Guest User

Untitled

a guest
Sep 26th, 2013
51
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.54 KB | None | 0 0
  1. # You can configure DSfix by editing this file
  2. # Lines starting with "#" are ignored by the program and contain descritpions of the options
  3.  
  4. ###############################################################################
  5. # Graphics Options
  6. ###############################################################################
  7.  
  8. # internal rendering resolution of the game
  9. # higher values will decrease performance
  10. renderWidth 1920
  11. renderHeight 1080
  12.  
  13. # The display width/height
  14. # 0 means use the same resolution as renderWidth/Height
  15. # (use for downscaling - if in doubt, leave at 0)
  16. presentWidth 0
  17. presentHeight 0
  18.  
  19. ############# Anti Aliasing
  20.  
  21. # AA toggle and quality setting
  22. # 0 = off (best performance, worst IQ)
  23. # 1 = low
  24. # 2 = medium
  25. # 3 = high
  26. # 4 = ultra (worst performance, best IQ)
  27. aaQuality 2
  28.  
  29. # AA type
  30. # either "SMAA" or "FXAA"
  31. aaType SMAA
  32.  
  33. ############# Ambient Occlusion
  34.  
  35. # Enable and set the strength of the SSAO effect (all 3 settings have the same performance impact!)
  36. # 0 = off
  37. # 1 = low
  38. # 2 = medium
  39. # 3 = high
  40. ssaoStrength 0
  41.  
  42. # Set SSAO scale
  43. # 1 = high quality (default)
  44. # 2 = lower quality, lower impact on performance
  45. # 3 = lowest quality, lowest impact on performance
  46. ssaoScale 1
  47.  
  48. # Determine the type of AO used
  49. # "VSSAO" = Volumetric SSAO (default, suggested)
  50. # "HBAO" = Horizon-Based Ambient Occlusion
  51. # "SCAO" = VSSAO + HBAO
  52. # VSSAO and HBAO types have a different effect and similar performance
  53. # SCAO combines both, with a higher performance impact
  54. ssaoType VSSAO
  55.  
  56. ############# Depth of field
  57.  
  58. # Depth of Field resolution override, possible values:
  59. # 0 = no change from default (DoF pyramid starts at 512x360)
  60. # 540 = DoF pyramid starts at 960x540
  61. # 810 = DoF pyramid starts at 1440x810
  62. # 1080 = DoF pyramid starts at 1920x1080
  63. # 2160 = DoF pyramid starts at 3840x2160
  64. # higher values will decrease performance
  65. # do NOT set this to the same value as your vertical rendering resolution!
  66. dofOverrideResolution 810
  67.  
  68. # Depth of Field scaling override (NOT RECOMMENDED)
  69. # 0 = DoF scaling enabled (default, recommended)
  70. # 1 = DoF scaling disabled (sharper, worse performance, not as originally intended)
  71. disableDofScaling 0
  72.  
  73. # Depth of field additional blur
  74. # allows you to use high DoF resolutions and still get the originally intended effect
  75. # suggested values:
  76. # o (off) at default DoF resolution
  77. # 0 or 1 at 540 DoF resolution
  78. # 1 or 2 above that
  79. # 3 or 4 at 2160 DoF resolution (if you're running a 680+)
  80. dofBlurAmount 1
  81.  
  82. ############# Framerate
  83.  
  84. # Enable variable framerate (up to 60)
  85. # NOTE:
  86. # - this requires in-memory modification of game code, and may get you banned from GFWL
  87. # - there may be unintended side-effects in terms of gameplay
  88. # - you need a very powerful system (especially CPU) in order to maintain 60 FPS
  89. # - in some instances, collision detection may fail. Avoid sliding down ladders
  90. # Use this at your own risk!
  91. # 0 = no changes to game code
  92. # 1 = unlock the frame rate
  93. unlockFPS 0
  94.  
  95. # FPS limit, only used with unlocked framerate
  96. # do not set this much higher than 60, this will lead to various issues with the engine
  97. FPSlimit 60
  98.  
  99. # FPS threshold
  100. # DSfix will dynamically disable AA if your framerate drops below this value
  101. # and re-enable it once it has normalized (with a bit of hysteresis thresholding)
  102. FPSthreshold 28
  103.  
  104. ############# Filtering
  105.  
  106. # texture filtering override
  107. # 0 = no change
  108. # 1 = enable some bilinear filtering (use only if you need it!)
  109. # 2 = full AF override (may degrade performance)
  110. # if in doubt, leave this at 0
  111. filteringOverride 0
  112.  
  113. ###############################################################################
  114. # HUD options
  115. ###############################################################################
  116.  
  117. # Enable HUD modifications
  118. # 0 = off (default) - none of the options below will do anything!
  119. # 1 = on
  120. enableHudMod 0
  121.  
  122. # Remove the weapon icons from the HUD
  123. # (you can see which weapons you have equipped from your character model)
  124. enableMinimalHud 1
  125.  
  126. # Scale down HuD, examples:
  127. # 1.0 = original scale
  128. # 0.75 = 75% of the original size
  129. hudScaleFactor 0.75
  130.  
  131. # Set opacity for different elements of the HUD
  132. # 1.0 = fully opaque
  133. # 0.0 = fully transparent
  134. # Top left: health bars, stamina bar, humanity counter, status indicators
  135. hudTopLeftOpacity 0.8f
  136. # Bottom left: item indicators & counts
  137. hudBottomLeftOpacity 0.75f
  138. # Bottom right: soul count
  139. hudBottomRightOpacity 0.5f
  140.  
  141. ###############################################################################
  142. # Window & Mouse Cursor Options
  143. ###############################################################################
  144.  
  145. # borderless fullscreen mode
  146. # make sure to select windowed mode in the game settings for this to work!
  147. # 0 = disable
  148. # 1 = enable
  149. borderlessFullscreen 0
  150.  
  151. # disable cursor at startup
  152. # 0 = no change
  153. # 1 = off at start
  154. disableCursor 1
  155.  
  156. # capture cursor (do not allow it to leave the window)
  157. # 0 = don't capture
  158. # 1 = capture
  159. # (this also works if the cursor is not visible)
  160. captureCursor 1
  161.  
  162. ###############################################################################
  163. # Save Game Backup Options
  164. ###############################################################################
  165.  
  166. # enables save game backups
  167. # 0 = no backups
  168. # 1 = backups enabled
  169. # backups are stored in the save folder, as "[timestamp]_[original name].bak"
  170. enableBackups 1
  171.  
  172. # backup interval in seconds (1500 = 25 minutes)
  173. # (minimum setting 600)
  174. backupInterval 600
  175.  
  176. # maximum amount of backups, older ones will be deleted
  177. maxBackups 20
  178.  
  179. ###############################################################################
  180. # Texture Override Options
  181. ###############################################################################
  182.  
  183. # enables texture dumping
  184. # you *only* need this if you want to create your own override textures
  185. # textures will be dumped to "dsfix\tex_override\[hash].tga"
  186. enableTextureDumping 0
  187.  
  188. # enables texture override
  189. # textures in "dsfix\tex_override\[hash].png" will replace the corresponding originals
  190. # will cause a small slowdown during texture loading!
  191. enableTextureOverride 1
  192.  
  193. ###############################################################################
  194. # Other Options
  195. ###############################################################################
  196.  
  197. # skip the intro logos
  198. # this should now be slightly more stable, but should still be
  199. # the first thing to disable in case you experience any problems
  200. skipIntro 1
  201.  
  202. # change the screenshot directory
  203. # default: . (current directory)
  204. # example: C:\Users\Peter\Pictures
  205. # directory must exist!
  206. screenshotDir .
  207.  
  208. # override the in-game language
  209. # none = no override
  210. # en-GB = English, fr = French, it = Italian, de = German, es = Spanish
  211. # ko = Korean, zh-tw = Chinese, pl = Polish, ru = Russian
  212. # this does not work in Windows XP!
  213. overrideLanguage none
  214.  
  215. # Dinput dll chaining
  216. # if you want to use another dinput8.dll wrapper together
  217. # with DSfix, rename it (e.g. "dinputwrapper.dll") and put the new name here
  218. #dinput8dllWrapper none
  219. # dsmfix.dll
  220. dinput8dllWrapper dsmfix.dll
  221.  
  222. # D3D adapter override
  223. # -1 = no override
  224. # N = use adapter N
  225. # this setting is for multiple (non-SLI/crossfire) GPUs
  226. # everyone else should leave it at -1
  227. d3dAdapterOverride -1
  228.  
  229. # Log level - 0 to 11, higher numbers mean more logging
  230. # only enable for debugging
  231. logLevel 0
  232.  
  233. ###############################################################################
  234. # The settings below are not yet ready to use!!
  235. ###############################################################################
  236.  
  237. # You can only set either forceFullscreen or forceWindowed (or neither)
  238. # 0 = off, 1 = on
  239. forceWindowed 0
  240. forceFullscreen 0
  241.  
  242. # turn on/off Vsync
  243. enableVsync 0
  244. # adjust display refresh rate in fullscreen mode - this is NOT linked to FPS!
  245. fullscreenHz 60
Advertisement
Add Comment
Please, Sign In to add comment