Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.6.5-rdened-r1 (root@eleven) (gcc version 4.9.3 (Gentoo 4.9.3 p1.3, pie-0.6.3) ) #5 PREEMPT Thu Aug 4 20:08:22 CEST 2016
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] x86/fpu: Legacy x87 FPU detected.
- [ 0.000000] x86/fpu: Using 'eager' FPU context switches.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reseved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000007feffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000007ff0000-0x0000000007ffffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
- [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
- [ 0.000000] e820: last_pfn = 0x7ff0 max_arch_pfn = 0x100000
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
- [ 0.000000] ACPI: XSDT 0x0000000007FF0030 000034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
- [ 0.000000] ACPI: FACP 0x0000000007FF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
- [ 0.000000] ACPI: DSDT 0x0000000007FF0410 00210F (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
- [ 0.000000] ACPI: FACS 0x0000000007FF0200 000040
- [ 0.000000] ACPI: FACS 0x0000000007FF0200 000040
- [ 0.000000] ACPI: SSDT 0x0000000007FF0240 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
- [ 0.000000] 127MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 07ff0000
- [ 0.000000] low ram: 0 - 07ff0000
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000001000-0x0000000007feffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000007feffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000007feffff]
- [ 0.000000] Using APIC driver default
- [ 0.000000] Found and enabled local APIC!
- [ 0.000000] e820: [mem 0x08000000-0xfebfffff] available for PCI devices
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32398
- [ 0.000000] Kernel command line: console=ttyS0 tsc=reliable
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Memory: 124056K/130616K available (1807K kernel code, 178K rwdata, 292K rodata, 2844K init, 92K bss, 6560K reserved, 0K cma-reserved)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
- [ 0.000000] vmalloc : 0xc87f0000 - 0xfffa0000 ( 887 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB)
- [ 0.000000] .init : 0xc1248000 - 0xc150f000 (2844 kB)
- [ 0.000000] .data : 0xc1212000 - 0xc123eb80 ( 178 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc11c4001 (1808 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] NR_IRQS:2304 nr_irqs:32 16
- [ 0.000000] console [ttyS0] enabled
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] tsc: Detected 2807.871 MHz processor
- [ 0.000198] Calibrating delay loop (skipped), value calculated using timer frequency.. 5617.73 BogoMIPS (lpj=9359570)
- [ 0.006815] pid_max: default: 32768 minimum: 501
- [ 0.014204] ACPI: Core revision 20160108
- [ 0.016949] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.018693]
- [ 0.018862] ACPI: setting ELCR to 0200 (from 0e00)
- [ 0.019362] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.021348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.046709] process: using mwait in idle threads
- [ 0.048393] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
- [ 0.051022] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.051615] CPU: Intel(R) Core(TM) i7-6600U CPU @ 2.60GHz (family: 0x6, model: 0x4e, stepping: 0x3)
- [ 0.061396] Performance Events: no PMU driver, software events only.
- [ 0.065961] Enabling APIC mode: Flat. Using 0 I/O APICs
- [ 0.282264] devtmpfs: initialized
- [ 0.338946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- [ 0.392301] NET: Registered protocol family 16
- [ 0.430841] ACPI: bus type PCI registered
- [ 0.511458] bios32_service: base:000f0000 length:0000f000 entry:0000da26
- [ 0.634499] PCI: PCI BIOS revision 2.10 entry at 0xda26, last bus=0
- [ 0.727123] PCI: Using configuration type 1 for base access
- [ 0.864393] ACPI: Added _OSI(Module Device)
- [ 0.985100] ACPI: Added _OSI(Processor Device)
- [ 1.008601] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 1.020896] ACPI: Added _OSI(Processor Aggregator Device)
- [ 1.089042] ACPI: Executed 1 blocks of module-level executable AML code
- [ 1.126210] ACPI: Interpreter enabled
- [ 1.148977] ACPI: (supports S0 S5)
- [ 1.220382] ACPI: Using PIC for interrupt routing
- [ 1.238713] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.281778] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 1.316089] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
- [ 1.418621] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
- [ 1.421237] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
- [ 1.524202] PCI host bridge to bus 0000:00
- [ 1.570942] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 1.625141] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
- [ 1.691796] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 1.693773] pci_bus 0000:00: root bus resource [mem 0x08000000-0xffdfffff window]
- [ 1.765771] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 1.785531] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
- [ 1.897165] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
- [ 1.897930] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
- [ 1.949990] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
- [ 1.975369] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *9 10 11)
- [ 1.978356] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
- [ 1.979185] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
- [ 2.021239] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11)
- [ 2.077154] ACPI: Enabled 2 GPEs in block 00 to 07
- [ 2.094940] ACPI: bus type USB registered
- [ 2.096700] usbcore: registered new interface driver usbfs
- [ 2.124886] usbcore: registered new interface driver hub
- [ 2.125473] usbcore: registered new device driver usb
- [ 2.125970] PCI: Using ACPI for IRQ routing
- [ 2.127546] clocksource: Switched to clocksource refined-jiffies
- [ 2.189201] pnp: PnP ACPI init
- [ 2.195552] pnp: PnP ACPI: found 3 devices
- [ 2.198073] NET: Registered protocol family 2
- [ 2.213908] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 2.227223] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 2.277102] TCP: Hash tables configured (established 1024 bind 1024)
- [ 2.278805] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 2.290927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 2.345964] NET: Registered protocol family 1
- [ 2.684617] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 2.698418] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 2.723738] workingset: timestamp_bits=29 max_order=15 bucket_order=0
- [ 2.731595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 2.777132] io scheduler noop registered
- [ 2.799516] io scheduler deadline registered
- [ 2.821216] io scheduler cfq registered (default)
- [ 2.827159] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.850888] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
- [ 2.906201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.970993] ohci-pci: OHCI PCI platform driver
- [ 3.021935] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
- [ 3.071989] ohci-pci 0000:00:06.0: OHCI PCI host controller
- [ 3.075228] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
- [ 3.077248] ohci-pci 0000:00:06.0: irq 11, io mem 0xf0404000
- [ 3.132485] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.188137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.270816] usb usb1: Product: OHCI PCI host controller
- [ 3.310490] usb usb1: Manufacturer: Linux 4.6.5-hardened-r1 ohci_hcd
- [ 3.371205] usb usb1: SerialNumber: 0000:00:06.0
- [ 3.453310] hub 1-0:1.0: USB hub found
- [ 3.471867] hub 1-0:1.0: 12 ports detected
- [ 3.513749] uhci_hcd: USB Universal Host Controller Interface driver
- [ 3.545922] usbcore: registered new interface driver usbserial
- [ 3.585334] usbcore: registered new interface driver usbserial_generic
- [ 3.651956] usbserial: USB Serial support registered for generic
- [ 3.680852] usbcore: registered new interface driver usb_serial_simple
- [ 3.689525] usbserial: USB Serial support registered for carelink
- [ 3.754126] usbserial: USB Serial support registered for zio
- [ 3.761553] usbserial: USB Serial support registered for funsoft
- [ 3.763379] usbserial: USB Serial support registered for flashloader
- [ 3.771516] usbserial: USB Serial support registered for google
- [ 3.810482] usbserial: USB Serial support registered for vivopay
- [ 3.813313] usbserial: USB Serial support registered for moto_modem
- [ 3.814238] usbserial: USB Serial support registered for novatel_gps
- [ 3.814839] usbserial: USB Serial support registered for hp4x
- [ 3.816522] usbserial: USB Serial support registered for suunto
- [ 3.819316] usbserial: USB Serial support registered for siemens_mpi
- [ 3.825419] Using IPI Shortcut mode
- [ 3.834917] Freeing unused kernel memory: 2844K (c1248000 - c150f000)
- [ 3.859109] Write protecting the kernel text: 1812k
- [ 3.939782] Write protecting the kernel read-only data: 308k
- Welcome to 1-Click
- mount: proc mounted on /proc.
- mount: sys mounted on /sys.
- mount: dev mounted on /dev.
- * daemon not run[ 4.161249] random: adb urandom read with 1 bits of entropy available
- ning. starting it now on port 5037 *
- * daemon started successfully *
- [ 4.275826] usb 1-1: new full-speed USB device number 2 using ohci-pci
- [ 4.582925] usb 1-1: New USB device found, idVendor=1949, idProduct=000c
- [ 4.670433] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.724906] usb 1-1: Product: Android
- [ 4.727391] usb 1-1: Manufacturer: Google
- [ 4.727792] usb 1-1: SerialNumber: D0FCA0A034950277
- [ 4.972614] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28794bf4268, max_idle_ns: 440795257386 ns
- [ 5.071432] clocksource: Switched to clocksource tsc
- Hit [Enter] to continue
- Please make sure ADB is enabled on your Kindle
- and connect the device to your computer
- In case you don't already know, ADB is enabled by turning on the
- 'Settings/Device[ Options]/Developer Options/Enable ADB' option.
- If 'Developer Options' is missing in 'Settings/Device[ Options]',
- tapping 'Settings/Device[ Options]/Serial Number' seven times
- will enable it..
- Hit [Enter] to continue
- [ 11.760549] TCP: request_sock_TCP: Possible SYN flooding on port 5037. Sending cookies. Check SNMP counters.
- No device appears to be connected..
- If your device is connected, please try to disconnect and reconnect it again
- Hit [Enter] to continue[ 17.194325] usb 1-1: USB disconnect, device number 2
- [ 24.718813] usb 1-1: new full-speed USB device number 3 using ohci-pci
- [ 24.930216] usb 1-1: New USB device found, idVendor=1949, idProduct=000c
- [ 24.937312] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 24.942359] usb 1-1: Product: Android
- [ 24.942765] usb 1-1: Manufacturer: Google
- [ 24.960113] usb 1-1: SerialNumber: D0FCA0A034950277
- No device appears to be connected..
- If your device is connected, please try to disconnect and reconnect it again
- Hit [Enter] to continue
Advertisement
Add Comment
Please, Sign In to add comment