Public Pastes
daily pastebin goal
68%
SHARE
TWEET

Untitled

a guest Jul 28th, 2012 20 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.32-41-generic (buildd@komainu) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #91-Ubuntu SMP Wed Jun 13 11:43:55 UTC 2012 (Ubuntu 2.6.32-41.91-generic 2.6.32.59+drm33.24)
  4. [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=a024a040-ef86-4366-810e-9550d6e80d72 ro quiet splash
  5. [    0.000000] KERNEL supported cpus:
  6. [    0.000000]   Intel GenuineIntel
  7. [    0.000000]   AMD AuthenticAMD
  8. [    0.000000]   Centaur CentaurHauls
  9. [    0.000000] BIOS-provided physical RAM map:
  10. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
  11. [    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
  13. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
  14. [    0.000000]  BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
  15. [    0.000000]  BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
  16. [    0.000000]  BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
  17. [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
  18. [    0.000000]  BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
  19. [    0.000000] DMI present.
  20. [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
  21. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  22. [    0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
  23. [    0.000000] MTRR default type: uncachable
  24. [    0.000000] MTRR fixed ranges enabled:
  25. [    0.000000]   00000-9FFFF write-back
  26. [    0.000000]   A0000-EFFFF uncachable
  27. [    0.000000]   F0000-FFFFF write-protect
  28. [    0.000000] MTRR variable ranges enabled:
  29. [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
  30. [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
  31. [    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
  32. [    0.000000]   3 disabled
  33. [    0.000000]   4 disabled
  34. [    0.000000]   5 disabled
  35. [    0.000000]   6 disabled
  36. [    0.000000]   7 disabled
  37. [    0.000000] TOM2: 0000000230000000 aka 8960M
  38. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  39. [    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
  40. [    0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
  41. [    0.000000] Scanning 0 areas for low memory corruption
  42. [    0.000000] modified physical RAM map:
  43. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  44. [    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
  45. [    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
  46. [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
  47. [    0.000000]  modified: 0000000000100000 - 00000000cff90000 (usable)
  48. [    0.000000]  modified: 00000000cff90000 - 00000000cffa8000 (ACPI data)
  49. [    0.000000]  modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
  50. [    0.000000]  modified: 00000000cffd0000 - 00000000d0000000 (reserved)
  51. [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
  52. [    0.000000]  modified: 0000000100000000 - 0000000220000000 (usable)
  53. [    0.000000] initial memory mapped : 0 - 20000000
  54. [    0.000000] Using GB pages for direct mapping
  55. [    0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
  56. [    0.000000] NX (Execute Disable) protection: active
  57. [    0.000000]  0000000000 - 00c0000000 page 1G
  58. [    0.000000]  00c0000000 - 00cfe00000 page 2M
  59. [    0.000000]  00cfe00000 - 00cff90000 page 4k
  60. [    0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000
  61. [    0.000000] init_memory_mapping: 0000000100000000-0000000220000000
  62. [    0.000000] NX (Execute Disable) protection: active
  63. [    0.000000]  0100000000 - 0200000000 page 1G
  64. [    0.000000]  0200000000 - 0220000000 page 2M
  65. [    0.000000] kernel direct mapping tables up to 220000000 @ 12000-14000
  66. [    0.000000] RAMDISK: 377f4000 - 37feffd6
  67. [    0.000000] ACPI: RSDP 00000000000fbc40 00024 (v02 ACPIAM)
  68. [    0.000000] ACPI: XSDT 00000000cff90100 00064 (v01 _ASUS_ Notebook 20110718 MSFT 00000097)
  69. [    0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 071811 FACP1456 20110718 MSFT 00000097)
  70. [    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
  71. [    0.000000] ACPI: DSDT 00000000cff90450 0D386 (v01  A1822 A1822001 00000001 INTL 20060113)
  72. [    0.000000] ACPI: FACS 00000000cffa8000 00040
  73. [    0.000000] ACPI: APIC 00000000cff90390 0007C (v01 071811 APIC1456 20110718 MSFT 00000097)
  74. [    0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 071811 OEMMCFG  20110718 MSFT 00000097)
  75. [    0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 071811 OEMB1456 20110718 MSFT 00000097)
  76. [    0.000000] ACPI: SRAT 00000000cff9f450 000C8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
  77. [    0.000000] ACPI: HPET 00000000cff9f520 00038 (v01 071811 OEMHPET  20110718 MSFT 00000097)
  78. [    0.000000] ACPI: SLIC 00000000cff9f560 00176 (v01 _ASUS_ Notebook 20110718 MSFT 00000097)
  79. [    0.000000] ACPI: SSDT 00000000cff9f6e0 00458 (v01 A M I  POWERNOW 00000001 AMD  00000001)
  80. [    0.000000] ACPI: Local APIC address 0xfee00000
  81. [    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
  82. [    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
  83. [    0.000000] SRAT: Node 0 PXM 0 0-a0000
  84. [    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
  85. [    0.000000] SRAT: Node 0 PXM 0 100000000-230000000
  86. [    0.000000] NUMA: Allocated memnodemap from 13000 - 17640
  87. [    0.000000] NUMA: Using 20 for the hash shift.
  88. [    0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
  89. [    0.000000]   NODE_DATA [0000000000017640 - 000000000001c63f]
  90. [    0.000000]   bootmap [000000000001d000 -  0000000000060fff] pages 44
  91. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0220000000]
  92. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  93. [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  94. [    0.000000]   #2 [0001000000 - 0001a37ac4]    TEXT DATA BSS ==> [0001000000 - 0001a37ac4]
  95. [    0.000000]   #3 [00377f4000 - 0037feffd6]          RAMDISK ==> [00377f4000 - 0037feffd6]
  96. [    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
  97. [    0.000000]   #5 [0001a38000 - 0001a38348]              BRK ==> [0001a38000 - 0001a38348]
  98. [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  99. [    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
  100. [    0.000000]   #8 [0000013000 - 0000017640]       MEMNODEMAP ==> [0000013000 - 0000017640]
  101. [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
  102. [    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880028600000-ffff88002f3fffff] on node 0
  103. [    0.000000] Zone PFN ranges:
  104. [    0.000000]   DMA      0x00000010 -> 0x00001000
  105. [    0.000000]   DMA32    0x00001000 -> 0x00100000
  106. [    0.000000]   Normal   0x00100000 -> 0x00220000
  107. [    0.000000] Movable zone start PFN for each node
  108. [    0.000000] early_node_map[3] active PFN ranges
  109. [    0.000000]     0: 0x00000010 -> 0x0000009e
  110. [    0.000000]     0: 0x00000100 -> 0x000cff90
  111. [    0.000000]     0: 0x00100000 -> 0x00220000
  112. [    0.000000] On node 0 totalpages: 2031390
  113. [    0.000000]   DMA zone: 56 pages used for memmap
  114. [    0.000000]   DMA zone: 107 pages reserved
  115. [    0.000000]   DMA zone: 3819 pages, LIFO batch:0
  116. [    0.000000]   DMA32 zone: 14280 pages used for memmap
  117. [    0.000000]   DMA32 zone: 833480 pages, LIFO batch:31
  118. [    0.000000]   Normal zone: 16128 pages used for memmap
  119. [    0.000000]   Normal zone: 1163520 pages, LIFO batch:31
  120. [    0.000000] ACPI: PM-Timer IO Port: 0x808
  121. [    0.000000] ACPI: Local APIC address 0xfee00000
  122. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  123. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  124. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
  125. [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
  126. [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
  127. [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
  128. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  129. [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
  130. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  131. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  132. [    0.000000] ACPI: IRQ0 used by override.
  133. [    0.000000] ACPI: IRQ2 used by override.
  134. [    0.000000] ACPI: IRQ9 used by override.
  135. [    0.000000] Using ACPI (MADT) for SMP configuration information
  136. [    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
  137. [    0.000000] SMP: Allowing 6 CPUs, 4 hotplug CPUs
  138. [    0.000000] nr_irqs_gsi: 24
  139. [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
  140. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  141. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
  142. [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
  143. [    0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
  144. [    0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
  145. [    0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
  146. [    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000
  147. [    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
  148. [    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ff00000)
  149. [    0.000000] Booting paravirtualized kernel on bare hardware
  150. [    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
  151. [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91608 r8192 d23080 u262144
  152. [    0.000000] pcpu-alloc: s91608 r8192 d23080 u262144 alloc=1*2097152
  153. [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
  154. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2000819
  155. [    0.000000] Policy zone: Normal
  156. [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-41-generic root=UUID=a024a040-ef86-4366-810e-9550d6e80d72 ro quiet splash
  157. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  158. [    0.000000] Initializing CPU#0
  159. [    0.000000] Checking aperture...
  160. [    0.000000] No AGP bridge found
  161. [    0.000000] Node 0: aperture @ 20000000 size 32 MB
  162. [    0.000000] Aperture pointing to e820 RAM. Ignoring.
  163. [    0.000000] Your BIOS doesn't leave a aperture memory hole
  164. [    0.000000] Please enable the IOMMU option in the BIOS setup
  165. [    0.000000] This costs you 64 MB of RAM
  166. [    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
  167. [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
  168. [    0.000000] Memory: 7927684k/8912896k available (5438k kernel code, 787336k absent, 197876k reserved, 2987k data, 884k init)
  169. [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  170. [    0.000000] Hierarchical RCU implementation.
  171. [    0.000000] NR_IRQS:4352 nr_irqs:456
  172. [    0.000000] Extended CMOS year: 2000
  173. [    0.000000] spurious 8259A interrupt: IRQ7.
  174. [    0.000000] Console: colour VGA+ 80x25
  175. [    0.000000] console [tty0] enabled
  176. [    0.000000] allocated 81264640 bytes of page_cgroup
  177. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  178. [    0.000000] hpet clockevent registered
  179. [    0.000000] Fast TSC calibration using PIT
  180. [    0.000000] Detected 2812.653 MHz processor.
  181. [    0.020004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.29 BogoMIPS (lpj=28126490)
  182. [    0.020021] Security Framework initialized
  183. [    0.020034] AppArmor: AppArmor initialized
  184. [    0.020531] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  185. [    0.022762] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  186. [    0.023766] Mount-cache hash table entries: 256
  187. [    0.023858] Initializing cgroup subsys ns
  188. [    0.023861] Initializing cgroup subsys cpuacct
  189. [    0.023864] Initializing cgroup subsys memory
  190. [    0.023869] Initializing cgroup subsys devices
  191. [    0.023871] Initializing cgroup subsys freezer
  192. [    0.023873] Initializing cgroup subsys net_cls
  193. [    0.023887] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  194. [    0.023889] CPU: L2 Cache: 512K (64 bytes/line)
  195. [    0.023891] CPU 0/0x0 -> Node 0
  196. [    0.030006] tseg: 0000000000
  197. [    0.030017] CPU: Physical Processor ID: 0
  198. [    0.030018] CPU: Processor Core ID: 0
  199. [    0.030019] mce: CPU supports 6 MCE banks
  200. [    0.030027] Performance Events: AMD PMU driver.
  201. [    0.030030] ... version:                0
  202. [    0.030032] ... bit width:              48
  203. [    0.030033] ... generic registers:      4
  204. [    0.030034] ... value mask:             0000ffffffffffff
  205. [    0.030035] ... max period:             00007fffffffffff
  206. [    0.030036] ... fixed-purpose events:   0
  207. [    0.030038] ... event mask:             000000000000000f
  208. [    0.031267] ACPI: Core revision 20090903
  209. [    0.050006] ftrace: converting mcount calls to 0f 1f 44 00 00
  210. [    0.050009] ftrace: allocating 22588 entries in 89 pages
  211. [    0.055050] Setting APIC routing to flat
  212. [    0.055344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  213. [    0.156976] CPU0: AMD Athlon(tm) II X2 220 Processor stepping 03
  214. [    0.160000] Booting processor 1 APIC 0x1 ip 0x6000
  215. [    0.030000] Initializing CPU#1
  216. [    0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  217. [    0.030000] CPU: L2 Cache: 512K (64 bytes/line)
  218. [    0.030000] CPU 1/0x1 -> Node 0
  219. [    0.030000] CPU: Physical Processor ID: 0
  220. [    0.030000] CPU: Processor Core ID: 1
  221. [    0.310065] CPU1: AMD Athlon(tm) II X2 220 Processor stepping 03
  222. [    0.310071] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  223. [    0.320011] Brought up 2 CPUs
  224. [    0.320012] Total of 2 processors activated (11250.42 BogoMIPS).
  225. [    0.320252] CPU0 attaching sched-domain:
  226. [    0.320255]  domain 0: span 0-1 level MC
  227. [    0.320257]   groups: 0 1
  228. [    0.320261] CPU1 attaching sched-domain:
  229. [    0.320262]  domain 0: span 0-1 level MC
  230. [    0.320264]   groups: 1 0
  231. [    0.320324] devtmpfs: initialized
  232. [    0.320324] regulator: core version 0.5
  233. [    0.320324] Time:  0:53:39  Date: 07/28/12
  234. [    0.320324] NET: Registered protocol family 16
  235. [    0.320324] node 0 link 0: io port [1000, ffffff]
  236. [    0.320324] TOM: 00000000d0000000 aka 3328M
  237. [    0.320324] Fam 10h mmconf [e0000000, efffffff]
  238. [    0.320324] node 0 link 0: mmio [a0000, bffff]
  239. [    0.320324] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
  240. [    0.320324] node 0 link 0: mmio [f0000000, fe8fffff]
  241. [    0.320324] node 0 link 0: mmio [fe900000, feafffff]
  242. [    0.320324] node 0 link 0: mmio [feb00000, ffefffff]
  243. [    0.320324] TOM2: 0000000230000000 aka 8960M
  244. [    0.320324] bus: [00,07] on node 0 link 0
  245. [    0.320324] bus: 00 index 0 io port: [0, ffff]
  246. [    0.320324] bus: 00 index 1 mmio: [a0000, bffff]
  247. [    0.320324] bus: 00 index 2 mmio: [d0000000, dfffffff]
  248. [    0.320324] bus: 00 index 3 mmio: [f0000000, ffffffff]
  249. [    0.320324] bus: 00 index 4 mmio: [230000000, fcffffffff]
  250. [    0.320324] ACPI: bus type pci registered
  251. [    0.320324] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  252. [    0.320324] PCI: Not using MMCONFIG.
  253. [    0.320324] PCI: Using configuration type 1 for base access
  254. [    0.320324] PCI: Using configuration type 1 for extended access
  255. [    0.320720] Trying to unpack rootfs image as initramfs...
  256. [    0.330048] bio: create slab <bio-0> at 0
  257. [    0.350828] ACPI: EC: Look up EC in DSDT
  258. [    0.351836] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
  259. [    0.351841] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a16080), AE_NOT_FOUND
  260. [    0.351929] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
  261. [    0.351932] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
  262. [    0.351936] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a16080), AE_ALREADY_EXISTS
  263. [    0.351939] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
  264. [    0.351992] ACPI: Executed 3 blocks of module-level executable AML code
  265. [    0.432415] ACPI: Interpreter enabled
  266. [    0.432420] ACPI: (supports S0 S1 S3 S4 S5)
  267. [    0.432442] ACPI: Using IOAPIC for interrupt routing
  268. [    0.432498] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  269. [    0.434538] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
  270. [    0.440309] PCI: Using MMCONFIG at e0000000 - efffffff
  271. [    0.445503] ACPI: No dock devices found.
  272. [    0.445643] ACPI: PCI Root Bridge [PCI0] (0000:00)
  273. [    0.445775] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
  274. [    0.445777] pci 0000:00:0a.0: PME# disabled
  275. [    0.445823] pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007]
  276. [    0.445829] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003]
  277. [    0.445835] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007]
  278. [    0.445841] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003]
  279. [    0.445846] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f]
  280. [    0.445852] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff]
  281. [    0.445868] pci 0000:00:11.0: set SATA to AHCI mode
  282. [    0.445925] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff]
  283. [    0.445977] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff]
  284. [    0.446044] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe8ff800-0xfe8ff8ff]
  285. [    0.446105] pci 0000:00:12.2: supports D1 D2
  286. [    0.446106] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
  287. [    0.446110] pci 0000:00:12.2: PME# disabled
  288. [    0.446138] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff]
  289. [    0.446190] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff]
  290. [    0.446257] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8ff400-0xfe8ff4ff]
  291. [    0.446318] pci 0000:00:13.2: supports D1 D2
  292. [    0.446319] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
  293. [    0.446323] pci 0000:00:13.2: PME# disabled
  294. [    0.446436] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
  295. [    0.446442] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
  296. [    0.446448] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
  297. [    0.446453] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
  298. [    0.446459] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
  299. [    0.446530] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
  300. [    0.446577] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
  301. [    0.446580] pci 0000:00:14.2: PME# disabled
  302. [    0.446680] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe8fa000-0xfe8fafff]
  303. [    0.446806] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
  304. [    0.446809] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff]
  305. [    0.446812] pci 0000:01:05.0: reg 18 32bit mmio: [0xfeaf0000-0xfeafffff]
  306. [    0.446818] pci 0000:01:05.0: reg 24 32bit mmio: [0xfe900000-0xfe9fffff]
  307. [    0.446832] pci 0000:01:05.0: supports D1 D2
  308. [    0.446847] pci 0000:01:05.1: reg 10 32bit mmio: [0xfeae8000-0xfeaebfff]
  309. [    0.446869] pci 0000:01:05.1: supports D1 D2
  310. [    0.446904] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
  311. [    0.446907] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
  312. [    0.446909] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
  313. [    0.446940] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]
  314. [    0.446953] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff]
  315. [    0.446962] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff]
  316. [    0.446968] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebf0000-0xfebfffff]
  317. [    0.447011] pci 0000:02:00.0: supports D1 D2
  318. [    0.447013] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  319. [    0.447016] pci 0000:02:00.0: PME# disabled
  320. [    0.447069] pci 0000:00:0a.0: bridge io port: [0xe000-0xefff]
  321. [    0.447071] pci 0000:00:0a.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
  322. [    0.447074] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
  323. [    0.447127] pci 0000:00:14.4: transparent bridge
  324. [    0.447146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  325. [    0.447322] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  326. [    0.447388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
  327. [    0.447451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
  328. [    0.451419] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
  329. [    0.451518] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
  330. [    0.451618] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
  331. [    0.451716] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
  332. [    0.451813] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
  333. [    0.451911] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
  334. [    0.452008] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
  335. [    0.452105] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
  336. [    0.452201] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
  337. [    0.452204] vgaarb: loaded
  338. [    0.452277] SCSI subsystem initialized
  339. [    0.452348] libata version 3.00 loaded.
  340. [    0.452393] usbcore: registered new interface driver usbfs
  341. [    0.452402] usbcore: registered new interface driver hub
  342. [    0.452417] usbcore: registered new device driver usb
  343. [    0.452538] ACPI: WMI: Mapper loaded
  344. [    0.452540] PCI: Using ACPI for IRQ routing
  345. [    0.452656] NetLabel: Initializing
  346. [    0.452657] NetLabel:  domain hash size = 128
  347. [    0.452658] NetLabel:  protocols = UNLABELED CIPSOv4
  348. [    0.452667] NetLabel:  unlabeled traffic allowed by default
  349. [    0.452698] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  350. [    0.452702] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
  351. [    0.454728] Switching to clocksource tsc
  352. [    0.454832] AppArmor: AppArmor Filesystem Enabled
  353. [    0.454832] pnp: PnP ACPI init
  354. [    0.454832] ACPI: bus type pnp registered
  355. [    0.454832] pnp: PnP ACPI: found 12 devices
  356. [    0.454832] ACPI: ACPI bus type pnp unregistered
  357. [    0.454832] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
  358. [    0.454832] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
  359. [    0.454832] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  360. [    0.454832] system 00:08: ioport range 0x40b-0x40b has been reserved
  361. [    0.454832] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
  362. [    0.454832] system 00:08: ioport range 0xc00-0xc01 has been reserved
  363. [    0.454832] system 00:08: ioport range 0xc14-0xc14 has been reserved
  364. [    0.454832] system 00:08: ioport range 0xc50-0xc51 has been reserved
  365. [    0.454832] system 00:08: ioport range 0xc52-0xc52 has been reserved
  366. [    0.454832] system 00:08: ioport range 0xc6c-0xc6c has been reserved
  367. [    0.454832] system 00:08: ioport range 0xc6f-0xc6f has been reserved
  368. [    0.454832] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
  369. [    0.454832] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
  370. [    0.454832] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
  371. [    0.454832] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
  372. [    0.454832] system 00:08: ioport range 0xcd8-0xcdf has been reserved
  373. [    0.454832] system 00:08: ioport range 0xb00-0xb3f has been reserved
  374. [    0.454832] system 00:08: ioport range 0x800-0x89f has been reserved
  375. [    0.454832] system 00:08: ioport range 0xb00-0xb0f has been reserved
  376. [    0.454832] system 00:08: ioport range 0xb20-0xb3f has been reserved
  377. [    0.454832] system 00:08: ioport range 0x900-0x90f has been reserved
  378. [    0.454832] system 00:08: ioport range 0x910-0x91f has been reserved
  379. [    0.454832] system 00:08: ioport range 0xfe00-0xfefe has been reserved
  380. [    0.454832] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
  381. [    0.454832] system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved
  382. [    0.454832] system 00:08: iomem range 0xfed40000-0xfed44fff has been reserved
  383. [    0.454832] system 00:09: ioport range 0x230-0x23f has been reserved
  384. [    0.454832] system 00:09: ioport range 0x290-0x29f has been reserved
  385. [    0.454832] system 00:09: ioport range 0x300-0x30f has been reserved
  386. [    0.454832] system 00:09: ioport range 0xa30-0xa3f has been reserved
  387. [    0.454832] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
  388. [    0.454832] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
  389. [    0.454832] system 00:0b: iomem range 0xc0000-0xcffff has been reserved
  390. [    0.454832] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
  391. [    0.454832] system 00:0b: iomem range 0x100000-0xcfffffff could not be reserved
  392. [    0.454832] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
  393. [    0.457719] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  394. [    0.457722] pci 0000:00:01.0:   IO window: 0xd000-0xdfff
  395. [    0.457724] pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
  396. [    0.457726] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
  397. [    0.457730] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
  398. [    0.457732] pci 0000:00:0a.0:   IO window: 0xe000-0xefff
  399. [    0.457734] pci 0000:00:0a.0:   MEM window: 0xfeb00000-0xfebfffff
  400. [    0.457736] pci 0000:00:0a.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
  401. [    0.457739] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
  402. [    0.457740] pci 0000:00:14.4:   IO window: disabled
  403. [    0.457745] pci 0000:00:14.4:   MEM window: disabled
  404. [    0.457748] pci 0000:00:14.4:   PREFETCH window: disabled
  405. [    0.457761]   alloc irq_desc for 18 on node 0
  406. [    0.457762]   alloc kstat_irqs on node 0
  407. [    0.457767] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  408. [    0.457769] pci 0000:00:0a.0: setting latency timer to 64
  409. [    0.457776] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  410. [    0.457777] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
  411. [    0.457779] pci_bus 0000:01: resource 0 io:  [0xd000-0xdfff]
  412. [    0.457781] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfeafffff]
  413. [    0.457783] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
  414. [    0.457785] pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
  415. [    0.457786] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
  416. [    0.457788] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
  417. [    0.457790] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
  418. [    0.457791] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
  419. [    0.457818] NET: Registered protocol family 2
  420. [    0.457997] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
  421. [    0.459072] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  422. [    0.461246] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  423. [    0.461512] TCP: Hash tables configured (established 524288 bind 65536)
  424. [    0.461514] TCP reno registered
  425. [    0.461595] NET: Registered protocol family 1
  426. [    0.461619]   alloc irq_desc for 16 on node 0
  427. [    0.461621]   alloc kstat_irqs on node 0
  428. [    0.461627] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  429. [    1.118047] Freeing initrd memory: 8175k freed
  430. [    1.135194] pci 0000:00:12.0: PCI INT A disabled
  431. [    1.135208] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  432. [    1.165199] pci 0000:00:12.1: PCI INT A disabled
  433. [    1.165215]   alloc irq_desc for 17 on node 0
  434. [    1.165217]   alloc kstat_irqs on node 0
  435. [    1.165222] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  436. [    1.165252] pci 0000:00:12.2: PCI INT B disabled
  437. [    1.165257] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  438. [    1.195187] pci 0000:00:13.0: PCI INT A disabled
  439. [    1.195200] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  440. [    1.225189] pci 0000:00:13.1: PCI INT A disabled
  441. [    1.225206]   alloc irq_desc for 19 on node 0
  442. [    1.225207]   alloc kstat_irqs on node 0
  443. [    1.225212] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  444. [    1.225245] pci 0000:00:13.2: PCI INT B disabled
  445. [    1.225254] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  446. [    1.255184] pci 0000:00:14.5: PCI INT C disabled
  447. [    1.255199] pci 0000:01:05.0: Boot video device
  448. [    1.255850] PCI-DMA: Disabling AGP.
  449. [    1.255922] PCI-DMA: aperture base @ 20000000 size 65536 KB
  450. [    1.255923] PCI-DMA: using GART IOMMU.
  451. [    1.255926] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
  452. [    1.257009] Scanning for low memory corruption every 60 seconds
  453. [    1.257094] audit: initializing netlink socket (disabled)
  454. [    1.257107] type=2000 audit(1343436820.255:1): initialized
  455. [    1.263719] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  456. [    1.264671] VFS: Disk quotas dquot_6.5.2
  457. [    1.264713] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  458. [    1.265173] fuse init (API version 7.13)
  459. [    1.265265] msgmni has been set to 15499
  460. [    1.265473] alg: No test for stdrng (krng)
  461. [    1.265542] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  462. [    1.265545] io scheduler noop registered
  463. [    1.265546] io scheduler anticipatory registered
  464. [    1.265548] io scheduler deadline registered
  465. [    1.265587] io scheduler cfq registered (default)
  466. [    1.265769]   alloc irq_desc for 24 on node 0
  467. [    1.265770]   alloc kstat_irqs on node 0
  468. [    1.265776] pcieport 0000:00:0a.0: irq 24 for MSI/MSI-X
  469. [    1.265780] pcieport 0000:00:0a.0: setting latency timer to 64
  470. [    1.265863] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  471. [    1.265881] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  472. [    1.265958] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  473. [    1.265961] ACPI: Power Button [PWRB]
  474. [    1.265993] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  475. [    1.265994] ACPI: Power Button [PWRF]
  476. [    1.266484] processor LNXCPU:00: registered as cooling_device0
  477. [    1.266684] processor LNXCPU:01: registered as cooling_device1
  478. [    1.268650] Linux agpgart interface v0.103
  479. [    1.268679] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  480. [    1.269432] brd: module loaded
  481. [    1.269712] loop: module loaded
  482. [    1.269776] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  483. [    1.269942] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  484. [    1.269966] pata_acpi 0000:00:14.1: setting latency timer to 64
  485. [    1.270247] Fixed MDIO Bus: probed
  486. [    1.270268] PPP generic driver version 2.4.2
  487. [    1.270307] tun: Universal TUN/TAP device driver, 1.6
  488. [    1.270309] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  489. [    1.270368] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  490. [    1.270430] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  491. [    1.270456] ehci_hcd 0000:00:12.2: EHCI Host Controller
  492. [    1.270516] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
  493. [    1.270547] ehci_hcd 0000:00:12.2: debug port 1
  494. [    1.270567] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
  495. [    1.285202] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
  496. [    1.285299] usb usb1: configuration #1 chosen from 1 choice
  497. [    1.285320] hub 1-0:1.0: USB hub found
  498. [    1.285326] hub 1-0:1.0: 6 ports detected
  499. [    1.285429] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  500. [    1.285448] ehci_hcd 0000:00:13.2: EHCI Host Controller
  501. [    1.285475] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
  502. [    1.285502] ehci_hcd 0000:00:13.2: debug port 1
  503. [    1.285521] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
  504. [    1.305174] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
  505. [    1.305267] usb usb2: configuration #1 chosen from 1 choice
  506. [    1.305285] hub 2-0:1.0: USB hub found
  507. [    1.305291] hub 2-0:1.0: 6 ports detected
  508. [    1.305376] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  509. [    1.305439] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  510. [    1.305461] ohci_hcd 0000:00:12.0: OHCI Host Controller
  511. [    1.305494] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
  512. [    1.305522] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
  513. [    1.369277] usb usb3: configuration #1 chosen from 1 choice
  514. [    1.369296] hub 3-0:1.0: USB hub found
  515. [    1.369304] hub 3-0:1.0: 3 ports detected
  516. [    1.369405] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  517. [    1.369425] ohci_hcd 0000:00:12.1: OHCI Host Controller
  518. [    1.369452] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
  519. [    1.369469] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
  520. [    1.429273] usb usb4: configuration #1 chosen from 1 choice
  521. [    1.429292] hub 4-0:1.0: USB hub found
  522. [    1.429301] hub 4-0:1.0: 3 ports detected
  523. [    1.429401] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  524. [    1.429421] ohci_hcd 0000:00:13.0: OHCI Host Controller
  525. [    1.429448] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
  526. [    1.429472] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
  527. [    1.489281] usb usb5: configuration #1 chosen from 1 choice
  528. [    1.489300] hub 5-0:1.0: USB hub found
  529. [    1.489308] hub 5-0:1.0: 3 ports detected
  530. [    1.489407] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  531. [    1.489427] ohci_hcd 0000:00:13.1: OHCI Host Controller
  532. [    1.489461] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
  533. [    1.489481] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000
  534. [    1.549265] usb usb6: configuration #1 chosen from 1 choice
  535. [    1.549288] hub 6-0:1.0: USB hub found
  536. [    1.549296] hub 6-0:1.0: 3 ports detected
  537. [    1.549403] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  538. [    1.549423] ohci_hcd 0000:00:14.5: OHCI Host Controller
  539. [    1.549454] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
  540. [    1.549472] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000
  541. [    1.605241] usb 1-1: new high speed USB device using ehci_hcd and address 2
  542. [    1.609267] usb usb7: configuration #1 chosen from 1 choice
  543. [    1.609285] hub 7-0:1.0: USB hub found
  544. [    1.609294] hub 7-0:1.0: 2 ports detected
  545. [    1.609363] uhci_hcd: USB Universal Host Controller Interface driver
  546. [    1.609424] PNP: No PS/2 controller found. Probing ports directly.
  547. [    1.609769] serio: i8042 KBD port at 0x60,0x64 irq 1
  548. [    1.609778] serio: i8042 AUX port at 0x60,0x64 irq 12
  549. [    1.609855] mice: PS/2 mouse device common for all mice
  550. [    1.609919] rtc_cmos 00:03: RTC can wake from S4
  551. [    1.609956] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  552. [    1.609978] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  553. [    1.610058] device-mapper: uevent: version 1.0.3
  554. [    1.610149] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  555. [    1.610249] device-mapper: multipath: version 1.1.0 loaded
  556. [    1.610251] device-mapper: multipath round-robin: version 1.0.0 loaded
  557. [    1.610441] cpuidle: using governor ladder
  558. [    1.610443] cpuidle: using governor menu
  559. [    1.610693] TCP cubic registered
  560. [    1.610790] NET: Registered protocol family 10
  561. [    1.611306] NET: Registered protocol family 17
  562. [    1.611341] powernow-k8: Found 1 AMD Athlon(tm) II X2 220 Processor processors (2 cpu cores) (version 2.20.00)
  563. [    1.611377] powernow-k8:    0 : pstate 0 (2800 MHz)
  564. [    1.611379] powernow-k8:    1 : pstate 1 (2100 MHz)
  565. [    1.611380] powernow-k8:    2 : pstate 2 (1600 MHz)
  566. [    1.611381] powernow-k8:    3 : pstate 3 (800 MHz)
  567. [    1.611810] PM: Resume from disk failed.
  568. [    1.611819] registered taskstats version 1
  569. [    1.612057]   Magic number: 4:446:861
  570. [    1.612132] rtc_cmos 00:03: setting system clock to 2012-07-28 00:53:41 UTC (1343436821)
  571. [    1.612134] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  572. [    1.612135] EDD information not available.
  573. [    1.612180] Freeing unused kernel memory: 884k freed
  574. [    1.612375] Write protecting the kernel read-only data: 7720k
  575. [    1.627606] udev: starting version 151
  576. [    1.678559] ahci 0000:00:11.0: version 3.0
  577. [    1.678575]   alloc irq_desc for 22 on node 0
  578. [    1.678576]   alloc kstat_irqs on node 0
  579. [    1.678582] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  580. [    1.678692] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  581. [    1.678695] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
  582. [    1.685612] scsi0 : ahci
  583. [    1.699239] scsi1 : ahci
  584. [    1.711774] scsi2 : ahci
  585. [    1.723048] scsi3 : ahci
  586. [    1.723109] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
  587. [    1.723113] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
  588. [    1.723116] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
  589. [    1.723119] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
  590. [    1.723329] scsi4 : pata_atiixp
  591. [    1.723372] scsi5 : pata_atiixp
  592. [    1.724086] usb 1-1: configuration #1 chosen from 1 choice
  593. [    1.724428] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
  594. [    1.724430] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
  595. [    1.734212] Initializing USB Mass Storage driver...
  596. [    1.734321] scsi6 : SCSI emulation for USB Mass Storage devices
  597. [    1.734377] usb-storage: device found at 2
  598. [    1.734379] usb-storage: waiting for device to settle before scanning
  599. [    1.734384] usbcore: registered new interface driver usb-storage
  600. [    1.734386] USB Mass Storage support registered.
  601. [    1.850037] usb 1-2: new high speed USB device using ehci_hcd and address 3
  602. [    2.002307] usb 1-2: configuration #1 chosen from 1 choice
  603. [    2.002629] scsi7 : SCSI emulation for USB Mass Storage devices
  604. [    2.002713] usb-storage: device found at 3
  605. [    2.002716] usb-storage: waiting for device to settle before scanning
  606. [    2.070904] ata4: SATA link down (SStatus 0 SControl 300)
  607. [    2.080049] ata2: SATA link down (SStatus 0 SControl 300)
  608. [    2.120038] usb 2-3: new high speed USB device using ehci_hcd and address 2
  609. [    2.250885] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  610. [    2.273844] usb 2-3: configuration #1 chosen from 1 choice
  611. [    2.274171] scsi8 : SCSI emulation for USB Mass Storage devices
  612. [    2.274273] usb-storage: device found at 2
  613. [    2.274274] usb-storage: waiting for device to settle before scanning
  614. [    2.279296] ata3.00: ATA-8: TOSHIBA MK7559GSXP, GN003J, max UDMA/100
  615. [    2.279299] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  616. [    2.280190] ata3.00: configured for UDMA/100
  617. [    2.370881] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  618. [    2.374219] ata1.00: ATA-6: ST380013AS, 3.20, max UDMA/100
  619. [    2.374222] ata1.00: 156301488 sectors, multi 16: LBA48
  620. [    2.377594] ata1.00: configured for UDMA/100
  621. [    2.391011] scsi 0:0:0:0: Direct-Access     ATA      ST380013AS       3.20 PQ: 0 ANSI: 5
  622. [    2.391144] sd 0:0:0:0: Attached scsi generic sg0 type 0
  623. [    2.391240] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK7559GS GN00 PQ: 0 ANSI: 5
  624. [    2.391257] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  625. [    2.391287] sd 0:0:0:0: [sda] Write Protect is off
  626. [    2.391289] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  627. [    2.391319] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  628. [    2.391321] sd 2:0:0:0: [sdb] 4096-byte physical blocks
  629. [    2.391323] sd 2:0:0:0: Attached scsi generic sg1 type 0
  630. [    2.391352] sd 2:0:0:0: [sdb] Write Protect is off
  631. [    2.391354] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  632. [    2.391368] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  633. [    2.391485]  sdb:
  634. [    2.391511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  635. [    2.391590]  sda: sda1 sda2 < sda5 >
  636. [    2.419537] sd 0:0:0:0: [sda] Attached SCSI disk
  637. [    2.440014]  sdb2
  638. [    2.440204] sd 2:0:0:0: [sdb] Attached SCSI disk
  639. [    2.580369] ata6.01: ATAPI: ATAPI   DVD A  DH24ABS, AAA1, max UDMA/100
  640. [    2.620382] ata6.01: configured for UDMA/100
  641. [    2.622317] scsi 5:0:1:0: CD-ROM            ATAPI    DVD A  DH24ABS   AAA1 PQ: 0 ANSI: 5
  642. [    2.628513] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  643. [    2.628516] Uniform CD-ROM driver Revision: 3.20
  644. [    2.628624] sr 5:0:1:0: Attached scsi CD-ROM sr0
  645. [    2.628670] sr 5:0:1:0: Attached scsi generic sg2 type 5
  646. [    2.710035] usb 6-2: new full speed USB device using ohci_hcd and address 2
  647. [    2.872289] EXT4-fs (sda1): mounted filesystem with ordered data mode
  648. [    2.908161] usb 6-2: configuration #1 chosen from 1 choice
  649. [    4.790411] Adding 3227640k swap on /dev/sda5.  Priority:-1 extents:1 across:3227640k
  650. [    5.196591] udev: starting version 151
  651. [    5.996729] type=1505 audit(1343454825.877:2):  operation="profile_load" pid=667 name="/sbin/dhclient3"
  652. [    5.996935] type=1505 audit(1343454825.877:3):  operation="profile_load" pid=667 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  653. [    5.997052] type=1505 audit(1343454825.877:4):  operation="profile_load" pid=667 name="/usr/lib/connman/scripts/dhclient-script"
  654. [    6.464756] lp: driver loaded but no devices found
  655. [    6.681546] kjournald starting.  Commit interval 5 seconds
  656. [    6.681901] EXT3 FS on sdb2, internal journal
  657. [    6.681906] EXT3-fs: mounted filesystem with ordered data mode.
  658. [    6.732321] usb-storage: device scan complete
  659. [    6.733684] scsi 6:0:0:0: Direct-Access     Seagate  FreeAgent Go     100F PQ: 0 ANSI: 4
  660. [    6.734327] sd 6:0:0:0: Attached scsi generic sg3 type 0
  661. [    6.736678] sd 6:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  662. [    6.738177] sd 6:0:0:0: [sdc] Write Protect is off
  663. [    6.738181] sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00
  664. [    6.738183] sd 6:0:0:0: [sdc] Assuming drive cache: write through
  665. [    6.741927] sd 6:0:0:0: [sdc] Assuming drive cache: write through
  666. [    6.741962]  sdc:
  667. [    6.831411] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0x000b00-0x000b0f]
  668. [    6.831414] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  669. [    6.889648]  sdc1
  670. [    6.893267] sd 6:0:0:0: [sdc] Assuming drive cache: write through
  671. [    6.893302] sd 6:0:0:0: [sdc] Attached SCSI disk
  672. [    7.001025] usb-storage: device scan complete
  673. [    7.003137] scsi 7:0:0:0: Direct-Access     WD       My Passport 071A 2011 PQ: 0 ANSI: 4
  674. [    7.005261] scsi 7:0:0:1: Enclosure         WD       SES Device       2011 PQ: 0 ANSI: 4
  675. [    7.006573] sd 7:0:0:0: Attached scsi generic sg4 type 0
  676. [    7.007235] scsi 7:0:0:1: Attached scsi generic sg5 type 13
  677. [    7.008163] sd 7:0:0:0: [sdd] 1953468416 512-byte logical blocks: (1.00 TB/931 GiB)
  678. [    7.010256] sd 7:0:0:0: [sdd] Write Protect is off
  679. [    7.010260] sd 7:0:0:0: [sdd] Mode Sense: 2b 00 10 08
  680. [    7.010261] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  681. [    7.013285] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  682. [    7.013318]  sdd:
  683. [    7.270312] usb-storage: device scan complete
  684. [    7.270909] scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
  685. [    7.271546] scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
  686. [    7.272171] scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
  687. [    7.272795] scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
  688. [    7.273451] sd 8:0:0:0: Attached scsi generic sg6 type 0
  689. [    7.274909] sd 8:0:0:1: Attached scsi generic sg7 type 0
  690. [    7.275625] sd 8:0:0:2: Attached scsi generic sg8 type 0
  691. [    7.279740] sd 8:0:0:0: [sde] Attached SCSI removable disk
  692. [    7.281599] sd 8:0:0:3: Attached scsi generic sg9 type 0
  693. [    7.282756] sd 8:0:0:1: [sdf] Attached SCSI removable disk
  694. [    7.437626] r8168 Gigabit Ethernet driver 8.028.00-NAPI loaded
  695. [    7.437650] r8168 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  696. [    7.437667] r8168 0000:02:00.0: setting latency timer to 64
  697. [    7.437719]   alloc irq_desc for 25 on node 0
  698. [    7.437721]   alloc kstat_irqs on node 0
  699. [    7.437730] r8168 0000:02:00.0: irq 25 for MSI/MSI-X
  700. [    7.437953] eth%d: RTL8168D/8111D at 0xffffc90000c76000, 54:04:a6:f4:b0:b8, IRQ 25
  701. [    7.444344] EDAC MC: Ver: 2.1.0 Jun 13 2012
  702. [    7.458614] usbcore: registered new interface driver hiddev
  703. [    7.461060] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/input/input3
  704. [    7.461132] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2/input0
  705. [    7.466179] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/input/input4
  706. [    7.466290] generic-usb 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2/input1
  707. [    7.474978] generic-usb 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.1-2/input2
  708. [    7.475002] usbcore: registered new interface driver usbhid
  709. [    7.475004] usbhid: v2.6:USB HID core driver
  710. [    7.505645] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
  711. [    7.505648] eth0: Identified chip type is 'RTL8168D/8111D'.
  712. [    7.505650] r8168  Copyright (C) 2011  Realtek NIC software team <nicfae@realtek.com>
  713. [    7.505651]  This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
  714. [    7.505652]  This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
  715. [    7.505726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  716. [    7.835666] kjournald starting.  Commit interval 5 seconds
  717. [    7.835685] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  718. [    7.836229] EXT3 FS on sdc1, internal journal
  719. [    7.836235] EXT3-fs: mounted filesystem with ordered data mode.
  720. [   10.458529]  sdd1
  721. [   10.462652] sd 7:0:0:0: [sdd] Assuming drive cache: write through
  722. [   10.462686] sd 7:0:0:0: [sdd] Attached SCSI disk
  723. [   10.715771] kjournald starting.  Commit interval 5 seconds
  724. [   10.715779] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
  725. [   10.716474] EXT3 FS on sdd1, internal journal
  726. [   10.716480] EXT3-fs: mounted filesystem with ordered data mode.
  727. [   12.312640] type=1505 audit(1343454832.197:5):  operation="profile_replace" pid=968 name="/sbin/dhclient3"
  728. [   12.312857] type=1505 audit(1343454832.197:6):  operation="profile_replace" pid=968 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
  729. [   12.312978] type=1505 audit(1343454832.197:7):  operation="profile_replace" pid=968 name="/usr/lib/connman/scripts/dhclient-script"
  730. [   12.427871] type=1505 audit(1343454832.307:8):  operation="profile_load" pid=967 name="/usr/share/gdm/guest-session/Xsession"
  731. [   12.562920] type=1505 audit(1343454832.447:9):  operation="profile_load" pid=972 name="/usr/lib/cups/backend/cups-pdf"
  732. [   12.563201] type=1505 audit(1343454832.447:10):  operation="profile_load" pid=972 name="/usr/sbin/cupsd"
  733. [   12.703987] type=1505 audit(1343454832.587:11):  operation="profile_load" pid=969 name="/usr/bin/evince"
  734. [   12.706594] type=1505 audit(1343454832.587:12):  operation="profile_load" pid=969 name="/usr/bin/evince-previewer"
  735. [   12.708231] type=1505 audit(1343454832.587:13):  operation="profile_load" pid=969 name="/usr/bin/evince-thumbnailer"
  736. [   12.719824] type=1505 audit(1343454832.597:14):  operation="profile_load" pid=976 name="/usr/sbin/tcpdump"
  737. [   12.802059] r8168: eth0: link down
  738. [   12.802740] ADDRCONF(NETDEV_UP): eth0: link is not ready
  739. [   14.469025] r8168: eth0: link up
  740. [   14.469632] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  741. [   14.800866] r8168: eth0: link up
  742. [   23.285448] ppdev: user-space parallel port driver
  743. [   24.510852] eth0: no IPv6 routers present
  744. [   38.160874] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  745. [   38.319946] sd 8:0:0:3: [sdh] Attached SCSI removable disk
  746. [   38.323590] sd 8:0:0:2: [sdg] Attached SCSI removable disk
  747. [   38.332289] EDAC amd64_edac:  Ver: 3.2.0 Jun 13 2012
  748. [   38.336631] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
  749. [   38.336639] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
  750. [   38.336640]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
  751. [   38.336641]  (Note that use of the override may cause unknown side effects.)
  752. [   38.336655] amd64_edac: probe of 0000:00:18.2 failed with error -22
  753. [   38.387387] [drm] Initialized drm 1.1.0 20060810
  754. [   38.571746] ses 7:0:0:1: Attached Enclosure device
  755. [   38.816827] [drm] radeon defaulting to kernel modesetting.
  756. [   38.816830] [drm] radeon kernel modesetting enabled.
  757. [   38.817064] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  758. [   38.817069] radeon 0000:01:05.0: setting latency timer to 64
  759. [   38.818471] [drm] radeon: Initializing kernel modesetting.
  760. [   38.818575] [drm] register mmio base: 0xFEAF0000
  761. [   38.818576] [drm] register mmio size: 65536
  762. [   38.819124] ATOM BIOS: B27722_RS780C
  763. [   38.819133] [drm] Clocks initialized !
  764. [   38.819259] [drm] Detected VRAM RAM=256M, BAR=256M
  765. [   38.819262] [drm] RAM width 32bits DDR
  766. [   38.819342] [TTM] Zone  kernel: Available graphics memory: 3968372 kiB.
  767. [   38.819343] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
  768. [   38.819357] [drm] radeon: 256M of VRAM memory ready
  769. [   38.819359] [drm] radeon: 512M of GTT memory ready.
  770. [   38.819387] [drm] radeon: irq initialized.
  771. [   38.819390] [drm] GART: num cpu pages 131072, num gpu pages 131072
  772. [   38.819885] [drm] Loading RS780 Microcode
  773. [   38.819889] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
  774. [   39.107326] platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
  775. [   39.237830] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
  776. [   39.521883] [drm] ring test succeeded in 1 usecs
  777. [   39.521953] [drm] radeon: ib pool ready.
  778. [   39.522005] [drm] ib test succeeded in 0 usecs
  779. [   39.522007] [drm] Enabling audio support
  780. [   39.522368] [drm] Radeon Display Connectors
  781. [   39.522370] [drm] Connector 0:
  782. [   39.522371] [drm]   VGA
  783. [   39.522373] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
  784. [   39.522374] [drm]   Encoders:
  785. [   39.522375] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
  786. [   39.522376] [drm] Connector 1:
  787. [   39.522377] [drm]   DVI-D
  788. [   39.522378] [drm]   HPD1
  789. [   39.522379] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
  790. [   39.522380] [drm]   Encoders:
  791. [   39.522381] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
  792. [   39.639468] [drm] fb mappable at 0xD0141000
  793. [   39.639471] [drm] vram apper at 0xD0000000
  794. [   39.639472] [drm] size 4325376
  795. [   39.639473] [drm] fb depth is 24
  796. [   39.639474] [drm]    pitch is 5632
  797. [   39.639548] fb0: radeondrmfb frame buffer device
  798. [   39.639549] registered panic notifier
  799. [   39.639553] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0
  800. [   39.688199] vga16fb: initializing
  801. [   39.688202] vga16fb: mapped to 0xffff8800000a0000
  802. [   39.688207] vga16fb: not registering due to another framebuffer present
  803. [   39.990329] Console: switching to colour frame buffer device 170x48
  804. [   40.234914] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  805. [   40.556645] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  806. [   40.556688] HDA Intel 0000:01:05.1: setting latency timer to 64
  807. [   46.331784] CPU0 attaching NULL sched-domain.
  808. [   46.331789] CPU1 attaching NULL sched-domain.
  809. [   46.390077] CPU0 attaching sched-domain:
  810. [   46.390081]  domain 0: span 0-1 level MC
  811. [   46.390083]   groups: 0 1
  812. [   46.390087] CPU1 attaching sched-domain:
  813. [   46.390088]  domain 0: span 0-1 level MC
  814. [   46.390090]   groups: 1 0
  815. [   56.522669] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
  816. [   57.870184] CPU0 attaching NULL sched-domain.
  817. [   57.870189] CPU1 attaching NULL sched-domain.
  818. [   57.930085] CPU0 attaching sched-domain:
  819. [   57.930089]  domain 0: span 0-1 level MC
  820. [   57.930091]   groups: 0 1
  821. [   57.930095] CPU1 attaching sched-domain:
  822. [   57.930096]  domain 0: span 0-1 level MC
  823. [   57.930098]   groups: 1 0
  824. [   98.130046] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  825. [  107.086120] r8168: eth0: link down
  826. [  107.086983] ADDRCONF(NETDEV_UP): eth0: link is not ready
  827. [  107.201911] r8168: eth0: link down
  828. [  107.202773] ADDRCONF(NETDEV_UP): eth0: link is not ready
  829. [  108.200031] r8168: eth0: link down
  830. [  108.826983] r8168: eth0: link up
  831. [  108.828867] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  832. [  109.200053] r8168: eth0: link up
  833. [  119.220025] eth0: no IPv6 routers present
  834. [  129.130083] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  835. [  147.791302] r8168: eth0: link down
  836. [  147.793265] ADDRCONF(NETDEV_UP): eth0: link is not ready
  837. [  148.790866] r8168: eth0: link down
  838. [  149.573687] r8168: eth0: link up
  839. [  149.575615] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  840. [  149.790885] r8168: eth0: link up
  841. [  149.915896] r8168: eth0: link down
  842. [  149.916629] ADDRCONF(NETDEV_UP): eth0: link is not ready
  843. [  150.910867] r8168: eth0: link down
  844. [  151.478061] r8168: eth0: link up
  845. [  151.480175] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  846. [  151.956330] r8168: eth0: link down
  847. [  151.957187] ADDRCONF(NETDEV_UP): eth0: link is not ready
  848. [  152.084639] r8168: eth0: link down
  849. [  152.085387] ADDRCONF(NETDEV_UP): eth0: link is not ready
  850. [  153.573469] r8168: eth0: link up
  851. [  153.575495] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  852. [  154.080887] r8168: eth0: link up
  853. [  162.130911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  854. [  164.210032] eth0: no IPv6 routers present
  855. [  193.160909] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  856. [  228.130904] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  857. [  259.160912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  858. [  290.160919] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  859. [  327.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  860. [  358.160074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  861. [  389.130914] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  862. [  420.130908] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  863. [  451.160385] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  864. [  488.160919] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  865. [  519.130911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  866. [  550.130338] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  867. [  581.130508] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  868. [  614.160892] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  869. [  645.130911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  870. [  676.161286] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  871. [  719.130905] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  872. [  750.160909] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  873. [  787.130903] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  874. [  820.160908] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  875. [  857.130910] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  876. [  888.160910] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  877. [  927.160907] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  878. [  962.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  879. [  972.400906] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  880. [ 1009.140083] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  881. [ 1040.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  882. [ 1071.130066] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  883. [ 1104.130909] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  884. [ 1135.160924] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  885. [ 1168.130915] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  886. [ 1199.160903] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  887. [ 1232.160903] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  888. [ 1263.160086] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  889. [ 1294.160091] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  890. [ 1329.130917] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  891. [ 1364.130909] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  892. [ 1366.870120] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  893. [ 1398.130880] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  894. [ 1429.130497] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  895. [ 1460.130906] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  896. [ 1491.160907] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  897. [ 1524.160076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  898. [ 1559.160911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  899. [ 1590.160911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  900. [ 1629.132584] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  901. [ 1660.136944] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  902. [ 1670.412926] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  903. [ 1707.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  904. [ 1740.130906] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  905. [ 1773.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  906. [ 1810.130095] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  907. [ 1851.140075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  908. [ 1884.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  909. [ 1915.130061] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  910. [ 1948.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  911. [ 1983.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  912. [ 2018.136740] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  913. [ 2049.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  914. [ 2080.130075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  915. [ 2115.136609] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  916. [ 2146.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  917. [ 2177.137308] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  918. [ 2210.130074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  919. [ 2241.130908] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  920. [ 2272.170091] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  921. [ 2305.130910] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  922. [ 2336.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  923. [ 2367.170069] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  924. [ 2398.130073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  925. [ 2431.170074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  926. [ 2462.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  927. [ 2509.130073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  928. [ 2548.140076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  929. [ 2579.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  930. [ 2610.140069] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  931. [ 2643.137805] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  932. [ 2674.131494] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  933. [ 2705.170075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  934. [ 2736.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  935. [ 2767.133601] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  936. [ 2777.420075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  937. [ 2816.130077] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  938. [ 2859.130913] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  939. [ 2894.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  940. [ 2925.140072] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  941. [ 2960.140076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  942. [ 2991.140073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  943. [ 3022.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  944. [ 3053.140073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  945. [ 3086.130081] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  946. [ 3117.130972] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  947. [ 3127.403760] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  948. [ 3166.130087] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  949. [ 3201.140077] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  950. [ 3232.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  951. [ 3271.139584] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  952. [ 3302.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  953. [ 3333.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  954. [ 3364.160078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  955. [ 3395.160910] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  956. [ 3436.130911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  957. [ 3475.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  958. [ 3506.130073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  959. [ 3511.670065] usb 2-3: device not accepting address 2, error -110
  960. [ 3511.790074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  961. [ 3542.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  962. [ 3573.130907] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  963. [ 3612.130074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  964. [ 3643.160913] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  965. [ 3678.130910] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  966. [ 3709.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  967. [ 3744.131120] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  968. [ 3777.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  969. [ 3808.140107] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  970. [ 3849.130079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  971. [ 3880.167305] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  972. [ 3911.130882] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  973. [ 3921.411032] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  974. [ 3937.690074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  975. [ 3937.970911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  976. [ 3969.140075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  977. [ 4002.130077] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  978. [ 4035.140069] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  979. [ 4070.138827] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  980. [ 4103.134083] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  981. [ 4134.140076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  982. [ 4165.130077] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  983. [ 4175.400079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  984. [ 4214.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  985. [ 4245.140076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  986. [ 4276.133469] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  987. [ 4309.139819] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  988. [ 4350.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  989. [ 4381.140075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  990. [ 4418.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  991. [ 4455.130913] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  992. [ 4486.136640] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  993. [ 4496.672343] usb 2-3: device not accepting address 2, error -110
  994. [ 4496.800075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  995. [ 4527.131329] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  996. [ 4576.130076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  997. [ 4607.130909] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  998. [ 4644.160086] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  999. [ 4675.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1000. [ 4708.160083] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1001. [ 4739.137587] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1002. [ 4770.130913] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1003. [ 4801.140075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1004. [ 4832.138969] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1005. [ 4865.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1006. [ 4896.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1007. [ 4927.130075] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1008. [ 4960.160109] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1009. [ 4991.130945] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1010. [ 5022.136459] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1011. [ 5057.130913] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1012. [ 5088.130921] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1013. [ 5119.130946] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1014. [ 5150.130908] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1015. [ 5187.140083] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1016. [ 5220.130078] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1017. [ 5253.160918] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1018. [ 5284.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1019. [ 5315.130099] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1020. [ 5354.130073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1021. [ 5387.140110] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1022. [ 5394.860908] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1023. [ 5405.402606] usb 2-3: device not accepting address 2, error -110
  1024. [ 5405.520908] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1025. [ 5444.138156] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1026. [ 5475.130911] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1027. [ 5508.132141] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1028. [ 5547.160079] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1029. [ 5588.160085] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1030. [ 5625.140076] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1031. [ 5656.130907] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1032. [ 5695.130910] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1033. [ 5734.130073] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1034. [ 5773.130912] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1035. [ 5812.140074] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1036. [ 5849.130080] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1037. [ 5880.130884] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1038. [ 5915.130080] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1039. [ 5948.160080] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1040. [ 5979.160090] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1041. [ 5979.460064] usb 2-3: reset high speed USB device using ehci_hcd and address 2
  1042. [ 5979.666898] usb 2-3: can't restore configuration #1 (error=-32)
  1043. [ 5979.666971] usb 2-3: USB disconnect, address 2
  1044. [ 5979.890200] usb 2-3: new high speed USB device using ehci_hcd and address 4
  1045. [ 5980.043666] usb 2-3: configuration #1 chosen from 1 choice
  1046. [ 5980.043964] usb 2-3: can't set config #1, error -32
  1047. [17073.961702] r8168: eth0: link down
  1048. [17074.080069] r8168: eth0: link down
  1049. [17077.876904] r8168: eth0: link down
  1050. [17077.877742] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1051. [17077.995338] r8168: eth0: link down
  1052. [17077.997282] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1053. [17084.611735] r8168: eth0: link up
  1054. [17084.613625] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1055. [17084.990042] r8168: eth0: link up
  1056. [17088.876750] r8168: eth0: link down
  1057. [17088.877595] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1058. [17089.001757] r8168: eth0: link down
  1059. [17089.002598] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1060. [17090.000875] r8168: eth0: link down
  1061. [17090.480017] r8168: eth0: link up
  1062. [17090.481909] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1063. [17091.000886] r8168: eth0: link up
  1064. [17101.370031] eth0: no IPv6 routers present
  1065. [17102.871153] r8168: eth0: link down
  1066. [17103.000893] r8168: eth0: link down
  1067. [17113.331304] r8168: eth0: link up
  1068. [17114.000064] r8168: eth0: link up
  1069. [17115.877341] r8168: eth0: link down
  1070. [17115.878181] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1071. [17116.870042] r8168: eth0: link down
  1072. [17117.408089] r8168: eth0: link up
  1073. [17117.409985] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1074. [17117.870525] r8168: eth0: link up
  1075. [17127.770034] eth0: no IPv6 routers present
  1076. [38366.585635] r8168: eth0: link down
  1077. [38366.586556] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1078. [38366.724139] r8168: eth0: link down
  1079. [38366.725043] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1080. [38367.720027] r8168: eth0: link down
  1081. [38368.191950] r8168: eth0: link up
  1082. [38368.193839] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1083. [38368.720055] r8168: eth0: link up
  1084. [38379.030041] eth0: no IPv6 routers present
  1085. [48627.096835] r8168: eth0: link down
  1086. [48628.010050] r8168: eth0: link down
  1087. [48630.878365] r8168: eth0: link down
  1088. [48630.879232] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1089. [48630.995305] r8168: eth0: link down
  1090. [48630.997248] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1091. [48637.789588] r8168: eth0: link up
  1092. [48637.791521] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1093. [48637.990045] r8168: eth0: link up
  1094. [48648.680039] eth0: no IPv6 routers present
  1095. [48658.858681] r8168: eth0: link down
  1096. [48658.990895] r8168: eth0: link down
  1097. [48671.854400] r8168: eth0: link up
  1098. [48671.990042] r8168: eth0: link up
  1099. [48692.277873] r8168: eth0: link down
  1100. [48692.990061] r8168: eth0: link down
  1101. [48704.903165] r8168: eth0: link up
  1102. [48704.990061] r8168: eth0: link up
  1103. [48724.308858] r8168: eth0: link down
  1104. [48724.990061] r8168: eth0: link down
  1105. [48739.093883] r8168: eth0: link up
  1106. [48739.990044] r8168: eth0: link up
  1107. [48743.062731] r8168: eth0: link down
  1108. [48743.990878] r8168: eth0: link down
  1109. [48759.830881] r8168: eth0: link up
  1110. [48759.990877] r8168: eth0: link up
  1111. [48764.100458] r8168: eth0: link down
  1112. [48764.990062] r8168: eth0: link down
  1113. [48779.967350] r8168: eth0: link up
  1114. [48779.990866] r8168: eth0: link up
  1115. [48785.315975] r8168: eth0: link down
  1116. [48785.990042] r8168: eth0: link down
  1117. [48797.816855] r8168: eth0: link up
  1118. [48797.990042] r8168: eth0: link up
  1119. [48817.322813] r8168: eth0: link down
  1120. [48817.990042] r8168: eth0: link down
  1121. [48834.450538] r8168: eth0: link up
  1122. [48834.990060] r8168: eth0: link up
  1123. [48841.915794] r8168: eth0: link down
  1124. [48841.990043] r8168: eth0: link down
  1125. [48858.801775] r8168: eth0: link up
  1126. [48858.990068] r8168: eth0: link up
  1127. [48863.973992] r8168: eth0: link down
  1128. [48863.990867] r8168: eth0: link down
  1129. [48874.430691] r8168: eth0: link up
  1130. [48874.990062] r8168: eth0: link up
  1131. [48893.109833] r8168: eth0: link down
  1132. [48893.990877] r8168: eth0: link down
  1133. [48906.999250] r8168: eth0: link up
  1134. [48907.990040] r8168: eth0: link up
  1135. [48911.045700] r8168: eth0: link down
  1136. [48911.990043] r8168: eth0: link down
  1137. [48921.364210] r8168: eth0: link up
  1138. [48921.990868] r8168: eth0: link up
  1139. [53591.555579] r8168: eth0: link down
  1140. [53591.556431] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1141. [53591.661787] r8168: eth0: link down
  1142. [53591.662678] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1143. [53592.660036] r8168: eth0: link down
  1144. [53593.244821] r8168: eth0: link up
  1145. [53593.246706] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1146. [53593.667931] r8168: eth0: link up
  1147. [53603.340041] eth0: no IPv6 routers present
RAW Paste Data
Pastebin PRO WINTER Special!
Get 40% OFF Pastebin PRO accounts!
Top