booting linux 3.6.7 on Beagle-xM

Booting kernel from Legacy Image at 84000000 ...
   Image Name:   Linux-3.6.7
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2892296 Bytes = 2.8 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Initializing cgroup subsys cpu
Linux version 3.6.7 (root@OpenSuseDevMachine) (gcc version 4.6.3 (Buildroot 2012.08) ) #57 PREEMPT Mon Dec 3 17:53:18 CET 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: OMAP3 Beagle Board
Reserving 12582912 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
OMAP3630 ES1.1 (l2cache iva sgx neon isp 192mhz_clk )
Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126720
Kernel command line: console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootwait
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 499MB = 499MB total
Memory: 500088k/500088k available, 24200k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc053b38c   (5325 kB)
      .init : 0xc053c000 - 0xc05718b4   ( 215 kB)
      .data : 0xc0572000 - 0xc05e7d58   ( 472 kB)
       .bss : 0xc05e7d7c - 0xc0632a80   ( 300 kB)
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER1 at 13000000 Hz
sched_clock: 32 bits at 13MHz, resolution 76ns, wraps every 330382ms
OMAP clocksource: GPTIMER2 at 13000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x803c0ce0 - 0x803c0d50
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
GPMC revision 5.0
gpmc: irq-20 could not claim: err -22
OMAP GPIO hardware version 2.5
omap_mux_init: Add partition: #1: core, flags: 0
OMAP3 Beagle Rev: xM Ax/Bx
Reprogramming SDRC clock to 400000000 Hz
dpll3_m2_clk rate change failed: -22
 usbhs_omap: alias fck already exists
Found NAND on CS0
Registering NAND on CS0
OMAP DMA hardware revision 5.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
twl 1-0048: PIH (irq 7) chaining IRQs 320..328
twl 1-0048: power (irq 325) chaining IRQs 328..335
twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
VUSB1V5: 1500 mV normal standby
VUSB1V8: 1800 mV normal standby
VUSB3V1: 3100 mV normal standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
vdd_mpu_iva: 600 <--> 1450 mV normal
vdd_core: 600 <--> 1450 mV normal
VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
VDAC: 1800 mV normal standby
VDVI: 1800 mV normal standby
VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource gp_timer
usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
jffs2: version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 976
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
OMAP DSS rev 2.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
enter max3107 init
omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
console [ttyO2] enabled
omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
brd: module loaded
loop: module loaded
nbd: registered device at major 43
'Low Performance USB Block' driver is deprecated. Please switch to usb-storage
usbcore: registered new interface driver ub
twl4030_madc twl4030_madc: clk disabled, enabling
st: Version 20101219, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
SCSI Media Changer driver v0.25
Rounding down aligned max_sectors from 4294967295 to 4294967288
NAND device: Manufacturer ID: 0x20, Chip ID: 0xba (ST Micro NAND 256MiB 1,8V 16-bit), page size: 2048, OOB size: 64
Creating 5 MTD partitions on "omap2-nand.0":
0x000000000000-0x000000080000 : "X-Loader"
0x000000080000-0x000000260000 : "U-Boot"
0x000000260000-0x000000280000 : "U-Boot Env"
0x000000280000-0x000000680000 : "Kernel"
0x000000680000-0x000010000000 : "File System"
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
input: twl4030_pwrbutton as /devices/platform/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
i2c /dev entries driver
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
omap_hsmmc omap_hsmmc.0: Failed to get debounce clk
omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62
Synopsys Designware Multimedia Card Interface Driver
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400usbcore: registered new interface driver vub300
usbcore: registered new interface driver ushc
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
ThumbEE CPU extension supported.
clock: disabling unused clocks to save power
omapfb omapfb: no driver for display: dvi
omapfb omapfb: no displays
omapfb omapfb: failed to setup omapfb
omapfb: probe of omapfb failed with error -22
failed to register omapfb driver
VDVI: incomplete constraints, leaving on
VDAC: incomplete constraints, leaving on
VMMC1: incomplete constraints, leaving on
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p2...