APEX Boot Loader 1.6.8-ep -- Copyright (c) 2004-2008 Marc Singer
  compiled for Embedded Projects EPLPC3131 on 2014.Jul.19-22:57:08

    APEX comes with ABSOLUTELY NO WARRANTY.  It is free software and
    you are welcome to redistribute it under certain circumstances.
    For details, refer to the file COPYING in the program source.

  apex => mem:0x11029000+0xd7f4   (55284 bytes)
  env  => lnand:512k+256k         (bad-region)

    Use the command 'help help' to get started.

# wait 2

# copy ext2://1/zImage 0x30008000
2008760 bytes transferred
# boot
ARCH_ID: 9998 (0x270e)
ATAG_HEADER
ATAG_MEM: start 0x30000000  size 0x00800000
ATAG_CMDLINE: (72 bytes) 'console=ttyS0,115200n8 root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait '
ATAG_END
Booting kernel at 0x30008000...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Linux version 3.3.0 (amr@amr-linux) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #12 Mon Jul 21 12:18:07 BST 2014
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: NXP EA313X
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 2032
Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p3 rw rootfstype=ext4 rootwait
PID hash table entries: 32 (order: -5, 128 bytes)
Dentry cache hash table entries: 1024 (order: 0, 4096 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 8MB = 8MB total
Memory: 4136k/4136k available, 4056k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc1000000 - 0xff000000   ( 992 MB)
    lowmem  : 0xc0000000 - 0xc0800000   (   8 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0386da4   (3580 kB)
      .init : 0xc0387000 - 0xc03a6000   ( 124 kB)
      .data : 0xc03a6000 - 0xc03c2c40   ( 116 kB)
       .bss : 0xc03c2c64 - 0xc03d0a14   (  56 kB)
NR_IRQS:41
irq=30 Event=0x67 bank:3 bit:7 type:3
irq=31 Event=0x7a bank:3 bit:26 type:2
irq=32 Event=0x77 bank:3 bit:23 type:2
irq=33 Event=0x7b bank:3 bit:27 type:0
irq=34 Event=0x3d bank:1 bit:29 type:2
irq=35 Event=0x5d bank:2 bit:29 type:0
irq=36 Event=0x3f bank:1 bit:31 type:0
irq=37 Event=0x18 bank:0 bit:24 type:1
irq=38 Event=0x17 bank:0 bit:23 type:0
irq=39 Event=0x55 bank:2 bit:21 type:0
irq=40 Event=0x33 bank:1 bit:19 type:1
console [ttyS0] enabled
Calibrating delay loop... 89.08 BogoMIPS (lpj=178176)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x302a37d0 - 0x302a3828
devtmpfs: initialized
NET: Registered protocol family 16
gpiochip_add: registered GPIOs 0 to 20 on device: GPIO
gpiochip_add: registered GPIOs 21 to 52 on device: EBI_MCI
gpiochip_add: registered GPIOs 53 to 62 on device: EBI_I2STX_0
gpiochip_add: registered GPIOs 63 to 63 on device: CGU
gpiochip_add: registered GPIOs 64 to 66 on device: I2SRX_0
gpiochip_add: registered GPIOs 67 to 69 on device: I2SRX_1
gpiochip_add: registered GPIOs 70 to 73 on device: I2STX_1
gpiochip_add: registered GPIOs 74 to 89 on device: EBI
gpiochip_add: registered GPIOs 90 to 91 on device: I2C1
gpiochip_add: registered GPIOs 92 to 96 on device: SPI
gpiochip_add: registered GPIOs 97 to 100 on device: NAND_CTRL
gpiochip_add: registered GPIOs 101 to 101 on device: PWM
gpiochip_add: registered GPIOs 102 to 103 on device: UART
Registering USB host 0x00001020 0x0ec00004 (3)
LPC31: Power Management init.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
NetWinder Floating Point Emulator V0.97 (double precision)
NTFS driver 2.1.30 [Flags: R/W].
msgmni has been set to 16
io scheduler noop registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
▒serial8250: ttyS0 at MMIO 0x15001000 (irq = 10) is a NXP16750
▒serial8250.0: ttyS0 at MMIO 0x15001000 (irq = 10) is a NXP16750
brd: module loaded
loop: module loaded
spi_lpc313x spi_lpc313x.0: LPC313x SPI driver
usbcore: registered new interface driver zd1211rw
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
lpc-ehci lpc-ehci.0: LPC EHCI Host Controller
lpc-ehci lpc-ehci.0: new USB bus registered, assigned bus number 1
lpc-ehci lpc-ehci.0: irq 27, io mem 0x19000000
lpc-ehci lpc-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: LPC EHCI Host Controller
usb usb1: Manufacturer: Linux 3.3.0 ehci_hcd
usb usb1: SerialNumber: lpc-ehci.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver ftdi_sio
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
cpuidle: using governor ladder
lpc313x_mmc lpc313x_mmc.0: LPC313x MMC controller at irq 26
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
NET: Registered protocol family 36
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting for root device /dev/mmcblk0p3...
mmc0: new SD card at address 0007
mmcblk0: mmc0:0007 SD02G 1.84 GiB
 mmcblk0: p1 p2 p3 p4
EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:3.
devtmpfs: mounted
Freeing init memory: 124K
EXT4-fs (mmcblk0p3): re-mounted. Opts: user_xattr,barrier=1,data=ordered
EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
Starting logging: OK
Starting mdev...
Initializing random number generator... done.
Starting network...
Starting network time protocol daemon: ntpd.

Welcome to Buildroot