API tools faq
paste
Guest User

Origen Boot !SMP && CPU_IDLE

a guest
Jan 3rd, 2014
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.15 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2013.04-00512-g8870053-dirty (Jun 07 2013 - 15:59:18) for ORIGEN
  2.  
  3. CPU: Exynos4210@1000MHz
  4.  
  5. Board: ORIGEN
  6. DRAM: 1 GiB
  7. WARNING: Caches not enabled
  8. MMC: SAMSUNG SDHCI: 0
  9. In: serial
  10. Out: serial
  11. Err: serial
  12. Hit any key to stop autoboot: 0
  13. *** Downloading kernel ***
  14. reading uImage
  15. 2650184 bytes read in 1407 ms (1.8 MiB/s)
  16. *** Downloading dtb blob ***
  17. reading exynos4210-origen.dtb
  18. 27867 bytes read in 57 ms (476.6 KiB/s)
  19. ## Booting kernel from Legacy Image at 40007000 ...
  20. Image Name: Linux-3.13.0-rc6
  21. Image Type: ARM Linux Kernel Image (uncompressed)
  22. Data Size: 2650120 Bytes = 2.5 MiB
  23. Load Address: 40008000
  24. Entry Point: 40008000
  25. Verifying Checksum ... OK
  26. ## Flattened Device Tree blob at 41f00000
  27. Booting using the fdt blob at 0x41f00000
  28. Loading Kernel Image ... OK
  29. OK
  30. Loading Device Tree to 4fff6000, end 4ffffcda ... OK
  31.  
  32. Starting kernel ...
  33.  
  34. [ 0.000000] Booting Linux on physical CPU 0x0
  35. [ 0.000000] Linux version 3.13.0-rc6 (tushar@linaro) (gcc version 4.8.2 20130805 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.08 - Linaro GCC 2013.08) ) #41 PREEMP
  36. T Fri Jan 3 15:36:20 IST 2014
  37. [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c5387d
  38. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  39. [ 0.000000] Machine model: Insignal Origen evaluation board based on Exynos4210
  40. [ 0.000000] Memory policy: Data cache writeback
  41. [ 0.000000] CPU EXYNOS4210 (id 0x43210010)
  42. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  43. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
  44. [ 0.000000] Kernel command line: root=/dev/mmcblk0p3 rw rootwait console=ttySAC2,115200n8 init=/linuxrc_custom earlyprintk
  45. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  46. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  47. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  48. [ 0.000000] Memory: 1017616K/1032192K available (3572K kernel code, 230K rwdata, 1088K rodata, 200K init, 260K bss, 14576K reserved, 270336K highmem)
  49. [ 0.000000] Virtual kernel memory layout:
  50. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  51. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  52. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  53. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  54. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  55. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  56. [ 0.000000] .text : 0xc0008000 - 0xc0495390 (4661 kB)
  57. [ 0.000000] .init : 0xc0496000 - 0xc04c80dc ( 201 kB)
  58. [ 0.000000] .data : 0xc04ca000 - 0xc0503820 ( 231 kB)
  59. [ 0.000000] .bss : 0xc050382c - 0xc0544b70 ( 261 kB)
  60. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  61. [ 0.000000] Preemptible hierarchical RCU implementation.
  62. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  63. [ 0.000000] Exynos4210 clocks: sclk_apll = 1000000000, sclk_mpll = 800000000
  64. [ 0.000000] sclk_epll = 24000000, sclk_vpll = 24000000, arm_clk = 1000000000
  65. [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 10737418240000000ns
  66. [ 0.000000] Console: colour dummy device 80x30
  67. [ 0.045000] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
  68. [ 0.045000] pid_max: default: 32768 minimum: 301
  69. [ 0.045000] Mount-cache hash table entries: 512
  70. [ 0.050000] CPU: Testing write buffer coherency: ok
  71. [ 0.050000] Setting up static identity map for 0x40366da8 - 0x40366e00
  72. [ 0.050000] devtmpfs: initialized
  73. [ 0.055000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
  74. [ 0.055000] pinctrl core: initialized pinctrl subsystem
  75. [ 0.055000] regulator-dummy: no parameters
  76. [ 0.055000] NET: Registered protocol family 16
  77. [ 0.055000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  78. [ 0.060000] cpuidle: using governor ladder
  79. [ 0.060000] cpuidle: using governor menu
  80. [ 0.075000] S3C Power Management, Copyright 2004 Simtec Electronics
  81. [ 0.075000] EXYNOS4210 PMU Initialize
  82. [ 0.075000] EXYNOS: Initializing architecture
  83. [ 0.100000] bio: create slab <bio-0> at 0
  84. [ 0.100000] VMEM_VDD_2.8V: 2800 mV
  85. [ 0.100000] SCSI subsystem initialized
  86. [ 0.105000] usbcore: registered new interface driver usbfs
  87. [ 0.105000] usbcore: registered new interface driver hub
  88. [ 0.105000] usbcore: registered new device driver usb
  89. [ 0.105000] s3c-i2c 13860000.i2c: slave address 0x00
  90. [ 0.105000] s3c-i2c 13860000.i2c: bus frequency set to 19 KHz
  91. [ 0.525000] VDD_ABB_3.3V: 3300 mV
  92. [ 0.555000] VDD_ALIVE_1.1V: 1100 mV
  93. [ 0.575000] VMIPI_1.1V: 1100 mV
  94. [ 0.605000] VDD_RTC_1.8V: 1800 mV
  95. [ 0.635000] VMIPI_1.8V: 1800 mV
  96. [ 0.655000] VDD_AUD_1.8V: 1800 mV
  97. [ 0.675000] VADC_3.3V: 3300 mV
  98. [ 0.705000] DVDD_SWB_2.8V: 2800 mV
  99. [ 0.735000] VDD_PLL_1.1V: 1100 mV
  100. [ 0.755000] VDD_AUD_3V: 3000 mV
  101. [ 0.785000] AVDD18_SWB_1.8V: 1800 mV
  102. [ 0.815000] VDD_SWB_3.3V: 3300 mV
  103. [ 0.845000] VDD_MIF_1.2V: 1200 mV
  104. [ 0.865000] vdd_arm: 950 <--> 1350 mV at 1350 mV
  105. [ 0.885000] VDD_INT_1.1V: 900 <--> 1100 mV at 1100 mV
  106. [ 0.895000] VDD_G3D_1.1V: 900 <--> 1100 mV at 1100 mV
  107. [ 0.930000] VDDQ_M1M2_1.2V: 1200 mV
  108. [ 0.965000] VDD_LCD_3.3V: 3300 mV
  109. [ 0.970000] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
  110. [ 0.970000] Switched to clocksource mct-frc
  111. [ 0.995000] NET: Registered protocol family 2
  112. [ 0.995000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  113. [ 0.995000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
  114. [ 0.995000] TCP: Hash tables configured (established 8192 bind 8192)
  115. [ 0.995000] TCP: reno registered
  116. [ 0.995000] UDP hash table entries: 512 (order: 2, 24576 bytes)
  117. [ 0.995000] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  118. [ 0.995000] NET: Registered protocol family 1
  119. [ 0.995000] bounce pool size: 64 pages
  120. [ 1.015000] ROMFS MTD (C) 2007 Red Hat, Inc.
  121. [ 1.015000] msgmni has been set to 1459
  122. [ 1.015000] io scheduler noop registered
  123. [ 1.015000] io scheduler deadline registered
  124. [ 1.015000] io scheduler cfq registered (default)
  125. [ 1.030000] dma-pl330 12680000.pdma: unable to set the seg size
  126. [ 1.030000] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-1315632
  127. [ 1.035000] dma-pl330 12680000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  128. [ 1.040000] dma-pl330 12690000.pdma: unable to set the seg size
  129. [ 1.040000] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-1315632
  130. [ 1.040000] dma-pl330 12690000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  131. [ 1.045000] dma-pl330 12850000.mdma: unable to set the seg size
  132. [ 1.045000] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-1315632
  133. [ 1.045000] dma-pl330 12850000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  134. [ 1.205000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  135. [ 1.205000] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 84, base_baud = 0) is a S3C6400/10
  136. [ 1.210000] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 85, base_baud = 0) is a S3C6400/10
  137. [ 1.210000] 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 86, base_baud = 0) is a S3C6400/10
  138. [ 1.780000] console [ttySAC2] enabled
  139. [ 1.785000] 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 87, base_baud = 0) is a S3C6400/10
  140. [ 1.805000] brd: module loaded
  141. [ 1.810000] loop: module loaded
  142. [ 1.815000] usbcore: registered new interface driver asix
  143. [ 1.820000] usbcore: registered new interface driver ax88179_178a
  144. [ 1.825000] usbcore: registered new interface driver cdc_ether
  145. [ 1.830000] usbcore: registered new interface driver r815x
  146. [ 1.835000] usbcore: registered new interface driver smsc75xx
  147. [ 1.840000] usbcore: registered new interface driver smsc95xx
  148. [ 1.845000] usbcore: registered new interface driver net1080
  149. [ 1.855000] usbcore: registered new interface driver cdc_subset
  150. [ 1.860000] usbcore: registered new interface driver zaurus
  151. [ 1.865000] usbcore: registered new interface driver cdc_ncm
  152. [ 1.870000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  153. [ 1.875000] usbcore: registered new interface driver usb-storage
  154. [ 1.885000] mousedev: PS/2 mouse device common for all mice
  155. [ 1.890000] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
  156. [ 1.895000] sdhci: Secure Digital Host Controller Interface driver
  157. [ 1.905000] sdhci: Copyright(c) Pierre Ossman
  158. [ 1.910000] s3c-sdhci 12510000.sdhci: clock source 2: mmc_busclk.2 (50000000 Hz)
  159. [ 1.915000] s3c-sdhci 12510000.sdhci: dummy supplies not allowed
  160. [ 1.920000] mmc0: no vqmmc regulator found
  161. [ 1.955000] mmc0: SDHCI controller on samsung-hsmmc [12510000.sdhci] using ADMA
  162. [ 1.960000] s3c-sdhci 12530000.sdhci: clock source 2: mmc_busclk.2 (16666666 Hz)
  163. [ 1.965000] s3c-sdhci 12530000.sdhci: dummy supplies not allowed
  164. [ 1.970000] mmc1: no vqmmc regulator found
  165. [ 2.005000] mmc1: SDHCI controller on samsung-hsmmc [12530000.sdhci] using ADMA
  166. [ 2.010000] Synopsys Designware Multimedia Card Interface Driver
  167. [ 2.020000] usbcore: registered new interface driver usbhid
  168. [ 2.025000] usbhid: USB HID core driver
  169. [ 2.030000] TCP: cubic registered
  170. [ 2.035000] NET: Registered protocol family 17
  171. [ 2.040000] NET: Registered protocol family 15
  172. [ 2.045000] Registering SWP/SWPB emulation handler
  173. [ 2.050000] VDD_G3D_1.1V: disabling
  174. [ 2.060000] VADC_3.3V: disabling
  175. [ 2.065000] VDD_AUD_1.8V: disabling
  176. [ 2.075000] VMIPI_1.1V: disabling
  177. [ 2.080000] mmc1: new SDHC card at address e624
  178. [ 2.085000] isa bounce pool size: 16 pages
  179. [ 2.085000] mmcblk0: mmc1:e624 SD04G 3.69 GiB
  180. [ 2.095000] VDD_ABB_3.3V: disabling
  181. [ 2.095000] mmcblk0: p1 p2 p3
  182. [ 2.100000] input: gpio_keys.3 as /devices/gpio_keys.3/input/input0
  183. [ 2.105000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  184. [ 2.125000] EXT2-fs (mmcblk0p3): warning: mounting unchecked fs, running e2fsck is recommended
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!