Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- $ cat /tmp/disk.log
- smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.3-calculate] (local build)
- Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Samsung SpinPoint M8 (AF)
- Device Model: ST500LM012 HN-M500MBB
- Serial Number: S2RSJAAC326074
- LU WWN Device Id: 5 0004cf 2070a4103
- Firmware Version: 2AR10002
- User Capacity: 500,107,862,016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 3.0, 3.0 Gb/s (current: 1.5 Gb/s)
- Local Time is: Wed Mar 23 18:58:43 2016 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM level is: 128 (quiet), recommended: 254
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- Read SMART Thresholds failed: scsi error medium or hardware error (serious)
- === START OF READ SMART DATA SECTION ===
- SMART Status command failed: Время ожидания соединения истекло
- SMART overall-health self-assessment test result: UNKNOWN!
- SMART Status, Attributes and Thresholds cannot be read.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 119) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: ( 6840) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 114) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 100 100 047 - 22334
- 2 Throughput_Performance -OS--K 252 252 038 - 0
- 3 Spin_Up_Time PO---K 091 091 035 - 2852
- 4 Start_Stop_Count -O--CK 098 098 050 - 2447
- 5 Reallocated_Sector_Ct PO--CK 252 252 051 - 0
- 7 Seek_Error_Rate -OSR-K 252 252 046 - 0
- 8 Seek_Time_Performance --S--K 252 252 036 - 0
- 9 Power_On_Hours -O--CK 100 100 050 - 2894
- 10 Spin_Retry_Count -O--CK 252 252 050 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 050 - 441
- 12 Power_Cycle_Count -O--CK 098 098 050 - 2467
- 191 G-Sense_Error_Rate -O---K 100 100 034 - 393
- 192 Power-Off_Retract_Count -O---K 252 252 034 - 0
- 194 Temperature_Celsius -O---- 064 041 002 - 22 (Min/Max 7/59)
- 195 Hardware_ECC_Recovered -O-RCK 100 100 058 - 0
- 196 Reallocated_Event_Count -O--CK 252 252 050 - 0
- 197 Current_Pending_Sector -O--CK 100 100 050 - 3
- 198 Offline_Uncorrectable ----CK 252 252 048 - 0
- 199 UDMA_CRC_Error_Count -OS-CK 100 100 054 - 2
- 200 Multi_Zone_Error_Rate -O-R-K 100 100 042 - 614
- 223 Load_Retry_Count -O--CK 100 100 050 - 441
- 225 Load_Cycle_Count -O--CK 097 097 050 - 38314
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- Read SMART Log Directory failed: Время ожидания соединения истекло
- ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
- Read GP Log Directory failed
- SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
- Read SMART Error Log failed: Время ожидания соединения истекло
- SMART Extended Self-test Log (GP Log 0x07) not supported
- Read SMART Self-test Log failed: Время ожидания соединения истекло
- Read SMART Selective Self-test Log failed: Время ожидания соединения истекло
- Read SCT Status failed: Время ожидания соединения истекло
- Read SCT Status failed: Время ожидания соединения истекло
- SCT (Get) Error Recovery Control command failed
- Device Statistics (GP/SMART Log 0x04) not supported
- ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
- Read SATA Phy Event Counters failed
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement