Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 37.920] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
- [ 37.921] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
- [ 37.965] (II) intel(0): EDID for output VGA1
- [ 37.965] (II) intel(0): Manufacturer: PHL Model: c00b Serial#: 931077
- [ 37.965] (II) intel(0): Year: 2004 Week: 42
- [ 37.965] (II) intel(0): EDID Version: 1.3
- [ 37.965] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
- [ 37.965] (II) intel(0): Signal levels configurable
- [ 37.965] (II) intel(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
- [ 37.965] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
- [ 37.965] (II) intel(0): Gamma: 2.20
- [ 37.965] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
- [ 37.965] (II) intel(0): Default color space is primary color space
- [ 37.965] (II) intel(0): First detailed timing is preferred mode
- [ 37.965] (II) intel(0): redX: 0.637 redY: 0.340 greenX: 0.300 greenY: 0.598
- [ 37.965] (II) intel(0): blueX: 0.143 blueY: 0.086 whiteX: 0.313 whiteY: 0.329
- [ 37.965] (II) intel(0): Supported established timings:
- [ 37.966] (II) intel(0): 720x400@70Hz
- [ 37.966] (II) intel(0): 640x480@60Hz
- [ 37.966] (II) intel(0): 640x480@67Hz
- [ 37.966] (II) intel(0): 640x480@72Hz
- [ 37.966] (II) intel(0): 640x480@75Hz
- [ 37.966] (II) intel(0): 800x600@56Hz
- [ 37.966] (II) intel(0): 800x600@60Hz
- [ 37.966] (II) intel(0): 800x600@72Hz
- [ 37.966] (II) intel(0): 800x600@75Hz
- [ 37.966] (II) intel(0): 832x624@75Hz
- [ 37.966] (II) intel(0): 1024x768@60Hz
- [ 37.966] (II) intel(0): 1024x768@70Hz
- [ 37.966] (II) intel(0): 1024x768@75Hz
- [ 37.966] (II) intel(0): 1280x1024@75Hz
- [ 37.966] (II) intel(0): 1152x864@75Hz
- [ 37.966] (II) intel(0): Manufacturer's mask: 0
- [ 37.966] (II) intel(0): Supported standard timings:
- [ 37.966] (II) intel(0): #0: hsize: 1152 vsize 864 refresh: 70 vid: 19057
- [ 37.966] (II) intel(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
- [ 37.966] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
- [ 37.966] (II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
- [ 37.966] (II) intel(0): Supported detailed timing:
- [ 37.966] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
- [ 37.966] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
- [ 37.966] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
- [ 37.967] (II) intel(0): Serial No: CX 931077
- [ 37.967] (II) intel(0): Monitor name: Philips 170C5
- [ 37.967] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
- [ 37.967] (II) intel(0): EDID (in hex):
- [ 37.967] (II) intel(0): 00ffffffffffff00410c0bc005350e00
- [ 37.967] (II) intel(0): 2a0e01031f221b78ee0c85a3574c9924
- [ 37.967] (II) intel(0): 165054bfef80714a714f814081800101
- [ 37.967] (II) intel(0): 010101010101302a009851002a403070
- [ 37.967] (II) intel(0): 1300520e1100001e000000ff00204358
- [ 37.967] (II) intel(0): 20203933313037370a20000000fc0050
- [ 37.967] (II) intel(0): 68696c697073203137304335000000fd
- [ 37.967] (II) intel(0): 00384c1e520e000a20202020202000cb
- [ 37.967] (II) intel(0): Printing probed modes for output VGA1
- [ 37.967] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
- [ 37.967] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
- [ 37.967] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
- [ 37.967] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
- [ 37.967] (II) intel(0): Modeline "1152x864"x70.0 96.73 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
- [ 37.967] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
- [ 37.967] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
- [ 37.968] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
- [ 37.968] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
- [ 37.968] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
- [ 37.968] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
- [ 37.968] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
- [ 37.968] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
- [ 37.968] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
- [ 37.968] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
- [ 37.968] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
- [ 37.968] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
- [ 37.968] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
- [ 37.968] (II) intel(0): Output LVDS1 connected
- [ 37.968] (II) intel(0): Output VGA1 connected
- [ 37.968] (II) intel(0): Using spanning desktop for initial modes
- [ 37.968] (II) intel(0): Output LVDS1 using initial mode 1366x768 +0+0
- [ 37.968] (II) intel(0): Output VGA1 using initial mode 1280x1024 +1366+0
- [ 37.968] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
- [ 37.968] (II) intel(0): Kernel page flipping support detected, enabling
- [ 37.968] (==) intel(0): DPI set to (96, 96)
- [ 37.968] (II) Loading sub module "fb"
- [ 37.968] (II) LoadModule: "fb"
- [ 37.969] (II) Loading /usr/lib64/xorg/modules/libfb.so
- [ 37.974] (II) Module fb: vendor="X.Org Foundation"
- [ 37.974] compiled for 1.13.2.902, module version = 1.0.0
- [ 37.974] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 37.974] (II) Loading sub module "dri2"
- [ 37.974] (II) LoadModule: "dri2"
- [ 37.975] (II) Module "dri2" already built-in
- [ 37.975] (II) UnloadModule: "vesa"
- [ 37.975] (II) Unloading vesa
- [ 37.975] (II) UnloadModule: "modesetting"
- [ 37.975] (II) Unloading modesetting
- [ 37.975] (II) UnloadModule: "fbdev"
- [ 37.975] (II) Unloading fbdev
- [ 37.976] (II) UnloadSubModule: "fbdevhw"
- [ 37.976] (II) Unloading fbdevhw
- [ 37.976] (==) Depth 24 pixmap format is 32 bpp
- [ 37.976] (II) intel(0): [DRI2] Setup complete
- [ 37.976] (II) intel(0): [DRI2] DRI driver: i915
- [ 37.976] (II) intel(0): Allocated new frame buffer 2688x1024 stride 10752, untiled
- [ 37.977] (II) UXA(0): Driver registered support for the following operations:
- [ 37.977] (II) solid
- [ 37.977] (II) copy
- [ 37.977] (II) composite (RENDER acceleration)
- [ 37.977] (II) put_image
- [ 37.977] (II) get_image
- [ 37.977] (==) intel(0): Backing store disabled
- [ 37.977] (==) intel(0): Silken mouse enabled
- [ 37.977] (II) intel(0): Initializing HW Cursor
- [ 37.978] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 37.995] (==) intel(0): DPMS enabled
- [ 37.995] (==) intel(0): Intel XvMC decoder disabled
- [ 37.995] (II) intel(0): Set up textured video
- [ 37.995] (II) intel(0): Set up overlay video
- [ 37.995] (II) intel(0): direct rendering: DRI2 Enabled
- [ 37.995] (==) intel(0): hotplug detection: "enabled"
- [ 38.040] (--) RandR disabled
- [ 38.057] (II) SELinux: Disabled on system
- [ 38.114] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
- [ 38.114] (II) AIGLX: enabled GLX_INTEL_swap_event
- [ 38.114] (II) AIGLX: enabled GLX_ARB_create_context
- [ 38.114] (II) AIGLX: enabled GLX_ARB_create_context_profile
- [ 38.114] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
- [ 38.114] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
- [ 38.114] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
- [ 38.115] (II) AIGLX: Loaded and initialized i915
- [ 38.115] (II) GLX: Initialized DRI2 GL provider for screen 0
- [ 38.116] (II) intel(0): Setting screen physical size to 700 x 270
- [ 38.261] (II) config/udev: Adding input device Power Button (/dev/input/event3)
- [ 38.261] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 38.261] (**) Power Button: Applying InputClass "system-keyboard"
- [ 38.261] (**) Power Button: Applying InputClass "system-keyboard"
- [ 38.261] (II) LoadModule: "evdev"
- [ 38.262] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
- [ 38.263] (II) Module evdev: vendor="X.Org Foundation"
- [ 38.263] compiled for 1.13.1, module version = 2.7.3
- [ 38.263] Module class: X.Org XInput Driver
- [ 38.263] ABI class: X.Org XInput driver, version 18.0
- [ 38.263] (II) Using input driver 'evdev' for 'Power Button'
- [ 38.263] (**) Power Button: always reports core events
- [ 38.263] (**) evdev: Power Button: Device: "/dev/input/event3"
- [ 38.264] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 38.264] (--) evdev: Power Button: Found keys
- [ 38.264] (II) evdev: Power Button: Configuring as keyboard
- [ 38.264] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
- [ 38.264] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
- [ 38.264] (**) Option "xkb_rules" "evdev"
- [ 38.264] (**) Option "xkb_model" "pc105"
- [ 38.264] (**) Option "xkb_layout" "us,ru"
- [ 38.264] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.386] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
- [ 38.386] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 38.386] (**) Video Bus: Applying InputClass "system-keyboard"
- [ 38.387] (**) Video Bus: Applying InputClass "system-keyboard"
- [ 38.387] (II) Using input driver 'evdev' for 'Video Bus'
- [ 38.387] (**) Video Bus: always reports core events
- [ 38.387] (**) evdev: Video Bus: Device: "/dev/input/event8"
- [ 38.387] (--) evdev: Video Bus: Vendor 0 Product 0x6
- [ 38.387] (--) evdev: Video Bus: Found keys
- [ 38.387] (II) evdev: Video Bus: Configuring as keyboard
- [ 38.387] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
- [ 38.387] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
- [ 38.387] (**) Option "xkb_rules" "evdev"
- [ 38.387] (**) Option "xkb_model" "pc105"
- [ 38.388] (**) Option "xkb_layout" "us,ru"
- [ 38.388] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.390] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
- [ 38.390] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
- [ 38.390] (**) Video Bus: Applying InputClass "system-keyboard"
- [ 38.390] (**) Video Bus: Applying InputClass "system-keyboard"
- [ 38.390] (II) Using input driver 'evdev' for 'Video Bus'
- [ 38.390] (**) Video Bus: always reports core events
- [ 38.390] (**) evdev: Video Bus: Device: "/dev/input/event7"
- [ 38.391] (--) evdev: Video Bus: Vendor 0 Product 0x6
- [ 38.391] (--) evdev: Video Bus: Found keys
- [ 38.391] (II) evdev: Video Bus: Configuring as keyboard
- [ 38.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/LNXVIDEO:00/input/input7/event7"
- [ 38.391] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
- [ 38.391] (**) Option "xkb_rules" "evdev"
- [ 38.391] (**) Option "xkb_model" "pc105"
- [ 38.391] (**) Option "xkb_layout" "us,ru"
- [ 38.391] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.394] (II) config/udev: Adding input device Power Button (/dev/input/event2)
- [ 38.394] (**) Power Button: Applying InputClass "evdev keyboard catchall"
- [ 38.394] (**) Power Button: Applying InputClass "system-keyboard"
- [ 38.394] (**) Power Button: Applying InputClass "system-keyboard"
- [ 38.394] (II) Using input driver 'evdev' for 'Power Button'
- [ 38.394] (**) Power Button: always reports core events
- [ 38.394] (**) evdev: Power Button: Device: "/dev/input/event2"
- [ 38.394] (--) evdev: Power Button: Vendor 0 Product 0x1
- [ 38.394] (--) evdev: Power Button: Found keys
- [ 38.394] (II) evdev: Power Button: Configuring as keyboard
- [ 38.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
- [ 38.395] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
- [ 38.395] (**) Option "xkb_rules" "evdev"
- [ 38.395] (**) Option "xkb_model" "pc105"
- [ 38.395] (**) Option "xkb_layout" "us,ru"
- [ 38.395] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.397] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
- [ 38.397] (II) No input driver specified, ignoring this device.
- [ 38.397] (II) This device may have been added with another device file.
- [ 38.398] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
- [ 38.399] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
- [ 38.399] (**) Sleep Button: Applying InputClass "system-keyboard"
- [ 38.399] (**) Sleep Button: Applying InputClass "system-keyboard"
- [ 38.399] (II) Using input driver 'evdev' for 'Sleep Button'
- [ 38.399] (**) Sleep Button: always reports core events
- [ 38.399] (**) evdev: Sleep Button: Device: "/dev/input/event1"
- [ 38.399] (--) evdev: Sleep Button: Vendor 0 Product 0x3
- [ 38.399] (--) evdev: Sleep Button: Found keys
- [ 38.399] (II) evdev: Sleep Button: Configuring as keyboard
- [ 38.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
- [ 38.399] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
- [ 38.400] (**) Option "xkb_rules" "evdev"
- [ 38.400] (**) Option "xkb_model" "pc105"
- [ 38.400] (**) Option "xkb_layout" "us,ru"
- [ 38.400] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.401] (II) config/udev: Adding drm device (/dev/dri/card0)
- [ 38.403] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
- [ 38.403] (II) No input driver specified, ignoring this device.
- [ 38.403] (II) This device may have been added with another device file.
- [ 38.404] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
- [ 38.404] (II) No input driver specified, ignoring this device.
- [ 38.404] (II) This device may have been added with another device file.
- [ 38.406] (II) config/udev: Adding input device USB2.0 UVC VGA WebCam (/dev/input/event6)
- [ 38.406] (**) USB2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
- [ 38.406] (**) USB2.0 UVC VGA WebCam: Applying InputClass "system-keyboard"
- [ 38.406] (**) USB2.0 UVC VGA WebCam: Applying InputClass "system-keyboard"
- [ 38.406] (II) Using input driver 'evdev' for 'USB2.0 UVC VGA WebCam'
- [ 38.406] (**) USB2.0 UVC VGA WebCam: always reports core events
- [ 38.406] (**) evdev: USB2.0 UVC VGA WebCam: Device: "/dev/input/event6"
- [ 38.407] (--) evdev: USB2.0 UVC VGA WebCam: Vendor 0x13d3 Product 0x5702
- [ 38.407] (--) evdev: USB2.0 UVC VGA WebCam: Found keys
- [ 38.407] (II) evdev: USB2.0 UVC VGA WebCam: Configuring as keyboard
- [ 38.407] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input6/event6"
- [ 38.407] (II) XINPUT: Adding extended input device "USB2.0 UVC VGA WebCam" (type: KEYBOARD, id 11)
- [ 38.407] (**) Option "xkb_rules" "evdev"
- [ 38.407] (**) Option "xkb_model" "pc105"
- [ 38.407] (**) Option "xkb_layout" "us,ru"
- [ 38.407] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.410] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11)
- [ 38.410] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
- [ 38.410] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
- [ 38.410] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
- [ 38.410] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
- [ 38.410] (**) Eee PC WMI hotkeys: always reports core events
- [ 38.410] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event11"
- [ 38.410] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
- [ 38.410] (--) evdev: Eee PC WMI hotkeys: Found keys
- [ 38.410] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
- [ 38.410] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event11"
- [ 38.411] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
- [ 38.411] (**) Option "xkb_rules" "evdev"
- [ 38.411] (**) Option "xkb_model" "pc105"
- [ 38.411] (**) Option "xkb_layout" "us,ru"
- [ 38.411] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.413] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
- [ 38.413] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
- [ 38.413] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
- [ 38.414] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
- [ 38.414] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
- [ 38.414] (**) AT Translated Set 2 keyboard: always reports core events
- [ 38.414] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
- [ 38.414] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
- [ 38.414] (--) evdev: AT Translated Set 2 keyboard: Found keys
- [ 38.414] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
- [ 38.414] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
- [ 38.414] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
- [ 38.414] (**) Option "xkb_rules" "evdev"
- [ 38.414] (**) Option "xkb_model" "pc105"
- [ 38.415] (**) Option "xkb_layout" "us,ru"
- [ 38.415] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 38.417] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
- [ 38.417] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
- [ 38.417] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
- [ 38.417] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
- [ 38.417] (II) LoadModule: "synaptics"
- [ 38.418] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
- [ 38.419] (II) Module synaptics: vendor="X.Org Foundation"
- [ 38.419] compiled for 1.13.2, module version = 1.6.3
- [ 38.419] Module class: X.Org XInput Driver
- [ 38.419] ABI class: X.Org XInput driver, version 18.0
- [ 38.419] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
- [ 38.419] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 38.419] (**) Option "Device" "/dev/input/event5"
- [ 38.447] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
- [ 38.447] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 38.448] (**) SynPS/2 Synaptics TouchPad: always reports core events
- [ 38.467] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
- [ 38.467] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
- [ 38.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
- [ 38.467] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
- [ 38.467] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
- [ 38.469] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
- [ 38.469] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
- [ 38.469] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
- [ 38.469] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
- [ 38.469] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 38.471] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
- [ 38.471] (II) No input driver specified, ignoring this device.
- [ 38.471] (II) This device may have been added with another device file.
- [ 40.344] (II) intel(0): EDID vendor "HSD", prod id 1206
- [ 40.345] (II) intel(0): Printing DDC gathered Modelines:
- [ 40.345] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
- [ 41.049] (II) intel(0): Allocated new frame buffer 1408x768 stride 8192, tiled
- [ 42.351] (II) intel(0): EDID vendor "HSD", prod id 1206
- [ 42.351] (II) intel(0): Printing DDC gathered Modelines:
- [ 42.351] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
- [ 46.006] (II) intel(0): EDID vendor "HSD", prod id 1206
- [ 46.006] (II) intel(0): Printing DDC gathered Modelines:
- [ 46.006] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
- [ 3197.831] (II) intel(0): EDID vendor "HSD", prod id 1206
- [ 3197.831] (II) intel(0): Printing DDC gathered Modelines:
- [ 3197.831] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
- [ 3248.421] (II) intel(0): EDID vendor "HSD", prod id 1206
- [ 3248.421] (II) intel(0): Printing DDC gathered Modelines:
- [ 3248.421] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
- [ 3255.092] (II) intel(0): Allocated new frame buffer 1280x1024 stride 8192, tiled
- [ 3264.461] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event12)
- [ 3264.461] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
- [ 3264.461] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
- [ 3264.461] (**) A4Tech USB Mouse: always reports core events
- [ 3264.461] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event12"
- [ 3264.462] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa
- [ 3264.462] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
- [ 3264.462] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
- [ 3264.462] (--) evdev: A4Tech USB Mouse: Found relative axes
- [ 3264.462] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
- [ 3264.462] (II) evdev: A4Tech USB Mouse: Configuring as mouse
- [ 3264.462] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
- [ 3264.462] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
- [ 3264.462] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 3264.462] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input12/event12"
- [ 3264.462] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 15)
- [ 3264.462] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
- [ 3264.463] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
- [ 3264.463] (**) A4Tech USB Mouse: (accel) acceleration profile 0
- [ 3264.464] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
- [ 3264.464] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
- [ 3264.465] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse1)
- [ 3264.465] (II) No input driver specified, ignoring this device.
- [ 3264.465] (II) This device may have been added with another device file.
- [ 3372.344] (II) intel(0): EDID vendor "HSD", prod id 1206
- [ 3372.344] (II) intel(0): Printing DDC gathered Modelines:
- [ 3372.344] (II) intel(0): Modeline "1366x768"x0.0 71.90 1366 1414 1480 1486 768 774 782 806 -hsync -vsync (48.4 kHz eP)
- [ 3372.611] (II) intel(0): EDID vendor "PHL", prod id 49163
- [ 3372.611] (II) intel(0): Using hsync ranges from config file
- [ 3372.611] (II) intel(0): Using vrefresh ranges from config file
- [ 3372.611] (II) intel(0): Printing DDC gathered Modelines:
- [ 3372.611] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
- [ 3372.611] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
- [ 3372.611] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
- [ 3372.611] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
- [ 3372.611] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
- [ 3372.611] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
- [ 3372.611] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
- [ 3372.611] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
- [ 3372.611] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
- [ 3372.611] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
- [ 3372.612] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
- [ 3372.612] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
- [ 3372.612] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
- [ 3372.612] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
- [ 3372.612] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
- [ 3372.612] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
- [ 3372.612] (II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz e)
- [ 3372.612] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
- [ 3392.098] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Wireless Device (/dev/input/mouse2)
- [ 3392.099] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "system-keyboard"
- [ 3392.099] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "system-keyboard"
- [ 3392.099] (II) No input driver specified, ignoring this device.
- [ 3392.099] (II) This device may have been added with another device file.
- [ 3392.100] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Wireless Device (/dev/input/event13)
- [ 3392.100] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall"
- [ 3392.100] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "system-keyboard"
- [ 3392.100] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "system-keyboard"
- [ 3392.100] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Wireless Device'
- [ 3392.100] (**) RAPOO RAPOO 2.4G Wireless Device: always reports core events
- [ 3392.100] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: Device: "/dev/input/event13"
- [ 3392.101] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Vendor 0x24ae Product 0x2000
- [ 3392.101] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found keys
- [ 3392.101] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Configuring as keyboard
- [ 3392.101] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input13/event13"
- [ 3392.101] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Wireless Device" (type: KEYBOARD, id 16)
- [ 3392.101] (**) Option "xkb_rules" "evdev"
- [ 3392.101] (**) Option "xkb_model" "pc105"
- [ 3392.101] (**) Option "xkb_layout" "us,ru"
- [ 3392.101] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 3392.104] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Wireless Device (/dev/input/event14)
- [ 3392.104] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "evdev pointer catchall"
- [ 3392.104] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall"
- [ 3392.104] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "system-keyboard"
- [ 3392.104] (**) RAPOO RAPOO 2.4G Wireless Device: Applying InputClass "system-keyboard"
- [ 3392.104] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Wireless Device'
- [ 3392.104] (**) RAPOO RAPOO 2.4G Wireless Device: always reports core events
- [ 3392.104] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: Device: "/dev/input/event14"
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Vendor 0x24ae Product 0x2000
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found 9 mouse buttons
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found scroll wheel(s)
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found relative axes
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found x and y relative axes
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found absolute axes
- [ 3392.104] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Forcing absolute x/y axes to exist.
- [ 3392.104] (--) evdev: RAPOO RAPOO 2.4G Wireless Device: Found keys
- [ 3392.104] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Configuring as mouse
- [ 3392.104] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Configuring as keyboard
- [ 3392.105] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: Adding scrollwheel support
- [ 3392.105] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: YAxisMapping: buttons 4 and 5
- [ 3392.105] (**) evdev: RAPOO RAPOO 2.4G Wireless Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
- [ 3392.105] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input14/event14"
- [ 3392.105] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Wireless Device" (type: KEYBOARD, id 17)
- [ 3392.105] (**) Option "xkb_rules" "evdev"
- [ 3392.105] (**) Option "xkb_model" "pc105"
- [ 3392.105] (**) Option "xkb_layout" "us,ru"
- [ 3392.105] (**) Option "xkb_options" "grp:shifts_toggle,grp_led:caps"
- [ 3392.106] (II) evdev: RAPOO RAPOO 2.4G Wireless Device: initialized for relative axes.
- [ 3392.106] (WW) evdev: RAPOO RAPOO 2.4G Wireless Device: ignoring absolute axes.
- [ 3392.107] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) keeping acceleration scheme 1
- [ 3392.107] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) acceleration profile 0
- [ 3392.107] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) acceleration factor: 2.000
- [ 3392.107] (**) RAPOO RAPOO 2.4G Wireless Device: (accel) acceleration threshold: 4
- [ 8826.777] (II) intel(0): EDID vendor "PHL", prod id 49163
- [ 8826.777] (II) intel(0): Using hsync ranges from config file
- [ 8826.777] (II) intel(0): Using vrefresh ranges from config file
- [ 8826.777] (II) intel(0): Printing DDC gathered Modelines:
- [ 8826.777] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
- [ 8826.777] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
- [ 8826.777] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
- [ 8826.777] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
- [ 8826.777] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
- [ 8826.777] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
- [ 8826.777] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
- [ 8826.778] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
- [ 8826.778] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
- [ 8826.778] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
- [ 8826.778] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz e)
- [ 8826.778] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
- [ 21002.736] (II) intel(0): EDID vendor "PHL", prod id 49163
- [ 21002.736] (II) intel(0): Using hsync ranges from config file
- [ 21002.736] (II) intel(0): Using vrefresh ranges from config file
- [ 21002.736] (II) intel(0): Printing DDC gathered Modelines:
- [ 21002.736] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
- [ 21002.737] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
- [ 21002.737] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
- [ 21002.737] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
- [ 21002.737] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
- [ 21002.737] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
- [ 21002.737] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
- [ 21002.737] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
- [ 21002.737] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
- [ 21002.737] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
- [ 21002.737] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz e)
- [ 21002.737] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
- [ 26657.255] (EE) intel(0): Failed to submit batch buffer, expect rendering corruption: Resource deadlock avoided.
- (II) AIGLX: Suspending AIGLX clients for VT switch
- [ 26825.840] (II) AIGLX: Resuming AIGLX clients after VT switch
- [ 26826.251] (II) intel(0): EDID vendor "PHL", prod id 49163
- [ 26826.251] (II) intel(0): Using hsync ranges from config file
- [ 26826.251] (II) intel(0): Using vrefresh ranges from config file
- [ 26826.251] (II) intel(0): Printing DDC gathered Modelines:
- [ 26826.251] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
- [ 26826.251] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
- [ 26826.251] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
- [ 26826.251] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
- [ 26826.251] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
- [ 26826.251] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
- [ 26826.251] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
- [ 26826.251] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
- [ 26826.251] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
- [ 26826.251] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
- [ 26826.251] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
- [ 26826.251] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
- [ 26826.252] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
- [ 26826.252] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
- [ 26826.252] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
- [ 26826.252] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
- [ 26826.252] (II) intel(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz e)
- [ 26826.252] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
- [ 26826.288] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
- [ 27034.563] (II) AIGLX: Suspending AIGLX clients for VT switch
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement