Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 version : 4.0.0
- rtc[1] value = 0x00010000
- rtc[2] value = 0x00020000
- rtc[3] value = 0x00030000
- DRAM DRIVE INFO: V1.0
- DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM normal_mode value: 00000001
- DRAM CLK =672 MHZ
- PMU: AXP81X
- ddr voltage = 1200 mv
- using ic A83T
- using axp AXP813
- DRAM zq value: 00003bfb
- dram size =2048
- card boot number = 0
- card no is 0
- sdcard 0 line count 0
- [mmc]: mmc driver ver 2014-8-11 15:06:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 14804MB
- [mmc]: vendor: Man 00275048 Snr da895eb1
- [mmc]: product: SD16G
- [mmc]: revision: 3.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- ERROR! NOT find the head of uboot.
- The size of uboot is 000d8000.
- sum=2a137265
- src_sum=2a137265
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- [ 0.300]
- U-Boot 2011.09-rc1-00000-ge7e0a33-dirty (Mar 02 2016 - 18:57:15) Allwinner Technology
- [ 0.309]version: 2.1.0
- normal mode
- [ 0.388]pmbus: normal or secure os
- ready
- [ 0.392]PMU: AXP81X
- [ 0.394]PMU: AXP81X found
- bat_vol=0, ratio=100
- [ 0.399]PMU: dcdc2 900
- [ 0.402]PMU: pll1 1008 Mhz
- AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
- set power on vol to default
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 900, onoff=1
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc6_vol = 900, onoff=1
- aldo1_vol = 1800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- eldo2_vol = 1800, onoff=0
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 3300, onoff=0
- dldo3_vol = 2500, onoff=1
- dldo4_vol = 2800, onoff=0
- fldo2_vol = 900, onoff=1
- gpio0_vol = 3300, onoff=1
- gpio1_vol = 3300, onoff=1
- find power_sply to end
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b04, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b08, value=0xd, pmu_vol=3300
- supply=dldo3
- axp=axp81x, supply=dldo3, vol=1800
- reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b10, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b14, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b18, value=0xd, pmu_vol=3300
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3300
- reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
- supply=aldo3
- axp=axp81x, supply=aldo3, vol=3000
- reg addr=0x1f02f00, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- vbus exist
- no battery, limit to dc
- ac100 reg 0x00 = 0x101
- ac100 reg 0xd0 = 0x0
- ac100 reg 0xd1 = 0x0
- fel key old mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- [ 0.629]DRAM: 2 GiB
- relocation Offset is: 75af7000
- user_gpio config
- user_gpio ok
- gic: normal or no secure os mode
- script config pll_de to 504 Mhz
- script config pll_video1 to 297 Mhz
- Not Found clk pll_video in script
- enable power vcc-hdmi-18, ret=0
- DRV_DISP_Init end
- [ 0.867]boot_disp.output_disp=1
- [ 0.871]boot_disp.output_type=3
- [ 0.874]boot_disp.output_mode=10
- [ 0.877]fetch script data boot_disp.auto_hpd fail
- disp1 device type(4) enable
- attched ok, mgr1<-->device1, type=4, mode=10----
- ready to set mode
- workmode = 0
- MMC: 0
- [ 0.912][mmc]: mmc driver ver 2015-04-13 14:50:00
- [ 0.917][mmc]: get sdc_phy_wipe fail.
- [ 0.921][mmc]: get sdc0 sdc_erase fail.
- [ 0.925][mmc]: get sdc_f_max fail,use default 50000000Hz
- [ 0.930][mmc]: get sdc_ex_dly_used fail,use default dly
- [ 0.936][mmc]: SUNXI SD/MMC: 0
- [ 0.949][mmc]: *Try SD card 0*
- [ 0.982][mmc]: CID 0x27504853 0x44313647 0x30da895e 0xb100fbf5
- [ 0.987][mmc]: mmc clk 50000000
- [ 0.991][mmc]: SD/MMC Card: 4bit, capacity: 14804MB
- [ 0.996][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
- [ 1.001][mmc]: ***SD/MMC 0 init OK!!!***
- [ 1.006][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
- [ 1.011][mmc]: secure_feature 0x0
- [ 1.015][mmc]: secure_removal_type 0x0
- [ 1.019]sunxi flash init ok
- [ 1.023][mmc]: MMC Device 2 not found
- [ 1.027][mmc]: Can not find mmc dev
- [ 1.031][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
- sunxi_secstorage_read fail
- get secure storage map err
- sunxi secure storage is not supported
- private partition is not exist
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:6-
- -name- -start- -size-
- boot-res : 1000000 2000000
- env : 3000000 1000000
- boot : 4000000 1000000
- rootfs : 5000000 20000000
- klog : 25000000 1000000
- UDISK : 26000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- recovery key high 10, low 8
- cant find fstbt value
- no misc partition is found
- to be run cmd=run setargs_mmc boot_normal
- serial is: 00000000000000000000
- mount part name boot-res
- cant open script.bin, maybe it is not exist
- WORK_MODE_BOOT
- board_status_probe
- [ 1.131]pre sys mode
- sunxi_bmp_logo_display
- [ 1.436]fetch script data boot_disp.output_disp fail
- [ 1.441]screen_id =1, screen_width =1920, screen_height =1080
- [ 1.447]frame buffer address 46400000
- [ 1.451]Hit any key to stop autoboot: 0
- [ 4.706][mmc]: MMC Device 2 not found
- ** Invalid boot device **
- ** Unable to read "bananapi/bpi-m3/linux/uEnv.txt" from mmc 0:1 **
- ** Unable to read "uEnv.txt" from mmc 0:1 **
- read boot or recovery all
- [ 5.457]sunxi flash read :offset 4000000, 17350163 bytes OK
- [ 5.467]ready to boot
- [ 5.469][mmc]: MMC Device 2 not found
- [ 5.473][mmc]: mmc not find,so not exit
- [ 5.477]
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 2048MB
- ion_carveout reserve: 96m 128m
- ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
- ion_cma reserve: 120m 176m 512m
- ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
- ------sun8i_smp_init_ops----37-----
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.42-BPI-M3-Kernel (root@opennms) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) 6
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 524288
- [ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
- [ 0.000000] Normal zone: 1404 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3204 pages used for memmap
- [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] [mcpm_smp_init_cpus] ncores=8
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
- [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
- [ 0.000000] Kernel command line: boot_type=1 disp_para=40a0000 fb_base=0x0 config_size=55504 androidboot.serialno=00000000000000000000 androidboot.hardware=sun8i enforcin2
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 2048MB = 2048MB total
- [ 0.000000] Memory: 1535580k/1535580k available, 561572k reserved, 933888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0ae0dbc (11108 kB)
- [ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
- [ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
- [ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001428] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.001501] pid_max: default: 32768 minimum: 301
- [ 0.001833] Mount-cache hash table entries: 512
- [ 0.003177] Initializing cgroup subsys cpuacct
- [ 0.003222] Initializing cgroup subsys memory
- [ 0.003296] Initializing cgroup subsys devices
- [ 0.003331] Initializing cgroup subsys freezer
- [ 0.003363] Initializing cgroup subsys blkio
- [ 0.003416] Initializing cgroup subsys perf_event
- [ 0.003515] CPU: Testing write buffer coherency: ok
- [ 0.003606] ftrace: allocating 27618 entries in 81 pages
- [ 0.040302] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.040387] Setting up static identity map for 0x4076b3f8 - 0x4076b450
- [ 0.010000] CPU1: Booted secondary processor
- [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.010000] CPU2: Booted secondary processor
- [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.010000] CPU3: Booted secondary processor
- [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.260089] CPU4: failed to boot: -22
- [ 0.300069] CPU5: failed to boot: -22
- [ 0.340072] CPU6: failed to boot: -22
- [ 0.380093] CPU7: failed to boot: -22
- [ 0.380310] Brought up 4 CPUs
- [ 0.380336] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.380913] devtmpfs: initialized
- [ 0.390669] pinctrl core: initialized pinctrl subsystem
- [ 0.411945] NET: Registered protocol family 16
- [ 0.434038] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.434151] script_sysfs_init success
- [ 0.434205] sunxi_dump_init success
- [ 0.435343] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.437164] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.437629] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
- [ 0.439167] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.439211] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.440294] [sunxi-module]: [sunxi-module.0] probe success
- [ 0.440762] script config pll_video1 to 297 Mhz
- [ 0.440798] script config pll_ve to 432 Mhz
- [ 0.440823] Not Found clk pll_periph in script
- [ 0.440851] script config pll_gpu to 432 Mhz
- [ 0.440880] script config pll_hsic to 480 Mhz
- [ 0.440908] script config pll_de to 504 Mhz
- [ 0.440930] sunxi_default_clk_init
- [ 0.440950] try to set pll6ahb1 to 200000000
- [ 0.441012] try to set ahb clk source to pll6ahb1
- [ 0.441036] set ahb clk source to pll6ahb1
- [ 0.441061] try to set ahb1 to 200000000
- [ 0.441086] try to set apb1 to 100000000
- [ 0.442316] ===fe3o4==== sunxi_root_procfs_attach ret:0
- [ 0.452186] bio: create slab <bio-0> at 0
- [ 0.452186] [ARISC] :sunxi-arisc driver v1.70
- [ 0.464310] [ARISC] :arisc version: [v0.1.25.3]
- [ 0.464366] [sunxi-module]: arisc register success
- [ 0.464798] sunxi_get_soc_bin: slow chip
- [ 0.465247] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
- [ 0.010000] CPU4: Booted secondary processor
- [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
- [ 0.010000] CPU5: Booted secondary processor
- [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
- [ 0.010000] CPU6: Booted secondary processor
- [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
- [ 0.010000] CPU7: Booted secondary processor
- [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
- [ 0.491457] SCSI subsystem initialized
- [ 0.491457] libata version 3.00 loaded.
- [ 0.491457] usbcore: registered new interface driver usbfs
- [ 0.491457] usbcore: registered new interface driver hub
- [ 0.491457] usbcore: registered new device driver usb
- [ 0.491457] twi_chan_cfg()335 - [twi0] has no twi_regulator.
- [ 0.491457] twi_chan_cfg()335 - [twi1] has no twi_regulator.
- [ 0.491457] twi_chan_cfg()335 - [twi2] has no twi_regulator.
- [ 0.491695] Linux video capture interface: v2.00
- [ 0.510405] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.511071] Bluetooth: Core ver 2.16
- [ 0.511140] NET: Registered protocol family 31
- [ 0.511166] Bluetooth: HCI device and connection manager initialized
- [ 0.511199] Bluetooth: HCI socket layer initialized
- [ 0.511225] Bluetooth: L2CAP socket layer initialized
- [ 0.511272] Bluetooth: SCO socket layer initialized
- [ 0.511565] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.511655] Switching to clocksource arch_sys_counter
- [ 0.538312] FS-Cache: Loaded
- [ 0.538664] CacheFiles: Loaded
- [ 0.550456] axp81x_dcdc1: Failed to create debugfs directory
- [ 0.551705] NET: Registered protocol family 2
- [ 0.552101] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.552879] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.555377] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.556958] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.556989] TCP: reno registered
- [ 0.557016] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.557084] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.557547] NET: Registered protocol family 1
- [ 0.558004] RPC: Registered named UNIX socket transport module.
- [ 0.558038] RPC: Registered udp transport module.
- [ 0.558062] RPC: Registered tcp transport module.
- [ 0.558086] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.559104] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.559298] [pm]aw_pm_init!
- [ 0.559325] standby_mode = 1.
- [ 0.559345] wakeup src cnt is : 2.
- [ 0.559373] pmu name: pmu1_para .
- [ 0.559399] pmu1_enable = 0x1.
- [ 0.559420] pmux_id = 0x7.
- [ 0.559442] pmu name: pmu2_para .
- [ 0.559465] config_pmux_para: script_parser_fetch err.
- [ 0.559490] pmu2_enable = 0x0.
- [ 0.559909] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.560164] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.560205] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.560298] after inited: sys_mask config = 0xebd5.
- [ 0.560327] dynamic_standby enalbe = 0x0.
- [ 0.560383] sunxi_reg_init enter
- [ 0.560724] lock super standby for a83!
- [ 0.560757] lookup_scene_lock_name: new scene lock super_standby
- [ 0.560786] scene_lock_init name=super_standby
- [ 0.560812] scene_lock: super_standby, type 5, count 1
- [ 0.562741] highmem bounce pool size: 64 pages
- [ 0.570760] VFS: Disk quotas dquot_6.5.2
- [ 0.571145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.573309] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.573877] NFS: Registering the id_resolver key type
- [ 0.574704] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.575984] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.576435] fuse init (API version 7.18)
- [ 0.577578] ceph: loaded (mds proto 32)
- [ 0.577625] msgmni has been set to 1175
- [ 0.586062] alg: No test for stdrng (krng)
- [ 0.669602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.669664] io scheduler noop registered
- [ 0.669688] io scheduler deadline registered
- [ 0.669896] io scheduler cfq registered (default)
- [ 0.670466] pwm module init!
- [ 0.671084] [DISP]disp_module_init
- [ 0.732099] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
- [ 0.765293] Console: switching to colour frame buffer device 240x67
- [ 0.798428] [DISP]disp_module_init finish
- [ 0.874066] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.874275] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.874443] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 0.970493] console [ttyS0] enabled
- [ 1.168234] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.375903] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 1.609726] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.812393] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
- [ 2.017166] [drm] Initialized drm 1.1.0 20060810
- [ 2.221331] brd: module loaded
- [ 2.412188] loop: module loaded
- [ 2.609913] [rf_pm]: select module num is 10
- [ 2.812923] [rf_pm]: module power1 name vcc-wifi-io
- [ 3.005886] [rf_pm]: failed to fetch module_power1_vol
- [ 3.079220] [rf_pm]: module power2 name
- [ 3.089584] [rf_pm]: failed to fetch module_power2_vol
- [ 3.101289] [rf_pm]: module power3 name
- [ 3.111570] [rf_pm]: failed to fetch module_power3_vol
- [ 3.123222] [rf_pm]: mod has no power_switch gpio
- [ 3.134379] [rf_pm]: mod has no chip_en gpio
- [ 3.145084] [rf_pm]: lpo_use_apclk: ac10032k2
- [ 3.155985] [rf_pm]: get power regulator failed.
- [ 3.167079] [rf_pm]: enable vcc-wifi-io.
- [ 3.177794] [rf_pm]: mod info power switch -1
- [ 3.188512] [rf_pm]: set ac10032k2 32k out
- [ 3.198864] scene_lock_init name=rf_pm
- [ 3.209166] [wifi_pm]: wifi gpio init is OK !!
- [ 3.220072] [rfkill]: mod has no ls_int gpio
- [ 3.230716] [rfkill]: mod has no pcm_ch gpio
- [ 3.241633] [rfkill]: rfkill set power 0
- [ 3.270110] Loading iSCSI transport class v2.0-870.
- [ 3.281848] iscsi: registered transport (tcp)
- [ 3.293011] [spi]: Found 1 spi devices in config files
- [ 3.304654] boards_num modalias max_spd_hz bus_num cs mode
- [ 3.319071] 0 spidev 33000000 0 0 3
- [ 3.333929] axp81x_dcdc1: Failed to create debugfs directory
- [ 3.346600] spi spi0: master is unqueued, this is deprecated
- [ 3.359362] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
- [ 3.373842] [spi-0]: driver probe succeed, base f1c68000, irq 97!
- [ 3.388383] usbcore: registered new interface driver qf9700
- [ 3.400931] usbcore: registered new interface driver smsc95xx
- [ 3.413583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.447209] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.462509] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 3.478226] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 3.510089] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 3.522943] ehci_irq: highspeed device connect
- [ 3.523063] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.523076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.523089] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.523100] usb usb1: Manufacturer: Linux 3.4.42-BPI-M3-Kernel ehci_hcd
- [ 3.523111] usb usb1: SerialNumber: sunxi-ehci
- [ 3.601836] hub 1-0:1.0: USB hub found
- [ 3.612334] hub 1-0:1.0: 1 port detected
- [ 3.623349] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.656666] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.671658] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
- [ 3.686577] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 3.754145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.768215] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.782723] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.797134] usb usb2: Manufacturer: Linux 3.4.42-BPI-M3-Kernel ohci_hcd
- [ 3.810961] usb usb2: SerialNumber: sunxi-ohci
- [ 3.822951] hub 2-0:1.0: USB hub found
- [ 3.833543] hub 2-0:1.0: 1 port detected
- [ 3.844587] Initializing USB Mass Storage driver...
- [ 3.856387] usbcore: registered new interface driver usb-storage
- [ 3.869318] USB Mass Storage support registered.
- [ 3.880745] usbcore: registered new interface driver ums-alauda
- [ 3.893629] usbcore: registered new interface driver ums-cypress
- [ 3.906517] usbcore: registered new interface driver ums-datafab
- [ 3.919345] usbcore: registered new interface driver ums_eneub6250
- [ 3.932346] usbcore: registered new interface driver ums-freecom
- [ 3.940123] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
- [ 3.958692] usbcore: registered new interface driver ums-isd200
- [ 3.971462] usbcore: registered new interface driver ums-jumpshot
- [ 3.984372] usbcore: registered new interface driver ums-karma
- [ 3.996934] usbcore: registered new interface driver ums-onetouch
- [ 4.009765] usbcore: registered new interface driver ums-realtek
- [ 4.022443] usbcore: registered new interface driver ums-sddr09
- [ 4.034961] usbcore: registered new interface driver ums-sddr55
- [ 4.047451] usbcore: registered new interface driver ums-usbat
- [ 4.059895] usbcore: registered new interface driver usbserial
- [ 4.072238] usbcore: registered new interface driver usbserial_generic
- [ 4.085323] USB Serial support registered for generic
- [ 4.090677] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
- [ 4.090690] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 4.090702] usb 1-1: Product: USB 2.0 Hub
- [ 4.091336] hub 1-1:1.0: USB hub found
- [ 4.091550] hub 1-1:1.0: 4 ports detected
- [ 4.154533] usbserial: USB Serial Driver core
- [ 4.165654] file system registered
- [ 4.177280] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 4.191010] android_usb gadget: Number of LUNs=3
- [ 4.202123] lun0: LUN: removable file: (no medium)
- [ 4.213495] lun1: LUN: removable file: (no medium)
- [ 4.224766] lun2: LUN: removable file: (no medium)
- [ 4.236323] get usb_serial_number success from boot command line
- [ 4.243003] android_usb gadget: android_usb ready
- [ 4.260312] axp81x_dcdc1: Failed to create debugfs directory
- [ 4.272469] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
- [ 4.285084] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
- [ 4.300299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.313779] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.327670] usb usb3: Product: sunxi_hcd host driver
- [ 4.338950] usb usb3: Manufacturer: Linux 3.4.42-BPI-M3-Kernel sunxi_hcd-hcd
- [ 4.352670] usb usb3: SerialNumber: sunxi_hcd_host0
- [ 4.364597] hub 3-0:1.0: USB hub found
- [ 4.374576] hub 3-0:1.0: 1 port detected
- [ 4.385801] mousedev: PS/2 mouse device common for all mice
- [ 4.398201] sunxikbd_script_init: key para not found, used default para.
- [ 4.412435] sunxi_rtc_init(796): sunxi rtc device register!
- [ 4.412547] keyname:ctp_para subname:ctp_power_io ,get error!
- [ 4.436667] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
- [ 4.437323] get sysconfig para erro!
- [ 4.437345] get sysconfig para erro!
- [ 4.437364] get sysconfig para erro!
- [ 4.437383] get sysconfig para erro!
- [ 4.437433] ctp_wakeup: !!!!gpio data 1
- [ 4.437520] rtc_gettime(333): read time 2016-3-2 19:20:42
- [ 4.437938] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
- [ 4.438411] rtc_gettime(333): read time 2016-3-2 19:20:42
- [ 4.438678] rtc0 rtc0: rtc core: registered rtc0 as rtc0
- [ 4.438922] sunxi_rtc_probe(756)!
- [ 4.439009] i2c /dev entries driver
- [ 4.439665] IR RC5(x) protocol handler initialized
- [ 4.439857] sunxi cedar version 0.1
- [ 4.439937] [cedar]: install start!!!
- [ 4.440217] [cedar]: install end!!!
- [ 4.440255] Driver for 1-wire Dallas network protocol.
- [ 4.446559] Bluetooth: HCI UART driver ver 2.2
- [ 4.446571] Bluetooth: HCI H4 protocol initialized
- [ 4.446580] Bluetooth: HCI BCSP protocol initialized
- [ 4.446589] Bluetooth: HCI Realtek H5 protocol initialized
- [ 4.447269] sunxi_get_soc_bin: slow chip
- [ 4.449988] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.113 2015-5-20 17:17) Compiled in Mar 2 2016 at 19:29:06
- [ 4.450092] [mmc]: get mmc1's sdc_power is null!
- [ 4.450112] [mmc]: get mmc2's 2xmode ok, val = 1
- [ 4.450117] [mmc]: get mmc2's ddrmode ok, val = 1
- [ 4.450126] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
- [ 4.540058] get_device_para_value:get subname:icn83xx_ts error! val.val:0
- [ 4.540066] get_detect_list: script_get_item err.support_number = 11.
- [ 4.540074] get_device_para_value:get subname:gt818_ts error! val.val:0
- [ 4.540079] get_detect_list: script_get_item err.support_number = 8.
- [ 4.540085] get_device_para_value:get subname:tu_ts error! val.val:0
- [ 4.540091] get_detect_list: script_get_item err.support_number = 7.
- [ 4.540098] get_device_para_value:get subname:gt9xxf_ts error! val.val:0
- [ 4.540103] get_detect_list: script_get_item err.support_number = 6.
- [ 4.540111] get_device_para_value:get subname:gslX680new error! val.val:0
- [ 4.540117] get_detect_list: script_get_item err.support_number = 3.
- [ 4.540157] sw_get_write_info:open error ....IS(filp):1
- [ 4.540173] sw_set_write_info:open error ....IS(filp):1
- [ 4.540177] get write info erro!
- [ 4.540360] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
- [ 4.560189] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
- [ 4.580189] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
- [ 4.600187] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
- [ 4.603753] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.620198] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
- [ 4.712287] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0718
- [ 4.712296] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
- [ 4.712303] usb 1-1.1: Product: USB Storage
- [ 4.712309] usb 1-1.1: SerialNumber: 000000000033
- [ 4.747095] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.748652] [mmc]: sdc0 fail to get regulator
- [ 4.748658] [mmc]: *** sunxi_mci_set_ios(L2159): sdc0 card_power_on fail
- [ 4.888492] scsi0 : usb-storage 1-1.1:1.0
- [ 4.890044] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.910847] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
- [ 4.911679] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
- [ 4.911702] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.914175] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.915580] *******************Try sdio*******************
- [ 4.916395] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.917222] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.918047] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.918872] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.918893] *******************Try sd *******************
- [ 4.919532] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.919623] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.922091] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.941510] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.941606] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.942672] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 4.942729] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 4.942832] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 4.942893] mmc0: new high speed SDHC card at address 0007
- [ 4.943229] mmcblk0: mmc0:0007 SD16G 14.4 GiB
- [ 4.944660] mmcblk0: p1 p2
- [ 4.945274] *******************sd init ok*******************
- [ 5.094328] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.095398] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.110030] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.130850] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
- [ 5.131682] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
- [ 5.131703] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.134167] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.136058] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 8, RTO !!
- [ 5.136079] *******************Try sdio*******************
- [ 5.136893] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
- [ 5.137718] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
- [ 5.138543] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
- [ 5.139368] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
- [ 5.139388] *******************Try sd *******************
- [ 5.140203] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
- [ 5.141033] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
- [ 5.141860] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
- [ 5.142688] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
- [ 5.142707] *******************Try mmc*******************
- [ 5.142716] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.143118] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.143201] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.143284] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.145742] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.200228] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
- [ 5.221261] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.233219] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.233633] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.506133] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.506621] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 5.506728] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 5.506797] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 5.506877] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
- [ 5.506951] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
- [ 5.507073] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
- [ 5.507142] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 5.507191] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 5.507257] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 5.507332] mmc1: new high speed DDR MMC card at address 0001
- [ 5.507693] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB
- [ 5.507843] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB
- [ 5.507969] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB
- [ 5.509181] mmcblk1: p1 p2
- [ 5.510122] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 5.510929] mmcblk1boot1: unknown partition table
- [ 5.511428] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
- [ 5.512506] mmcblk1boot0: unknown partition table
- [ 5.512692] *******************mmc init ok *******************
- [ 5.539164] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1006
- [ 5.539172] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.539180] usb 1-1.2: Product: Keyboard Hub
- [ 5.539185] usb 1-1.2: Manufacturer: Apple, Inc.
- [ 5.539191] usb 1-1.2: SerialNumber: 000000000000
- [ 5.539755] hub 1-1.2:1.0: USB hub found
- [ 5.539908] hub 1-1.2:1.0: 3 ports detected
- [ 5.720937] no red_led, ignore it!
- [ 5.820198] usb 1-1.2.2: new low-speed USB device number 5 using sunxi-ehci
- [ 5.865639] Registered led device: green_led
- [ 5.898486] Registered led device: blue_led
- [ 5.906416] Registered led device: sunxi_respiration_lamp
- [ 5.917387] usbcore: registered new interface driver usbhid
- [ 5.926874] usbhid: USB HID core driver
- [ 5.934851] ac100_probe,line:2917
- [ 5.936907] usb 1-1.2.2: New USB device found, idVendor=05ac, idProduct=0250
- [ 5.936915] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.936922] usb 1-1.2.2: Product: Apple Keyboard
- [ 5.936927] usb 1-1.2.2: Manufacturer: Apple Inc.
- [ 5.942756] apple 0003:05AC:0250.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-sunxi-ehci-1.2.2/input0
- [ 5.946826] apple 0003:05AC:0250.0002: input,hidraw1: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-sunxi-ehci-1.2.2/input1
- [ 6.020268] usb 1-1.2.3: new low-speed USB device number 6 using sunxi-ehci
- [ 6.042867] asoc: ac100-aif1 <-> pri_dai mapping ok
- [ 6.052022] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
- [ 6.061275] ------------audio_hmic_irq----------
- [ 6.070999] asoc: ac100-aif1 <-> sec_dai mapping ok
- [ 6.083619] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
- [ 6.093205] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
- [ 6.107566] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
- [ 6.118186] IPv4 over IPv4 tunneling driver
- [ 6.121264] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0016 PQ: 0 ANSI: 4
- [ 6.123162] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.125951] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
- [ 6.127201] sd 0:0:0:0: [sda] Asking for cache data failed
- [ 6.127208] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 6.131071] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
- [ 6.132194] sd 0:0:0:0: [sda] Asking for cache data failed
- [ 6.132200] sd 0:0:0:0: [sda] Assuming drive cache: write through
- [ 6.132207] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 6.146033] usb 1-1.2.3: New USB device found, idVendor=05ac, idProduct=0304
- [ 6.146041] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 6.146048] usb 1-1.2.3: Product: Apple Optical USB Mouse
- [ 6.146054] usb 1-1.2.3: Manufacturer: Mitsumi Electric
- [ 6.150788] apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-sunxi-ehci-1.2.3/input0
- [ 6.278059] TCP: cubic registered
- [ 6.285624] Initializing XFRM netlink socket
- [ 6.294603] NET: Registered protocol family 10
- [ 6.304171] IPv6 over IPv4 tunneling driver
- [ 6.313172] NET: Registered protocol family 17
- [ 6.322033] NET: Registered protocol family 15
- [ 6.331034] Bluetooth: RFCOMM TTY layer initialized
- [ 6.340415] Bluetooth: RFCOMM socket layer initialized
- [ 6.349982] Bluetooth: RFCOMM ver 1.11
- [ 6.357980] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 6.367714] Bluetooth: BNEP filters: protocol multicast
- [ 6.377397] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 6.387962] lib80211: common routines for IEEE802.11 drivers
- [ 6.398088] lib80211_crypt: registered algorithm 'NULL'
- [ 6.407811] Registering the dns_resolver key type
- [ 6.416842] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
- [ 6.427834] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 6.440155] ThumbEE CPU extension supported.
- [ 6.448639] Registering SWP/SWPB emulation handler
- [ 6.457722] sunxi_bootup_extend_init: bootup extend disable(default)
- [ 6.469379] cmdline,disp=40a0000
- [ 6.476845] [HDMI] power vcc-hdmi-18
- [ 7.637714] [DISP] disp_hdmi_set_detect,line:404:hdmi1's mgr is NULL
- [ 7.649719] rtc_gettime(333): read time 2016-3-2 19:20:45
- [ 7.659642] rtc0 rtc0: setting system clock to 2016-03-02 19:20:45 UTC (1456946445)
- [ 7.672980] sunxi_get_soc_bin: slow chip
- [ 7.681738] CPU Budget:Register notifier
- [ 7.689952] CPU Budget:register Success
- [ 7.698074] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 7.715704] =========GPS========= :gsp not used in configuration
- [ 7.726464] ALSA device list:
- [ 7.733734] #0: snddaudio
- [ 7.740785] #1: sndhdmi
- [ 7.748850] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- [ 7.870918] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- [ 8.030054] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.043116] VFS: Mounted root (ext4 filesystem) on device 179:2.
- [ 8.055387] devtmpfs: mounted
- [ 8.063012] Freeing init memory: 352K
- [ 8.070882] Failed to execute /init. Attempting defaults...
- [ 8.250064] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
- [ 18.321676] Adding 131068k swap on /var/swap. Priority:-1 extents:7 across:212988k SS
- Ubuntu 14.04.4 LTS bananapim3 ttyS0
- bananapim3 login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement