Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl -a /dev/ada0
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba 3.5" DT01ACA... Desktop HDD
- Device Model: TOSHIBA DT01ACA300
- Serial Number: 14SxxxxGS
- LU WWN Device Id: 5 000039 ff4d8690b
- Firmware Version: MX6OABB0
- User Capacity: 3,000,592,982,016 bytes [3.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun May 17 12:06:47 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 33) The self-test routine was interrupted
- by the host with a hard or soft reset.
- Total time to complete Offline
- data collection: (21648) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 361) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 70
- 3 Spin_Up_Time 0x0007 185 185 024 Pre-fail Always - 309 (Average 311)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 62
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
- 9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 7887
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 62
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 262
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 262
- 194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 23/42)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Interrupted (host reset) 10% 7863 -
- # 2 Short offline Completed without error 00% 7855 -
- # 3 Extended offline Completed without error 00% 7744 -
- # 4 Short offline Completed without error 00% 7735 -
- # 5 Extended offline Completed without error 00% 7623 -
- # 6 Short offline Completed without error 00% 7615 -
- # 7 Extended offline Completed without error 00% 7503 -
- # 8 Short offline Completed without error 00% 7495 -
- # 9 Extended offline Completed without error 00% 7383 -
- #10 Short offline Completed without error 00% 7375 -
- #11 Extended offline Completed without error 00% 7263 -
- #12 Short offline Completed without error 00% 7255 -
- #13 Extended offline Completed without error 00% 7143 -
- #14 Short offline Completed without error 00% 7135 -
- #15 Extended offline Completed without error 00% 7023 -
- #16 Short offline Completed without error 00% 7015 -
- #17 Extended offline Completed without error 00% 6903 -
- #18 Short offline Completed without error 00% 6895 -
- #19 Extended offline Completed without error 00% 6784 -
- #20 Short offline Completed without error 00% 6775 -
- #21 Extended offline Completed without error 00% 6759 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
