Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.498890] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.499965] brd: module loaded
- [ 0.500357] loop: module loaded
- [ 0.500433] input: Macintosh mouse button emulation as /devices/virtual/input/input3
- [ 0.500757] Fixed MDIO Bus: probed
- [ 0.500786] PPP generic driver version 2.4.2
- [ 0.500810] tun: Universal TUN/TAP device driver, 1.6
- [ 0.500812] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.500884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.500907] alloc irq_desc for 19 on node -1
- [ 0.500909] alloc kstat_irqs on node -1
- [ 0.500915] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
- [ 0.500929] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.500932] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.500960] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.500995] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.504874] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.504888] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4a04800
- [ 0.520013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.520080] usb usb1: configuration #1 chosen from 1 choice
- [ 0.520106] hub 1-0:1.0: USB hub found
- [ 0.520113] hub 1-0:1.0: 6 ports detected
- [ 0.520164] alloc irq_desc for 23 on node -1
- [ 0.520165] alloc kstat_irqs on node -1
- [ 0.520169] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.520178] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.520181] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.520204] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.520231] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.524099] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.524110] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4a04c00
- [ 0.540017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.540081] usb usb2: configuration #1 chosen from 1 choice
- [ 0.540100] hub 2-0:1.0: USB hub found
- [ 0.540106] hub 2-0:1.0: 6 ports detected
- [ 0.540154] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.540165] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.540180] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.540186] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.540189] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.540212] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.540244] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
- [ 0.540314] usb usb3: configuration #1 chosen from 1 choice
- [ 0.540333] hub 3-0:1.0: USB hub found
- [ 0.540339] hub 3-0:1.0: 2 ports detected
- [ 0.540379] alloc irq_desc for 21 on node -1
- [ 0.540380] alloc kstat_irqs on node -1
- [ 0.540384] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.540389] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.540392] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.540420] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.540451] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
- [ 0.540522] usb usb4: configuration #1 chosen from 1 choice
- [ 0.540542] hub 4-0:1.0: USB hub found
- [ 0.540547] hub 4-0:1.0: 2 ports detected
- [ 0.540587] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
- [ 0.540592] uhci_hcd 0000:00:1a.2: setting latency timer to 64
- [ 0.540595] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.540620] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.540644] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
- [ 0.540713] usb usb5: configuration #1 chosen from 1 choice
- [ 0.540733] hub 5-0:1.0: USB hub found
- [ 0.540738] hub 5-0:1.0: 2 ports detected
- [ 0.540777] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.540782] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.540785] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.540816] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.540840] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
- [ 0.540909] usb usb6: configuration #1 chosen from 1 choice
- [ 0.540928] hub 6-0:1.0: USB hub found
- [ 0.540933] hub 6-0:1.0: 2 ports detected
- [ 0.540969] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.540975] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.540978] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.541003] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.541027] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
- [ 0.541095] usb usb7: configuration #1 chosen from 1 choice
- [ 0.541118] hub 7-0:1.0: USB hub found
- [ 0.541123] hub 7-0:1.0: 2 ports detected
- [ 0.541160] alloc irq_desc for 18 on node -1
- [ 0.541161] alloc kstat_irqs on node -1
- [ 0.541165] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.541170] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.541173] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.541205] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.541235] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
- [ 0.541305] usb usb8: configuration #1 chosen from 1 choice
- [ 0.541327] hub 8-0:1.0: USB hub found
- [ 0.541333] hub 8-0:1.0: 2 ports detected
- [ 0.541400] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2A] at 0x60,0x64 irq 1,12
- [ 0.544810] i8042.c: Detected active multiplexing controller, rev 1.1.
- [ 0.546131] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.546136] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.546157] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.546174] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.546197] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.546281] mice: PS/2 mouse device common for all mice
- [ 0.546393] rtc_cmos 00:05: RTC can wake from S4
- [ 0.546420] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.546447] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.546536] device-mapper: uevent: version 1.0.3
- [ 0.546615] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 0.546677] device-mapper: multipath: version 1.1.0 loaded
- [ 0.546680] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 0.546869] cpuidle: using governor ladder
- [ 0.546954] cpuidle: using governor menu
- [ 0.547217] TCP cubic registered
- [ 0.547315] NET: Registered protocol family 10
- [ 0.547667] lo: Disabled Privacy Extensions
- [ 0.547890] NET: Registered protocol family 17
- [ 0.548538] PM: Resume from disk failed.
- [ 0.548547] registered taskstats version 1
- [ 0.548994] Magic number: 10:160:495
- [ 0.549075] rtc_cmos 00:05: setting system clock to 2010-05-03 19:27:10 UTC (1272914830)
- [ 0.549077] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.549079] EDD information not available.
- [ 0.549140] Freeing unused kernel memory: 876k freed
- [ 0.549456] Write protecting the kernel read-only data: 7680k
- [ 0.561763] udev: starting version 151
- [ 0.589596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 0.597493] ahci 0000:00:1f.2: version 3.0
- [ 0.597513] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.597563] alloc irq_desc for 27 on node -1
- [ 0.597565] alloc kstat_irqs on node -1
- [ 0.597576] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
- [ 0.597666] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
- [ 0.597669] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ccc ems sxs
- [ 0.597674] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.638760] sky2 driver version 1.25
- [ 0.638797] sky2 0000:07:00.0: enabling device (0000 -> 0003)
- [ 0.638806] sky2 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.638821] sky2 0000:07:00.0: setting latency timer to 64
- [ 0.638855] sky2 0000:07:00.0: Yukon-2 Extreme chip revision 2
- [ 0.638942] alloc irq_desc for 28 on node -1
- [ 0.638944] alloc kstat_irqs on node -1
- [ 0.638959] sky2 0000:07:00.0: irq 28 for MSI/MSI-X
- [ 0.639556] sky2 eth0: addr 00:23:8b:2b:35:f8
- [ 0.649120] ohci1394 0000:0a:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.652592] scsi0 : ahci
- [ 0.652788] scsi1 : ahci
- [ 0.652862] scsi2 : ahci
- [ 0.652937] scsi3 : ahci
- [ 0.653023] scsi4 : ahci
- [ 0.653108] scsi5 : ahci
- [ 0.653248] ata1: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04100 irq 27
- [ 0.653257] ata2: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04180 irq 27
- [ 0.653259] ata3: DUMMY
- [ 0.653260] ata4: DUMMY
- [ 0.653262] ata5: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04300 irq 27
- [ 0.653265] ata6: SATA max UDMA/133 abar m2048@0xf4a04000 port 0xf4a04380 irq 27
- [ 0.703601] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ff501000-ff5017ff] Max Packet=[2048] IR/IT contexts=[8/8]
- [ 1.000110] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.000137] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.000156] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.000179] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.000798] ACPI Warning for \_SB_.PCI0.SAT0.PRT0._GTF: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
- [ 1.000808] ata1.00: _GTF unexpected object type 0x1
- [ 1.001893] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.50, max UDMA/33
- [ 1.004160] ata2.00: configured for UDMA/33
- [ 1.020104] hub 2-0:1.0: unable to enumerate USB device on port 3
- [ 1.084989] ata1.00: ATA-8: TOSHIBA MK3252GSX, LV010M, max UDMA/100
- [ 1.084992] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.086015] ata1.00: _GTF unexpected object type 0x1
- [ 1.086388] ata1.00: configured for UDMA/100
- [ 1.086517] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3252GS LV01 PQ: 0 ANSI: 5
- [ 1.086669] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.086701] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 1.086759] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.086762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.086780] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.086891] sda:
- [ 1.088675] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.50 PQ: 0 ANSI: 5
- [ 1.092629] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.092632] Uniform CD-ROM driver Revision: 3.20
- [ 1.092737] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 1.092785] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 1.135417] sda2 < sda5 sda6
- [ 1.140051] usb 2-4: new high speed USB device using ehci_hcd and address 4
- [ 1.155306] sda7 >
- [ 1.155602] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.334684] usb 2-4: configuration #1 chosen from 1 choice
- [ 1.577011] EXT4-fs (sda7): mounted filesystem with ordered data mode
- [ 1.620067] usb 3-2: new low speed USB device using uhci_hcd and address 2
- [ 1.809414] usb 3-2: configuration #1 chosen from 1 choice
- [ 2.020152] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b2400014475ec]
- [ 2.090121] usb 6-2: new full speed USB device using uhci_hcd and address 2
- [ 2.262002] usb 6-2: configuration #1 chosen from 1 choice
- [ 10.867539] udev: starting version 151
- [ 10.977433] Adding 1000440k swap on /dev/sda6. Priority:-1 extents:1 across:1000440k
- [ 11.004218] lp: driver loaded but no devices found
- [ 11.085910] omnibook: Driver version 2.20090707-trunk.
- [ 11.085912] omnibook: Forced load with EC type 14.
- [ 11.086302] input: Omnibook ACPI scancode generator as /devices/virtual/input/input5
- [ 11.112388] omnibook: Enabled features: bluetooth dmi version lcd.
- [ 11.264763] sdhci: Secure Digital Host Controller Interface driver
- [ 11.264766] sdhci: Copyright(c) Pierre Ossman
- [ 11.265750] sdhci-pci 0000:0a:01.2: SDHCI controller found [1217:7120] (rev 2)
- [ 11.265769] sdhci-pci 0000:0a:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 11.265809] mmc0: Unknown controller version (2). You may experience problems.
- [ 11.265890] Registered led device: mmc0::
- [ 11.265923] mmc0: SDHCI controller on PCI [0000:0a:01.2] using DMA
- [ 11.342024] usbcore: registered new interface driver hiddev
- [ 11.356107] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input6
- [ 11.356192] generic-usb 0003:046D:C019.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-2/input0
- [ 11.356217] usbcore: registered new interface driver usbhid
- [ 11.356219] usbhid: v2.6:USB HID core driver
- [ 11.376820] cfg80211: Calling CRDA to update world regulatory domain
- [ 11.381000] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
- [ 11.382641] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
- [ 11.390813] type=1505 audit(1272914841.333:2): operation="profile_load" pid=704 name="/sbin/dhclient3"
- [ 11.391339] type=1505 audit(1272914841.333:3): operation="profile_load" pid=704 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 11.391623] type=1505 audit(1272914841.333:4): operation="profile_load" pid=704 name="/usr/lib/connman/scripts/dhclient-script"
- [ 11.403459] cfg80211: World regulatory domain updated:
- [ 11.403462] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 11.403465] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 11.403467] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 11.403469] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 11.403471] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 11.403473] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 11.405274] [drm] Initialized drm 1.1.0 20060810
- [ 11.406472] Linux video capture interface: v2.00
- [ 11.408725] uvcvideo: Found UVC 1.00 device CNA7137 (04f2:b064)
- [ 11.422303] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 11.431494] input: CNA7137 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
- [ 11.431542] usbcore: registered new interface driver uvcvideo
- [ 11.431545] USB Video Class driver (v0.1.0)
- [ 11.444434] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 11.444439] i915 0000:00:02.0: setting latency timer to 64
- [ 11.462875] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
- [ 11.462878] [drm] MTRR allocation failed. Graphics performance may suffer.
- [ 11.462922] alloc irq_desc for 29 on node -1
- [ 11.462924] alloc kstat_irqs on node -1
- [ 11.462931] i915 0000:00:02.0: irq 29 for MSI/MSI-X
- [ 11.462936] [drm] set up 127M of stolen space
- [ 11.465896] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
- [ 11.465898] iwlagn: Copyright(c) 2003-2009 Intel Corporation
- [ 11.465962] iwlagn 0000:08:00.0: enabling device (0000 -> 0002)
- [ 11.465971] iwlagn 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 11.465982] iwlagn 0000:08:00.0: setting latency timer to 64
- [ 11.466012] iwlagn 0000:08:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
- [ 11.509853] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
- [ 11.509914] alloc irq_desc for 30 on node -1
- [ 11.509915] alloc kstat_irqs on node -1
- [ 11.509933] iwlagn 0000:08:00.0: irq 30 for MSI/MSI-X
- [ 11.535161] phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 11.559797] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 11.630052] usb 7-1: new full speed USB device using uhci_hcd and address 2
- [ 11.746828] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
- [ 11.763717] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
- [ 11.815169] usb 7-1: configuration #1 chosen from 1 choice
- [ 12.343911] fb0: inteldrmfb frame buffer device
- [ 12.343913] registered panic notifier
- [ 12.360246] acpi device:03: registered as cooling_device2
- [ 12.360729] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
- [ 12.360806] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 12.360852] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 12.360893] alloc irq_desc for 22 on node -1
- [ 12.360895] alloc kstat_irqs on node -1
- [ 12.360900] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 12.360929] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 12.363303] vga16fb: initializing
- [ 12.363306] vga16fb: mapped to 0xffff8800000a0000
- [ 12.363309] vga16fb: not registering due to another framebuffer present
- [ 12.489043] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- [ 12.489192] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 12.489281] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 12.536281] Bluetooth: Core ver 2.15
- [ 12.536325] NET: Registered protocol family 31
- [ 12.536326] Bluetooth: HCI device and connection manager initialized
- [ 12.536328] Bluetooth: HCI socket layer initialized
- [ 12.611169] Console: switching to colour frame buffer device 106x30
- [ 12.630656] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 12.630853] usbcore: registered new interface driver btusb
- [ 13.639324] type=1505 audit(1272914843.581:5): operation="profile_load" pid=907 name="/usr/share/gdm/guest-session/Xsession"
- [ 13.640569] type=1505 audit(1272914843.590:6): operation="profile_replace" pid=908 name="/sbin/dhclient3"
- [ 13.641077] type=1505 audit(1272914843.590:7): operation="profile_replace" pid=908 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
- [ 13.641350] type=1505 audit(1272914843.590:8): operation="profile_replace" pid=908 name="/usr/lib/connman/scripts/dhclient-script"
- [ 13.643522] type=1505 audit(1272914843.590:9): operation="profile_load" pid=909 name="/usr/bin/evince"
- [ 13.649909] type=1505 audit(1272914843.590:10): operation="profile_load" pid=909 name="/usr/bin/evince-previewer"
- [ 13.654067] type=1505 audit(1272914843.600:11): operation="profile_load" pid=909 name="/usr/bin/evince-thumbnailer"
- [ 13.824982] sky2 eth0: enabling interface
- [ 13.825408] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 13.826396] iwlagn 0000:08:00.0: firmware: requesting iwlwifi-5000-2.ucode
- [ 13.844027] iwlagn 0000:08:00.0: loaded firmware version 8.24.2.12
- [ 13.997184] Registered led device: iwl-phy0::radio
- [ 13.997372] Registered led device: iwl-phy0::assoc
- [ 13.997559] Registered led device: iwl-phy0::RX
- [ 13.997749] Registered led device: iwl-phy0::TX
- [ 14.113577] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 14.435087] ppdev: user-space parallel port driver
- [ 14.500983] Bluetooth: L2CAP ver 2.14
- [ 14.500985] Bluetooth: L2CAP socket layer initialized
- [ 14.579968] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 14.579970] Bluetooth: BNEP filters: protocol multicast
- [ 14.608867] Bridge firewalling registered
- [ 14.678085] Bluetooth: SCO (Voice Link) ver 0.6
- [ 14.678087] Bluetooth: SCO socket layer initialized
- [ 14.884785] Bluetooth: RFCOMM TTY layer initialized
- [ 14.884789] Bluetooth: RFCOMM socket layer initialized
- [ 14.884790] Bluetooth: RFCOMM ver 1.11
- [ 45.387955] wlan0: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [ 45.388010] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 45.419262] wlan0: direct probe responded
- [ 45.419267] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 45.612729] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 2)
- [ 45.810064] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 3)
- [ 45.812349] wlan0: authenticated
- [ 45.812369] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 45.838204] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 45.838208] wlan0: associated
- [ 45.840296] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 55.880070] wlan0: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [ 55.920729] wlan0: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [ 55.938960] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 56.120055] wlan0: no IPv6 routers present
- [ 56.132729] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 2)
- [ 56.330162] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 3)
- [ 56.530162] wlan0: direct probe to AP 00:27:19:e3:51:26 timed out
- [ 77.191474] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 77.206593] wlan0: direct probe responded
- [ 77.206604] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 77.400578] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 2)
- [ 77.403076] wlan0: authenticated
- [ 77.403133] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 77.415207] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 77.415217] wlan0: associated
- [ 78.534645] Intel AES-NI instructions are not detected.
- [ 78.563872] padlock: VIA PadLock not detected.
- [ 156.400133] No probe response from AP 00:27:19:e3:51:26 after 500ms, disconnecting.
- [ 159.784793] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 159.789882] wlan0: direct probe responded
- [ 159.789891] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 159.792224] wlan0: authenticated
- [ 159.792265] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 159.795213] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=10 aid=7067)
- [ 159.795221] wlan0: AP denied association (code=10)
- [ 159.795248] wlan0: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [ 172.960272] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 173.162537] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 2)
- [ 173.167776] wlan0: direct probe responded
- [ 173.167780] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 173.170076] wlan0: authenticated
- [ 173.170095] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 173.173889] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 173.173893] wlan0: associated
- [ 1427.540296] No probe response from AP 00:27:19:e3:51:26 after 500ms, disconnecting.
- [ 1430.849116] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 1430.854245] wlan0: direct probe responded
- [ 1430.854255] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 1430.856636] wlan0: authenticated
- [ 1430.856681] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 1430.860641] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 1430.860647] wlan0: associated
- [ 2294.480066] No probe response from AP 00:27:19:e3:51:26 after 500ms, disconnecting.
- [ 2297.881600] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 2297.890424] wlan0: direct probe responded
- [ 2297.890433] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 2297.896847] wlan0: authenticated
- [ 2297.896893] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 2297.900861] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 2297.900869] wlan0: associated
- [ 2776.581424] No probe response from AP 00:27:19:e3:51:26 after 500ms, disconnecting.
- [ 2779.996065] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 2780.001141] wlan0: direct probe responded
- [ 2780.001152] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 2780.008880] wlan0: authenticated
- [ 2780.008927] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 2780.200070] wlan0: associate with AP 00:27:19:e3:51:26 (try 2)
- [ 2780.211365] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 2780.211375] wlan0: associated
- [ 2780.231622] wlan0: deauthenticated from 00:27:19:e3:51:26 (Reason: 9)
- [ 2780.392201] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 2780.397459] wlan0: direct probe responded
- [ 2780.397467] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 2780.404184] wlan0: authenticated
- [ 2780.404233] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 2780.410155] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 2780.410162] wlan0: associated
- [ 3510.306330] iwlagn 0000:08:00.0: iwl_tx_agg_start on ra = 00:27:19:e3:51:26 tid = 0
- [ 3712.752733] wlan0: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [ 3719.594719] wlan0: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [ 3719.633285] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 3719.638403] wlan0: direct probe responded
- [ 3719.638411] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 3719.640748] wlan0: authenticated
- [ 3719.640793] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 3719.644604] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 3719.644611] wlan0: associated
- [ 4373.458833] iwlagn 0000:08:00.0: iwl_tx_agg_start on ra = 00:27:19:e3:51:26 tid = 0
- [ 8033.544059] No probe response from AP 00:27:19:e3:51:26 after 500ms, disconnecting.
- [ 8045.193030] wlan0: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [ 8045.198094] wlan0: direct probe responded
- [ 8045.198102] wlan0: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [ 8045.200406] wlan0: authenticated
- [ 8045.200446] wlan0: associate with AP 00:27:19:e3:51:26 (try 1)
- [ 8045.204262] wlan0: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=0 aid=1)
- [ 8045.204270] wlan0: associated
- [ 8404.206388] iwlagn 0000:08:00.0: iwl_tx_agg_start on ra = 00:27:19:e3:51:26 tid = 0
- [13056.480102] usb 2-1: new high speed USB device using ehci_hcd and address 6
- [13056.679501] usb 2-1: configuration #1 chosen from 1 choice
- [13056.840154] usb 2-1: reset high speed USB device using ehci_hcd and address 6
- [13058.030089] usb 2-1: firmware: requesting ar9170.fw
- [13058.379879] ath: EEPROM regdomain: 0x809c
- [13058.379886] ath: EEPROM indicates we should expect a country code
- [13058.379891] ath: doing EEPROM country->regdmn map search
- [13058.379896] ath: country maps to regdmn code: 0x52
- [13058.379901] ath: Country alpha2 being used: CN
- [13058.379906] ath: Regpair used: 0x52
- [13058.381561] phy1: Selected rate control algorithm 'minstrel'
- [13058.383564] cfg80211: Calling CRDA for country: CN
- [13058.384012] Registered led device: ar9170-phy1::tx
- [13058.384118] Registered led device: ar9170-phy1::assoc
- [13058.384125] usb 2-1: Atheros AR9170 is registered as 'phy1'
- [13058.384178] usbcore: registered new interface driver ar9170usb
- [13058.391976] cfg80211: Regulatory domain changed to country: CN
- [13058.391982] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [13058.391990] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [13058.391996] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
- [13059.615411] ADDRCONF(NETDEV_UP): wlan1: link is not ready
- [13067.583961] wlan1: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- [13067.584651] wlan1: direct probe to AP 00:27:19:e3:51:26 (try 1)
- [13067.589777] wlan1: direct probe responded
- [13067.589785] wlan1: authenticate with AP 00:27:19:e3:51:26 (try 1)
- [13067.592630] wlan1: authenticated
- [13067.592667] wlan1: associate with AP 00:27:19:e3:51:26 (try 1)
- [13067.595884] wlan1: RX AssocResp from 00:27:19:e3:51:26 (capab=0x431 status=10 aid=3178)
- [13067.595892] wlan1: AP denied association (code=10)
- [13067.595918] wlan1: deauthenticating from 00:27:19:e3:51:26 by local choice (reason=3)
- sergi@sergi-laptop:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement