daily pastebin goal
4%
SHARE
TWEET

Untitled

a guest Nov 1st, 2016 9 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Booting Linux on physical CPU 0x0
  2. [    0.000000] Linux version 4.4.24-linux4sam_5.5 (rik@debian) (gcc version 4.9.4 (Buildroot 2016.08) ) #9 Tue Nov 1 14:15:51 CET 2016
  3. [    0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
  4. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [    0.000000] Machine model: Atmel SAMA5D2 Xplained
  6. [    0.000000] cma: Reserved 64 MiB at 0x2c000000
  7. [    0.000000] Memory policy: Data cache writeback
  8. [    0.000000] CPU: All CPU(s) started in SVC mode.
  9. [    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
  10. [    0.000000] Kernel command line: console=ttyS0,115200 mtdparts=atmel_nand:17M(bootstrap/kernel)ro,-(rootfs) rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs mem=256M
  11. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  12. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  13. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  14. [    0.000000] Memory: 186532K/262144K available (5163K kernel code, 184K rwdata, 1692K rodata, 212K init, 234K bss, 10076K reserved, 65536K cma-reserved)
  15. [    0.000000] Virtual kernel memory layout:
  16. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  17. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  18. [    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
  19. [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  20. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  21. [    0.000000]       .text : 0xc0008000 - 0xc06ba050   (6857 kB)
  22. [    0.000000]       .init : 0xc06bb000 - 0xc06f0000   ( 212 kB)
  23. [    0.000000]       .data : 0xc06f0000 - 0xc071e1a8   ( 185 kB)
  24. [    0.000000]        .bss : 0xc071e1a8 - 0xc0758cf8   ( 235 kB)
  25. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  26. [    0.000000] L2C-310 ID prefetch enabled, offset 2 lines
  27. [    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  28. [    0.000000] L2C-310 cache controller enabled, 8 ways, 128 kB
  29. [    0.000000] L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x36020000
  30. [    0.000000] clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 11513617062 ns
  31. [    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836475000000ns
  32. [    0.000000] Console: colour dummy device 80x30
  33. [    0.050000] Calibrating delay loop... 329.31 BogoMIPS (lpj=1646592)
  34. [    0.050000] pid_max: default: 32768 minimum: 301
  35. [    0.050000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  36. [    0.050000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  37. [    0.050000] CPU: Testing write buffer coherency: ok
  38. [    0.050000] Setting up static identity map for 0x20008200 - 0x20008258
  39. [    0.050000] devtmpfs: initialized
  40. [    0.070000] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
  41. [    0.070000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  42. [    0.080000] pinctrl core: initialized pinctrl subsystem
  43. [    0.080000] NET: Registered protocol family 16
  44. [    0.110000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  45. [    0.110000] cpuidle: using governor ladder
  46. [    0.110000] cpuidle: using governor menu
  47. [    0.110000] AT91: Detected SoC family: sama5d2
  48. [    0.110000] AT91: Detected SoC: sama5d27, revision 1
  49. [    0.130000] clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
  50. [    0.180000] at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xd081c000
  51. [    0.180000] SCSI subsystem initialized
  52. [    0.180000] usbcore: registered new interface driver usbfs
  53. [    0.180000] usbcore: registered new interface driver hub
  54. [    0.180000] usbcore: registered new device driver usb
  55. [    0.180000] at91_i2c f8028000.i2c: could not find pctldev for node /ahb/apb/pinctrl@fc038000/i2c0_default, deferring probe
  56. [    0.180000] media: Linux media interface: v0.10
  57. [    0.180000] Linux video capture interface: v2.00
  58. [    0.180000] Advanced Linux Sound Architecture Driver Initialized.
  59. [    0.190000] clocksource: Switched to clocksource tcb_clksrc
  60. [    0.240000] NET: Registered protocol family 2
  61. [    0.240000] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  62. [    0.240000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  63. [    0.240000] TCP: Hash tables configured (established 2048 bind 2048)
  64. [    0.240000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  65. [    0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  66. [    0.240000] NET: Registered protocol family 1
  67. [    0.240000] RPC: Registered named UNIX socket transport module.
  68. [    0.240000] RPC: Registered udp transport module.
  69. [    0.240000] RPC: Registered tcp transport module.
  70. [    0.240000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  71. [    0.240000] futex hash table entries: 256 (order: -1, 3072 bytes)
  72. [    0.250000] io scheduler noop registered (default)
  73. [    0.260000] pinctrl-at91-pio4 fc038000.pinctrl: atmel pinctrl initialized
  74. [    0.260000] pinconfig core: failed to register map default (1): no configs given
  75. [    0.270000] f8020000.serial: ttyS0 at MMIO 0xf8020000 (irq = 40, base_baud = 5187500) is a ATMEL_SERIAL
  76. [    0.670000] console [ttyS0] enabled
  77. [    0.680000] f8024000.serial: ttyS1 at MMIO 0xf8024000 (irq = 41, base_baud = 5187500) is a ATMEL_SERIAL
  78. [    0.690000] fc008000.serial: ttyS2 at MMIO 0xfc008000 (irq = 47, base_baud = 5187500) is a ATMEL_SERIAL
  79. [    0.700000] [drm] Initialized drm 1.1.0 20060810
  80. [    0.720000] brd: module loaded
  81. [    0.740000] loop: module loaded
  82. [    0.750000] at91_i2c fc018600.i2c: can't get DMA channel, continue without DMA support
  83. [    0.760000] at91_i2c fc018600.i2c: Using FIFO (16 data)
  84. [    0.760000] at91_i2c fc018600.i2c: AT91 i2c bus driver (hw version: 0x704).
  85. [    0.770000] atmel_nand_nfc c0000000.nfc: NFC is probed.
  86. [    0.780000] atmel_nand 80000000.nand: Use On Flash BBT
  87. [    0.780000] atmel_nand 80000000.nand: Using dma0chan0 for DMA transfers.
  88. [    0.890000] atmel_nand 80000000.nand: Time out to wait for interrupt: 0x01000000
  89. [    0.890000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xf1
  90. [    0.900000] nand: Micron MT29F1G08ABAEAWP
  91. [    0.900000] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  92. [    0.910000] atmel_nand 80000000.nand: Using NFC Sram read
  93. [    0.920000] nand: WARNING: 80000000.nand: the ECC used on your system is too weak compared to the one required by the NAND chip
  94. [    0.930000] 2 cmdlinepart partitions found on MTD device atmel_nand
  95. [    0.930000] Creating 2 MTD partitions on "atmel_nand":
  96. [    0.940000] 0x000000000000-0x000001100000 : "bootstrap/kernel"
  97. [    0.980000] 0x000001100000-0x000008000000 : "rootfs"
  98. [    1.240000] atmel_spi f8000000.spi: version: 0x311
  99. [    1.250000] atmel_spi f8000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers
  100. [    1.260000] atmel_spi f8000000.spi: Using FIFO (16 data)
  101. [    1.260000] atmel_spi f8000000.spi: Atmel SPI Controller at 0xf8000000 (irq 33)
  102. [    1.270000] CAN device driver interface
  103. [    1.280000] m_can f8054000.can: m_can device registered (regs=d0880000, irq=45)
  104. [    1.290000] m_can fc050000.can: m_can device registered (regs=d0890000, irq=56)
  105. [    1.300000] macb f8008000.ethernet: invalid hw address, using random
  106. [    1.310000] libphy: MACB_mii_bus: probed
  107. [    1.400000] macb f8008000.ethernet eth0: Cadence GEM rev 0x00020203 at 0xf8008000 irq 34 (66:5f:27:fd:7d:27)
  108. [    1.410000] macb f8008000.ethernet eth0: attached PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=f8008000.etherne:01, irq=131)
  109. [    1.420000] usbcore: registered new interface driver cdc_ether
  110. [    1.420000] usbcore: registered new interface driver cdc_subset
  111. [    1.430000] usbcore: registered new interface driver zaurus
  112. [    1.440000] usbcore: registered new interface driver cdc_ncm
  113. [    1.440000] usbcore: registered new interface driver huawei_cdc_ncm
  114. [    1.450000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  115. [    1.450000] ehci-atmel: EHCI Atmel driver
  116. [    1.460000] atmel-ehci 500000.ehci: EHCI Host Controller
  117. [    1.470000] atmel-ehci 500000.ehci: new USB bus registered, assigned bus number 1
  118. [    1.480000] atmel-ehci 500000.ehci: irq 25, io mem 0x00500000
  119. [    1.500000] atmel-ehci 500000.ehci: USB 2.0 started, EHCI 1.00
  120. [    1.500000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  121. [    1.510000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  122. [    1.520000] usb usb1: Product: EHCI Host Controller
  123. [    1.520000] usb usb1: Manufacturer: Linux 4.4.24-linux4sam_5.5 ehci_hcd
  124. [    1.530000] usb usb1: SerialNumber: 500000.ehci
  125. [    1.530000] hub 1-0:1.0: USB hub found
  126. [    1.540000] hub 1-0:1.0: 3 ports detected
  127. [    1.540000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  128. [    1.550000] ohci-atmel: OHCI Atmel driver
  129. [    1.550000] at91_ohci 400000.ohci: USB Host Controller
  130. [    1.560000] at91_ohci 400000.ohci: new USB bus registered, assigned bus number 2
  131. [    1.570000] at91_ohci 400000.ohci: irq 25, io mem 0x00400000
  132. [    1.630000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  133. [    1.640000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  134. [    1.640000] usb usb2: Product: USB Host Controller
  135. [    1.650000] usb usb2: Manufacturer: Linux 4.4.24-linux4sam_5.5 ohci_hcd
  136. [    1.650000] usb usb2: SerialNumber: at91
  137. [    1.660000] hub 2-0:1.0: USB hub found
  138. [    1.670000] hub 2-0:1.0: 3 ports detected
  139. [    1.670000] usbcore: registered new interface driver cdc_acm
  140. [    1.680000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  141. [    1.680000] usbcore: registered new interface driver cdc_wdm
  142. [    1.690000] usbcore: registered new interface driver usb-storage
  143. [    1.700000] usbcore: registered new interface driver usbserial
  144. [    1.700000] usbcore: registered new interface driver usbserial_generic
  145. [    1.710000] usbserial: USB Serial support registered for generic
  146. [    1.720000] usbcore: registered new interface driver ftdi_sio
  147. [    1.720000] usbserial: USB Serial support registered for FTDI USB Serial Device
  148. [    1.730000] usbcore: registered new interface driver option
  149. [    1.730000] usbserial: USB Serial support registered for GSM modem (1-port)
  150. [    1.740000] usbcore: registered new interface driver pl2303
  151. [    1.750000] usbserial: USB Serial support registered for pl2303
  152. [    1.750000] rtc rtc0: alarm rollover not handled
  153. [    1.760000] rtc rtc0: invalid alarm value: 1900-1-1 0:0:0
  154. [    1.770000] at91_rtc f80480b0.rtc: rtc core: registered f80480b0.rtc as rtc0
  155. [    1.780000] at91_rtc f80480b0.rtc: AT91 Real Time Clock driver.
  156. [    1.780000] i2c /dev entries driver
  157. [    1.790000] AT91: Starting after wakeup
  158. [    1.800000] sama5d4_wdt f8048040.watchdog: initialized (timeout = 16 sec, nowayout = 0)
  159. [    1.810000] sdhci: Secure Digital Host Controller Interface driver
  160. [    1.810000] sdhci: Copyright(c) Pierre Ossman
  161. [    1.820000] sdhci-pltfm: SDHCI platform and OF driver helper
  162. [    1.820000] pinctrl-at91-pio4 fc038000.pinctrl: pin PA1 already requested by 80000000.nand; cannot claim for a0000000.sdio-host
  163. [    1.830000] pinctrl-at91-pio4 fc038000.pinctrl: pin-1 (a0000000.sdio-host) status -22
  164. [    1.840000] pinctrl-at91-pio4 fc038000.pinctrl: could not request pin 1 (PA1) from group PA1  on device atmel_pinctrl
  165. [    1.850000] sdhci-at91 a0000000.sdio-host: Error applying setting, reverse things back
  166. [    1.860000] sdhci-at91 a0000000.sdio-host: update clk mul to 39 as gck rate is 480000000 Hz
  167. [    1.930000] mmc0: SDHCI controller on a0000000.sdio-host [a0000000.sdio-host] using ADMA
  168. [    1.930000] pinctrl-at91-pio4 fc038000.pinctrl: pin PA21 already requested by 80000000.nand; cannot claim for b0000000.sdio-host
  169. [    1.940000] pinctrl-at91-pio4 fc038000.pinctrl: pin-21 (b0000000.sdio-host) status -22
  170. [    1.940000] pinctrl-at91-pio4 fc038000.pinctrl: could not request pin 21 (PA21) from group PA21  on device atmel_pinctrl
  171. [    1.950000] sdhci-at91 b0000000.sdio-host: Error applying setting, reverse things back
  172. [    1.960000] sdhci-at91 b0000000.sdio-host: update clk mul to 39 as gck rate is 480000000 Hz
  173. [    2.070000] mmc1: SDHCI controller on b0000000.sdio-host [b0000000.sdio-host] using ADMA
  174. [    2.080000] ledtrig-cpu: registered to indicate activity on CPUs
  175. [    2.080000] atmel_aes f002c000.aes: can't request region for resource [mem 0xf002c000-0xf002c0ff]
  176. [    2.090000] atmel_aes f002c000.aes: can't ioremap
  177. [    2.100000] atmel_aes f002c000.aes: initialization failed.
  178. [    2.100000] atmel_aes: probe of f002c000.aes failed with error -16
  179. [    2.110000] atmel_sha f0028000.sha: version: 0x510
  180. [    2.110000] atmel_sha f0028000.sha: using dma0chan3 for DMA transfers
  181. [    2.170000] atmel_sha f0028000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
  182. [    2.170000] atmel_tdes fc044000.tdes: version: 0x703
  183. [    2.180000] atmel_tdes fc044000.tdes: using dma0chan4, dma0chan5 for DMA transfers
  184. [    2.210000] atmel_tdes fc044000.tdes: Atmel DES/TDES
  185. [    2.210000] usbcore: registered new interface driver usbhid
  186. [    2.220000] usbhid: USB HID core driver
  187. [    2.240000] atmel-classd fc048000.classd: PWM modulation type is Differential, non-overlapping is enabled
  188. [    2.260000] atmel-classd fc048000.classd: atmel-classd-hifi <-> fc048000.classd mapping ok
  189. [    2.270000] atmel-pdmic f8018000.pdmic: atmel-pdmic-hifi <-> f8018000.pdmic mapping ok
  190. [    2.290000] NET: Registered protocol family 17
  191. [    2.290000] can: controller area network core (rev 20120528 abi 9)
  192. [    2.300000] NET: Registered protocol family 29
  193. [    2.300000] can: raw protocol (rev 20120528)
  194. [    2.310000] can: broadcast manager protocol (rev 20120528 t)
  195. [    2.310000] can: netlink gateway (rev 20130117) max_hops=1
  196. [    2.350000] at91_i2c f8028000.i2c: can't get DMA channel, continue without DMA support
  197. [    2.370000] at91_i2c f8028000.i2c: AT91 i2c bus driver (hw version: 0x704).
  198. [    2.390000] ubi0: default fastmap pool size: 40
  199. [    2.390000] ubi0: default fastmap WL pool size: 20
  200. [    2.400000] ubi0: attaching mtd1
  201. [    3.360000] random: nonblocking pool is initialized
  202. [    3.840000] ubi0: scanning is finished
  203. [    3.850000] ubi0 error: ubi_read_volume_table: the layout volume was not found
  204. [    3.850000] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
  205. [    3.860000] UBI error: cannot attach mtd1
  206. [    3.860000] at91_rtc f80480b0.rtc: setting system clock to 2012-01-01 00:14:41 UTC (1325376881)
  207. [    3.880000] ALSA device list:
  208. [    3.880000]   #0: CLASSD
  209. [    3.890000]   #1: PDMIC @ sama5d2_xplained
  210. [    3.890000] UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -19
  211. [    3.900000] Please append a correct "root=" boot option; here are the available partitions:
  212. [    3.910000] 0100            8192 ram0  (driver?)
  213. [    3.920000] 0101            8192 ram1  (driver?)
  214. [    3.920000] 0102            8192 ram2  (driver?)
  215. [    3.930000] 0103            8192 ram3  (driver?)
  216. [    3.930000] 1f00           17408 mtdblock0  (driver?)
  217. [    3.940000] 1f01          113664 mtdblock1  (driver?)
  218. [    3.940000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  219. [    3.940000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.24-linux4sam_5.5 #9
  220. [    3.940000] Hardware name: Atmel SAMA5
  221. [    3.940000] [<c00147e8>] (unwind_backtrace) from [<c0012610>] (show_stack+0x10/0x14)
  222. [    3.940000] [<c0012610>] (show_stack) from [<c0063ff8>] (panic+0x88/0x1e4)
  223. [    3.940000] [<c0063ff8>] (panic) from [<c06bc174>] (mount_block_root+0x1c0/0x25c)
  224. [    3.940000] [<c06bc174>] (mount_block_root) from [<c06bc4c8>] (prepare_namespace+0xa8/0x1d8)
  225. [    3.940000] [<c06bc4c8>] (prepare_namespace) from [<c06bbe10>] (kernel_init_freeable+0x1c0/0x1d0)
  226. [    3.940000] [<c06bbe10>] (kernel_init_freeable) from [<c04e5e7c>] (kernel_init+0x8/0xe8)
  227. [    3.940000] [<c04e5e7c>] (kernel_init) from [<c000f458>] (ret_from_fork+0x14/0x3c)
  228. [    3.940000] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
RAW Paste Data
Top