41 33 **************
- ... ..( 52 skipped). .. **************
- 278 2015-10-16 17:34 33 **************
- 279 2015-10-16 17:35 ? -
- 280 2015-10-16 17:36 21 **
- 281 2015-10-16 17:37 21 **
- 282 2015-10-16 17:38 21 **
- 283 2015-10-16 17:39 22 ***
- 284 2015-10-16 17:40 22 ***
- 285 2015-10-16 17:41 22 ***
- 286 2015-10-16 17:42 23 ****
- 287 2015-10-16 17:43 23 ****
- 288 2015-10-16 17:44 23 ****
- 289 2015-10-16 17:45 24 *****
- 290 2015-10-16 17:46 24 *****
- 291 2015-10-16 17:47 24 *****
- 292 2015-10-16 17:48 25 ******
- ... ..( 3 skipped). .. ******
- 296 2015-10-16 17:52 25 ******
- 297 2015-10-16 17:53 26 *******
- 298 2015-10-16 17:54 27 ********
- ... ..( 6 skipped). .. ********
- 305 2015-10-16 18:01 27 ********
- 306 2015-10-16 18:02 ? -
- 307 2015-10-16 18:03 21 **
- 308 2015-10-16 18:04 21 **
- 309 2015-10-16 18:05 22 ***
- 310 2015-10-16 18:06 22 ***
- 311 2015-10-16 18:07 22 ***
- 312 2015-10-16 18:08 23 ****
- 313 2015-10-16 18:09 23 ****
- Warning: device does not support SCT Error Recovery Control command
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 393 Vendor specific
- =================================================================================================
- smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Green
- Device Model: WDC WD60EZRX-00MVLB1
- Serial Number: WD-WX21D45C77HK
- LU WWN Device Id: 5 0014ee 2b6d44898
- Firmware Version: 80.00A80
- User Capacity: 6,001,175,126,016 bytes [6.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 9
- ATA Standard is: Not recognized. Minor revision code: 0x001f
- Local Time is: Fri Oct 16 18:10:10 2015 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 3824) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 204 201 021 - 8766
- 4 Start_Stop_Count -O--CK 100 100 000 - 31
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 100 100 000 - 250
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 31
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
- 193 Load_Cycle_Count -O--CK 200 200 000 - 378
- 194 Temperature_Celsius -O---K 129 114 000 - 23
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x30 has 9 sectors [Reserved]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 40 sectors [Device vendor specific log]
- GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 23 Celsius
- Power Cycle Min/Max Temperature: 22/23 Celsius
- Lifetime Min/Max Temperature: 20/39 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (163)
- Index Estimated Time Temperature Celsius
- 164 2015-10-16 10:13 35 ****************
- 165 2015-10-16 10:14 35 ****************
- 166 2015-10-16 10:15 35 ****************
- 167 2015-10-16 10:16 34 ***************
- ... ..(244 skipped). .. ***************
- 412 2015-10-16 14:21 34 ***************
- 413 2015-10-16 14:22 33 **************
- 414 2015-10-16 14:23 33 **************
- 415 2015-10-16 14:24 33 **************
- 416 2015-10-16 14:25 ? -
- 417 2015-10-16 14:26 20 *
- 418 2015-10-16 14:27 20 *
- 419 2015-10-16 14:28 21 **
- 420 2015-10-16 14:29 21 **
- 421 2015-10-16 14:30 22 ***
- ... ..( 2 skipped). .. ***
- 424 2015-10-16 14:33 22 ***
- 425 2015-10-16 14:34 23 ****
- ... ..( 2 skipped). .. ****
- 428 2015-10-16 14:37 23 ****
- 429 2015-10-16 14:38 24 *****
- 430 2015-10-16 14:39 24 *****
- 431 2015-10-16 14:40 25 ******
- 432 2015-10-16 14:41 25 ******
- 433 2015-10-16 14:42 26 *******
- ... ..( 8 skipped). .. *******
- 442 2015-10-16 14:51 26 *******
- 443 2015-10-16 14:52 27 ********
- ... ..( 6 skipped). .. ********
- 450 2015-10-16 14:59 27 ********
- 451 2015-10-16 15:00 28 *********
- ... ..( 8 skipped). .. *********
- 460 2015-10-16 15:09 28 *********
- 461 2015-10-16 15:10 29 **********
- ... ..( 7 skipped). .. **********
- 469 2015-10-16 15:18 29 **********
- 470 2015-10-16 15:19 30 ***********
- ... ..( 8 skipped). .. ***********
- 1 2015-10-16 15:28 30 ***********
- 2 2015-10-16 15:29 31 ************
- ... ..( 24 skipped). .. ************
- 27 2015-10-16 15:54 31 ************
- 28 2015-10-16 15:55 32 *************
- ... ..( 99 skipped). .. *************
- 128 2015-10-16 17:35 32 *************
- 129 2015-10-16 17:36 ? -
- 130 2015-10-16 17:37 22 ***
- ... ..( 3 skipped). .. ***
- 134 2015-10-16 17:41 22 ***
- 135 2015-10-16 17:42 23 ****
- 136 2015-10-16 17:43 23 ****
- 137 2015-10-16 17:44 24 *****
- ... ..( 3 skipped). .. *****
- 141 2015-10-16 17:48 24 *****
- 142 2015-10-16 17:49 25 ******
- ... ..( 4 skipped). .. ******
- 147 2015-10-16 17:54 25 ******
- 148 2015-10-16 17:55 26 *******
- ... ..( 3 skipped). .. *******
- 152 2015-10-16 17:59 26 *******
- 153 2015-10-16 18:00 27 ********
- 154 2015-10-16 18:01 27 ********
- 155 2015-10-16 18:02 27 ********
- 156 2015-10-16 18:03 ? -
- 157 2015-10-16 18:04 22 ***
- ... ..( 3 skipped). .. ***
- 161 2015-10-16 18:08 22 ***
- 162 2015-10-16 18:09 23 ****
- 163 2015-10-16 18:10 23 ****
- Warning: device does not support SCT Error Recovery Control command
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 428 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement