CNC_MILL-01.ini

# Generated by PNCconf at Fri Aug 21 17:19:15 2015
# If you make changes to this file, they will be
# overwritten when you run PNCconf again

[EMC]
MACHINE = CNC_MILL_01
DEBUG = 0

[DISPLAY]
DISPLAY = axis
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
MAX_FEED_OVERRIDE = 2.000000
MAX_SPINDLE_OVERRIDE = 1.000000
MIN_SPINDLE_OVERRIDE = 0.500000
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/jason/linuxcnc/nc_files
PYVCP = pyvcp-panel.xml
INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in
DEFAULT_LINEAR_VELOCITY = 0.250000
MAX_LINEAR_VELOCITY = 1.000000
MIN_LINEAR_VELOCITY = 0.010000
DEFAULT_ANGULAR_VELOCITY = 0.250000
MAX_ANGULAR_VELOCITY = 1.000000
MIN_ANGULAR_VELOCITY = 0.010000
EDITOR = gedit
GEOMETRY = xyz

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[RS274NGC]
PARAMETER_FILE = linuxcnc.var

[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
COMM_WAIT = 0.010
SERVO_PERIOD = 1000000

[HOSTMOT2]
# **** This is for info only ****
# DRIVER0=hm2_pci
# BOARD0=5i25

[HAL]
HALUI = halui
HALFILE = CNC_MILL_01.hal
HALFILE = custom.hal
POSTGUI_HALFILE = postgui_call_list.hal
SHUTDOWN = shutdown.hal

[HALUI]

[TRAJ]
AXES = 3
COORDINATES = X Y Z
LINEAR_UNITS = inch
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 0.17
MAX_LINEAR_VELOCITY = 1.67

[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl
TOOL_CHANGE_QUILL_UP = 1

#********************
# Axis X
#********************
[AXIS_0]
TYPE = LINEAR
HOME = -0.5
FERROR = 0.02
MIN_FERROR = 0.001
MAX_VELOCITY = 1.66666666667
MAX_ACCELERATION = 10.0
# The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION
# If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger.
STEPGEN_MAXVEL = 2.1
STEPGEN_MAXACCEL = 12.5
P = 120.0
I = 0.0
D = 0.3
FF0 = 0.0
FF1 = 1.37
FF2 = 0.008
BIAS = 0.0
DEADBAND = 0.0
MAX_OUTPUT = 10.0
ENCODER_SCALE = -10160.0
OUTPUT_SCALE = -10.0
OUTPUT_MIN_LIMIT = -10.0
OUTPUT_MAX_LIMIT = 10.0
MIN_LIMIT = -25.0
MAX_LIMIT = 1.0
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = 0.166667
HOME_LATCH_VEL = 0.016667
HOME_FINAL_VEL = 0.500000
HOME_USE_INDEX = NO
HOME_SEQUENCE = 1

#********************
# Axis Y
#********************
[AXIS_1]
TYPE = LINEAR
HOME = -0.5
FERROR = 0.02
MIN_FERROR = 0.001
MAX_VELOCITY = 1.66666666667
MAX_ACCELERATION = 10.0
# The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION
# If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger.
STEPGEN_MAXVEL = 2.1
STEPGEN_MAXACCEL = 12.5
P = 100.0
I = 0.0
D = 0.3
FF0 = 0.0
FF1 = 1.37
FF2 = 0.008
BIAS = 0.0
DEADBAND = 0.0
MAX_OUTPUT = 10.0
ENCODER_SCALE = 18143.2
OUTPUT_SCALE = 10.0
OUTPUT_MIN_LIMIT = -10.0
OUTPUT_MAX_LIMIT = 10.0
MIN_LIMIT = -15.0
MAX_LIMIT = 1.0
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = 0.166667
HOME_LATCH_VEL = 0.016667
HOME_FINAL_VEL = 0.500000
HOME_USE_INDEX = NO
HOME_SEQUENCE = 2

#********************
# Axis Z
#********************
[AXIS_2]
TYPE = LINEAR
HOME = -0.5
FERROR = 0.02
MIN_FERROR = 0.001
MAX_VELOCITY = 1.66666666667
MAX_ACCELERATION = 10.0
# The values below should be 25% larger than MAX_VELOCITY and MAX_ACCELERATION
# If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger.
STEPGEN_MAXVEL = 2.1
STEPGEN_MAXACCEL = 12.5
P = 120.0
I = 0.0
D = 1.2
FF0 = 0.0
FF1 = 1.34
FF2 = 0.007
BIAS = 0.0
DEADBAND = 0.0
MAX_OUTPUT = 10.0
ENCODER_SCALE = 20320.0
OUTPUT_SCALE = 10.0
OUTPUT_MIN_LIMIT = -10.0
OUTPUT_MAX_LIMIT = 10.0
MIN_LIMIT = -19.0
MAX_LIMIT = 1.0
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = 0.166667
HOME_LATCH_VEL = 0.016667
HOME_FINAL_VEL = 0.500000
HOME_USE_INDEX = NO
HOME_SEQUENCE = 0

#********************
# Spindle
#********************
[SPINDLE_9]
OUTPUT_SCALE = 3000.0
OUTPUT_MIN_LIMIT = 0.0
OUTPUT_MAX_LIMIT = 3000.0