Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.9.56-linaro-lt-qcom (milan@ubuntu) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Tue Nov 7 08:22:31 PST 2017
- [ 0.000000] Boot CPU: AArch64 Processor [410fd030]
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] cma: Reserved 128 MiB at 0x00000000b8000000
- [ 0.000000] On node 0 totalpages: 245760
- [ 0.000000] DMA zone: 3840 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 245760 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] percpu: Embedded 21 pages/cpu @ffff800037f25000 s48792 r8192 d29032 u86016
- [ 0.000000] pcpu-alloc: s48792 r8192 d29032 u86016 alloc=21*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319, 824069
- [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 241920
- [ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=ttyMSM0,115200n8 androidboot.emmc=true androidboot.serialno=af482228 androidboot.baseband=apq mdss_mdp.panel=0:dsi:0:
- [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
- [ 0.000000] log_buf_len min size: 16384 bytes
- [ 0.000000] log_buf_len: 32768 bytes
- [ 0.000000] early log buf free: 14612(89%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.000000] Memory: 812600K/983040K available (9852K kernel code, 1318K rwdata, 4472K rodata, 1024K init, 312K bss, 39368K reserved, 131072K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008a20000 ( 9856 KB)
- [ 0.000000] .rodata : 0xffff000008a20000 - 0xffff000008e90000 ( 4544 KB)
- [ 0.000000] .init : 0xffff000008e90000 - 0xffff000008f90000 ( 1024 KB)
- [ 0.000000] .data : 0xffff000008f90000 - 0xffff0000090d9a00 ( 1319 KB)
- [ 0.000000] .bss : 0xffff0000090d9a00 - 0xffff000009127d9c ( 313 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.001000] Console: colour dummy device 80x25
- [ 0.001023] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.001034] pid_max: default: 32768 minimum: 301
- [ 0.001113] Security Framework initialized
- [ 0.001162] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.001171] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.002071] ASID allocator initialised with 65536 entries
- [ 0.036415] EFI services will not be available.
- [ 0.076626] Detected VIPT I-cache on CPU1
- [ 0.076672] CPU1: Booted secondary processor [410fd030]
- [ 0.108681] Detected VIPT I-cache on CPU2
- [ 0.108721] CPU2: Booted secondary processor [410fd030]
- [ 0.140750] Detected VIPT I-cache on CPU3
- [ 0.140784] CPU3: Booted secondary processor [410fd030]
- [ 0.140856] Brought up 4 CPUs
- [ 0.140880] SMP: Total of 4 processors activated.
- [ 0.140889] CPU features: detected feature: 32-bit EL0 Support
- [ 0.140975] CPU: All CPU(s) started at EL1
- [ 0.140992] alternatives: patching kernel code
- [ 0.141703] devtmpfs: initialized
- [ 0.162562] DMI not present or invalid.
- [ 0.162822] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.162839] futex hash table entries: 1024 (order: 5, 131072 bytes)
- [ 0.167282] pinctrl core: initialized pinctrl subsystem
- [ 0.169061] NET: Registered protocol family 16
- [ 0.184738] cpuidle: using governor menu
- [ 0.185854] Error: Driver 'msm_iommu' is already registered, aborting...
- [ 0.185864] qcom_iommu: Failed to register IOMMU driver
- [ 0.185869] Failed to initialise IOMMU /soc/qcom,iommu@1e00000
- [ 0.186555] vdso: 2 pages (1 code @ ffff000008a27000, 1 data @ ffff000008f94000)
- [ 0.186572] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.187398] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.187716] Serial: AMBA PL011 UART driver
- [ 0.204404] irq: no irq domain found for /hexagon-smp2p/slave-kernel !
- [ 0.205754] irq: no irq domain found for /wcnss-smp2p/slave-kernel !
- [ 0.233710] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.234776] ACPI: Interpreter disabled.
- [ 0.236296] vgaarb: loaded
- [ 0.236574] SCSI subsystem initialized
- [ 0.236741] libata version 3.00 loaded.
- [ 0.237072] usbcore: registered new interface driver usbfs
- [ 0.237141] usbcore: registered new interface driver hub
- [ 0.237228] usbcore: registered new device driver usb
- [ 0.237838] pps_core: LinuxPPS API ver. 1 registered
- [ 0.237845] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.237872] PTP clock support registered
- [ 0.238015] dmi: Firmware registration failed.
- [ 0.241258] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.242851] clocksource: Switched to clocksource arch_sys_counter
- [ 0.243010] VFS: Disk quotas dquot_6.6.0
- [ 0.243091] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.243518] pnp: PnP ACPI: disabled
- [ 0.252331] s1: Bringing 0uV into 375000-375000uV
- [ 0.252806] s3: Bringing 0uV into 375000-375000uV
- [ 0.253096] s4: Bringing 0uV into 1800000-1800000uV
- [ 0.253574] l1: supplied by s3
- [ 0.253609] l1: Bringing 0uV into 375000-375000uV
- [ 0.254026] l2: supplied by s3
- [ 0.254057] l2: Bringing 0uV into 1200000-1200000uV
- [ 0.254435] l3: supplied by s3
- [ 0.254468] l3: Bringing 0uV into 375000-375000uV
- [ 0.254814] l4: supplied by s4
- [ 0.254892] l4: Bringing 0uV into 1750000-1750000uV
- [ 0.255305] l5: supplied by s4
- [ 0.255340] l5: Bringing 0uV into 1750000-1750000uV
- [ 0.255725] l6: supplied by s4
- [ 0.255755] l6: Bringing 0uV into 1800000-1800000uV
- [ 0.256085] l7: supplied by s4
- [ 0.256134] l7: Bringing 0uV into 1750000-1750000uV
- [ 0.256485] l8: Bringing 0uV into 1750000-1750000uV
- [ 0.256837] l9: Bringing 0uV into 1750000-1750000uV
- [ 0.257203] l10: Bringing 0uV into 1750000-1750000uV
- [ 0.257547] l11: Bringing 0uV into 1750000-1750000uV
- [ 0.257926] l12: Bringing 0uV into 1750000-1750000uV
- [ 0.258346] l13: Bringing 0uV into 1750000-1750000uV
- [ 0.258770] l14: Bringing 0uV into 1750000-1750000uV
- [ 0.259176] l15: Bringing 0uV into 1750000-1750000uV
- [ 0.259997] l16: Bringing 0uV into 1750000-1750000uV
- [ 0.260419] l17: Bringing 0uV into 3300000-3300000uV
- [ 0.261516] l18: Bringing 0uV into 1750000-1750000uV
- [ 0.262354] NET: Registered protocol family 2
- [ 0.262887] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.262974] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
- [ 0.263138] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.263202] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.263236] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.263385] NET: Registered protocol family 1
- [ 0.263692] RPC: Registered named UNIX socket transport module.
- [ 0.263699] RPC: Registered udp transport module.
- [ 0.263704] RPC: Registered tcp transport module.
- [ 0.263709] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.263719] PCI: CLS 0 bytes, default 128
- [ 0.263889] Unpacking initramfs...
- [ 0.461701] Freeing initrd memory: 3360K
- [ 0.462232] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 0.462506] kvm [1]: HYP mode not available
- [ 0.463583] audit: initializing netlink subsys (disabled)
- [ 0.463621] audit: type=2000 audit(0.459:1): initialized
- [ 0.464183] workingset: timestamp_bits=46 max_order=18 bucket_order=0
- [ 0.474269] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.475121] NFS: Registering the id_resolver key type
- [ 0.475143] Key type id_resolver registered
- [ 0.475148] Key type id_legacy registered
- [ 0.475161] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.475443] 9p: Installing v9fs 9p2000 file system support
- [ 0.478057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.478153] io scheduler noop registered
- [ 0.478358] io scheduler cfq registered (default)
- [ 0.480991] libphy: mdio_driver_register: phy-bcm-ns2-pci
- [ 0.495561] xenfs: not registering filesystem on non-xen platform
- [ 0.501463] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.504128] SuperH (H)SCI(F) driver initialized
- [ 0.504852] msm_serial 78af000.serial: msm_serial: detected port #1
- [ 0.504948] msm_serial 78af000.serial: uartclk = 19200000
- [ 0.505005] 78af000.serial: ttyMSM1 at MMIO 0x78af000 (irq = 137, base_baud = 1200000) is a MSM
- [ 0.505442] msm_serial 78b0000.serial: msm_serial: detected port #0
- [ 0.505512] msm_serial 78b0000.serial: uartclk = 7372800
- [ 0.505557] 78b0000.serial: ttyMSM0 at MMIO 0x78b0000 (irq = 138, base_baud = 460800) is a MSM
- [ 0.505574] msm_serial: console setup on port #0
- [ 1.425977] console [ttyMSM0] enabled
- [ 1.431190] msm_serial: driver initialized
- [ 1.435280] [drm] Initialized
- [ 1.440078] irq: no irq domain found for /soc/mdss@1a00000 !
- [ 1.441937] irq: no irq domain found for /soc/mdss@1a00000 !
- [ 1.447580] clk: couldn't get parent clock 0 for /soc/mdss@1a00000/dsi@1a98000
- [ 1.462444] loop: module loaded
- [ 1.463774] hisi_sas: driver version v1.6
- [ 1.467990] spi_qup 78b7000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 1.469424] spi_qup 78b9000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 1.476677] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
- [ 1.503886] libphy: Fixed MDIO Bus: probed
- [ 1.504761] tun: Universal TUN/TAP device driver, 1.6
- [ 1.506878] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.514025] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 1.518076] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 1.523991] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 1.529705] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 1.536749] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 1.542205] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 1.550280] sky2: driver version 1.30
- [ 1.556725] usbcore: registered new interface driver asix
- [ 1.559835] usbcore: registered new interface driver ax88179_178a
- [ 1.565204] usbcore: registered new interface driver cdc_ether
- [ 1.571281] usbcore: registered new interface driver net1080
- [ 1.577002] usbcore: registered new interface driver cdc_subset
- [ 1.582834] usbcore: registered new interface driver zaurus
- [ 1.588480] usbcore: registered new interface driver cdc_ncm
- [ 1.594178] VFIO - User Level meta-driver version: 0.3
- [ 1.605626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.605663] ehci-pci: EHCI PCI platform driver
- [ 1.611402] ehci-platform: EHCI generic platform driver
- [ 1.615981] ehci-exynos: EHCI EXYNOS driver
- [ 1.621054] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 1.625225] msm_hsusb_host 78d9000.ehci: unable to find transceiver
- [ 1.630721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.636834] ohci-pci: OHCI PCI platform driver
- [ 1.643166] ohci-platform: OHCI generic platform driver
- [ 1.647712] ohci-exynos: OHCI EXYNOS driver
- [ 1.653565] usbcore: registered new interface driver usb-storage
- [ 1.656961] usbcore: registered new interface driver usbserial
- [ 1.663123] usbcore: registered new interface driver usbserial_generic
- [ 1.668751] usbserial: USB Serial support registered for generic
- [ 1.685562] usb3503 usb2513: switched to HUB mode
- [ 1.685582] usb3503 usb2513: usb3503_probe: probed in hub mode
- [ 1.690801] mousedev: PS/2 mouse device common for all mice
- [ 1.695886] input: pm8941_pwrkey as /devices/platform/soc/200f000.spmi/spmi-0/0-00/200f000.spmi:pm8916@0:pwrkey@800/input/input0
- [ 1.701652] i2c /dev entries driver
- [ 1.713177] i2c_qup 78b6000.i2c:
- [ 1.713177] tx channel not available
- [ 1.716097] i2c_qup 78b8000.i2c:
- [ 1.716097] tx channel not available
- [ 1.723387] 3-0039 supply dvdd not found, using dummy regulator
- [ 1.729412] 3-0039 supply pvdd not found, using dummy regulator
- [ 1.735301] 3-0039 supply a2vdd not found, using dummy regulator
- [ 1.756679] i2c_qup 78ba000.i2c:
- [ 1.756679] tx channel not available
- [ 1.759864] qcom-tsens 4a8000.thermal-sensor: tsens calibration failed
- [ 1.763992] sdhci: Secure Digital Host Controller Interface driver
- [ 1.769055] sdhci: Copyright(c) Pierre Ossman
- [ 1.775732] Synopsys Designware Multimedia Card Interface Driver
- [ 1.780409] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.838861] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using ADMA 64-bit
- [ 1.839521] sdhci_msm 7864900.sdhci: Got CD GPIO
- [ 1.898947] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using ADMA 64-bit
- [ 1.900939] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.907543] usbcore: registered new interface driver usbhid
- [ 1.911831] usbhid: USB HID core driver
- [ 1.919195] remoteproc remoteproc0: 4080000.hexagon is available
- [ 1.921035] remoteproc remoteproc0: Direct firmware load for mba.mbn failed with error -2
- [ 1.927231] remoteproc remoteproc0: powering up 4080000.hexagon
- [ 1.929455] usbcore: registered new interface driver snd-usb-audio
- [ 1.931507] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 1.931568] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 1.931635] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 1.931712] apq8016-lpass-cpu 7708000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting mi2s-osr-clk: -2
- [ 1.933846] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: PMIC REV: 1 CODEC Version: 1
- [ 1.935436] qcom-apq8016-sbc 7702000.sound: hdmi-hifi.0 <-> Quatenary MI2S mapping ok
- [ 1.935605] qcom-apq8016-sbc 7702000.sound: multicodec <-> Primary MI2S mapping ok
- [ 1.935756] qcom-apq8016-sbc 7702000.sound: multicodec <-> Tertiary MI2S mapping ok
- [ 1.936628] msm8916-wcd-digital-codec 771c000.codec: ASoC: Failed to create Digital Mic1 debugfs file
- [ 1.936635] msm8916-wcd-digital-codec 771c000.codec: ASoC: Failed to create Digital Mic2 debugfs file
- [ 1.938572] NET: Registered protocol family 10
- [ 1.939383] NET: Registered protocol family 17
- [ 1.939457] 9pnet: Installing 9P2000 support
- [ 1.939516] Key type dns_resolver registered
- [ 1.939659] NET: Registered protocol family 42
- [ 1.940991] Registered cp15_barrier emulation handler
- [ 1.941004] Registered setend emulation handler
- [ 1.941551] registered taskstats version 1
- [ 1.948352] msm_iommu 1f00000.qcom,iommu: invalid resource
- [ 1.948463] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at ffff0000092e0000, with 2 ctx banks
- [ 1.948479] msm_iommu 1f00000.qcom,iommu: iommu sec: pgtable size: 94208
- [ 1.949324] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 1.949742] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 1.951483] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at ffff000009300000, with 20 ctx banks
- [ 1.952011] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context jpeg_enc0 using bank 2
- [ 1.952375] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 1.952722] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 1.953071] msm_iommu_ctx 1e25000.venus_ns: context venus_ns using bank 5
- [ 1.953407] msm_iommu_ctx 1e26000.qcom,iommu-ctx: context cpp using bank 6
- [ 1.953745] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 1.954083] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 1.954419] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 1.954812] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 1.955222] msm_iommu_ctx 1e33000.venus_sec_pixel: context venus_sec_pixel using bank 19
- [ 1.955614] msm_iommu_ctx 1e34000.venus_sec_bitstream: context venus_sec_bitstream using bank 20
- [ 1.955997] msm_iommu_ctx 1e35000.venus_sec_non_pixel: context venus_sec_non_pixel using bank 21
- [ 1.956380] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 1.956762] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 1.957099] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 1.957435] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 1.957860] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 1.958206] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 1.958555] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 1.958914] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 1.960118] 1a00000.mdss supply vdd not found, using dummy regulator
- [ 1.960556] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops)
- [ 1.960629] 1a98000.dsi supply gdsc not found, using dummy regulator
- [ 1.960790] 1a98000.dsi supply gdsc not found, using dummy regulator
- [ 1.961323] msm 1a00000.mdss: bound 1a98000.dsi (ops dsi_ops)
- [ 1.961339] msm 1a00000.mdss: bound 1c00000.adreno-3xx (ops a3xx_ops)
- [ 1.988147] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.988150] [drm] Driver supports precise vblank timestamp query.
- [ 2.020126] msm 1a00000.mdss: No connectors reported connected with modes
- [ 2.020134] [drm] Cannot find any crtc or sizes - going 1024x768
- [ 2.129821] mmc0: new HS200 MMC card at address 0001
- [ 2.130328] mmcblk0: mmc0:0001 DS2008 7.28 GiB
- [ 2.130585] mmcblk0boot0: mmc0:0001 DS2008 partition 1 4.00 MiB
- [ 2.130817] mmcblk0boot1: mmc0:0001 DS2008 partition 2 4.00 MiB
- [ 2.131074] mmcblk0rpmb: mmc0:0001 DS2008 partition 3 4.00 MiB
- [ 2.202008] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
- [ 2.360932] remoteproc remoteproc0: Direct firmware load for mba.mbn failed with error -2
- [ 2.360940] remoteproc remoteproc0: request_firmware failed: -2
- [ 2.375175] Console: switching to colour frame buffer device 128x48
- [ 2.401950] msm 1a00000.mdss: fb0: msm frame buffer device
- [ 2.423893] msm_otg 78d9000.phy: OTG regs = ffff0000092dd000
- [ 2.539584] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 200000000, volt: 1050000, enabled: 1. New: freq: 200000000, volt: 1050000, enabled: 1
- [ 2.539632] cpu cpu1: opp_list_debug_create_link: Failed to create link
- [ 2.552666] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
- [ 2.559170] cpu cpu2: opp_list_debug_create_link: Failed to create link
- [ 2.566112] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
- [ 2.572447] cpu cpu3: opp_list_debug_create_link: Failed to create link
- [ 2.579388] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
- [ 2.586735] input: gpio_keys as /devices/platform/gpio_keys/input/input1
- [ 2.592889] hctosys: unable to open rtc device (rtc0)
- [ 2.599733] ALSA device list:
- [ 2.604288] #0: DB410c
- [ 2.607997] Freeing unused kernel memory: 1024K
- [ 2.627535] random: fast init done
- [ 2.678889] msm_otg 78d9000.phy: Avail curr from USB = 100
- [ 2.760702] i2c-qcom-cci 1b0c000.qcom,cci: cci_probe: CCI HW version = 0x10000008
- [ 5.354361] coresight-replicator-qcom 824000.replicator: REPLICATOR 1.0 initialized
- [ 5.361259] coresight-etm4x 85c000.etm: ETM 4.0 initialized
- [ 5.363894] coresight-etm4x 85d000.etm: ETM 4.0 initialized
- [ 5.368979] coresight-etm4x 85e000.etm: ETM 4.0 initialized
- [ 5.374492] coresight-etm4x 85f000.etm: ETM 4.0 initialized
- [ 7.968889] EXT4-fs (mmcblk0p10): recovery complete
- [ 7.970328] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.170045] EXT4-fs (mmcblk0p10): re-mounted. Opts: errors=remount-ro,data=ordered
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement