Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2010.12 (Feb 05 2013 - 09:36:35) for EXYNOS4210
- CPU: S5PC210 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 800MHz
- EVT1 POP_B
- DRAM: 1 GiB
- Checking Boot Mode ... SDMMC
- MMC Device 0: 7596 MB
- MMC Device 1 not found
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- reading kernel..device 0 Start 1409, Count 16384
- MMC read: dev # 0, block # 1409, count 16384 ... 16384 blocks read: OK
- completed
- Boot with zImage
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Linux version 3.4.0-rc3+ (youngc@devboard) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1) ) #1 SMP PREEMPT Tue Feb 5 12:30:19 CST 2013
- [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROIDPC
- [ 0.000000] cma: CMA: reserved 8 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 8 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 16 MiB at 7f000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4210 (id 0x43210211)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=800000000, E=180000000 V=108000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=200000000
- [ 0.000000] ACLK100=100000000, ACLK160=160000000, ACLK133=133333333
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_fimd: source is xusbxti (1), rate is 0
- [ 0.000000] sclk_fimg2d: source is mout_g2d0 (0), rate is 0
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 100000000
- [ 0.000000] sclk_pwi: source is xusbxti (1), rate is 0
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @81151000 s12160 r8192 d12416 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
- [ 0.000000] Kernel command line: root=/dev/sda1 rw rootfstype=ext4 init=/sbin/init console=ttySAC1,115200 rootdelay=10
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1024MB = 1024MB total
- [ 0.000000] Memory: 997112k/997112k available, 51464k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
- [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x8081398c (8239 kB)
- [ 0.000000] .init : 0x80814000 - 0x80862f80 ( 316 kB)
- [ 0.000000] .data : 0x80864000 - 0x808ce850 ( 427 kB)
- [ 0.000000] .bss : 0x808ce874 - 0x80946658 ( 480 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 4294967291ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.045000] pid_max: default: 32768 minimum: 301
- [ 0.045000] Security Framework initialized
- [ 0.045000] AppArmor: AppArmor initialized
- [ 0.045000] Mount-cache hash table entries: 512
- [ 0.045000] CPU: Testing write buffer coherency: ok
- [ 0.045000] ftrace: allocating 23006 entries in 68 pages
- [ 0.075000] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900
- [ 0.075000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.075000] Setting up static identity map for 0x405c16c8 - 0x405c1720
- [ 0.075000] L310 cache controller enabled
- [ 0.075000] l2x0: 16 ways, CACHE_ID 0x4100c4c5, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.105000] CPU1: Booted secondary processor
- [ 0.125000] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901
- [ 0.125000] CPU1: Unknown IPI message 0x1
- [ 0.125000] Brought up 2 CPUs
- [ 0.125000] SMP: Total of 2 processors activated (3984.58 BogoMIPS).
- [ 0.125000] devtmpfs: initialized
- [ 0.130000] gpiochip_add: registered GPIOs 0 to 7 on device: GPA0
- [ 0.130000] gpiochip_add: registered GPIOs 9 to 14 on device: GPA1
- [ 0.130000] gpiochip_add: registered GPIOs 16 to 23 on device: GPB
- [ 0.130000] gpiochip_add: registered GPIOs 25 to 29 on device: GPC0
- [ 0.130000] gpiochip_add: registered GPIOs 31 to 35 on device: GPC1
- [ 0.130000] gpiochip_add: registered GPIOs 37 to 40 on device: GPD0
- [ 0.130000] gpiochip_add: registered GPIOs 42 to 45 on device: GPD1
- [ 0.130000] gpiochip_add: registered GPIOs 47 to 51 on device: GPE0
- [ 0.130000] gpiochip_add: registered GPIOs 53 to 60 on device: GPE1
- [ 0.130000] gpiochip_add: registered GPIOs 62 to 67 on device: GPE2
- [ 0.130000] gpiochip_add: registered GPIOs 69 to 76 on device: GPE3
- [ 0.130000] gpiochip_add: registered GPIOs 78 to 85 on device: GPE4
- [ 0.130000] gpiochip_add: registered GPIOs 87 to 94 on device: GPF0
- [ 0.130000] gpiochip_add: registered GPIOs 96 to 103 on device: GPF1
- [ 0.130000] gpiochip_add: registered GPIOs 105 to 112 on device: GPF2
- [ 0.130000] gpiochip_add: registered GPIOs 114 to 119 on device: GPF3
- [ 0.130000] gpiochip_add: registered GPIOs 121 to 128 on device: GPJ0
- [ 0.130000] gpiochip_add: registered GPIOs 130 to 134 on device: GPJ1
- [ 0.130000] gpiochip_add: registered GPIOs 136 to 142 on device: GPK0
- [ 0.130000] gpiochip_add: registered GPIOs 144 to 150 on device: GPK1
- [ 0.130000] gpiochip_add: registered GPIOs 152 to 158 on device: GPK2
- [ 0.130000] gpiochip_add: registered GPIOs 160 to 166 on device: GPK3
- [ 0.130000] gpiochip_add: registered GPIOs 168 to 175 on device: GPL0
- [ 0.130000] gpiochip_add: registered GPIOs 177 to 179 on device: GPL1
- [ 0.130000] gpiochip_add: registered GPIOs 181 to 188 on device: GPL2
- [ 0.130000] gpiochip_add: registered GPIOs 226 to 231 on device: GPY0
- [ 0.130000] gpiochip_add: registered GPIOs 233 to 236 on device: GPY1
- [ 0.130000] gpiochip_add: registered GPIOs 238 to 243 on device: GPY2
- [ 0.130000] gpiochip_add: registered GPIOs 245 to 252 on device: GPY3
- [ 0.130000] gpiochip_add: registered GPIOs 254 to 261 on device: GPY4
- [ 0.130000] gpiochip_add: registered GPIOs 263 to 270 on device: GPY5
- [ 0.130000] gpiochip_add: registered GPIOs 272 to 279 on device: GPY6
- [ 0.130000] gpiochip_add: registered GPIOs 190 to 197 on device: GPX0
- [ 0.130000] gpiochip_add: registered GPIOs 199 to 206 on device: GPX1
- [ 0.130000] gpiochip_add: registered GPIOs 208 to 215 on device: GPX2
- [ 0.130000] gpiochip_add: registered GPIOs 217 to 224 on device: GPX3
- [ 0.130000] gpiochip_add: registered GPIOs 281 to 287 on device: GPZ
- [ 0.130000] dummy:
- [ 0.135000] NET: Registered protocol family 16
- [ 0.145000] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.150000] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.150000] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.150000] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.150000] EXYNOS4210 PMU Initialize
- [ 0.150000] EXYNOS: Initializing architecture
- [ 0.155000] s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0
- [ 0.185000] bio: create slab <bio-0> at 0
- [ 0.185000] SCSI subsystem initialized
- [ 0.185000] usbcore: registered new interface driver usbfs
- [ 0.185000] usbcore: registered new interface driver hub
- [ 0.185000] usbcore: registered new device driver usb
- [ 0.185000] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.185000] s3c-i2c s3c2440-i2c.0: bus frequency set to 97 KHz
- [ 0.235000] VDD_ABB_3.3V: 3300 mV
- [ 0.240000] VDD_ALIVE_1.1V: 1100 mV
- [ 0.240000] VMIPI_1.1V: 1100 mV
- [ 0.245000] VDD_RTC_1.8V: 1800 mV
- [ 0.245000] VMIPI_1.8V: 1800 mV
- [ 0.245000] VDD_AUD_1.8V: 1800 mV
- [ 0.250000] VADC_3.3V: 3300 mV
- [ 0.250000] DVDD_SWB_2.8V: 2800 mV
- [ 0.255000] VDD_PLL_1.1V: 1100 mV
- [ 0.255000] VDD_AUD_3V: 3000 mV
- [ 0.260000] AVDD18_SWB_1.8V: 1800 mV
- [ 0.260000] VDD_SWB_3.3V: 3300 mV
- [ 0.265000] VDD_MIF_1.2V: 1200 mV
- [ 0.265000] VDD_ARM_1.2V: 925 <--> 1350 mV at 1350 mV
- [ 0.270000] VDD_INT_1.1V: 900 <--> 1100 mV at 1100 mV
- [ 0.270000] VDD_G3D_1.1V: 900 <--> 1100 mV at 1100 mV
- [ 0.270000] VDDQ_M1M2_1.2V: 1200 mV
- [ 0.275000] VDD_IO_1.8V: 1800 <--> 1950 mV at 2000 mV
- [ 0.275000] VDD_IO_1.8V: Voltage range but no REGULATOR_CHANGE_VOLTAGE
- [ 0.275000] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.275000] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.275000] s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
- [ 0.275000] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.275000] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.275000] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 97 KHz
- [ 0.275000] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.275000] Linux media interface: v0.10
- [ 0.275000] Linux video capture interface: v2.00
- [ 0.280000] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.280000] Bluetooth: Core ver 2.16
- [ 0.280000] NET: Registered protocol family 31
- [ 0.280000] Bluetooth: HCI device and connection manager initialized
- [ 0.280000] Bluetooth: HCI socket layer initialized
- [ 0.280000] Bluetooth: L2CAP socket layer initialized
- [ 0.280000] Bluetooth: SCO socket layer initialized
- [ 0.280000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.280000] NetLabel: Initializing
- [ 0.280000] NetLabel: domain hash size = 128
- [ 0.280000] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.280000] NetLabel: unlabeled traffic allowed by default
- [ 0.280000] Switching to clocksource mct-frc
- [ 0.295000] AppArmor: AppArmor Filesystem Enabled
- [ 0.315000] NET: Registered protocol family 2
- [ 0.315000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.315000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.315000] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
- [ 0.320000] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.320000] TCP: reno registered
- [ 0.320000] UDP hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.320000] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.320000] NET: Registered protocol family 1
- [ 0.320000] RPC: Registered named UNIX socket transport module.
- [ 0.320000] RPC: Registered udp transport module.
- [ 0.320000] RPC: Registered tcp transport module.
- [ 0.320000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.320000] audit: initializing netlink socket (disabled)
- [ 0.320000] type=2000 audit(0.320:1): initialized
- [ 0.400000] NFS: Registering the id_resolver key type
- [ 0.400000] ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 0.405000] Btrfs loaded
- [ 0.405000] msgmni has been set to 2011
- [ 0.405000] io scheduler noop registered
- [ 0.405000] io scheduler deadline registered
- [ 0.405000] io scheduler cfq registered (default)
- [ 0.405000] start plist test
- [ 0.410000] end plist test
- [ 0.410000] s3c-fb exynos4-fb.0: start latency exceeded, new value 792 ns
- [ 0.410000] s3c-fb exynos4-fb.0: state restore latency exceeded, new value 39667 ns
- [ 0.410000] s3c-fb exynos4-fb.0: stop latency exceeded, new value 625 ns
- [ 0.435000] Console: switching to colour frame buffer device 128x37
- [ 0.445000] s3c-fb exynos4-fb.0: window 0: fb
- [ 0.450000] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.450000] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.455000] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.455000] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.460000] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.460000] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.580000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.580000] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.580000] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.695000] console [ttySAC1] enabled
- [ 1.695000] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.705000] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.710000] [drm] Initialized drm 1.1.0 20060810
- [ 1.720000] Mali: Mali device driver loaded
- [ 1.720000] UMP: UMP device driver loaded
- [ 1.735000] brd: module loaded
- [ 1.735000] ahci ahci: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- [ 1.740000] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
- [ 1.750000] scsi0 : ahci_platform
- [ 1.750000] ata1: SATA max UDMA/133 mmio [mem 0x12560000-0x1256ffff] port 0x100 irq 148
- [ 1.760000] usbcore: registered new interface driver catc
- [ 1.765000] usbcore: registered new interface driver kaweth
- [ 1.770000] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
- [ 1.780000] usbcore: registered new interface driver pegasus
- [ 1.785000] usbcore: registered new interface driver rtl8150
- [ 1.790000] usbcore: registered new interface driver asix
- [ 1.795000] usbcore: registered new interface driver dm9601
- [ 1.800000] usbcore: registered new interface driver smsc75xx
- [ 1.805000] usbcore: registered new interface driver smsc95xx
- [ 1.810000] usbcore: registered new interface driver net1080
- [ 1.815000] usbcore: registered new interface driver plusb
- [ 1.825000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 1.830000] usbcore: registered new interface driver int51x1
- [ 1.835000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.840000] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.845000] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.855000] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.870000] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- [ 1.870000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.875000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.880000] usb usb1: Product: S5P EHCI Host Controller
- [ 1.885000] usb usb1: Manufacturer: Linux 3.4.0-rc3+ ehci_hcd
- [ 1.890000] usb usb1: SerialNumber: s5p-ehci
- [ 1.895000] hub 1-0:1.0: USB hub found
- [ 1.900000] hub 1-0:1.0: 3 ports detected
- [ 1.905000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.910000] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.915000] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 1.925000] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 1.985000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.990000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.995000] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 2.000000] usb usb2: Manufacturer: Linux 3.4.0-rc3+ ohci_hcd
- [ 2.005000] usb usb2: SerialNumber: exynos-ohci
- [ 2.010000] hub 2-0:1.0: USB hub found
- [ 2.015000] hub 2-0:1.0: 3 ports detected
- [ 2.020000] mousedev: PS/2 mouse device common for all mice
- [ 2.025000] i2c /dev entries driver
- [ 2.030000] usbcore: registered new interface driver sn9c102
- [ 2.035000] usbcore: registered new interface driver et61x251
- [ 2.040000] exynos4-hdmi supply hdmi-en not found, using dummy regulator
- [ 2.045000] s5p-hdmiphy 8-0038: probe successful
- [ 2.050000] s5p-hdmi exynos4-hdmi: probe successful
- [ 2.055000] Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
- [ 2.065000] s5p-mixer s5p-mixer: probe start
- [ 2.065000] s5p-mixer s5p-mixer: resources acquired
- [ 2.070000] s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
- [ 2.080000] s5p-mixer s5p-mixer: module s5p-sdo provides no subdev!
- [ 2.085000] s5p-mixer s5p-mixer: registered layer graph0 as /dev/video0
- [ 2.095000] fb1: registered frame buffer emulation for /dev/video0
- [ 2.100000] s5p-mixer s5p-mixer: registered layer graph1 as /dev/video1
- [ 2.105000] fb2: registered frame buffer emulation for /dev/video1
- [ 2.110000] s5p-mixer s5p-mixer: registered layer video0 as /dev/video2
- [ 2.120000] fb3: registered frame buffer emulation for /dev/video2
- [ 2.125000] s5p-mixer s5p-mixer: probe successful
- [ 2.130000] usbcore: registered new interface driver uvcvideo
- [ 2.135000] USB Video Class driver (1.1.1)
- [ 2.140000] Exynos: Kernel Thermal management registered
- [ 2.145000] s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
- [ 2.150000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
- [ 2.160000] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 2.165000] Bluetooth: Virtual HCI driver ver 1.3
- [ 2.170000] Bluetooth: HCI UART driver ver 2.2
- [ 2.175000] Bluetooth: HCI H4 protocol initialized
- [ 2.180000] Bluetooth: HCI BCSP protocol initialized
- [ 2.185000] Bluetooth: HCILL protocol initialized
- [ 2.190000] Bluetooth: HCIATH3K protocol initialized
- [ 2.195000] usbcore: registered new interface driver bcm203x
- [ 2.200000] usbcore: registered new interface driver bpa10x
- [ 2.205000] usbcore: registered new interface driver bfusb
- [ 2.210000] usbcore: registered new interface driver btusb
- [ 2.220000] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
- [ 2.220000] usb 1-1: new high-speed USB device number 2 using s5p-ehci
- [ 2.230000] usbcore: registered new interface driver ath3k
- [ 2.235000] cpuidle: using governor ladder
- [ 2.240000] cpuidle: using governor menu
- [ 2.245000] sdhci: Secure Digital Host Controller Interface driver
- [ 2.250000] sdhci: Copyright(c) Pierre Ossman
- [ 2.255000] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (100000000 Hz)
- [ 2.260000] exynos4-sdhci.2 supply vmmc not found, using dummy regulator
- [ 2.260000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.260000] ata1.00: ATA-8: ST9160310AS, 0303, max UDMA/133
- [ 2.260000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 2.260000] ata1.00: configured for UDMA/133
- [ 2.260000] scsi 0:0:0:0: Direct-Access ATA ST9160310AS 0303 PQ: 0 ANSI: 5
- [ 2.260000] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- [ 2.260000] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.260000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.260000] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.260000] sda: sda1 sda2
- [ 2.330000] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.330000] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [ 2.330000] s3c-sdhci exynos4-sdhci.0: clock source 2: mmc_busclk.2 (100000000 Hz)
- [ 2.330000] exynos4-sdhci.0 supply vmmc not found, using dummy regulator
- [ 2.355000] mmc1: SDHCI controller on samsung-hsmmc [exynos4-sdhci.0] using ADMA
- [ 2.360000] s3c-sdhci exynos4-sdhci.3: clock source 2: mmc_busclk.2 (100000000 Hz)
- [ 2.370000] exynos4-sdhci.3 supply vmmc not found, using dummy regulator
- [ 2.375000] mmc2: SDHCI controller on samsung-hsmmc [exynos4-sdhci.3] using ADMA
- [ 2.385000] usbcore: registered new interface driver usbhid
- [ 2.390000] usbhid: USB HID core driver
- [ 2.400000] max98088 0-0010: revision �
- [ 2.415000] asoc: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.420000] asoc: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.420000] input: max98089 Headset Jack as /devices/platform/hardkernel-snd/sound/card0/input0
- [ 2.430000] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 2.435000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.435000] ALSA device list:
- [ 2.435000] #0: max98089
- [ 2.435000] TCP: cubic registered
- [ 2.435000] NET: Registered protocol family 17
- [ 2.435000] Bluetooth: RFCOMM TTY layer initialized
- [ 2.435000] Bluetooth: RFCOMM socket layer initialized
- [ 2.435000] Bluetooth: RFCOMM ver 1.11
- [ 2.435000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 2.435000] Bluetooth: BNEP filters: protocol multicast
- [ 2.435000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 2.435000] lib80211: common routines for IEEE802.11 drivers
- [ 2.435000] rfkill_gpio rfkill_gpio: hardkernel-bt device registered.
- [ 2.435000] Registering the dns_resolver key type
- [ 2.435000] EXYNOS4210: Adaptive Support Voltage init
- [ 2.435000] EXYNOS4: ASV: Support 1.2GHz and Group is 0x40000005
- [ 2.435000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
- [ 2.520000] hub 1-1:1.0: USB hub found
- [ 2.520000] ThumbEE CPU extension supported.
- [ 2.520000] registered taskstats version 1
- [ 2.520000] VDD_G3D_1.1V: incomplete constraints, leaving on
- [ 2.520000] mmc0: new high speed SDHC card at address 0002
- [ 2.520000] VADC_3.3V: incomplete constraints, leaving on
- [ 2.520000] mmcblk0: mmc0:0002 00000 7.41 GiB
- [ 2.520000] VMIPI_1.8V: incomplete constraints, leaving on
- [ 2.520000] VMIPI_1.1V: incomplete constraints, leaving on
- [ 2.520000] VDD_ABB_3.3V: incomplete constraints, leaving on
- [ 2.520000] mmcblk0: p1 p2 p3 p4
- [ 2.575000] hub 1-1:1.0: 5 ports detected
- [ 2.580000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 2.585000] DVFS: VDD_ARM Voltage table set with 5 Group
- [ 2.590000] Waiting 10sec before mounting root device...
- [ 2.870000] usb 1-1.1: new high-speed USB device number 3 using s5p-ehci
- [ 2.975000] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 2.975000] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.990000] smsc95xx v1.0.4
- [ 3.150000] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-s5p-ehci-1.1, smsc95xx USB 2.0 Ethernet, 72:0e:27:35:da:11
- [ 13.090000] EXT4-fs (sda1): recovery complete
- [ 13.120000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.120000] VFS: Mounted root (ext4 filesystem) on device 8:1.
- [ 13.215000] devtmpfs: mounted
- [ 13.215000] Freeing init memory: 312K
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement