U-Boot SPL 2016.01-rc2-dirty (Jan 01 1970 - 00:00:00)
DRAM: 512 MiB
Trying to boot from


U-Boot 2016.01-rc2-dirty (Jan 01 1970 - 00:00:00 +0000) Allwinner Technology

CPU:   Allwinner H3 (SUN8I)
DRAM:  512 MiB
MMC:   SUNXI SD/MMC: 0
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0
(FEL boot)
## Executing script at 43100000
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux-3.4.39+
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    7045824 Bytes = 6.7 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
Using machid 0x1029 from environment

Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
        Start:  0x40000000
        Size:   512MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_common: ion reserve: [0x56000000, 0x60000000]!
[    2.605516] failed to get normal led pin assign
[    2.605528] failed to get standby led pin assign
[    2.608085] get config err!
[    2.608129] get config err!
[    3.169957] sunxikbd_init failed.
[    3.173764] ls_fetch_sysconfig_para: type err  device_used = 0.
[    3.180760] [RTC] WARNING: Rtc time will be wrong!!
[    3.186705] tscdev_init: tsc driver is disabled
[    3.193235] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[    3.208498] [ARISC ERROR] :message process error
[    3.213641] [ARISC ERROR] :message addr   : f004b840
[    3.219147] [ARISC ERROR] :message state  : 5
[    3.224009] [ARISC ERROR] :message attr   : 2
[    3.228841] [ARISC ERROR] :message type   : 30
[    3.233780] [ARISC ERROR] :message result : ff
[    3.238746] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
[    3.251237] [ARISC ERROR] :message process error
[    3.256358] [ARISC ERROR] :message addr   : f004b840
[    3.261877] [ARISC ERROR] :message state  : 5
[    3.266699] [ARISC ERROR] :message attr   : 2
[    3.271540] [ARISC ERROR] :message type   : 30
[    3.276467] [ARISC ERROR] :message result : ff
[    3.281416] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
[    3.295393] no blue_led, ignore it!
[    3.348145] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
[    3.355902] ths_fetch_sysconfig_para: type err  device_used = 1.
Starting logging: OK
Initializing random number generator... done.
Starting network...
This is a simple textured cube demo from the lima driver and
a memtester. Both combined in a single program. The mali400
hardware is only used to stress RAM in the background. But
this happens to significantly increase chances of exposing
memory stability related problems.

Kernel driver is version 14
Detected 1 Mali-400 GP Cores.
Detected 2 Mali-400 PP Cores.
FB: 1280x720@32bpp at 0x56200000 (0x00708000)
Using dual buffered direct rendering to FB.

memtester version 4.3.0 (32-bit)
Copyright (C) 2001-2012 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).

pagesize is 4096
pagesizemask is 0xfffff000
want 50MB (52428800 bytes)
got  50MB (52428800 bytes), trying mlock ...locked.
Loop 1/2:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : testing  35[   91.367675] [ARISC ERROR] :message process error
[   91.372855] [ARISC ERROR] :message addr   : f004b840
[   91.372865] [ARISC ERROR] :message state  : 5
[   91.372873] [ARISC ERROR] :message attr   : 2
[   91.372880] [ARISC ERROR] :message type   : 30
[   91.372887] [ARISC ERROR] :message result : ff
[   91.372910] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
testing  37[   91.878385] [ARISC ERROR] :message process error
[   91.888757] [ARISC ERROR] :message addr   : f004b840
[   91.894374] [ARISC ERROR] :message state  : 5
[   91.894385] [ARISC ERROR] :message attr   : 2
[   91.894393] [ARISC ERROR] :message type   : 30
[   91.894401] [ARISC ERROR] :message result : ff
[   91.894419] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
testing  41[   92.899046] [ARISC ERROR] :message process error
[   92.899067] [ARISC ERROR] :message addr   : f004b840
[   92.899075] [ARISC ERROR] :message state  : 5
[   92.899083] [ARISC ERROR] :message attr   : 2
[   92.899091] [ARISC ERROR] :message type   : 30
[   92.899099] [ARISC ERROR] :message result : ff
[   92.899118] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
setting  49[   94.900987] [ARISC ERROR] :message process error
[   94.906188] [ARISC ERROR] :message addr   : f004b840
[   94.906201] [ARISC ERROR] :message state  : 5
[   94.906209] [ARISC ERROR] :message attr   : 2
[   94.906217] [ARISC ERROR] :message type   : 30
[   94.906225] [ARISC ERROR] :message result : ff
[   94.906248] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
setting  51[   95.410713] [ARISC ERROR] :message process error
[   95.415928] [ARISC ERROR] :message addr   : f004b840
[   95.415942] [ARISC ERROR] :message state  : 5
[   95.415951] [ARISC ERROR] :message attr   : 2
[   95.415959] [ARISC ERROR] :message type   : 30
[   95.415966] [ARISC ERROR] :message result : ff
[   95.415988] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
ok
  Checkerboard        : ok
  Bit Spread          : setting  21[  171.420631] [ARISC ERROR] :message process error
[  171.425869] [ARISC ERROR] :message addr   : f004b840
[  171.425884] [ARISC ERROR] :message state  : 5
[  171.425893] [ARISC ERROR] :message attr   : 2
[  171.425904] [ARISC ERROR] :message type   : 30
[  171.425912] [ARISC ERROR] :message result : ff
[  171.425936] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
setting  27[  172.922153] [ARISC ERROR] :message process error
[  172.927380] [ARISC ERROR] :message addr   : f004b840
[  172.927394] [ARISC ERROR] :message state  : 5
[  172.927404] [ARISC ERROR] :message attr   : 2
[  172.927412] [ARISC ERROR] :message type   : 30
[  172.927421] [ARISC ERROR] :message result : ff
[  172.927445] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
testing  32[  174.419650] [ARISC ERROR] :message process error
setting  33[  174.424891] [ARISC ERROR] :message addr   : f004b840
[  174.424904] [ARISC ERROR] :message state  : 5
[  174.424912] [ARISC ERROR] :message attr   : 2
[  174.424920] [ARISC ERROR] :message type   : 30
[  174.424927] [ARISC ERROR] :message result : ff
[  174.424949] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
setting  56[  180.421733] [ARISC ERROR] :message process error
[  180.421760] [ARISC ERROR] :message addr   : f004b840
[  180.421771] [ARISC ERROR] :message state  : 5
[  180.421779] [ARISC ERROR] :message attr   : 2
[  180.421787] [ARISC ERROR] :message type   : 30
[  180.421795] [ARISC ERROR] :message result : ff
[  180.421817] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 2/2:
  Stuck Address       : setting   4[  233.920499] [ARISC ERROR] :message process error
[  233.925639] [ARISC ERROR] :message addr   : f004b840
[  233.925649] [ARISC ERROR] :message state  : 5
[  233.925657] [ARISC ERROR] :message attr   : 2
[  233.925664] [ARISC ERROR] :message type   : 30
[  233.925672] [ARISC ERROR] :message result : ff
[  233.925690] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : setting   4[  242.600178] INFO: task vsync proc 0:53 blocked for more than 120 seconds.
[  242.607773] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  242.607938] INFO: task vsync proc 1:54 blocked for more than 120 seconds.
[  242.607948] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
setting 163[  284.422666] [ARISC ERROR] :message process error
[  284.427840] [ARISC ERROR] :message addr   : f004b840
[  284.427852] [ARISC ERROR] :message state  : 5
[  284.427861] [ARISC ERROR] :message attr   : 2
[  284.427869] [ARISC ERROR] :message type   : 30
[  284.427878] [ARISC ERROR] :message result : ff
[  284.427898] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
setting 167[  285.421231] [ARISC ERROR] :message process error
[  285.426469] [ARISC ERROR] :message addr   : f004b840
[  285.426486] [ARISC ERROR] :message state  : 5
[  285.426494] [ARISC ERROR] :message attr   : 2
[  285.426502] [ARISC ERROR] :message type   : 30
[  285.426510] [ARISC ERROR] :message result : ff
[  285.426534] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
setting 169[  285.920870] [ARISC ERROR] :message process error
[  285.926027] [ARISC ERROR] :message addr   : f004b840
[  285.931700] [ARISC ERROR] :message state  : 5
[  285.931718] [ARISC ERROR] :message attr   : 2
[  285.931727] [ARISC ERROR] :message type   : 30
[  285.931735] [ARISC ERROR] :message result : ff
[  285.931769] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
testing 174[  287.419648] [ARISC ERROR] :message process error
[  287.424913] [ARISC ERROR] :message addr   : f004b840
[  287.424925] [ARISC ERROR] :message state  : 5
[  287.424933] [ARISC ERROR] :message attr   : 2
[  287.424940] [ARISC ERROR] :message type   : 30
[  287.424947] [ARISC ERROR] :message result : ff
setting 175[  287.424966] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
testing 176[  287.919502] [ARISC ERROR] :message process error
[  287.919516] [ARISC ERROR] :message addr   : f004b840
[  287.919525] [ARISC ERROR] :message state  : 5
[  287.919532] [ARISC ERROR] :message attr   : 2
[  287.919541] [ARISC ERROR] :message type   : 30
[  287.919549] [ARISC ERROR] :message result : ff
[  287.919568] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
setting 182[  289.421944] [ARISC ERROR] :message process error
[  289.427157] [ARISC ERROR] :message addr   : f004b840
[  289.427172] [ARISC ERROR] :message state  : 5
[  289.427180] [ARISC ERROR] :message attr   : 2
[  289.427189] [ARISC ERROR] :message type   : 30
[  289.427198] [ARISC ERROR] :message result : ff
[  289.427222] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
setting 184[  289.921856] [ARISC ERROR] :message process error
[  289.927050] [ARISC ERROR] :message addr   : f004b840
[  289.927062] [ARISC ERROR] :message state  : 5
[  289.927070] [ARISC ERROR] :message attr   : 2
[  289.927078] [ARISC ERROR] :message type   : 30
[  289.927086] [ARISC ERROR] :message result : ff
[  289.927119] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
setting 188[  290.921174] [ARISC ERROR] :message process error
[  290.921205] [ARISC ERROR] :message addr   : f004b840
[  290.921216] [ARISC ERROR] :message state  : 5
[  290.921223] [ARISC ERROR] :message attr   : 2
[  290.921231] [ARISC ERROR] :message type   : 30
[  290.921239] [ARISC ERROR] :message result : ff
[  290.921263] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
setting 190[  291.421437] [ARISC ERROR] :message process error
[  291.426638] [ARISC ERROR] :message addr   : f004b840
[  291.426650] [ARISC ERROR] :message state  : 5
[  291.426659] [ARISC ERROR] :message attr   : 2
[  291.426668] [ARISC ERROR] :message type   : 30
[  291.426675] [ARISC ERROR] :message result : ff
[  291.426696] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
setting 192[  291.921041] [ARISC ERROR] :message process error
[  291.926218] [ARISC ERROR] :message addr   : f004b840
[  291.926230] [ARISC ERROR] :message state  : 5
[  291.926239] [ARISC ERROR] :message attr   : 2
[  291.926246] [ARISC ERROR] :message type   : 30
[  291.926254] [ARISC ERROR] :message result : ff
[  291.926273] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
setting 194[  292.421705] [ARISC ERROR] :message process error
[  292.421730] [ARISC ERROR] :message addr   : f004b840
[  292.421740] [ARISC ERROR] :message state  : 5
[  292.421748] [ARISC ERROR] :message attr   : 2
[  292.421757] [ARISC ERROR] :message type   : 30
[  292.421765] [ARISC ERROR] :message result : ff
[  292.421786] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
setting 205[  295.421945] [ARISC ERROR] :message process error
[  295.427142] [ARISC ERROR] :message addr   : f004b840
[  295.427155] [ARISC ERROR] :message state  : 5
[  295.427164] [ARISC ERROR] :message attr   : 2
[  295.427171] [ARISC ERROR] :message type   : 30
[  295.427179] [ARISC ERROR] :message result : ff
[  295.427201] [cpu_freq] ERR:set cpu frequency to 816MHz failed!
setting 207[  295.921708] [ARISC ERROR] :message process error
[  295.926888] [ARISC ERROR] :message addr   : f004b840
[  295.926901] [ARISC ERROR] :message state  : 5
[  295.926909] [ARISC ERROR] :message attr   : 2
[  295.926917] [ARISC ERROR] :message type   : 30
[  295.926925] [ARISC ERROR] :message result : ff
[  295.926945] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
ok
  Block Sequential    : setting 205[  362.600218] INFO: task vsync proc 0:53 blocked for more than 120 seconds.
[  362.607813] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  362.607981] INFO: task vsync proc 1:54 blocked for more than 120 seconds.
[  362.607991] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ok
  Checkerboard        : testing  20[  381.418805] [ARISC ERROR] :message process error
[  381.424073] [ARISC ERROR] :message addr   : f004b840
setting  21[  381.429659] [ARISC ERROR] :message state  : 5
[  381.429670] [ARISC ERROR] :message attr   : 2
[  381.429678] [ARISC ERROR] :message type   : 30
[  381.429685] [ARISC ERROR] :message result : ff
[  381.429850] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
[  381.437526] [ARISC ERROR] :message process error
[  381.437550] [ARISC ERROR] :message addr   : f004b840
[  381.437559] [ARISC ERROR] :message state  : 5
[  381.437566] [ARISC ERROR] :message attr   : 2
[  381.437574] [ARISC ERROR] :message type   : 30
[  381.437582] [ARISC ERROR] :message result : ff
[  381.437600] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
[  381.508760] [ARISC ERROR] :message process error
[  381.514060] [ARISC ERROR] :message addr   : f004b840
[  381.519584] [ARISC ERROR] :message state  : 5
[  381.524635] [ARISC ERROR] :message attr   : 2
[  381.529483] [ARISC ERROR] :message type   : 30
[  381.534575] [ARISC ERROR] :message result : ff
[  381.539843] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
[  381.556404] [ARISC ERROR] :message process error
testing  21[  381.561711] [ARISC ERROR] :message addr   : f004b840
[  381.569094] [ARISC ERROR] :message state  : 5
[  381.569104] [ARISC ERROR] :message attr   : 2
[  381.569112] [ARISC ERROR] :message type   : 30
[  381.569119] [ARISC ERROR] :message result : ff
[  381.569147] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
[  381.606095] [ARISC ERROR] :message process error
[  381.611318] [ARISC ERROR] :message addr   : f004b840
[  381.616836] [ARISC ERROR] :message state  : 5
[  381.621729] [ARISC ERROR] :message attr   : 2
[  381.626569] [ARISC ERROR] :message type   : 30
[  381.631625] [ARISC ERROR] :message result : ff
[  381.637986] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
setting  22[  381.658713] [ARISC ERROR] :message process error
[  381.663997] [ARISC ERROR] :message addr   : f004b840
[  381.669521] [ARISC ERROR] :message state  : 5
[  381.674456] [ARISC ERROR] :message attr   : 2
[  381.679302] [ARISC ERROR] :message type   : 30
[  381.689323] [ARISC ERROR] :message result : ff
[  381.694955] [cpu_freq] ERR:set cpu frequency to 648MHz failed!
[  381.713831] [ARISC ERROR] :message process error
[  381.718958] [ARISC ERROR] :message addr   : f004b840
[  381.724482] [ARISC ERROR] :message state  : 5
[  381.729313] [ARISC ERROR] :message attr   : 2
[  381.734162] [ARISC ERROR] :message type   : 30
[  381.739089] [ARISC ERROR] :message result : ff
[  381.744096] [cpu_freq] ERR:set cpu frequency to 480MHz failed!
ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : setting  47[  482.600156] INFO: task vsync proc 0:53 blocked for more than 120 seconds.
testing  47[  482.610568] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  482.634289] INFO: task vsync proc 1:54 blocked for more than 120 seconds.
[  482.650835] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ok

Done.
This is a simple textured cube demo from the lima driver and
a memtester. Both combined in a single program. The mali400
hardware is only used to stress RAM in the background. But
this happens to significantly increase chances of exposing
memory stability related problems.

Kernel driver is version 14
Detected 1 Mali-400 GP Cores.
Detected 2 Mali-400 PP Cores.
FB: 1280x720@32bpp at 0x56200000 (0x00708000)
Using dual buffered direct rendering to FB.

memtester version 4.3.0 (32-bit)
Copyright (C) 2001-2012 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).

pagesize is 4096
pagesizemask is 0xfffff000
want 50MB (52428800 bytes)
got  50MB (52428800 bytes), trying mlock ...locked.
Loop 1/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : setting  28[  602.670154] INFO: task vsync proc 0:53 blocked for more than 120 seconds.
[  602.683118] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  602.700418] INFO: task vsync proc 1:54 blocked for more than 120 seconds.
[  602.722332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ok
  Checkerboard        : ok
  Bit Spread          : setting  41[  722.740349] INFO: task vsync proc 0:53 blocked for more than 120 seconds.
[  722.753548] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  722.771012] INFO: task vsync proc 1:54 blocked for more than 120 seconds.
[  722.795318] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 2/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 3/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 4/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 5/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 6/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 7/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 8/8:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : ok
  Block Sequential    : ok
  Checkerboard        : ok
  Bit Spread          : ok
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Done.
This is a simple textured cube demo from the lima driver and
a memtester. Both combined in a single program. The mali400
hardware is only used to stress RAM in the background. But
this happens to significantly increase chances of exposing
memory stability related problems.

Kernel driver is version 14
Detected 1 Mali-400 GP Cores.
Detected 2 Mali-400 PP Cores.
FB: 1280x720@32bpp at 0x56200000 (0x00708000)
Using dual buffered direct rendering to FB.

memtester version 4.3.0 (32-bit)
Copyright (C) 2001-2012 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).

pagesize is 4096
pagesizemask is 0xfffff000
want 50MB (52428800 bytes)
got  50MB (52428800 bytes), trying mlock ...locked.
Loop 1:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok                                       +-----------------------------------+
  Bit Flip            : ok                                       |                                   |
  Block Sequential    : ok                                       |  Cannot open /dev/cu.usbserial!   |
  Checkerboard        : ok                                       |                                   |
  Bit Spread          : ok                                       +-----------------------------------+
  Solid Bits          : ok
  Walking Ones        : ok
  Walking Zeroes      : ok

Loop 2:
  Stuck Address       : ok
  Random Value        : ok
  Compare XOR         : ok
  Compare SUB         : ok
  Compare MUL         : ok
  Compare DIV         : ok
  Compare OR          : ok
  Compare AND         : ok
  Sequential Increment: ok
  Bit Flip            : setting 241