API tools faq
paste
brunobf

Radxa Android Boot

brunobf
Mar 22nd, 2014
292
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 35.37 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.04 20130517
  2. In
  3. DDR3
  4. 300MHz
  5. Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-Width=16 Size=2048MB
  6. Memory OK
  7. OUT
  8. BUILD=====2
  9. SdmmcInit=0 20
  10. No.1 FLASH ID:2c 64 44 4b a9 0
  11. OK! 601583
  12. unsigned!
  13. SecureBootEn = 0 0
  14. Boot ver: 2013-12-02#2.08
  15. start_linux=====607021
  16. 2679213 Starting kernel...@0x60408000
  17.  
  18. [ 0.000000] Initializing cgroup subsys cpu
  19. [ 0.000000] Linux version 3.0.36+ (build@radxa-x1) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 SMP PREEMPT Wed Mar 12 12:28:04 CST 2014
  20. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  21. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  22. [ 0.000000] Machine: RK30board
  23. [ 0.000000] memory reserve: Memory(base:0x8f000000 size:120M) reserved for <ion>
  24. [ 0.000000] memory reserve: Memory(base:0x8d800000 size:24M) reserved for <fb0 buf>
  25. [ 0.000000] memory reserve: Memory(base:0x8d000000 size:8M) reserved for <camera_ipp_mem>
  26. [ 0.000000] memory reserve: Total reserved 152M
  27. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  28. [ 0.000000] bootconsole [earlycon0] enabled
  29. [ 0.000000] CPU SRAM: copied sram code from c0b49000 to fef00100 - fef02148
  30. [ 0.000000] CPU SRAM: copied sram data from c0b4b048 to fef02148 - fef028c8
  31. [ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q
  32. [ 0.000000] CLKDATA_MSG: pll_flag = 0x00
  33. [ 0.000000] CLKDATA_ERR: can't get a available nume and deno
  34. [ 0.000000] CLKDATA_ERR: clk_frac_div can't get rate=48000000,uart0_frac_div
  35. [ 0.000000] L310 cache controller enabled
  36. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  37. [ 0.000000] DDR DEBUG: version 1.00 20130712
  38. [ 0.000000] DDR DEBUG: DDR3 Device
  39. [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB
  40. [ 0.000000] DDR DEBUG: init success!!! freq=300MHz
  41. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
  42. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x1b, DGSL=1 extra clock, DGPS=90
  43. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
  44. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=360
  45. [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  46. [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  47. [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  48. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c313f000 s6976 r8192 d13504 u32768
  49. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 481280
  50. [ 0.000000] Kernel command line: console=ttyFIQ0 console=tty0 androidboot.console=ttyFIQ0 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init initrd=0x62000000,0x00130000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot ),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00200000@0x00080000(userdata),0x00002000@0x00280000(kpa nic),0x00100000@0x00282000(system),-@0x00382000(user) bootver=2013-12-02#2.08 firmware_ver=4.2.2
  51. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  52. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  53. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  54. [ 0.000000] Memory: 720MB 1176MB = 1896MB total
  55. [ 0.000000] Memory: 1904548k/1904548k available, 192604k reserved, 1204224K highmem
  56. [ 0.000000] Virtual kernel memory layout:
  57. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  58. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  59. [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
  60. [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  61. [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  62. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  63. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  64. [ 0.000000] .init : 0xc0408000 - 0xc0434000 ( 176 kB)
  65. [ 0.000000] .text : 0xc0434000 - 0xc0ad5d4c (6792 kB)
  66. [ 0.000000] .data : 0xc0ad6000 - 0xc0b48728 ( 458 kB)
  67. [ 0.000000] .bss : 0xc0b4c024 - 0xc15f1c58 (10904 kB)
  68. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  69. [ 0.000000] Preemptible hierarchical RCU implementation.
  70. [ 0.000000] NR_IRQS:352
  71. [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
  72. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  73. [ 0.000000] rk_timer: version 1.2
  74. [ 0.000000] Console: colour dummy device 80x30
  75. [ 0.000000] console [tty0] enabled, bootconsole disabled
  76. <hit enter to activate fiq debugger>
  77. [ 0.000000] Initializing cgroup subsys cpu
  78. [ 0.000000] Linux version 3.0.36+ (build@radxa-x1) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #5 SMP PREEMPT Wed Mar 12 12:28:04 CST 2014
  79. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  80. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  81. [ 0.000000] Machine: RK30board
  82. [ 0.000000] memory reserve: Memory(base:0x8f000000 size:120M) reserved for <ion>
  83. [ 0.000000] memory reserve: Memory(base:0x8d800000 size:24M) reserved for <fb0 buf>
  84. [ 0.000000] memory reserve: Memory(base:0x8d000000 size:8M) reserved for <camera_ipp_mem>
  85. [ 0.000000] memory reserve: Total reserved 152M
  86. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  87. [ 0.000000] bootconsole [earlycon0] enabled
  88. [ 0.000000] CPU SRAM: copied sram code from c0b49000 to fef00100 - fef02148
  89. [ 0.000000] CPU SRAM: copied sram data from c0b4b048 to fef02148 - fef028c8
  90. [ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q
  91. [ 0.000000] CLKDATA_MSG: pll_flag = 0x00
  92. [ 0.000000] CLKDATA_ERR: can't get a available nume and deno
  93. [ 0.000000] CLKDATA_ERR: clk_frac_div can't get rate=48000000,uart0_frac_div
  94. [ 0.000000] L310 cache controller enabled
  95. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  96. [ 0.000000] DDR DEBUG: version 1.00 20130712
  97. [ 0.000000] DDR DEBUG: DDR3 Device
  98. [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB
  99. [ 0.000000] DDR DEBUG: init success!!! freq=300MHz
  100. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
  101. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x1b, DGSL=1 extra clock, DGPS=90
  102. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90
  103. [ 0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=360
  104. [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  105. [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  106. [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  107. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c313f000 s6976 r8192 d13504 u32768
  108. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 481280
  109. [ 0.000000] Kernel command line: console=ttyFIQ0 console=tty0 androidboot.console=ttyFIQ0 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init initrd=0x62000000,0x00130000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot ),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00200000@0x00080000(userdata),0x00002000@0x00280000(kpa nic),0x00100000@0x00282000(system),-@0x00382000(user) bootver=2013-12-02#2.08 firmware_ver=4.2.2
  110. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  111. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  112. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  113. [ 0.000000] Memory: 720MB 1176MB = 1896MB total
  114. [ 0.000000] Memory: 1904548k/1904548k available, 192604k reserved, 1204224K highmem
  115. [ 0.000000] Virtual kernel memory layout:
  116. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  117. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  118. [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
  119. [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  120. [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  121. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  122. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  123. [ 0.000000] .init : 0xc0408000 - 0xc0434000 ( 176 kB)
  124. [ 0.000000] .text : 0xc0434000 - 0xc0ad5d4c (6792 kB)
  125. [ 0.000000] .data : 0xc0ad6000 - 0xc0b48728 ( 458 kB)
  126. [ 0.000000] .bss : 0xc0b4c024 - 0xc15f1c58 (10904 kB)
  127. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  128. [ 0.000000] Preemptible hierarchical RCU implementation.
  129. [ 0.000000] NR_IRQS:352
  130. [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
  131. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  132. [ 0.000000] rk_timer: version 1.2
  133. [ 0.000000] Console: colour dummy device 80x30
  134. [ 0.000000] console [tty0] enabled, bootconsole disabled
  135. [ 0.014646] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  136. [ 0.014679] pid_max: default: 32768 minimum: 301
  137. [ 0.014870] Mount-cache hash table entries: 512
  138. [ 0.015382] Initializing cgroup subsys debug
  139. [ 0.015404] Initializing cgroup subsys cpuacct
  140. [ 0.015444] Initializing cgroup subsys freezer
  141. [ 0.015480] CPU: Testing write buffer coherency: ok
  142. [ 0.096287] CPU1: Booted secondary processor
  143. [ 0.136278] CPU2: Booted secondary processor
  144. [ 0.176278] CPU3: Booted secondary processor
  145. [ 0.176317] Brought up 4 CPUs
  146. [ 0.176359] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
  147. [ 0.176705] devtmpfs: initialized
  148. [ 0.182608] NET: Registered protocol family 16
  149. [ 0.182710] last_log: 0xec900000 map to 0xf7004000 and copy to 0xc0b501a0 (version 2.1)
  150. [ 0.197991] DVFS MSG: AVS Value(index=0): 118 117 117 117 116 118 116 117 117 116
  151. [ 0.315962] lcdc0 is used as external display device contoller!
  152. [ 0.316012] lcdc1 is used as primary display device controller!
  153. [ 0.416292] rk29sdk_wifi_bt_gpio_control_init: init finished
  154. [ 0.420100] console [ttyFIQ0] enabled
  155. [ 0.420251] Registered FIQ tty driver ec83dcc0
  156. [ 0.924133] bio: create slab <bio-0> at 0
  157. [ 0.928542] SCSI subsystem initialized
  158. [ 0.928758] usbcore: registered new interface driver usbfs
  159. [ 0.928892] usbcore: registered new interface driver hub
  160. [ 0.943130] usbcore: registered new device driver usb
  161. [ 0.943397] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  162. [ 0.943673] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  163. [ 0.943883] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  164. [ 0.944048] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  165. [ 0.944358] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  166. [ 0.974739] rk30-adc rk30-adc: rk30 adc: driver initialized
  167. [ 0.975042] Advanced Linux Sound Architecture Driver Version 1.0.24.
  168. [ 0.975502] Bluetooth: Core ver 2.16
  169. [ 0.975588] NET: Registered protocol family 31
  170. [ 0.975645] Bluetooth: HCI device and connection manager initialized
  171. [ 0.975742] Bluetooth: HCI socket layer initialized
  172. [ 0.975803] Bluetooth: L2CAP socket layer initialized
  173. [ 0.975877] Bluetooth: SCO socket layer initialized
  174. [ 0.976930] rk fb probe ok!
  175. [ 0.981754] act8846_set_init,line=17
  176. [ 0.981807] act8846_set_init:g_pmic_type=3
  177. [ 0.983600] act8846_set_init act_dcdc1 =1200000mV end
  178. [ 0.985488] act8846_set_init vdd_core =1000000mV end
  179. [ 0.987390] act8846_set_init vdd_cpu =1000000mV end
  180. [ 0.989273] act8846_set_init act_dcdc4 =3300000mV end
  181. [ 0.990532] act8846_set_init act_ldo1 =1000000mV end
  182. [ 0.992316] act8846_set_init act_ldo2 =1200000mV end
  183. [ 0.994099] act8846_set_init act_ldo3 =1800000mV end
  184. [ 0.995897] act8846_set_init act_ldo4 =3300000mV end
  185. [ 0.997679] act8846_set_init act_ldo5 =3300000mV end
  186. [ 0.999461] act8846_set_init act_ldo6 =3300000mV end
  187. [ 1.000615] act8846_set_init act_ldo7 =1800000mV end
  188. [ 1.002397] act8846_set_init act_ldo8 =2800000mV end
  189. [ 1.002465] act8846_set_init,line=78 END
  190. [ 1.002548] i2c-core: driver [act8846] using legacy suspend method
  191. [ 1.002621] i2c-core: driver [act8846] using legacy resume method
  192. [ 1.002731] rk1000_control_probe
  193. [ 1.027708] rk1000_control_probe ok
  194. [ 1.027805] Switching to clocksource rk_timer
  195. [ 1.034558] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf709c000
  196. [ 1.034686] fb0:win0
  197. [ 1.034691] fb1:win1
  198. [ 1.034696] fb2:win2
  199. [ 1.034818] rk3188 lcdc1 clk enable...
  200. [ 1.034884] rk3188 lcdc1 clk disable...
  201. [ 1.035691] Switched to NOHz mode on CPU #0
  202. [ 1.036313] Switched to NOHz mode on CPU #2
  203. [ 1.036329] Switched to NOHz mode on CPU #3
  204. [ 1.036343] Switched to NOHz mode on CPU #1
  205. [ 1.093850] fb0:phy:8d800000>>vir:f8000000>>len:0x1800000
  206. [ 1.094138] rk_fb_register>>>>>fb0
  207. [ 1.094461] rk_fb_register>>>>>fb1
  208. [ 1.094909] rk3188 lcdc1 probe ok!
  209. [ 1.094992] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf70a8000
  210. [ 1.095086] fb0:win0
  211. [ 1.095091] fb1:win1
  212. [ 1.095096] fb2:win2
  213. [ 1.095220] rk3188 lcdc0 clk enable...
  214. [ 1.095278] rk3188 lcdc0 clk disable...
  215. [ 1.095329] fb2:phy:8d800000>>vir:f8000000>>len:0x1800000
  216. [ 1.095562] rk_fb_register>>>>>fb2
  217. [ 1.095844] rk_fb_register>>>>>fb3
  218. [ 1.095891] rk3188 lcdc0 probe ok!
  219. [ 1.157956] IT66121 probe success.
  220. [ 1.167597] cfg80211: Calling CRDA to update world regulatory domain
  221. [ 1.211758] NET: Registered protocol family 2
  222. [ 1.211931] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  223. [ 1.212349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  224. [ 1.214262] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  225. [ 1.215386] TCP: Hash tables configured (established 131072 bind 65536)
  226. [ 1.215462] TCP reno registered
  227. [ 1.215505] UDP hash table entries: 512 (order: 2, 16384 bytes)
  228. [ 1.215599] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  229. [ 1.215951] NET: Registered protocol family 1
  230. [ 1.216188] RK29 Backlight Driver Initialized.
  231. [ 1.216414] Unpacking initramfs...
  232. [ 1.279755] Freeing initrd memory: 1216K
  233. [ 1.279917] PMU: registered new PMU device of type 0
  234. [ 1.280064] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 3
  235. [ 1.280149] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 3
  236. [ 1.303083] rk3188 cpufreq version 2.1, suspend freq 816 MHz
  237. [ 1.303788] Loaded driver for PL330 DMAC-1 rk29-pl330
  238. [ 1.303856] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  239. [ 1.304090] Loaded driver for PL330 DMAC-2 rk29-pl330
  240. [ 1.304154] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  241. [ 1.331324] highmem bounce pool size: 64 pages
  242. [ 1.331581] ashmem: initialized
  243. [ 1.340591] fuse init (API version 7.16)
  244. [ 1.345333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  245. [ 1.345417] io scheduler noop registered
  246. [ 1.345465] io scheduler deadline registered
  247. [ 1.345584] io scheduler cfq registered (default)
  248. [ 1.365813] rga: Driver loaded succesfully
  249. [ 1.365949] rk3188 lcdc0 clk enable...
  250. [ 1.365999] lcdc0: dclk:148500000>>fps:60
  251. [ 1.366041] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  252. [ 1.366579] rk1000_tv ver 2.0 probe ok
  253. [ 1.366810] rk_serial.c v1.3 2012-12-14
  254. [ 1.366925] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  255. [ 1.415060] ******** Show Sink Info ********
  256. [ 1.415106] Support video mode:
  257. [ 1.415144] 1920x1080p@60Hz.
  258. [ 1.415172] 1920x1080p@50Hz.
  259. [ 1.415200] 1280x720p@60Hz.
  260. [ 1.415226] 1280x720p@50Hz.
  261. [ 1.415252] 720x576p@50Hz.
  262. [ 1.415270] 720x480p@60Hz.
  263. [ 1.415296] Support audio type: LPCM
  264. [ 1.415328] Support audio sample rate:
  265. [ 1.415361] 32000
  266. [ 1.415381] 44100
  267. [ 1.415400] 48000
  268. [ 1.415420] Support audio word lenght:
  269. [ 1.415452] 16bit
  270. [ 1.415471] 20bit
  271. [ 1.415491] 24bit
  272. [ 1.415510] Support audio type: AC3
  273. [ 1.415540] Support audio sample rate:
  274. [ 1.415574] 32000
  275. [ 1.415593] 44100
  276. [ 1.415612] 48000
  277. [ 1.415632] 96000
  278. [ 1.415652] 192000
  279. [ 1.415672] Support audio word lenght:
  280. [ 1.415705] 16bit
  281. [ 1.415724] 20bit
  282. [ 1.415743] 24bit
  283. [ 1.415763] Support audio type: Unkown
  284. [ 1.415795] Support audio sample rate:
  285. [ 1.415828] 32000
  286. [ 1.415848] 44100
  287. [ 1.415867] 48000
  288. [ 1.415886] Support audio word lenght:
  289. [ 1.415920] 16bit
  290. [ 1.415939] 20bit
  291. [ 1.415958] 24bit
  292. [ 1.415977] ******** Show Sink Info ********
  293. [ 1.416022] rk3188 lcdc1 clk enable...
  294. [ 1.416063] lcdc1: dclk:148500000>>fps:60
  295. [ 1.416101] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
  296. [ 1.416160] lcdc1: dclk:148500000>>fps:60
  297. [ 1.416196] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
  298. [ 1.416252] lcdc1 wakeup from standby!
  299. [ 1.416287] lcdc1 win1 open,atv layer:2
  300. [ 1.537906] rk_serial rk_serial.0: membase 0xf70c0000
  301. [ 1.537993] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  302. [ 1.697904] rk_serial rk_serial.3: membase 0xf70c8000
  303. [ 1.698114] Rockchip ion module(version: 1.0) is successfully loaded
  304. [ 1.699586] loop: module loaded
  305. [ 1.699646] Android kernel panic handler initialized (bind=kpanic)
  306. [ 2.708698] rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 56:e6:68:d7:d4:69
  307. [ 2.708812] PPP generic driver version 2.4.2
  308. [ 2.708951] PPP Deflate Compression module registered
  309. [ 2.708993] PPP BSD Compression module registered
  310. [ 2.730668] PPP MPPE Compression module registered
  311. [ 2.730719] NET: Registered protocol family 24
  312. [ 2.730813] usbcore: registered new interface driver asix
  313. [ 2.730882] usbcore: registered new interface driver cdc_ether
  314. [ 2.730947] usbcore: registered new interface driver dm9620
  315. [ 2.731010] usbcore: registered new interface driver SR9700_android
  316. [ 2.731075] usbcore: registered new interface driver net1080
  317. [ 2.731137] usbcore: registered new interface driver cdc_subset
  318. [ 2.731200] usbcore: registered new interface driver zaurus
  319. [ 2.731251] cdc_ncm: 04-Aug-2011
  320. [ 2.731295] usbcore: registered new interface driver cdc_ncm
  321. [ 2.731339] Rockchip WiFi SYS interface (V1.00) ...
  322. [ 2.731403] Initializing USB Mass Storage driver...
  323. [ 2.731466] usbcore: registered new interface driver usb-storage
  324. [ 2.731516] USB Mass Storage support registered.
  325. [ 2.731617] usbcore: registered new interface driver usbserial
  326. [ 2.731682] USB Serial support registered for generic
  327. [ 2.731743] usbcore: registered new interface driver usbserial_generic
  328. [ 2.731796] usbserial: USB Serial Driver core
  329. [ 2.731847] USB Serial support registered for GSM modem (1-port)
  330. [ 2.731925] usbcore: registered new interface driver option
  331. [ 2.731969] option: v0.7.2:USB Driver for GSM modems
  332. [ 2.732030] USB Serial support registered for usi-modem
  333. [ 2.732090] usbcore: registered new interface driver usi-modem
  334. [ 2.944040] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  335. [ 2.944095] usb20_otg usb20_otg: DWC OTG Controller
  336. [ 2.944202] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  337. [ 2.944286] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  338. [ 2.944332] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
  339. [ 2.944423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  340. [ 2.944480] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  341. [ 2.944543] usb usb1: Product: DWC OTG Controller
  342. [ 2.944582] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
  343. [ 2.944629] usb usb1: SerialNumber: usb20_otg
  344. [ 2.944939] hub 1-0:1.0: USB hub found
  345. [ 2.944984] hub 1-0:1.0: 1 port detected
  346. [ 2.947590] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
  347. [ 3.158332] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  348. [ 3.158386] usb20_host usb20_host: DWC OTG Controller
  349. [ 3.158470] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  350. [ 3.158551] usb20_host usb20_host: irq 49, io mem 0x00000000
  351. [ 3.158635] DWC_OTG: Init: Port Power? op_state=1
  352. [ 3.158676] DWC_OTG: Init: Power Port (0)
  353. [ 3.158740] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  354. [ 3.158799] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  355. [ 3.158858] usb usb2: Product: DWC OTG Controller
  356. [ 3.158897] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
  357. [ 3.158945] usb usb2: SerialNumber: usb20_host
  358. [ 3.159251] hub 2-0:1.0: USB hub found
  359. [ 3.159296] hub 2-0:1.0: 1 port detected
  360. [ 3.226016] android_usb gadget: Mass Storage Function, version: 2009/09/11
  361. [ 3.226080] android_usb gadget: Number of LUNs=2
  362. [ 3.226127] lun0: LUN: removable file: (no medium)
  363. [ 3.226165] lun1: LUN: removable file: (no medium)
  364. [ 3.226369] android_usb gadget: android_usb ready
  365. [ 3.226552] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  366. [ 3.226780] usbcore: registered new interface driver xpad
  367. [ 3.226906] ++++++++remotectl_init
  368. [ 3.226967] remotectl probe j=0x0
  369. [ 3.226997] remotectl probe j=0x1
  370. [ 3.227024] remotectl probe j=0x2
  371. [ 3.227142] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
  372. [ 3.230022] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed
  373. [ 3.235042] using rtc device, rtc_hym8563, for alarms
  374. [ 3.235098] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
  375. [ 3.235179] i2c /dev entries driver
  376. [ 3.235615] lirc_dev: IR Remote Control driver registered, major 250
  377. [ 3.235674] IR NEC protocol handler initialized
  378. [ 3.235710] IR RC5(x) protocol handler initialized
  379. [ 3.235747] IR RC6 protocol handler initialized
  380. [ 3.235783] IR JVC protocol handler initialized
  381. [ 3.235821] IR Sony protocol handler initialized
  382. [ 3.235857] IR RC5 (streamzap) protocol handler initialized
  383. [ 3.235899] IR LIRC bridge handler initialized
  384. [ 3.235935] Linux video capture interface: v2.00
  385. [ 3.236104] usbcore: registered new interface driver uvcvideo
  386. [ 3.236151] USB Video Class driver (v1.1.0)
  387. [ 3.236211] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
  388. [ 3.236252] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
  389. [ 3.236420] rk29-wdt rk29-wdt.0: starting watchdog timer
  390. [ 3.236714] device-mapper: uevent: version 1.0.3
  391. [ 3.236900] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  392. [ 3.237052] Bluetooth: HCI UART driver ver 2.2
  393. [ 3.237092] Bluetooth: HCI H4 protocol initialized
  394. [ 3.237130] Bluetooth: HCILL protocol initialized
  395. [ 3.237200] cpuidle: using governor ladder
  396. [ 3.237234] cpuidle: using governor menu
  397. [ 3.282647]
  398. [ 3.282650] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
  399. [ 3.287724] rk29_sdmmc_change_clk_div..1961.. newDiv=63, newCLK=297Khz [sd_mmc]
  400. [ 3.287816] .Line3978..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sd_mmc]
  401. [ 3.288025] .Line3978..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sdio]
  402. [ 3.289148] usbcore: registered new interface driver usbhid
  403. [ 3.289197] usbhid: USB HID core driver
  404. [ 3.289508] logger: created 256K log 'log_main'
  405. [ 3.289603] logger: created 256K log 'log_events'
  406. [ 3.289689] logger: created 256K log 'log_radio'
  407. [ 3.289771] logger: created 256K log 'log_system'
  408. [ 3.290156] i2c-core: driver [RK1000_CODEC] using legacy suspend method
  409. [ 3.290211] i2c-core: driver [RK1000_CODEC] using legacy resume method
  410. [ 3.331827] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sd_mmc]
  411. [ 3.333635] rk29_sdmmc_command_complete..2958...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sd_mmc]
  412. [ 3.407172]
  413. [ 3.407175] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
  414. [ 3.417939] rk29_sdmmc_change_clk_div..1961.. newDiv=42, newCLK=297Khz [sdio]
  415. [ 3.488518] RK1000_CODEC 4-0060: Failed to add route Left DAC->Left Mixer
  416. [ 3.599223] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok
  417. [ 3.599621] ALSA device list:
  418. [ 3.599652] #0: RK29_RK1000
  419. [ 3.599755] GACT probability NOT on
  420. [ 3.599791] Mirror/redirect action on
  421. [ 3.599823] u32 classifier
  422. [ 3.599846] Actions configured
  423. [ 3.599876] Netfilter messages via NETLINK v0.30.
  424. [ 3.599948] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  425. [ 3.600259] ctnetlink v0.93: registering with nfnetlink.
  426. [ 3.600331] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  427. [ 3.600387] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  428. [ 3.600692] xt_time: kernel timezone is -0000
  429. [ 3.600854] ip_tables: (C) 2000-2006 Netfilter Core Team
  430. [ 3.601007] arp_tables: (C) 2002 David S. Miller
  431. [ 3.601081] TCP cubic registered
  432. [ 3.601112] Initializing XFRM netlink socket
  433. [ 3.601485] NET: Registered protocol family 10
  434. [ 3.602092] Mobile IPv6
  435. [ 3.602143] ip6_tables: (C) 2000-2006 Netfilter Core Team
  436. [ 3.602272] IPv6 over IPv4 tunneling driver
  437. [ 3.602860] NET: Registered protocol family 17
  438. [ 3.602923] NET: Registered protocol family 15
  439. [ 3.618038] Bluetooth: RFCOMM TTY layer initialized
  440. [ 3.618113] Bluetooth: RFCOMM socket layer initialized
  441. [ 3.618158] Bluetooth: RFCOMM ver 1.11
  442. [ 3.618196] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  443. [ 3.618265] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  444. [ 3.618469] NET: Registered protocol family 35
  445. [ 3.618579] [BT_RFKILL]: Enter rfkill_rk_init
  446. [ 3.618781] [BT_RFKILL]: Request irq for bt wakeup host
  447. [ 3.618835] [BT_RFKILL]: ** disable irq
  448. [ 3.647904] [BT_RFKILL]: bt shut off power
  449. [ 3.677891] [BT_RFKILL]: bt_default device registered.
  450. [ 3.751153] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  451. [ 3.751262] Registering SWP/SWPB emulation handler
  452. [ 3.751705] ddrfreq: verion 2.4 20130427
  453. [ 3.751748] ddrfreq: normal 396MHz video 300MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 300MHz
  454. [ 3.752739] ddrfreq: change freq to 396 MHz when normal
  455. [ 3.754090] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:00 UTC (1293883200)
  456. [ 3.754108] rk3066b-camera version: v0.2.31 Zoom by ipp
  457. [ 3.756968] asoc: dit-hifi <-> rk-spdif.0 mapping ok
  458. [ 3.757380] usbcore: registered new interface driver snd-usb-audio
  459. [ 3.757510] Freeing init memory: 176K
  460. [ 3.763764] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  461. [ 3.775272] camera 33-0-ov5640_back: Probe ov5640_back failed
  462. [ 3.780259] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
  463. [ 3.780473] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
  464. [ 3.780668] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
  465. [ 3.780732]
  466. [ 3.780735] ov2659 write reg(0x103, val:0x1) failed, try to write again!
  467. [ 3.780937] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
  468. [ 3.781134] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
  469. [ 3.781331] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
  470. [ 3.781397]
  471. [ 3.781399] ov2659 write reg(0x103, val:0x1) failed, try to write again!
  472. [ 3.781603] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
  473. [ 3.781801] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
  474. [ 3.781994] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
  475. [ 3.782056]
  476. [ 3.782058] ov2659 write reg(0x103, val:0x1) failed, try to write again!
  477. [ 3.782130] soft reset ov2659 failed
  478. [ 3.782235] camera 33-1-ov2659_front: Probe ov2659_front failed
  479. [ 3.795234] keychord: using input dev rk29-keypad for fevent
  480. [ 3.795285] keychord: using input dev rkxx-remotectl for fevent
  481. [ 3.795471] init: cannot open '/initlogo.rle'
  482. [ 3.877722] gp_rknand_info = : 0xecaed400
  483. [ 3.877820] rk30_chip_set:1
  484. [ 3.877923] FtlInit!
  485. [ 3.877960] No.1 FLASH ID:2c 64 44 4b a9 0
  486. [ 3.879083] FTL version: 5.0.8 20131204
  487. [ 3.986483] gBootMedia = 1 gSdmmcFwPartOffset =0!
  488. [ 3.986526] rknand_buffer.c version: 4.40 20130830!
  489. [ 3.986720] 10 cmdlinepart partitions found on MTD device rk29xxnand
  490. [ 3.986770] Creating 10 MTD partitions on "rk29xxnand":
  491. [ 3.986811] 0x000000400000-0x000000800000 : "misc"
  492. [ 3.987728] 0x000000800000-0x000001000000 : "kernel"
  493. [ 3.988503] 0x000001000000-0x000002000000 : "boot"
  494. [ 3.989244] 0x000002000000-0x000004000000 : "recovery"
  495. [ 3.989963] 0x000004000000-0x000008000000 : "backup"
  496. [ 3.990718] 0x000008000000-0x000010000000 : "cache"
  497. [ 3.991540] 0x000010000000-0x000050000000 : "userdata"
  498. [ 3.992893] 0x000050000000-0x000050400000 : "kpanic"
  499. [ 3.994306] apanic: Bound to mtd partition 'kpanic'
  500. [ 3.994349] apanic: No panic data available
  501. [ 3.994386] 0x000050400000-0x000070400000 : "system"
  502. [ 3.995262] 0x000070400000-0x0001df400000 : "user"
  503. [ 4.079548] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  504. [ 4.762732] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  505. [ 4.801185] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  506. [ 4.813557] UMP: Using OS memory backend, allocation limit: 1073741824
  507. [ 4.813625] UMP: UMP device driver loaded
  508. [ 4.830014] Mali: Mali400 inside of rk3188!
  509. [ 4.830066] Mali: mali freq table num : 6
  510. [ 4.830096] Mali: mali freq table :Mali: 119,Mali: 198,Mali: 198,Mali: 300,Mali: 300,Mali: 594,Mali:
  511. [ 4.830184] Mali: init mali clock success
  512. [ 4.836212] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@
  513. [ 4.847273] mirroring: Unknown symbol video_data_to_mirroring (err 0)
  514. [ 4.847354] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
  515. [ 4.858049] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
  516. [ 4.858903] ipp irq 47
  517. [ 4.859185] IPP init, version rk30-ipp 1.003
  518. [ 4.897083] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  519. [ 4.958312] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  520. [ 4.990656] init: cannot find '/system/bin/akmd', disabling 'akmd'
  521. [ 4.990794] init: cannot find '/system/bin/wlan_mac', disabling 'wlan_mac'
  522. [ 4.990993] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
  523. [ 4.996672] vpu: power on
  524. [ 4.996757] VPU_SERVICE: checking hw id 4831
  525. [ 4.997472] vpu: power off...done
  526. [ 4.997533] VPU_SERVICE: init success
  527. [ 5.008706] rtk_btusb: Realtek Bluetooth USB driver ver 0.9
  528. [ 5.008902] usbcore: registered new interface driver rtk_btusb
  529. [ 5.011266] lcdc1 win0 open,atv layer:3
  530. [ 5.011331] lcdc1 win0 closed,atv layer:2
  531. [ 5.011406] lcdc0: dclk:148500000>>fps:60
  532. [ 5.011456] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  533. [ 5.011557] lcdc0 wakeup from standby!
  534. [ 5.011605] lcdc0 win0 open,atv layer:1
  535. [ 5.011662] no layer of lcdc0 is used,go to standby!
  536. [ 5.011735] rk3188 lcdc0 clk disable...
  537. [ 5.011780] lcdc0 win0 closed,atv layer:0
  538. [ 5.017194] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  539. [ 5.017307] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  540. [ 5.017759] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  541. [ 5.168778] android_usb: already disabled
  542. [ 5.169042] android_usb: already disabled
  543. [ 5.177571] adb_open
  544. [ 5.177612] mtp_bind_config
  545. [ 5.314712] RKNAND_GET_DRM_KEY
  546. [ 5.314767] return ret = 0
  547. shell@android:/ $ [ 5.401496] .428.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
  548. [ 5.401585] .459.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
  549. [ 5.401741]
  550. [ 5.401746] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
  551. [ 5.422716] lcdc1: dclk:74250000>>fps:60
  552. [ 5.422778] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
  553. [ 5.423392] lcdc1 win1 open,atv layer:2
  554. [ 5.439398] audio type: unsupported.
  555. [ 5.448800] rk29_sdmmc_command_complete..2958...CMD55(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sd_mmc]
  556. [ 5.451949] rk29_sdmmc_command_complete..2958...CMD1(arg=0x0), hoststate=1, errorTimes=1, errorStep=0x1e ! [sd_mmc]
  557. [ 5.514257] init: no such service 'ril-daemon3'
  558. [ 5.827468] rk fb use 3 buffers
  559. [ 5.858507] lcdc1 win0 open,atv layer:3
  560. [ 5.862429] lcdc1 win0 closed,atv layer:2
  561. [ 5.892061] rk30-lcdc rk30-lcdc.1: blank mode:0
  562. [ 10.796270] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  563. [ 11.188062] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  564. [ 14.141327] request_suspend_state: wakeup (3->0) at 14123434545 (2011-01-01 12:00:10.875697543 UTC)
  565. [ 14.509215] enter func vmac_open...
  566. [ 15.518152] power on phy
  567. [ 16.536808] vmac_mii_bus: probed
  568. [ 16.537044] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
  569. [ 16.537863] ADDRCONF(NETDEV_UP): eth0: link is not ready
  570. [ 16.970628] enter func vmac_close...
  571. [ 17.092236] acc_open
  572. [ 17.092292] acc_release
  573. [ 17.146834] enter func vmac_open...
  574. [ 18.147966] power on phy
  575. [ 18.977914] DWC_OTG: ********vbus detect*********************************************
  576. [ 19.164527] vmac_mii_bus: probed
  577. [ 19.165213] DWC_OTG: ********soft connect!!!*****************************************
  578. [ 19.168041] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
  579. [ 19.168840] ADDRCONF(NETDEV_UP): eth0: link is not ready
  580. [ 19.171235] DWC_OTG: USB SUSPEND
  581. [ 20.122758] qtaguid: ctrl_counterset(s 1 10048): insufficient priv from pid=428 tgid=371 uid=1000
  582. [ 20.977938] DWC_OTG: ********soft reconnect******************************************
  583. [ 21.177188] DWC_OTG: ********soft connect!!!*****************************************
  584. [ 21.180369] PHY: 0:00 - Link is Down
  585. [ 21.183197] DWC_OTG: USB SUSPEND
  586. [ 21.333998] init: sys_prop: permission denied uid:1001 name:media.cfg.audio.soundeffect
  587. [ 22.060060] init: sys_prop: permission denied uid:10048 name:sys.ghwui.version
  588. [ 22.978010] DWC_OTG: ********soft reconnect******************************************
  589. [ 23.098071] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  590. [ 23.187188] DWC_OTG: ********soft connect!!!*****************************************
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!