API tools faq
paste
vktr2000

status-output.txt

vktr2000
Aug 30th, 2013
49
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 72.03 KB | None | 0 0
raw download clone embed print report
  1. PBX in a Flash System Information
  2. **********************************************************************
  3. * 1. I agree that I will review the contents of the file *
  4. **********************************************************************
  5. /root/status-output.txt
  6. **********************************************************************
  7. * and redact any sensitive information *
  8. * 2. I agree that I am wholly responsible for the editing of the file*
  9. **********************************************************************
  10. /root/status-output.txt
  11. **********************************************************************
  12. * *
  13. * IF YOU DO NOT AGREE WITH THESE TERMS OF USE DO NOT USE THIS FILE *
  14. * *
  15. **********************************************************************
  16. Date and Time = 20130826 139
  17. PIAF color = PURPLE
  18. Asterisk Status = ONLINE
  19. Dahdi Status = ONLINE
  20. MySql Status = ONLINE
  21. SSH Status = ONLINE
  22. Apache Status = ONLINE
  23. Iptables Status = ONLINE
  24. Ip6tables Status = OFFLINE
  25. Fail2ban Status = ONLINE
  26. IP Connect Status = ONLINE
  27. Free Disk Space = ADEQUATE
  28. Free Memory = ADEQUATE
  29. NTPD Status = ONLINE
  30. Sendmail Status = ONLINE
  31. Samba Status = OFFLINE
  32. Webmin Status = ONLINE
  33. Ethernet 0 Status = ONLINE
  34. Ethernet 1 Status = N/A
  35. Wlan Status = N/A
  36. PIAF Installed Version = 2.0.6.4
  37. Freepbx Version = 2.10.0.2
  38. Running Asterisk = 1.8.23.0
  39. Asterisk Source Version = 1.8.23.0
  40. Dahdi Source = 2.7.0
  41. Libpri Source = 1.4.12
  42. System Verified = *VERIFIED*
  43. pbx.local on 192.168.0.63 - eth0
  44. CentOS release 6.4 (Final) :32 Bit Kernel: 2.6.32-358.6.2.el6.i686
  45. ********************************************************************
  46. Ifconfig output
  47. eth0 Link encap:Ethernet HWaddr 00:03:47:F1:30:C5
  48. inet addr:192.168.0.63 Bcast:192.168.0.255 Mask:255.255.255.0
  49. inet6 addr: fe80::203:47ff:fef1:30c5/64 Scope:Link
  50. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  51. RX packets:1288229 errors:0 dropped:0 overruns:0 frame:0
  52. TX packets:1287533 errors:0 dropped:0 overruns:0 carrier:0
  53. collisions:0 txqueuelen:1000
  54. RX bytes:281271226 (268.2 MiB) TX bytes:330551399 (315.2 MiB)
  55.  
  56. lo Link encap:Local Loopback
  57. inet addr:127.0.0.1 Mask:255.0.0.0
  58. inet6 addr: ::1/128 Scope:Host
  59. UP LOOPBACK RUNNING MTU:16436 Metric:1
  60. RX packets:71201 errors:0 dropped:0 overruns:0 frame:0
  61. TX packets:71201 errors:0 dropped:0 overruns:0 carrier:0
  62. collisions:0 txqueuelen:0
  63. RX bytes:10794549 (10.2 MiB) TX bytes:10794549 (10.2 MiB)
  64.  
  65. ********************************************************************
  66. Network Configuration output ifconfig-eth0
  67. DEVICE="eth0"
  68. BOOTPROTO="dhcp"
  69. DHCP_HOSTNAME="pbx.local"
  70. HOSTNAME="pbx.local"
  71. HWADDR="00:03:47:F1:30:C5"
  72. IPV6INIT="yes"
  73. MTU="1500"
  74. NM_CONTROLLED="yes"
  75. ONBOOT="yes"
  76. TYPE="Ethernet"
  77. UUID="50e138b8-746e-499c-8fb9-dcdd4cbd2df1"
  78. ********************************************************************
  79. uname -a output
  80. Linux pbx.local 2.6.32-358.6.2.el6.i686 #1 SMP Thu May 16 18:12:13 UTC 2013 i686 i686 i386 GNU/Linux
  81. ********************************************************************
  82. Routing Info - route
  83. Kernel IP routing table
  84. Destination Gateway Genmask Flags Metric Ref Use Iface
  85. 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0
  86. link-local * 255.255.0.0 U 1002 0 0 eth0
  87. default qwestmodem.doma 0.0.0.0 UG 0 0 0 eth0
  88. ********************************************************************
  89. Free Memory free -m output
  90. total used free shared buffers cached
  91. Mem: 498 471 27 0 44 171
  92. -/+ buffers/cache: 255 243
  93. Swap: 766 15 751
  94. ********************************************************************
  95. Disk Info df output
  96. Filesystem 1K-blocks Used Available Use% Mounted on
  97. /dev/sda2 76048472 3838404 68346980 6% /
  98. tmpfs 255356 0 255356 0% /dev/shm
  99. /dev/sda1 99150 25434 68596 28% /boot
  100. ********************************************************************
  101. Output of hosts file
  102. 127.0.0.1 pbx.local localhost localhost.localdomain localhost4 localhost4.localdomain4
  103. ::1 pbx.local localhost localhost.localdomain localhost6 localhost6.localdomain6
  104. ********************************************************************
  105. fdisk -l output
  106.  
  107. Disk /dev/sda: 80.0 GB, 80026361856 bytes
  108. 255 heads, 63 sectors/track, 9729 cylinders
  109. Units = cylinders of 16065 * 512 = 8225280 bytes
  110. Sector size (logical/physical): 512 bytes / 512 bytes
  111. I/O size (minimum/optimal): 512 bytes / 512 bytes
  112. Disk identifier: 0x000540fb
  113.  
  114. Device Boot Start End Blocks Id System
  115. /dev/sda1 * 1 13 102400 83 Linux
  116. Partition 1 does not end on cylinder boundary.
  117. /dev/sda2 13 9632 77261824 83 Linux
  118. /dev/sda3 9632 9730 785408 82 Linux swap / Solaris
  119. ********************************************************************
  120. pstree -A output
  121. init-+-acpid
  122. |-atd
  123. |-auditd---{auditd}
  124. |-automount---4*[{automount}]
  125. |-bash---sh---op_server.pl
  126. |-crond
  127. |-dbus-daemon
  128. |-dhclient
  129. |-fail2ban-server---10*[{fail2ban-serve}]
  130. |-gam_server
  131. |-hald---hald-runner-+-hald-addon-acpi
  132. | `-hald-addon-inpu
  133. |-httpd---10*[httpd]
  134. |-6*[mingetty]
  135. |-miniserv.pl
  136. |-mysqld_safe---mysqld---10*[{mysqld}]
  137. |-ntpd
  138. |-portreserve
  139. |-pppoe-server
  140. |-rpc.statd
  141. |-rpcbind
  142. |-rsyslogd---3*[{rsyslogd}]
  143. |-safe_asterisk---asterisk---51*[{asterisk}]
  144. |-2*[sendmail]
  145. |-sshd-+-sshd---bash---asterisk
  146. | `-sshd---bash---sh---pstree
  147. |-udevd---2*[udevd]
  148. `-xinetd
  149. ********************************************************************
  150. lspci -tv output
  151. -[0000:00]-+-00.0 Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge
  152. +-01.0-[01]----00.0 NVIDIA Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]
  153. +-1e.0-[02]--+-08.0 Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller
  154. | +-0a.0 Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
  155. | +-0b.0 Creative Labs SB Live! EMU10k1
  156. | \-0b.1 Creative Labs SB Live! Game Port
  157. +-1f.0 Intel Corporation 82801BA ISA Bridge (LPC)
  158. +-1f.1 Intel Corporation 82801BA IDE U100 Controller
  159. +-1f.2 Intel Corporation 82801BA/BAM USB Controller #1
  160. +-1f.3 Intel Corporation 82801BA/BAM SMBus Controller
  161. \-1f.4 Intel Corporation 82801BA/BAM USB Controller #1
  162. ********************************************************************
  163. lsusb -tv output
  164. Bus# 2
  165. `-Dev# 1 Vendor 0x1d6b Product 0x0001
  166. `-Dev# 2 Vendor 0x8086 Product 0x1122
  167. `-Dev# 3 Vendor 0x047d Product 0x2043
  168. Bus# 1
  169. `-Dev# 1 Vendor 0x1d6b Product 0x0001
  170. ********************************************************************
  171. Dmidecode output
  172. # dmidecode 2.11
  173. SMBIOS 2.3 present.
  174. 55 structures occupying 1952 bytes.
  175. Table at 0x000F1090.
  176.  
  177. Handle 0x0000, DMI type 0, 20 bytes
  178. BIOS Information
  179. Vendor: Intel Corp.
  180. Version: PT84510A.15A.0005.P03.0203061931
  181. Release Date: 03/06/2002
  182. Address: 0xF0000
  183. Runtime Size: 64 kB
  184. ROM Size: 512 kB
  185. Characteristics:
  186. PCI is supported
  187. PNP is supported
  188. BIOS is upgradeable
  189. BIOS shadowing is allowed
  190. ESCD support is available
  191. Boot from CD is supported
  192. Selectable boot is supported
  193. EDD is supported
  194. Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
  195. Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
  196. 5.25"/360 kB floppy services are supported (int 13h)
  197. 5.25"/1.2 MB floppy services are supported (int 13h)
  198. 3.5"/720 kB floppy services are supported (int 13h)
  199. 3.5"/2.88 MB floppy services are supported (int 13h)
  200. Print screen service is supported (int 5h)
  201. 8042 keyboard services are supported (int 9h)
  202. Serial services are supported (int 14h)
  203. Printer services are supported (int 17h)
  204. CGA/mono video services are supported (int 10h)
  205. ACPI is supported
  206. USB legacy is supported
  207. AGP is supported
  208. LS-120 boot is supported
  209. ATAPI Zip drive boot is supported
  210. BIOS boot specification is supported
  211. Function key-initiated network boot is supported
  212.  
  213. Handle 0x0001, DMI type 1, 25 bytes
  214. System Information
  215. Manufacturer: Gateway
  216. Product Name: E-3600
  217. Version: 4000777
  218. Serial Number: XXXXXXXXX
  219. UUID: XXXXXXXXXXXXXXXXXXXXXXXXX
  220. Wake-up Type: Power Switch
  221.  
  222. Handle 0x0002, DMI type 2, 8 bytes
  223. Base Board Information
  224. Manufacturer: Intel Corporation
  225. Product Name: D845PT
  226. Version: AAA65253-303
  227. Serial Number: XXXXXXXXXXXX
  228.  
  229. Handle 0x0003, DMI type 3, 17 bytes
  230. Chassis Information
  231. Manufacturer: Gateway
  232. Type: Desktop
  233. Lock: Not Present
  234. Version: NSC08D10
  235. Serial Number: XXXXXXXXXXXX
  236. Asset Tag:
  237. Boot-up State: Unknown
  238. Power Supply State: Unknown
  239. Thermal State: Unknown
  240. Security Status: Unknown
  241. OEM Information: 0x00000000
  242.  
  243. Handle 0x0004, DMI type 4, 32 bytes
  244. Processor Information
  245. Socket Designation: J1D1
  246. Type: Central Processor
  247. Family: Pentium 4
  248. Manufacturer: Intel Corporation
  249. ID: XXXXXXXXXXXXXXXXXXX
  250. Signature: Type 0, Family 15, Model 2, Stepping 4
  251. Flags:
  252. FPU (Floating-point unit on-chip)
  253. VME (Virtual mode extension)
  254. DE (Debugging extension)
  255. PSE (Page size extension)
  256. TSC (Time stamp counter)
  257. MSR (Model specific registers)
  258. PAE (Physical address extension)
  259. MCE (Machine check exception)
  260. CX8 (CMPXCHG8 instruction supported)
  261. APIC (On-chip APIC hardware supported)
  262. SEP (Fast system call)
  263. MTRR (Memory type range registers)
  264. PGE (Page global enable)
  265. MCA (Machine check architecture)
  266. CMOV (Conditional move instruction supported)
  267. PAT (Page attribute table)
  268. PSE-36 (36-bit page size extension)
  269. CLFSH (CLFLUSH instruction supported)
  270. DS (Debug store)
  271. ACPI (ACPI supported)
  272. MMX (MMX technology supported)
  273. FXSR (FXSAVE and FXSTOR instructions supported)
  274. SSE (Streaming SIMD extensions)
  275. SSE2 (Streaming SIMD extensions 2)
  276. SS (Self-snoop)
  277. HTT (Multi-threading)
  278. TM (Thermal monitor supported)
  279. Version: Pentium(R) 4
  280. Voltage: 3.0 V
  281. External Clock: 100 MHz
  282. Max Speed: 2000 MHz
  283. Current Speed: 2000 MHz
  284. Status: Populated, Enabled
  285. Upgrade: ZIF Socket
  286. L1 Cache Handle: 0x0005
  287. L2 Cache Handle: 0x0006
  288. L3 Cache Handle: Not Provided
  289.  
  290. Handle 0x0005, DMI type 7, 19 bytes
  291. Cache Information
  292. Socket Designation: None
  293. Configuration: Enabled, Not Socketed, Level 1
  294. Operational Mode: Write Back
  295. Location: Internal
  296. Installed Size: 8 kB
  297. Maximum Size: 8 kB
  298. Supported SRAM Types:
  299. Pipeline Burst
  300. Synchronous
  301. Installed SRAM Type: Pipeline Burst Synchronous
  302. Speed: 40 ns
  303. Error Correction Type: Single-bit ECC
  304. System Type: Data
  305. Associativity: Other
  306.  
  307. Handle 0x0006, DMI type 7, 19 bytes
  308. Cache Information
  309. Socket Designation: None
  310. Configuration: Enabled, Not Socketed, Level 2
  311. Operational Mode: Write Back
  312. Location: Internal
  313. Installed Size: 512 kB
  314. Maximum Size: 512 kB
  315. Supported SRAM Types:
  316. Pipeline Burst
  317. Synchronous
  318. Installed SRAM Type: Synchronous
  319. Speed: Unknown
  320. Error Correction Type: Parity
  321. System Type: Unified
  322. Associativity: Other
  323.  
  324. Handle 0x0007, DMI type 5, 20 bytes
  325. Memory Controller Information
  326. Error Detecting Method: 32-bit ECC
  327. Error Correcting Capabilities:
  328. Single-bit Error Correcting
  329. Supported Interleave: One-way Interleave
  330. Current Interleave: One-way Interleave
  331. Maximum Memory Module Size: 1024 MB
  332. Maximum Total Memory Size: 2048 MB
  333. Supported Speeds:
  334. Other
  335. 50 ns
  336. Supported Memory Types:
  337. Other
  338. Unknown
  339. ECC
  340. DIMM
  341. SDRAM
  342. Memory Module Voltage: 3.3 V
  343. Associated Memory Slots: 2
  344. 0x0008
  345. 0x0009
  346. Enabled Error Correcting Capabilities:
  347. Single-bit Error Correcting
  348.  
  349. Handle 0x0008, DMI type 6, 12 bytes
  350. Memory Module Information
  351. Socket Designation: J5G3
  352. Bank Connections: 0 0
  353. Current Speed: 50 ns
  354. Type: DIMM
  355. Installed Size: 512 MB (Double-bank Connection)
  356. Enabled Size: 512 MB (Double-bank Connection)
  357. Error Status: OK
  358.  
  359. Handle 0x0009, DMI type 6, 12 bytes
  360. Memory Module Information
  361. Socket Designation: J5G1
  362. Bank Connections: 0 0
  363. Current Speed: Unknown
  364. Type: None
  365. Installed Size: Not Installed
  366. Enabled Size: Not Installed
  367. Error Status: OK
  368.  
  369. Handle 0x000A, DMI type 9, 13 bytes
  370. System Slot Information
  371. Designation: J6B3
  372. Type: 32-bit PCI
  373. Current Usage: Available
  374. Length: Long
  375. ID: 1
  376. Characteristics:
  377. 3.3 V is provided
  378. PME signal is supported
  379. SMBus signal is supported
  380.  
  381. Handle 0x000B, DMI type 9, 13 bytes
  382. System Slot Information
  383. Designation: J6B2
  384. Type: 32-bit PCI
  385. Current Usage: In Use
  386. Length: Long
  387. ID: 2
  388. Characteristics:
  389. 3.3 V is provided
  390. PME signal is supported
  391. SMBus signal is supported
  392.  
  393. Handle 0x000C, DMI type 9, 13 bytes
  394. System Slot Information
  395. Designation: J7B1
  396. Type: 32-bit PCI
  397. Current Usage: In Use
  398. Length: Long
  399. ID: 3
  400. Characteristics:
  401. 3.3 V is provided
  402. PME signal is supported
  403. SMBus signal is supported
  404.  
  405. Handle 0x000D, DMI type 9, 13 bytes
  406. System Slot Information
  407. Designation: J5C1
  408. Type: 32-bit AGP 4x
  409. Current Usage: In Use
  410. Length: Long
  411. ID: 4
  412. Characteristics:
  413. 5.0 V is provided
  414.  
  415. Handle 0x000E, DMI type 10, 6 bytes
  416. On Board Device Information
  417. Type: Sound
  418. Status: Disabled
  419. Description: Intel ICH2 Audio Device
  420.  
  421. Handle 0x000F, DMI type 10, 6 bytes
  422. On Board Device Information
  423. Type: Ethernet
  424. Status: Enabled
  425. Description: Intel 82562 Ethernet Device
  426.  
  427. Handle 0x0010, DMI type 8, 9 bytes
  428. Port Connector Information
  429. Internal Reference Designator: J1A2
  430. Internal Connector Type: None
  431. External Reference Designator: USB1
  432. External Connector Type: Access Bus (USB)
  433. Port Type: USB
  434.  
  435. Handle 0x0011, DMI type 8, 9 bytes
  436. Port Connector Information
  437. Internal Reference Designator: J4A2
  438. Internal Connector Type: None
  439. External Reference Designator: USB2
  440. External Connector Type: Access Bus (USB)
  441. Port Type: USB
  442.  
  443. Handle 0x0012, DMI type 8, 9 bytes
  444. Port Connector Information
  445. Internal Reference Designator: J2A1
  446. Internal Connector Type: None
  447. External Reference Designator: COM A
  448. External Connector Type: DB-9 female
  449. Port Type: Serial Port 16550A Compatible
  450.  
  451. Handle 0x0013, DMI type 8, 9 bytes
  452. Port Connector Information
  453. Internal Reference Designator: J3A1
  454. Internal Connector Type: None
  455. External Reference Designator: LPT1
  456. External Connector Type: DB-25 male
  457. Port Type: Parallel Port ECP/EPP
  458.  
  459. Handle 0x0014, DMI type 8, 9 bytes
  460. Port Connector Information
  461. Internal Reference Designator: J1A1
  462. Internal Connector Type: None
  463. External Reference Designator: Keyboard
  464. External Connector Type: PS/2
  465. Port Type: Keyboard Port
  466.  
  467. Handle 0x0015, DMI type 8, 9 bytes
  468. Port Connector Information
  469. Internal Reference Designator: J1A1
  470. Internal Connector Type: None
  471. External Reference Designator: PS2Mouse
  472. External Connector Type: PS/2
  473. Port Type: Mouse Port
  474.  
  475. Handle 0x0016, DMI type 8, 9 bytes
  476. Port Connector Information
  477. Internal Reference Designator: JA4A1
  478. Internal Connector Type: None
  479. External Reference Designator: LAN
  480. External Connector Type: RJ-45
  481. Port Type: Network Port
  482.  
  483. Handle 0x0017, DMI type 8, 9 bytes
  484. Port Connector Information
  485. Internal Reference Designator: J5A1
  486. Internal Connector Type: None
  487. External Reference Designator: Audio Mic In
  488. External Connector Type: Mini Jack (headphones)
  489. Port Type: Audio Port
  490.  
  491. Handle 0x0018, DMI type 8, 9 bytes
  492. Port Connector Information
  493. Internal Reference Designator: J5A1
  494. Internal Connector Type: None
  495. External Reference Designator: Audio Line In
  496. External Connector Type: Mini Jack (headphones)
  497. Port Type: Audio Port
  498.  
  499. Handle 0x0019, DMI type 8, 9 bytes
  500. Port Connector Information
  501. Internal Reference Designator: J5A1
  502. Internal Connector Type: None
  503. External Reference Designator: Audio Line Out
  504. External Connector Type: Mini Jack (headphones)
  505. Port Type: Audio Port
  506.  
  507. Handle 0x001A, DMI type 8, 9 bytes
  508. Port Connector Information
  509. Internal Reference Designator: J5F2 - Floppy
  510. Internal Connector Type: On Board Floppy
  511. External Reference Designator: Not Specified
  512. External Connector Type: None
  513. Port Type: Other
  514.  
  515. Handle 0x001B, DMI type 8, 9 bytes
  516. Port Connector Information
  517. Internal Reference Designator: J5F1 - PRI IDE
  518. Internal Connector Type: On Board IDE
  519. External Reference Designator: Not Specified
  520. External Connector Type: None
  521. Port Type: Other
  522.  
  523. Handle 0x001C, DMI type 8, 9 bytes
  524. Port Connector Information
  525. Internal Reference Designator: J5E4 - SEC IDE
  526. Internal Connector Type: On Board IDE
  527. External Reference Designator: Not Specified
  528. External Connector Type: None
  529. Port Type: Other
  530.  
  531. Handle 0x001D, DMI type 8, 9 bytes
  532. Port Connector Information
  533. Internal Reference Designator: J5B2 - CDIN
  534. Internal Connector Type: On Board Sound Input From CD-ROM
  535. External Reference Designator: Not Specified
  536. External Connector Type: None
  537. Port Type: Audio Port
  538.  
  539. Handle 0x001E, DMI type 8, 9 bytes
  540. Port Connector Information
  541. Internal Reference Designator: J5B1 - AUX IN
  542. Internal Connector Type: Other
  543. External Reference Designator: Not Specified
  544. External Connector Type: None
  545. Port Type: Audio Port
  546.  
  547. Handle 0x001F, DMI type 8, 9 bytes
  548. Port Connector Information
  549. Internal Reference Designator: J6F1 - Wake On Ring
  550. Internal Connector Type: Other
  551. External Reference Designator: Not Specified
  552. External Connector Type: None
  553. Port Type: Other
  554.  
  555. Handle 0x0020, DMI type 8, 9 bytes
  556. Port Connector Information
  557. Internal Reference Designator: J7F2 - SCSI LED
  558. Internal Connector Type: Other
  559. External Reference Designator: Not Specified
  560. External Connector Type: None
  561. Port Type: Other
  562.  
  563. Handle 0x0021, DMI type 8, 9 bytes
  564. Port Connector Information
  565. Internal Reference Designator: J8F1 - Control Panel
  566. Internal Connector Type: Other
  567. External Reference Designator: Not Specified
  568. External Connector Type: None
  569. Port Type: Other
  570.  
  571. Handle 0x0022, DMI type 8, 9 bytes
  572. Port Connector Information
  573. Internal Reference Designator: J1B2 - Power Supply Fan
  574. Internal Connector Type: Other
  575. External Reference Designator: Not Specified
  576. External Connector Type: None
  577. Port Type: Other
  578.  
  579. Handle 0x0023, DMI type 8, 9 bytes
  580. Port Connector Information
  581. Internal Reference Designator: J1D2 - CPU Fan
  582. Internal Connector Type: Other
  583. External Reference Designator: Not Specified
  584. External Connector Type: None
  585. Port Type: Other
  586.  
  587. Handle 0x0024, DMI type 8, 9 bytes
  588. Port Connector Information
  589. Internal Reference Designator: J6F2 - Configuration Jumper
  590. Internal Connector Type: Other
  591. External Reference Designator: Not Specified
  592. External Connector Type: None
  593. Port Type: Other
  594.  
  595. Handle 0x0025, DMI type 8, 9 bytes
  596. Port Connector Information
  597. Internal Reference Designator: J8F1 - USB Front Panel
  598. Internal Connector Type: Other
  599. External Reference Designator: Not Specified
  600. External Connector Type: None
  601. Port Type: Other
  602.  
  603. Handle 0x0026, DMI type 8, 9 bytes
  604. Port Connector Information
  605. Internal Reference Designator: J2E1 - Front Panel Audio
  606. Internal Connector Type: Other
  607. External Reference Designator: Not Specified
  608. External Connector Type: None
  609. Port Type: Other
  610.  
  611. Handle 0x0027, DMI type 8, 9 bytes
  612. Port Connector Information
  613. Internal Reference Designator: J7H1 - INTRUDER
  614. Internal Connector Type: Other
  615. External Reference Designator: Not Specified
  616. External Connector Type: None
  617. Port Type: Other
  618.  
  619. Handle 0x0028, DMI type 8, 9 bytes
  620. Port Connector Information
  621. Internal Reference Designator: LS7H1 - Internal Speaker
  622. Internal Connector Type: Other
  623. External Reference Designator: Not Specified
  624. External Connector Type: None
  625. Port Type: Other
  626.  
  627. Handle 0x0029, DMI type 12, 5 bytes
  628. System Configuration Options
  629. Option 1: J6F2 Jumper Pins 1-2 Normal Mode
  630. Option 2: J6F2 Jumper Pins 2-3 Configuration Mode
  631. Option 3: J6F2 No Jumper Recovery Mode
  632.  
  633. Handle 0x002A, DMI type 13, 22 bytes
  634. BIOS Language Information
  635. Language Description Format: Abbreviated
  636. Installable Languages: 5
  637. enUS
  638. frFR
  639. deDE
  640. esES
  641. ptBR
  642. Currently Installed Language: enUS
  643.  
  644. Handle 0x002B, DMI type 15, 33 bytes
  645. System Event Log
  646. Area Length: 4096 bytes
  647. Header Start Offset: 0x0000
  648. Header Length: 16 bytes
  649. Data Start Offset: 0x0010
  650. Access Method: Memory-mapped physical 32-bit address
  651. Access Address: 0xFFFDEF00
  652. Status: Valid, Not Full
  653. Change Token: 0x00000000
  654. Header Format: Type 1
  655. Supported Log Type Descriptors: 5
  656. Descriptor 1: POST error
  657. Data Format 1: POST results bitmap
  658. Descriptor 2: Parity memory error
  659. Data Format 2: Multiple-event
  660. Descriptor 3: I/O channel block
  661. Data Format 3: Multiple-event
  662. Descriptor 4: Single-bit ECC memory error
  663. Data Format 4: Multiple-event
  664. Descriptor 5: Multi-bit ECC memory error
  665. Data Format 5: Multiple-event
  666.  
  667. Handle 0x002C, DMI type 31, 28 bytes
  668. Boot Integrity Services Entry Point
  669. Checksum: OK
  670. 16-bit Entry Point Address: F000:6CB3
  671. 32-bit Entry Point Address: 0x000FDF04
  672.  
  673. Handle 0x002D, DMI type 18, 23 bytes
  674. 32-bit Memory Error Information
  675. Type: Unknown
  676. Granularity: Unknown
  677. Operation: Unknown
  678. Vendor Syndrome: Unknown
  679. Memory Array Address: Unknown
  680. Device Address: Unknown
  681. Resolution: Unknown
  682.  
  683. Handle 0x002E, DMI type 16, 15 bytes
  684. Physical Memory Array
  685. Location: System Board Or Motherboard
  686. Use: System Memory
  687. Error Correction Type: None
  688. Maximum Capacity: 2 GB
  689. Error Information Handle: 0x002F
  690. Number Of Devices: 2
  691.  
  692. Handle 0x002F, DMI type 19, 15 bytes
  693. Memory Array Mapped Address
  694. Starting Address: 0x00000000000
  695. Ending Address: 0x0001FFFFFFF
  696. Range Size: 512 MB
  697. Physical Array Handle: 0x002E
  698. Partition Width: 4
  699.  
  700. Handle 0x0030, DMI type 17, 23 bytes
  701. Memory Device
  702. Array Handle: 0x002E
  703. Error Information Handle: 0x002D
  704. Total Width: 64 bits
  705. Data Width: 64 bits
  706. Size: 512 MB
  707. Form Factor: DIMM
  708. Set: 3
  709. Locator: J5E3
  710. Bank Locator: DIMM0
  711. Type: DDR
  712. Type Detail: Synchronous
  713. Speed: 266 MHz
  714.  
  715. Handle 0x0031, DMI type 20, 19 bytes
  716. Memory Device Mapped Address
  717. Starting Address: 0x00000000000
  718. Ending Address: 0x0001FFFFFFF
  719. Range Size: 512 MB
  720. Physical Device Handle: 0x0030
  721. Memory Array Mapped Address Handle: 0x002F
  722. Partition Row Position: 1
  723.  
  724. Handle 0x0032, DMI type 17, 23 bytes
  725. Memory Device
  726. Array Handle: 0x002E
  727. Error Information Handle: 0x002D
  728. Total Width: Unknown
  729. Data Width: Unknown
  730. Size: No Module Installed
  731. Form Factor: Other
  732. Set: None
  733. Locator: J5E1
  734. Bank Locator: DIMM1
  735. Type: Other
  736. Type Detail: None
  737. Speed: Unknown
  738.  
  739. Handle 0x0033, DMI type 126, 19 bytes
  740. Inactive
  741.  
  742. Handle 0x0034, DMI type 32, 20 bytes
  743. System Boot Information
  744. Status: No errors detected
  745.  
  746. Handle 0x0035, DMI type 130, 12 bytes
  747. OEM-specific Type
  748. Header and Data:
  749. 82 0C 35 00 01 01 02 01 00 01 08 01
  750. Strings:
  751. Alert on LAN
  752. Intel_ICH2
  753.  
  754. Handle 0x0036, DMI type 127, 4 bytes
  755. End Of Table
  756.  
  757. ********************************************************************
  758. Dmesg output
  759. Initializing cgroup subsys cpuset
  760. Initializing cgroup subsys cpu
  761. Linux version 2.6.32-358.6.2.el6.i686 (mockbuild@c6b8.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 18:12:13 UTC 2013
  762. KERNEL supported cpus:
  763. Intel GenuineIntel
  764. AMD AuthenticAMD
  765. NSC Geode by NSC
  766. Cyrix CyrixInstead
  767. Centaur CentaurHauls
  768. Transmeta GenuineTMx86
  769. Transmeta TransmetaCPU
  770. UMC UMC UMC UMC
  771. BIOS-provided physical RAM map:
  772. BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  773. BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  774. BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
  775. BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
  776. BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data)
  777. BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
  778. BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  779. BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  780. BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
  781. BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
  782. DMI 2.3 present.
  783. SMBIOS version 2.3 @ 0xF00A0
  784. DMI: Gateway E-3600 /D845PT , BIOS PT84510A.15A.0005.P03.0203061931 03/06/2002
  785. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
  786. e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  787. last_pfn = 0x1ffc0 max_arch_pfn = 0x400000
  788. MTRR default type: uncachable
  789. MTRR fixed ranges enabled:
  790. 00000-9FFFF write-back
  791. A0000-BFFFF uncachable
  792. C0000-CFFFF write-protect
  793. D0000-DFFFF uncachable
  794. E0000-FFFFF write-protect
  795. MTRR variable ranges enabled:
  796. 0 base 000000000 mask FE0000000 write-back
  797. 1 disabled
  798. 2 disabled
  799. 3 disabled
  800. 4 disabled
  801. 5 disabled
  802. 6 disabled
  803. 7 disabled
  804. x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  805. initial memory mapped : 0 - 01000000
  806. init_memory_mapping: 0000000000000000-000000001ffc0000
  807. Using x86 segment limits to approximate NX protection
  808. 0000000000 - 0000200000 page 4k
  809. 0000200000 - 001fe00000 page 2M
  810. 001fe00000 - 001ffc0000 page 4k
  811. kernel direct mapping tables up to 1ffc0000 @ 7000-f000
  812. RAMDISK: 1f2ba000 - 1ffaf9ea
  813. ACPI: RSDP 000ff980 00014 (v00 AMI )
  814. ACPI: RSDT 1fff0000 0002C (v01 GATEWA PT84510A 20020306 MSFT 00001011)
  815. ACPI: FACP 1fff1000 00074 (v01 GATEWA PT84510A 20020306 MSFT 00001011)
  816. ACPI: DSDT 1ffe0000 0360F (v01 GATEWA PT84510A 00000002 MSFT 0100000B)
  817. ACPI: FACS 1fff8000 00040
  818. ACPI: APIC 1ffe360f 00068 (v01 GATEWA PT84510A 20020306 MSFT 00001011)
  819. ACPI: Local APIC address 0xfee00000
  820. 0MB HIGHMEM available.
  821. 511MB LOWMEM available.
  822. mapped low ram: 0 - 1ffc0000
  823. low ram: 0 - 1ffc0000
  824. node 0 low ram: 00000000 - 1ffc0000
  825. node 0 bootmap 00002000 - 00005ff8
  826. (9 early reservations) ==> bootmem [0000000000 - 001ffc0000]
  827. #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
  828. #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
  829. #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
  830. #3 [0000400000 - 0000c6f610] TEXT DATA BSS ==> [0000400000 - 0000c6f610]
  831. #4 [001f2ba000 - 001ffaf9ea] RAMDISK ==> [001f2ba000 - 001ffaf9ea]
  832. #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
  833. #6 [0000c70000 - 0000c781ec] BRK ==> [0000c70000 - 0000c781ec]
  834. #7 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000]
  835. #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
  836. Zone PFN ranges:
  837. DMA 0x00000001 -> 0x00001000
  838. Normal 0x00001000 -> 0x0001ffc0
  839. HighMem 0x0001ffc0 -> 0x0001ffc0
  840. Movable zone start PFN for each node
  841. early_node_map[2] active PFN ranges
  842. 0: 0x00000001 -> 0x0000009f
  843. 0: 0x00000100 -> 0x0001ffc0
  844. On node 0 totalpages: 130910
  845. DMA zone: 32 pages used for memmap
  846. DMA zone: 0 pages reserved
  847. DMA zone: 3966 pages, LIFO batch:0
  848. Normal zone: 992 pages used for memmap
  849. Normal zone: 125920 pages, LIFO batch:31
  850. Using APIC driver default
  851. ACPI: PM-Timer IO Port: 0x408
  852. ACPI: Local APIC address 0xfee00000
  853. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  854. ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
  855. ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
  856. ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
  857. ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  858. IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  859. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  860. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  861. ACPI: IRQ0 used by override.
  862. ACPI: IRQ2 used by override.
  863. ACPI: IRQ9 used by override.
  864. Using ACPI (MADT) for SMP configuration information
  865. SMP: Allowing 2 CPUs, 1 hotplug CPUs
  866. nr_irqs_gsi: 24
  867. PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  868. PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
  869. PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
  870. Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
  871. Booting paravirtualized kernel on bare hardware
  872. NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
  873. PERCPU: Embedded 14 pages/cpu @c1600000 s36088 r0 d21256 u1048576
  874. pcpu-alloc: s36088 r0 d21256 u1048576 alloc=1*2097152
  875. pcpu-alloc: [0] 0 1
  876. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129886
  877. Kernel command line: ro root=UUID=c1d2210b-cc7e-44bf-8465-c74667128510 rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM vga=791
  878. PID hash table entries: 2048 (order: 1, 8192 bytes)
  879. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  880. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  881. Enabling fast FPU save and restore... done.
  882. Enabling unmasked SIMD FPU exception support... done.
  883. Initializing CPU#0
  884. Initializing HighMem for node 0 (00000000:00000000)
  885. Memory: 496620k/524032k available (4419k kernel code, 26708k reserved, 2500k data, 512k init, 0k highmem)
  886. virtual kernel memory layout:
  887. fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
  888. pkmap : 0xff600000 - 0xff800000 (2048 kB)
  889. vmalloc : 0xe07c0000 - 0xff5fe000 ( 494 MB)
  890. lowmem : 0xc0000000 - 0xdffc0000 ( 511 MB)
  891. .init : 0xc0ac3000 - 0xc0b43000 ( 512 kB)
  892. .data : 0xc0850ea8 - 0xc0ac2008 (2500 kB)
  893. .text : 0xc0400000 - 0xc0850ea8 (4419 kB)
  894. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  895. Hierarchical RCU implementation.
  896. NR_IRQS:2304 nr_irqs:424
  897. Console: colour dummy device 80x25
  898. console [tty0] enabled
  899. allocated 1048576 bytes of page_cgroup
  900. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  901. Fast TSC calibration using PIT
  902. Detected 1993.566 MHz processor.
  903. Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.13 BogoMIPS (lpj=1993566)
  904. pid_max: default: 32768 minimum: 301
  905. Security Framework initialized
  906. SELinux: Initializing.
  907. SELinux: Starting in permissive mode
  908. Mount-cache hash table entries: 512
  909. Initializing cgroup subsys ns
  910. Initializing cgroup subsys cpuacct
  911. Initializing cgroup subsys memory
  912. Initializing cgroup subsys devices
  913. Initializing cgroup subsys freezer
  914. Initializing cgroup subsys net_cls
  915. Initializing cgroup subsys blkio
  916. Initializing cgroup subsys perf_event
  917. Initializing cgroup subsys net_prio
  918. CPU0: Hyper-Threading is disabled
  919. mce: CPU supports 4 MCE banks
  920. CPU0: Thermal monitoring enabled (TM1)
  921. SMP alternatives: switching to UP code
  922. ACPI: Core revision 20090903
  923. Enabling APIC mode: Flat. Using 1 I/O APICs
  924. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  925. CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
  926. Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
  927. ... version: 0
  928. ... bit width: 40
  929. ... generic registers: 18
  930. ... value mask: 000000ffffffffff
  931. ... max period: 0000007fffffffff
  932. ... fixed-purpose events: 0
  933. ... event mask: 000000000003ffff
  934. Brought up 1 CPUs
  935. Total of 1 processors activated (3987.13 BogoMIPS).
  936. sizeof(vma)=100 bytes
  937. sizeof(page)=32 bytes
  938. sizeof(inode)=352 bytes
  939. sizeof(dentry)=132 bytes
  940. sizeof(ext3inode)=508 bytes
  941. sizeof(buffer_head)=56 bytes
  942. sizeof(skbuff)=184 bytes
  943. sizeof(task_struct)=1348 bytes
  944. devtmpfs: initialized
  945. PM: Registering ACPI NVS region at 1fff8000 (32768 bytes)
  946. regulator: core version 0.5
  947. NET: Registered protocol family 16
  948. ACPI: bus type pci registered
  949. PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
  950. PCI: Using configuration type 1 for base access
  951. bio: create slab <bio-0> at 0
  952. ACPI: EC: Look up EC in DSDT
  953. ACPI: Executed 1 blocks of module-level executable AML code
  954. ACPI: Interpreter enabled
  955. ACPI: (supports S0 S1 S4 S5)
  956. ACPI: Using IOAPIC for interrupt routing
  957. ACPI: Power Resource [FDDP] (off)
  958. ACPI: Power Resource [URP1] (off)
  959. ACPI: Power Resource [URP2] (off)
  960. ACPI: Power Resource [LPTP] (off)
  961. ACPI: No dock devices found.
  962. HEST: Table not found.
  963. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  964. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  965. pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
  966. pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
  967. pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000dffff] (ignored)
  968. pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffafffff] (ignored)
  969. pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
  970. pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO
  971. pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH4 GPIO
  972. pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
  973. pci 0000:00:1f.2: reg 20: [io 0xef40-0xef5f]
  974. pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefaf]
  975. pci 0000:00:1f.4: reg 20: [io 0xef80-0xef9f]
  976. pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
  977. pci 0000:01:00.0: reg 14: [mem 0xf2000000-0xf3ffffff pref]
  978. pci 0000:01:00.0: reg 30: [mem 0xfe9f0000-0xfe9fffff pref]
  979. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  980. pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
  981. pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfe9fffff]
  982. pci 0000:00:01.0: bridge window [mem 0xf0600000-0xf46fffff pref]
  983. pci 0000:02:08.0: reg 10: [mem 0xfeaff000-0xfeafffff]
  984. pci 0000:02:08.0: reg 14: [io 0xdf00-0xdf3f]
  985. pci 0000:02:08.0: supports D1 D2
  986. pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
  987. pci 0000:02:08.0: PME# disabled
  988. pci 0000:02:0a.0: reg 10: [io 0xd800-0xd8ff]
  989. pci 0000:02:0a.0: reg 14: [mem 0xfeafe000-0xfeafefff]
  990. pci 0000:02:0a.0: supports D2
  991. pci 0000:02:0a.0: PME# supported from D0 D2 D3hot D3cold
  992. pci 0000:02:0a.0: PME# disabled
  993. pci 0000:02:0b.0: reg 10: [io 0xdf80-0xdf9f]
  994. pci 0000:02:0b.0: supports D1 D2
  995. pci 0000:02:0b.1: reg 10: [io 0xdff0-0xdff7]
  996. pci 0000:02:0b.1: supports D1 D2
  997. pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
  998. pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
  999. pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
  1000. pci 0000:00:1e.0: bridge window [mem 0xf4700000-0xf47fffff pref]
  1001. pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
  1002. pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
  1003. pci_bus 0000:00: on NUMA node 0
  1004. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  1005. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
  1006. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  1007. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
  1008. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  1009. ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
  1010. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  1011. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  1012. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  1013. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
  1014. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  1015. vgaarb: loaded
  1016. vgaarb: bridge control possible 0000:01:00.0
  1017. SCSI subsystem initialized
  1018. libata version 3.00 loaded.
  1019. usbcore: registered new interface driver usbfs
  1020. usbcore: registered new interface driver hub
  1021. usbcore: registered new device driver usb
  1022. PCI: Using ACPI for IRQ routing
  1023. PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
  1024. PCI: pci_cache_line_size set to 64 bytes
  1025. NetLabel: Initializing
  1026. NetLabel: domain hash size = 128
  1027. NetLabel: protocols = UNLABELED CIPSOv4
  1028. NetLabel: unlabeled traffic allowed by default
  1029. Switching to clocksource jiffies
  1030. pnp: PnP ACPI init
  1031. ACPI: bus type pnp registered
  1032. pnp 00:00: [io 0x0cf8-0x0cff]
  1033. pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  1034. pnp 00:01: [dma 4]
  1035. pnp 00:01: [io 0x0000-0x000f]
  1036. pnp 00:01: [io 0x0081-0x0083]
  1037. pnp 00:01: [io 0x0087]
  1038. pnp 00:01: [io 0x0089-0x008b]
  1039. pnp 00:01: [io 0x008f]
  1040. pnp 00:01: [io 0x00c0-0x00df]
  1041. pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  1042. pnp 00:02: [io 0x0070-0x0071]
  1043. pnp 00:02: [irq 8]
  1044. pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
  1045. pnp 00:03: [io 0x0061]
  1046. pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
  1047. pnp 00:04: [io 0x00f0-0x00ff]
  1048. pnp 00:04: [irq 13]
  1049. pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
  1050. pnp 00:05: [irq 12]
  1051. pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
  1052. pnp 00:06: [io 0x0060]
  1053. pnp 00:06: [io 0x0064]
  1054. pnp 00:06: [irq 1]
  1055. pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
  1056. pnp 00:07: [io 0x03f0-0x03f1]
  1057. pnp 00:07: [io 0x03f2-0x03f3]
  1058. pnp 00:07: [io 0x03f4-0x03f5]
  1059. pnp 00:07: [io 0x03f7]
  1060. pnp 00:07: [irq 6]
  1061. pnp 00:07: [dma 2]
  1062. pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
  1063. pnp 00:08: [io 0x03f8-0x03ff]
  1064. pnp 00:08: [irq 4]
  1065. pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
  1066. pnp 00:09: [io 0x0378-0x037f]
  1067. pnp 00:09: [io 0x0778-0x077f]
  1068. pnp 00:09: [irq 7]
  1069. pnp 00:09: [dma 3]
  1070. pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
  1071. pnp 00:0a: [mem 0xfff00000-0xffffffff]
  1072. pnp 00:0a: [mem 0xffb00000-0xffbfffff]
  1073. pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
  1074. pnp 00:0b: [mem 0x00000000-0x0009ffff]
  1075. pnp 00:0b: [mem 0x000e0000-0x000fffff]
  1076. pnp 00:0b: [mem 0x00100000-0x1fffffff]
  1077. pnp 00:0b: [mem 0xfec00000-0xfec00fff]
  1078. pnp 00:0b: [mem 0xfee00000-0xfee00fff]
  1079. pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
  1080. pnp: PnP ACPI: found 12 devices
  1081. ACPI: ACPI bus type pnp unregistered
  1082. system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  1083. system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
  1084. system 00:0b: [mem 0x00100000-0x1fffffff] could not be reserved
  1085. system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
  1086. system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
  1087. Switching to clocksource acpi_pm
  1088. PCI: max bus depth: 1 pci_try_num: 2
  1089. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  1090. pci 0000:00:01.0: PCI bridge to [bus 01-01]
  1091. pci 0000:00:01.0: bridge window [io disabled]
  1092. pci 0000:00:01.0: bridge window [mem 0xfc900000-0xfe9fffff]
  1093. pci 0000:00:01.0: bridge window [mem 0xf0600000-0xf46fffff pref]
  1094. pci 0000:00:1e.0: PCI bridge to [bus 02-02]
  1095. pci 0000:00:1e.0: PCI bridge to [bus 02-02]
  1096. pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
  1097. pci 0000:00:1e.0: bridge window [mem 0xfea00000-0xfeafffff]
  1098. pci 0000:00:1e.0: bridge window [mem 0xf4700000-0xf47fffff pref]
  1099. pci 0000:00:1e.0: setting latency timer to 64
  1100. pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
  1101. pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
  1102. pci_bus 0000:01: resource 1 [mem 0xfc900000-0xfe9fffff]
  1103. pci_bus 0000:01: resource 2 [mem 0xf0600000-0xf46fffff pref]
  1104. pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
  1105. pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
  1106. pci_bus 0000:02: resource 2 [mem 0xf4700000-0xf47fffff pref]
  1107. pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
  1108. pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
  1109. NET: Registered protocol family 2
  1110. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  1111. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  1112. TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  1113. TCP: Hash tables configured (established 16384 bind 16384)
  1114. TCP reno registered
  1115. NET: Registered protocol family 1
  1116. alloc irq_desc for 19 on node -1
  1117. alloc kstat_irqs on node -1
  1118. pci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  1119. pci 0000:00:1f.2: PCI INT D disabled
  1120. alloc irq_desc for 23 on node -1
  1121. alloc kstat_irqs on node -1
  1122. pci 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
  1123. pci 0000:00:1f.4: PCI INT C disabled
  1124. pci 0000:01:00.0: Boot video device
  1125. pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
  1126. Trying to unpack rootfs image as initramfs...
  1127. Freeing initrd memory: 13270k freed
  1128. apm: BIOS not found.
  1129. audit: initializing netlink socket (disabled)
  1130. type=2000 audit(1377385924.687:1): initialized
  1131. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  1132. VFS: Disk quotas dquot_6.5.2
  1133. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  1134. msgmni has been set to 996
  1135. SELinux: Registering netfilter hooks
  1136. alg: No test for stdrng (krng)
  1137. ksign: Installing public key data
  1138. Loading keyring
  1139. - Added public key 834D293187AE1760
  1140. - User ID: CentOS (Kernel Module GPG key)
  1141. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  1142. io scheduler noop registered
  1143. io scheduler anticipatory registered
  1144. io scheduler deadline registered
  1145. io scheduler cfq registered (default)
  1146. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  1147. pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  1148. acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  1149. vesafb: framebuffer at 0xf2000000, mapped to 0xe0800000, using 3072k, total 32768k
  1150. vesafb: mode is 1024x768x16, linelength=2048, pages=0
  1151. vesafb: protected mode interface info at c000:0393
  1152. vesafb: pmi: set display start = c00c03cc, set palette = c00c0442
  1153. vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
  1154. vesafb: scrolling: redraw
  1155. vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
  1156. Console: switching to colour frame buffer device 128x48
  1157. fb0: VESA VGA frame buffer device
  1158. ipmi message handler version 39.2
  1159. IPMI System Interface driver.
  1160. ipmi_si: Adding default-specified kcs state machine
  1161. ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
  1162. ipmi_si: Interface detection failed
  1163. ipmi_si: Adding default-specified smic state machine
  1164. ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
  1165. ipmi_si: Interface detection failed
  1166. ipmi_si: Adding default-specified bt state machine
  1167. ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
  1168. ipmi_si: Interface detection failed
  1169. ipmi_si: Unable to find any System Interface(s)
  1170. input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  1171. ACPI: Power Button [PBTN]
  1172. input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  1173. ACPI: Power Button [PWRF]
  1174. ACPI: acpi_idle registered with cpuidle
  1175. ERST: Table is not found!
  1176. GHES: HEST is not enabled!
  1177. isapnp: Scanning for PnP cards...
  1178. isapnp: No Plug & Play device found
  1179. Non-volatile memory driver v1.3
  1180. Linux agpgart interface v0.103
  1181. agpgart-intel 0000:00:00.0: Intel i845 Chipset
  1182. agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
  1183. crash memory driver: version 1.1
  1184. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  1185. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  1186. 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  1187. brd: module loaded
  1188. loop: module loaded
  1189. input: Macintosh mouse button emulation as /devices/virtual/input/input2
  1190. Fixed MDIO Bus: probed
  1191. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1192. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1193. uhci_hcd: USB Universal Host Controller Interface driver
  1194. uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  1195. uhci_hcd 0000:00:1f.2: setting latency timer to 64
  1196. uhci_hcd 0000:00:1f.2: UHCI Host Controller
  1197. uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
  1198. uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ef40
  1199. usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  1200. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1201. usb usb1: Product: UHCI Host Controller
  1202. usb usb1: Manufacturer: Linux 2.6.32-358.6.2.el6.i686 uhci_hcd
  1203. usb usb1: SerialNumber: XXXXXXXXXX
  1204. usb usb1: configuration #1 chosen from 1 choice
  1205. hub 1-0:1.0: USB hub found
  1206. hub 1-0:1.0: 2 ports detected
  1207. uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
  1208. uhci_hcd 0000:00:1f.4: setting latency timer to 64
  1209. uhci_hcd 0000:00:1f.4: UHCI Host Controller
  1210. uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
  1211. Refined TSC clocksource calibration: 1993.531 MHz.
  1212. uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ef80
  1213. Switching to clocksource tsc
  1214. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  1215. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1216. usb usb2: Product: UHCI Host Controller
  1217. usb usb2: Manufacturer: Linux 2.6.32-358.6.2.el6.i686 uhci_hcd
  1218. usb usb2: SerialNumber: 0000:00:1f.4
  1219. usb usb2: configuration #1 chosen from 1 choice
  1220. hub 2-0:1.0: USB hub found
  1221. hub 2-0:1.0: 2 ports detected
  1222. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  1223. serio: i8042 KBD port at 0x60,0x64 irq 1
  1224. serio: i8042 AUX port at 0x60,0x64 irq 12
  1225. mice: PS/2 mouse device common for all mice
  1226. rtc_cmos 00:02: RTC can wake from S4
  1227. rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
  1228. rtc0: alarms up to one month, 114 bytes nvram
  1229. cpuidle: using governor ladder
  1230. cpuidle: using governor menu
  1231. EFI Variables Facility v0.08 2004-May-17
  1232. usbcore: registered new interface driver hiddev
  1233. usbcore: registered new interface driver usbhid
  1234. usbhid: v2.6:USB HID core driver
  1235. TCP cubic registered
  1236. Initializing XFRM netlink socket
  1237. NET: Registered protocol family 17
  1238. Using IPI No-Shortcut mode
  1239. registered taskstats version 1
  1240. rtc_cmos 00:02: setting system clock to 2013-08-24 23:12:06 UTC (1377385926)
  1241. Initalizing network drop monitor service
  1242. Freeing unused kernel memory: 512k freed
  1243. Write protecting the kernel text: 4420k
  1244. Write protecting the kernel read-only data: 1924k
  1245. dracut: dracut-004-303.el6
  1246. dracut: rd_NO_LUKS: removing cryptoluks activation
  1247. dracut: rd_NO_LVM: removing LVM activation
  1248. usb 2-2: new full speed USB device number 2 using uhci_hcd
  1249. device-mapper: uevent: version 1.0.3
  1250. device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
  1251. udev: starting version 147
  1252. usb 2-2: New USB device found, idVendor=8086, idProduct=1122
  1253. usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  1254. ACPI: WMI: Mapper loaded
  1255. usb 2-2: configuration #1 chosen from 1 choice
  1256. hub 2-2:1.0: USB hub found
  1257. hub 2-2:1.0: 4 ports detected
  1258. [drm] Initialized drm 1.1.0 20060810
  1259. alloc irq_desc for 16 on node -1
  1260. alloc kstat_irqs on node -1
  1261. nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  1262. [drm] nouveau 0000:01:00.0: Detected an NV04 generation card (0x20154000)
  1263. checking generic (f2000000 2000000) vs hw (f2000000 2000000)
  1264. fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
  1265. Console: switching to colour dummy device 80x25
  1266. [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
  1267. [drm] nouveau 0000:01:00.0: ... appears to be valid
  1268. [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
  1269. [drm] nouveau 0000:01:00.0: BMP BIOS found
  1270. [drm] nouveau 0000:01:00.0: BMP version 5.6
  1271. [drm] nouveau 0000:01:00.0: Bios version 02.05.20.02
  1272. [drm] nouveau 0000:01:00.0: No DCB data found in VBIOS
  1273. [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
  1274. [TTM] Zone kernel: Available graphics memory: 255358 kiB
  1275. [TTM] Initializing pool allocator
  1276. [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM (SDRAM)
  1277. agpgart-intel 0000:00:00.0: AGP 2.0 bridge
  1278. agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
  1279. nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
  1280. [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
  1281. Slow work thread pool: Starting up
  1282. Slow work thread pool: Ready
  1283. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  1284. [drm] No driver support for vblank timestamp query.
  1285. [drm] nouveau 0000:01:00.0: 0 available performance level(s)
  1286. [drm] nouveau 0000:01:00.0: c: core 125MHz memory 143MHz
  1287. [drm] nouveau 0000:01:00.0: MM: using M2MF for buffer copies
  1288. [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
  1289. usb 2-2.3: new low speed USB device number 3 using uhci_hcd
  1290. [drm] nouveau 0000:01:00.0: allocated 800x600 fb: 0x44000, bo df86f600
  1291. fbcon: nouveaufb (fb0) is primary device
  1292. usb 2-2.3: New USB device found, idVendor=047d, idProduct=2043
  1293. usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1294. usb 2-2.3: Product: Kensington U+P Keyboard
  1295. usb 2-2.3: Manufacturer: NOVATEK
  1296. usb 2-2.3: configuration #1 chosen from 1 choice
  1297. [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
  1298. [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
  1299. Console: switching to colour frame buffer device 100x37
  1300. fb0: nouveaufb frame buffer device
  1301. drm: registered panic notifier
  1302. [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
  1303. input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2.3/2-2.3:1.0/input/input3
  1304. generic-usb 0003:047D:2043.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1f.4-2.3/input0
  1305. input: NOVATEK Kensington U+P Keyboard as /devices/pci0000:00/0000:00:1f.4/usb2/2-2/2-2.3/2-2.3:1.1/input/input4
  1306. generic-usb 0003:047D:2043.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK Kensington U+P Keyboard] on usb-0000:00:1f.4-2.3/input1
  1307. dracut: Starting plymouth daemon
  1308. dracut: rd_NO_DM: removing DM RAID activation
  1309. dracut: rd_NO_MD: removing MD RAID activation
  1310. ata_piix 0000:00:1f.1: version 2.13
  1311. ata_piix 0000:00:1f.1: setting latency timer to 64
  1312. scsi0 : ata_piix
  1313. scsi1 : ata_piix
  1314. ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  1315. ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  1316. ata1.00: ATA-5: WDC WD800BB-53CAA0, 16.06V16, max UDMA/100
  1317. ata1.00: 156301488 sectors, multi 16: LBA
  1318. ata1.00: configured for UDMA/100
  1319. scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-53CA 16.0 PQ: 0 ANSI: 5
  1320. ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8160B, 0014, max UDMA/66
  1321. ata2.01: ATAPI: LITE-ON LTR-24102B, 5GS4, max UDMA/33
  1322. ata2.00: limited to UDMA/33 due to 40-wire cable
  1323. ata2.00: configured for UDMA/33
  1324. ata2.01: configured for UDMA/33
  1325. scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8160B 0014 PQ: 0 ANSI: 5
  1326. scsi 1:0:1:0: CD-ROM LITE-ON LTR-24102B 5GS4 PQ: 0 ANSI: 5
  1327. sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
  1328. Uniform CD-ROM driver Revision: 3.20
  1329. sr 1:0:0:0: Attached scsi CD-ROM sr0
  1330. sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
  1331. sr 1:0:1:0: Attached scsi CD-ROM sr1
  1332. sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  1333. sd 0:0:0:0: [sda] Write Protect is off
  1334. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  1335. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1336. sda: sda1 sda2 sda3
  1337. sd 0:0:0:0: [sda] Attached SCSI disk
  1338. EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
  1339. dracut: Mounted root filesystem /dev/sda2
  1340. SELinux: Disabled at runtime.
  1341. SELinux: Unregistering netfilter hooks
  1342. type=1404 audit(1377385929.684:2): selinux=0 auid=4294967295 ses=4294967295
  1343. dracut:
  1344. dracut: Switching root
  1345. udev: starting version 147
  1346. intel_rng: Firmware space is locked read-only. If you can't or
  1347. intel_rng: don't want to disable this in firmware setup, and if
  1348. intel_rng: you are certain that your system has a functional
  1349. intel_rng: RNG, try using the 'no_fwh_detect' option.
  1350. iTCO_vendor_support: vendor-support=0
  1351. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
  1352. iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
  1353. alloc irq_desc for 17 on node -1
  1354. alloc kstat_irqs on node -1
  1355. i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  1356. microcode: CPU0 sig=0xf24, pf=0x4, revision=0x7
  1357. platform microcode: firmware: requesting intel-ucode/0f-02-04
  1358. Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  1359. microcode: CPU0 updated to revision 0x1e, date = 2003-06-05
  1360. sd 0:0:0:0: Attached scsi generic sg0 type 0
  1361. sr 1:0:0:0: Attached scsi generic sg1 type 5
  1362. sr 1:0:1:0: Attached scsi generic sg2 type 5
  1363. EMU10K1_Audigy 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  1364. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  1365. e100: Copyright(c) 1999-2006 Intel Corporation
  1366. alloc irq_desc for 20 on node -1
  1367. alloc kstat_irqs on node -1
  1368. e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
  1369. e100 0000:02:08.0: PME# disabled
  1370. e100 0000:02:08.0: eth0: addr 0xfeaff000, irq 20, MAC addr 00:03:47:f1:30:c5
  1371. parport_pc 00:09: reported by Plug and Play ACPI
  1372. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
  1373. ppdev: user-space parallel port driver
  1374. EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
  1375. Adding 785400k swap on /dev/sda3. Priority:-1 extents:1 across:785400k
  1376. dahdi: Version: 2.7.0
  1377. dahdi: Telephony Interface Registered on major 196
  1378. alloc irq_desc for 22 on node -1
  1379. alloc kstat_irqs on node -1
  1380. wctdm 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  1381. dahdi: Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!
  1382. Freshmaker version: 71
  1383. Freshmaker passed register test
  1384. Module 0: Installed -- AUTO FXO (FCC mode)
  1385. Module 1: Installed -- AUTO FXS/DPO
  1386. Module 2: Installed -- AUTO FXS/DPO
  1387. Module 3: Installed -- AUTO FXS/DPO
  1388. Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
  1389. dahdi_transcode: Loaded.
  1390. INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
  1391. INFO-xpp: FEATURE: with PROTOCOL_DEBUG
  1392. INFO-xpp: FEATURE: with sync_tick() from DAHDI
  1393. INFO-xpp_usb: revision Unknown
  1394. usbcore: registered new interface driver xpp_usb
  1395. NET: Registered protocol family 10
  1396. lo: Disabled Privacy Extensions
  1397. e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
  1398. ADDRCONF(NETDEV_UP): eth0: link is not ready
  1399. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1400. eth0: no IPv6 routers present
  1401. ioctl: Start OnHookTrans, card 1
  1402. ioctl: Start OnHookTrans, card 2
  1403. Bluetooth: Core ver 2.15
  1404. NET: Registered protocol family 31
  1405. Bluetooth: HCI device and connection manager initialized
  1406. Bluetooth: HCI socket layer initialized
  1407. ioctl: Start OnHookTrans, card 1
  1408. ioctl: Start OnHookTrans, card 2
  1409. ioctl: Start OnHookTrans, card 1
  1410. ioctl: Start OnHookTrans, card 2
  1411. ioctl: Start OnHookTrans, card 1
  1412. ioctl: Start OnHookTrans, card 2
  1413. [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
  1414. ioctl: Start OnHookTrans, card 2
  1415. ioctl: Start OnHookTrans, card 2
  1416. ioctl: Start OnHookTrans, card 2
  1417. ioctl: Start OnHookTrans, card 2
  1418. ioctl: Start OnHookTrans, card 1
  1419. ioctl: Start OnHookTrans, card 1
  1420. ioctl: Start OnHookTrans, card 1
  1421. ioctl: Start OnHookTrans, card 1
  1422. ioctl: Start OnHookTrans, card 1
  1423. ioctl: Start OnHookTrans, card 1
  1424. ioctl: Start OnHookTrans, card 1
  1425. ioctl: Start OnHookTrans, card 1
  1426. ioctl: Start OnHookTrans, card 1
  1427. ioctl: Start OnHookTrans, card 1
  1428. ioctl: Start OnHookTrans, card 1
  1429. ioctl: Start OnHookTrans, card 1
  1430. ioctl: Start OnHookTrans, card 2
  1431. ioctl: Start OnHookTrans, card 2
  1432. Power alarm on module 3, resetting!
  1433. ioctl: Start OnHookTrans, card 1
  1434. ioctl: Start OnHookTrans, card 2
  1435. ioctl: Start OnHookTrans, card 1
  1436. ioctl: Start OnHookTrans, card 2
  1437. ioctl: Start OnHookTrans, card 1
  1438. ioctl: Start OnHookTrans, card 2
  1439. ioctl: Start OnHookTrans, card 1
  1440. ioctl: Start OnHookTrans, card 2
  1441. ioctl: Start OnHookTrans, card 1
  1442. ioctl: Start OnHookTrans, card 2
  1443. ip_tables: (C) 2000-2006 Netfilter Core Team
  1444. ioctl: Start OnHookTrans, card 1
  1445. ioctl: Start OnHookTrans, card 2
  1446. ioctl: Start OnHookTrans, card 1
  1447. ioctl: Start OnHookTrans, card 1
  1448. ioctl: Start OnHookTrans, card 2
  1449. ioctl: Start OnHookTrans, card 1
  1450. ioctl: Start OnHookTrans, card 2
  1451. ioctl: Start OnHookTrans, card 1
  1452. ioctl: Start OnHookTrans, card 2
  1453. ioctl: Start OnHookTrans, card 1
  1454. ioctl: Start OnHookTrans, card 2
  1455. ioctl: Start OnHookTrans, card 1
  1456. ioctl: Start OnHookTrans, card 2
  1457. ioctl: Start OnHookTrans, card 1
  1458. ioctl: Start OnHookTrans, card 2
  1459. ioctl: Start OnHookTrans, card 2
  1460. ioctl: Start OnHookTrans, card 2
  1461. ioctl: Start OnHookTrans, card 2
  1462. usbcore: deregistering interface driver xpp_usb
  1463. dahdi_transcode: Unloaded.
  1464. dahdi: disable_span: span 1
  1465. Freed a Wildcard
  1466. dahdi: Telephony Interface Unloaded
  1467. dahdi: Version: 2.7.0
  1468. dahdi: Telephony Interface Registered on major 196
  1469. dahdi: Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!
  1470. Freshmaker version: 71
  1471. Freshmaker passed register test
  1472. Module 0: Installed -- AUTO FXO (FCC mode)
  1473. Module 1: Installed -- AUTO FXS/DPO
  1474. Module 2: Installed -- AUTO FXS/DPO
  1475. Module 3: Installed -- AUTO FXS/DPO
  1476. Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
  1477. dahdi_transcode: Loaded.
  1478. INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
  1479. INFO-xpp: FEATURE: with PROTOCOL_DEBUG
  1480. INFO-xpp: FEATURE: with sync_tick() from DAHDI
  1481. INFO-xpp_usb: revision Unknown
  1482. usbcore: registered new interface driver xpp_usb
  1483. ioctl: Start OnHookTrans, card 1
  1484. ioctl: Start OnHookTrans, card 2
  1485. ioctl: Start OnHookTrans, card 2
  1486. ioctl: Start OnHookTrans, card 2
  1487. ioctl: Start OnHookTrans, card 1
  1488. ioctl: Start OnHookTrans, card 2
  1489. ioctl: Start OnHookTrans, card 2
  1490. ********************************************************************
  1491. Virtualization Check
  1492. Virtualization does not appear to be present!
  1493. This may mean PIAF is installed on real hardware or the virtualization
  1494. technology is not recognized
  1495. ********************************************************************
  1496. ***********************************************************************
  1497. * Special thanks to blanchae in the PIAF forums for the inspiration to*
  1498. * add the DAHDI informatation. The cleartext script for DAHDI info is *
  1499. * in the PIAF forums! *
  1500. ***********************************************************************
  1501. ASTERISK CORE SHOW VERSION
  1502. ***********************************************************************
  1503. Asterisk 1.8.23.0 built by root @ pbx.local on a i686 running Linux on 2013-08-24 03:55:13 UTC
  1504. ***********************************************************************
  1505.  
  1506. ***********************************************************************
  1507. asterisk -rnx 'dahdi show status'
  1508. ***********************************************************************
  1509. Description Alarms IRQ bpviol CRC Fra Codi Options LBO
  1510. Wildcard TDM400P REV E/F Board 5 OK 0 0 0 CAS Unk 0 db (CSU)/0-133 feet (DSX-1)
  1511. ***********************************************************************
  1512.  
  1513. ***********************************************************************
  1514. Output from asterisk -rnx 'dahdi show channels'
  1515. ***********************************************************************
  1516. Chan Extension Context Language MOH Interpret Blocked State
  1517. pseudo default default In Service
  1518. 1 from-zaptel en default In Service
  1519. 2 from-internal en default In Service
  1520. 3 from-internal en default In Service
  1521. 4 from-analog en default In Service
  1522. ***********************************************************************
  1523.  
  1524. ***********************************************************************
  1525. MODINFO DAHDI
  1526. ***********************************************************************
  1527. filename: /lib/modules/2.6.32-358.6.2.el6.i686/dahdi/dahdi.ko
  1528. alias: dahdi_dummy
  1529. license: GPL v2
  1530. description: DAHDI Telephony Interface
  1531. author: Mark Spencer <markster@digium.com>
  1532. version: 2.7.0
  1533. srcversion: 9D108BEFC58DD088AFC08C8
  1534. depends: crc-ccitt
  1535. vermagic: 2.6.32-358.6.2.el6.i686 SMP mod_unload modversions 686
  1536. parm: initdir:charp
  1537. parm: debug:Sets debugging verbosity as a bitfield, to see general debugging set this to 1. To see RBS debugging set this to 32 (int)
  1538. parm: deftaps:int
  1539. parm: max_pseudo_channels:Maximum number of pseudo channels. (int)
  1540. parm: hwec_overrides_swec:When true, a hardware echo canceller is used instead of configured SWEC. (int)
  1541. parm: auto_assign_spans:If 1 spans will automatically have their children span and channel numbers assigned by the driver. If 0, user space will need to assign them via /sys/bus/dahdi_devices. (int)
  1542. ***********************************************************************
  1543.  
  1544. ***********************************************************************
  1545. DADHI_HARDWARE
  1546. ***********************************************************************
  1547. pci:0000:02:0a.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F
  1548. ***********************************************************************
  1549.  
  1550. ***********************************************************************
  1551. LSDAHDI
  1552. ***********************************************************************
  1553. ### Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
  1554. 1 FXO FXSKS (In use)
  1555. 2 FXS FXOKS (In use)
  1556. 3 FXS FXOKS (In use)
  1557. 4 FXS FXOKS (In use)
  1558. ***********************************************************************
  1559.  
  1560. ***********************************************************************
  1561. DAHDI_SCAN
  1562. ***********************************************************************
  1563. [1]
  1564. active=yes
  1565. alarms=OK
  1566. description=Wildcard TDM400P REV E/F Board 5
  1567. name=WCTDM/4
  1568. manufacturer=Digium
  1569. devicetype=Wildcard TDM400P REV E/F
  1570. location=PCI Bus 02 Slot 11
  1571. basechan=1
  1572. totchans=4
  1573. irq=0
  1574. type=analog
  1575. port=1,FXO
  1576. port=2,FXS
  1577. port=3,FXS
  1578. port=4,FXS
  1579. ***********************************************************************
  1580.  
  1581. ***********************************************************************
  1582. Output from /etc/dahdi/init.conf
  1583. ***********************************************************************
  1584. #
  1585. # Shell settings for Dahdi initialization scripts.
  1586. # This replaces the old/per-platform files (/etc/sysconfig/zaptel,
  1587. # /etc/defaults/zaptel)
  1588. #
  1589.  
  1590. # The maximal timeout (seconds) to wait for udevd to finish generating
  1591. # device nodes after the modules have loaded and before running dahdi_cfg.
  1592. #DAHDI_DEV_TIMEOUT=40
  1593.  
  1594. # A list of modules to unload when stopping.
  1595. # All of their dependencies will be unloaded as well.
  1596. #DAHDI_UNLOAD_MODULES="" # Disable module unloading
  1597. #DAHDI_UNLOAD_MODULES="dahdi echo" # If you use OSLEC
  1598.  
  1599. # Override settings for xpp_fxloader
  1600. #XPP_FIRMWARE_DIR=/usr/share/dahdi
  1601. #XPP_HOTPLUG_DISABLED=yes
  1602. #XPP_HOTPLUG_DAHDI=yes
  1603. ***********************************************************************
  1604.  
  1605. ***********************************************************************
  1606. Output from /etc/dahdi/modules
  1607. ***********************************************************************
  1608. # -------------------------------------------------------------------------------;
  1609. # Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
  1610. # this file must be done via the web gui. There are alternative files to make ;
  1611. # custom modifications, details at: http://freepbx.org/configuration_files ;
  1612. # -------------------------------------------------------------------------------;
  1613. #
  1614.  
  1615. # Digium TE220: PCI-Express dual-port T1/E1/J1
  1616. # Digium TE420: PCI-Express quad-port T1/E1/J1
  1617. wct4xxp
  1618.  
  1619. # Digium TE121: PCI-Express single-port T1/E1/J1
  1620. # Digium TE122: PCI single-port T1/E1/J1
  1621. wcte12xp
  1622.  
  1623. # Digium TE131: PCI-Express single-port T1/E1/J1
  1624. # Digium TE132: PCI single-port T1/E1/J1
  1625. wcte13xp
  1626.  
  1627. # Digium T100P: PCI single-port T1
  1628. # Digium E100P: PCI single-port E1
  1629. wct1xxp
  1630.  
  1631. # Digium TE110P: PCI single-port T1/E1/J1
  1632. wcte11xp
  1633.  
  1634. # Digium TDM800P/AEX800: up to 8 analog ports
  1635. # Digium TDM410P/AEX410: up to 4 analog ports
  1636. wctdm24xxp
  1637.  
  1638. # X100P - Single port FXO interface
  1639. # X101P - Single port FXO interface
  1640. wcfxo
  1641.  
  1642. # Digium TDM400P: up to 4 analog ports
  1643. wctdm
  1644.  
  1645. # Digium B410P: 4 NT/TE BRI ports
  1646. wcb4xxp
  1647.  
  1648. # Digium TC400B: G729 / G723 Transcoding Engine
  1649. wctc4xxp
  1650.  
  1651. # Xorcom Astribank Devices
  1652. xpp_usb
  1653.  
  1654. ***********************************************************************
  1655.  
  1656. ***********************************************************************
  1657. Output from /etc/dahdi/system.conf
  1658. ***********************************************************************
  1659. # -------------------------------------------------------------------------------;
  1660. # Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
  1661. # this file must be done via the web gui. There are alternative files to make ;
  1662. # custom modifications, details at: http://freepbx.org/configuration_files ;
  1663. # -------------------------------------------------------------------------------;
  1664. #
  1665. fxsks=1
  1666. fxoks=2-4
  1667. loadzone=us
  1668. defaultzone=us***********************************************************************
  1669.  
  1670. ***********************************************************************
  1671. Is the ZAP2DAHDICOMPAT switch turned on?
  1672. ***********************************************************************
  1673. ZAP2DAHDICOMPAT=TRUE
  1674. ***********************************************************************
  1675.  
  1676. ***********************************************************************
  1677. Output from /etc/asterisk/chan_dahdi.conf
  1678. ***********************************************************************
  1679. ;--------------------------------------------------------------------------------;
  1680. ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
  1681. ; this file must be done via the web gui. There are alternative files to make ;
  1682. ; custom modifications, details at: http://freepbx.org/configuration_files ;
  1683. ;--------------------------------------------------------------------------------;
  1684. ;
  1685.  
  1686. [general]
  1687.  
  1688. ; generated by module
  1689. #include chan_dahdi_general.conf
  1690.  
  1691. ; for user additions not provided by module
  1692. #include chan_dahdi_general_custom.conf
  1693.  
  1694. [channels]
  1695. language=en
  1696. busydetect=yes
  1697. busycount=10
  1698. usecallerid=yes
  1699. callwaiting=yes
  1700. usecallingpres=yes
  1701. threewaycalling=yes
  1702. transfer=yes
  1703. cancallforward=yes
  1704. callreturn=yes
  1705. echocancel=yes
  1706. echocancelwhenbridged=no
  1707. echotraining=no
  1708. immediate=no
  1709. faxdetect=no
  1710. rxgain=0.0
  1711. txgain=0.0
  1712. module_name=wctdm24xxp
  1713. opermode_checkbox=0
  1714. opermode=USA
  1715. alawoverride_checkbox=0
  1716. alawoverride=0
  1717. fxs_honor_mode_checkbox=0
  1718. fxs_honor_mode=0
  1719. boostringer_checkbox=1
  1720. boostringer=1
  1721. lowpower_checkbox=0
  1722. lowpower=0
  1723. fastringer_checkbox=0
  1724. fastringer=0
  1725. ringdetect_checkbox=0
  1726. ringdetect=0
  1727. mwi_checkbox=0
  1728. mwi=none
  1729. neon_voltage=
  1730. neon_offlimit=
  1731. echocan_nlp_type=0
  1732. echocan_nlp_threshold=
  1733. echocan_nlp_max_supp=
  1734. callwaitingcallerid=yes
  1735.  
  1736. ; for user additions not provided by module
  1737. #include chan_dahdi_channels_custom.conf
  1738.  
  1739. ; include dahdi groups defined by DAHDI module of FreePBX
  1740. #include chan_dahdi_groups.conf
  1741.  
  1742. ; include dahdi extensions defined in FreePBX
  1743. #include chan_dahdi_additional.conf
  1744. ***********************************************************************
  1745.  
  1746. ***********************************************************************
  1747. Output from /etc/asterisk/chan_dahdi_general.conf
  1748. ***********************************************************************
  1749. ;--------------------------------------------------------------------------------;
  1750. ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
  1751. ; this file must be done via the web gui. There are alternative files to make ;
  1752. ; custom modifications, details at: http://freepbx.org/configuration_files ;
  1753. ;--------------------------------------------------------------------------------;
  1754. ;
  1755.  
  1756. ***********************************************************************
  1757.  
  1758. ***********************************************************************
  1759. Output from /etc/asterisk/chan_dahdi_general_custom.conf
  1760. ***********************************************************************
  1761. ***********************************************************************
  1762.  
  1763. ***********************************************************************
  1764. Output from /etc/asterisk/chan_dahdi_channels.conf
  1765. ***********************************************************************
  1766. /etc/asterisk/chan_dahdi_channels.conf does not appear to exist!
  1767. ***********************************************************************
  1768.  
  1769. ***********************************************************************
  1770. Output from /etc/asterisk/chan_dahdi_channels_custom.conf
  1771. ***********************************************************************
  1772. ***********************************************************************
  1773.  
  1774. ***********************************************************************
  1775. Output from /etc/asterisk/chan_dahdi_additional.conf
  1776. ***********************************************************************
  1777. ;--------------------------------------------------------------------------------;
  1778. ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
  1779. ; this file must be done via the web gui. There are alternative files to make ;
  1780. ; custom modifications, details at: http://freepbx.org/configuration_files ;
  1781. ;--------------------------------------------------------------------------------;
  1782. ;
  1783.  
  1784. ;;;;;;[201]
  1785. signalling=fxo_ks
  1786. pickupgroup=
  1787. mailbox=201@default
  1788. immediate=no
  1789. echotraining=800
  1790. echocancelwhenbridged=no
  1791. echocancel=yes
  1792. context=from-internal
  1793. callprogress=no
  1794. callgroup=
  1795. callerid=Downstairz <201>
  1796. busydetect=no
  1797. busycount=7
  1798. accountcode=
  1799. channel=>2
  1800.  
  1801. ;;;;;;[202]
  1802. signalling=fxo_ks
  1803. pickupgroup=
  1804. mailbox=202@default
  1805. immediate=no
  1806. echotraining=800
  1807. echocancelwhenbridged=no
  1808. echocancel=yes
  1809. context=from-internal
  1810. callprogress=no
  1811. callgroup=
  1812. callerid=Tigger <202>
  1813. busydetect=no
  1814. busycount=7
  1815. accountcode=
  1816. channel=>3
  1817.  
  1818. ***********************************************************************
  1819.  
  1820. ***********************************************************************
  1821. Output from /etc/asterisk/chan_dahdi_groups.conf
  1822. ***********************************************************************
  1823. ;--------------------------------------------------------------------------------;
  1824. ; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
  1825. ; this file must be done via the web gui. There are alternative files to make ;
  1826. ; custom modifications, details at: http://freepbx.org/configuration_files ;
  1827. ;--------------------------------------------------------------------------------;
  1828. ;
  1829.  
  1830.  
  1831. signalling=fxs_ks
  1832. context=from-zaptel
  1833. group=0
  1834. channel=>1
  1835.  
  1836. signalling=fxo_ks
  1837. context=from-analog
  1838. group=0
  1839. channel=>2
  1840.  
  1841. signalling=fxo_ks
  1842. context=from-analog
  1843. group=0
  1844. channel=>3
  1845.  
  1846. signalling=fxo_ks
  1847. context=from-analog
  1848. group=0
  1849. channel=>4***********************************************************************
  1850.  
  1851. ***********************************************************************
  1852. Output from /etc/asterisk/chan_dahdi_trunks.conf
  1853. ***********************************************************************
  1854. /etc/asterisk/chan_dahdi_trunks.conf does not appear to exist!
  1855. ***********************************************************************
  1856.  
  1857. ***********************************************************************
  1858. Output from /etc/asterisk/dahdi-channels.conf
  1859. ***********************************************************************
  1860. ; Autogenerated by /usr/sbin/dahdi_genconf on Sat Aug 24 01:01:48 2013
  1861. ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
  1862. ; your manual changes will be LOST.
  1863. ; Dahdi Channels Configurations (chan_dahdi.conf)
  1864. ;
  1865. ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
  1866. ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
  1867. ;
  1868.  
  1869. ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
  1870. ;;; line="1 WCTDM/4/0 FXSKS"
  1871. signalling=fxs_ks
  1872. callerid=asreceived
  1873. group=0
  1874. context=from-zaptel
  1875. channel => 1
  1876. callerid=
  1877. group=
  1878. context=default
  1879.  
  1880. ;;; line="2 WCTDM/4/1 FXOKS"
  1881. signalling=fxo_ks
  1882. callerid="Channel 2" <4002>
  1883. mailbox=4002
  1884. group=5
  1885. context=from-internal
  1886. channel => 2
  1887. callerid=
  1888. mailbox=
  1889. group=
  1890. context=default
  1891.  
  1892. ;;; line="3 WCTDM/4/2 FXOKS"
  1893. signalling=fxo_ks
  1894. callerid="Channel 3" <4003>
  1895. mailbox=4003
  1896. group=5
  1897. context=from-internal
  1898. channel => 3
  1899. callerid=
  1900. mailbox=
  1901. group=
  1902. context=default
  1903.  
  1904. ;;; line="4 WCTDM/4/3 FXOKS"
  1905. signalling=fxo_ks
  1906. callerid="Channel 4" <4004>
  1907. mailbox=4004
  1908. group=5
  1909. context=from-internal
  1910. channel => 4
  1911. callerid=
  1912. mailbox=
  1913. group=
  1914. context=default
  1915.  
  1916.  
  1917. ***********************************************************************
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!