Don't like ads? PRO users don't see any ads ;-)
Public Pastes
Guest

dmesg_3.2

By: gmas on Jan 5th, 2012  |  syntax: None  |  size: 130.30 KB  |  hits: 41  |  expires: Never
download  |  raw  |  embed  |  report abuse  |  print
Text below is selected. Please press Ctrl+C to copy to your clipboard. (⌘+C on Mac)
  1. geomas@geomas-MacBookPro:~$ dmesg
  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 3.2.0-custom (root@geomas-MacBookPro) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #2 SMP PREEMPT Thu Jan 5 11:14:09 PST 2012
  5. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-custom root=UUID=d7a86d8a-61e1-49ee-8547-f0a62efd6a23 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
  6. [    0.000000] KERNEL supported cpus:
  7. [    0.000000]   Intel GenuineIntel
  8. [    0.000000] BIOS-provided physical RAM map:
  9. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000008e000 (usable)
  10. [    0.000000]  BIOS-e820: 000000000008e000 - 0000000000090000 (reserved)
  11. [    0.000000]  BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
  12. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000c0000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  14. [    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
  15. [    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
  16. [    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
  17. [    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
  18. [    0.000000]  BIOS-e820: 0000000040200000 - 000000008ad34000 (usable)
  19. [    0.000000]  BIOS-e820: 000000008ad34000 - 000000008ad5f000 (ACPI NVS)
  20. [    0.000000]  BIOS-e820: 000000008ad5f000 - 000000008afa3000 (ACPI data)
  21. [    0.000000]  BIOS-e820: 000000008afa3000 - 000000008afff000 (reserved)
  22. [    0.000000]  BIOS-e820: 000000008afff000 - 000000008b000000 (ACPI data)
  23. [    0.000000]  BIOS-e820: 000000008b000000 - 000000008fa00000 (reserved)
  24. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  25. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  26. [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
  27. [    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
  28. [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
  29. [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
  30. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  31. [    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
  32. [    0.000000]  BIOS-e820: 0000000100000000 - 000000026fe00000 (usable)
  33. [    0.000000] NX (Execute Disable) protection: active
  34. [    0.000000] DMI 2.4 present.
  35. [    0.000000] DMI: Apple Inc. MacBookPro8,1/Mac-94245B3640C91C81, BIOS    MBP81.88Z.0047.B22.1109281426 09/28/11
  36. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  37. [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  38. [    0.000000] last_pfn = 0x26fe00 max_arch_pfn = 0x400000000
  39. [    0.000000] MTRR default type: write-back
  40. [    0.000000] MTRR fixed ranges enabled:
  41. [    0.000000]   00000-9FFFF write-back
  42. [    0.000000]   A0000-BFFFF uncachable
  43. [    0.000000]   C0000-DFFFF write-protect
  44. [    0.000000]   E0000-FFFFF uncachable
  45. [    0.000000] MTRR variable ranges enabled:
  46. [    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
  47. [    0.000000]   1 base 0A0000000 mask FE0000000 uncachable
  48. [    0.000000]   2 base 090000000 mask FF0000000 uncachable
  49. [    0.000000]   3 base 08C000000 mask FFC000000 uncachable
  50. [    0.000000]   4 base 08B800000 mask FFF800000 uncachable
  51. [    0.000000]   5 disabled
  52. [    0.000000]   6 disabled
  53. [    0.000000]   7 disabled
  54. [    0.000000]   8 disabled
  55. [    0.000000]   9 disabled
  56. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  57. [    0.000000] last_pfn = 0x8ad34 max_arch_pfn = 0x400000000
  58. [    0.000000] initial memory mapped : 0 - 20000000
  59. [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
  60. [    0.000000] init_memory_mapping: 0000000000000000-000000008ad34000
  61. [    0.000000]  0000000000 - 008ac00000 page 2M
  62. [    0.000000]  008ac00000 - 008ad34000 page 4k
  63. [    0.000000] kernel direct mapping tables up to 8ad34000 @ 1fffb000-20000000
  64. [    0.000000] init_memory_mapping: 0000000100000000-000000026fe00000
  65. [    0.000000]  0100000000 - 026fe00000 page 2M
  66. [    0.000000] kernel direct mapping tables up to 26fe00000 @ 8ad29000-8ad34000
  67. [    0.000000] RAMDISK: 36724000 - 3738a000
  68. [    0.000000] Reserving 128MB of memory at 736MB for crashkernel (System RAM: 9982MB)
  69. [    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
  70. [    0.000000] ACPI: XSDT 000000008ad8e1c0 000A4 (v01 APPLE   Apple00 00000047      01000013)
  71. [    0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE   Apple00 00000047 Loki 0000005F)
  72. [    0.000000] ACPI: DSDT 000000008ad80000 06F12 (v01 APPLE  MacBookP 00080001 INTL 20061109)
  73. [    0.000000] ACPI: FACS 000000008ad3e000 00040
  74. [    0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
  75. [    0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE   Apple00 00000001 Loki 0000005F)
  76. [    0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
  77. [    0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
  78. [    0.000000] ACPI: SSDT 000000008ad7b000 00024 (v01 APPLE   SmcDppt 00001000 INTL 20061109)
  79. [    0.000000] ACPI: SSDT 000000008ad79000 0061A (v01 APPLE  UsbNoRmh 00001000 INTL 20061109)
  80. [    0.000000] ACPI: SSDT 000000008ad76000 00159 (v02 APPLE     IGHda 00001000 INTL 20061109)
  81. [    0.000000] ACPI: SSDT 000000008ad73000 00527 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
  82. [    0.000000] ACPI: SSDT 000000008ad72000 009B1 (v01  PmRef    CpuPm 00003000 INTL 20061109)
  83. [    0.000000] ACPI: SSDT 000000008ad71000 00315 (v01  PmRef  Cpu0Tst 00003000 INTL 20061109)
  84. [    0.000000] ACPI: SSDT 000000008ad70000 0037A (v01  PmRef    ApTst 00003000 INTL 20061109)
  85. [    0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
  86. [    0.000000] ACPI: SSDT 000000008ad7f000 00124 (v01 SataRe  SataPri 00001000 INTL 20061109)
  87. [    0.000000] ACPI: SSDT 000000008ad7e000 000FA (v01 SataRe  SataSec 00001000 INTL 20061109)
  88. [    0.000000] ACPI: SSDT 000000008ad7d000 00032 (v01  Apple   SsdtS3 00001000 INTL 20061109)
  89. [    0.000000] ACPI: Local APIC address 0xfee00000
  90. [    0.000000] No NUMA configuration found
  91. [    0.000000] Faking a node at 0000000000000000-000000026fe00000
  92. [    0.000000] Initmem setup node 0 0000000000000000-000000026fe00000
  93. [    0.000000]   NODE_DATA [000000026fdfb000 - 000000026fdfffff]
  94. [    0.000000]  [ffffea0000000000-ffffea0009bfffff] PMD -> [ffff880267400000-ffff88026f3fffff] on node 0
  95. [    0.000000] Zone PFN ranges:
  96. [    0.000000]   DMA      0x00000010 -> 0x00001000
  97. [    0.000000]   DMA32    0x00001000 -> 0x00100000
  98. [    0.000000]   Normal   0x00100000 -> 0x0026fe00
  99. [    0.000000] Movable zone start PFN for each node
  100. [    0.000000] early_node_map[6] active PFN ranges
  101. [    0.000000]     0: 0x00000010 -> 0x0000008e
  102. [    0.000000]     0: 0x00000090 -> 0x0000009f
  103. [    0.000000]     0: 0x00000100 -> 0x00020000
  104. [    0.000000]     0: 0x00020200 -> 0x00040000
  105. [    0.000000]     0: 0x00040200 -> 0x0008ad34
  106. [    0.000000]     0: 0x00100000 -> 0x0026fe00
  107. [    0.000000] On node 0 totalpages: 2074305
  108. [    0.000000]   DMA zone: 64 pages used for memmap
  109. [    0.000000]   DMA zone: 5 pages reserved
  110. [    0.000000]   DMA zone: 3912 pages, LIFO batch:0
  111. [    0.000000]   DMA32 zone: 16320 pages used for memmap
  112. [    0.000000]   DMA32 zone: 547188 pages, LIFO batch:31
  113. [    0.000000]   Normal zone: 23544 pages used for memmap
  114. [    0.000000]   Normal zone: 1483272 pages, LIFO batch:31
  115. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  116. [    0.000000] ACPI: Local APIC address 0xfee00000
  117. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  118. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
  119. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
  120. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  121. [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
  122. [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
  123. [    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
  124. [    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
  125. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  126. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  127. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  128. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
  129. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
  130. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
  131. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
  132. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
  133. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  134. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  135. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  136. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  137. [    0.000000] ACPI: IRQ0 used by override.
  138. [    0.000000] ACPI: IRQ2 used by override.
  139. [    0.000000] ACPI: IRQ9 used by override.
  140. [    0.000000] Using ACPI (MADT) for SMP configuration information
  141. [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  142. [    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
  143. [    0.000000] nr_irqs_gsi: 40
  144. [    0.000000] PM: Registered nosave memory: 000000000008e000 - 0000000000090000
  145. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  146. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000
  147. [    0.000000] PM: Registered nosave memory: 00000000000c0000 - 00000000000e0000
  148. [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  149. [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
  150. [    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
  151. [    0.000000] PM: Registered nosave memory: 000000008ad34000 - 000000008ad5f000
  152. [    0.000000] PM: Registered nosave memory: 000000008ad5f000 - 000000008afa3000
  153. [    0.000000] PM: Registered nosave memory: 000000008afa3000 - 000000008afff000
  154. [    0.000000] PM: Registered nosave memory: 000000008afff000 - 000000008b000000
  155. [    0.000000] PM: Registered nosave memory: 000000008b000000 - 000000008fa00000
  156. [    0.000000] PM: Registered nosave memory: 000000008fa00000 - 00000000e0000000
  157. [    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
  158. [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
  159. [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
  160. [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
  161. [    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
  162. [    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000
  163. [    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
  164. [    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
  165. [    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
  166. [    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
  167. [    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
  168. [    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
  169. [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
  170. [    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
  171. [    0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
  172. [    0.000000] Allocating PCI resources starting at 8fa00000 (gap: 8fa00000:50600000)
  173. [    0.000000] Booting paravirtualized kernel on bare hardware
  174. [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
  175. [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88026fa00000 s83008 r8192 d23488 u262144
  176. [    0.000000] pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152
  177. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  178. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2034372
  179. [    0.000000] Policy zone: Normal
  180. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-custom root=UUID=d7a86d8a-61e1-49ee-8547-f0a62efd6a23 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
  181. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  182. [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
  183. [    0.000000] Memory: 7939848k/10221568k available (6226k kernel code, 1924348k absent, 357372k reserved, 6843k data, 896k init)
  184. [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  185. [    0.000000] Preemptible hierarchical RCU implementation.
  186. [    0.000000] NR_IRQS:16640 nr_irqs:744 16
  187. [    0.000000] Extended CMOS year: 2000
  188. [    0.000000] Console: colour dummy device 80x25
  189. [    0.000000] console [tty0] enabled
  190. [    0.000000] allocated 67108864 bytes of page_cgroup
  191. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  192. [    0.000000] hpet clockevent registered
  193. [    0.000000] Fast TSC calibration using PIT
  194. [    0.001000] Detected 2394.367 MHz processor.
  195. [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.73 BogoMIPS (lpj=2394367)
  196. [    0.000006] pid_max: default: 32768 minimum: 301
  197. [    0.000026] Security Framework initialized
  198. [    0.000037] AppArmor: AppArmor initialized
  199. [    0.000753] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  200. [    0.002513] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  201. [    0.003228] Mount-cache hash table entries: 256
  202. [    0.003328] Initializing cgroup subsys cpuacct
  203. [    0.003333] Initializing cgroup subsys memory
  204. [    0.003339] Initializing cgroup subsys devices
  205. [    0.003340] Initializing cgroup subsys freezer
  206. [    0.003342] Initializing cgroup subsys net_cls
  207. [    0.003344] Initializing cgroup subsys blkio
  208. [    0.003348] Initializing cgroup subsys perf_event
  209. [    0.003374] CPU: Physical Processor ID: 0
  210. [    0.003375] CPU: Processor Core ID: 0
  211. [    0.003380] mce: CPU supports 7 MCE banks
  212. [    0.003391] CPU0: Thermal monitoring enabled (TM1)
  213. [    0.003398] using mwait in idle threads.
  214. [    0.004522] ACPI: Core revision 20110623
  215. [    0.011643] ftrace: allocating 23226 entries in 92 pages
  216. [    0.021182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  217. [    0.031173] CPU0: Intel(R) Core(TM) i5-2435M CPU @ 2.40GHz stepping 07
  218. [    0.132970] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
  219. [    0.132975] PEBS disabled due to CPU errata.
  220. [    0.132978] ... version:                3
  221. [    0.132979] ... bit width:              48
  222. [    0.132980] ... generic registers:      4
  223. [    0.132981] ... value mask:             0000ffffffffffff
  224. [    0.132983] ... max period:             000000007fffffff
  225. [    0.132984] ... fixed-purpose events:   3
  226. [    0.132985] ... event mask:             000000070000000f
  227. [    0.139093] NMI watchdog enabled, takes one hw-pmu counter.
  228. [    0.146979] Booting Node   0, Processors  #1
  229. [    0.146986] smpboot cpu 1: start_ip = 9a000
  230. [    0.237959] NMI watchdog enabled, takes one hw-pmu counter.
  231. [    0.243842]  #2
  232. [    0.243846] smpboot cpu 2: start_ip = 9a000
  233. [    0.334744] NMI watchdog enabled, takes one hw-pmu counter.
  234. [    0.340685]  #3
  235. [    0.340690] smpboot cpu 3: start_ip = 9a000
  236. [    0.431567] NMI watchdog enabled, takes one hw-pmu counter.
  237. [    0.433494] Brought up 4 CPUs
  238. [    0.433500] Total of 4 processors activated (19154.26 BogoMIPS).
  239. [    0.436876] devtmpfs: initialized
  240. [    0.437004] PM: Registering ACPI NVS region at 8ad34000 (176128 bytes)
  241. [    0.437735] print_constraints: dummy:
  242. [    0.437766] RTC time: 23:58:12, date: 01/05/12
  243. [    0.437795] NET: Registered protocol family 16
  244. [    0.437886] ACPI: bus type pci registered
  245. [    0.437947] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
  246. [    0.437950] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in E820
  247. [    0.472224] PCI: Using configuration type 1 for base access
  248. [    0.472891] bio: create slab <bio-0> at 0
  249. [    0.472959] ACPI: Added _OSI(Module Device)
  250. [    0.472961] ACPI: Added _OSI(Processor Device)
  251. [    0.472963] ACPI: Added _OSI(3.0 _SCP Extensions)
  252. [    0.472964] ACPI: Added _OSI(Processor Aggregator Device)
  253. [    0.474642] ACPI: EC: EC description table is found, configuring boot EC
  254. [    0.480974] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  255. [    2.477575] ACPI: SSDT 000000008ad39818 00781 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
  256. [    2.478000] ACPI: Dynamic OEM Table Load:
  257. [    2.478003] ACPI: SSDT           (null) 00781 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
  258. [    2.480417] ACPI: SSDT 000000008ad3ac18 003A4 (v01  PmRef    ApIst 00003000 INTL 20061109)
  259. [    2.480889] ACPI: Dynamic OEM Table Load:
  260. [    2.480891] ACPI: SSDT           (null) 003A4 (v01  PmRef    ApIst 00003000 INTL 20061109)
  261. [    2.483293] ACPI: SSDT 000000008ad38d98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
  262. [    2.483715] ACPI: Dynamic OEM Table Load:
  263. [    2.483717] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
  264. [    2.486650] ACPI: Interpreter enabled
  265. [    2.486653] ACPI: (supports S0 S3 S4 S5)
  266. [    2.486670] ACPI: Using IOAPIC for interrupt routing
  267. [    2.512969] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
  268. [    2.513157] ACPI: No dock devices found.
  269. [    2.513159] HEST: Table not found.
  270. [    2.513161] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  271. [    2.513425] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  272. [    2.513842] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
  273. [    2.513844] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
  274. [    2.513846] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
  275. [    2.513849] pci_root PNP0A08:00: host bridge window [mem 0x8fa00000-0xfeafffff]
  276. [    2.513851] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
  277. [    2.513862] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
  278. [    2.513898] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
  279. [    2.513924] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  280. [    2.513927] pci 0000:00:01.0: PME# disabled
  281. [    2.513940] pci 0000:00:01.1: [8086:0105] type 1 class 0x000604
  282. [    2.513964] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
  283. [    2.513966] pci 0000:00:01.1: PME# disabled
  284. [    2.513985] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
  285. [    2.513996] pci 0000:00:02.0: reg 10: [mem 0xa0000000-0xa03fffff 64bit]
  286. [    2.514002] pci 0000:00:02.0: reg 18: [mem 0x90000000-0x9fffffff 64bit pref]
  287. [    2.514007] pci 0000:00:02.0: reg 20: [io  0x2000-0x203f]
  288. [    2.514058] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
  289. [    2.514082] pci 0000:00:16.0: reg 10: [mem 0xa0907100-0xa090710f 64bit]
  290. [    2.514150] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  291. [    2.514155] pci 0000:00:16.0: PME# disabled
  292. [    2.514185] pci 0000:00:1a.0: [8086:1c2c] type 0 class 0x000c03
  293. [    2.514230] pci 0000:00:1a.0: reg 20: [io  0x2120-0x213f]
  294. [    2.514287] pci 0000:00:1a.7: [8086:1c2d] type 0 class 0x000c03
  295. [    2.514310] pci 0000:00:1a.7: reg 10: [mem 0xa0906c00-0xa0906fff]
  296. [    2.514385] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  297. [    2.514390] pci 0000:00:1a.7: PME# disabled
  298. [    2.514417] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
  299. [    2.514432] pci 0000:00:1b.0: reg 10: [mem 0xa0900000-0xa0903fff 64bit]
  300. [    2.514488] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  301. [    2.514492] pci 0000:00:1b.0: PME# disabled
  302. [    2.514515] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
  303. [    2.514580] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  304. [    2.514584] pci 0000:00:1c.0: PME# disabled
  305. [    2.514611] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
  306. [    2.514675] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  307. [    2.514679] pci 0000:00:1c.1: PME# disabled
  308. [    2.514704] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
  309. [    2.514769] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  310. [    2.514773] pci 0000:00:1c.2: PME# disabled
  311. [    2.514807] pci 0000:00:1d.0: [8086:1c27] type 0 class 0x000c03
  312. [    2.514850] pci 0000:00:1d.0: reg 20: [io  0x20c0-0x20df]
  313. [    2.514913] pci 0000:00:1d.7: [8086:1c26] type 0 class 0x000c03
  314. [    2.514935] pci 0000:00:1d.7: reg 10: [mem 0xa0906800-0xa0906bff]
  315. [    2.515011] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  316. [    2.515016] pci 0000:00:1d.7: PME# disabled
  317. [    2.515041] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
  318. [    2.515160] pci 0000:00:1f.2: [8086:1c01] type 0 class 0x000101
  319. [    2.515175] pci 0000:00:1f.2: reg 10: [io  0x2148-0x214f]
  320. [    2.515184] pci 0000:00:1f.2: reg 14: [io  0x215c-0x215f]
  321. [    2.515193] pci 0000:00:1f.2: reg 18: [io  0x2140-0x2147]
  322. [    2.515204] pci 0000:00:1f.2: reg 1c: [io  0x2158-0x215b]
  323. [    2.515213] pci 0000:00:1f.2: reg 20: [io  0x2060-0x206f]
  324. [    2.515222] pci 0000:00:1f.2: reg 24: [io  0xffe0-0xffef]
  325. [    2.515261] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
  326. [    2.515277] pci 0000:00:1f.3: reg 10: [mem 0xa0907000-0xa09070ff 64bit]
  327. [    2.515300] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
  328. [    2.515352] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  329. [    2.515355] pci 0000:00:01.0:   bridge window [mem 0xa0800000-0xa08fffff]
  330. [    2.515379] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
  331. [    2.515382] pci 0000:00:01.1:   bridge window [io  0x3000-0x3fff]
  332. [    2.515384] pci 0000:00:01.1:   bridge window [mem 0xa0a00000-0xa4efffff]
  333. [    2.515388] pci 0000:00:01.1:   bridge window [mem 0xa4f00000-0xa8efffff 64bit pref]
  334. [    2.515497] pci 0000:02:00.0: [14e4:16b4] type 0 class 0x000200
  335. [    2.515534] pci 0000:02:00.0: reg 10: [mem 0xa0400000-0xa040ffff 64bit pref]
  336. [    2.515562] pci 0000:02:00.0: reg 18: [mem 0xa0410000-0xa041ffff 64bit pref]
  337. [    2.515679] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  338. [    2.515685] pci 0000:02:00.0: PME# disabled
  339. [    2.515762] pci 0000:02:00.1: [14e4:16bc] type 0 class 0x000805
  340. [    2.515796] pci 0000:02:00.1: reg 10: [mem 0xa0420000-0xa042ffff 64bit pref]
  341. [    2.515934] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
  342. [    2.515940] pci 0000:02:00.1: PME# disabled
  343. [    2.517177] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  344. [    2.517195] pci 0000:00:1c.0:   bridge window [mem 0xa0700000-0xa07fffff]
  345. [    2.517202] pci 0000:00:1c.0:   bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
  346. [    2.517313] pci 0000:03:00.0: [14e4:4331] type 0 class 0x000280
  347. [    2.517363] pci 0000:03:00.0: reg 10: [mem 0xa0600000-0xa0603fff 64bit]
  348. [    2.517558] pci 0000:03:00.0: supports D1 D2
  349. [    2.517559] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
  350. [    2.517568] pci 0000:03:00.0: PME# disabled
  351. [    2.519156] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  352. [    2.519172] pci 0000:00:1c.1:   bridge window [mem 0xa0600000-0xa06fffff]
  353. [    2.519264] pci 0000:04:00.0: [11c1:5901] type 0 class 0x000c00
  354. [    2.519301] pci 0000:04:00.0: reg 10: [mem 0xa0500000-0xa0500fff 64bit]
  355. [    2.519443] pci 0000:04:00.0: supports D1 D2
  356. [    2.519445] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  357. [    2.519451] pci 0000:04:00.0: PME# disabled
  358. [    2.521127] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
  359. [    2.521142] pci 0000:00:1c.2:   bridge window [mem 0xa0500000-0xa05fffff]
  360. [    2.521196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  361. [    2.521275] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  362. [    2.521307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
  363. [    2.521347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
  364. [    2.521377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
  365. [    2.521404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
  366. [    2.521485]  pci0000:00: Requesting ACPI _OSC control (0x1d)
  367. [    2.521551]  pci0000:00: ACPI _OSC control (0x1d) granted
  368. [    2.524863] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  369. [    2.524904] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  370. [    2.524942] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  371. [    2.524980] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  372. [    2.525018] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
  373. [    2.525056] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
  374. [    2.525098] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
  375. [    2.525138] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
  376. [    2.525229] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  377. [    2.525237] vgaarb: loaded
  378. [    2.525238] vgaarb: bridge control possible 0000:00:02.0
  379. [    2.525341] SCSI subsystem initialized
  380. [    2.525379] libata version 3.00 loaded.
  381. [    2.525415] usbcore: registered new interface driver usbfs
  382. [    2.525423] usbcore: registered new interface driver hub
  383. [    2.525443] usbcore: registered new device driver usb
  384. [    2.525511] PCI: Using ACPI for IRQ routing
  385. [    2.527036] PCI: pci_cache_line_size set to 64 bytes
  386. [    2.527228] reserve RAM buffer: 000000000008e000 - 000000000008ffff
  387. [    2.527231] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
  388. [    2.527233] reserve RAM buffer: 000000008ad34000 - 000000008bffffff
  389. [    2.527235] reserve RAM buffer: 000000026fe00000 - 000000026fffffff
  390. [    2.527312] NetLabel: Initializing
  391. [    2.527314] NetLabel:  domain hash size = 128
  392. [    2.527315] NetLabel:  protocols = UNLABELED CIPSOv4
  393. [    2.527323] NetLabel:  unlabeled traffic allowed by default
  394. [    2.527363] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  395. [    2.527369] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  396. [    2.529379] Switching to clocksource hpet
  397. [    2.535349] AppArmor: AppArmor Filesystem Enabled
  398. [    2.535371] pnp: PnP ACPI init
  399. [    2.535385] ACPI: bus type pnp registered
  400. [    2.535629] pnp 00:00: [bus 00-ff]
  401. [    2.535631] pnp 00:00: [io  0x0000-0x0cf7 window]
  402. [    2.535633] pnp 00:00: [io  0x0cf8-0x0cff]
  403. [    2.535635] pnp 00:00: [io  0x0d00-0xffff window]
  404. [    2.535637] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  405. [    2.535639] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
  406. [    2.535641] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
  407. [    2.535642] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
  408. [    2.535644] pnp 00:00: [mem 0x000cc000-0x000cffff window]
  409. [    2.535646] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
  410. [    2.535647] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
  411. [    2.535649] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
  412. [    2.535651] pnp 00:00: [mem 0x000dc000-0x000dffff window]
  413. [    2.535653] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
  414. [    2.535654] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
  415. [    2.535656] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
  416. [    2.535658] pnp 00:00: [mem 0x000ec000-0x000effff window]
  417. [    2.535660] pnp 00:00: [mem 0x000f0000-0x000fffff window]
  418. [    2.535661] pnp 00:00: [mem 0x8fa00000-0xfeafffff window]
  419. [    2.535663] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
  420. [    2.535741] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  421. [    2.535824] pnp 00:01: [io  0x0000-0x001f]
  422. [    2.535826] pnp 00:01: [io  0x0081-0x0091]
  423. [    2.535828] pnp 00:01: [io  0x0093-0x009f]
  424. [    2.535829] pnp 00:01: [io  0x00c0-0x00df]
  425. [    2.535831] pnp 00:01: [dma 4]
  426. [    2.535859] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  427. [    2.535866] pnp 00:02: [mem 0xff000000-0xffffffff]
  428. [    2.535893] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  429. [    2.535955] pnp 00:03: [mem 0xfed00000-0xfed003ff]
  430. [    2.536001] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
  431. [    2.536004] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
  432. [    2.536013] pnp 00:04: [io  0x00f0]
  433. [    2.536022] pnp 00:04: [irq 13]
  434. [    2.536051] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  435. [    2.536060] pnp 00:05: [io  0x002e-0x002f]
  436. [    2.536061] pnp 00:05: [io  0x004e-0x004f]
  437. [    2.536063] pnp 00:05: [io  0x0061]
  438. [    2.536064] pnp 00:05: [io  0x0063]
  439. [    2.536065] pnp 00:05: [io  0x0065]
  440. [    2.536067] pnp 00:05: [io  0x0067]
  441. [    2.536068] pnp 00:05: [io  0x0070]
  442. [    2.536069] pnp 00:05: [io  0x0080]
  443. [    2.536071] pnp 00:05: [io  0x0092]
  444. [    2.536072] pnp 00:05: [io  0x00b2-0x00b3]
  445. [    2.536074] pnp 00:05: [io  0x0680-0x069f]
  446. [    2.536075] pnp 00:05: [io  0x1000-0x100f]
  447. [    2.536077] pnp 00:05: [io  0xffff]
  448. [    2.536078] pnp 00:05: [io  0xffff]
  449. [    2.536080] pnp 00:05: [io  0x0400-0x047f]
  450. [    2.536081] pnp 00:05: [io  0x0500-0x057f]
  451. [    2.536083] pnp 00:05: [io  0x164e-0x164f]
  452. [    2.536128] system 00:05: [io  0x0680-0x069f] has been reserved
  453. [    2.536130] system 00:05: [io  0x1000-0x100f] has been reserved
  454. [    2.536132] system 00:05: [io  0xffff] has been reserved
  455. [    2.536134] system 00:05: [io  0xffff] has been reserved
  456. [    2.536136] system 00:05: [io  0x0400-0x047f] has been reserved
  457. [    2.536138] system 00:05: [io  0x0500-0x057f] has been reserved
  458. [    2.536140] system 00:05: [io  0x164e-0x164f] has been reserved
  459. [    2.536142] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  460. [    2.536151] pnp 00:06: [io  0x0070-0x0077]
  461. [    2.536156] pnp 00:06: [irq 8]
  462. [    2.536182] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
  463. [    2.536192] pnp 00:07: [io  0x0300-0x031f]
  464. [    2.536197] pnp 00:07: [irq 6]
  465. [    2.536225] pnp 00:07: Plug and Play ACPI device, IDs APP0001 (active)
  466. [    2.536266] pnp 00:08: [io  0x0700-0x07fe]
  467. [    2.536301] pnp 00:08: Plug and Play ACPI device, IDs APP000b (active)
  468. [    2.536422] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
  469. [    2.536424] pnp 00:09: [mem 0xfed10000-0xfed17fff]
  470. [    2.536425] pnp 00:09: [mem 0xfed18000-0xfed18fff]
  471. [    2.536427] pnp 00:09: [mem 0xfed19000-0xfed19fff]
  472. [    2.536428] pnp 00:09: [mem 0xe0000000-0xefffffff]
  473. [    2.536430] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
  474. [    2.536432] pnp 00:09: [mem 0xfed90000-0xfed93fff]
  475. [    2.536433] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
  476. [    2.536435] pnp 00:09: [mem 0xff000000-0xffffffff]
  477. [    2.536436] pnp 00:09: [mem 0xfee00000-0xfeefffff]
  478. [    2.536438] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
  479. [    2.536487] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
  480. [    2.536489] system 00:09: [mem 0xfed10000-0xfed17fff] could not be reserved
  481. [    2.536492] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
  482. [    2.536494] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
  483. [    2.536496] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
  484. [    2.536498] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
  485. [    2.536501] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
  486. [    2.536503] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
  487. [    2.536505] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
  488. [    2.536507] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
  489. [    2.536510] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  490. [    2.536562] pnp 00:0a: [mem 0x20000000-0x201fffff]
  491. [    2.536564] pnp 00:0a: [mem 0x40000000-0x401fffff]
  492. [    2.536616] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
  493. [    2.536618] system 00:0a: [mem 0x40000000-0x401fffff] has been reserved
  494. [    2.536620] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
  495. [    2.541344] pnp: PnP ACPI: found 11 devices
  496. [    2.541346] ACPI: ACPI bus type pnp unregistered
  497. [    2.548031] PCI: max bus depth: 1 pci_try_num: 2
  498. [    2.548066] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  499. [    2.548069] pci 0000:00:01.0:   bridge window [mem 0xa0800000-0xa08fffff]
  500. [    2.548074] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
  501. [    2.548076] pci 0000:00:01.1:   bridge window [io  0x3000-0x3fff]
  502. [    2.548079] pci 0000:00:01.1:   bridge window [mem 0xa0a00000-0xa4efffff]
  503. [    2.548082] pci 0000:00:01.1:   bridge window [mem 0xa4f00000-0xa8efffff 64bit pref]
  504. [    2.548086] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  505. [    2.548091] pci 0000:00:1c.0:   bridge window [mem 0xa0700000-0xa07fffff]
  506. [    2.548096] pci 0000:00:1c.0:   bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
  507. [    2.548103] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  508. [    2.548108] pci 0000:00:1c.1:   bridge window [mem 0xa0600000-0xa06fffff]
  509. [    2.548117] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
  510. [    2.548122] pci 0000:00:1c.2:   bridge window [mem 0xa0500000-0xa05fffff]
  511. [    2.548134] pci 0000:00:01.0: enabling device (0000 -> 0002)
  512. [    2.548144] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  513. [    2.548148] pci 0000:00:01.0: setting latency timer to 64
  514. [    2.548152] pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  515. [    2.548155] pci 0000:00:01.1: setting latency timer to 64
  516. [    2.548161] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  517. [    2.548166] pci 0000:00:1c.0: setting latency timer to 64
  518. [    2.548187] pci 0000:00:1c.1: power state changed by ACPI to D0
  519. [    2.548192] pci 0000:00:1c.1: power state changed by ACPI to D0
  520. [    2.548201] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  521. [    2.548205] pci 0000:00:1c.1: setting latency timer to 64
  522. [    2.548215] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  523. [    2.548219] pci 0000:00:1c.2: setting latency timer to 64
  524. [    2.548223] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  525. [    2.548225] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  526. [    2.548227] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  527. [    2.548229] pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff]
  528. [    2.548231] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
  529. [    2.548233] pci_bus 0000:01: resource 1 [mem 0xa0800000-0xa08fffff]
  530. [    2.548235] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
  531. [    2.548237] pci_bus 0000:05: resource 1 [mem 0xa0a00000-0xa4efffff]
  532. [    2.548239] pci_bus 0000:05: resource 2 [mem 0xa4f00000-0xa8efffff 64bit pref]
  533. [    2.548241] pci_bus 0000:02: resource 1 [mem 0xa0700000-0xa07fffff]
  534. [    2.548243] pci_bus 0000:02: resource 2 [mem 0xa0400000-0xa04fffff 64bit pref]
  535. [    2.548245] pci_bus 0000:03: resource 1 [mem 0xa0600000-0xa06fffff]
  536. [    2.548247] pci_bus 0000:04: resource 1 [mem 0xa0500000-0xa05fffff]
  537. [    2.548272] NET: Registered protocol family 2
  538. [    2.548496] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
  539. [    2.549483] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  540. [    2.550735] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  541. [    2.550860] TCP: Hash tables configured (established 524288 bind 65536)
  542. [    2.550862] TCP reno registered
  543. [    2.550878] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  544. [    2.550912] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  545. [    2.551000] NET: Registered protocol family 1
  546. [    2.551016] pci 0000:00:02.0: Boot video device
  547. [    2.551393] PCI: CLS 256 bytes, default 64
  548. [    2.551440] Trying to unpack rootfs image as initramfs...
  549. [    2.767407] Freeing initrd memory: 12696k freed
  550. [    2.768906] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  551. [    2.768911] Placing 64MB software IO TLB between ffff880086d29000 - ffff88008ad29000
  552. [    2.768912] software IO TLB at phys 0x86d29000 - 0x8ad29000
  553. [    2.769365] audit: initializing netlink socket (disabled)
  554. [    2.769373] type=2000 audit(1325807893.604:1): initialized
  555. [    2.792445] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  556. [    2.811701] VFS: Disk quotas dquot_6.5.2
  557. [    2.811750] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  558. [    2.812167] fuse init (API version 7.17)
  559. [    2.812245] msgmni has been set to 15532
  560. [    2.812604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  561. [    2.812631] io scheduler noop registered
  562. [    2.812635] io scheduler deadline registered
  563. [    2.812664] io scheduler cfq registered (default)
  564. [    2.812749] pcieport 0000:00:01.0: setting latency timer to 64
  565. [    2.812775] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  566. [    2.812823] pcieport 0000:00:01.1: setting latency timer to 64
  567. [    2.812844] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
  568. [    2.812896] pcieport 0000:00:1c.0: setting latency timer to 64
  569. [    2.812938] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
  570. [    2.813005] pcieport 0000:00:1c.1: setting latency timer to 64
  571. [    2.813047] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
  572. [    2.813112] pcieport 0000:00:1c.2: setting latency timer to 64
  573. [    2.813154] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
  574. [    2.813233] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
  575. [    2.813236] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
  576. [    2.813247] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
  577. [    2.813250] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
  578. [    2.813267] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  579. [    2.813269] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  580. [    2.813270] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
  581. [    2.813275] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  582. [    2.813295] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
  583. [    2.813297] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  584. [    2.813301] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
  585. [    2.813331] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  586. [    2.813333] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
  587. [    2.813338] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  588. [    2.813352] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  589. [    2.813371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  590. [    2.813408] intel_idle: MWAIT substates: 0x21120
  591. [    2.813409] intel_idle: v0.4 model 0x2A
  592. [    2.813410] intel_idle: lapic_timer_reliable_states 0xffffffff
  593. [    2.813477] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  594. [    2.813532] ACPI: AC Adapter [ADP1] (on-line)
  595. [    2.813588] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
  596. [    2.813604] ACPI: Lid Switch [LID0]
  597. [    2.813634] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
  598. [    2.813638] ACPI: Power Button [PWRB]
  599. [    2.813667] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
  600. [    2.813669] ACPI: Sleep Button [SLPB]
  601. [    2.813699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  602. [    2.813701] ACPI: Power Button [PWRF]
  603. [    2.820328] ERST: Table is not found!
  604. [    2.820384] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  605. [    2.929697] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  606. [    2.929702] ACPI: Battery Slot [BAT0] (battery present)
  607. [    3.330846] Linux agpgart interface v0.103
  608. [    3.330915] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
  609. [    3.331048] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  610. [    3.332198] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
  611. [    3.332297] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x90000000
  612. [    3.333405] brd: module loaded
  613. [    3.333989] loop: module loaded
  614. [    3.334084] ata_piix 0000:00:1f.2: version 2.13
  615. [    3.334104] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  616. [    3.334110] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  617. [    3.484409] ata_piix 0000:00:1f.2: setting latency timer to 64
  618. [    3.484648] scsi0 : ata_piix
  619. [    3.484712] scsi1 : ata_piix
  620. [    3.484883] ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x215c bmdma 0x2060 irq 19
  621. [    3.484888] ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x2158 bmdma 0x2068 irq 19
  622. [    3.485152] Fixed MDIO Bus: probed
  623. [    3.485167] tun: Universal TUN/TAP device driver, 1.6
  624. [    3.485169] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  625. [    3.485205] PPP generic driver version 2.4.2
  626. [    3.485284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  627. [    3.485303] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  628. [    3.485327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  629. [    3.485330] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  630. [    3.485366] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  631. [    3.485389] ehci_hcd 0000:00:1a.7: debug port 2
  632. [    3.489257] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
  633. [    3.489271] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xa0906c00
  634. [    3.498331] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  635. [    3.498466] hub 1-0:1.0: USB hub found
  636. [    3.498470] hub 1-0:1.0: 6 ports detected
  637. [    3.498541] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  638. [    3.498552] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  639. [    3.498556] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  640. [    3.498591] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  641. [    3.498611] ehci_hcd 0000:00:1d.7: debug port 2
  642. [    3.502483] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
  643. [    3.502496] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xa0906800
  644. [    3.512308] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  645. [    3.512431] hub 2-0:1.0: USB hub found
  646. [    3.512434] hub 2-0:1.0: 8 ports detected
  647. [    3.512499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  648. [    3.512509] uhci_hcd: USB Universal Host Controller Interface driver
  649. [    3.512527] uhci_hcd 0000:00:1a.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  650. [    3.512532] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  651. [    3.512536] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  652. [    3.512572] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  653. [    3.512605] uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002120
  654. [    3.512699] hub 3-0:1.0: USB hub found
  655. [    3.512702] hub 3-0:1.0: 2 ports detected
  656. [    3.512751] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  657. [    3.512757] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  658. [    3.512760] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  659. [    3.512793] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
  660. [    3.512816] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020c0
  661. [    3.512909] hub 4-0:1.0: USB hub found
  662. [    3.512912] hub 4-0:1.0: 2 ports detected
  663. [    3.512990] i8042: PNP: No PS/2 controller found. Probing ports directly.
  664. [    3.513879] i8042: No controller found
  665. [    3.513937] mousedev: PS/2 mouse device common for all mice
  666. [    3.514112] rtc_cmos 00:06: RTC can wake from S4
  667. [    3.514209] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
  668. [    3.514237] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  669. [    3.514311] device-mapper: uevent: version 1.0.3
  670. [    3.514367] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  671. [    3.514465] cpuidle: using governor ladder
  672. [    3.514617] cpuidle: using governor menu
  673. [    3.514619] EFI Variables Facility v0.08 2004-May-17
  674. [    3.514833] TCP cubic registered
  675. [    3.514914] NET: Registered protocol family 10
  676. [    3.515341] NET: Registered protocol family 17
  677. [    3.515352] Registering the dns_resolver key type
  678. [    3.515467] PM: Hibernation image not present or could not be loaded.
  679. [    3.515476] registered taskstats version 1
  680. [    3.530106]   Magic number: 12:227:1009
  681. [    3.530185] rtc_cmos 00:06: setting system clock to 2012-01-05 23:58:15 UTC (1325807895)
  682. [    3.530713] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  683. [    3.530714] EDD information not available.
  684. [    3.769999] Refined TSC clocksource calibration: 2394.560 MHz.
  685. [    3.770020] Switching to clocksource tsc
  686. [    3.799964] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  687. [    3.914712] hub 1-1:1.0: USB hub found
  688. [    3.914875] hub 1-1:1.0: 3 ports detected
  689. [    4.017631] usb 1-2: new high-speed USB device number 3 using ehci_hcd
  690. [    4.251292] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  691. [    4.366033] hub 2-1:1.0: USB hub found
  692. [    4.366201] hub 2-1:1.0: 2 ports detected
  693. [    4.440250] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
  694. [    4.527550] hub 1-1.1:1.0: USB hub found
  695. [    4.527871] hub 1-1.1:1.0: 3 ports detected
  696. [    4.602008] usb 1-1.2: new full-speed USB device number 5 using ehci_hcd
  697. [    4.769747] usb 1-1.3: new full-speed USB device number 6 using ehci_hcd
  698. [    4.794469] ata1.01: failed to resume link (SControl 0)
  699. [    4.794560] ata2.01: failed to resume link (SControl 0)
  700. [    4.945320] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  701. [    4.945334] ata2.01: SATA link down (SStatus 0 SControl 0)
  702. [    4.945346] ata2.01: link offline, clearing class 3 to NONE
  703. [    4.945564] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  704. [    4.945576] ata1.01: SATA link down (SStatus 0 SControl 0)
  705. [    4.948586] ata2.00: ATAPI: MATSHITADVD-R   UJ-8A8, HB14, max UDMA/100
  706. [    4.948907] ata1.00: ATA-8: Hitachi HTS545050B9A302, PB4AC60Y, max UDMA/133
  707. [    4.948918] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  708. [    4.954625] ata2.00: configured for UDMA/100
  709. [    4.954830] ata1.00: configured for UDMA/133
  710. [    4.955044] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54505 PB4A PQ: 0 ANSI: 5
  711. [    4.955175] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  712. [    4.955204] sd 0:0:0:0: Attached scsi generic sg0 type 0
  713. [    4.955216] sd 0:0:0:0: [sda] Write Protect is off
  714. [    4.955219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  715. [    4.955240] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  716. [    4.959566] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-8A8   HB14 PQ: 0 ANSI: 5
  717. [    4.963170] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
  718. [    4.963179] cdrom: Uniform CD-ROM driver Revision: 3.20
  719. [    4.963279] sr 1:0:0:0: Attached scsi CD-ROM sr0
  720. [    4.963349] sr 1:0:0:0: Attached scsi generic sg1 type 5
  721. [    5.005342]  sda: sda1 sda2 sda3 sda4 sda5 sda6
  722. [    5.005692] sd 0:0:0:0: [sda] Attached SCSI disk
  723. [    5.006679] Freeing unused kernel memory: 896k freed
  724. [    5.006759] Write protecting the kernel read-only data: 12288k
  725. [    5.010796] Freeing unused kernel memory: 1948k freed
  726. [    5.013917] Freeing unused kernel memory: 1420k freed
  727. [    5.026062] udevd[98]: starting version 173
  728. [    5.068068] sdhci: Secure Digital Host Controller Interface driver
  729. [    5.068072] sdhci: Copyright(c) Pierre Ossman
  730. [    5.068395] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
  731. [    5.068445] sdhci-pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  732. [    5.068448] sdhci-pci 0000:02:00.1: Invalid iomem size. You may experience problems.
  733. [    5.068535] sdhci-pci 0000:02:00.1: setting latency timer to 64
  734. [    5.068561] mmc0: no vmmc regulator found
  735. [    5.068632] Registered led device: mmc0::
  736. [    5.069608] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  737. [    5.069618] firewire_ohci 0000:04:00.0: setting latency timer to 64
  738. [    5.069974] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
  739. [    5.075482] usbcore: registered new interface driver usbhid
  740. [    5.075485] usbhid: USB HID core driver
  741. [    5.076925] tg3.c:v3.121 (November 2, 2011)
  742. [    5.077059] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  743. [    5.077099] tg3 0000:02:00.0: setting latency timer to 64
  744. [    5.092447] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input4
  745. [    5.092553] apple 0003:05AC:0252.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input0
  746. [    5.098220] apple 0003:05AC:0252.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input1
  747. [    5.120666] firewire_ohci 0000:04:00.0: irq 45 for MSI/MSI-X
  748. [    5.121028] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x0
  749. [    5.134847] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785100] (PCI Express) MAC address 3c:07:54:41:05:ad
  750. [    5.134851] tg3 0000:02:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
  751. [    5.134854] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
  752. [    5.134856] tg3 0000:02:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
  753. [    5.166496] input: Creative Technology Ltd Sound Blaster Tactic(3D) Alpha as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.3/1-1.3:1.3/input/input5
  754. [    5.167291] generic-usb 0003:041E:30DC.0003: input,hiddev0,hidraw2: USB HID v1.00 Device [Creative Technology Ltd Sound Blaster Tactic(3D) Alpha] on usb-0000:00:1a.7-1.3/input3
  755. [    5.241853] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
  756. [    5.348883] apple 0003:05AC:8242.0004: hiddev0,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.7-1.1/input0
  757. [    5.423580] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
  758. [    5.510341] hub 2-1.2:1.0: USB hub found
  759. [    5.510673] hub 2-1.2:1.0: 4 ports detected
  760. [    5.574351] usb 1-1.1.1: new full-speed USB device number 7 using ehci_hcd
  761. [    5.621213] firewire_core: created device fw0: GUID a4b197fffeba6698, S800
  762. [    5.621223] firewire_core: phy config: card 0, new root=ffc0, gap_count=63
  763. [    5.653396] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6
  764. [    5.653671] generic-usb 0003:05AC:820A.0005: input,hidraw4: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0
  765. [    5.715145] usb 1-1.1.2: new full-speed USB device number 8 using ehci_hcd
  766. [    5.794041] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input7
  767. [    5.794153] generic-usb 0003:05AC:820B.0006: input,hidraw5: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0
  768. [    5.812323] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
  769. [    5.855908] usb 1-1.1.3: new full-speed USB device number 9 using ehci_hcd
  770. [    5.997971] usb 2-1.2.1: new low-speed USB device number 5 using ehci_hcd
  771. [    6.082111] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input8
  772. [    6.082251] generic-usb 0003:413C:3200.0007: input,hidraw6: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.7-1.2.1/input0
  773. [    6.144757] usb 2-1.2.3: new low-speed USB device number 6 using ehci_hcd
  774. [    6.233658] input: Silitek Standard USB Keyboard  as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input9
  775. [    6.233773] generic-usb 0003:047B:0011.0008: input,hidraw7: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:1d.7-1.2.3/input0
  776. [    6.903219] init: ureadahead main process (298) terminated with status 5
  777. [    7.814061] udevd[340]: starting version 173
  778. [    8.160306] Adding 8593744k swap on /dev/sda5.  Priority:-1 extents:1 across:8593744k
  779. [    9.037137] lp: driver loaded but no devices found
  780. [    9.996583] mei: module is from the staging directory, the quality is unknown, you have been warned.
  781. [    9.996867] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  782. [    9.996875] mei 0000:00:16.0: setting latency timer to 64
  783. [    9.996935] mei 0000:00:16.0: irq 46 for MSI/MSI-X
  784. [   10.076182] applesmc: key=379 fan=1 temp=24 acc=1 lux=2 kbd=1
  785. [   10.088300] input: applesmc as /devices/platform/applesmc.768/input/input10
  786. [   10.088403] Registered led device: smc::kbd_backlight
  787. [   10.275869] Disabling lock debugging due to kernel taint
  788. [   10.276284] bcma-pci-bridge 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  789. [   10.276299] bcma-pci-bridge 0000:03:00.0: setting latency timer to 64
  790. [   10.276372] Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0)
  791. [   10.276398] Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0)
  792. [   10.276458] Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0)
  793. [   10.276591] PMU resource config unknown for device 0x4331
  794. [   10.324949] Bus registered
  795. [   11.140694] [drm] Initialized drm 1.1.0 20060810
  796. [   11.295546] input: bcm5974 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.2/input/input11
  797. [   11.295674] usbcore: registered new interface driver bcm5974
  798. [   11.516718] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  799. [   11.516722] i915 0000:00:02.0: setting latency timer to 64
  800. [   11.576316] i915 0000:00:02.0: irq 47 for MSI/MSI-X
  801. [   11.576321] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  802. [   11.576322] [drm] Driver supports precise vblank timestamp query.
  803. [   11.576365] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
  804. [   11.576382] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  805. [   11.608112] Linux video capture interface: v2.00
  806. [   11.798199] Bluetooth: Core ver 2.16
  807. [   11.798224] NET: Registered protocol family 31
  808. [   11.798226] Bluetooth: HCI device and connection manager initialized
  809. [   11.798229] Bluetooth: HCI socket layer initialized
  810. [   11.798231] Bluetooth: L2CAP socket layer initialized
  811. [   11.798238] Bluetooth: SCO socket layer initialized
  812. [   11.806511] Bluetooth: Generic Bluetooth USB driver ver 0.6
  813. [   11.806742] usbcore: registered new interface driver btusb
  814. [   11.857040] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8509)
  815. [   11.863998] input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
  816. [   11.864175] usbcore: registered new interface driver uvcvideo
  817. [   11.864178] USB Video Class driver (1.1.1)
  818. [   11.900562] type=1400 audit(1325807903.881:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=517 comm="apparmor_parser"
  819. [   11.900603] type=1400 audit(1325807903.881:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=517 comm="apparmor_parser"
  820. [   11.900635] type=1400 audit(1325807903.881:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=517 comm="apparmor_parser"
  821. [   11.912919] type=1400 audit(1325807903.894:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=536 comm="apparmor_parser"
  822. [   11.912961] type=1400 audit(1325807903.894:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=536 comm="apparmor_parser"
  823. [   11.912993] type=1400 audit(1325807903.894:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=536 comm="apparmor_parser"
  824. [   11.931077] usb 1-1.1.1: USB disconnect, device number 7
  825. [   12.100936] usb 1-1.1.2: USB disconnect, device number 8
  826. [   12.137810] usbcore: registered new interface driver snd-usb-audio
  827. [   12.285899] fbcon: inteldrmfb (fb0) is primary device
  828. [   12.604986] Console: switching to colour frame buffer device 160x50
  829. [   12.606982] fb0: inteldrmfb frame buffer device
  830. [   12.606983] drm: registered panic notifier
  831. [   12.620487] acpi device:11: registered as cooling_device4
  832. [   12.620668] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
  833. [   12.620741] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
  834. [   12.620799] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  835. [   12.620844] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  836. [   12.620940] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
  837. [   12.620969] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
  838. [   13.293733] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  839. [   13.293897] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
  840. [   13.294062] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
  841. [   13.294207] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
  842. [   13.294282] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
  843. [   13.294335] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
  844. [   14.951801] cfg80211: Calling CRDA to update world regulatory domain
  845. [   15.516309] cfg80211: World regulatory domain updated:
  846. [   15.516312] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  847. [   15.516315] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  848. [   15.516317] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  849. [   15.516319] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  850. [   15.516320] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  851. [   15.516322] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  852. [   17.129416] b43-phy0: Broadcom 4331 WLAN found (core revision 29)
  853. [   17.129880] b43-phy0 debug: Found PHY: Analog 9, Type 7, Revision 1
  854. [   17.129892] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2059, Revision 0
  855. [   17.130147] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  856. [   17.130150] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  857. [   17.130153] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  858. [   17.130156] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  859. [   17.130159] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  860. [   17.130162] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  861. [   17.130164] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  862. [   17.130167] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  863. [   17.130170] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  864. [   17.130171] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  865. [   17.130173] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  866. [   17.130175] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  867. [   17.130176] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  868. [   17.130178] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  869. [   17.130179] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  870. [   17.130181] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  871. [   17.130183] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  872. [   17.130185] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  873. [   17.130186] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  874. [   17.130188] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  875. [   17.130189] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  876. [   17.130191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  877. [   17.130192] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  878. [   17.130194] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  879. [   17.130196] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  880. [   17.130198] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  881. [   17.130199] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  882. [   17.130201] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  883. [   17.181377] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  884. [   17.181820] Broadcom 43xx driver loaded [ Features: PMNLS ]
  885. [   17.610770] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
  886. [   17.761808] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
  887. [   18.216964] RPC: Registered named UNIX socket transport module.
  888. [   18.216967] RPC: Registered udp transport module.
  889. [   18.216968] RPC: Registered tcp transport module.
  890. [   18.216969] RPC: Registered tcp NFSv4.1 backchannel transport module.
  891. [   18.650039] FS-Cache: Loaded
  892. [   19.010142] type=1400 audit(1325807911.001:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1207 comm="apparmor_parser"
  893. [   19.037340] FS-Cache: Netfs 'nfs' registered for caching
  894. [   19.074288] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  895. [   19.138835] type=1400 audit(1325807911.130:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1208 comm="apparmor_parser"
  896. [   19.138892] type=1400 audit(1325807911.130:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1208 comm="apparmor_parser"
  897. [   19.138941] type=1400 audit(1325807911.130:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1208 comm="apparmor_parser"
  898. [   19.398196] type=1400 audit(1325807911.390:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1211 comm="apparmor_parser"
  899. [   19.398340] type=1400 audit(1325807911.390:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1211 comm="apparmor_parser"
  900. [   19.537235] type=1400 audit(1325807911.529:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1212 comm="apparmor_parser"
  901. [   19.537354] type=1400 audit(1325807911.529:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1212 comm="apparmor_parser"
  902. [   19.681841] type=1400 audit(1325807911.674:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1220 comm="apparmor_parser"
  903. [   19.792218] ppdev: user-space parallel port driver
  904. [   20.236787] type=1400 audit(1325807912.230:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1244 comm="apparmor_parser"
  905. [   23.180840] init: failsafe main process (1163) killed by TERM signal
  906. [   23.278133] init: apport pre-start process (1286) terminated with status 1
  907. [   23.280242] init: apport post-stop process (1312) terminated with status 1
  908. [   24.587393] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
  909. [   24.598358] NFSD: starting 90-second grace period
  910. [   33.917883] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0
  911. [   35.042383] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  912. [   35.071392] b43-phy0 debug: Chip initialized
  913. [   35.071501] b43-phy0 debug: 64-bit DMA initialized
  914. [   35.071575] b43-phy0 debug: QoS enabled
  915. [   35.072192] b43-phy0 debug: Wireless interface started
  916. [   35.081375] b43-phy0 debug: Adding Interface type 2
  917. [   35.081776] ieee80211 phy0: device now idle
  918. [   35.082300] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  919. [   36.183215] EXT4-fs (sda6): re-mounted. Opts: commit=0
  920. [   36.211205] ieee80211 phy0: device no longer idle - scanning
  921. [   37.364958] ieee80211 phy0: device now idle
  922. [   37.380922] init: plymouth-stop pre-start process (1785) terminated with status 1
  923. [   40.121785] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
  924. [   40.121791] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
  925. [   40.121795] tg3 0000:02:00.0: irq 51 for MSI/MSI-X
  926. [   40.121799] tg3 0000:02:00.0: irq 52 for MSI/MSI-X
  927. [   40.121802] tg3 0000:02:00.0: irq 53 for MSI/MSI-X
  928. [   41.152024] ADDRCONF(NETDEV_UP): eth0: link is not ready
  929. [   43.184298] ieee80211 phy0: device no longer idle - scanning
  930. [   44.342569] ieee80211 phy0: device now idle
  931. [   45.114165] ieee80211 phy0: device no longer idle - scanning
  932. [   46.270695] ieee80211 phy0: device now idle
  933. [   50.113741] ieee80211 phy0: device no longer idle - scanning
  934. [   51.269251] ieee80211 phy0: device now idle
  935. [   55.106575] ieee80211 phy0: device no longer idle - scanning
  936. [   56.258822] ieee80211 phy0: device now idle
  937. [  254.847600] ieee80211 phy0: device no longer idle - scanning
  938. [  255.999366] ieee80211 phy0: device now idle
  939. [  459.539768] ieee80211 phy0: device no longer idle - scanning
  940. [  460.696494] ieee80211 phy0: device now idle
  941. [  664.229283] ieee80211 phy0: device no longer idle - scanning
  942. [  665.386646] ieee80211 phy0: device now idle
  943. [  729.709962] ieee80211 phy0: device no longer idle - scanning
  944. [  730.860053] ieee80211 phy0: device now idle
  945. [  741.309417] b43-phy0 debug: Removing Interface type 2
  946. [  741.309573] b43-phy0 debug: Wireless interface stopped
  947. [  741.309735] b43-phy0 debug: DMA-64 rx_ring: Used slots 1/64, Failed frames 0/0 = 0.0%, Average tries 0.00
  948. [  741.309773] b43-phy0 debug: DMA-64 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  949. [  741.311415] b43-phy0 debug: DMA-64 tx_ring_AC_BE: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  950. [  741.313409] b43-phy0 debug: DMA-64 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  951. [  741.315408] b43-phy0 debug: DMA-64 tx_ring_AC_VO: Used slots 2/256, Failed frames 0/99 = 0.0%, Average tries 0.92
  952. [  741.317412] b43-phy0 debug: DMA-64 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  953. [  741.477291] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  954. [  741.506184] b43-phy0 debug: Chip initialized
  955. [  741.506310] b43-phy0 debug: 64-bit DMA initialized
  956. [  741.506403] b43-phy0 debug: QoS enabled
  957. [  741.507273] b43-phy0 debug: Wireless interface started
  958. [  741.516148] b43-phy0 debug: Adding Interface type 2
  959. [  741.517305] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  960. [  744.144444] tg3 0000:02:00.0: irq 49 for MSI/MSI-X
  961. [  744.144453] tg3 0000:02:00.0: irq 50 for MSI/MSI-X
  962. [  744.144459] tg3 0000:02:00.0: irq 51 for MSI/MSI-X
  963. [  744.144465] tg3 0000:02:00.0: irq 52 for MSI/MSI-X
  964. [  744.144471] tg3 0000:02:00.0: irq 53 for MSI/MSI-X
  965. [  745.173917] ADDRCONF(NETDEV_UP): eth0: link is not ready
  966. [  745.229558] b43-phy0 debug: Removing Interface type 2
  967. [  745.231583] b43-phy0 debug: Wireless interface stopped
  968. [  745.232015] b43-phy0 debug: DMA-64 rx_ring: Used slots 2/64, Failed frames 0/0 = 0.0%, Average tries 0.00
  969. [  745.232051] b43-phy0 debug: DMA-64 tx_ring_AC_BK: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  970. [  745.234586] b43-phy0 debug: DMA-64 tx_ring_AC_BE: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  971. [  745.236562] b43-phy0 debug: DMA-64 tx_ring_AC_VI: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  972. [  745.238583] b43-phy0 debug: DMA-64 tx_ring_AC_VO: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  973. [  745.240541] b43-phy0 debug: DMA-64 tx_ring_mcast: Used slots 0/256, Failed frames 0/0 = 0.0%, Average tries 0.00
  974. [  745.491303] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
  975. [  745.520178] b43-phy0 debug: Chip initialized
  976. [  745.520296] b43-phy0 debug: 64-bit DMA initialized
  977. [  745.520370] b43-phy0 debug: QoS enabled
  978. [  745.521044] b43-phy0 debug: Wireless interface started
  979. [  745.530194] b43-phy0 debug: Adding Interface type 2
  980. [  745.531493] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  981. [  747.665190] ieee80211 phy0: device no longer idle - scanning
  982. [  748.821400] ieee80211 phy0: device now idle
  983. [  748.821500] ieee80211 phy0: device no longer idle - scanning
  984. [  748.892270] ieee80211 phy0: device now idle
  985. [  748.892358] ieee80211 phy0: device no longer idle - working
  986. [  748.892400] wlan0: authenticate with 00:1a:dd:b8:40:21 (try 1)
  987. [  748.894657] wlan0: authenticated
  988. [  748.894869] ieee80211 phy0: device now idle
  989. [  748.894925] ieee80211 phy0: Allocated STA 00:1a:dd:b8:40:21
  990. [  748.894928] ieee80211 phy0: Inserted dummy STA 00:1a:dd:b8:40:21
  991. [  748.895025] ieee80211 phy0: device no longer idle - working
  992. [  748.895078] wlan0: associate with 00:1a:dd:b8:40:21 (try 1)
  993. [  748.896999] wlan0: RX AssocResp from 00:1a:dd:b8:40:21 (capab=0x431 status=0 aid=4)
  994. [  748.897001] wlan0: associated
  995. [  748.897004] wlan0: moving STA 00:1a:dd:b8:40:21 to state 1
  996. [  748.897016] wlan0: moving STA 00:1a:dd:b8:40:21 to state 2
  997. [  748.897019] wlan0: moving STA 00:1a:dd:b8:40:21 to state 3
  998. [  748.897021] wlan0: No basic rates in AssocResp. Using min supported rate instead.
  999. [  748.897111] ieee80211 phy0: Inserted STA 00:1a:dd:b8:40:21
  1000. [  748.897834] b43-phy0 ERROR: PHY transmission error
  1001. [  748.898413] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1002. [  748.898485] cfg80211: Calling CRDA for country: US
  1003. [  748.901500] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  1004. [  748.901506] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1005. [  748.901509] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  1006. [  748.901512] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1007. [  748.901515] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  1008. [  748.901518] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1009. [  748.901521] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  1010. [  748.901524] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1011. [  748.901526] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  1012. [  748.901529] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1013. [  748.901531] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  1014. [  748.901535] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1015. [  748.901537] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  1016. [  748.901540] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1017. [  748.901542] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  1018. [  748.901545] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1019. [  748.901548] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  1020. [  748.901551] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1021. [  748.901553] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  1022. [  748.901556] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1023. [  748.901559] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  1024. [  748.901562] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1025. [  748.901564] cfg80211: Disabling freq 2467 MHz
  1026. [  748.901566] cfg80211: Disabling freq 2472 MHz
  1027. [  748.901568] cfg80211: Disabling freq 2484 MHz
  1028. [  748.901571] cfg80211: Regulatory domain changed to country: US
  1029. [  748.901573] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1030. [  748.901576] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1031. [  748.901579] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  1032. [  748.901581] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1033. [  748.901584] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1034. [  748.901587] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1035. [  748.901589] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  1036. [  748.904175] b43-phy0 ERROR: PHY transmission error
  1037. [  748.904330] b43-phy0 ERROR: PHY transmission error
  1038. [  749.705050] b43-phy0 ERROR: PHY transmission error
  1039. [  749.754829] wlan0: detected beacon loss from AP - sending probe request
  1040. [  749.754969] b43-phy0 ERROR: PHY transmission error
  1041. [  749.924186] b43-phy0 ERROR: PHY transmission error
  1042. [  750.705609] b43-phy0 ERROR: PHY transmission error
  1043. [  750.707550] b43-phy0 ERROR: PHY transmission error
  1044. [  750.745368] wlan0: detected beacon loss from AP - sending probe request
  1045. [  751.899102] wlan0: disassociated from 00:1a:dd:b8:40:21 (Reason: 2)
  1046. [  751.899553] wlan0: moving STA 00:1a:dd:b8:40:21 to state 2
  1047. [  751.899555] wlan0: moving STA 00:1a:dd:b8:40:21 to state 1
  1048. [  751.899558] wlan0: moving STA 00:1a:dd:b8:40:21 to state 0
  1049. [  751.907620] ieee80211 phy0: Removed STA 00:1a:dd:b8:40:21
  1050. [  751.907683] ieee80211 phy0: Destroyed STA 00:1a:dd:b8:40:21
  1051. [  751.907980] ieee80211 phy0: device now idle
  1052. [  751.908028] wlan0: deauthenticating from 00:1a:dd:b8:40:21 by local choice (reason=3)
  1053. [  751.908064] cfg80211: All devices are disconnected, going to restore regulatory settings
  1054. [  751.908069] cfg80211: Restoring regulatory settings
  1055. [  751.908075] cfg80211: Calling CRDA to update world regulatory domain
  1056. [  751.911546] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  1057. [  751.911551] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1058. [  751.911554] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  1059. [  751.911557] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1060. [  751.911560] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  1061. [  751.911563] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1062. [  751.911565] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  1063. [  751.911568] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1064. [  751.911571] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  1065. [  751.911574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1066. [  751.911576] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  1067. [  751.911579] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1068. [  751.911582] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  1069. [  751.911585] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1070. [  751.911587] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  1071. [  751.911626] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1072. [  751.911632] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  1073. [  751.911639] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1074. [  751.911644] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  1075. [  751.911649] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1076. [  751.911654] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  1077. [  751.911659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1078. [  751.911664] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  1079. [  751.911669] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1080. [  751.911674] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  1081. [  751.911679] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1082. [  751.911694] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  1083. [  751.911697] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1084. [  751.911701] cfg80211: World regulatory domain updated:
  1085. [  751.911703] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1086. [  751.911706] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1087. [  751.911709] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1088. [  751.911712] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1089. [  751.911716] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1090. [  751.911719] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1091. [  752.008171] ieee80211 phy0: device no longer idle - scanning
  1092. [  753.167871] ieee80211 phy0: device now idle
  1093. [  753.167975] ieee80211 phy0: device no longer idle - working
  1094. [  753.168029] wlan0: authenticate with 00:1a:dd:b8:40:21 (try 1)
  1095. [  753.169518] wlan0: authenticated
  1096. [  753.169751] ieee80211 phy0: device now idle
  1097. [  753.169817] ieee80211 phy0: Allocated STA 00:1a:dd:b8:40:21
  1098. [  753.169824] ieee80211 phy0: Inserted dummy STA 00:1a:dd:b8:40:21
  1099. [  753.169920] ieee80211 phy0: device no longer idle - working
  1100. [  753.169963] wlan0: associate with 00:1a:dd:b8:40:21 (try 1)
  1101. [  753.171740] wlan0: RX AssocResp from 00:1a:dd:b8:40:21 (capab=0x431 status=0 aid=4)
  1102. [  753.171744] wlan0: associated
  1103. [  753.171748] wlan0: moving STA 00:1a:dd:b8:40:21 to state 1
  1104. [  753.171750] wlan0: moving STA 00:1a:dd:b8:40:21 to state 2
  1105. [  753.171752] wlan0: moving STA 00:1a:dd:b8:40:21 to state 3
  1106. [  753.171754] wlan0: No basic rates in AssocResp. Using min supported rate instead.
  1107. [  753.171805] ieee80211 phy0: Inserted STA 00:1a:dd:b8:40:21
  1108. [  753.172916] cfg80211: Calling CRDA for country: US
  1109. [  753.176186] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  1110. [  753.176191] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1111. [  753.176194] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  1112. [  753.176198] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1113. [  753.176200] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  1114. [  753.176203] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1115. [  753.176206] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  1116. [  753.176209] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1117. [  753.176211] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  1118. [  753.176215] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1119. [  753.176217] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  1120. [  753.176220] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1121. [  753.176223] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  1122. [  753.176226] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1123. [  753.176228] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  1124. [  753.176231] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1125. [  753.176233] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  1126. [  753.176236] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1127. [  753.176239] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  1128. [  753.176242] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1129. [  753.176244] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  1130. [  753.176247] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1131. [  753.176249] cfg80211: Disabling freq 2467 MHz
  1132. [  753.176251] cfg80211: Disabling freq 2472 MHz
  1133. [  753.176253] cfg80211: Disabling freq 2484 MHz
  1134. [  753.176256] cfg80211: Regulatory domain changed to country: US
  1135. [  753.176259] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1136. [  753.176262] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1137. [  753.176264] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  1138. [  753.176267] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1139. [  753.176270] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1140. [  753.176272] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1141. [  753.176275] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  1142. [  754.194251] net_ratelimit: 13 callbacks suppressed
  1143. [  754.194256] b43-phy0 ERROR: PHY transmission error
  1144. [  754.366188] b43-phy0 ERROR: PHY transmission error
  1145. [  754.708424] b43-phy0 ERROR: PHY transmission error
  1146. [  754.751389] wlan0: detected beacon loss from AP - sending probe request
  1147. [  754.751565] b43-phy0 ERROR: PHY transmission error
  1148. [  755.021712] b43-phy0 ERROR: PHY transmission error
  1149. [  755.193955] b43-phy0 ERROR: PHY transmission error
  1150. [  756.195231] wlan0: disassociated from 00:1a:dd:b8:40:21 (Reason: 2)
  1151. [  756.195689] wlan0: moving STA 00:1a:dd:b8:40:21 to state 2
  1152. [  756.195692] wlan0: moving STA 00:1a:dd:b8:40:21 to state 1
  1153. [  756.195694] wlan0: moving STA 00:1a:dd:b8:40:21 to state 0
  1154. [  756.204218] ieee80211 phy0: Removed STA 00:1a:dd:b8:40:21
  1155. [  756.204282] ieee80211 phy0: Destroyed STA 00:1a:dd:b8:40:21
  1156. [  756.204345] ieee80211 phy0: device now idle
  1157. [  756.204396] wlan0: deauthenticating from 00:1a:dd:b8:40:21 by local choice (reason=3)
  1158. [  756.204442] cfg80211: All devices are disconnected, going to restore regulatory settings
  1159. [  756.204447] cfg80211: Restoring regulatory settings
  1160. [  756.204453] cfg80211: Calling CRDA to update world regulatory domain
  1161. [  756.208540] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  1162. [  756.208545] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1163. [  756.208548] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  1164. [  756.208552] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1165. [  756.208554] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  1166. [  756.208557] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1167. [  756.208560] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  1168. [  756.208563] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1169. [  756.208565] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  1170. [  756.208569] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1171. [  756.208571] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  1172. [  756.208575] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1173. [  756.208578] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  1174. [  756.208581] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1175. [  756.208583] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  1176. [  756.208586] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1177. [  756.208589] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  1178. [  756.208592] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1179. [  756.208594] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  1180. [  756.208597] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1181. [  756.208600] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  1182. [  756.208603] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1183. [  756.208605] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  1184. [  756.208608] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1185. [  756.208611] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  1186. [  756.208614] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1187. [  756.208617] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  1188. [  756.208620] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1189. [  756.208624] cfg80211: World regulatory domain updated:
  1190. [  756.208626] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1191. [  756.208629] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1192. [  756.208631] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1193. [  756.208634] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1194. [  756.208637] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1195. [  756.208640] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1196. [  756.316096] ieee80211 phy0: device no longer idle - scanning
  1197. [  757.477452] ieee80211 phy0: device now idle
  1198. [  757.477554] ieee80211 phy0: device no longer idle - working
  1199. [  757.477613] wlan0: authenticate with 00:1a:dd:b8:40:21 (try 1)
  1200. [  757.484116] wlan0: authenticated
  1201. [  757.484333] ieee80211 phy0: device now idle
  1202. [  757.484385] ieee80211 phy0: Allocated STA 00:1a:dd:b8:40:21
  1203. [  757.484388] ieee80211 phy0: Inserted dummy STA 00:1a:dd:b8:40:21
  1204. [  757.484476] ieee80211 phy0: device no longer idle - working
  1205. [  757.484520] wlan0: associate with 00:1a:dd:b8:40:21 (try 1)
  1206. [  757.490490] wlan0: RX AssocResp from 00:1a:dd:b8:40:21 (capab=0x431 status=0 aid=4)
  1207. [  757.490495] wlan0: associated
  1208. [  757.490498] wlan0: moving STA 00:1a:dd:b8:40:21 to state 1
  1209. [  757.490501] wlan0: moving STA 00:1a:dd:b8:40:21 to state 2
  1210. [  757.490503] wlan0: moving STA 00:1a:dd:b8:40:21 to state 3
  1211. [  757.490750] ieee80211 phy0: Inserted STA 00:1a:dd:b8:40:21
  1212. [  757.490755] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0
  1213. [  757.490825] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0
  1214. [  757.490875] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0
  1215. [  757.490925] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0
  1216. [  757.491852] cfg80211: Calling CRDA for country: US
  1217. [  757.495244] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  1218. [  757.495250] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1219. [  757.495253] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  1220. [  757.495256] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1221. [  757.495259] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  1222. [  757.495262] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1223. [  757.495264] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  1224. [  757.495267] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1225. [  757.495270] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  1226. [  757.495285] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1227. [  757.495288] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  1228. [  757.495292] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1229. [  757.495297] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  1230. [  757.495303] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1231. [  757.495308] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  1232. [  757.495313] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1233. [  757.495317] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  1234. [  757.495323] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1235. [  757.495327] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  1236. [  757.495333] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1237. [  757.495337] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  1238. [  757.495342] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1239. [  757.495347] cfg80211: Disabling freq 2467 MHz
  1240. [  757.495351] cfg80211: Disabling freq 2472 MHz
  1241. [  757.495354] cfg80211: Disabling freq 2484 MHz
  1242. [  757.495359] cfg80211: Regulatory domain changed to country: US
  1243. [  757.495363] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1244. [  757.495368] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1245. [  757.495374] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  1246. [  757.495378] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1247. [  757.495383] cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1248. [  757.495389] cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1249. [  757.495394] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  1250. [  758.499190] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: 00:1a:dd:b8:40:21
  1251. [  758.708458] audit_printk_skb: 12 callbacks suppressed
  1252. [  758.708464] type=1400 audit(1325808651.801:22): apparmor="DENIED" operation="open" parent=2881 profile="/sbin/dhclient" name="/var/lib/wicd/dhclient.conf" pid=2978 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
  1253. [  758.741452] wlan0: detected beacon loss from AP - sending probe request
  1254. [  759.709988] wlan0: no IPv6 routers present
  1255. [  759.739986] wlan0: detected beacon loss from AP - sending probe request
  1256. [  760.738468] wlan0: detected beacon loss from AP - sending probe request
  1257. [  761.737011] wlan0: detected beacon loss from AP - sending probe request
  1258. [  762.735527] wlan0: detected beacon loss from AP - sending probe request
  1259. [  763.730041] wlan0: detected beacon loss from AP - sending probe request
  1260. [  764.732549] wlan0: detected beacon loss from AP - sending probe request
  1261. [  765.731038] wlan0: detected beacon loss from AP - sending probe request
  1262. [  766.729577] wlan0: detected beacon loss from AP - sending probe request
  1263. [  767.728087] wlan0: detected beacon loss from AP - sending probe request
  1264. [  768.726626] wlan0: detected beacon loss from AP - sending probe request
  1265. [  769.725114] wlan0: detected beacon loss from AP - sending probe request
  1266. [  770.723605] wlan0: detected beacon loss from AP - sending probe request
  1267. [  771.722116] wlan0: detected beacon loss from AP - sending probe request
  1268. [  772.720620] wlan0: detected beacon loss from AP - sending probe request
  1269. [  773.719141] wlan0: detected beacon loss from AP - sending probe request
  1270. [  774.717649] wlan0: detected beacon loss from AP - sending probe request
  1271. [  775.708167] wlan0: detected beacon loss from AP - sending probe request
  1272. [  776.714702] wlan0: detected beacon loss from AP - sending probe request
  1273. [  777.713216] wlan0: detected beacon loss from AP - sending probe request
  1274. [  778.711732] wlan0: detected beacon loss from AP - sending probe request
  1275. [  779.710244] wlan0: detected beacon loss from AP - sending probe request
  1276. [  780.708754] wlan0: detected beacon loss from AP - sending probe request
  1277. [  781.707266] wlan0: detected beacon loss from AP - sending probe request
  1278. [  782.206516] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1279. [  783.704288] wlan0: detected beacon loss from AP - sending probe request
  1280. [  784.702848] wlan0: detected beacon loss from AP - sending probe request
  1281. [  785.701323] wlan0: detected beacon loss from AP - sending probe request
  1282. [  786.699801] wlan0: detected beacon loss from AP - sending probe request
  1283. [  787.694307] wlan0: detected beacon loss from AP - sending probe request
  1284. [  787.983549] CPU1: Package power limit notification (total events = 1)
  1285. [  787.983554] CPU2: Package power limit notification (total events = 1)
  1286. [  787.983557] CPU3: Package power limit notification (total events = 1)
  1287. [  787.983560] CPU0: Package power limit notification (total events = 1)
  1288. [  787.996521] CPU3: Package power limit normal
  1289. [  787.996524] CPU1: Package power limit normal
  1290. [  787.996527] CPU2: Package power limit normal
  1291. [  787.996530] CPU0: Package power limit normal
  1292. [  788.698815] wlan0: detected beacon loss from AP - sending probe request
  1293. [  789.691357] wlan0: detected beacon loss from AP - sending probe request
  1294. [  790.685873] wlan0: detected beacon loss from AP - sending probe request
  1295. [  791.692393] wlan0: detected beacon loss from AP - sending probe request
  1296. [  792.690905] wlan0: detected beacon loss from AP - sending probe request
  1297. [  793.689388] wlan0: detected beacon loss from AP - sending probe request
  1298. [  794.188655] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1299. [  795.686429] wlan0: detected beacon loss from AP - sending probe request
  1300. [  796.684940] wlan0: detected beacon loss from AP - sending probe request
  1301. [  797.679475] wlan0: detected beacon loss from AP - sending probe request
  1302. [  798.681966] wlan0: detected beacon loss from AP - sending probe request
  1303. [  799.680467] wlan0: detected beacon loss from AP - sending probe request
  1304. [  800.678984] wlan0: detected beacon loss from AP - sending probe request
  1305. [  801.669510] wlan0: detected beacon loss from AP - sending probe request
  1306. [  802.676022] wlan0: detected beacon loss from AP - sending probe request
  1307. [  803.674546] wlan0: detected beacon loss from AP - sending probe request
  1308. [  804.673059] wlan0: detected beacon loss from AP - sending probe request
  1309. [  805.671536] wlan0: detected beacon loss from AP - sending probe request
  1310. [  806.666091] wlan0: detected beacon loss from AP - sending probe request
  1311. [  807.668631] wlan0: detected beacon loss from AP - sending probe request
  1312. [  808.667115] wlan0: detected beacon loss from AP - sending probe request
  1313. [  809.665618] wlan0: detected beacon loss from AP - sending probe request
  1314. [  810.664142] wlan0: detected beacon loss from AP - sending probe request
  1315. [  811.662651] wlan0: detected beacon loss from AP - sending probe request
  1316. [  812.657170] wlan0: detected beacon loss from AP - sending probe request
  1317. [  813.659676] wlan0: detected beacon loss from AP - sending probe request
  1318. [  814.658190] wlan0: detected beacon loss from AP - sending probe request
  1319. [  815.656700] wlan0: detected beacon loss from AP - sending probe request
  1320. [  816.655219] wlan0: detected beacon loss from AP - sending probe request
  1321. [  817.653693] wlan0: detected beacon loss from AP - sending probe request
  1322. [  818.652234] wlan0: detected beacon loss from AP - sending probe request
  1323. [  819.650755] wlan0: detected beacon loss from AP - sending probe request
  1324. [  820.649265] wlan0: detected beacon loss from AP - sending probe request
  1325. [  821.647777] wlan0: detected beacon loss from AP - sending probe request
  1326. [  822.646294] wlan0: detected beacon loss from AP - sending probe request
  1327. [  823.644781] wlan0: detected beacon loss from AP - sending probe request
  1328. [  824.643317] wlan0: detected beacon loss from AP - sending probe request
  1329. [  825.633818] wlan0: detected beacon loss from AP - sending probe request
  1330. [  826.640342] wlan0: detected beacon loss from AP - sending probe request
  1331. [  827.638855] wlan0: detected beacon loss from AP - sending probe request
  1332. [  828.637414] wlan0: detected beacon loss from AP - sending probe request
  1333. [  829.635883] wlan0: detected beacon loss from AP - sending probe request
  1334. [  830.634397] wlan0: detected beacon loss from AP - sending probe request
  1335. [  831.632906] wlan0: detected beacon loss from AP - sending probe request
  1336. [  832.631420] wlan0: detected beacon loss from AP - sending probe request
  1337. [  833.629930] wlan0: detected beacon loss from AP - sending probe request
  1338. [  834.628441] wlan0: detected beacon loss from AP - sending probe request
  1339. [  835.622964] wlan0: detected beacon loss from AP - sending probe request
  1340. [  836.625447] wlan0: detected beacon loss from AP - sending probe request
  1341. [  837.623985] wlan0: detected beacon loss from AP - sending probe request
  1342. [  838.622497] wlan0: detected beacon loss from AP - sending probe request
  1343. [  839.621010] wlan0: detected beacon loss from AP - sending probe request
  1344. [  840.619519] wlan0: detected beacon loss from AP - sending probe request
  1345. [  841.618036] wlan0: detected beacon loss from AP - sending probe request
  1346. [  842.616545] wlan0: detected beacon loss from AP - sending probe request
  1347. [  843.615037] wlan0: detected beacon loss from AP - sending probe request
  1348. [  844.613572] wlan0: detected beacon loss from AP - sending probe request
  1349. [  845.112808] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1350. [  845.612091] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 2/5
  1351. [  846.610660] wlan0: detected beacon loss from AP - sending probe request
  1352. [  847.609112] wlan0: detected beacon loss from AP - sending probe request
  1353. [  848.607623] wlan0: detected beacon loss from AP - sending probe request
  1354. [  849.606138] wlan0: detected beacon loss from AP - sending probe request
  1355. [  850.604653] wlan0: detected beacon loss from AP - sending probe request
  1356. [  851.603162] wlan0: detected beacon loss from AP - sending probe request
  1357. [  852.601675] wlan0: detected beacon loss from AP - sending probe request
  1358. [  853.600238] wlan0: detected beacon loss from AP - sending probe request
  1359. [  854.598699] wlan0: detected beacon loss from AP - sending probe request
  1360. [  855.597213] wlan0: detected beacon loss from AP - sending probe request
  1361. [  856.595703] wlan0: detected beacon loss from AP - sending probe request
  1362. [  857.594236] wlan0: detected beacon loss from AP - sending probe request
  1363. [  858.592750] wlan0: detected beacon loss from AP - sending probe request
  1364. [  859.591241] wlan0: detected beacon loss from AP - sending probe request
  1365. [  860.581771] wlan0: detected beacon loss from AP - sending probe request
  1366. [  861.588289] wlan0: detected beacon loss from AP - sending probe request
  1367. [  862.586778] wlan0: detected beacon loss from AP - sending probe request
  1368. [  863.585289] wlan0: detected beacon loss from AP - sending probe request
  1369. [  864.583872] wlan0: detected beacon loss from AP - sending probe request
  1370. [  865.574324] wlan0: detected beacon loss from AP - sending probe request
  1371. [  866.580823] wlan0: detected beacon loss from AP - sending probe request
  1372. [  867.579347] wlan0: detected beacon loss from AP - sending probe request
  1373. [  868.577878] wlan0: detected beacon loss from AP - sending probe request
  1374. [  869.576356] wlan0: detected beacon loss from AP - sending probe request
  1375. [  870.574868] wlan0: detected beacon loss from AP - sending probe request
  1376. [  871.573392] wlan0: detected beacon loss from AP - sending probe request
  1377. [  872.571907] wlan0: detected beacon loss from AP - sending probe request
  1378. [  873.570437] wlan0: detected beacon loss from AP - sending probe request
  1379. [  874.568920] wlan0: detected beacon loss from AP - sending probe request
  1380. [  875.567517] wlan0: detected beacon loss from AP - sending probe request
  1381. [  876.565959] wlan0: detected beacon loss from AP - sending probe request
  1382. [  877.556478] wlan0: detected beacon loss from AP - sending probe request
  1383. [  878.562980] wlan0: detected beacon loss from AP - sending probe request
  1384. [  879.561518] wlan0: detected beacon loss from AP - sending probe request
  1385. [  880.560034] wlan0: detected beacon loss from AP - sending probe request
  1386. [  881.558545] wlan0: detected beacon loss from AP - sending probe request
  1387. [  882.557031] wlan0: detected beacon loss from AP - sending probe request
  1388. [  883.555572] wlan0: detected beacon loss from AP - sending probe request
  1389. [  884.554054] wlan0: detected beacon loss from AP - sending probe request
  1390. [  885.552573] wlan0: detected beacon loss from AP - sending probe request
  1391. [  886.551112] wlan0: detected beacon loss from AP - sending probe request
  1392. [  887.549688] wlan0: detected beacon loss from AP - sending probe request
  1393. [  888.548127] wlan0: detected beacon loss from AP - sending probe request
  1394. [  889.546621] wlan0: detected beacon loss from AP - sending probe request
  1395. [  890.545225] wlan0: detected beacon loss from AP - sending probe request
  1396. [  891.543640] wlan0: detected beacon loss from AP - sending probe request
  1397. [  892.542236] wlan0: detected beacon loss from AP - sending probe request
  1398. [  893.536720] wlan0: detected beacon loss from AP - sending probe request
  1399. [  894.539196] wlan0: detected beacon loss from AP - sending probe request
  1400. [  895.529713] wlan0: detected beacon loss from AP - sending probe request
  1401. [  896.536208] wlan0: detected beacon loss from AP - sending probe request
  1402. [  897.534724] wlan0: detected beacon loss from AP - sending probe request
  1403. [  898.533323] wlan0: detected beacon loss from AP - sending probe request
  1404. [  899.522760] [Hardware Error]: Machine check events logged
  1405. [  899.531762] wlan0: detected beacon loss from AP - sending probe request
  1406. [  900.530265] wlan0: detected beacon loss from AP - sending probe request
  1407. [  901.520783] wlan0: detected beacon loss from AP - sending probe request
  1408. [  902.527279] wlan0: detected beacon loss from AP - sending probe request
  1409. [  903.517813] wlan0: detected beacon loss from AP - sending probe request
  1410. [  904.524385] wlan0: detected beacon loss from AP - sending probe request
  1411. [  905.522850] wlan0: detected beacon loss from AP - sending probe request
  1412. [  906.521363] wlan0: detected beacon loss from AP - sending probe request
  1413. [  907.519877] wlan0: detected beacon loss from AP - sending probe request
  1414. [  908.518361] wlan0: detected beacon loss from AP - sending probe request
  1415. [  909.518943] wlan0: detected beacon loss from AP - sending probe request
  1416. [  910.515388] wlan0: detected beacon loss from AP - sending probe request
  1417. [  911.513895] wlan0: detected beacon loss from AP - sending probe request
  1418. [  912.512413] wlan0: detected beacon loss from AP - sending probe request
  1419. [  913.510922] wlan0: detected beacon loss from AP - sending probe request
  1420. [  914.505436] wlan0: detected beacon loss from AP - sending probe request
  1421. [  915.507980] wlan0: detected beacon loss from AP - sending probe request
  1422. [  916.508479] wlan0: detected beacon loss from AP - sending probe request
  1423. [  917.504982] wlan0: detected beacon loss from AP - sending probe request
  1424. [  918.503517] wlan0: detected beacon loss from AP - sending probe request
  1425. [  919.501994] wlan0: detected beacon loss from AP - sending probe request
  1426. [  920.500506] wlan0: detected beacon loss from AP - sending probe request
  1427. [  921.499055] wlan0: detected beacon loss from AP - sending probe request
  1428. [  922.497565] wlan0: detected beacon loss from AP - sending probe request
  1429. [  923.498062] wlan0: detected beacon loss from AP - sending probe request
  1430. [  924.496557] wlan0: detected beacon loss from AP - sending probe request
  1431. [  925.495067] wlan0: detected beacon loss from AP - sending probe request
  1432. [  926.493574] wlan0: detected beacon loss from AP - sending probe request
  1433. [  927.492099] wlan0: detected beacon loss from AP - sending probe request
  1434. [  928.490613] wlan0: detected beacon loss from AP - sending probe request
  1435. [  929.483163] wlan0: detected beacon loss from AP - sending probe request
  1436. [  930.485667] wlan0: detected beacon loss from AP - sending probe request
  1437. [  931.484211] wlan0: detected beacon loss from AP - sending probe request
  1438. [  932.482683] wlan0: detected beacon loss from AP - sending probe request
  1439. [  933.481208] wlan0: detected beacon loss from AP - sending probe request
  1440. [  934.479681] wlan0: detected beacon loss from AP - sending probe request
  1441. [  935.478195] wlan0: detected beacon loss from AP - sending probe request
  1442. [  936.476714] wlan0: detected beacon loss from AP - sending probe request
  1443. [  937.475247] wlan0: detected beacon loss from AP - sending probe request
  1444. [  938.473740] wlan0: detected beacon loss from AP - sending probe request
  1445. [  939.472259] wlan0: detected beacon loss from AP - sending probe request
  1446. [  940.470767] wlan0: detected beacon loss from AP - sending probe request
  1447. [  941.469319] wlan0: detected beacon loss from AP - sending probe request
  1448. [  942.467798] wlan0: detected beacon loss from AP - sending probe request
  1449. [  943.466321] wlan0: detected beacon loss from AP - sending probe request
  1450. [  944.464819] wlan0: detected beacon loss from AP - sending probe request
  1451. [  945.463331] wlan0: detected beacon loss from AP - sending probe request
  1452. [  946.461856] wlan0: detected beacon loss from AP - sending probe request
  1453. [  947.460385] wlan0: detected beacon loss from AP - sending probe request
  1454. [  948.458898] wlan0: detected beacon loss from AP - sending probe request
  1455. [  949.457383] wlan0: detected beacon loss from AP - sending probe request
  1456. [  950.457888] wlan0: detected beacon loss from AP - sending probe request
  1457. [  951.454417] wlan0: detected beacon loss from AP - sending probe request
  1458. [  952.452922] wlan0: detected beacon loss from AP - sending probe request
  1459. [  953.451432] wlan0: detected beacon loss from AP - sending probe request
  1460. [  954.449954] wlan0: detected beacon loss from AP - sending probe request
  1461. [  955.448450] wlan0: detected beacon loss from AP - sending probe request
  1462. [  956.449000] wlan0: detected beacon loss from AP - sending probe request
  1463. [  957.445484] wlan0: detected beacon loss from AP - sending probe request
  1464. [  958.443995] wlan0: detected beacon loss from AP - sending probe request
  1465. [  959.442510] wlan0: detected beacon loss from AP - sending probe request
  1466. [  959.941781] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1467. [  961.439529] wlan0: detected beacon loss from AP - sending probe request
  1468. [  962.438073] wlan0: detected beacon loss from AP - sending probe request
  1469. [  963.436561] wlan0: detected beacon loss from AP - sending probe request
  1470. [  964.435104] wlan0: detected beacon loss from AP - sending probe request
  1471. [  965.433614] wlan0: detected beacon loss from AP - sending probe request
  1472. [  966.432103] wlan0: detected beacon loss from AP - sending probe request
  1473. [  967.430639] wlan0: detected beacon loss from AP - sending probe request
  1474. [  968.431126] wlan0: detected beacon loss from AP - sending probe request
  1475. [  969.427647] wlan0: detected beacon loss from AP - sending probe request
  1476. [  970.426152] wlan0: detected beacon loss from AP - sending probe request
  1477. [  971.424666] wlan0: detected beacon loss from AP - sending probe request
  1478. [  972.423183] wlan0: detected beacon loss from AP - sending probe request
  1479. [  973.421694] wlan0: detected beacon loss from AP - sending probe request
  1480. [  974.420202] wlan0: detected beacon loss from AP - sending probe request
  1481. [  975.418733] wlan0: detected beacon loss from AP - sending probe request
  1482. [  976.419251] wlan0: detected beacon loss from AP - sending probe request
  1483. [  977.415742] wlan0: detected beacon loss from AP - sending probe request
  1484. [  978.414252] wlan0: detected beacon loss from AP - sending probe request
  1485. [  979.412787] wlan0: detected beacon loss from AP - sending probe request
  1486. [  980.411297] wlan0: detected beacon loss from AP - sending probe request
  1487. [  981.409793] wlan0: detected beacon loss from AP - sending probe request
  1488. [  982.408329] wlan0: detected beacon loss from AP - sending probe request
  1489. [  983.406843] wlan0: detected beacon loss from AP - sending probe request
  1490. [  984.405358] wlan0: detected beacon loss from AP - sending probe request
  1491. [  985.403841] wlan0: detected beacon loss from AP - sending probe request
  1492. [  987.400864] wlan0: detected beacon loss from AP - sending probe request
  1493. [  988.399380] wlan0: detected beacon loss from AP - sending probe request
  1494. [  989.397923] wlan0: detected beacon loss from AP - sending probe request
  1495. [  990.396413] wlan0: detected beacon loss from AP - sending probe request
  1496. [  991.396925] wlan0: detected beacon loss from AP - sending probe request
  1497. [  992.393457] wlan0: detected beacon loss from AP - sending probe request
  1498. [  993.391945] wlan0: detected beacon loss from AP - sending probe request
  1499. [  994.390481] wlan0: detected beacon loss from AP - sending probe request
  1500. [  996.387476] wlan0: detected beacon loss from AP - sending probe request
  1501. [  997.385995] wlan0: detected beacon loss from AP - sending probe request
  1502. [  998.384532] wlan0: detected beacon loss from AP - sending probe request
  1503. [  998.883775] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1504. [ 1000.381538] wlan0: detected beacon loss from AP - sending probe request
  1505. [ 1001.380068] wlan0: detected beacon loss from AP - sending probe request
  1506. [ 1002.378556] wlan0: detected beacon loss from AP - sending probe request
  1507. [ 1003.379065] wlan0: detected beacon loss from AP - sending probe request
  1508. [ 1004.375612] wlan0: detected beacon loss from AP - sending probe request
  1509. [ 1005.374098] wlan0: detected beacon loss from AP - sending probe request
  1510. [ 1006.372615] wlan0: detected beacon loss from AP - sending probe request
  1511. [ 1007.371124] wlan0: detected beacon loss from AP - sending probe request
  1512. [ 1008.369637] wlan0: detected beacon loss from AP - sending probe request
  1513. [ 1009.360195] wlan0: detected beacon loss from AP - sending probe request
  1514. [ 1010.366658] wlan0: detected beacon loss from AP - sending probe request
  1515. [ 1011.365209] wlan0: detected beacon loss from AP - sending probe request
  1516. [ 1012.365684] wlan0: detected beacon loss from AP - sending probe request
  1517. [ 1013.362206] wlan0: detected beacon loss from AP - sending probe request
  1518. [ 1014.360713] wlan0: detected beacon loss from AP - sending probe request
  1519. [ 1016.357732] wlan0: detected beacon loss from AP - sending probe request
  1520. [ 1017.356250] wlan0: detected beacon loss from AP - sending probe request
  1521. [ 1018.354764] wlan0: detected beacon loss from AP - sending probe request
  1522. [ 1019.355304] wlan0: detected beacon loss from AP - sending probe request
  1523. [ 1020.351791] wlan0: detected beacon loss from AP - sending probe request
  1524. [ 1021.350310] wlan0: detected beacon loss from AP - sending probe request
  1525. [ 1022.350817] wlan0: detected beacon loss from AP - sending probe request
  1526. [ 1023.347327] wlan0: detected beacon loss from AP - sending probe request
  1527. [ 1024.345851] wlan0: detected beacon loss from AP - sending probe request
  1528. [ 1025.344353] wlan0: detected beacon loss from AP - sending probe request
  1529. [ 1027.345362] wlan0: detected beacon loss from AP - sending probe request
  1530. [ 1028.339909] wlan0: detected beacon loss from AP - sending probe request
  1531. [ 1029.338403] wlan0: detected beacon loss from AP - sending probe request
  1532. [ 1030.336917] wlan0: detected beacon loss from AP - sending probe request
  1533. [ 1031.335428] wlan0: detected beacon loss from AP - sending probe request
  1534. [ 1032.333965] wlan0: detected beacon loss from AP - sending probe request
  1535. [ 1033.332466] wlan0: detected beacon loss from AP - sending probe request
  1536. [ 1034.327007] wlan0: detected beacon loss from AP - sending probe request
  1537. [ 1035.329499] wlan0: detected beacon loss from AP - sending probe request
  1538. [ 1036.328010] wlan0: detected beacon loss from AP - sending probe request
  1539. [ 1037.326538] wlan0: detected beacon loss from AP - sending probe request
  1540. [ 1038.325021] wlan0: detected beacon loss from AP - sending probe request
  1541. [ 1039.323552] wlan0: detected beacon loss from AP - sending probe request
  1542. [ 1040.322048] wlan0: detected beacon loss from AP - sending probe request
  1543. [ 1041.320560] wlan0: detected beacon loss from AP - sending probe request
  1544. [ 1042.319103] wlan0: detected beacon loss from AP - sending probe request
  1545. [ 1043.313623] wlan0: detected beacon loss from AP - sending probe request
  1546. [ 1044.316093] wlan0: detected beacon loss from AP - sending probe request
  1547. [ 1045.314609] wlan0: detected beacon loss from AP - sending probe request
  1548. [ 1046.313178] wlan0: detected beacon loss from AP - sending probe request
  1549. [ 1047.311637] wlan0: detected beacon loss from AP - sending probe request
  1550. [ 1048.310155] wlan0: detected beacon loss from AP - sending probe request
  1551. [ 1049.308668] wlan0: detected beacon loss from AP - sending probe request
  1552. [ 1050.307186] wlan0: detected beacon loss from AP - sending probe request
  1553. [ 1051.305704] wlan0: detected beacon loss from AP - sending probe request
  1554. [ 1052.304198] wlan0: detected beacon loss from AP - sending probe request
  1555. [ 1053.302713] wlan0: detected beacon loss from AP - sending probe request
  1556. [ 1054.301247] wlan0: detected beacon loss from AP - sending probe request
  1557. [ 1055.299752] wlan0: detected beacon loss from AP - sending probe request
  1558. [ 1056.300236] wlan0: detected beacon loss from AP - sending probe request
  1559. [ 1057.296764] wlan0: detected beacon loss from AP - sending probe request
  1560. [ 1058.295275] wlan0: detected beacon loss from AP - sending probe request
  1561. [ 1059.293787] wlan0: detected beacon loss from AP - sending probe request
  1562. [ 1060.292300] wlan0: detected beacon loss from AP - sending probe request
  1563. [ 1061.290811] wlan0: detected beacon loss from AP - sending probe request
  1564. [ 1062.289330] wlan0: detected beacon loss from AP - sending probe request
  1565. [ 1063.287841] wlan0: detected beacon loss from AP - sending probe request
  1566. [ 1064.286362] wlan0: detected beacon loss from AP - sending probe request
  1567. [ 1065.284866] wlan0: detected beacon loss from AP - sending probe request
  1568. [ 1066.283394] wlan0: detected beacon loss from AP - sending probe request
  1569. [ 1067.281893] wlan0: detected beacon loss from AP - sending probe request
  1570. [ 1068.280421] wlan0: detected beacon loss from AP - sending probe request
  1571. [ 1069.278931] wlan0: detected beacon loss from AP - sending probe request
  1572. [ 1070.277430] wlan0: detected beacon loss from AP - sending probe request
  1573. [ 1071.276010] wlan0: detected beacon loss from AP - sending probe request
  1574. [ 1072.274456] wlan0: detected beacon loss from AP - sending probe request
  1575. [ 1073.274963] wlan0: detected beacon loss from AP - sending probe request
  1576. [ 1074.271488] wlan0: detected beacon loss from AP - sending probe request
  1577. [ 1075.270019] wlan0: detected beacon loss from AP - sending probe request
  1578. [ 1076.268532] wlan0: detected beacon loss from AP - sending probe request
  1579. [ 1076.768796] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1580. [ 1077.269015] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 2/5
  1581. [ 1078.265532] wlan0: detected beacon loss from AP - sending probe request
  1582. [ 1079.264073] wlan0: detected beacon loss from AP - sending probe request
  1583. [ 1080.262561] wlan0: detected beacon loss from AP - sending probe request
  1584. [ 1081.261085] wlan0: detected beacon loss from AP - sending probe request
  1585. [ 1082.259581] wlan0: detected beacon loss from AP - sending probe request
  1586. [ 1083.258111] wlan0: detected beacon loss from AP - sending probe request
  1587. [ 1084.256627] wlan0: detected beacon loss from AP - sending probe request
  1588. [ 1085.247144] wlan0: detected beacon loss from AP - sending probe request
  1589. [ 1086.253632] wlan0: detected beacon loss from AP - sending probe request
  1590. [ 1087.252146] wlan0: detected beacon loss from AP - sending probe request
  1591. [ 1088.250659] wlan0: detected beacon loss from AP - sending probe request
  1592. [ 1089.249172] wlan0: detected beacon loss from AP - sending probe request
  1593. [ 1090.247693] wlan0: detected beacon loss from AP - sending probe request
  1594. [ 1091.246202] wlan0: detected beacon loss from AP - sending probe request
  1595. [ 1092.246707] wlan0: detected beacon loss from AP - sending probe request
  1596. [ 1092.745999] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1597. [ 1094.241729] wlan0: detected beacon loss from AP - sending probe request
  1598. [ 1094.741026] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1599. [ 1096.238761] wlan0: detected beacon loss from AP - sending probe request
  1600. [ 1097.237285] wlan0: detected beacon loss from AP - sending probe request
  1601. [ 1098.235817] wlan0: detected beacon loss from AP - sending probe request
  1602. [ 1099.234326] wlan0: detected beacon loss from AP - sending probe request
  1603. [ 1100.232842] wlan0: detected beacon loss from AP - sending probe request
  1604. [ 1101.231326] wlan0: detected beacon loss from AP - sending probe request
  1605. [ 1102.229837] wlan0: detected beacon loss from AP - sending probe request
  1606. [ 1103.228354] wlan0: detected beacon loss from AP - sending probe request
  1607. [ 1104.226863] wlan0: detected beacon loss from AP - sending probe request
  1608. [ 1105.225382] wlan0: detected beacon loss from AP - sending probe request
  1609. [ 1106.223888] wlan0: detected beacon loss from AP - sending probe request
  1610. [ 1107.222430] wlan0: detected beacon loss from AP - sending probe request
  1611. [ 1108.220915] wlan0: detected beacon loss from AP - sending probe request
  1612. [ 1109.211451] wlan0: detected beacon loss from AP - sending probe request
  1613. [ 1110.217936] wlan0: detected beacon loss from AP - sending probe request
  1614. [ 1111.216454] wlan0: detected beacon loss from AP - sending probe request
  1615. [ 1112.215000] wlan0: detected beacon loss from AP - sending probe request
  1616. [ 1113.213480] wlan0: detected beacon loss from AP - sending probe request
  1617. [ 1114.211998] wlan0: detected beacon loss from AP - sending probe request
  1618. [ 1115.212524] wlan0: detected beacon loss from AP - sending probe request
  1619. [ 1116.211016] wlan0: detected beacon loss from AP - sending probe request
  1620. [ 1117.207530] wlan0: detected beacon loss from AP - sending probe request
  1621. [ 1118.206036] wlan0: detected beacon loss from AP - sending probe request
  1622. [ 1119.206603] wlan0: detected beacon loss from AP - sending probe request
  1623. [ 1120.203083] wlan0: detected beacon loss from AP - sending probe request
  1624. [ 1120.379090] CPU0: Package power limit notification (total events = 5)
  1625. [ 1120.379095] CPU2: Package power limit notification (total events = 5)
  1626. [ 1120.379099] CPU3: Package power limit notification (total events = 5)
  1627. [ 1120.379103] CPU1: Package power limit notification (total events = 5)
  1628. [ 1120.389998] CPU0: Package power limit normal
  1629. [ 1120.390002] CPU2: Package power limit normal
  1630. [ 1120.390005] CPU3: Package power limit normal
  1631. [ 1120.390008] CPU1: Package power limit normal
  1632. [ 1121.197625] wlan0: detected beacon loss from AP - sending probe request
  1633. [ 1122.200092] wlan0: detected beacon loss from AP - sending probe request
  1634. [ 1123.198752] wlan0: detected beacon loss from AP - sending probe request
  1635. [ 1124.199115] wlan0: detected beacon loss from AP - sending probe request
  1636. [ 1125.195632] wlan0: detected beacon loss from AP - sending probe request
  1637. [ 1126.194145] wlan0: detected beacon loss from AP - sending probe request
  1638. [ 1127.192686] wlan0: detected beacon loss from AP - sending probe request
  1639. [ 1128.191183] wlan0: detected beacon loss from AP - sending probe request
  1640. [ 1129.189681] wlan0: detected beacon loss from AP - sending probe request
  1641. [ 1130.190182] wlan0: detected beacon loss from AP - sending probe request
  1642. [ 1131.186709] wlan0: detected beacon loss from AP - sending probe request
  1643. [ 1132.185222] wlan0: detected beacon loss from AP - sending probe request
  1644. [ 1133.185729] wlan0: detected beacon loss from AP - sending probe request
  1645. [ 1134.182245] wlan0: detected beacon loss from AP - sending probe request
  1646. [ 1135.180759] wlan0: detected beacon loss from AP - sending probe request
  1647. [ 1136.179280] wlan0: detected beacon loss from AP - sending probe request
  1648. [ 1137.177788] wlan0: detected beacon loss from AP - sending probe request
  1649. [ 1138.176299] wlan0: detected beacon loss from AP - sending probe request
  1650. [ 1139.174818] wlan0: detected beacon loss from AP - sending probe request
  1651. [ 1140.173323] wlan0: detected beacon loss from AP - sending probe request
  1652. [ 1141.171836] wlan0: detected beacon loss from AP - sending probe request
  1653. [ 1141.671120] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1654. [ 1143.168894] wlan0: detected beacon loss from AP - sending probe request
  1655. [ 1144.167386] wlan0: detected beacon loss from AP - sending probe request
  1656. [ 1145.161926] wlan0: detected beacon loss from AP - sending probe request
  1657. [ 1146.164398] wlan0: detected beacon loss from AP - sending probe request
  1658. [ 1147.162922] wlan0: detected beacon loss from AP - sending probe request
  1659. [ 1148.161425] wlan0: detected beacon loss from AP - sending probe request
  1660. [ 1149.159965] wlan0: detected beacon loss from AP - sending probe request
  1661. [ 1150.158464] wlan0: detected beacon loss from AP - sending probe request
  1662. [ 1151.156992] wlan0: detected beacon loss from AP - sending probe request
  1663. [ 1152.155493] wlan0: detected beacon loss from AP - sending probe request
  1664. [ 1153.154031] wlan0: detected beacon loss from AP - sending probe request
  1665. [ 1154.152506] wlan0: detected beacon loss from AP - sending probe request
  1666. [ 1155.151015] wlan0: detected beacon loss from AP - sending probe request
  1667. [ 1156.149529] wlan0: detected beacon loss from AP - sending probe request
  1668. [ 1157.148041] wlan0: detected beacon loss from AP - sending probe request
  1669. [ 1158.146552] wlan0: detected beacon loss from AP - sending probe request
  1670. [ 1159.145087] wlan0: detected beacon loss from AP - sending probe request
  1671. [ 1160.143580] wlan0: detected beacon loss from AP - sending probe request
  1672. [ 1161.142098] wlan0: detected beacon loss from AP - sending probe request
  1673. [ 1162.140625] wlan0: detected beacon loss from AP - sending probe request
  1674. [ 1163.139148] wlan0: detected beacon loss from AP - sending probe request
  1675. [ 1164.137653] wlan0: detected beacon loss from AP - sending probe request
  1676. [ 1165.138140] wlan0: detected beacon loss from AP - sending probe request
  1677. [ 1166.134683] wlan0: detected beacon loss from AP - sending probe request
  1678. [ 1167.133183] wlan0: detected beacon loss from AP - sending probe request
  1679. [ 1168.131682] wlan0: detected beacon loss from AP - sending probe request
  1680. [ 1169.130206] wlan0: detected beacon loss from AP - sending probe request
  1681. [ 1170.128715] wlan0: detected beacon loss from AP - sending probe request
  1682. [ 1172.125741] wlan0: detected beacon loss from AP - sending probe request
  1683. [ 1173.124256] wlan0: detected beacon loss from AP - sending probe request
  1684. [ 1174.122770] wlan0: detected beacon loss from AP - sending probe request
  1685. [ 1175.121272] wlan0: detected beacon loss from AP - sending probe request
  1686. [ 1176.121770] wlan0: detected beacon loss from AP - sending probe request
  1687. [ 1177.118296] wlan0: detected beacon loss from AP - sending probe request
  1688. [ 1178.116844] wlan0: detected beacon loss from AP - sending probe request
  1689. [ 1179.115337] wlan0: detected beacon loss from AP - sending probe request
  1690. [ 1180.113834] wlan0: detected beacon loss from AP - sending probe request
  1691. [ 1181.114383] wlan0: detected beacon loss from AP - sending probe request
  1692. [ 1182.110864] wlan0: detected beacon loss from AP - sending probe request
  1693. [ 1183.109386] wlan0: detected beacon loss from AP - sending probe request
  1694. [ 1184.099902] wlan0: detected beacon loss from AP - sending probe request
  1695. [ 1185.106399] wlan0: detected beacon loss from AP - sending probe request
  1696. [ 1186.104920] wlan0: detected beacon loss from AP - sending probe request
  1697. [ 1187.103454] wlan0: detected beacon loss from AP - sending probe request
  1698. [ 1188.101951] wlan0: detected beacon loss from AP - sending probe request
  1699. [ 1189.100468] wlan0: detected beacon loss from AP - sending probe request
  1700. [ 1190.100956] wlan0: detected beacon loss from AP - sending probe request
  1701. [ 1191.097472] wlan0: detected beacon loss from AP - sending probe request
  1702. [ 1192.095990] wlan0: detected beacon loss from AP - sending probe request
  1703. [ 1193.096507] wlan0: detected beacon loss from AP - sending probe request
  1704. [ 1194.093013] wlan0: detected beacon loss from AP - sending probe request
  1705. [ 1195.091528] wlan0: detected beacon loss from AP - sending probe request
  1706. [ 1196.090089] wlan0: detected beacon loss from AP - sending probe request
  1707. [ 1197.088562] wlan0: detected beacon loss from AP - sending probe request
  1708. [ 1198.087083] wlan0: detected beacon loss from AP - sending probe request
  1709. [ 1199.079588] [Hardware Error]: Machine check events logged
  1710. [ 1199.087578] wlan0: detected beacon loss from AP - sending probe request
  1711. [ 1200.084095] wlan0: detected beacon loss from AP - sending probe request
  1712. [ 1201.082605] wlan0: detected beacon loss from AP - sending probe request
  1713. [ 1202.083144] wlan0: detected beacon loss from AP - sending probe request
  1714. [ 1203.079632] wlan0: detected beacon loss from AP - sending probe request
  1715. [ 1204.078144] wlan0: detected beacon loss from AP - sending probe request
  1716. [ 1205.072656] wlan0: detected beacon loss from AP - sending probe request
  1717. [ 1206.071178] wlan0: detected beacon loss from AP - sending probe request
  1718. [ 1207.073698] wlan0: detected beacon loss from AP - sending probe request
  1719. [ 1208.072196] wlan0: detected beacon loss from AP - sending probe request
  1720. [ 1209.070713] wlan0: detected beacon loss from AP - sending probe request
  1721. [ 1210.069223] wlan0: detected beacon loss from AP - sending probe request
  1722. [ 1211.067737] wlan0: detected beacon loss from AP - sending probe request
  1723. [ 1212.066251] wlan0: detected beacon loss from AP - sending probe request
  1724. [ 1213.064757] wlan0: detected beacon loss from AP - sending probe request
  1725. [ 1214.063268] wlan0: detected beacon loss from AP - sending probe request
  1726. [ 1215.057863] wlan0: detected beacon loss from AP - sending probe request
  1727. [ 1216.060285] wlan0: detected beacon loss from AP - sending probe request
  1728. [ 1217.058821] wlan0: detected beacon loss from AP - sending probe request
  1729. [ 1218.057319] wlan0: detected beacon loss from AP - sending probe request
  1730. [ 1219.055840] wlan0: detected beacon loss from AP - sending probe request
  1731. [ 1220.056372] wlan0: detected beacon loss from AP - sending probe request
  1732. [ 1221.052872] wlan0: detected beacon loss from AP - sending probe request
  1733. [ 1222.051403] wlan0: detected beacon loss from AP - sending probe request
  1734. [ 1223.045965] wlan0: detected beacon loss from AP - sending probe request
  1735. [ 1224.048407] wlan0: detected beacon loss from AP - sending probe request
  1736. [ 1225.046913] wlan0: detected beacon loss from AP - sending probe request
  1737. [ 1226.047419] wlan0: detected beacon loss from AP - sending probe request
  1738. [ 1227.043951] wlan0: detected beacon loss from AP - sending probe request
  1739. [ 1228.042452] wlan0: detected beacon loss from AP - sending probe request
  1740. [ 1229.041036] wlan0: detected beacon loss from AP - sending probe request
  1741. [ 1230.039475] wlan0: detected beacon loss from AP - sending probe request
  1742. [ 1231.037998] wlan0: detected beacon loss from AP - sending probe request
  1743. [ 1232.038500] wlan0: detected beacon loss from AP - sending probe request
  1744. [ 1233.035019] wlan0: detected beacon loss from AP - sending probe request
  1745. [ 1234.033532] wlan0: detected beacon loss from AP - sending probe request
  1746. [ 1235.034035] wlan0: detected beacon loss from AP - sending probe request
  1747. [ 1236.030552] wlan0: detected beacon loss from AP - sending probe request
  1748. [ 1237.029064] wlan0: detected beacon loss from AP - sending probe request
  1749. [ 1238.027577] wlan0: detected beacon loss from AP - sending probe request
  1750. [ 1239.026096] wlan0: detected beacon loss from AP - sending probe request
  1751. [ 1240.024612] wlan0: detected beacon loss from AP - sending probe request
  1752. [ 1241.023147] wlan0: detected beacon loss from AP - sending probe request
  1753. [ 1242.021630] wlan0: detected beacon loss from AP - sending probe request
  1754. [ 1243.020151] wlan0: detected beacon loss from AP - sending probe request
  1755. [ 1244.018678] wlan0: detected beacon loss from AP - sending probe request
  1756. [ 1245.017167] wlan0: detected beacon loss from AP - sending probe request
  1757. [ 1246.015711] wlan0: detected beacon loss from AP - sending probe request
  1758. [ 1247.016189] wlan0: detected beacon loss from AP - sending probe request
  1759. [ 1248.012717] wlan0: detected beacon loss from AP - sending probe request
  1760. [ 1249.011228] wlan0: detected beacon loss from AP - sending probe request
  1761. [ 1250.011759] wlan0: detected beacon loss from AP - sending probe request
  1762. [ 1251.008261] wlan0: detected beacon loss from AP - sending probe request
  1763. [ 1252.006749] wlan0: detected beacon loss from AP - sending probe request
  1764. [ 1253.007261] wlan0: detected beacon loss from AP - sending probe request
  1765. [ 1254.003785] wlan0: detected beacon loss from AP - sending probe request
  1766. [ 1255.002313] wlan0: detected beacon loss from AP - sending probe request
  1767. [ 1256.002806] wlan0: detected beacon loss from AP - sending probe request
  1768. [ 1256.999318] wlan0: detected beacon loss from AP - sending probe request
  1769. [ 1257.999824] wlan0: detected beacon loss from AP - sending probe request
  1770. [ 1258.996346] wlan0: detected beacon loss from AP - sending probe request
  1771. [ 1259.990944] wlan0: detected beacon loss from AP - sending probe request
  1772. [ 1260.993407] wlan0: detected beacon loss from AP - sending probe request
  1773. [ 1261.987895] wlan0: detected beacon loss from AP - sending probe request
  1774. [ 1262.990396] wlan0: detected beacon loss from AP - sending probe request
  1775. [ 1263.988910] wlan0: detected beacon loss from AP - sending probe request
  1776. [ 1264.987423] wlan0: detected beacon loss from AP - sending probe request
  1777. [ 1265.985940] wlan0: detected beacon loss from AP - sending probe request
  1778. [ 1266.984458] wlan0: detected beacon loss from AP - sending probe request
  1779. [ 1267.978998] wlan0: detected beacon loss from AP - sending probe request
  1780. [ 1268.983464] wlan0: detected beacon loss from AP - sending probe request
  1781. [ 1269.979998] wlan0: detected beacon loss from AP - sending probe request
  1782. [ 1270.974537] wlan0: detected beacon loss from AP - sending probe request
  1783. [ 1271.977009] wlan0: detected beacon loss from AP - sending probe request
  1784. [ 1272.975521] wlan0: detected beacon loss from AP - sending probe request
  1785. [ 1273.974053] wlan0: detected beacon loss from AP - sending probe request
  1786. [ 1274.972575] wlan0: detected beacon loss from AP - sending probe request
  1787. [ 1275.973059] wlan0: detected beacon loss from AP - sending probe request
  1788. [ 1276.971578] wlan0: detected beacon loss from AP - sending probe request
  1789. [ 1277.968122] wlan0: detected beacon loss from AP - sending probe request
  1790. [ 1278.966602] wlan0: detected beacon loss from AP - sending probe request
  1791. [ 1279.957147] wlan0: detected beacon loss from AP - sending probe request
  1792. [ 1280.963626] wlan0: detected beacon loss from AP - sending probe request
  1793. [ 1281.962141] wlan0: detected beacon loss from AP - sending probe request
  1794. [ 1282.960683] wlan0: detected beacon loss from AP - sending probe request
  1795. [ 1283.460917] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1796. [ 1284.957675] wlan0: detected beacon loss from AP - sending probe request
  1797. [ 1285.456965] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
  1798. [ 1286.954701] wlan0: detected beacon loss from AP - sending probe request
  1799. [ 1287.953235] wlan0: detected beacon loss from AP - sending probe request
  1800. [ 1288.452511] ieee80211 phy0: wlan0: No probe response from AP 00:1a:dd:b8:40:21 after 500ms, try 1/5
create a new version of this paste RAW Paste Data