Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- (Re)start USB...
- USB0: USB EHCI 1.00
- scanning bus 0 for devices... 3 USB Device(s) found
- scanning usb for storage devices... 1 Storage Device(s) found
- reading /dts/kirkwood-nsa320s.dtb
- 13298 bytes read in 37 ms (350.6 KiB/s)
- reading /uImage
- 3194112 bytes read in 225 ms (13.5 MiB/s)
- reading /uInitrd
- 7217568 bytes read in 472 ms (14.6 MiB/s)
- ## Booting kernel from Legacy Image at 00800000 ...
- Image Name: vmlinuz-4.5.0-kirkwood-tld-1
- Created: 2016-03-22 20:07:04 UTC
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3194048 Bytes = 3 MiB
- Load Address: 00008000
- Entry Point: 00008000
- Verifying Checksum ... OK
- ## Loading init Ramdisk from Legacy Image at 01100000 ...
- Image Name: initrd.img-4.5.0-kirkwood-tld-1
- Created: 2016-03-22 20:07:49 UTC
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 7217504 Bytes = 6.9 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01c00000
- Booting using the fdt blob at 0x1c00000
- Loading Kernel Image ... OK
- Loading Ramdisk to 0f439000, end 0fb1b160 ... OK
- Loading Device Tree to 0f432000, end 0f4383f1 ... OK
- Using machid 0x118f from environment
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.5.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #4 PREEMPT Fri Mar 16
- [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
- [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
- [ 0.000000] Machine model: Zyxel NSA320S
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=5 rootfstype=ext4 mtdparts=orion_nand:0x1)
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 243348K/262144K available (6112K kernel code, 599K rwdata, 2024K rodata, 300K init, 315K bss, 18796K re)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc07fa588 (8138 kB)
- [ 0.000000] .init : 0xc07fb000 - 0xc0846000 ( 300 kB)
- [ 0.000000] .data : 0xc0846000 - 0xc08dbc8c ( 600 kB)
- [ 0.000000] .bss : 0xc08dbc8c - 0xc092abe0 ( 316 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
- [ 0.000010] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
- [ 0.000370] Console: colour dummy device 80x30
- [ 0.000404] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064)
- [ 0.090104] pid_max: default: 32768 minimum: 301
- [ 0.090235] Security Framework initialized
- [ 0.090321] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.090343] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.091332] CPU: Testing write buffer coherency: ok
- [ 0.091837] Setting up static identity map for 0x8200 - 0x8258
- [ 0.092200] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
- [ 0.096495] devtmpfs: initialized
- [ 0.102739] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.103073] prandom: seed boundary self test passed
- [ 0.107580] prandom: 100 self tests passed
- [ 0.107609] pinctrl core: initialized pinctrl subsystem
- [ 0.109213] NET: Registered protocol family 16
- [ 0.109690] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.140119] cpuidle: using governor ladder
- [ 0.170118] cpuidle: using governor menu
- [ 0.170653] Feroceon L2: Enabling L2
- [ 0.170701] Feroceon L2: Cache support initialised.
- [ 0.171163] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
- [ 0.177563] No ATAGs?
- [ 0.211708] vgaarb: loaded
- [ 0.212115] usbcore: registered new interface driver usbfs
- [ 0.212214] usbcore: registered new interface driver hub
- [ 0.212283] usbcore: registered new device driver usb
- [ 0.213538] clocksource: Switched to clocksource orion_clocksource
- [ 0.265486] VFS: Disk quotas dquot_6.6.0
- [ 0.265566] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.278280] NET: Registered protocol family 2
- [ 0.279170] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.279214] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.279249] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.279314] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.279339] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.279561] NET: Registered protocol family 1
- [ 0.279984] RPC: Registered named UNIX socket transport module.
- [ 0.279998] RPC: Registered udp transport module.
- [ 0.280007] RPC: Registered tcp transport module.
- [ 0.280015] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.280357] Unpacking initramfs...
- [ 1.030565] Freeing initrd memory: 7052K (cf439000 - cfb1c000)
- [ 1.030742] NetWinder Floating Point Emulator V0.97 (double precision)
- [ 1.032002] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 1.032088] audit: initializing netlink subsys (disabled)
- [ 1.032145] audit: type=2000 audit(1.020:1): initialized
- [ 1.032540] Initialise system trusted keyring
- [ 1.032975] zbud: loaded
- [ 1.033849] NFS: Registering the id_resolver key type
- [ 1.033893] Key type id_resolver registered
- [ 1.033903] Key type id_legacy registered
- [ 1.033935] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 1.033955] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 1.034215] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 1.034825] Key type big_key registered
- [ 1.058104] Key type asymmetric registered
- [ 1.058128] Asymmetric key parser 'x509' registered
- [ 1.058234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.058255] io scheduler noop registered
- [ 1.058271] io scheduler deadline registered
- [ 1.058340] io scheduler cfq registered (default)
- [ 1.059859] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
- [ 1.060647] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated
- [ 1.061142] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated
- [ 1.062103] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00
- [ 1.062125] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
- [ 1.062141] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
- [ 1.062156] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 1.062585] PCI: bus0: Fast back to back transfers disabled
- [ 1.062615] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.062824] PCI: bus1: Fast back to back transfers enabled
- [ 1.062928] pci 0000:00:01.0: PCI bridge to [bus 01]
- [ 1.063305] mv_xor f1060800.xor: Marvell shared XOR driver
- [ 1.104352] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 1.104607] mv_xor f1060900.xor: Marvell shared XOR driver
- [ 1.144322] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
- [ 1.144842] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 1.146416] console [ttyS0] disabled
- [ 1.146486] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 10416666) is a 16550A
- [ 1.760266] console [ttyS0] enabled
- [ 1.765236] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
- [ 1.771562] nand: Eon NAND 128MiB 3,3V 8-bit
- [ 1.775855] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 1.783399] Scanning device for bad blocks
- [ 1.792616] Bad eraseblock 100 at 0x000000c80000
- [ 1.802296] Bad eraseblock 200 at 0x000001900000
- [ 1.848623] 2 cmdlinepart partitions found on MTD device orion_nand
- [ 1.854881] Creating 2 MTD partitions on "orion_nand":
- [ 1.859998] 0x000000000000-0x000000100000 : "uboot"
- [ 1.866330] 0x000000100000-0x000000180000 : "uboot_env"
- [ 1.874093] libphy: Fixed MDIO Bus: probed
- [ 1.878547] libphy: orion_mdio_bus: probed
- [ 1.882670] mdio_bus f1072004.mdio-bu:01: mdio_device_register
- [ 1.888842] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
- [ 1.896245] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.902768] ehci-pci: EHCI PCI platform driver
- [ 1.907337] ehci-orion: EHCI orion driver
- [ 1.911519] orion-ehci f1050000.ehci: EHCI Host Controller
- [ 1.917072] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
- [ 1.924915] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
- [ 1.943578] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
- [ 1.949803] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.956593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.963807] usb usb1: Product: EHCI Host Controller
- [ 1.968669] usb usb1: Manufacturer: Linux 4.5.0-kirkwood-tld-1 ehci_hcd
- [ 1.975271] usb usb1: SerialNumber: f1050000.ehci
- [ 1.980794] hub 1-0:1.0: USB hub found
- [ 1.984618] hub 1-0:1.0: 1 port detected
- [ 1.989621] mousedev: PS/2 mouse device common for all mice
- [ 1.995633] i2c /dev entries driver
- [ 2.001756] ht1382 0-0068: rtc core: registered ht1382 as rtc0
- [ 2.010232] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.016086] drop_monitor: Initializing network drop monitor service
- [ 2.022643] NET: Registered protocol family 17
- [ 2.027404] Key type dns_resolver registered
- [ 2.032598] registered taskstats version 1
- [ 2.036759] Loading compiled-in X.509 certificates
- [ 2.041595] zswap: loaded using pool lzo/zbud
- [ 2.056241] Key type encrypted registered
- [ 2.062166] ht1382 0-0068: setting system clock to 2016-03-22 12:29:50 UTC (1458649790)
- [ 2.072773] Freeing unused kernel memory: 300K (c07fb000 - c0846000)
- Loading, please wait...
- [ 2.159022] systemd-udevd[77]: starting version 215
- [ 2.176117] random: systemd-udevd urandom read with 3 bits of entropy available
- [ 2.303655] usb 1-1: new high-speed USB device number 2 using orion-ehci
- [ 2.385413] SCSI subsystem initialized
- [ 2.445395] sata_mv f1080000.sata: slots 32 ports 2
- [ 2.465572] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 2.472275] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.491647] usb 1-1: Product: USB2.0 Hub
- [ 2.501612] hub 1-1:1.0: USB hub found
- [ 2.509605] hub 1-1:1.0: 4 ports detected
- [ 2.515832] scsi host0: sata_mv
- [ 2.533727] scsi host1: sata_mv
- [ 2.537277] ata1: SATA max UDMA/133 irq 32
- [ 2.541362] ata2: SATA max UDMA/133 irq 32
- [ 2.793590] usb 1-1.1: new high-speed USB device number 3 using orion-ehci
- [ 2.906974] ata1: SATA link down (SStatus 0 SControl F300)
- [ 2.917176] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6387
- [ 2.924199] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.931523] usb 1-1.1: Product: Intenso Basic Line
- [ 2.936321] usb 1-1.1: Manufacturer: Alcor Tech
- [ 2.940833] usb 1-1.1: SerialNumber: 14042100013063
- [ 2.957251] usb-storage 1-1.1:1.0: USB Mass Storage device detected
- [ 2.963949] scsi host2: usb-storage 1-1.1:1.0
- [ 2.970491] usbcore: registered new interface driver usb-storage
- [ 2.979919] usbcore: registered new interface driver uas
- [ 3.245179] ata2: SATA link down (SStatus 0 SControl F300)
- [ 3.966027] scsi 2:0:0:0: Direct-Access Intenso Basic Line 8.07 PQ: 0 ANSI: 4
- [ 3.984741] sd 2:0:0:0: [sda] 7680000 512-byte logical blocks: (3.93 GB/3.66 GiB)
- [ 3.993093] sd 2:0:0:0: [sda] Write Protect is off
- [ 3.998837] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.018577] sda: sda1 sda2 sda3
- [ 4.026960] sd 2:0:0:0: [sda] Attached SCSI removable disk
- [ 4.037166] sd 2:0:0:0: Attached scsi generic sg0 type 0
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Begin: Checking root file system ... fsck from util-linux 2.25.2
- fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/sda3
- fsck exited with status code 8
- done.
- Warning: File system check failed but did not detect errors
- [ 13.511293] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
- [ 13.518242] EXT4-fs (sda3): write access will be enabled during recovery
- [ 14.818016] EXT4-fs (sda3): recovery complete
- [ 14.834843] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- INIT: version 2.88 booting
- [info] Using makefile-style concurrent boot in runlevel S.
- [....] Starting the hotplug events dispatcher: udevd[ 16.440910] systemd-udevd[290]: starting version 215
- . ok
- [....] Synthesizing the initial hotplug events...[ 16.791225] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ ok done.
- [....] Waiting for /dev to be fully populated...[ 16.986069] random: nonblocking pool is initialized
- [ 17.076831] marvell-cesa f1030000.crypto: CESA device successfully registered
- [ 17.126613] orion_wdt: Initial timeout 25 sec
- done.
- [....] Activating swap...done.
- [ 18.416922] EXT4-fs (sda3): re-mounted. Opts: (null)
- [....] Checking root file system...fsck from util-linux 2.25.2
- rootfs: clean, 17643/207168 files, 152196/828672 blocks
- done.
- [ 18.647781] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
- [....] Activating lvm and md swap...done.
- [....] Checking file systems...fsck from util-linux 2.25.2
- done.
- [....] Loading kernel modules...done.
- [....] Cleaning up temporary files... /tmp. ok
- [....] Mounting local filesystems...done.
- [....] Activating swapfile swap...done.
- [....] Cleaning up temporary files.... ok
- [....] Setting kernel variables ...done.
- [ 22.297002] NET: Registered protocol family 10
- [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
- Copyright 2004-2014 Internet Systems Consortium.
- All rights reserved.
- For info, please visit https://www.isc.org/software/dhcp/
- Cannot find device "eth0"
- Bind socket to interface: No such device
- If you think you have received this message due to a bug rather
- than a configuration issue please read the section on submitting
- bugs on either our web page at www.isc.org or in the README file
- before submitting a bug. These pages explain the proper
- process and the information we find helpful for debugging..
- exiting.
- Failed to bring up eth0.
- done.
- [....] Starting rpcbind daemon.... ok
- [....] Starting NFS common utilities: statd idmapd. ok
- [....] Cleaning up temporary files.... ok
- INIT: Entering runlevel: 2
- [info] Using makefile-style concurrent boot in runlevel 2.
- [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
- 1184 (syslogd)
- . ok
- [....] Starting system message bus: dbus. ok
- [....] Starting NFS common utilities: statd idmapd. ok
- [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok
- [....] Not starting NFS kernel daemon: no exports. ... (warning).
- [....] Starting NTP server: ntpd. ok
- [....] Starting OpenBSD Secure Shell server: sshd. ok
- [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
- 1185 (klogd)
- . ok
- Debian GNU/Linux 8 debian ttyS0
- debian login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement