Advertisement
Guest User

r7800 no 2.4ghz 18.06.6

a guest
Jan 16th, 2020
136
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.14.162 (buildbot@a6cb27977ad2) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7957-d81a8a3e29)) #0 SMP Sun Jan 5 19:06:07 2020
  3. [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Netgear Nighthawk X4S R7800
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] On node 0 totalpages: 122880
  9. [ 0.000000] free_area_init_node: node 0, pgdat c0a27f40, node_mem_map dda39000
  10. [ 0.000000] Normal zone: 960 pages used for memmap
  11. [ 0.000000] Normal zone: 0 pages reserved
  12. [ 0.000000] Normal zone: 122880 pages, LIFO batch:31
  13. [ 0.000000] random: get_random_bytes called from 0xc09008dc with crng_init=0
  14. [ 0.000000] percpu: Embedded 15 pages/cpu s29388 r8192 d23860 u61440
  15. [ 0.000000] pcpu-alloc: s29388 r8192 d23860 u61440 alloc=15*4096
  16. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  17. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121920
  18. [ 0.000000] Kernel command line:
  19. [ 0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8
  20. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  21. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  22. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  23. [ 0.000000] Memory: 477372K/491520K available (4914K kernel code, 162K rwdata, 760K rodata, 1024K init, 235K bss, 14148K reserved, 0K cma-reserved, 0K highmem)
  24. [ 0.000000] Virtual kernel memory layout:
  25. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  26. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  27. [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
  28. [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
  29. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  30. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  31. [ 0.000000] .text : 0xc0208000 - 0xc07ccba8 (5907 kB)
  32. [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
  33. [ 0.000000] .data : 0xc0a00000 - 0xc0a28840 ( 163 kB)
  34. [ 0.000000] .bss : 0xc0a2a000 - 0xc0a64e18 ( 236 kB)
  35. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  36. [ 0.000000] Hierarchical RCU implementation.
  37. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  38. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
  39. [ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
  40. [ 0.000020] Switching to timer-based delay loop, resolution 160ns
  41. [ 0.000224] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
  42. [ 0.000248] pid_max: default: 32768 minimum: 301
  43. [ 0.000373] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.000389] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  45. [ 0.000959] CPU: Testing write buffer coherency: ok
  46. [ 0.001714] Setting up static identity map for 0x42300000 - 0x42300060
  47. [ 0.001872] Hierarchical SRCU implementation.
  48. [ 0.002598] smp: Bringing up secondary CPUs ...
  49. [ 0.004431] smp: Brought up 1 node, 2 CPUs
  50. [ 0.004446] SMP: Total of 2 processors activated (25.00 BogoMIPS).
  51. [ 0.004457] CPU: All CPU(s) started in SVC mode.
  52. [ 0.015091] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
  53. [ 0.015258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  54. [ 0.015284] futex hash table entries: 512 (order: 3, 32768 bytes)
  55. [ 0.015397] pinctrl core: initialized pinctrl subsystem
  56. [ 0.016385] NET: Registered protocol family 16
  57. [ 0.016636] DMA: preallocated 256 KiB pool for atomic coherent allocations
  58. [ 0.017959] cpuidle: using governor ladder
  59. [ 0.018028] cpuidle: using governor menu
  60. [ 0.040566] msm_bus_fabric_init_driver
  61. [ 0.042045] usbcore: registered new interface driver usbfs
  62. [ 0.042125] usbcore: registered new interface driver hub
  63. [ 0.042211] usbcore: registered new device driver usb
  64. [ 0.042266] pps_core: LinuxPPS API ver. 1 registered
  65. [ 0.042279] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  66. [ 0.042313] PTP clock support registered
  67. [ 0.044004] clocksource: Switched to clocksource dg_timer
  68. [ 0.047271] NET: Registered protocol family 2
  69. [ 0.047861] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  70. [ 0.047901] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  71. [ 0.047955] TCP: Hash tables configured (established 4096 bind 4096)
  72. [ 0.048050] UDP hash table entries: 256 (order: 1, 8192 bytes)
  73. [ 0.048075] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  74. [ 0.048254] NET: Registered protocol family 1
  75. [ 0.048300] PCI: CLS 0 bytes, default 64
  76. [ 0.049412] No memory allocated for crashlog
  77. [ 0.049680] workingset: timestamp_bits=30 max_order=17 bucket_order=0
  78. [ 0.054798] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  79. [ 0.054817] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  80. [ 0.061704] io scheduler noop registered
  81. [ 0.061722] io scheduler deadline registered (default)
  82. [ 0.063534] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
  83. [ 0.063639] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
  84. [ 0.063734] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
  85. [ 0.064641] OF: PCI: host bridge /soc/pci@1b500000 ranges:
  86. [ 0.064683] OF: PCI: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
  87. [ 0.064707] OF: PCI: MEM 0x08000000..0x0fdfffff -> 0x08000000
  88. [ 0.172836] qcom-pcie 1b500000.pci: link up
  89. [ 0.172999] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  90. [ 0.173022] pci_bus 0000:00: root bus resource [bus 00-ff]
  91. [ 0.173041] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
  92. [ 0.173057] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
  93. [ 0.173073] pci_bus 0000:00: scanning bus
  94. [ 0.173122] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
  95. [ 0.173206] pci 0000:00:00.0: calling 0xc030d3c0
  96. [ 0.173277] pci 0000:00:00.0: supports D1
  97. [ 0.173287] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  98. [ 0.173304] pci 0000:00:00.0: PME# disabled
  99. [ 0.173562] pci_bus 0000:00: fixups for bus
  100. [ 0.173584] PCI: bus0: Fast back to back transfers disabled
  101. [ 0.173603] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
  102. [ 0.173729] pci_bus 0000:01: scanning bus
  103. [ 0.173907] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
  104. [ 0.174358] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  105. [ 0.174823] pci 0000:01:00.0: calling 0xc030d3c0
  106. [ 0.175465] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  107. [ 0.175506] pci 0000:01:00.0: PME# disabled
  108. [ 0.175841] pci_bus 0000:01: fixups for bus
  109. [ 0.175911] PCI: bus1: Fast back to back transfers disabled
  110. [ 0.175927] pci_bus 0000:01: bus scan returning with max=01
  111. [ 0.175947] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
  112. [ 0.175964] pci_bus 0000:00: bus scan returning with max=ff
  113. [ 0.176010] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
  114. [ 0.176034] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
  115. [ 0.176165] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  116. [ 0.176188] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
  117. [ 0.176219] pci 0000:00:00.0: calling 0xc055677c
  118. [ 0.176411] pcieport 0000:00:00.0: assign IRQ: got 67
  119. [ 0.176717] pcieport 0000:00:00.0: AER enabled with IRQ 35
  120. [ 0.176831] pci 0000:01:00.0: calling 0xc055677c
  121. [ 0.177240] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
  122. [ 0.177344] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
  123. [ 0.177450] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
  124. [ 0.178235] OF: PCI: host bridge /soc/pci@1b700000 ranges:
  125. [ 0.178271] OF: PCI: IO 0x31e00000..0x31efffff -> 0x31e00000
  126. [ 0.178293] OF: PCI: MEM 0x2e000000..0x31dfffff -> 0x2e000000
  127. [ 1.212096] qcom-pcie 1b700000.pci: phy link never came up
  128. [ 1.214085] qcom-pcie 1b700000.pci: cannot initialize host
  129. [ 1.214875] qcom-pcie: probe of 1b700000.pci failed with error -110
  130. [ 1.217038] L2 @ QSB rate. Forcing new rate.
  131. [ 1.217247] L2 @ 384000 KHz
  132. [ 1.217421] CPU0 @ 800000 KHz
  133. [ 1.217434] CPU1 @ QSB rate. Forcing new rate.
  134. [ 1.217559] CPU1 @ 384000 KHz
  135. [ 1.221429] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
  136. [ 1.223376] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  137. [ 1.226075] msm_serial 16340000.serial: msm_serial: detected port #0
  138. [ 1.226175] msm_serial 16340000.serial: uartclk = 7372800
  139. [ 1.226260] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
  140. [ 1.226302] msm_serial: console setup on port #0
  141. [ 1.898211] console [ttyMSM0] enabled
  142. [ 1.902929] msm_serial: driver initialized
  143. [ 1.911480] loop: module loaded
  144. [ 1.913512] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xa1
  145. [ 1.913547] nand: Micron MT29F1G08ABBEAH4
  146. [ 1.920116] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  147. [ 1.924034] 8 fixed-partitions partitions found on MTD device qcom_nand.0
  148. [ 1.931484] Creating 8 MTD partitions on "qcom_nand.0":
  149. [ 1.938340] 0x000000000000-0x000000c80000 : "qcadata"
  150. [ 1.948362] random: fast init done
  151. [ 1.966157] 0x000000c80000-0x000001180000 : "APPSBL"
  152. [ 1.975745] 0x000001180000-0x000001200000 : "APPSBLENV"
  153. [ 1.977384] 0x000001200000-0x000001340000 : "art"
  154. [ 1.982737] 0x000001340000-0x000001480000 : "artbak"
  155. [ 1.987647] 0x000001480000-0x000001880000 : "kernel"
  156. [ 1.997452] 0x000001880000-0x000007900000 : "ubi"
  157. [ 2.167173] 0x000007900000-0x000008000000 : "reserve"
  158. [ 2.181307] libphy: GPIO Bitbanged MDIO: probed
  159. [ 2.202514] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
  160. [ 3.065704] libphy: Fixed MDIO Bus: probed
  161. [ 3.067880] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
  162. [ 3.069012] stmmac - user ID: 0x10, Synopsys ID: 0x37
  163. [ 3.075289] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
  164. [ 3.080242] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
  165. [ 3.086409] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
  166. [ 3.094362] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
  167. [ 3.101859] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
  168. [ 3.108958] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
  169. [ 3.116879] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
  170. [ 3.122604] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
  171. [ 3.130080] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  172. [ 3.138551] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
  173. [ 3.145622] stmmac - user ID: 0x10, Synopsys ID: 0x37
  174. [ 3.151681] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
  175. [ 3.156798] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
  176. [ 3.162795] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
  177. [ 3.170842] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
  178. [ 3.178401] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
  179. [ 3.185431] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
  180. [ 3.193259] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
  181. [ 3.199146] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
  182. [ 3.206520] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  183. [ 3.213899] i2c /dev entries driver
  184. [ 3.222730] Calibration not found.
  185. [ 3.226261] Speed bin: 0
  186. [ 3.228496] PVS bin: 4
  187. [ 3.232507] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  188. [ 3.233430] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  189. [ 3.241172] sdhci: Secure Digital Host Controller Interface driver
  190. [ 3.247956] sdhci: Copyright(c) Pierre Ossman
  191. [ 3.254106] sdhci-pltfm: SDHCI platform and OF driver helper
  192. [ 3.260157] NET: Registered protocol family 10
  193. [ 3.265695] Segment Routing with IPv6
  194. [ 3.268594] NET: Registered protocol family 17
  195. [ 3.272304] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  196. [ 3.277169] 8021q: 802.1Q VLAN Support v1.8
  197. [ 3.289816] Registering SWP/SWPB emulation handler
  198. [ 3.306189] qcom_rpm 108000.rpm: RPM firmware 3.0.16777364
  199. [ 3.318288] s1a: supplied by regulator-dummy
  200. [ 3.318377] s1a: Bringing 0uV into 1050000-1050000uV
  201. [ 3.321885] s1b: supplied by regulator-dummy
  202. [ 3.326717] s1b: Bringing 0uV into 1050000-1050000uV
  203. [ 3.331077] s2a: supplied by regulator-dummy
  204. [ 3.335912] s2a: Bringing 0uV into 775000-775000uV
  205. [ 3.340261] s2b: supplied by regulator-dummy
  206. [ 3.344769] s2b: Bringing 0uV into 775000-775000uV
  207. [ 3.353873] UBI: auto-attach mtd6
  208. [ 3.353905] ubi0: attaching mtd6
  209. [ 3.405487] random: crng init done
  210. [ 4.059463] ubi0: scanning is finished
  211. [ 4.068800] ubi0: attached mtd6 (name "ubi", size 96 MiB)
  212. [ 4.068820] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  213. [ 4.073169] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  214. [ 4.080023] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  215. [ 4.086852] ubi0: good PEBs: 771, bad PEBs: 1, corrupted PEBs: 0
  216. [ 4.093565] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  217. [ 4.099880] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 226406913
  218. [ 4.106907] ubi0: available PEBs: 0, total reserved PEBs: 771, PEBs reserved for bad PEB handling: 19
  219. [ 4.116054] ubi0: background thread "ubi_bgt0d" started, PID 61
  220. [ 4.125813] block ubiblock0_0: created from ubi0:0(rootfs)
  221. [ 4.130892] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  222. [ 4.136526] hctosys: unable to open rtc device (rtc0)
  223. [ 4.148680] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  224. [ 4.150706] Freeing unused kernel memory: 1024K
  225. [ 4.715437] init: Console is alive
  226. [ 4.715635] init: - watchdog -
  227. [ 5.404379] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  228. [ 5.472890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  229. [ 5.474429] SCSI subsystem initialized
  230. [ 5.480070] libata version 3.00 loaded.
  231. [ 5.481938] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
  232. [ 5.482057] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  233. [ 5.487604] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
  234. [ 5.496738] scsi host0: ahci
  235. [ 5.504535] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 26
  236. [ 5.836781] ata1: SATA link down (SStatus 0 SControl 300)
  237. [ 5.839955] ehci-platform: EHCI generic platform driver
  238. [ 5.846891] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  239. [ 5.847768] ohci-platform: OHCI generic platform driver
  240. [ 5.982452] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  241. [ 5.982531] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  242. [ 5.987253] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
  243. [ 5.994598] xhci-hcd xhci-hcd.0.auto: irq 104, io mem 0x11000000
  244. [ 6.004487] hub 1-0:1.0: USB hub found
  245. [ 6.010038] hub 1-0:1.0: 1 port detected
  246. [ 6.013836] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  247. [ 6.017719] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  248. [ 6.022950] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  249. [ 6.030639] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  250. [ 6.037477] hub 2-0:1.0: USB hub found
  251. [ 6.045504] hub 2-0:1.0: 1 port detected
  252. [ 6.049212] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  253. [ 6.053076] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
  254. [ 6.058552] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
  255. [ 6.065993] xhci-hcd xhci-hcd.1.auto: irq 105, io mem 0x10000000
  256. [ 6.075737] hub 3-0:1.0: USB hub found
  257. [ 6.081558] hub 3-0:1.0: 1 port detected
  258. [ 6.085337] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  259. [ 6.089182] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
  260. [ 6.094528] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  261. [ 6.102093] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  262. [ 6.109006] hub 4-0:1.0: USB hub found
  263. [ 6.117074] hub 4-0:1.0: 1 port detected
  264. [ 6.122007] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  265. [ 6.129621] init: - preinit -
  266. [ 7.799575] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
  267. [ 7.800696] dwmac1000: Master AXI performs any burst length
  268. [ 7.808560] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  269. [ 7.813967] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
  270. [ 7.823365] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  271. [ 8.875000] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
  272. [ 8.876824] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  273. [ 10.992897] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 142
  274. [ 12.184393] UBIFS (ubi0:1): recovery needed
  275. [ 14.164381] UBIFS (ubi0:1): recovery completed
  276. [ 14.164498] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  277. [ 14.167714] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  278. [ 14.175693] UBIFS (ubi0:1): FS size: 90533888 bytes (86 MiB, 713 LEBs), journal size 4571136 bytes (4 MiB, 36 LEBs)
  279. [ 14.185599] UBIFS (ubi0:1): reserved for root: 4276138 bytes (4175 KiB)
  280. [ 14.195842] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 9881DEEA-2494-4541-8135-706F471354C6, small LPT model
  281. [ 14.206960] mount_root: switching to ubifs overlay
  282. [ 14.247160] urandom-seed: Seeding with /etc/urandom.seed
  283. [ 14.363116] procd: - early -
  284. [ 14.363264] procd: - watchdog -
  285. [ 15.019167] procd: - watchdog -
  286. [ 15.019674] procd: - ubus -
  287. [ 15.072155] procd: - init -
  288. [ 15.215371] kmodloader: loading kernel modules from /etc/modules.d/*
  289. [ 15.218506] ip6_tables: (C) 2000-2006 Netfilter Core Team
  290. [ 15.226312] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
  291. [ 15.226339] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
  292. [ 15.235087] ip_tables: (C) 2000-2006 Netfilter Core Team
  293. [ 15.244236] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
  294. [ 15.282107] xt_time: kernel timezone is -0000
  295. [ 15.306360] PPP generic driver version 2.4.2
  296. [ 15.307111] NET: Registered protocol family 24
  297. [ 15.313980] ath10k_pci 0000:01:00.0: assign IRQ: got 67
  298. [ 15.314580] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
  299. [ 15.314660] ath10k_pci 0000:01:00.0: enabling bus mastering
  300. [ 15.315115] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  301. [ 15.498209] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
  302. [ 15.498246] ath10k_pci 0000:01:00.0: Falling back to user helper
  303. [ 15.544624] firmware ath10k!QCA9984!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
  304. [ 15.899917] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
  305. [ 15.899949] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
  306. [ 15.910767] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32 4c56a386
  307. [ 18.185080] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:1 crc32 dd6d039c
  308. [ 24.077083] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
  309. [ 24.167681] ath: EEPROM regdomain: 0x0
  310. [ 24.167692] ath: EEPROM indicates default country code should be used
  311. [ 24.167701] ath: doing EEPROM country->regdmn map search
  312. [ 24.167715] ath: country maps to regdmn code: 0x3a
  313. [ 24.167727] ath: Country alpha2 being used: US
  314. [ 24.167734] ath: Regpair used: 0x3a
  315. [ 24.174070] kmodloader: done loading kernel modules from /etc/modules.d/*
  316. [ 28.262847] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
  317. [ 28.264240] dwmac1000: Master AXI performs any burst length
  318. [ 28.271879] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  319. [ 28.277349] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
  320. [ 28.286369] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  321. [ 28.304050] br-lan: port 1(eth1.1) entered blocking state
  322. [ 28.304082] br-lan: port 1(eth1.1) entered disabled state
  323. [ 28.308821] device eth1.1 entered promiscuous mode
  324. [ 28.313813] device eth1 entered promiscuous mode
  325. [ 28.320653] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  326. [ 28.332064] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
  327. [ 28.333049] dwmac1000: Master AXI performs any burst length
  328. [ 28.341124] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  329. [ 28.346610] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
  330. [ 28.355963] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  331. [ 28.366009] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
  332. [ 29.354456] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
  333. [ 29.355733] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  334. [ 29.362845] br-lan: port 1(eth1.1) entered blocking state
  335. [ 29.368481] br-lan: port 1(eth1.1) entered forwarding state
  336. [ 29.374124] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  337. [ 29.434583] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  338. [ 29.434666] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  339. [ 29.443558] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Advertisement
RAW Paste Data Copied
Advertisement