Orange Pi PC booting 4.6.0-rc1

U-Boot SPL 2016.03-armbian (Apr 08 2016 - 08:37:32)
DRAM: 1024 MiB
Trying to boot from


U-Boot 2016.03-armbian (Apr 08 2016 - 08:37:32 +0200) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
USB4:   USB EHCI 1.00
USB5:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
Hit any key to stop autoboot:  0
(FEL boot)
## Executing script at 43100000
gpio: pin PL10 (gpio 298) value is 1
gpio: pin PG11 (gpio 203) value is 1
Kernel image @ 0x42000000 [ 0x000000 - 0x574590 ]
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Using Device Tree in place at 43000000, end 43006d81
Using machid 0x1029 from environment

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 4.6.0-rc1-sunxi (root@armbian) (gcc version 5.3.1 20160205 (Ubuntu/Linaro 5.3.1-8ubuntu2) ) #5 SMP Fri Apr 8 08:37:49 CEST 2016
[    0.000000] Kernel command line: console=tty1 console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.83.120:/raid-0/Armbian_Cache/sdcard/ ip=dhcp rw panic=10 consoleblank=0 enforcing=0 loglevel=6 rootflags=noatime,nodiratime
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0b9fc4c   (11872 kB)
[    0.000000]       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
[    0.000000]       .data : 0xc0d00000 - 0xc0d49f00   ( 296 kB)
[    0.000000]        .bss : 0xc0d4b000 - 0xc0d96690   ( 302 kB)
[    0.001816] /cpus/cpu@0 missing clock-frequency property
[    0.001839] /cpus/cpu@1 missing clock-frequency property
[    0.001854] /cpus/cpu@2 missing clock-frequency property
[    0.001869] /cpus/cpu@3 missing clock-frequency property
[    3.133879] SCSI subsystem initialized
[    3.149104] Initialise system trusted keyring
[    3.149569] workingset: timestamp_bits=12 max_order=18 bucket_order=6
[    3.161000] NFS: Registering the id_resolver key type
[    3.161054] Key type id_resolver registered
[    3.161064] Key type id_legacy registered
[    3.179442] gpiod_to_irq: invalid GPIO
[    3.179460] gpiod_to_irq: invalid GPIO
[    3.711640] Key type dns_resolver registered
[    3.716302] Registering SWP/SWPB emulation handler
[    3.721905] Loading compiled-in X.509 certificates
[    3.730201] Key type encrypted registered
[    7.856691] Sending DHCP requests ., OK
[    9.375419] random: systemd urandom read with 40 bits of entropy available

Welcome to Debian GNU/Linux 8 (jessie)!

[    9.950000] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
         Expecting device dev-ttyS0.device...
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Paths.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[  OK  ] Reached target Swap.
[  OK  ] Created slice Root Slice.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Journal Socket.
[  OK  ] Created slice System Slice.
         Starting Increase datagram queue length...
         Starting Restore / save the current clock...
         Starting udev Coldplug all Devices...
         Starting Create list of required static device nodes...rrent kernel...
         Mounting Debug File System...
         Mounting POSIX Message Queue File System...
         Starting LSB: Set keymap...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-getty.slice.
         Starting Load Kernel Modules...
[  OK  ] Reached target Slices.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Increase datagram queue length.
[  OK  ] Started Restore / save the current clock.
[  OK  ] Started Create list of required static device nodes ...current kernel.
[  OK  ] Started LSB: Set keymap.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started udev Coldplug all Devices.
         Mounting FUSE Control File System...
         Starting Apply Kernel Variables...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
[  OK  ] Started Journal Service.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  [   11.159226] random: nonblocking pool is initialized
] Started udev Kernel Device Manager.
         Starting Copy rules generated while the root was ro...
         Starting LSB: Tune IDE hard disks...
         Starting LSB: Set preliminary keymap...
[  OK  ] Started Copy rules generated while the root was ro.
[  OK  ] Started LSB: Tune IDE hard disks.
[   11.671342] cpu cpu0: failed to get clock: -2
[   11.675744] cpufreq-dt: probe of cpufreq-dt failed with error -2
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Created slice system-ifup.slice.
[  OK  ] Started LSB: Set preliminary keymap.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Various fixups to make systemd work better on Debian...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting Load/Save Random Seed...
[  OK  ] Started Various fixups to make systemd work better on Debian.
[  OK  ] Mounted /tmp.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting LSB: Raise network interfaces....
[  OK  ] Reached target Remote File Systems.
         Starting Trigger Flushing of Journal to Persistent Storage...
         Starting LSB: Prepare console...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started LSB: Prepare console.
         Starting LSB: Set console font and keymap...
[  OK  ] Started LSB: Raise network interfaces..
         Starting ifup for eth0...
[  OK  ] Started ifup for eth0.
[  OK  ] Reached target Network.
[  OK  ] Reached target Network is Online.
[  OK  ] Started LSB: Set console font and keymap.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Basic System.
         Starting Entropy daemon using the HAVEGE algorithm...
[  OK  ] Started Entropy daemon using the HAVEGE algorithm.
         Starting OpenBSD Secure Shell server...
[  OK  ] Started OpenBSD Secure Shell server.
         Starting System Logging Service...
         Starting Regular background program processing daemon...
[  OK  ] Started Regular background program processing daemon.
         Starting /etc/rc.local Compatibility...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
         Starting Login Service...
         Starting Permit User Sessions...
         Starting LSB: Starts LIRC daemon....
         Starting LSB: disk temperature monitoring daemon...
         Starting LSB: Advanced IEEE 802.11 management daemon...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting LSB: Start NTP daemon...
         Starting LSB: Armbian gathering informations about hardware...
[  OK  ] Started System Logging Service.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Started LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Started LSB: Starts LIRC daemon..
[  OK  ] Started Login Service.
         Starting Serial Getty on ttyS0...
[  OK  ] Started Serial Getty on ttyS0.
         Starting Getty on tty1...
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
         Starting LSB: set CPUFreq kernel parameters...
[  OK  ] Started LSB: set CPUFreq kernel parameters.
         Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[  OK  ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[  OK  ] Started LSB: Armbian gathering informations about hardware.
         Starting LSB: PLEASE BE PATIENT AND DO NOT INTERRUPT...FIRST REBOOT...

Debian GNU/Linux 8 orangepih3 ttyS0

orangepih3 login: [  OK  ] Removed slice system-ifup.slice.
         Stopping LSB: PLEASE BE PATIENT AND DO NOT INTERRUPT...FIRST REBOOT...
[  OK  ] Stopped target Graphical Interface.
         Stopping Entropy daemon using the HAVEGE algorithm...
[  OK  ] Stopped target Multi-User System.
         Stopping LSB: Set sysfs variables from /etc/sysfs.conf...
         Stopping LSB: Starts LIRC daemon....
         Stopping LSB: disk temperature monitoring daemon...
         Stopping LSB: Advanced IEEE 802.11 management daemon...
         Stopping LSB: Start NTP daemon...
         Stopping OpenBSD Secure Shell server...
         Stopping Regular background program processing daemon...
         Stopping Login Service...
[  OK  ] Sto         Stopping Getty on tty1...
         Stopping D-Bus System Message Bus...
         Stopping System Logging Service...
         Starting Store Sound Card State...
         Starting Unattended Upgrades...
[  OK  ] Stopped Entropy daemon using the HAVEGE algorithm.
[  OK  ] Stopped System Logging Service.
[  OK  ] Stopped Regular background program processing daemon.
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped Login Service.
[  OK  ] Stopped Serial Getty on ttyS0.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped OpenBSD Secure Shell server.
[  OK  ] Stopped LSB: PLEASE BE PATIENT AND DO NOT INTERRUPT THE FIRST REBOOT.
[  OK  ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf.
[  OK  ] Stopped LSB: Starts LIRC daemon..
[  OK  ] Stopped LSB: disk temperature monitoring daemon.
[  OK  ] Stopped LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Stopped LSB: Start NTP daemon.
[FAILED] Failed to start Store Sound Card State.
See 'systemctl status alsa-store.service' for details.
[  OK  ] Stopped target Network is Online.
         Stopping LSB: set CPUFreq kernel parameters...
         Stopping LSB: Armbian gathering informations about hardware...
[  OK  ] Removed slice system-getty.slice.
[  OK  ] Removed slice system-serial\x2dgetty.slice.
         Stopping /etc/rc.local Compatibility...
[  OK  ] Stopped /etc/rc.local Compatibility.
[  OK  ] Stopped target Network.
         Stopping Permit User Sessions...
[  OK  ] Stopped LSB: set CPUFreq kernel parameters.
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Started Unattended Upgrades.
         Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
[  OK  ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped target Remote File Systems (Pre).
[  OK  ] Stopped LSB: Armbian gathering informations about hardware.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Timers.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Closed Syslog Socket.
[  OK  ] Stopped target System Initialization.
         Stopping Restore / save the current clock...
         Stopping Apply Kernel Variables...
[  OK  ] Stopped Apply Kernel Variables.
[  OK  ] Stopped target Encrypted Volumes.
         Stopping LSB: Raise network interfaces....
[  OK  ] Stopped target Swap.
         Stopping Update UTMP about System Boot/Shutdown...
         Stopping Load Kernel Modules...
[  OK  ] Stopped Load Kernel Modules.
[  OK  ] Stopped Restore / save the current clock.
[  OK  ] Stopped LSB: Raise network interfaces..
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
         Stopping Create Volatile Files and Directories...
[  OK  ] Stopped Create Volatile Files and Directories.
         Stopping Load/Save Random Seed...
[  OK  ] Stopped target Local File Systems.
         Unmounting /tmp...
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Failed unmounting /tmp.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Local File Systems (Pre).
         Stopping Create Static Device Nodes in /dev...
[  OK  ] Stopped Create Static Device Nodes in /dev.
         Stopping Remount Root and Kernel File Systems...
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Reached target Shutdown.
[   54.293035] watchdog: watchdog0: watchdog did not stop!
[   54.396848] reboot: Restarting system