Guest User

hikey960_boot_log

a guest
Jun 5th, 2018
153
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.002169] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  2. [ 0.002756] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  3. [ 0.002800] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  4. [ 0.002825] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  5. [ 0.020078] ASID allocator initialised with 65536 entries
  6. [ 0.028055] Hierarchical SRCU implementation.
  7. [ 0.039236] Remapping and enabling EFI services.
  8. [ 0.039328] EFI remap 0x00000000ba630000 => (ptrval)
  9. [ 0.039343] EFI remap 0x00000000ba660000 => (ptrval)
  10. [ 0.039378] EFI remap 0x00000000ba6b0000 => (ptrval)
  11. [ 0.039393] EFI remap 0x00000000ba800000 => (ptrval)
  12. [ 0.039409] EFI remap 0x00000000ba850000 => (ptrval)
  13. [ 0.039424] EFI remap 0x00000000bf870000 => (ptrval)
  14. [ 0.039439] EFI remap 0x00000000bf8c0000 => (ptrval)
  15. [ 0.039448] EFI remap 0x00000000fff05000 => (ptrval)
  16. [ 0.044131] smp: Bringing up secondary CPUs ...
  17. [ 0.072527] Detected VIPT I-cache on CPU1
  18. [ 0.072615] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  19. [ 0.100480] Detected VIPT I-cache on CPU2
  20. [ 0.100507] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  21. [ 0.128496] Detected VIPT I-cache on CPU3
  22. [ 0.128515] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  23. [ 1.184653] CPU4: failed to come online
  24. [ 1.184704] CPU4: failed in unknown state : 0x0
  25. [ 2.241084] CPU5: failed to come online
  26. [ 2.241094] CPU5: failed in unknown state : 0x0
  27. [ 3.297517] CPU6: failed to come online
  28. [ 3.297525] CPU6: failed in unknown state : 0x0
  29. [ 4.353949] CPU7: failed to come online
  30. [ 4.353957] CPU7: failed in unknown state : 0x0
  31. [ 4.354001] smp: Brought up 1 node, 4 CPUs
  32. [ 4.354008] SMP: Total of 4 processors activated.
  33. [ 4.354019] CPU features: detected feature: 32-bit EL0 Support
  34. [ 4.354270] CPU: All CPU(s) started at EL2
  35. [ 4.354308] alternatives: patching kernel code
  36. [ 4.355553] devtmpfs: initialized
  37. [ 4.359567] Registered cp15_barrier emulation handler
  38. [ 4.359606] Registered setend emulation handler
  39. [ 4.359936] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 764504178s
  40. [ 4.360026] futex hash table entries: 2048 (order: 6, 262144 bytes)
  41. [ 4.360791] pinctrl core: initialized pinctrl subsystem
  42. [ 4.362355] DMI not present or invalid.
  43. [ 4.362796] NET: Registered protocol family 16
  44. [ 4.363200] audit: initializing netlink subsys (disabled)
  45. [ 4.363360] audit: type=2000 audit(4.360:1): state=initialized audit_enabled=0 res=1
  46. [ 4.365842] cpuidle: using governor menu
  47. [ 4.366513] vdso: 2 pages (1 code @ 000000007de91198, 1 data @ 0000000087607889)
  48. [ 4.366551] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  49. [ 4.374446] DMA: preallocated 256 KiB pool for atomic allocations
  50. [ 4.375345] Serial: AMBA PL011 UART driver
  51. [ 4.397785] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uarte
  52. [ 4.398045] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uarte
  53. [ 4.398175] uart-pl011 fff32000.serial: could not find pctldev for node /soc/pinmux@e896c000/uarte
  54. [ 4.411269] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  55. [ 4.412445] ACPI: Interpreter disabled.
  56. [ 4.413475] vgaarb: loaded
  57. [ 4.413781] SCSI subsystem initialized
  58. [ 4.414282] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmxe
  59. [ 4.414336] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmxe
  60. [ 4.414604] usbcore: registered new interface driver usbfs
  61. [ 4.414641] usbcore: registered new interface driver hub
  62. [ 4.414744] usbcore: registered new device driver usb
  63. [ 4.415186] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2ce
  64. [ 4.415242] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2ce
  65. [ 4.415272] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2ce
  66. [ 4.415593] pps_core: LinuxPPS API ver. 1 registered
  67. [ 4.415605] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.>
  68. [ 4.415626] PTP clock support registered
  69. [ 4.415723] EDAC MC: Ver: 3.0.0
  70. [ 4.416005] dmi: Firmware registration failed.
  71. [ 4.416164] Registered efivars operations
  72. [ 4.416719] Advanced Linux Sound Architecture Driver Initialized.
  73. [ 4.417727] clocksource: Switched to clocksource arch_sys_counter
  74. [ 4.418031] VFS: Disk quotas dquot_6.6.0
  75. [ 4.418097] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  76. [ 4.418284] pnp: PnP ACPI: disabled
  77. [ 4.422728] NET: Registered protocol family 2
  78. [ 4.423484] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  79. [ 4.423698] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  80. [ 4.424294] TCP: Hash tables configured (established 32768 bind 32768)
  81. [ 4.424490] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  82. [ 4.424560] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  83. [ 4.424802] NET: Registered protocol family 1
  84. [ 4.425341] RPC: Registered named UNIX socket transport module.
  85. [ 4.425354] RPC: Registered udp transport module.
  86. [ 4.425361] RPC: Registered tcp transport module.
  87. [ 4.425368] RPC: Registered tcp NFSv4.1 backchannel transport module.
  88. [ 4.425573] Unpacking initramfs...
  89. [ 4.553188] Freeing initrd memory: 4436K
  90. [ 4.554309] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  91. [ 4.554481] hw perfevents: /a73-pmu: failed to probe PMU!
  92. [ 4.554491] hw perfevents: /a73-pmu: failed to register PMU devices!
  93. [ 4.554726] kvm [1]: 8-bit VMID
  94. [ 4.554735] kvm [1]: IDMAP page: a9b000
  95. [ 4.554741] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  96. [ 4.555937] kvm [1]: vgic-v2@e82b4000
  97. [ 4.556002] kvm [1]: vgic interrupt IRQ1
  98. [ 4.556025] kvm [1]: virtual timer IRQ4
  99. [ 4.556106] kvm [1]: Hyp mode initialized successfully
  100. [ 4.559107] Initialise system trusted keyrings
  101. [ 4.559283] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  102. [ 4.563673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  103. [ 4.564274] NFS: Registering the id_resolver key type
  104. [ 4.564334] Key type id_resolver registered
  105. [ 4.564341] Key type id_legacy registered
  106. [ 4.564355] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  107. [ 4.564590] 9p: Installing v9fs 9p2000 file system support
  108. [ 4.566377] Key type asymmetric registered
  109. [ 4.566406] Asymmetric key parser 'x509' registered
  110. [ 4.566625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  111. [ 4.566784] io scheduler noop registered
  112. [ 4.566954] io scheduler cfq registered (default)
  113. [ 4.566963] io scheduler mq-deadline registered
  114. [ 4.566970] io scheduler kyber registered
  115. [ 4.569135] pinctrl-single e896c000.pinmux: 124 pins at pa 00000000b1f8fdf7 size 496
  116. [ 4.569630] pinctrl-single ff37e000.pinmux: 6 pins at pa 00000000fad8cfb8 size 24
  117. [ 4.569899] pinctrl-single ff3b6000.pinmux: 12 pins at pa 000000002c961190 size 48
  118. [ 4.570056] pinctrl-single ff3fd000.pinmux: 6 pins at pa 0000000007cbf31f size 24
  119. [ 4.570206] pinctrl-single fff11000.pinmux: 42 pins at pa 00000000a61f080e size 168
  120. [ 4.570412] pinctrl-single e896c800.pinmux: 128 pins at pa 0000000063004d28 size 512
  121. [ 4.570525] pinctrl-single ff3b6800.pinmux: 6 pins at pa 00000000c848198a size 24
  122. [ 4.570659] pinctrl-single ff3fd800.pinmux: 6 pins at pa 0000000068351d7b size 24
  123. [ 4.570763] pinctrl-single ff37e800.pinmux: 6 pins at pa 00000000725adb01 size 24
  124. [ 4.570914] pinctrl-single fff11800.pinmux: 47 pins at pa 00000000497ba036 size 188
  125. [ 4.572593] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  126. [ 4.572959] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  127. [ 4.573207] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  128. [ 4.573450] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  129. [ 4.573686] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  130. [ 4.574018] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  131. [ 4.574269] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  132. [ 4.574589] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  133. [ 4.574830] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  134. [ 4.575093] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  135. [ 4.575331] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  136. [ 4.575588] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  137. [ 4.575847] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  138. [ 4.576090] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  139. [ 4.576344] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  140. [ 4.576568] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  141. [ 4.576792] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  142. [ 4.577017] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  143. [ 4.577357] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  144. [ 4.577639] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  145. [ 4.577997] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  146. [ 4.578296] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  147. [ 4.578574] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  148. [ 4.578833] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  149. [ 4.579107] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  150. [ 4.579415] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  151. [ 4.579741] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  152. [ 4.580031] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  153. [ 4.580287] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  154. [ 4.585953] k3-dma fdf30000.dma: initialized
  155. [ 4.590536] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  156. [ 4.592473] SuperH (H)SCI(F) driver initialized
  157. [ 4.592723] msm_serial: driver initialized
  158. [ 4.603108] loop: module loaded
  159. [ 4.606722] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulatd
  160. [ 4.606767] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, d
  161. [ 4.606780] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator,d
  162. [ 4.606793] ufshcd-hisi ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulatord
  163. [ 4.634950] scsi host0: ufshcd
  164. [ 4.648364] libphy: Fixed MDIO Bus: probed
  165. [ 4.648678] tun: Universal TUN/TAP device driver, 1.6
  166. [ 4.649504] thunder-xcv, ver 1.0
  167. [ 4.649566] thunder-BGX, ver 1.0
  168. [ 4.649598] thunder-nic, ver 1.0
  169. [ 4.649878] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  170. [ 4.649894] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  171. [ 4.649933] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  172. [ 4.649942] igb: Copyright (c) 2007-2014 Intel Corporation.
  173. [ 4.649974] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  174. [ 4.649983] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  175. [ 4.650180] sky2: driver version 1.30
  176. [ 4.650399] usbcore: registered new interface driver asix
  177. [ 4.650483] usbcore: registered new interface driver ax88179_178a
  178. [ 4.650740] VFIO - User Level meta-driver version: 0.3
  179. [ 4.651668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  180. [ 4.651722] ehci-pci: EHCI PCI platform driver
  181. [ 4.651762] ehci-platform: EHCI generic platform driver
  182. [ 4.651843] ehci-orion: EHCI orion driver
  183. [ 4.651901] ehci-exynos: EHCI EXYNOS driver
  184. [ 4.651952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  185. [ 4.651972] ohci-pci: OHCI PCI platform driver
  186. [ 4.652010] ohci-platform: OHCI generic platform driver
  187. [ 4.652071] ohci-exynos: OHCI EXYNOS driver
  188. [ 4.652361] usbcore: registered new interface driver usb-storage
  189. [ 4.652456] usbcore: registered new interface driver usbserial_generic
  190. [ 4.652492] usbserial: USB Serial support registered for generic
  191. [ 4.654667] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
  192. [ 4.655248] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc1
  193. [ 4.655727] i2c /dev entries driver
  194. [ 4.658016] hisi_thermal fff30000.tsensor: failed to register sensor id 1: -19
  195. [ 4.658060] hisi_thermal fff30000.tsensor: failed to register thermal sensor: -19
  196. [ 4.659271] cpu cpu0: failed to get clock: -2
  197. [ 4.659314] cpufreq-dt: probe of cpufreq-dt failed with error -2
  198. [ 4.660375] sdhci: Secure Digital Host Controller Interface driver
  199. [ 4.660399] sdhci: Copyright(c) Pierre Ossman
  200. [ 4.660540] Synopsys Designware Multimedia Card Interface Driver
  201. [ 4.661230] dwmmc_k3 ff37f000.dwmmc1: 'num-slots' was deprecated.
  202. [ 4.661251] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH registt
  203. [ 4.663616] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  204. [ 4.664025] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  205. [ 4.664043] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  206. [ 4.664135] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 56,32 bit host data width,256 deepo
  207. [ 4.664451] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  208. [ 4.687793] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div )
  209. [ 4.705482] ufshcd-hisi ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pw0
  210. [ 4.707690] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  211. [ 4.707731] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH registt
  212. [ 4.710123] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  213. [ 4.710815] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  214. [ 4.710832] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  215. [ 4.710891] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 57,32 bit host data width,256 deepo
  216. [ 4.711767] sdhci-pltfm: SDHCI platform and OF driver helper
  217. [ 4.713297] ledtrig-cpu: registered to indicate activity on CPUs
  218. [ 4.715007] usbcore: registered new interface driver usbhid
  219. [ 4.715039] usbhid: USB HID core driver
  220. [ 4.716063] optee: probing for conduit method from DT.
  221. [ 4.720321] optee: initialized driver
  222. [ 4.720578] usbcore: registered new interface driver snd-usb-audio
  223. [ 4.722492] NET: Registered protocol family 10
  224. [ 4.723284] Segment Routing with IPv6
  225. [ 4.723352] NET: Registered protocol family 17
  226. [ 4.723424] 9pnet: Installing 9P2000 support
  227. [ 4.723520] Key type dns_resolver registered
  228. [ 4.724152] registered taskstats version 1
  229. [ 4.724169] Loading compiled-in X.509 certificates
  230. [ 4.730967] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 19, base_baud = 0) is a PL011 rev2
  231. [ 4.731830] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 20, base_baud = 0) is a PL011 rev2
  232. [ 4.731961] serial serial0: tty port ttyAMA4 registered
  233. [ 4.732354] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 21, base_baud = 0) is a PL011 rev2
  234. [ 4.927212] ufs final power mode: gear = 3, lane = 1, pwr = 1, rate = 2
  235. [ 4.929338] ufshcd-hisi ff3b0000.ufs: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pw2
  236. [ 4.929943] ufshcd-hisi ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability 0
  237. [ 4.930850] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for WN
  238. [ 4.930859] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  239. [ 4.932587] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for WN
  240. [ 4.932593] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  241. [ 4.933353] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for WN
  242. [ 4.933358] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  243. [ 4.934107] scsi 0:0:0:0: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  244. [ 4.934494] sd 0:0:0:0: Power-on or device reset occurred
  245. [ 4.935035] scsi 0:0:0:1: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  246. [ 4.935123] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  247. [ 4.935128] sd 0:0:0:0: [sda] 16384-byte physical blocks
  248. [ 4.935272] sd 0:0:0:0: [sda] Write Protect is off
  249. [ 4.935519] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  250. [ 4.935807] sd 0:0:0:1: Power-on or device reset occurred
  251. [ 4.936348] scsi 0:0:0:2: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  252. [ 4.936638] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  253. [ 4.936642] sd 0:0:0:1: [sdb] 16384-byte physical blocks
  254. [ 4.936761] sd 0:0:0:1: [sdb] Write Protect is off
  255. [ 4.936893] sd 0:0:0:2: Power-on or device reset occurred
  256. [ 4.936930] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  257. [ 4.937354] scsi 0:0:0:3: Direct-Access SAMSUNG KLUBG4G1CE-B0B1 1000 PQ: 0 ANSI: 6
  258. [ 4.938103] sd 0:0:0:3: Power-on or device reset occurred
  259. [ 4.938625] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  260. [ 4.938630] sd 0:0:0:2: [sdc] 16384-byte physical blocks
  261. [ 4.938782] sd 0:0:0:2: [sdc] Write Protect is off
  262. [ 4.939100] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  263. [ 4.939105] sd 0:0:0:3: [sdd] 16384-byte physical blocks
  264. [ 4.939303] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  265. [ 4.939335] sd 0:0:0:3: [sdd] Write Protect is off
  266. [ 4.939800] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  267. [ 4.941886] sd 0:0:0:0: [sda] Attached SCSI disk
  268. [ 4.943532] Alternate GPT is invalid, using primary GPT.
  269. [ 4.943569] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
  270. [ 4.943603] Alternate GPT is invalid, using primary GPT.
  271. [ 4.943615] sdc: sdc1
  272. [ 4.945632] sd 0:0:0:1: [sdb] Attached SCSI disk
  273. [ 4.945834] sd 0:0:0:2: [sdc] Attached SCSI disk
  274. [ 4.946546] sd 0:0:0:3: [sdd] Attached SCSI disk
  275. [ 6.878840] console [ttyAMA6] enabled
  276. [ 6.884091] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  277. [ 6.891316] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to 000000000d8ec8cc
  278. [ 6.900229] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  279. [ 6.908378] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  280. [ 6.915550] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to 0000000094048d01
  281. [ 6.924418] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  282. [ 6.937902] dwmmc_k3 ff3ff000.dwmmc2: 'num-slots' was deprecated.
  283. [ 6.944063] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH registt
  284. [ 6.956228] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  285. [ 6.964168] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  286. [ 6.970541] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  287. [ 6.975902] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 57,32 bit host data width,128 deepo
  288. [ 6.985455] mmc_host mmc1: card is non-removable.
  289. [ 7.091998] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div )
  290. [ 7.119308] input: keys as /devices/platform/keys/input/input0
  291. [ 7.125508] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  292. [ 7.133716] rtc-efi rtc-efi: setting system clock to 1970-01-01 00:00:35 UTC (35)
  293. [ 7.144960] ALSA device list:
  294. [ 7.146547] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000H)
  295. [ 7.148224] mmc1: new SDIO card at address 0001
  296. [ 7.162272] No soundcards found.
  297. [ 7.166339] uart-pl011 fff32000.serial: no DMA platform data
  298. [ 7.172539] Freeing unused kernel memory: 1152K
  299. Loading, please wait...
  300. starting version 232
  301. Begin: Loading essential drivers ... done.
  302. Begin: Running /scripts/init-premount ... done.
  303. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  304. Begin: Running /scripts/local-premount ... [ 7.545831] raid6: int64x1 gen() 497 MB/s
  305. [ 7.617734] raid6: int64x1 xor() 576 MB/s
  306. [ 7.689744] raid6: int64x2 gen() 895 MB/s
  307. [ 7.761722] raid6: int64x2 xor() 860 MB/s
  308. [ 7.833726] raid6: int64x4 gen() 1483 MB/s
  309. [ 7.905975] raid6: int64x4 xor() 1168 MB/s
  310. [ 7.977716] raid6: int64x8 gen() 1656 MB/s
  311. [ 8.049727] raid6: int64x8 xor() 1131 MB/s
  312. [ 8.121758] raid6: neonx1 gen() 939 MB/s
  313. [ 8.193703] raid6: neonx1 xor() 1160 MB/s
  314. [ 8.265738] raid6: neonx2 gen() 1614 MB/s
  315. [ 8.337708] raid6: neonx2 xor() 1837 MB/s
  316. [ 8.409714] raid6: neonx4 gen() 2295 MB/s
  317. [ 8.481706] raid6: neonx4 xor() 2274 MB/s
  318. [ 8.553722] raid6: neonx8 gen() 2471 MB/s
  319. [ 8.625708] raid6: neonx8 xor() 2362 MB/s
  320. [ 8.629981] raid6: using algorithm neonx8 gen() 2471 MB/s
  321. [ 8.635383] raid6: .... xor() 2362 MB/s, rmw enabled
  322. [ 8.640351] raid6: using neon recovery algorithm
  323. [ 8.651258] xor: measuring software checksum speed
  324. [ 8.693715] 8regs : 3534.000 MB/sec
  325. [ 8.737702] 8regs_prefetch: 3150.000 MB/sec
  326. [ 8.781701] 32regs : 4186.000 MB/sec
  327. [ 8.825702] 32regs_prefetch: 3655.000 MB/sec
  328. [ 8.830322] xor: using function: 32regs (4186.000 MB/sec)
  329. [ 8.848640] Btrfs loaded, crc32c=crc32c-generic
  330. Scanning for Btrfs filesystems
  331. done.
  332. Begin: Will now check root file system ... fsck from util-linux 2.29.2
  333. [/sbin/fsck.ext4 (1) -- /dev/sdd10] fsck.ext4 -a -C0 /dev/sdd10
  334. rootfs: clean, 32553/111104 files, 294222/444160 blocks
  335. done.
  336. [ 9.039754] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: (null)
  337. done.
  338. Begin: Running /scripts/local-bottom ... done.
  339. Begin: Running /scripts/init-bottom ... done.
  340. [ 9.150778] systemd[1]: System time before build time, advancing clock.
  341. [ 9.171967] ip_tables: (C) 2000-2006 Netfilter Core Team
  342.  
  343. Welcome to Debian GNU/Linux 9 (stretch)!
  344.  
  345. NetworkManager-wait-online.service: Cannot add dependency job, ignoring: Unit NetworkManager-wait-on.
  346. [ OK ] Listening on Syslog Socket.
  347. [ OK ] Listening on udev Kernel Socket.
  348. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  349. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  350. [ OK ] Listening on Journal Socket.
  351. [ OK ] Reached target Remote File Systems.
  352. [ OK ] Created slice User and Session Slice.
  353. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
  354. [ OK ] Listening on Journal Audit Socket.
  355. [ OK ] Reached target Swap.
  356. [ OK ] Listening on udev Control Socket.
  357. [ OK ] Created slice System Slice.
  358. Starting Load Kernel Modules...
  359. Mounting Huge Pages File System...
  360. Starting Create list of required st�������ce nodes for the current kernel...
  361. [ OK ] Created slice system-getty.slice.
  362. Mounting Debug File System...
  363. Starting Nameserver information manager...
  364. Mounting POSIX Message Queue[ 9.425564] EXT4-fs (sdd10): re-mounted. Opts: (null)
  365. File System...
  366. [ OK ] Created slice system-serial\x2dgetty.slice.
  367. Starting Set the console keyboard layout...
  368. [ OK ] Reached target Slices.
  369. [ OK ] Listening on Journal Socket (/dev/log).
  370. Starting Journal Service...
  371. [ OK ] Listening on fsck to fsckd communication Socket.
  372. Starting Remount Root and Kernel File Systems...
  373. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  374. [ OK ] Reached target Paths.
  375. [ OK ] Reached target Encrypted Volumes.
  376. [ OK ] Mounted Huge Pages File System.
  377. [ OK ] Mounted Debug File System.
  378. [ OK ] Mounted POSIX Message Queue File System.
  379. [ OK ] Started Load Kernel Modules.
  380. [ OK ] Started Create list of required sta��…vice nodes for the current kernel.
  381. Starting Create Static Device Nodes in /dev...
  382. Mounting Configuration File System...
  383. Starting Apply Kernel Variables...
  384. [ OK ] Mounted Configuration File System.
  385. [ OK ] Started Remount Root and Kernel File Systems.
  386. [ OK ] Started Nameserver information manager.
  387. Starting udev Coldplug all Devices...
  388. Starting Load/Save Random Seed...
  389. Starting Install ssh keys...
  390. [ OK ] Started Create Static Device Nodes in /dev.
  391. [ OK ] Started Apply Kernel Variables.
  392. Starting udev Kernel Device Manager...
  393. [ OK ] Started Load/Save Random Seed.
  394. [ OK ] Started Journal Service.
  395. Starting Flush Journal to Persistent Storage...
  396. [ OK ] Started udev Kernel Device Manager.
  397. [ 9.604832] systemd-journald[1732]: Received request to flush runtime journal from PID 1
  398. [ OK ] Started Flush Journal to Persistent Storage.
  399. [ OK ] Started Set the console keyboard layout.
  400. [ OK ] Reached target Local File Systems (Pre).
  401. [ OK ] Started udev Coldplug all Devices.
  402. [ 10.004897] Bluetooth: Core ver 2.22
  403. [ 10.009080] NET: Registered protocol family 31
  404. [ 10.014342] Bluetooth: HCI device and connection manager initialized
  405. [ 10.023600] Bluetooth: HCI socket layer initialized
  406. [ 10.036410] Bluetooth: L2CAP socket layer initialized
  407. [ 10.058657] Bluetooth: SCO socket layer initialized
  408. [ 10.080683] Bluetooth: HCI UART driver ver 2.3
  409. [ 10.087172] Bluetooth: HCI UART protocol H4 registered
  410. [ 10.095384] Bluetooth: HCI UART protocol BCSP registered
  411. [ 10.131009] Bluetooth: HCI UART protocol LL registered
  412. [ 10.131810] uart-pl011 fdf01000.serial: no DMA platform data
  413. [ 10.133204] Bluetooth: HCI UART protocol Three-wire (H5) registered
  414. [ OK ] Found device KLUBG4G1CE-B0B1 BOOT.
  415. Mounting /boot/efi...
  416. [ OK ] Mounted /boot/efi.
  417. [ OK ] Reached target Local File Systems.
  418. Starting Raise network interfaces...
  419. Starting Set console font and keymap...
  420. Starting Create Volatile Files and Directories...
  421. Starting Commit a transient machine-id on disk...
  422. [ OK ] Found device /dev/ttyAMA6.
  423. [ OK ] Started Set console font and keymap.
  424. [ 10.249512] adv7511: probe of 1-0039 failed with error -22
  425. [ OK ] Started Create Volatile Files and Directories.
  426. Starting Update UTMP about System Boot/Shutdown...
  427. Starting Network Time Synchronization...
  428. [ 10.300269] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed 2
  429. [ 10.311772] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32s
  430. [ 10.321194] Bluetooth: hci0: download firmware failed, retrying...
  431. [ OK ] Started Update UTMP about System Boot/Shutdown.
  432. [ OK ] Started Commit a transient machine-id on disk.
  433. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  434. Starting Load/Save RF Kill Switch Status...
  435. [ 10.453140] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed 2
  436. [ 10.466005] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32s
  437. [ 10.475417] Bluetooth: hci0: download firmware failed, retrying...
  438. [ OK ] Started Load/Save RF Kill Switch Status.
  439. [ OK ] Started Network Time Synchronization.
  440. [ OK ] Reached target System Time Synchronized.
  441. [ 10.514219] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  442. [ 10.530780] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  443. [ 10.537900] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  444. [ 10.548219] cfg80211: failed to load regulatory.db
  445. [ 10.570936] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin2
  446. [ 10.583129] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
  447. [ 10.593545] wlcore: WARNING falling back to default config
  448. [ 10.609197] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed 2
  449. [ 10.619560] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32s
  450. [ 10.629282] Bluetooth: hci0: download firmware failed, retrying...
  451. [ OK ] Started Raise network interfaces.
  452. [ 10.765122] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed 2
  453. [ 10.775272] Bluetooth: hci0: request_firmware failed(errno -2) for ti-connectivity/TIInit_11.8.32s
  454. [ 10.784741] Bluetooth: hci0: download firmware failed, retrying...
  455. [ 10.850415] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  456. [ 10.859203] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead.
  457. [ 10.859203]
  458. [ 10.869521] wlcore: WARNING This default nvs file can be removed from the file system
  459. [ 10.869521]
  460. [ 10.892458] wlcore: loaded
  461. Creating SSH2 RSA key; this may take some time ...
  462. 2048 SHA256:vQ4vU4HbUBtRNemGDpwzQgH/lYc8dzGBlYSy75TdsbQ root@linaro-developer (RSA)
  463. Creating SSH2 ECDSA key; this may take some time ...
  464. 256 SHA256:GK1nTdUq0QV95gXyIlk+vMSv7fNrtLKOXAPBdUnkU24 root@linaro-developer (ECDSA)
  465. Creating SSH2 ED25519 key; this may take some time ...
  466. 256 SHA256:omM4447D4NbX6MEaugpqQokwQoABymuD7dVgNcU14xA root@linaro-developer (ED25519)
  467. invoke-rc.d: could not determine current runlevel
  468. Starting OpenBSD Secure Shell server...
  469. [ OK ] Started OpenBSD Secure Shell server.
  470. [ OK ] Started Install ssh keys.
  471. [ OK ] Reached target System Initialization.
  472. [ OK ] Started Trigger anacron every hour.
  473. [ OK ] Started Daily apt download activities.
  474. [ OK ] Started Daily Cleanup of Temporary Directories.
  475. [ OK ] Started Daily apt upgrade and clean activities.
  476. [ OK ] Reached target Timers.
  477. [ OK ] Listening on D-Bus System Message Bus Socket.
  478. [ OK ] Reached target Sockets.
  479. [ OK ] Reached target Basic System.
  480. [ OK ] Started Run anacron jobs.
  481. Starting System Logging Service...
  482. Starting Link to plaform specific files...
  483. [ OK ] Started D-Bus System Message Bus.
  484. Starting Network Manager...
  485. Starting Resize root filesystem to fit available disk space...
  486. Starting Login Service...
  487. Starting Bluetooth service...
  488. [ 14.467284] random: crng init done
  489. Starting Initialize hardware monitoring sensors...
  490. [ OK ] Started Regular background program processing daemon.
  491. Starting LSB: Load kernel modules needed to enable cpufreq scaling...
  492. [ OK ] Started System Logging Service.
  493. [ 14.545954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  494. [ 14.552181] Bluetooth: BNEP filters: protocol multicast
  495. [ 14.557998] Bluetooth: BNEP socket layer initialized
  496. [ OK ] Started Link to plaform specific files.
  497. [ OK ] Started Initialize hardware monitoring sensors.
  498. [ OK ] Started Bluetooth service.
  499. [ OK ] Started Login Service.
  500. Starting Hostname Service...
  501. [ OK ] Reached target Bluetooth.
  502. [ 14.765269] Alternate GPT is invalid, using primary GPT.
  503. [ 14.771576] sdc: sdc1
  504. [ OK ] Started Network Manager.
  505. Starting Network Manager Script Dispatcher Service...
  506. [ OK ] Reached target Network.
  507. [ OK ] Reached target Network is Online.
  508. Starting LSB: Advanced IEEE 802.11 management daemon...
  509. Starting Permit User Sessions...
  510. Starting /etc/rc.local Compatibility...
  511. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
  512. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  513. [ OK ] Started Permit User Sessions.
  514. [ OK ] Started /etc/rc.local Compatibility.
  515. [ OK ] Started Hostname Service.
  516. [ OK ] Started Network Manager Script Dispatcher Service.
  517. [ 15.008728] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  518. [ OK ] Started Serial Getty on ttyAMA6.
  519. [ OK ] Started Getty on tty1.
  520. [ 15.078236] Alternate GPT is invalid, using primary GPT.
  521. [ 15.084221] sdc: sdc1
  522. [ OK ] Reached target Login Prompts.
  523. [ 15.097101] Alternate GPT is invalid, using primary GPT.
  524. [ 15.102753] sdc: sdc1
  525. Starting LSB: set CPUFreq kernel parameters...
  526. [ 15.143958] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div )
  527. [ OK ] Started LSB: set CPUFreq kernel parameters.
  528. [ OK ] Reached target Multi-User System.
  529. [ 15.187297] Alternate GPT is invalid, using primary GPT.
  530. [ 15.188245] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000H)
  531. [ 15.202642] sdc: sdc1
  532. [ OK ] Reached target Graphical Interface.
  533. Starting Update UTMP about System Runlevel Changes...
  534. [ OK ] Started Update UTMP about System Runlevel Changes.
  535. [ 15.606048] wlcore: PHY firmware version: Rev 8.2.0.0.240
  536. [ 15.729028] wlcore: firmware booted (Rev 8.9.0.0.76)
  537. [ 15.772175] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  538. [ 15.779750] Alternate GPT is invalid, using primary GPT.
  539. [ 15.785290] sdc: sdc1
  540. [ 15.785728] wlcore: down
  541. [ 15.916344] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div )
  542. [ 15.965833] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000H)
  543. [ 16.266939] Alternate GPT is invalid, using primary GPT.
  544. [ 16.272469] sdc: sdc1
  545. [ 16.394815] wlcore: PHY firmware version: Rev 8.2.0.0.240
  546. [ 16.503517] wlcore: firmware booted (Rev 8.9.0.0.76)
  547. [ 16.535881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  548. Starting Authorization Manager...
  549. Starting WPA supplicant...
  550. [ OK ] Started Authorization Manager.
  551. [ OK ] Started WPA supplicant.
  552. [ 16.702347] EXT4-fs (sdd10): resizing filesystem from 444160 to 1200128 blocks
  553. [ 16.760317] EXT4-fs (sdd10): resized filesystem to 1200128
  554. [ 16.876865] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  555. [ OK ] Started Resize root filesystem to fit available disk space.
  556.  
  557. Debian GNU/Linux 9 linaro-developer ttyAMA6
  558.  
  559. linaro-developer login: root (automatic login)
  560.  
  561. Linux linaro-developer 4.15-hikey #1 SMP PREEMPT Sat Mar 10 22:41:04 UTC 2018 aarch64
  562.  
  563. The programs included with the Debian GNU/Linux system are free software;
  564. the exact distribution terms for each program are described in the
  565. individual files in /usr/share/doc/*/copyright.
  566.  
  567. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  568. permitted by applicable law.
  569. root@linaro-developer:~#
RAW Paste Data