<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.4.0-twrp-klte-unified-1.7 (jc@gallifrey) (gcc version 4.9.4 20151028 (prerelease) (Linaro GCC 4.9-2016.02) ) #1 SMP PREEMPT Tue May 24 00:10:55 EDT 2016
<4>[    0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: SAMSUNG K PROJECT REV14
<6>[    0.000000] Recovery Boot Mode
<6>[    0.000000] qcom,ion-heap@28 reserved EBI1 size 614000
<6>[    0.000000] qcom,ion-heap@30 reserved EBI1 size 9600000
<6>[    0.000000] qcom,mdss_fb_primary reserved EBI1 size 1f00000
<6>[    0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-4100000
<6>[    0.000000] Node qcom,wdt@f9017000 memblock_reserve memory 0-4000
<6>[    0.000000] qcom,msm-rtb reserved EBI1 size 100000
<6>[    0.000000] qcom,msm-contig-mem reserved EBI1 size 280000
<6>[    0.000000] Node qcom,msm-mem-hole removed memory 4d00000-d200000
<6>[    0.000000] Node qcom,msm-mem-hole removed memory fa00000-10200000
<6>[    0.000000] Initialized persistent memory from 7fa00000-7fafffff
<6>[    0.000000] memory pool 3 (start 0x73b00000 size bf00000) initialized
<6>[    0.000000] cma: CMA: reserved 16 MiB at 2a800000
<6>[    0.000000] cma: Found secure_region, memory base 0, size 165 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 168 MiB at 69000000
<6>[    0.000000] cma: Found adsp_region, memory base 0, size 75 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 76 MiB at 64400000
<6>[    0.000000] cma: Found qsecom_region, memory base 0, size 17 MiB, limit 0xffffffff
<6>[    0.000000] cma: CMA: reserved 20 MiB at 63000000
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[    0.000000] IMEM DT static mapping successful
<7>[    0.000000] On node 0 totalpages: 439296
<7>[    0.000000] free_area_init_node: node 0, pgdat c0fcaec0, node_mem_map cd200000
<7>[    0.000000]   Normal zone: 1398 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 141450 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 2698 pages used for memmap
<7>[    0.000000]   HighMem zone: 293750 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @ce252000 s16000 r0 d12672 u32768
<7>[    0.000000] pcpu-alloc: s16000 r0 d12672 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 435200
<5>[    0.000000] Kernel command line: console=null androidboot.hardware=qcom androidboot.bootdevice=msm_sdcc.1 user_debug=31 msm_rtb.filter=0x3F androidboot.sec_atd.tty=/dev/ttyHSL0 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debug.reset_reason=0x0 mdss_mdp.panel=1:dsi:0:mdss_dsi_samsung_1080p_cmd_fa2 lcd_id=0x602813 Panelres=1 pmic_info=3 androidboot.debug_level=0x4f4c sec_debug.enable=0 sec_debug.enable_user=0 androidboot.cp_debug_level=0x55FF sec_debug.enable_cp_debug=0 cordon=199301213f43f6b27a00a252bb55cb92 connie=SM-G900W8_OPEN_CAN_b73781c5234cca1ae44ec0d18f7954cf sysscope=0xee000000 loglevel=4 samsung.hardware=SM-G900W8 androidboot.revision=14 androidboot.emmc_checksum=3 androidboot.warranty_bit=1 fg_reset=0 androidboot.bootloader=G900W8VLS1DPF3 androidboot.nvdata_backup=0 androidboot.boot_recovery=1 uart_dbg=0 sec_debug.pmc8974_rev=2 vmalloc=450m level=0x574f4c44 androidboot.emmc=true androidboot.serialno=3d7d63d7 androidboot.baseband=msm
<0>[    0.000000] sec_dbg_setup: str=@0x10100008
<0>[    0.000000] sec_dbg_setup: secdbg_paddr = 0x10100008
<0>[    0.000000] sec_dbg_setup: secdbg_size = 0x80000
<6>[    0.000000] get_lcd_id_cmdline: LCD_ID = 0x602813, lcd_attached =1
<6>[    0.000000] lcd_panel_info k FHD LSI
<6>[    0.000000] /home/jc/build/nethunter-kernel/klte/drivers/extcon/extcon-max77804k.c get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:0
<6>[    0.000000] sec_bat_get_fg_reset, fg_reset:0
<6>[    0.000000] get_lpm_mode:not lpm mode
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 77MB 40MB 1593MB 6MB = 1716MB total
<5>[    0.000000] Memory: 1412148k/1412148k available, 540620k reserved, 914432K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000] 	   vmalloc : 0xec000000 - 0xff000000   ( 304 MB)
<5>[    0.000000] 	    lowmem : 0xd0200000 - 0xebb00000   ( 441 MB)
<5>[    0.000000] 	   vmalloc : 0xcfa00000 - 0xd0200000   (   8 MB)
<5>[    0.000000] 	    lowmem : 0xcd200000 - 0xcfa00000   (  40 MB)
<5>[    0.000000] 	   vmalloc : 0xc4d00000 - 0xcd200000   ( 133 MB)
<5>[    0.000000] 	    lowmem : 0xc0000000 - 0xc4d00000   (  77 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0d98274   (13889 kB)
<5>[    0.000000]       .init : 0xc0e00000 - 0xc0f0de80   (1080 kB)
<5>[    0.000000]       .data : 0xc0f0e000 - 0xc0fcfeac   ( 776 kB)
<5>[    0.000000]        .bss : 0xc0fcfed0 - 0xc166d49c   (6774 kB)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
<6>[    0.000000] Switching to timer-based delay loop
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000079] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
<6>[    0.000096] pid_max: default: 32768 minimum: 301
<6>[    0.000224] Security Framework initialized
<6>[    0.000237] SELinux:  Initializing.
<7>[    0.000284] SELinux:  Starting in permissive mode
<6>[    0.000335] Mount-cache hash table entries: 512
<6>[    0.001032] Initializing cgroup subsys cpuacct
<6>[    0.001043] Initializing cgroup subsys freezer
<6>[    0.001079] CPU: Testing write buffer coherency: ok
<6>[    0.001242] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001301] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[    0.003831] Setting up static identity map for 0x998200 - 0x998288
<6>[    0.003844] MSM Memory Dump table set up
<3>[    0.003854] set_dload_mode <1> ( c0e0d468 )
<6>[    0.005182] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.005911] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<6>[    0.006630] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[    0.006706] Brought up 4 CPUs
<6>[    0.006718] SMP: Total of 4 processors activated (153.60 BogoMIPS).
<6>[    0.018088] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 1
<4>[    0.018111] ------------[ cut here ]------------
<4>[    0.018121] WARNING: at /home/jc/build/nethunter-kernel/klte/fs/proc/generic.c:323 0xc028aeb8()
<4>[    0.018130] name 'cpu/vfp_bounce'
<4>[    0.018145] Function entered at [<c010b440>] from [<c01932e8>]
<4>[    0.018155] Function entered at [<c01932e8>] from [<c0193358>]
<4>[    0.018165] Function entered at [<c0193358>] from [<c028aeb8>]
<4>[    0.018176] Function entered at [<c028aeb8>] from [<c028af18>]
<4>[    0.018185] Function entered at [<c028af18>] from [<c028b1f4>]
<4>[    0.018194] Function entered at [<c028b1f4>] from [<c0e030bc>]
<4>[    0.018204] Function entered at [<c0e030bc>] from [<c0e00c08>]
<4>[    0.018213] Function entered at [<c0e00c08>] from [<c0e00dc0>]
<4>[    0.018222] Function entered at [<c0e00dc0>] from [<c01063f8>]
<4>[    0.018248] ---[ end trace da227214a82491b7 ]---
<3>[    0.018257] Failed to create procfs node for VFP bounce reporting
<6>[    0.018329] [suspend helper] suspend_helper_init: init done
<6>[    0.018609] dummy:
<6>[    0.030392] NET: Registered protocol family 16
<6>[    0.033526] DMA: preallocated 256 KiB pool for atomic coherent allocations
<0>[    0.035479] sec_debug_init: enable=0
<0>[    0.035489] sec_debug_init:__raw_readl restart_reason=2003195138
<0>[    0.035499] sec_debug_init: restart_reason : 0xfa00a65c
<6>[    0.035910] KPI: Bootloader start count = 29355
<6>[    0.035919] KPI: Bootloader end count = 88277
<6>[    0.035926] KPI: Bootloader display count = 66214
<6>[    0.035934] KPI: Bootloader load kernel count = 1897
<6>[    0.035943] KPI: Kernel MPM timestamp = 172850
<6>[    0.035950] KPI: Kernel MPM Clock frequency = 32768
<6>[    0.035965] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536
<6>[    0.035971]  accessory_chip=0, hw_plat_subtype=1, pmic_model=65542, pmic_die_revision=131073
<6>[    0.036628] persistent_ram: found existing buffer, size 19672, start 19672
<6>[    0.083522] console [ram-1] enabled
<6>[    0.097277] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
<6>[    0.111723] WDOG_V2 handled by TZ:dump @0xea504000 PA:2a504000
<6>[    0.111774] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
<6>[    0.133390] 8084_s1: 675 <--> 1050 mV at 0 mV normal idle
<6>[    0.133773] 8084_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
<6>[    0.134141] 8084_s1_so: 675 <--> 1050 mV at 675 mV normal idle
<6>[    0.134543] 8084_s2: 500 <--> 1050 mV at 0 mV normal idle
<6>[    0.134912] 8084_s2_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.135285] 8084_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.135645] 8084_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.136058] 8084_s3: 1300 mV normal idle
<6>[    0.136437] 8084_s4: 1800 mV normal idle
<6>[    0.136821] 8084_s5: 2150 mV normal idle
<6>[    0.137198] 8084_s6: 1050 mV normal idle
<6>[    0.137575] 8084_s7: 815 <--> 900 mV at 0 mV normal idle
<6>[    0.137947] 8084_s7_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.138301] 8084_s7_floor_corner: 0 <--> 0 mV at 0 mV normal idle
<6>[    0.138710] 8084_l1: 1225 mV normal idle
<6>[    0.139097] 8084_l2: 1200 mV normal idle
<6>[    0.139483] 8084_l3: 1050 <--> 1200 mV at 1200 mV normal idle
<6>[    0.139865] 8084_l4: 1200 <--> 1225 mV at 1225 mV normal idle
<6>[    0.140251] 8084_l5: 1800 mV normal idle
<6>[    0.140636] 8084_l6: 1800 mV normal idle
<6>[    0.141032] 8084_l7: 1800 mV normal idle
<6>[    0.141401] 8084_l8: 1800 mV normal idle
<6>[    0.141820] 8084_l9: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.142208] 8084_l10: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.142598] 8084_l11: 1300 mV normal idle
<6>[    0.142990] 8084_l12: 1800 mV normal idle
<6>[    0.143347] 8084_l12_ao: 1800 mV normal idle
<6>[    0.143743] 8084_l13: 1800 <--> 2950 mV at 2950 mV normal idle
<6>[    0.144133] 8084_l14: 1800 mV normal idle
<6>[    0.144523] 8084_l15: 2050 mV normal idle
<6>[    0.144910] 8084_l16: 2700 mV normal idle
<6>[    0.145317] 8084_l17: 2850 mV normal idle
<6>[    0.145703] 8084_l18: 2850 mV normal idle
<6>[    0.146101] 8084_l19: 2900 <--> 3300 mV at 2900 mV normal idle
<6>[    0.146496] 8084_l20: 2950 mV normal idle
<6>[    0.146918] 8084_l21: 2950 mV normal idle
<6>[    0.147310] 8084_l22: 3000 <--> 3300 mV at 3000 mV normal idle
<6>[    0.147691] 8084_l23: 3000 mV normal idle
<6>[    0.148072] 8084_l24: 3075 mV normal idle
<6>[    0.148451] 8084_l25: 2100 mV normal idle
<6>[    0.148833] 8084_l26: 1800 <--> 2050 mV at 2050 mV normal idle
<6>[    0.149211] 8084_l27: 1000 <--> 1225 mV at 1200 mV normal idle
<6>[    0.149603] 8084_lvs1:
<6>[    0.149939] 8084_lvs2:
<6>[    0.150286] 8084_lvs3:
<6>[    0.150624] 8084_lvs4:
<6>[    0.152967] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
<6>[    0.152978] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
<6>[    0.153259] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.153692] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.154117] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.154528] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
<6>[    0.182971] msm-thermal qcom,msm-thermal.74: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
<6>[    0.182990] msm-thermal qcom,msm-thermal.74: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
<6>[    0.183769] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
<6>[    0.183943] msm-thermal qcom,msm-thermal.74: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
<3>[    0.184073] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<4>[    0.184686] 8084_l18: Failed to create debugfs directory
<4>[    0.184706] 8084_lvs1: Failed to create debugfs directory
<6>[    0.186582] sensor_hub_init: power on
<6>[    0.186611] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.186622] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.188452] 8084_mvs1:
<6>[    0.192330] sps:BAM 0xf9984000 (va:0xc4ee0000) enabled: ver:0x6, number of pipes:20
<6>[    0.192342] sps:BAM 0xf9984000 is registered.
<6>[    0.192356] sps:sps is ready.
<6>[    0.194979] gdsc_venus:
<6>[    0.195254] gdsc_mdss:
<6>[    0.195569] gdsc_jpeg:
<6>[    0.195903] gdsc_vfe:
<6>[    0.196153] gdsc_oxili_gx:
<6>[    0.196214] gdsc_oxili_gx: supplied by 8084_s7_corner
<6>[    0.196491] gdsc_oxili_cx:
<6>[    0.196717] gdsc_usb_hsic:
<3>[    0.197317] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[    0.202764] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5200000
<6>[    0.203308] Physical OCMEM zone layout:
<6>[    0.203319]  zone graphics	: 0xfec00000 - 0xfecfffff (1024 KB)
<6>[    0.203331]  zone lp_audio	: 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.203343]  zone video	: 0xfed00000 - 0xfed7ffff ( 512 KB)
<6>[    0.222800] bio: create slab <bio-0> at 0
<6>[    0.223559] ethernet_phy:
<6>[    0.223812] vph_pwr:
<6>[    0.224156] max77826_module_init
<6>[    0.225145] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
<3>[    0.225229] ION-heap mm: Cannot specify alignment for this type of heap
<6>[    0.225528] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
<3>[    0.225607] ION-heap adsp: Cannot specify alignment for this type of heap
<6>[    0.225788] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
<6>[    0.226486] ION heap iommuca created
<6>[    0.226526] ION heap system created
<6>[    0.226635] ION heap kmalloc created
<6>[    0.226663] ION heap mm created at 0x69000000 with size a500000
<6>[    0.226687] ION heap adsp created at 0x64400000 with size 4b00000
<6>[    0.226710] ION heap qsecom created at 0x63000000 with size 1100000
<6>[    0.226791] ION heap audio created at 0x73b00000 with size 614000
<6>[    0.226828] ION heap pil_1 created at 0x04d00000 with size 1d00000
<6>[    0.226853] ION heap pil_2 created at 0x08000000 with size 5100000
<6>[    0.227172] ION heap camera_preview created at 0x74114000 with size 9600000
<5>[    0.228641] SCSI subsystem initialized
<6>[    0.228745] usbcore: registered new interface driver usbfs
<6>[    0.228797] usbcore: registered new interface driver hub
<6>[    0.228899] usbcore: registered new device driver usb
<6>[    0.229837] max77804k 13-0066: max77804k_i2c_probe
<6>[    0.230138] of_max77804k_dt: irq-gpio: 102
<6>[    0.230146] of_max77804k_dt: irq-base: 306
<6>[    0.230154] of_max77804k_dt: wc-irq-gpio: 0
<6>[    0.230164] of_max77804k_dt: timeout: 0
<6>[    0.230171] of_max77804k_dt: duty: 0
<6>[    0.230178] of_max77804k_dt: period: 0
<6>[    0.230185] of_max77804k_dt: pwm_id: 0
<6>[    0.230628] max77804k_i2c_probe: device found: rev.0x3, ver.0x0
<6>[    0.231528] func: max77804k_irq_init, irq_gpio: 102, irq_base: 306
<6>[    0.293563] max77804k-safeout max77804k-safeout: max77804k_pmic_probe
<6>[    0.293576] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:496] pdata->num_regulators:3
<6>[    0.293588] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.293673] regulator regulator.61: func:max77804k_reg_enable
<6>[    0.294436] regulator regulator.61: func:max77804k_get_voltage
<6>[    0.294446] regulator regulator.61: func:max77804k_get_voltage_register
<6>[    0.294882] regulator regulator.61: func:max77804k_list_voltage_safeout
<6>[    0.294894] safeout1 range: at 4900 mV
<6>[    0.294903] regulator regulator.61: func:max77804k_get_voltage
<6>[    0.294912] regulator regulator.61: func:max77804k_get_voltage_register
<6>[    0.295348] regulator regulator.61: func:max77804k_list_voltage_safeout
<3>[    0.295451] Error-Bad Function Input
<6>[    0.295666] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.295750] regulator regulator.62: func:max77804k_get_voltage
<6>[    0.295760] regulator regulator.62: func:max77804k_get_voltage_register
<6>[    0.296199] regulator regulator.62: func:max77804k_list_voltage_safeout
<6>[    0.296210] safeout2 range: at 4900 mV
<6>[    0.296218] regulator regulator.62: func:max77804k_get_voltage
<6>[    0.296227] regulator regulator.62: func:max77804k_get_voltage_register
<6>[    0.296663] regulator regulator.62: func:max77804k_list_voltage_safeout
<3>[    0.296745] Error-Bad Function Input
<6>[    0.296863] [/home/jc/build/nethunter-kernel/klte/drivers/regulator/max77804k-regulator.c:502] for in pdata->num_regulators:3
<6>[    0.296940] regulator regulator.63: func:max77804k_reg_enable
<6>[    0.297702] regulator regulator.63: func:max77804k_get_voltage
<6>[    0.297712] regulator regulator.63: func:max77804k_get_voltage_register
<6>[    0.298148] regulator regulator.63: func:max77804k_list_voltage
<6>[    0.298158] CHARGER: 60 <--> 2580 mA at 360 mA
<6>[    0.299168] i2c-gpio i2c.87: using pins 60 (SDA) and 61 (SCL)
<6>[    0.299629] i2c-gpio i2c.88: using pins 87 (SDA) and 88 (SCL)
<6>[    0.299971] max77826_i2c_probe
<6>[    0.299981] max77826_i2c_probe: pdata
<6>[    0.300419] max77826_i2c_probe: DEVICE_ID: 0x2
<6>[    0.300500] max77826_get_voltage_register: id=0, reg=0x20, shift=0x0, mask=0x7f
<6>[    0.300939] max77826_ldo_set_voltage: id=0, reg=0x20, mask=0x7f, val=0x30, new=0x30
<6>[    0.301698] max77826_ldo1: 1200 mV normal
<6>[    0.301708] max77826_get_voltage_register: id=0, reg=0x20, shift=0x0, mask=0x7f
<6>[    0.302362] max77826_get_voltage_register: id=1, reg=0x21, shift=0x0, mask=0x7f
<6>[    0.302801] max77826_ldo_set_voltage: id=1, reg=0x21, mask=0x7f, val=0x20, new=0x20
<6>[    0.303560] max77826_ldo2: 1000 mV normal
<6>[    0.303570] max77826_get_voltage_register: id=1, reg=0x21, shift=0x0, mask=0x7f
<6>[    0.304193] max77826_get_voltage_register: id=2, reg=0x22, shift=0x0, mask=0x7f
<6>[    0.304632] max77826_ldo_set_voltage: id=2, reg=0x22, mask=0x7f, val=0x30, new=0x30
<6>[    0.305390] max77826_ldo3: 1200 mV normal
<6>[    0.305400] max77826_get_voltage_register: id=2, reg=0x22, shift=0x0, mask=0x7f
<6>[    0.306022] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    0.306461] max77826_ldo_set_voltage: id=3, reg=0x23, mask=0x7f, val=0x28, new=0x28
<6>[    0.307220] max77826_ldo4: 1800 mV normal
<6>[    0.307229] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    0.307846] max77826_get_voltage_register: id=4, reg=0x24, shift=0x0, mask=0x7f
<6>[    0.308285] max77826_ldo_set_voltage: id=4, reg=0x24, mask=0x7f, val=0x28, new=0x28
<6>[    0.309043] max77826_ldo5: 1800 mV normal
<6>[    0.309053] max77826_get_voltage_register: id=4, reg=0x24, shift=0x0, mask=0x7f
<6>[    0.309687] max77826_get_voltage_register: id=5, reg=0x25, shift=0x0, mask=0x7f
<6>[    0.310125] max77826_ldo6: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.310135] max77826_get_voltage_register: id=5, reg=0x25, shift=0x0, mask=0x7f
<6>[    0.310754] max77826_get_voltage_register: id=6, reg=0x26, shift=0x0, mask=0x7f
<6>[    0.311193] max77826_ldo_set_voltage: id=6, reg=0x26, mask=0x7f, val=0x28, new=0x28
<6>[    0.311980] max77826_ldo7: 1800 mV normal
<6>[    0.311990] max77826_get_voltage_register: id=6, reg=0x26, shift=0x0, mask=0x7f
<6>[    0.312620] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    0.313059] max77826_ldo8: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.313069] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    0.313688] max77826_get_voltage_register: id=8, reg=0x28, shift=0x0, mask=0x7f
<6>[    0.314127] max77826_ldo_set_voltage: id=8, reg=0x28, mask=0x7f, val=0x28, new=0x28
<6>[    0.314885] max77826_ldo9: 1800 mV normal
<6>[    0.314895] max77826_get_voltage_register: id=8, reg=0x28, shift=0x0, mask=0x7f
<6>[    0.315525] max77826_get_voltage_register: id=9, reg=0x29, shift=0x0, mask=0x7f
<6>[    0.315965] max77826_ldo10: 2800 <--> 2950 mV at 2800 mV normal
<6>[    0.315975] max77826_get_voltage_register: id=9, reg=0x29, shift=0x0, mask=0x7f
<6>[    0.316591] max77826_get_voltage_register: id=10, reg=0x2a, shift=0x0, mask=0x7f
<6>[    0.317030] max77826_ldo11: 2700 <--> 2950 mV at 2800 mV normal
<6>[    0.317040] max77826_get_voltage_register: id=10, reg=0x2a, shift=0x0, mask=0x7f
<6>[    0.317673] max77826_get_voltage_register: id=11, reg=0x2b, shift=0x0, mask=0x7f
<6>[    0.318111] max77826_ldo12: 2500 <--> 3300 mV at 3300 mV normal
<6>[    0.318121] max77826_get_voltage_register: id=11, reg=0x2b, shift=0x0, mask=0x7f
<6>[    0.318743] max77826_get_voltage_register: id=12, reg=0x2c, shift=0x0, mask=0x7f
<6>[    0.319182] max77826_ldo_set_voltage: id=12, reg=0x2c, mask=0x7f, val=0x64, new=0x64
<6>[    0.319940] max77826_ldo13: 3300 mV normal
<6>[    0.319949] max77826_get_voltage_register: id=12, reg=0x2c, shift=0x0, mask=0x7f
<6>[    0.320566] max77826_get_voltage_register: id=13, reg=0x2d, shift=0x0, mask=0x7f
<6>[    0.321005] max77826_ldo_set_voltage: id=13, reg=0x2d, mask=0x7f, val=0x64, new=0x64
<6>[    0.321762] max77826_ldo14: 3300 mV normal
<6>[    0.321772] max77826_get_voltage_register: id=13, reg=0x2d, shift=0x0, mask=0x7f
<6>[    0.322440] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    0.322879] max77826_ldo15: 1800 <--> 3300 mV at 1800 mV normal
<6>[    0.322889] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    0.323506] max77826_get_voltage_register: id=15, reg=0x31, shift=0x0, mask=0xff
<6>[    0.323945] max77826_ldo_set_voltage: id=15, reg=0x31, mask=0xff, val=0x74, new=0x74
<6>[    0.324702] max77826_buck1: 1225 mV normal
<6>[    0.324711] max77826_get_voltage_register: id=15, reg=0x31, shift=0x0, mask=0xff
<6>[    0.325340] max77826_get_voltage_register: id=16, reg=0x33, shift=0x0, mask=0x7f
<6>[    0.325779] max77826_ldo_set_voltage: id=16, reg=0x33, mask=0x7f, val=0x40, new=0x40
<6>[    0.326537] max77826_buck2: 3400 mV normal
<6>[    0.326547] max77826_get_voltage_register: id=16, reg=0x33, shift=0x0, mask=0x7f
<6>[    0.327115] i2c-gpio i2c.92: using pins 29 (SDA) and 30 (SCL)
<6>[    0.327554] i2c-gpio i2c.93: using pins 120 (SDA) and 121 (SCL)
<6>[    0.327934] i2c-gpio i2c.94: using pins 95 (SDA) and 96 (SCL)
<6>[    0.328391] i2c-gpio i2c.95: using pins 109 (SDA) and 108 (SCL)
<6>[    0.328987] Linux media interface: v0.10
<6>[    0.329032] Linux video capture interface: v2.00
<6>[    0.331554] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c4fe0000, with 3 ctx banks
<6>[    0.332669] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5080000, with 3 ctx banks
<6>[    0.334380] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c50a0000, with 5 ctx banks
<6>[    0.335382] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c50c0000, with 3 ctx banks
<6>[    0.336354] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c50e0000, with 3 ctx banks
<6>[    0.337472] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
<6>[    0.337587] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
<6>[    0.337703] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
<6>[    0.337827] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
<6>[    0.337947] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
<6>[    0.338057] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
<6>[    0.338183] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
<6>[    0.338308] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
<6>[    0.338422] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
<6>[    0.338531] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
<6>[    0.338644] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
<6>[    0.338789] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
<6>[    0.338899] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
<6>[    0.339011] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
<6>[    0.339136] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
<6>[    0.339246] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
<6>[    0.339354] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
<6>[    0.340787] [SENSORS CORE] sensors_class_init
<6>[    0.340886] fingerprint_class_init
<6>[    0.340949] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    0.341379] Bluetooth: Core ver 2.16
<6>[    0.341424] NET: Registered protocol family 31
<6>[    0.341433] Bluetooth: HCI device and connection manager initialized
<6>[    0.341444] Bluetooth: HCI socket layer initialized
<6>[    0.341453] Bluetooth: L2CAP socket layer initialized
<6>[    0.341628] Bluetooth: SCO socket layer initialized
<4>[    0.341871] regulatory is not upadted via queue_regulatory_request.
<6>[    0.343432] Switching to clocksource arch_sys_counter
<6>[    0.372678] NET: Registered protocol family 2
<6>[    0.372880] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.373443] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.375031] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    0.375765] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.375775] TCP: reno registered
<6>[    0.375790] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.375847] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.376160] NET: Registered protocol family 1
<6>[    0.376478] Trying to unpack rootfs image as initramfs...
<3>[    0.433585] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    0.683554] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    0.933573] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.183573] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.433578] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<3>[    1.683572] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<6>[    1.930730] Freeing initrd memory: 3064K
<3>[    1.933751] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
<6>[    1.935406] FIPS: self-tests for aes-asm (aes) passed
<6>[    1.935655] FIPS: self-tests for sha1-asm (sha1) passed
<6>[    1.935853] FIPS: self-tests for sha1-neon (sha1) passed
<6>[    1.936123] FIPS: self-tests for sha512-neon (sha512) passed
<6>[    1.936359] FIPS: self-tests for sha384-neon (sha384) passed
<6>[    1.936392] Detected 9 counters on the L2CC PMU.
<7>[    1.938280] gpiochip_find_base: found new base at 992
<6>[    1.938380] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
<7>[    1.938866] gpiochip_find_base: found new base at 960
<6>[    1.938942] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
<7>[    1.938978] gpiochip_find_base: found new base at 928
<6>[    1.939056] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
<7>[    1.939542] gpiochip_find_base: found new base at 896
<6>[    1.939617] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
<7>[    1.939653] gpiochip_find_base: found new base at 864
<6>[    1.939733] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
<7>[    1.940233] gpiochip_find_base: found new base at 832
<6>[    1.940308] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
<7>[    1.940377] gpiochip_find_base: found new base at 800
<6>[    1.940456] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
<7>[    1.940972] gpiochip_find_base: found new base at 768
<6>[    1.941047] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
<7>[    1.941084] gpiochip_find_base: found new base at 736
<6>[    1.941158] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
<7>[    1.941700] gpiochip_find_base: found new base at 704
<6>[    1.941776] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
<7>[    1.941836] gpiochip_find_base: found new base at 672
<6>[    1.941911] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
<7>[    1.942449] gpiochip_find_base: found new base at 640
<6>[    1.942530] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
<7>[    1.942565] gpiochip_find_base: found new base at 608
<6>[    1.942640] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
<7>[    1.943204] gpiochip_find_base: found new base at 576
<6>[    1.943285] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
<7>[    1.943358] gpiochip_find_base: found new base at 544
<6>[    1.943435] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
<7>[    1.944540] gpiochip_find_base: found new base at 512
<6>[    1.944628] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
<7>[    1.944667] gpiochip_find_base: found new base at 480
<6>[    1.944743] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
<7>[    1.945328] gpiochip_find_base: found new base at 448
<6>[    1.945410] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
<6>[    1.947338] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
<6>[    1.951148] pil_venus fdce0000.qcom,venus: using secure boot
<6>[    1.961000] NET: Registered protocol family 27
<1>[    1.965464] dma_test_init, minor number 64
<6>[    1.966781] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
<6>[    1.966794] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 5
<6>[    1.966805] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
<6>[    1.969739] L2 @ 729600 KHz
<6>[    1.969899] CPU0 @ 960000 KHz
<6>[    1.969907] CPU1 @ unknown rate. Forcing new rate.
<6>[    1.970000] CPU1 @ 300000 KHz
<6>[    1.970007] CPU2 @ unknown rate. Forcing new rate.
<6>[    1.970097] CPU2 @ 300000 KHz
<6>[    1.970104] CPU3 @ unknown rate. Forcing new rate.
<6>[    1.970194] CPU3 @ 300000 KHz
<4>[    1.973210] ####init
<6>[    1.974605] SEC_MASTERSTATS : Init done
<5>[    1.976086] msm_rpm_log_probe: OK
<6>[    1.979216] register extcon notifier for JIG and docks
<6>[    1.984385] mpm_counter: [    1.984377]:(236689)
<3>[    1.987443] [BT] gpio_rev_init, gpio_bt_host_wake = 75
<7>[    1.988037] gpio_request: gpio-309 (bt_en) status -22
<3>[    1.988092] [BT] bcm4354_bluetooth_probe: gpio_request for gpio_bt_en is failed
<4>[    1.988192] ------------[ cut here ]------------
<4>[    1.988246] WARNING: at /home/jc/build/nethunter-kernel/klte/drivers/gpio/gpiolib.c:1317 0xc03cf93c()
<4>[    1.988255] Function entered at [<c010b440>] from [<c01932e8>]
<4>[    1.988260] Function entered at [<c01932e8>] from [<c01933bc>]
<4>[    1.988264] Function entered at [<c01933bc>] from [<c03cf93c>]
<4>[    1.988270] Function entered at [<c03cf93c>] from [<c018fe10>]
<4>[    1.988274] Function entered at [<c018fe10>] from [<c04a6b9c>]
<4>[    1.988280] Function entered at [<c04a6b9c>] from [<c04a6d7c>]
<4>[    1.988284] Function entered at [<c04a6d7c>] from [<c04a55fc>]
<4>[    1.988288] Function entered at [<c04a55fc>] from [<c04a5d04>]
<4>[    1.988292] Function entered at [<c04a5d04>] from [<c04a74e4>]
<4>[    1.988296] Function entered at [<c04a74e4>] from [<c0e00c08>]
<4>[    1.988301] Function entered at [<c0e00c08>] from [<c0e00dc0>]
<4>[    1.988305] Function entered at [<c0e00dc0>] from [<c01063f8>]
<4>[    1.988309] ---[ end trace da227214a82491b8 ]---
<6>[    1.988410] func:sec_therm_init
<6>[    1.988557] sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading
<6>[    1.988592] sec_getlog_supply_kloginfo: 0xc1052010
<6>[    1.988682] audit: initializing netlink socket (enabled)
<4>[    1.989146] highmem bounce pool size: 64 pages
<6>[    1.991096] exFAT: Core Version 1.2.12
<6>[    1.991101] exFAT: FS Version 1.2.12
<6>[    1.991401] Registering sdcardfs 2.1.4
<6>[    1.991451] NTFS driver 2.1.30 [Flags: R/W].
<6>[    1.991540] fuse init (API version 7.18)
<7>[    1.991705] SELinux:  Registering netfilter hooks
<4>[    1.991955] key_dump feature not availabledek: initialized
<4>[    1.991964] SDP_MM: entering************************************************
<4>[    1.992012] SDP_PUB_CRYPTO[1]  : pub_crypto_mod_init netlink socket is created successfully!
<4>[    1.992062] SDP_FS_HANDLER[1]  : sdp_fs_handler_mod_init netlink socket is created successfully!
<6>[    1.992155] FIPS: No test for cipher_null (cipher_null-generic)
<6>[    1.992206] FIPS: No test for ecb(cipher_null) (ecb-cipher_null)
<6>[    1.992255] FIPS: No test for digest_null (digest_null-generic)
<6>[    1.992306] FIPS: No test for compress_null (compress_null-generic)
<6>[    1.992357] FIPS: self-tests for non-FIPS md5-generic (md5) passed
<6>[    1.992445] FIPS: self-tests for sha1-generic (sha1) passed
<6>[    1.992521] FIPS: self-tests for sha224-generic (sha224) passed
<6>[    1.992590] FIPS: self-tests for sha256-generic (sha256) passed
<6>[    1.992709] FIPS: self-tests for sha384-generic (sha384) passed
<6>[    1.992819] FIPS: self-tests for sha512-generic (sha512) passed
<6>[    1.992898] FIPS: self-tests for des-generic (des) passed
<6>[    1.992975] FIPS: self-tests for des3_ede-generic (des3_ede) passed
<6>[    1.993024] FIPS: self-tests for non-FIPS twofish-generic (twofish) passed
<6>[    1.993104] FIPS: self-tests for aes-generic (aes) passed
<6>[    1.993154] FIPS: self-tests for non-FIPS arc4-generic (arc4) passed
<6>[    1.993203] FIPS: self-tests for non-FIPS deflate-generic (deflate) passed
<6>[    1.993285] FIPS: self-tests for crc32c-generic (crc32c) passed
<6>[    1.993337] FIPS: No test for stdrng (krng)
<6>[    2.001055] FIPS: self-tests for ansi_cprng (stdrng) passed
<6>[    2.001124] FIPS: No test for fips(ansi_cprng) (fips_ansi_cprng)
<3>[    2.001160] FIPS : Tcrypt Tests Start
<6>[    2.001335] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[    2.001391] FIPS: self-tests for ecb(aes-generic) (ecb(aes)) passed
<6>[    2.001579] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[    2.001636] FIPS: self-tests for cbc(aes-generic) (cbc(aes)) passed
<6>[    2.001747] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[    2.001791] FIPS: self-tests for ecb(aes-asm) (ecb(aes)) passed
<6>[    2.001969] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[    2.002016] FIPS: self-tests for cbc(aes-asm) (cbc(aes)) passed
<6>[    2.002132] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[    2.002181] FIPS: self-tests for ecb(des3_ede-generic) (ecb(des3_ede)) passed
<6>[    2.002365] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[    2.002421] FIPS: self-tests for cbc(des3_ede-generic) (cbc(des3_ede)) passed
<6>[    2.002452] FIPS: self-tests for sha1-generic (sha1) passed
<6>[    2.002476] FIPS: self-tests for sha224-generic (sha224) passed
<6>[    2.002500] FIPS: self-tests for sha256-generic (sha256) passed
<6>[    2.002566] FIPS: self-tests for sha384-generic (sha384) passed
<6>[    2.002632] FIPS: self-tests for sha512-generic (sha512) passed
<6>[    2.002659] FIPS: self-tests for sha1-asm (sha1) passed
<6>[    2.002805] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[    2.002876] FIPS: self-tests for hmac(sha1-asm) (hmac(sha1)) passed
<6>[    2.003022] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[    2.003100] FIPS: self-tests for hmac(sha1-generic) (hmac(sha1)) passed
<6>[    2.003251] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[    2.003334] FIPS: self-tests for hmac(sha224-generic) (hmac(sha224)) passed
<6>[    2.003559] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[    2.003685] FIPS: self-tests for hmac(sha256-generic) (hmac(sha256)) passed
<6>[    2.003994] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[    2.004221] FIPS: self-tests for hmac(sha384-generic) (hmac(sha384)) passed
<6>[    2.004524] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[    2.004749] FIPS: self-tests for hmac(sha512-generic) (hmac(sha512)) passed
<6>[    2.012194] FIPS: self-tests for fips_ansi_cprng (ansi_cprng) passed
<3>[    2.012198] FIPS : Tcrypt Tests End
<3>[    2.012305] FIPS(query_symbol_addresses): Error Invalid Addresses.
<3>[    2.012360] FIPS(do_integrity_check): Error to get start / end addresses
<3>[    2.012510] tcrypt: CRYPTO API started in FIPS mode!!!
<6>[    2.012674] FIPS: self-tests for ghash-generic (ghash) passed
<6>[    2.012754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
<6>[    2.012760] io scheduler noop registered (default)
<7>[    2.013100] gpiochip_find_base: found new base at 426
<6>[    2.013139] gpiochip_add: registered GPIOs 426 to 447 on device: pma8084-gpio
<7>[    2.013779] qcom,qpnp-pin qpnp-pin-ea52a200: qpnp_pin_probe: gpio_chip registered between 426-447
<7>[    2.014669] gpiochip_find_base: found new base at 419
<6>[    2.014707] gpiochip_add: registered GPIOs 419 to 425 on device: pma8084-mpp
<7>[    2.015074] qcom,qpnp-pin qpnp-pin-ea52a400: qpnp_pin_probe: gpio_chip registered between 419-425
<6>[    2.015400] [pcal6416a_gpio_probe]
<3>[    2.015443] [pcal6416a_parse_dt]: Unable to read pcal6416a,supply-name
<6>[    2.015545] [pcal6416a_parse_dt] 0x00040401
<6>[    2.015549] [pcal6416a_parse_dt] initialize reg 0xa0b0 0x0008 0x0221 0x0000
<6>[    2.015554] [pcal6416a_parse_dt]gpio_start=[300]ngpio=[16]reset-gpio=[145]
<6>[    2.015558] [pcal6416a_parse_dt] supply-name=[8084_s4]
<4>[    2.015596] 8084_s4: Failed to create debugfs directory
<6>[    2.015777] pcal6416a_power_ctrl: gpio expander 1.8V on is finished.
<3>[    2.015781] [pcal6416a gpio expander] pcal6416a_power_ctrl enable(1)
<6>[    2.016078] [pcal6416a_reset_chip]: gpio expander reset.
<6>[    2.016084] [pcal6416a_gpio_setup] GPIO Expander Init setting
<6>[    2.019856] [pcal6416a_gpio_probe]Expander setup success [0]
<6>[    2.019893] gpiochip_add: registered GPIOs 300 to 315 on device: gpio-expander
<6>[    2.019898] pcal6416a-gpio 17-0020: gpios 300..315 on a gpio-expander
<6>[    2.020064] mdss_mdp_probe: mdss_mdp_probe : ++
<6>[    2.020086] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5100000
<6>[    2.020107] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc50b2000
<3>[    2.020203] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
<3>[    2.020304] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
<6>[    2.020402] mdss_mdp_parse_dt_ad_cfg: SS is not using assertive display
<6>[    2.021302] mdss_mdp_probe: mdss_mdp_probe : --
<6>[    2.021674] mdss_dsi_driver_init ++
<6>[    2.021754] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
<6>[    2.021776] mdss_dsi_get_panel_cfg:628: cfg:[0:mdss_dsi_samsung_1080p_cmd_fa2]
<6>[    2.021787] mdss_dsi_panel_init: Panel Name = samsung amoled 1080p command mode dsi S6E3FA2 panel
<6>[    2.022005] mdss_dsi_parse_panel_features:2743 Partial update enabled
<6>[    2.022012] mdss_dsi_parse_panel_features: ulps feature disabled
<6>[    2.022016] mdss_dsi_panel_init: Continuous splash enabled
<6>[    2.022103] mdss_samsung_create_sysfs: done!!
<6>[    2.022107] [mdss_dsi_panel_init] CONFIG_MDNIE_LITE_TUNING ok ! init class called!
<3>[    2.022111] [mdnie lite] start!
<3>[    2.022205] [mdnie lite] end!
<6>[    2.022260] mdss_dsi_panel_init : --
<6>[    2.022264] dsi_panel_device_register : ++
<6>[    2.022300] mdss_dsi_regulator_init: vregn(3)
<6>[    2.022495] mdss_dsi_regulator_init: vdd3 - VREG_LVS4 (i/o) init..
<6>[    2.022504] dsi_panel_device_register:2046, broadcast (0)
<3>[    2.022532] dsi_panel_device_register:2131, Disp_en_gpio (439)
<3>[    2.022640] dsi_panel_device_register:2421, Disp_te_gpio (12)
<3>[    2.022761] dsi_panel_device_register:2470, Disp_rst_gpio (442)
<6>[    2.022954] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c50d2800 ctrl_size=1f8 phy_base=c50d4b00 phy_size=2b0
<6>[    2.023065] dsi_panel_device_register : splash enabled..panel_power_on (1)
<6>[    2.023071] mdss_dsi_panel_power_on: enable=1 vregn(3)
<6>[    2.023832] mdss_dsi_extra_power: ++ enable(1) ndx(0)
<6>[    2.023836] mdss_dsi_extra_power: lvs4(VDD3) enable.
<6>[    2.035677] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
<6>[    2.035815] mdss_hw_init: MDP Rev=10020001
<6>[    2.036560] dsi_panel_device_register: Panel data initialized
<6>[    2.036564] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized
<6>[    2.036578] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
<6>[    2.036599] mdss_dsi_get_panel_cfg:628: cfg:[0:mdss_dsi_samsung_1080p_cmd_fa2]
<3>[    2.036604] mdss_dsi_pref_prim_panel:can't find panel phandle
<3>[    2.036703] mdss_dsi_ctrl_probe: can't find panel node 0:mdss_dsi_samsung_1080p_cmd_fa2
<4>[    2.036762] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 32
<6>[    2.037010] mdss_dsi_driver_init --
<6>[    2.037015] mdss_dsi_status_init: DSI status check interval:5000
<6>[    2.037173] hdmi_tx_get_dt_data : drm_orkaround = true
<6>[    2.037186] hdmi_tx_init_resource: 'core_physical': start = 0xc50d8100, len=0x370
<6>[    2.037195] hdmi_tx_init_resource: 'phy_physical': start = 0xc50da500, len=0x7c
<6>[    2.037205] hdmi_tx_init_resource: 'qfprom_physical': start = 0xc50f8000, len=0x60f0
<6>[    2.037635] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
<6>[    2.038303] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
<6>[    2.038880] mdss_fb_parse_dt: split framebuffer left=0 right=0
<6>[    2.038886] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<3>[    2.038893] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=1f00000
<4>[    2.038993] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.039048] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
<3>[    2.039078] samsung_dsi_panel_event_handler : unknown event (1)
<6>[    2.039139] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
<6>[    2.039143] thrd_start =4 thrd_cont=4
<7>[    2.039202] Registered led device: lcd-backlight
<6>[    2.039216] mdss_dsi_panel_registered mds.mfd is ok!!
<6>[    2.039219] [mdss_dsi_panel_registered] CONFIG_MDNIE_LITE_TUNING ok ! mdnie_lite_tuning_init called!
<6>[    2.039224] mdss_dsi_panel_registered:2190, Panel registered succesfully
<6>[    2.039233] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.039250] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<4>[    2.039255] mdss_fb_alloc_fbmem_iommu: reserve size is smaller than framebuffer size
<3>[    2.039259] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=0
<4>[    2.039358] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.039402] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
<6>[    2.039446] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.039463] mdss_fb_alloc_fbmem_iommu: boot_mode_lpm = 0, boot_mode_recovery = 1
<4>[    2.039467] mdss_fb_alloc_fbmem_iommu: reserve size is smaller than framebuffer size
<3>[    2.039472] mdss_fb_alloc_fbmem_iommu: unable to alloc fbmem size=0
<4>[    2.039525] mdss_fb_register: unable to allocate fb memory in fb register
<6>[    2.039569] mdss_fb_register: FrameBuffer[2] 1920x1080 registered successfully!
<6>[    2.039595] mdp4_reg_csc_fs: mdp4_reg_csc_fs: kobject_uevent(KOBJ_ADD)
<6>[    2.039610] sii8240_init sii8240: check mhl
<6>[    2.039648] gpio: mhl_irq = 31
<6>[    2.039669] gpio: mhl_reset = 423
<6>[    2.039674] of_sii8240_parse_dt() gpio_mhl_reset_type = 3
<6>[    2.039687] gpio: mhl_scl = 11
<6>[    2.039700] gpio: mhl_sda = 10
<6>[    2.039705] swing_level = 0x25
<6>[    2.039710] barcode_emul = false
<6>[    2.039713] drm_workaround = true
<6>[    2.039846] of_sii8240_parse_dt: hdmi_pdev [0Xea533200] to pdata->pdev
<6>[    2.039877] sii8240_mhlv2dt 3-0039: success client_addr 0x39
<6>[    2.040044] sii8240_mhlv2dt 3-0039: sii8240 irq : 304
<6>[    2.040052] sii8240_mhlv2dt 3-0039: sii8240: registering input device
<6>[    2.040120] input: sii8240_rcp as /devices/virtual/input/input0
<6>[    2.040321] sii8240_mhlv2dt 3-0049: success client_addr 0x49
<6>[    2.040335] sii8240_mhlv2dt 3-004d: success client_addr 0x4D
<6>[    2.040348] sii8240_mhlv2dt 3-0059: success client_addr 0x59
<6>[    2.040361] sii8240_mhlv2dt 3-0064: success client_addr 0x64
<3>[    2.052617] sps: BAM device 0xf9944000 is not registered yet.
<6>[    2.052727] sps:BAM 0xf9944000 is registered.
<6>[    2.054654] f995e000.uart: ttyHS0 at MMIO 0xf995e000 (irq = 146) is a MSM HS UART
<3>[    2.056042] sps: BAM device 0xf9904000 is not registered yet.
<6>[    2.056104] sps:BAM 0xf9904000 is registered.
<6>[    2.057651] f991d000.uart: ttyHS3 at MMIO 0xf991d000 (irq = 139) is a MSM HS UART
<6>[    2.059163] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
<6>[    2.059233] f991e000.serial: ttyHSL0 at MMIO 0xf991e000 (irq = 140) is a MSM
<6>[    2.061475] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
<6>[    2.061549] f995d000.serial: ttyHSL1 at MMIO 0xf995d000 (irq = 145) is a MSM
<6>[    2.064088] msm_serial_hsl_init: driver initialized
<6>[    2.066095] diagchar initialized now
<3>[    2.066556] kgsl: adreno_of_read_property: Unable to read 'qcom,pm-qos-latency'
<4>[    2.067212] kgsl bus ib [0] = 2456000000
<4>[    2.067216] kgsl bus ib [1] = 3680000000
<4>[    2.067220] kgsl bus ib [2] = 4912000000
<4>[    2.067223] kgsl bus ib [3] = 7464000000
<4>[    2.067226] kgsl bus index is 3 for pwrlevel 0
<4>[    2.067230] kgsl bus index is 2 for pwrlevel 1
<4>[    2.067233] kgsl bus index is 2 for pwrlevel 2
<4>[    2.067236] kgsl bus index is 1 for pwrlevel 3
<4>[    2.067239] kgsl bus index is 0 for pwrlevel 4
<4>[    2.067242] kgsl bus index is 0 for pwrlevel 5
<6>[    2.067743] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<4>[    2.068215] kgsl: num bus is 4
<6>[    2.068910] GPU_SYSFS ----------- gpu_sysfs_init -- 224
<6>[    2.069147] GPU_SYSFS ----------- gpu_sysfs_probe -- 158
<6>[    2.069151] GPU_SYSFS ----------- gpu_sysfs_device_init -- 144
<6>[    2.069155] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 29
<6>[    2.069175] GPU_SYSFS ----------- gpu_sysfs_create_sysfs_files -- 115
<6>[    2.069179] GPU_SYSFS ----------- gpu_sysfs_probe -- 178
<6>[    2.069192] GPU_SYSFS ----------- gpu_sysfs_init -- 250
<6>[    2.071410] brd: module loaded
<6>[    2.072554] loop: module loaded
<4>[    2.072897] QSEECOM: qseecom_probe: support_bus_scaling=0x1
<4>[    2.072903] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
<4>[    2.072908] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
<4>[    2.072912] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
<4>[    2.072917] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
<4>[    2.072945] QSEECOM: qseecom_probe: secure app region addr=0x7300000 size=0xd00000
<6>[    2.073392] init tzic
<6>[    2.073558] irda_ice40_init
<6>[    2.073590] irda_ice40_probe probe!
<6>[    2.073709] irda_ice40_config
<6>[    2.073712] g_pdata->fw_ver  = 2
<6>[    2.073715] g_pdata->rst_n   = 303
<6>[    2.073718] g_pdata->spi_clk = 108
<6>[    2.073721] g_pdata->spi_si  = 109
<6>[    2.073724] g_pdata->irda_irq= 101
<6>[    2.073727] g_pdata->cresetb = 436
<4>[    2.073732] irda_ice40_config: warning check pin num[-22]
<4>[    2.073759] irda_ice40_config: warning check pin num[-22]
<6>[    2.073763] pcal6416a_gpio_request
<6>[    2.073768] pcal6416a_gpio_direction_output(off=[3], val=[0])
<6>[    2.074664] irda_ice40_probe complete[1433]
<4>[    2.074731] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[    2.074735] i2c-core: driver [tabla-i2c-core] using legacy resume method
<4>[    2.074800] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
<4>[    2.074804] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
<6>[    2.074963] SCSI Media Changer driver v0.25
<4>[    2.075190] spi_qsd f9966000.spi: msm_spi_dt_to_pdata pdata->use_bam: 1
<6>[    2.075455] sps:BAM 0xf9944000 (va:0xc5140000) enabled: ver:0x13, number of pipes:24
<6>[    2.078847] msm_spi_dt_to_pdata: disable bam for BLSP5 tzspi
<4>[    2.078852] spi_qsd f9927000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
<4>[    2.078858] spi_qsd f9927000.spi: using default bus_num -1
<4>[    2.082025] spi_qsd f9967000.spi: msm_spi_dt_to_pdata pdata->use_bam: 0
<4>[    2.082031] spi_qsd f9967000.spi: using default bus_num -1
<6>[    2.085380] tun: Universal TUN/TAP device driver, 1.6
<6>[    2.085385] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    2.085419] rmnet_init: BAM devices[9]
<6>[    2.087863] PPP generic driver version 2.4.2
<6>[    2.087913] PPP BSD Compression module registered
<6>[    2.087918] PPP Deflate Compression module registered
<6>[    2.088036] FIPS: self-tests for non-FIPS ecb(arc4-generic) (ecb(arc4)) passed
<6>[    2.088062] PPP MPPE Compression module registered
<6>[    2.088067] NET: Registered protocol family 24
<6>[    2.088073] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    2.088078] CSLIP: code copyright 1989 Regents of the University of California.
<7>[    2.088083] function asix_init line 3883
<6>[    2.088103] usbcore: registered new interface driver asix
<6>[    2.088119] usbcore: registered new interface driver cdc_ether
<6>[    2.088135] usbcore: registered new interface driver net1080
<6>[    2.088151] usbcore: registered new interface driver cdc_subset
<6>[    2.088170] usbcore: registered new interface driver zaurus
<6>[    2.088226] usbcore: registered new interface driver cdc_ncm
<6>[    2.089451] Get USB 3.0 redriver GPIO address
<3>[    2.089509] /soc/qcom,ssusb@f9200000: could not find phandle
<6>[    2.093550] ice40_fpga_firmware_update_klte[436] fw_ver 2
<6>[    2.093557] ice40_fpga_fimrware_update_start
<6>[    2.093562] ice40_clock_en:103 - on : 1
<6>[    2.183505] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[    2.183531] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 36)(2 --- 33)(3 --- 34)(4 --- 40)(5 --- 44)(6 --- 47)(7 --- 45)(8 --- 45)(9 --- 36)(10 --- 33)
<6>[    2.337917] dwc3-msm: sec_otg_init is called.
<6>[    2.337921] sec_otg_init: register notifier
<3>[    2.337927] get_vbus_detect_gpio, cannot get vbus-detect-gpio, ret=-22
<6>[    2.338909] usbcore: registered new interface driver cdc_acm
<6>[    2.338914] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    2.338919] Initializing USB Mass Storage driver...
<6>[    2.338934] usbcore: registered new interface driver usb-storage
<6>[    2.338938] USB Mass Storage support registered.
<6>[    2.338955] usbcore: registered new interface driver ums-alauda
<6>[    2.338969] usbcore: registered new interface driver ums-cypress
<6>[    2.338983] usbcore: registered new interface driver ums-datafab
<6>[    2.338997] usbcore: registered new interface driver ums_eneub6250
<6>[    2.339011] usbcore: registered new interface driver ums-freecom
<6>[    2.339025] usbcore: registered new interface driver ums-isd200
<6>[    2.339039] usbcore: registered new interface driver ums-jumpshot
<6>[    2.339053] usbcore: registered new interface driver ums-karma
<6>[    2.339067] usbcore: registered new interface driver ums-onetouch
<6>[    2.339081] usbcore: registered new interface driver ums-sddr09
<6>[    2.339099] usbcore: registered new interface driver ums-sddr55
<6>[    2.339113] usbcore: registered new interface driver ums-usbat
<6>[    2.339147] usbcore: registered new interface driver usbserial
<6>[    2.339152] usbserial: USB Serial Driver core
<6>[    2.339165] usbcore: registered new interface driver pl2303
<6>[    2.339181] USB Serial support registered for pl2303
<6>[    2.339340] host_notifier host-notifier.44: notifier_probe
<7>[    2.339793] usb: android_bind disconnect
<6>[    2.339825] mbim_init: initialize 1 instances
<6>[    2.339863] mbim_init: Initialized 1 ports
<6>[    2.340647] rndis_qc_init: initialize rndis QC instance
<6>[    2.340830]  gadget: Mass Storage Function, version: 2009/09/11
<6>[    2.340835]  gadget: Number of LUNs=1
<6>[    2.340840]  lun0: LUN: removable CD-ROM file: (no medium)
<3>[    2.340926] conn_gadget_function_init(#) call conn_gadget_setup
<6>[    2.341030] conn_gadget_setup
<7>[    2.341148] usb: composite_bind idVendor=0x0, idProduct=0x0
<7>[    2.341153] usb: composite_bind bcdDevice=0x0
<7>[    2.341157] usb: composite_bind composite_manufacturer=
<6>[    2.341163]  gadget: android_usb ready
<6>[    2.342261] mousedev: PS/2 mouse device common for all mice
<3>[    2.342419] cypress_touchkey_probe: start!
<6>[    2.342681] cypress_touchkey 21-0020: cypress_power_onoff: power on
<4>[    2.342697] max77826_ldo15: Failed to create debugfs directory
<6>[    2.342705] max77826_get_voltage_register: id=14, reg=0x2e, shift=0x0, mask=0x7f
<6>[    2.343100] max77826_ldo_set_voltage: id=14, reg=0x2e, mask=0x7f, val=0x28, new=0x28
<6>[    2.343880] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.344272] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.344663] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.370357] FPGA firmware update success
<6>[    2.373225] ice40_clock_en:103 - on : 0
<6>[    2.504482] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<6>[    2.544091] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    2.544164] input: sec_touchkey as /devices/i2c.94/i2c-21/21-0020/input/input1
<6>[    2.544204] cypress_touchkey 21-0020: gpio_to_irq IRQ 627
<6>[    2.544381] cypress_touchkey 21-0020: TKEY MODULE 0x06! system_rev:e
<6>[    2.544386] tkey/semco_cypress_tkey.fw!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
<6>[    2.544392] cypress_touchkey 21-0020: the fw 0x1d is loaded (size=8192) hdr_len=16
<6>[    2.544398] cypress_touchkey 21-0020: tkey_flash_fw : part fw ver:0x1d, phone fw ver:0x1d, header ver:0x1
<6>[    2.544403] cypress_touchkey 21-0020: tkey_flash_fw : IC aleady have latest firmware (fw:0x1d module:0x6)
<6>[    2.544419] cypress_touchkey 21-0020: tkey_fw_update_work : touchkey_update Start!!
<3>[    2.544426] [TKEY] start..
<6>[    2.544484] cypress_touchkey 21-0020: cypress_power_onoff: power off
<6>[    2.544488] cypress_touchkey 21-0020: cypress_touchkey_probe: done
<6>[    2.544494] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.544517] cypress_touchkey_init: init done 0
<6>[    2.544699] usbcore: registered new interface driver xpad
<3>[    2.544721] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_probe start.
<6>[    2.544822] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply0: max77826_ldo13
<6>[    2.544828] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: supply1: 8084_lvs2
<6>[    2.544836] synaptics_rmi4_i2c 2-0020: synaptics_parse_dt: Unable to read synaptics,sub-project
<3>[    2.544842] synaptics_parse_dt: OCTA ID = 1
<6>[    2.544872] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.544946] synaptics_parse_dt: power= -22, tsp_int= 433, X= 1079, Y= 1919, project= K, config[0][0][129][0], tablet = 0 reset= -22 surface-only= 0
<6>[    2.545165] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.545880] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.546231] max77826_get_op_register: id=12, reg=0x13, mask=0x2, pattern=0x2
<6>[    2.546843] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: max77826_ldo13 is enabled[OK]
<6>[    2.548482] synaptics_rmi4_i2c 2-0020: synaptics_power_ctrl: 8084_lvs2 is enabled[OK]
<6>[    2.557883] cypress_touchkey 21-0020: cypress_power_onoff: power on
<6>[    2.557889] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.558240] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.558590] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<3>[    2.574749] [TKEY] re run check.
<6>[    2.703996] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 found (page 0): INT_SRC[21] BASE_ADDRS[00,08,00,1f]
<6>[    2.704453] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f34_read_version: [IC] test_result[0][date, revision, version] [04/10, 0xA3, 0x55], Bootlader : vV646
<6>[    2.704731] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F01 found (page 0): INT_SRC[01] BASE_ADDRS[04,0C,1E,25]
<6>[    2.704889] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
<6>[    2.705338] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 found (page 0): INT_SRC[01] BASE_ADDRS[06,11,00,44]
<6>[    2.706536] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
<6>[    2.707127] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: Function 12 max x = 1079 max y = 1919
<6>[    2.707650] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: 12 num_Rx:28 num_Tx:16, node:448, threshold:30, gloved sensitivity:e3
<6>[    2.708027] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_init: jitter filter strenth = 40, glove jitter filter strenght = 200
<6>[    2.708694] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F54 found (page 1): INT_SRC[01] BASE_ADDRS[00,0D,38,39]
<6>[    2.709749] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F55 found (page 3): INT_SRC[01] BASE_ADDRS[00,00,04,05]
<6>[    2.710414] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 found (page 4): INT_SRC[61] BASE_ADDRS[00,18,00,57]
<3>[    2.710697] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: f51 query feature feature1:55, feature2:1A
<6>[    2.710941] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: edge_swipe: 040B, detection_flag2 : 0409
<6>[    2.710948] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f51_init: sidekey_threshold addr : 0447, stylus_enable_addr : 0455
<6>[    2.713150] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
<6>[    2.714433] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: [s5100 A3 F] package_id is 12597, package_rev is 12336
<6>[    2.714641] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
<6>[    2.714647] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
<6>[    2.714653] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[61] NUM_INT_REG[00] INT_MASK[20]
<6>[    2.714658] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
<6>[    2.715124] input: sec_touchscreen as /devices/f9924000.i2c/i2c-2/2-0020/input/input2
<6>[    2.715133] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_input_open
<3>[    2.715139] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_start_device already power on
<6>[    2.721691] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID] [0x0000 0x0000, s5100 A3 F]
<6>[    2.721923] synaptics_rmi4_i2c 2-0020: fwu_read_f34_queries: F34 Query : ID: V646
<3>[    2.728282] synaptics_rmi4_i2c 2-0020: rmidb_scan_pdt: Failed to find FDB
<3>[    2.735558] [TKEY] do not need fw update.
<6>[    2.735661] cypress_touchkey 21-0020: cypress_power_onoff: power off
<6>[    2.735666] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.736026] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.742925] cypress_touchkey 21-0020: cypress_power_onoff: power on
<6>[    2.742930] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.743288] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.743663] max77826_get_op_register: id=14, reg=0x13, mask=0x20, pattern=0x20
<6>[    2.767179] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_s5100_k_a3.fw
<6>[    2.767188] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: [FW size, version] [105536, 0xA355/0xA355(BIN/IC), prog bit[0]
<6>[    2.767195] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: pr_base:0x74, BL ver: 0x10, IC/FW pr_number : 1642224 / 1642224
<6>[    2.767200] synaptics_rmi4_i2c 2-0020: synaptics_skip_firmware_update: Do not need to update
<6>[    2.768008] using rtc device, qpnp_rtc, for alarms
<6>[    2.768024] qcom,qpnp-rtc qpnp-rtc-ea52aa00: rtc core: registered qpnp_rtc as rtc0
<3>[    2.768100] qcom,qpnp-rtc qpnp-rtc-ea52aa00: Probe success !!
<6>[    2.768176] i2c /dev entries driver
<7>[    2.769240] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
<7>[    2.769245] msm_vidc: 1: no elements in frequency table
<7>[    2.769249] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
<7>[    2.769305] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
<7>[    2.769313] msm_vidc: 1: Q6 hfi device probe called
<7>[    2.769427] msm_vidc: 1: debugfs_create_file: fail
<4>[    2.769759] msm_probe : Succeed!
<3>[    2.770155] cam_dummy_init_module:182
<3>[    2.770231] cam_dummy_platform_probe:87
<4>[    2.770653] cam_dummy_init_module: succeed
<4>[    2.771372] msm_cci_probe : Succeed!
<6>[    2.775095] msm_camera_power_up:1427 rear sensor: L, core_ver: 0 (0x30)
<3>[    2.775101] msm_camera_request_gpio_table:545 invalid gpio_tbl   (null) / size 0
<6>[    2.775158] msm_camera_config_single_vreg enable max77826_ldo8
<6>[    2.775200] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    2.775557] max77826_ldo_set_voltage: id=7, reg=0x27, mask=0x7f, val=0x28, new=0x28
<6>[    2.776169] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    2.776519] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<3>[    2.779149] error : not power up cci
<6>[    2.779316] msm_eeprom_match_id: read 0xF815, check Fidelix 32Mb:0xF815, Winbond 32Mb:0xEF15, Macronix 32Mb:0xC236, GigaDevice 32Mb:0xC815
<6>[    2.804488] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<3>[    2.808416] msm_eeprom_match_crc: map version = 5
<6>[    2.808477] msm_eeprom_verify_sum: checksum pass 0xcdec24
<6>[    2.808531] msm_eeprom_verify_sum: checksum pass 0x55dc94b0
<6>[    2.808535] msm_eeprom_verify_sum: checksum pass 0x7d2b9389
<6>[    2.808554] msm_eeprom_verify_sum: checksum pass 0xe54f27cc
<6>[    2.808560] msm_eeprom_verify_sum: checksum pass 0x753bb7f2
<6>[    2.808615] msm_eeprom_verify_sum: checksum pass 0x46d16187
<6>[    2.808632] msm_eeprom_verify_sum: checksum pass 0x8ff138c
<6>[    2.808804] msm_eeprom_verify_sum: checksum pass 0x250d165a
<3>[    2.808808] All CRC values are matched.
<6>[    2.808863] msm_camera_config_single_vreg disable max77826_ldo8
<6>[    2.808868] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    2.809483] max77826_get_voltage_register: id=7, reg=0x27, shift=0x0, mask=0x7f
<6>[    2.809833] max77826_ldo_set_voltage: id=7, reg=0x27, mask=0x7f, val=0x28, new=0x28
<3>[    2.812493] msm_camera_request_gpio_table:545 invalid gpio_tbl   (null) / size 0
<4>[    2.812637] msm_eeprom_spi_setup success result=0 supported=1ff X
<4>[    2.812796] MSM-SENSOR-DRIVER msm_sensor_driver_init:640 msm_sensor_driver_init : Enter
<3>[    2.813265] msm_sensor_get_sub_module_index qcom,companion cell index 0, rc 0
<3>[    2.813366] msm_sensor_get_sub_module_index qcom,companion cell index 1, rc 0
<4>[    2.813979] MSM-SENSOR-DRIVER msm_sensor_driver_parse:617 g_sctrl[0] e9a5fa00
<4>[    2.813981]
<4>[    2.814262] MSM-SENSOR-DRIVER msm_sensor_driver_parse:617 g_sctrl[2] e9a5fc00
<4>[    2.814264]
<4>[    2.814276] MSM-SENSOR-DRIVER msm_sensor_driver_init:644 probe success
<3>[    2.814657] [syscamera][camera_dcdc_probe::136]
<3>[    2.814756] [syscamera][ncp6335b_parse_dt::126]
<3>[    2.844095] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
<3>[    2.853517] qup_i2c f9923000.i2c: GPIO pins have no active setting
<3>[    2.853628] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.853683] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.853781] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.853836] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.853903] [syscamera][ncp6335b_read::67]Read Error [-110]
<3>[    2.854003] [syscamera][ncp6335b_read::68]NCP6335B PID[ffffff92]
<6>[    2.884090] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    2.884096] cypress_touchkey 21-0020: tkey_fw_update_work : touchkey_update pass!!
<3>[    2.893515] qup_i2c f9923000.i2c: GPIO pins have no active setting
<3>[    2.893625] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.893679] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.893733] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.893788] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.893898] [syscamera][ncp6335b_read::72]Read Error [-110]
<3>[    2.893953] [syscamera][ncp6335b_read::73]NCP6335B [0x10 Read :: ffffff92]
<4>[    2.933563] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    2.933608] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    2.933622] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.933678] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.933777] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.933831] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.933942] [syscamera][ncp6335b_read::77]Read Error [-110]
<3>[    2.933996] [syscamera][ncp6335b_read::78]NCP6335B [0x11 Read :: ffffff92]
<4>[    2.973516] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    2.973561] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    2.973575] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    2.973629] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    2.973727] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    2.973780] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    2.973889] [syscamera][ncp6335b_read::82]Read Error [-110]
<3>[    2.973943] [syscamera][ncp6335b_read::83]NCP6335B [0x14 Read :: ffffff92]
<3>[    2.974040] [syscamera][camera_dcdc_probe::173][pid::-110]
<4>[    3.013514] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.013609] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.013624] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.013723] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.013776] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.013873] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.013939] [syscamera][ncp6335b_write::43]Write Error [-110]
<4>[    3.053527] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.053572] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.053586] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.053685] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.053738] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.053836] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.053901] [syscamera][ncp6335b_write::47]Write Error [-110]
<4>[    3.093515] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.093560] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.093574] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x1c
<3>[    3.093629] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.093728] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.093782] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.093893] [syscamera][ncp6335b_write::51]Write Error [-110]
<3>[    3.093989] [syscamera][ncp6335b_init_module::214][rc::0]
<6>[    3.094108] [syscamera][fan53555_init_module::322][rc::0]
<3>[    3.095029] __msm_jpeg_init:908] Jpeg Device id 0
<3>[    3.095170] __msm_jpeg_init:908] Jpeg Device id 1
<3>[    3.095349] __msm_jpeg_init:908] Jpeg Device id 2
<6>[    3.110730] lirc_dev: IR Remote Control driver registered, major 230
<6>[    3.110787] IR NEC protocol handler initialized
<6>[    3.110791] IR RC5(x) protocol handler initialized
<6>[    3.110794] IR RC6 protocol handler initialized
<6>[    3.110798] IR JVC protocol handler initialized
<6>[    3.110801] IR Sony protocol handler initialized
<6>[    3.110805] IR RC5 (streamzap) protocol handler initialized
<6>[    3.110808] IR SANYO protocol handler initialized
<6>[    3.110812] IR MCE Keyboard/mouse protocol handler initialized
<6>[    3.110816] IR LIRC bridge handler initialized
<6>[    3.110819] gspca_main: v2.14.0 registered
<6>[    3.110860] usbcore: registered new interface driver uvcvideo
<6>[    3.110865] USB Video Class driver (1.1.1)
<6>[    3.147482] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[    3.147494] Bluetooth: BlueSleep Mode Driver Ver 1.1
<3>[    3.147673] bluesleep probe
<3>[    3.147675]  [BT]
<6>[    3.148229] cpuidle: using governor ladder
<6>[    3.148234] cpuidle: using governor menu
<6>[    3.148252] sdhci: Secure Digital Host Controller Interface driver
<6>[    3.148255] sdhci: Copyright(c) Pierre Ossman
<6>[    3.148609] sdhci-pltfm: SDHCI platform and OF driver helper
<3>[    3.148820] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.150499] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
<3>[    3.155980] sdhci_msm_vreg_disable: vdd-io Cannot find Regulator
<3>[    3.156298] mmc0: id 1
<6>[    3.157385] mmc0: no vmmc regulator found
<6>[    3.159474] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
<3>[    3.159552] sdhci_msm_vreg_enable: vdd-io Cannot find Regulator
<3>[    3.159612] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.159716] sdhci_msm_populate_pdata: vendor_type=4
<3>[    3.166999] mmc1: id 2
<4>[    3.167100]  Enter brcm_wifi_status_register
<6>[    3.167104] brcm_wifi_status_register: callback is c06f73b0, devid is e9b90440
<3>[    3.167110] mmc1: id 2, register_status_notify=c0176614, host=e9b90440, rescan_disable=0
<6>[    3.168184] mmc1: no vmmc regulator found
<6>[    3.170261] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
<3>[    3.170754] sdhci_msm_populate_pdata: before parsing vendor_type
<3>[    3.178924] mmc2: id 3
<7>[    3.178978] sdhci_msm_probe : Change sysfs Card Detect
<6>[    3.180026] mmc2: no vmmc regulator found
<6>[    3.182109] mmc2: SDHCI controller on msm_sdcc.3 [msm_sdcc.3] using ADMA
<3>[    3.182372] i2c i2c-17: an30259a_probe
<4>[    3.182428] an30259a_parse_dt warning default dt parse[-22]
<4>[    3.182432] an30259a_parse_dt warning lowpower dt parse[-22]
<4>[    3.182436] an30259a_parse_dt warning offset dt parse[-22]
<6>[    3.182440] an30259a_parse_dt LED default 0x28, lowpower 0x5
<6>[    3.182444] an30259a_parse_dt LED R_off[0x0] G_off[0x0] B_off[0x0]
<7>[    3.184607] Registered led device: led_r
<7>[    3.186960] Registered led device: led_g
<7>[    3.189310] Registered led device: led_b
<3>[    3.191836] [zealottt] max77804k_led_probe
<7>[    3.191965] Registered led device: leds-sec1
<7>[    3.197218] Registered led device: torch-sec1
<4>[    3.206631] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
<4>[    3.206636] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[    3.206651] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.206656] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc53c0000
<4>[    3.206660] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.206664] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<6>[    3.206844] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
<6>[    3.206850] qce qcedev.0: CE device = 0x0
<6>[    3.206852] , IO base, CE = 0xc53c0000
<6>[    3.206853] , Consumer (IN) PIPE 2,    Producer (OUT) PIPE 3
<6>[    3.206855] IO base BAM = 0x0
<6>[    3.206857] BAM IRQ 268
<6>[    3.206858] Engines Availability = 0x1010853
<6>[    3.208908] QCE50: qce_sps_get_bam: qce50 don't support command descriptor. bam_cfg7fff004
<6>[    3.208917] sps:BAM 0xfd444000 is registered.
<6>[    3.209068] sps:BAM 0xfd444000 (va:0xc51e0000) enabled: ver:0x20, number of pipes:8
<3>[    3.209074] sps:BAM 0xfd444000 pipe 3 sharing violation
<3>[    3.209128] sps:Failed to connect BAM 0xe9ba2400 pipe 3
<3>[    3.211245] QCE50: qce_sps_init_ep_conn: sps_connect() fail pipe_handle=0xe9ba2600, rc = -1
<3>[    3.211362] sps:De-init client in connected state: 0x1535053
<4>[    3.211492] qce: probe of qcedev.0 failed with error -1
<4>[    3.213933] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
<4>[    3.213937] QCE50: __qce_get_device_tree_data: ce-device =0x0
<4>[    3.213951] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.213956] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5540000
<4>[    3.213960] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.213964] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<4>[    3.216124] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
<3>[    3.216134] QCE50: __qce_init_clk: Unable to get CE core clk
<3>[    3.216189] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
<4>[    3.216306] qcrypto: probe of fd440000.qcom,qcrypto failed with error -2
<4>[    3.216324] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x0
<4>[    3.216328] QCE50: __qce_get_device_tree_data: ce-device =0x1
<4>[    3.218358] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
<4>[    3.218362] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc5580000
<4>[    3.218366] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
<4>[    3.218371] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
<4>[    3.218508] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
<3>[    3.218518] QCE50: __qce_init_clk: Unable to get CE core clk
<3>[    3.218572] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
<4>[    3.218688] qcrypto: probe of fd440000.qcom,qcrypto1 failed with error -2
<6>[    3.221546] Successfully registered hid_synaptics_driver
<6>[    3.221580] usbcore: registered new interface driver usbhid
<6>[    3.221585] usbhid: USB HID core driver
<6>[    3.221964] ashmem: initialized
<6>[    3.221994] logger: created 2048K log 'log_main'
<6>[    3.222024] logger: created 512K log 'log_events'
<6>[    3.222068] logger: created 2048K log 'log_radio'
<6>[    3.222101] logger: created 512K log 'log_system'
<6>[    3.222108] sec_getlog_supply_loggerinfo: 0xc1457b54 0xc1257b54 0xc11d7b54 0xc1157b54
<6>[    3.223152] sps:BAM 0xf9304000 is registered.
<6>[    3.223167] sps:BAM 0xf9a44000 is registered.
<3>[    3.223173] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
<6>[    3.223473] qcom,qpnp-power-on qpnp-power-on-ea529800: PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
<6>[    3.223513] qcom,qpnp-power-on qpnp-power-on-ea529800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
<6>[    3.223653] input: qpnp_pon as /devices/virtual/input/input3
<6>[    3.224248] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
<6>[    3.224724] PMIC@SID0: PMA8084 v2.1 options: 0, 2, 2, 2
<6>[    3.225049] mckernelapi : Mobicore API module initialized!
<6>[    3.225063] MobiCore mcd: MobiCore Driver, Build: Tue May 24 00:04:12 2016
<6>[    3.225067] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
<6>[    3.225184] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loading
<6>[    3.225288] fuelgauge_parse_dt reading fg_irq = 446
<6>[    3.225404] fuelgauge_parse_dt reading bat_int_gpio = 425
<6>[    3.225412] fuelgauge_parse_dt: fg_irq: 446, calculation_type: 0x17, fuel_alert_soc: 2,
<6>[    3.225414] repeated_fuelalert: 0
<6>[    3.225418] board_fuelgauge_init : assign battery data
<6>[    3.225424] board_fuelgauge_init: RCOMP0: 0x5d, RCOMP_charging: 0x5d, temp_cohot: -175, temp_cocold: -5825, is_using_model_data: 1, type_str: SDI, capacity_max: 990, capacity_max_margin: 50, capacity_min: -7,
<6>[    3.226126] sec-fuelgauge 19-0036: MAX17048 Fuel-Gauge Ver 0x0012
<6>[    3.227514] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.228211] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.228217] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 998 is used for capacity_max
<3>[    3.228966] max17048_get_current: Fail to get psy (sec-charger)
<3>[    3.229024] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[    3.229124] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.230637] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.231396] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.231402] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    3.231411] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<3>[    3.232307] max17048_get_current: Fail to get psy (sec-charger)
<3>[    3.232409] max17048_get_current_average: Fail to get psy (sec-charger)
<3>[    3.232465] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.234095] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.234853] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.234859] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    3.234868] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<6>[    3.236284] sec-fuelgauge 19-0036: sec_fuelgauge_probe: fg_irq = 630
<6>[    3.236401] sec-fuelgauge 19-0036: sec_fuelgauge_probe: SEC Fuelgauge Driver Loaded
<6>[    3.236436] func:max77804k_charger_init
<6>[    3.236610] max77804k_charger_probe: MAX77804K Charger driver probe
<6>[    3.236752] sec_charger_parse_dt use bat irq -22
<3>[    3.236758] max77804k-charger max77804k-charger: max77804k_charger_probe : Failed to get charger int
<6>[    3.239410] max77804k_charger_initialize: battery cv voltage 0xdf
<6>[    3.239760] max77804k_charger_probe: device found: ver.0x4
<6>[    3.240188] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    3.240885] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<3>[    3.240890] max77804k_get_health_state: Fail to get psy (battery)
<3>[    3.241335] max77804k_get_vbus_state: Fail to get psy (battery)
<6>[    3.242078] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    3.242429] sec_chg_get_property: reg_data(93)
<6>[    3.242780] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    3.243151] sec_chg_get_property: reg_data(93)
<6>[    3.243523] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    3.244480] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<3>[    3.244486] max77804k_get_health_state: Fail to get psy (battery)
<3>[    3.245087] max77804k_get_vbus_state: Fail to get psy (battery)
<6>[    3.246297] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    3.246904] sec_chg_get_property: reg_data(93)
<6>[    3.247512] max77804k_get_input_current: CHG_CNFG_09(0x12)
<3>[    3.249630] [VIB] ++ max77804k_haptic_probe
<3>[    3.249687] [VIB] -- max77804k_haptic_probe
<6>[    3.249777] [SSP] ssp_probe
<3>[    3.249781] [SSP] probe exit : lpm 0, recovery 1
<6>[    3.249908] max86900_probe - start
<4>[    3.249942] max77826_ldo4: Failed to create debugfs directory
<6>[    3.249946] max86900_regulator_onoff - onoff = 1
<6>[    3.249953] max77826_get_voltage_register: id=3, reg=0x23, shift=0x0, mask=0x7f
<6>[    3.250306] max77826_ldo_set_voltage: id=3, reg=0x23, mask=0x7f, val=0x28, new=0x28
<6>[    3.250919] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.251270] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.265613] mmc0: BKOPS_EN bit = 0
<4>[    3.283517] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.283564] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.283580] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.283641] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.283745] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.283807] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.303300] mmc0: new HS400 MMC card at address 0001
<6>[    3.303521] [mmc_blk_probe]mmcblk0: mmc0:0001 MAG2GC 14.6 GiB , card->type:0
<6>[    3.303622] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 512 KiB
<6>[    3.305904]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
<4>[    3.343522] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.343570] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.343588] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.343698] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.343752] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.343854] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.394606] cypress_touchkey 21-0020: tkey_i2c_check: ic_fw_ver = 0x1d, module_ver = 0x06, CY device = 0x10
<4>[    3.403512] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.403556] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.403571] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.403670] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.403724] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.403822] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.434104] cypress_touchkey 21-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
<6>[    3.434177] cypress_touchkey 21-0020: cypress_touchkey_interrupt: not real interrupt (1).
<4>[    3.463514] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.463558] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.463573] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.463672] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.463725] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.463779] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.523513] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.523558] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.523573] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x57
<3>[    3.523628] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.523726] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.523780] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.543499] max86900_read_reg -read transfer error
<4>[    3.583510] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.583555] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.583570] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.583671] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.583725] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.583779] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.643513] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.643557] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.643572] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.643627] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.643725] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.643780] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.703513] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.703557] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.703572] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.703627] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.703726] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.703780] qup_i2c f9923000.i2c: OP Flags: 10
<6>[    3.734628] mmc2: new ultra high speed SDR50 SDXC card at address 59b4
<6>[    3.734794] [mmc_blk_probe]mmcblk1: mmc2:59b4 NCard 59.8 GiB , card->type:1
<6>[    3.739128]  mmcblk1: p1 < p5 >
<4>[    3.763516] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.763561] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.763576] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.763677] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.763732] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.763831] qup_i2c f9923000.i2c: OP Flags: 10
<4>[    3.823513] qup_i2c f9923000.i2c: i2c_scl: 1, i2c_sda: 1
<4>[    3.823558] qup_i2c f9923000.i2c: Bus still busy, status 132100
<3>[    3.823572] qup_i2c f9923000.i2c: Transaction timed out, SL-AD = 0x51
<3>[    3.823671] qup_i2c f9923000.i2c: I2C Status: 132100
<3>[    3.823724] qup_i2c f9923000.i2c: QUP Status: 0
<3>[    3.823822] qup_i2c f9923000.i2c: OP Flags: 10
<3>[    3.843499] max86900_read_reg -read transfer error
<3>[    3.843553] max86900_probe WHOAMI read fail
<4>[    3.843658] max77826_ldo4: Failed to create debugfs directory
<6>[    3.843662] max86900_regulator_onoff - onoff = 0
<6>[    3.843667] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<3>[    3.844284] max86900_probe failed
<6>[    3.844384] vfsspi_init
<6>[    3.844410] vfsspi_probe
<6>[    3.844440] vfsspi_parse_dt: sleepPin=57
<6>[    3.844454] vfsspi_parse_dt: drdyPin=64
<3>[    3.844458] vfsspi_parse_dt: fail to get ocp_pin
<6>[    3.844566] vfsspi_parse_dt: ocp_en=63
<6>[    3.844579] vfsspi_parse_dt: ldo_pin=130
<3>[    3.844583] vfsspi_parse_dt: not set ldo2 in dts
<6>[    3.844637] vfsspi_parse_dt: ldocontrol=1
<6>[    3.844646] vfsspi_parse_dt: orient=1
<6>[    3.844649] vfsspi_platformInit
<6>[    3.844655] vfsspi_platformInit ocp off
<6>[    3.844662] vfsspi_platformInit ldo off
<6>[    3.844768] vfsspi_disable_irq
<6>[    3.844773] vfsspi_platformInit drdy value =0
<6>[    3.844775] vfsspi_platformInit sleep value =0
<6>[    3.844777] vfsspi_platformInit ldo en value =0
<6>[    3.844780] vfsspi_platformInit vfsspi_platofrminit, status=0
<6>[    3.849107] vfsspi_regulator_onoff: on ocp_en: enable
<6>[    3.855230] vfsspi_hardReset
<6>[    3.883697] ValiditySensor: spi_sync returned 0
<6>[    3.883702] vfsspi_probe sensor type is RAPTOR
<6>[    3.883710] vfsspi_regulator_onoff: off ocp_en: enable
<6>[    3.883804] vfsspi_probe success...
<6>[    3.883819] vfsspi_init init is successful
<6>[    3.883830] func:max77804k_muic_init
<6>[    3.884049] func:max77804k_muic_probe
<6>[    3.884177] max77804k-muic max77804k-muic: adc:320 chgtype:324
<6>[    3.884194] dev_set_drvdata:max77804k_muic_probe
<6>[    3.884198] max77804k-muic max77804k-muic: func:max77804k_muic_set_adcdbset value:2
<6>[    3.884203] max77804k-muic max77804k-muic: max77804k_muic_set_adcdbset: ADCDBSET(0x02)
<6>[    3.885507] max77804k_muic_probe: ADCMODE(0x0)
<6>[    3.885773] max77804k_muic_probe: CDETCTRL1(0x0d)
<6>[    3.885804] max77804k-muic max77804k-muic: func:max77804k_muic_irq_init
<6>[    3.891357] max77804k-muic max77804k-muic: adc:320 chgtype:324 vbvolt:328
<6>[    3.891709] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=1, val=0
<6>[    3.892060] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=2, val=0
<6>[    3.892410] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=3, val=0
<6>[    3.892760] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=4, val=3f
<6>[    3.893111] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=5, val=42
<6>[    3.893461] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=6, val=40
<6>[    3.893829] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=7, val=1
<6>[    3.894180] max77804k-muic max77804k-muic: max77804k_muic_irq_init: reg=8, val=11
<6>[    3.894186] max77804k-muic max77804k-muic: set path to (0)
<6>[    3.894190] max77804k_muic_set_safeout: MUIC safeout path=0
<6>[    3.896224] max77804k_muic_probe: uart en bit : 0
<6>[    3.896228] max77804k_muic_probe: MUIC path is OPEN from now.
<6>[    3.896582] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[    3.896587] notifier sec_otg_register_booster 169: register max77804k
<6>[    3.896690] usbcore: registered new interface driver snd-usb-audio
<6>[    3.898017] (NULL device *): es705_bus_init(): registered as SLIMBus
<6>[    3.904106] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
<6>[    3.904587] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
<6>[    3.905225] platform qcom,msm-voip-dsp.52: Driver msm-voip-dsp requests probe deferral
<6>[    3.905544] platform qcom,msm-pcm-voice.53: Driver msm-pcm-voice requests probe deferral
<6>[    3.907498] ocmem: Notifier registered for 5
<6>[    3.907950] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.908008] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.908940] Mirror/redirect action on
<6>[    3.908946] u32 classifier
<6>[    3.908949]     Actions configured
<6>[    3.908956] Netfilter messages via NETLINK v0.30.
<6>[    3.908985] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    3.909172] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.909193] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    3.909197] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    3.909311] xt_time: kernel timezone is -0000
<6>[    3.909321] 939-23012-001-quicksec-vpnclient-for-android-3.3.1-2811-b2567729009d-2015-01-30_13-36-53
<6>[    3.909325] vpnclient kernel spd loaded.
<6>[    3.909472] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.909601] arp_tables: (C) 2002 David S. Miller
<6>[    3.909629] TCP: bic registered
<6>[    3.909634] TCP: cubic registered
<6>[    3.909638] TCP: westwood registered
<6>[    3.909641] TCP: htcp registered
<6>[    3.909645] Initializing XFRM netlink socket
<6>[    3.909810] NET: Registered protocol family 10
<6>[    3.910913] Mobile IPv6
<6>[    3.910929] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    3.911011] IPv6 over IPv4 tunneling driver
<6>[    3.911235] NET: Registered protocol family 17
<6>[    3.911251] NET: Registered protocol family 15
<5>[    3.911283] Bridge firewalling registered
<6>[    3.911292] Ebtables v2.0 registered
<6>[    3.911313] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    3.911346] sii8240_init_cable_notify register extcon notifier for usb and ta
<6>[    3.911353] sec_otg_init_cable_notify register extcon notifier for usb and ta
<5>[    3.911937] Registering SWP/SWPB emulation handler
<6>[    3.916456] sec_debug_subsys_init: msm_shared_ram_phys=fa00000 SMEM_ID_VENDOR2=136 size=8780
<6>[    3.916469] sec_debug_subsys_init: krait(fa1b330) rpm(fa1bbf8) modem(fa1c46c) dsps(fa1cce0)
<3>[    3.916710] [SCFS] ERROR compr_init(151): cannot initialize compressor lzo, error -2
<3>[    3.916813] [SCFS] ERROR scfs_init(761): compressor initialization was failed.
<6>[    3.916994] max77826_get_op_register: id=16, reg=0x14, mask=0x8, pattern=0x8
<6>[    3.917358] max77826_get_op_register: id=15, reg=0x14, mask=0x2, pattern=0x2
<6>[    3.917716] max77826_get_op_register: id=13, reg=0x13, mask=0x8, pattern=0x8
<6>[    3.918073] max77826_get_op_register: id=11, reg=0x12, mask=0x80, pattern=0x80
<6>[    3.918430] max77826_get_op_register: id=10, reg=0x12, mask=0x20, pattern=0x20
<6>[    3.918787] max77826_get_op_register: id=9, reg=0x12, mask=0x8, pattern=0x8
<6>[    3.919144] max77826_get_op_register: id=8, reg=0x12, mask=0x2, pattern=0x2
<6>[    3.919501] max77826_get_op_register: id=7, reg=0x11, mask=0x80, pattern=0x80
<6>[    3.919857] max77826_get_op_register: id=6, reg=0x11, mask=0x20, pattern=0x20
<6>[    3.920214] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    3.920571] max77826_get_op_register: id=4, reg=0x11, mask=0x2, pattern=0x2
<6>[    3.920928] max77826_get_op_register: id=3, reg=0x10, mask=0x80, pattern=0x80
<6>[    3.921285] max77826_get_op_register: id=2, reg=0x10, mask=0x20, pattern=0x20
<6>[    3.921642] max77826_get_op_register: id=1, reg=0x10, mask=0x8, pattern=0x8
<6>[    3.922000] max77826_get_op_register: id=0, reg=0x10, mask=0x2, pattern=0x2
<6>[    3.922712] gdsc_oxili_gx: disabling
<6>[    3.922725] gdsc_venus: disabling
<6>[    3.923050] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.923094] sec_jack_probe : Registering jack driver
<6>[    3.923117] sec_jack_populate_dt_pdata : earjack-detect-gpio =445
<6>[    3.923132] sec_jack_populate_dt_pdata : earjack-sendend-gpio =77
<6>[    3.923145] sec_jack_populate_dt_pdata : earjack-micbias-gpio =85
<6>[    3.923150] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.923156] sec_jack_populate_dt_pdata : earjack-fsa_en-gpio =310
<6>[    3.923219] sec_jack_populate_dt_pdata : 4, 3, 10000, 10, 0
<6>[    3.923269] sec_jack_populate_dt_pdata : 4, 950, 10000, 10, 0
<6>[    3.923342] sec_jack_populate_dt_pdata : 4, 2400, 10000, 10, 1
<6>[    3.923438] sec_jack_populate_dt_pdata : 4, 9999, 10000, 10, 1
<6>[    3.923465] sec_jack_populate_dt_pdata : 3, 0, 0, 155
<6>[    3.923538] sec_jack_populate_dt_pdata : 3, 1, 156, 313
<6>[    3.923610] sec_jack_populate_dt_pdata : 3, 2, 314, 643
<6>[    3.923615] sec_jack_populate_dt_pdata - mpp-channel-scaling - 4 1 3
<6>[    3.923623] pcal6416a_gpio_request
<6>[    3.923628] pcal6416a_gpio_direction_output(off=[10], val=[1])
<6>[    3.923738] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.923902] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.924565] sec_jack_detect_work: detect_irq(0)
<6>[    3.924962] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.925123] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.925829] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.925995] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    3.926152] gpio-keys gpio_keys.96: [Keys] no regulator: ignoring
<6>[    3.926277] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:home_key, gpio:428, code:172, type:1, debounce:15
<6>[    3.926300] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_down, gpio:427, code:114, type:1, debounce:15
<6>[    3.926323] gpio-keys gpio_keys.96: gpio_keys_get_devtree_pdata: label:volume_up, gpio:430, code:115, type:1, debounce:15
<6>[    3.926345] gpio-keys gpio_keys.96: [Hall_IC] device tree was founded
<7>[    3.926419] gpio_set_debounce: gpio-428 status -22
<7>[    3.926533] gpio_set_debounce: gpio-427 status -22
<7>[    3.926641] gpio_set_debounce: gpio-430 status -22
<6>[    3.926814] input: gpio-keys as /devices/gpio_keys.96/input/input4
<7>[    3.926822] [HALL_IC] : gpio_keys_open
<6>[    3.926988] gpio_keys_gpio_report_event: home_key key is released
<3>[    3.926993] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
<6>[    3.927084] gpio_keys_gpio_report_event: volume_down key is released
<3>[    3.927089] sec_debug_check_crash_key code 114 value 0 state 0 enable 0
<6>[    3.927198] gpio_keys_gpio_report_event: volume_up key is released
<3>[    3.927202] sec_debug_check_crash_key code 115 value 0 state 0 enable 0
<6>[    3.927542] qcom,qpnp-rtc qpnp-rtc-ea52aa00: setting system clock to 2014-05-25 17:44:44 UTC (1401039884)
<6>[    3.927547] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<3>[    3.927554] [syscamera][msm_companion_init_module::2404]init companion module
<6>[    3.927707] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    3.927957] [syscamera][msm_companion_probe::2285][E]
<3>[    3.928059] [syscamera][msm_companion_get_dt_data::1433][qcom,cci-master::0][rc::0]
<6>[    3.928115] [syscamera][msm_companion_get_dt_data::1458]slave addr = 7a, sensor id = 73c1
<3>[    3.928120] [syscamera][msm_companion_probe::2336] i2c_func_tbl=cci
<3>[    3.928271] [syscamera][msm_companion_probe::2365] probe success
<3>[    3.928380] [syscamera][msm_companion_spi_probe::2224][E]
<6>[    3.928487] qcom_companion spi7.0: irq[0] cs[0] CPHA[0] CPOL[0] CS_HIGH[0]
<6>[    3.928492] qcom_companion spi7.0: max_speed[48000000]
<3>[    3.928498] [syscamera][msm_companion_spi_setup::2122]gpio-irq 28, rc 0
<6>[    3.928506] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.928721] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<3>[    3.928749] [syscamera][msm_companion_spi_setup::2210]spi probe success =0 X
<6>[    3.928869] Driver for 1-wire Dallas network protocol.
<6>[    3.929030] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<3>[    3.929113]
<3>[    3.929115] w1_gpio_msm_probe start
<6>[    3.929186] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.929345] input: w1 as /devices/onewire.89/input/input5
<3>[    3.929406] w1_uevent master_dev name = w1_bus_master1
<6>[    3.929490] w1_add_master_device : W1 workqueue will start
<6>[    3.929640] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.929717] msm_thermal:interrupt_mode_init Interrupt mode init
<6>[    3.929827] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.930501] sec_bat_parse_dt reading bat_int_gpio is empty
<6>[    3.930511] sec_bat_parse_dt: ta_irq_attr is Empty
<6>[    3.930521] sec_bat_parse_dt: chg_temp_check: 0
<6>[    3.930680] sec_bat_parse_dt: vendor : SDI SDI, technology : 2, cable_check_type : 6
<6>[    3.930682] cable_source_type : 1, use_wireless_to_pogo : 0, event_waiting_time : 600
<6>[    3.930685] polling_type : 1, initial_count : 3, check_count : 0
<6>[    3.930687] check_adc_max : 1440, check_adc_min : 0
<6>[    3.930688] ovp_uvlo_check_type : 3, thermal_source : 2
<6>[    3.930690] temp_check_type : 2, temp_check_count : 1
<6>[    3.930696] board_battery_init : assign temp adc table
<6>[    3.935383] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    3.935742] max77804k_get_input_current: CHG_CNFG_09(0x12)
<3>[    3.935749] max17048_get_current_average: Fail to get psy (battery)
<6>[    3.937250] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.958968] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(232), Temp-ADC(34444)
<3>[    3.959677] max17048_rcomp_update: Fail to get psy (battery)
<6>[    3.959734] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    3.960442] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.960448] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    3.960456] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4230mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(232),is_hc_usb(0)
<6>[    3.960738] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    3.960765] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    3.960774] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    3.961353] sec_chg_get_property: reg_data(93)
<6>[    3.961364] sec_bat_check_cable_result_callback set ldo on
<4>[    3.961379] max77826_ldo6: Failed to create debugfs directory
<6>[    3.961386] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    3.961798] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    3.962512] sec_bat_check_cable_result_callback set ldo off
<4>[    3.962522] max77826_ldo6: Failed to create debugfs directory
<6>[    3.962528] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    3.963249] sec-battery battery.98: sec_battery_probe: SEC Battery Driver Loaded
<6>[    3.963464] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.963676] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.963698] tspdrv: tspdrv_probe.
<6>[    3.963719] tspdrv_parse_dt:382, changed_chip not specified
<7>[    3.963805] ImmVibeSPI_ForceOut_Initialize.
<4>[    3.963827] 8084_l23: Failed to create debugfs directory
<7>[    3.963835] haptic power_off is finished.
<7>[    3.963840] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[    3.964104] msm8974-asoc-taiko fe02c000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
<6>[    3.964119] clock_late_init: Removing enables held for handed-off clocks
<6>[    3.964272] platform fe02c000.sound: Driver msm8974-asoc-taiko requests probe deferral
<6>[    3.966963] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    3.967577] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    3.968087] ALSA device list:
<6>[    3.968093]   No soundcards found.
<4>[    3.968131] Warning: unable to open an initial console.
<5>[    3.969249] init: init started!
<6>[    3.969595] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<7>[    3.971203] SELinux: 2048 avtab hash slots, 4855 rules.
<6>[    3.971218] SELinux:  Android master kernel running Android M policy in compatibility mode.
<7>[    3.972140] SELinux: 2048 avtab hash slots, 4855 rules.
<7>[    3.972150] SELinux:  1 users, 2 roles, 530 types, 0 bools, 1 sens, 1024 cats
<7>[    3.972158] SELinux:  87 classes, 4855 rules
<7>[    3.972709] SELinux:  Completing initialization.
<7>[    3.972714] SELinux:  Setting up existing superblocks.
<7>[    3.972726] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    3.972740] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    3.973155] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    3.973167] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    3.973181] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    3.973196] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<6>[    3.991490] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(232), Temp-ADC(34447)
<6>[    3.992435] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    3.993364] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    3.993370] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    3.993377] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4230mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(232),is_hc_usb(0)
<6>[    3.993384] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    3.993391] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<7>[    3.995389] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    3.995401] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    3.995411] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    3.995421] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    3.995439] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    3.995495] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    3.995515] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<5>[    4.007763] init: (Initializing SELinux enforcing took 0.04s.)
<5>[    4.011321] init: init second stage started!
<7>[    4.423542] [keys] flip_cover_work : 1 code 0x15
<3>[    4.690011] init: waitpid failed: No child processes
<3>[    4.690435] init: property_set("ro.hardware", "qcom") failed
<3>[    4.690544] init: property_set("ro.boot.bootdevice", "msm_sdcc.1") failed
<5>[    4.690885] init: (Loading properties from /default.prop took 0.00s.)
<3>[    4.691272] init: /init.rc: 57: invalid command 'load_all_props'
<3>[    4.691393] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
<5>[    4.691586] init: (Parsing /init.recovery.usb.rc took 0.00s.)
<5>[    4.691640] init: (Parsing /init.recovery.qcom.rc took 0.00s.)
<5>[    4.691655] init: (Parsing /init.rc took 0.00s.)
<5>[    4.691839] init: Starting service 'ueventd'...
<5>[    4.692055] init: Starting service 'healthd'...
<5>[    4.692221] init: Waiting for /dev/.coldboot_done...
<5>[    4.693405] ueventd: ueventd started!
<3>[    4.694015] healthd: wakealarm_init: timerfd_create failed
<3>[    4.831842] w1_uevent master_dev name = w1_bus_master1
<6>[    4.879016] max77804k_get_charger_state: CHG_DTLS : 0x 1
<6>[    4.880062] max77804k_get_health_state: bat_dtls(0x3) int_mask(0xde)
<6>[    4.881636] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x1
<6>[    4.882161] sec_chg_get_property: reg_data(93)
<6>[    4.882688] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    4.897118] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    4.897647] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    4.899457] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    4.900366] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    4.900372] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<3>[    4.900381] power_supply sec-fuelgauge: driver failed to report `energy_full' property: 4294967274
<6>[    5.049713] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.050248] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    5.052074] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    5.073896] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(233), Temp-ADC(34441)
<6>[    5.074817] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    5.075736] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    5.075742] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    5.075749] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4322mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(233),is_hc_usb(0)
<6>[    5.075755] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    5.075762] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<3>[    5.700130] init: Timed out waiting for /dev/.coldboot_done
<5>[    5.700212] init: Waiting for /dev/.coldboot_done took 1.01s.
<7>[    5.701362] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<5>[    5.702864] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
<3>[    5.702984] init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
<3>[    5.703093] init: cannot expand '${ro.product.model}' while writing to '/sys/class/android_usb/android0/iProduct'
<5>[    5.703452] init: (Loading properties from /system/build.prop took 0.00s.)
<5>[    5.703478] init: (Loading properties from /vendor/build.prop took 0.00s.)
<5>[    5.703523] init: (Loading properties from /factory/factory.prop took 0.00s.)
<3>[    5.703665] init: /recovery not specified in fstab
<5>[    5.703763] init: (Loading properties from /data/local.prop took 0.00s.)
<3>[    5.703785] init: Unable to open persistent property directory "/data/property": No such file or directory
<3>[    5.703957] init: Detected MSM SOC ID=194 SOC VER=65536 BOARD TYPE=MTP
<5>[    5.705676] init: Starting service 'set_permissive'...
<3>[    5.706879] init: Warning!  Service recovery needs a SELinux domain defined; please fix!
<5>[    5.706946] init: Starting service 'recovery'...
<3>[    5.707249] init: Warning!  Service qseecomd needs a SELinux domain defined; please fix!
<5>[    5.707365] init: Starting service 'qseecomd'...
<6>[    5.707587] usb: enabled: 0, dev->enabled: 0
<6>[    5.707730] usb: enabled: 0, dev->enabled: 0
<6>[    5.707867] usb: enabled: 1, dev->enabled: 0
<7>[    5.707873] usb: enable_store f_holder->f:mtp
<7>[    5.707876] usb: enable_store f_holder->f:adb
<7>[    5.707882] usb: enable_store vendor=4e8,product=6860,bcdDevice=232
<7>[    5.707886] ,Class=0,SubClass=0,Protocol=0
<7>[    5.707889] usb: enable_store next cmd : usb_add_config
<5>[    5.707934] init: Starting service 'adbd'...
<6>[    5.708142] usb: enabled: 0, dev->enabled: 1
<5>[    5.708160] init: Service 'adbd' is being killed...
<6>[    5.708219] usb: enabled: 1, dev->enabled: 0
<7>[    5.708225] usb: enable_store f_holder->f:mtp
<7>[    5.708228] usb: enable_store f_holder->f:adb
<7>[    5.708234] usb: enable_store vendor=4e8,product=6860,bcdDevice=232
<7>[    5.708237] ,Class=0,SubClass=0,Protocol=0
<7>[    5.708242] usb: enable_store next cmd : usb_add_config
<6>[    5.715446] adb_open
<6>[    5.715453] mtp_bind_config
<6>[    5.715475] adb_bind_config
<5>[    5.722723] init: Service 'set_permissive' (pid 212) exited with status 0
<5>[    5.725132] init: Service 'qseecomd' (pid 214) exited with status 255
<5>[    5.725149] init: Service 'qseecomd' (pid 214) killing any children in process group
<6>[    5.736969] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(0), power(0)
<6>[    5.738729] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(0), power(0)
<6>[    5.738907] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.738912] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.738917] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.738922] mdss_fb_set_backlight: [BL1] bkl_lvl (162), bl_updated(1), power(1)
<6>[    5.738928] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[    5.739083] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[    5.739089] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.739096] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[    5.740262] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.740267] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.740271] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.740275] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.740281] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<4>[    5.746987] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747012] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747033] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747055] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747077] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747098] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747120] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747141] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747154] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747159] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747164] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747169] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747175] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747180] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747185] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747190] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747195] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747200] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747206] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747211] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747216] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747221] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<4>[    5.747226] vm_start=b59d0000 vm_end=b69c0000 vm_page_prot=1799
<6>[    5.754463] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[    5.754468] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.754475] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[    5.754486] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[    5.754489] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<6>[    5.754493] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[    5.754496] mdss_fb_set_backlight: [BL1] bkl_lvl (0), bl_updated(1), power(1)
<6>[    5.754500] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<3>[    5.757162] samsung_dsi_panel_event_handler : unknown event (9)
<3>[    5.757187] samsung_dsi_panel_event_handler : unknown event (1)
<4>[    5.760740] mdss_dsi_on:1040 Panel already on.
<6>[    5.760748] mdss_dsi_panel_on : ++
<6>[    5.760751] mdss_dsi_panel_on: ctrl=e9ee8810 ndx=0
<6>[    5.763123] mipi_samsung_manufacture_id: manufacture_id1=60
<6>[    5.766274] mipi_samsung_manufacture_id: manufacture_id2=28
<6>[    5.769174] mipi_samsung_manufacture_id: manufacture_id3=13
<6>[    5.769177] mipi_samsung_manufacture_id: manufacture_id=602813
<6>[    5.769181] set_panel_rev : 0x13 EVT1_K_fhd_REVI
<6>[    5.769183] mdss_dsi_panel_read_func : ++
<6>[    5.771983] mipi_samsung_disp_send_cmd done..
<6>[    5.780988] read_reg : C8[2] : 36 11 .
<6>[    5.784025] mipi_samsung_disp_send_cmd done..
<6>[    5.784028] manufacture_date = (20140617) - year(2014) month(6) day(17)
<6>[    5.786876] mipi_samsung_disp_send_cmd done..
<6>[    5.789147] sec-battery battery.98: sec_pogo_get_property: pogo charger is online (0)
<6>[    5.795414] read_reg : D6[5] : 93 10 97 21 ae .
<6>[    5.798259] mipi_samsung_disp_send_cmd done..
<6>[    5.798264] mipi_samsung_ddi_id_read : 93 10 97 21 ae
<6>[    5.801310] mipi_samsung_disp_send_cmd done..
<6>[    5.809882] read_reg : C8[7] : 01 18 01 17 01 1c 07 .
<6>[    5.812717] mipi_samsung_disp_send_cmd done..
<6>[    5.815769] mipi_samsung_disp_send_cmd done..
<6>[    5.835929] read_reg : C8[15] : 82 7f 82 7c 7c 7c 7c .7c 7b 7e 7d 7e 7f 7f .7f .
<6>[    5.838765] mipi_samsung_disp_send_cmd done..
<6>[    5.841603] mipi_samsung_disp_send_cmd done..
<6>[    5.850202] read_reg : B6[1] : 13 .
<6>[    5.853051] mipi_samsung_disp_send_cmd done..
<6>[    5.855889] mipi_samsung_disp_send_cmd done..
<6>[    5.864907] read_reg : FD[1] : bc .
<6>[    5.867971] mipi_samsung_disp_send_cmd done..
<6>[    5.870812] mipi_samsung_disp_send_cmd done..
<6>[    5.879849] read_reg : A1[4] : 0b 9f 0c 56 .
<6>[    5.882883] mipi_samsung_disp_send_cmd done..
<6>[    5.882887] coordinate_tunning x : 2975, y : 3158, tune_number : 5
<6>[    5.882891] mdss_dsi_panel_read_func : --
<6>[    5.882894] mdss_dsi_panel_dimming_init : ++
<6>[    5.885758] mipi_samsung_disp_send_cmd done..
<6>[    5.917867] read_reg : C8[33] : 00 2a 00 12 00 5d 60 .62 60 5e 5f 5d 4c 4e .4c 51 56 51 60 64 60 .5e 63 63 48 59 54 5e .67 4d 02 03 02 .
<6>[    5.920911] mipi_samsung_disp_send_cmd done..
<6>[    5.920916] gamma_cell_determine ldi_revision: 0x602813
<6>[    5.920974] gamma_init_K_fhd_revI : start !!
<6>[    5.920986] gamma_init_K_fhd_revI : start !!
<6>[    5.920994] gamma_init_K_fhd_revI : start !!
<6>[    5.921003] gamma_init_K_fhd_revI : start !!
<6>[    5.921011] gamma_init_K_fhd_revI : start !!
<6>[    5.921020] gamma_init_K_fhd_revI : start !!
<6>[    5.921029] gamma_init_K_fhd_revI : start !!
<6>[    5.921037] gamma_init_K_fhd_revI : start !!
<6>[    5.921046] gamma_init_K_fhd_revI : start !!
<6>[    5.921054] gamma_init_K_fhd_revI : start !!
<6>[    5.921063] gamma_init_K_fhd_revI : start !!
<6>[    5.921072] gamma_init_K_fhd_revI : start !!
<6>[    5.921081] gamma_init_K_fhd_revI : start !!
<6>[    5.921090] gamma_init_K_fhd_revI : start !!
<6>[    5.921099] gamma_init_K_fhd_revI : start !!
<6>[    5.921107] gamma_init_K_fhd_revI : start !!
<6>[    5.921117] gamma_init_K_fhd_revI : start !!
<6>[    5.921125] gamma_init_K_fhd_revI : start !!
<6>[    5.921135] gamma_init_K_fhd_revI : start !!
<6>[    5.921144] gamma_init_K_fhd_revI : start !!
<6>[    5.921153] gamma_init_K_fhd_revI : start !!
<6>[    5.921162] gamma_init_K_fhd_revI : start !!
<6>[    5.921172] gamma_init_K_fhd_revI : start !!
<6>[    5.921181] gamma_init_K_fhd_revI : start !!
<6>[    5.921191] gamma_init_K_fhd_revI : start !!
<6>[    5.921200] gamma_init_K_fhd_revI : start !!
<6>[    5.921210] gamma_init_K_fhd_revI : start !!
<6>[    5.921220] gamma_init_K_fhd_revI : start !!
<6>[    5.921230] gamma_init_K_fhd_revI : start !!
<6>[    5.921239] gamma_init_K_fhd_revI : start !!
<6>[    5.921249] gamma_init_K_fhd_revI : start !!
<6>[    5.921259] gamma_init_K_fhd_revI : start !!
<6>[    5.921269] gamma_init_K_fhd_revI : start !!
<6>[    5.921279] gamma_init_K_fhd_revI : start !!
<6>[    5.921289] gamma_init_K_fhd_revI : start !!
<6>[    5.921300] gamma_init_K_fhd_revI : start !!
<6>[    5.921310] gamma_init_K_fhd_revI : start !!
<6>[    5.921320] gamma_init_K_fhd_revI : start !!
<6>[    5.921331] gamma_init_K_fhd_revI : start !!
<6>[    5.921341] gamma_init_K_fhd_revI : start !!
<6>[    5.921353] gamma_init_K_fhd_revI : start !!
<6>[    5.921363] gamma_init_K_fhd_revI : start !!
<6>[    5.921375] gamma_init_K_fhd_revI : start !!
<6>[    5.921386] gamma_init_K_fhd_revI : start !!
<6>[    5.921397] gamma_init_K_fhd_revI : start !!
<6>[    5.921409] gamma_init_K_fhd_revI : start !!
<6>[    5.921420] gamma_init_K_fhd_revI : start !!
<6>[    5.921431] gamma_init_K_fhd_revI : start !!
<6>[    5.921443] gamma_init_K_fhd_revI : start !!
<6>[    5.921455] gamma_init_K_fhd_revI : start !!
<6>[    5.921467] gamma_init_K_fhd_revI : start !!
<6>[    5.921479] gamma_init_K_fhd_revI : start !!
<6>[    5.921491] gamma_init_K_fhd_revI : start !!
<6>[    5.921503] gamma_init_K_fhd_revI : start !!
<6>[    5.921515] gamma_init_K_fhd_revI : start !!
<6>[    5.921527] gamma_init_K_fhd_revI : start !!
<6>[    5.921540] gamma_init_K_fhd_revI : start !!
<6>[    5.921552] gamma_init_K_fhd_revI : start !!
<6>[    5.921564] gamma_init_K_fhd_revI : start !!
<6>[    5.921576] gamma_init_K_fhd_revI : start !!
<6>[    5.921594] smart_dimming_init done
<6>[    5.921596] mdss_dsi_panel_dimming_init : --
<6>[    5.950929] mipi_samsung_disp_send_cmd done..
<5>[    5.998443] ueventd: Coldboot took 1.30s.
<6>[    6.056600] mipi_samsung_disp_send_cmd done..
<6>[    6.056608] get_elvss_tempcompen_control_set for ELVSS CONTROL acl(0), temp(20) B8(0x19)
<6>[    6.056613] get_elvss_tempcompen_control_set2 for ELVSS CONTROL acl(0), temp(20) B0(0x14) B6(0x13)
<6>[    6.056619] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,2,3)11,id3(0x13)
<6>[    6.056624] mipi_samsung_disp_send_cmd : panel is off state!!
<6>[    6.056627] [LCD]mipi_samsung_disp_send_cmd:Undefined command
<6>[    6.056633] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[    6.059829] mipi_samsung_disp_send_cmd done..
<3>[    6.059832] [mdnie lite] is negative Mode On = 0
<3>[    6.063006] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), AUTO(4), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[    6.063010] mdss_dsi_panel_on : --
<6>[    6.068629] now restoring TE/ rdptr_enabled++
<6>[    6.083278] mipi_samsung_disp_send_cmd done..
<6>[    6.083282] [check_te_step1] ++
<6>[    6.085703] now restoring TE/ rdptr_enabled++
<6>[    6.104194] now restoring TE/ rdptr_enabled++
<6>[    6.104202] [check_te_step1] first TE = 18487
<6>[    6.104205] [check_te_step1] fctrl = 5e
<6>[    6.104723] mipi_samsung_disp_send_cmd done..
<6>[    6.104726] [check_te_step1] --
<6>[    6.104728] [check_te_step2] ++
<6>[    6.120956] now restoring TE/ rdptr_enabled++
<6>[    6.137700] now restoring TE/ rdptr_enabled++
<6>[    6.137708] [check_te_step2] second TE = 16740
<6>[    6.137712] [check_te_step2] offset = 0
<6>[    6.138230] mipi_samsung_disp_send_cmd done..
<6>[    6.138233] [check_te_step2] --
<6>[    6.138236] [check_te_step3] ++
<6>[    6.154438] now restoring TE/ rdptr_enabled++
<6>[    6.171182] now restoring TE/ rdptr_enabled++
<6>[    6.171190] [check_te_step3] finals TE is (16739) - OK
<6>[    6.171193] [check_te_step3] --
<6>[    6.171270] mipi_samsung_disp_send_cmd done..
<6>[    6.171347] mipi_samsung_disp_send_cmd done..
<6>[    6.171646] read_reg : A[1] : 9c .
<6>[    6.171722] mipi_samsung_disp_send_cmd done..
<6>[    6.171725] DISPLAY_ON
<3>[    6.172860] samsung_dsi_panel_event_handler : unknown event (9)
<6>[    6.173188] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[    6.173198] [LCD]make_brightcontrol_set:bright_level: 162, candela_idx: 51( 220 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[    6.202285] mipi_samsung_disp_send_cmd done..
<3>[    6.249366] samsung_dsi_panel_event_handler : unknown event (9)
<6>[    6.253521] max77804k_chgin_init_work
<6>[    6.267524] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.267540] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.279649] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    6.280203] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[    6.282067] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    6.303908] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(233), Temp-ADC(34438)
<6>[    6.304834] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    6.305752] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    6.305758] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    6.305765] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4368mV),Inow(450mA),Imax(0mA),SOC(100%),Tbat(233),is_hc_usb(0)
<6>[    6.305772] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    6.305780] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<6>[    6.306307] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.306322] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.346219] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.346232] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.386187] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<7>[    6.386201] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
<6>[    6.410455] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
<7>[    6.410469] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
<6>[    6.411355] SELinux:  Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
<6>[    6.421148] FAT-fs (mmcblk0p2[179:2]): trying to mount...
<3>[    6.421159] FAT-fs (mmcblk0p2[179:2]): Unrecognized mount option "ro" or missing value
<3>[    6.421264] FAT-fs (mmcblk0p2[179:2]): failed to mount!
<6>[    6.423600] FAT-fs (mmcblk0p2[179:2]): trying to mount...
<6>[    6.428230] FAT-fs (mmcblk0p2[179:2]): mounted successfully!
<7>[    6.428246] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
<6>[    6.428861] FAT-fs (mmcblk0p2[179:2]): trying to unmount...
<6>[    6.428868] FAT-fs (mmcblk0p2[179:2]): unmounted successfully!
<6>[    6.430802] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<3>[    6.430811] FAT-fs (mmcblk0p1[179:1]): Unrecognized mount option "ro" or missing value
<3>[    6.430868] FAT-fs (mmcblk0p1[179:1]): failed to mount!
<6>[    6.433601] FAT-fs (mmcblk0p1[179:1]): trying to mount...
<6>[    6.438313] FAT-fs (mmcblk0p1[179:1]): mounted successfully!
<7>[    6.438321] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
<6>[    6.438943] FAT-fs (mmcblk0p1[179:1]): trying to unmount...
<6>[    6.438950] FAT-fs (mmcblk0p1[179:1]): unmounted successfully!
<6>[    6.445975] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[    6.445987] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[    6.472282] SELinux:  Context u:object_r:mpctl_socket:s0 is not valid (left unmapped).
<6>[    6.472416] SELinux:  Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
<6>[    6.473137] SELinux:  Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
<6>[    6.473401] SELinux:  Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
<6>[    6.473673] SELinux:  Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
<6>[    6.474016] SELinux:  Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
<6>[    6.474210] SELinux:  Context u:object_r:user_profile_foreign_dex_data_file:s0 is not valid (left unmapped).
<6>[    6.668919] SELinux:  Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
<6>[    6.669033] SELinux:  Context u:object_r:bootstat_data_file:s0 is not valid (left unmapped).
<6>[    6.903518] max77804k-muic max77804k-muic: func:max77804k_muic_init_detect
<6>[    6.904050] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[    6.904679] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:-1 ret:0
<6>[    6.904684] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x42
<6>[    6.904692] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x2, vbvolt:64 adc open prev:1
<6>[    6.904698] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: ATTACHED/CHANGED
<6>[    6.904702] max77804k-muic max77804k-muic: max77804k_muic_handle_attach:
<6>[    6.904707] max77804k-muic max77804k-muic: st1:0x3f st2:0x42
<6>[    6.904711] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x2, vbvolt:64
<6>[    6.904716] max77804k-muic max77804k-muic: chgdetrun:0x0, prev state:0x0
<6>[    6.904722] max77804k-muic max77804k-muic: state: cur=0x0, new=0x40, changed=0x40
<6>[    6.904728] extcon extcon-muic: extcon_set_cable_state: Charge-downstream is attached
<6>[    6.904734] extcon extcon-muic: index = 6
<6>[    6.904738] extcon extcon-muic: state: 0x0, 0x40, mask: 0x40
<6>[    6.904743] extcon extcon-muic: state: 0x0 --> 0x40
<6>[    6.904749] extcon extcon-muic: _call_per_cable: Charge-downstream is attached, calling 0xc05888a4
<6>[    6.904757] extcon extcon-muic: _call_per_cable: Charge-downstream is attached, calling 0xc0771d54
<6>[    6.904764] sec-battery battery.98: batt_handle_notification: current_cable(6), wc_status(0), wire_status(6)
<6>[    6.904776] batt_handle_notification: CMD=ATTACH, attached_dev=6
<6>[    6.904784] sec_bat_check_cable_result_callback set ldo on
<4>[    6.904817] max77826_ldo6: Failed to create debugfs directory
<6>[    6.904825] max77804k-muic max77804k-muic: set_muic_path: current state=0x40, path=OPEN
<6>[    6.904830] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    6.904835] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[    6.905409] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[    6.905413] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[    6.905418] sec otg: Charge-downstream is attached
<6>[    6.906023] sec_usb_work klte_usb_rdrv_pin = 312, enable=1
<6>[    6.906032] usb: dwc3 power supply set(1)
<6>[    6.906038] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(1)
<6>[    6.906045] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
<6>[    6.908777] max77804k_set_charge_current: reg_data(0x99), charge(1000)
<6>[    6.964042] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.023535] msm-dwc3 msm_dwc3: dwc3_resume_work
<6>[    7.023544] msm-dwc3 msm_dwc3: dwc3_resume_work: already running
<6>[    7.024055] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.084033] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.144033] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.193535] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[    7.193567] msm_thermal:msm_therm_temp_log (0 --- 41)(1 --- 38)(2 --- 36)(3 --- 37)(4 --- 38)(5 --- 43)(6 --- 41)(7 --- 39)(8 --- 39)(9 --- 37)(10 --- 35)
<6>[    7.204034] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.264023] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.324055] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.384027] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.444035] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.504044] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.564035] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.624042] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<4>[    7.674913] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
<6>[    7.674989] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
<6>[    7.684035] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.744040] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.781296] android_work: android_work: did not send uevent (0 0   (null))
<6>[    7.804036] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.864037] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.924040] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    7.984047] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    8.044040] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    8.104044] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    8.164034] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[    8.164040] max77804k_set_input_current: reg_data(0x28), input(1000)
<6>[    8.165866] max77804k_set_topoff_current: reg_data(0x24), topoff(200)
<6>[    8.166284] sec-battery battery.98: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[    8.166290] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[    8.172242] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[    8.172773] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[    8.174611] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    8.196441] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(233), Temp-ADC(34425)
<6>[    8.197359] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[    8.198267] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[    8.198273] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[    8.198280] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(233),is_hc_usb(0)
<6>[    8.220101] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[    8.221153] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[    8.222727] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[    8.222734] sec-battery battery.98: sec_bat_time_management: Charging Time : 2 secs
<6>[    8.222741] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[    8.223268] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[    8.223273] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[    8.223279] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   10.430035] SELinux:  Context u:object_r:themeservice_app_data_file:s0 is not valid (left unmapped).
<6>[   10.462933] SELinux:  Context u:object_r:mpctl_data_file:s0 is not valid (left unmapped).
<6>[   10.463898] SELinux:  Context u:object_r:cnd_data_file:s0 is not valid (left unmapped).
<6>[   10.465393] SELinux:  Context u:object_r:time_data_file:s0 is not valid (left unmapped).
<6>[   10.468273] SELinux:  Context u:object_r:vcs_data_file:s0 is not valid (left unmapped).
<6>[   10.469478] SELinux:  Context u:object_r:camera_socket:s0 is not valid (left unmapped).
<6>[   10.471518] SELinux:  Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
<6>[   10.471850] SELinux:  Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
<6>[   10.473051] SELinux:  Context u:object_r:ringtone_file:s0 is not valid (left unmapped).
<6>[   10.479337] SELinux:  Context u:object_r:shortcut_manager_icons:s0 is not valid (left unmapped).
<6>[   10.697548] SELinux:  Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
<6>[   10.710125] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
<7>[   10.710141] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
<6>[   10.713811] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   10.715947] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   10.716007] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   10.716012] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   10.723590] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   10.724292] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   10.724349] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   10.724353] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<3>[   10.743323] init: Warning!  Service qseecomd needs a SELinux domain defined; please fix!
<5>[   10.743438] init: Starting service 'qseecomd'...
<6>[   10.759771] warning: `qseecomd' uses 32-bit capabilities (legacy support in use)
<6>[   11.626105] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   11.628039] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   11.628099] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   11.628104] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   11.633590] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   11.634296] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   11.634352] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   11.634357] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   11.634878] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[   11.638039] usb: enabled: 0, dev->enabled: 1
<6>[   11.638049] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
<3>[   11.638057] dwc3 f9200000.dwc3: request e9a79680 was not queued to ep0out
<7>[   11.638117] usb: usb_remove_config cdev->config=  (null), config=e8412d80
<6>[   11.638207] adb_release
<6>[   11.640337] usb: enabled: 0, dev->enabled: 0
<6>[   11.640343] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
<6>[   11.640551] usb: enabled: 1, dev->enabled: 0
<7>[   11.640557] usb: enable_store f_holder->f:adb
<7>[   11.640563] usb: enable_store vendor=4e8,product=685e,bcdDevice=232
<7>[   11.640567] ,Class=0,SubClass=0,Protocol=0
<7>[   11.640571] usb: enable_store next cmd : usb_add_config
<6>[   11.640575] adb_bind_config
<4>[   11.640653] dwc3 f9200000.dwc3: dwc3_gadget_restart: unsupported device speed
<6>[   11.640739] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
<6>[   11.643576] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   11.644122] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   11.645958] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   11.647704] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
<7>[   11.647719] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
<6>[   11.667909] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(234), Temp-ADC(34414)
<6>[   11.668851] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   11.669772] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   11.669779] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   11.669785] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(234),is_hc_usb(0)
<3>[   11.686946] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   11.691841] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   11.692906] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   11.694512] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[   11.694519] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   12.203517] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   12.203548] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 38)(2 --- 35)(3 --- 36)(4 --- 38)(5 --- 42)(6 --- 49)(7 --- 39)(8 --- 40)(9 --- 37)(10 --- 35)
<6>[   14.043526] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   14.240235] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 226, y = 1191, wx = 5, wy = 5 |[1]
<7>[   14.240564] tspdrv: Enable time = 80 msec
<6>[   14.240577] tspdrv: ENABLE
<7>[   14.240895] haptic power_on is finished.
<7>[   14.240903] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   14.277677] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   14.320931] haptic power_off is finished.
<7>[   14.320939] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   14.339022] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<3>[   14.365151] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   14.404807] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   14.667059] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   15.495795] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 72, y = 909, wx = 6, wy = 6 |[1]
<3>[   15.520377] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   15.572358] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[6], Ver[A355][0/14]
<3>[   15.585305] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   15.585918] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   15.588737] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   15.588838] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   15.588843] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   15.593596] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   15.594313] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   15.594416] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   15.594421] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<7>[   15.594630] tspdrv: Enable time = 80 msec
<6>[   15.594644] tspdrv: ENABLE
<7>[   15.594906] haptic power_on is finished.
<7>[   15.594914] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   15.619633] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   15.675001] haptic power_off is finished.
<7>[   15.675010] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   17.213515] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   17.213546] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 35)(3 --- 35)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 37)(8 --- 37)(9 --- 36)(10 --- 35)
<6>[   17.572419] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 297, y = 1678, wx = 5, wy = 4 |[1]
<7>[   17.572717] tspdrv: Enable time = 80 msec
<6>[   17.572729] tspdrv: ENABLE
<7>[   17.573034] haptic power_on is finished.
<7>[   17.573041] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   17.595012] samsung_dsi_panel_event_handler : unknown event (9)
<7>[   17.653106] haptic power_off is finished.
<7>[   17.653115] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   17.660171] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[7], Ver[A355][0/14]
<3>[   17.661934] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   17.765250] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   17.866178] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   18.883161] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 106, y = 763, wx = 6, wy = 6 |[1]
<6>[   18.992807] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[9], Ver[A355][0/14]
<3>[   19.012944] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   19.016554] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   19.019335] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   19.019437] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   19.019442] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[   19.023588] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[   19.024288] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[   19.024388] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[   19.024393] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<7>[   19.024598] tspdrv: Enable time = 80 msec
<6>[   19.024610] tspdrv: ENABLE
<7>[   19.024872] haptic power_on is finished.
<7>[   19.024880] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<7>[   19.104983] haptic power_off is finished.
<7>[   19.104992] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[   19.124069] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   20.777395] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 819, y = 1160, wx = 6, wy = 6 |[1]
<7>[   20.777695] tspdrv: Enable time = 80 msec
<6>[   20.777708] tspdrv: ENABLE
<7>[   20.778018] haptic power_on is finished.
<7>[   20.778026] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<6>[   20.843094] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[5], Ver[A355][0/14]
<7>[   20.858081] haptic power_off is finished.
<7>[   20.858090] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[   20.877275] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   20.901511] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   20.937626] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   22.223518] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   22.223549] msm_thermal:msm_therm_temp_log (0 --- 38)(1 --- 37)(2 --- 35)(3 --- 35)(4 --- 37)(5 --- 38)(6 --- 38)(7 --- 37)(8 --- 37)(9 --- 36)(10 --- 34)
<6>[   23.029882] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 555, y = 1870, wx = 6, wy = 6 |[1]
<7>[   23.030393] tspdrv: Enable time = 80 msec
<6>[   23.030406] tspdrv: ENABLE
<7>[   23.030711] haptic power_on is finished.
<7>[   23.030719] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[   23.083661] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   23.106621] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[6], Ver[A355][0/14]
<6>[   23.110816] max77804k_get_input_current: CHG_CNFG_09(0x28)
<7>[   23.111022] haptic power_off is finished.
<7>[   23.111032] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[   23.111369] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   23.113297] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   23.135255] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(235), Temp-ADC(34397)
<6>[   23.136198] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   23.137129] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   23.137136] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   23.137143] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(235),is_hc_usb(0)
<6>[   23.159069] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   23.160192] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   23.161872] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   23.161883] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<3>[   23.162626] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   25.043544] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   27.233662] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   27.233693] msm_thermal:msm_therm_temp_log (0 --- 37)(1 --- 35)(2 --- 34)(3 --- 34)(4 --- 35)(5 --- 37)(6 --- 37)(7 --- 36)(8 --- 36)(9 --- 35)(10 --- 34)
<3>[   29.669153] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   32.243496] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   32.243527] msm_thermal:msm_therm_temp_log (0 --- 36)(1 --- 35)(2 --- 34)(3 --- 34)(4 --- 35)(5 --- 36)(6 --- 36)(7 --- 36)(8 --- 36)(9 --- 35)(10 --- 33)
<6>[   34.578091] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   34.578619] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   34.580433] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   34.602266] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(235), Temp-ADC(34384)
<6>[   34.603181] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   34.604106] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   34.604112] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   34.604119] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(235),is_hc_usb(0)
<6>[   34.625929] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   34.626975] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   34.628542] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[   34.628549] sec-battery battery.98: sec_bat_time_management: Charging Time : 82241613 secs
<6>[   34.628554] sec-battery battery.98: sec_bat_time_management: Charging Timer Expired
<6>[   34.630002] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(None), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   36.043607] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   37.253494] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   37.253524] msm_thermal:msm_therm_temp_log (0 --- 36)(1 --- 35)(2 --- 34)(3 --- 34)(4 --- 34)(5 --- 36)(6 --- 36)(7 --- 35)(8 --- 35)(9 --- 35)(10 --- 33)
<3>[   42.218372] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   42.263505] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   42.263536] msm_thermal:msm_therm_temp_log (0 --- 36)(1 --- 35)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 40)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[   47.043619] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   47.273628] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   47.273658] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 35)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 36)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[   52.283515] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   52.283545] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[   57.293655] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   57.293684] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   58.043445] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   62.303507] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   62.303536] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   66.046188] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   66.046715] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   66.048528] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   66.070347] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(236), Temp-ADC(34359)
<6>[   66.071262] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   66.072171] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   66.072176] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   66.072183] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4358mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(236),is_hc_usb(0)
<6>[   66.093995] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   66.094004] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[   66.094011] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(None), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   67.313587] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   67.313617] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   69.043536] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   72.323517] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   72.323546] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<3>[   72.789602] samsung_dsi_panel_event_handler : unknown event (9)
<3>[   75.326425] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   77.333508] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   77.333540] msm_thermal:msm_therm_temp_log (0 --- 36)(1 --- 35)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 36)(6 --- 36)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[   80.043413] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   82.343586] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   82.343615] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   82.838450] mdss_fb_set_backlight: [BL2] bkl_lvl (5), bl_updated(1)
<6>[   82.838462] [LCD]make_brightcontrol_set:bright_level: 5, candela_idx: 3( 6 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   82.842672] mipi_samsung_disp_send_cmd done..
<6>[   84.845163] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[   84.845172] [LCD]make_brightcontrol_set:bright_level: 0, candela_idx: 0( 2 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   84.849138] mipi_samsung_disp_send_cmd done..
<6>[   84.849200] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[   84.849205] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[   84.951564] mdss_dsi_panel_off : ++
<6>[   84.951568] mdss_dsi_panel_off: ctrl=e9ee8810 ndx=0
<6>[   84.951570] DISPLAY_OFF
<6>[   85.085426] mipi_samsung_disp_send_cmd done..
<6>[   85.085429] mdss_dsi_panel_off : --
<6>[   85.085435] mdss_dsi_off+: ctrl=e9ee8810 ndx=0
<6>[   85.087177] mdss_dsi_panel_power_on: enable=0 vregn(3)
<6>[   85.087180] mdss_dsi_panel_reset: enable(0) ndx(0)
<6>[   85.087197] mdss_dsi_extra_power: ++ enable(0) ndx(0)
<6>[   85.092231] mdss_dsi_extra_power lvs4(VDD3) diable
<6>[   85.100526] mdss_dsi_off-:
<3>[   85.101361] samsung_dsi_panel_event_handler : unknown event (7)
<6>[   85.101401] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[   86.052668] max77804k_irq_thread: interrupt source(0x01)
<6>[   86.053189] max77804k_irq_thread: charger interrupt(0x40)
<6>[   86.109619] max77804k_irq_thread: interrupt source(0x08)
<6>[   86.110359] max77804k_irq_thread: muic interrupt(0x00, 0x13, 0x00)
<6>[   86.110369] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:324
<6>[   86.110893] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[   86.111526] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:324 ret:0
<6>[   86.111531] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x0
<6>[   86.111538] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x0, vbvolt:0 adc open prev:1
<6>[   86.111543] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: DETACHED
<6>[   86.113375] max77804k-muic max77804k-muic: max77804k_muic_handle_detach: CNTL2(0x33)
<6>[   86.113381] max77804k-muic max77804k-muic: state: cur=0x40, new=0x0, changed=0x40
<6>[   86.113387] extcon extcon-muic: extcon_set_cable_state: Charge-downstream is detached
<6>[   86.113393] extcon extcon-muic: index = 6
<6>[   86.113397] extcon extcon-muic: state: 0x40, 0x0, mask: 0x40
<6>[   86.113402] extcon extcon-muic: state: 0x40 --> 0x0
<6>[   86.113408] extcon extcon-muic: _call_per_cable: Charge-downstream is detached, calling 0xc05888a4
<6>[   86.113419] extcon extcon-muic: _call_per_cable: Charge-downstream is detached, calling 0xc0771d54
<6>[   86.113426] sec-battery battery.98: batt_handle_notification: current_cable(1), wc_status(0), wire_status(1)
<6>[   86.113437] batt_handle_notification: CMD=DETACH, attached_dev=6
<6>[   86.113445] sec_bat_check_cable_result_callback set ldo off
<4>[   86.113464] max77826_ldo6: Failed to create debugfs directory
<6>[   86.113470] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[   86.113485] max77804k-muic max77804k-muic: set_muic_path: current state=0x0, path=OPEN
<6>[   86.113490] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   86.115687] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   86.115695] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 998 is used for capacity_max
<6>[   86.116479] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:328
<6>[   86.116682] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   86.116688] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   86.117051] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:0
<6>[   86.118195] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:328 ret:0
<6>[   86.118200] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x0
<6>[   86.118207] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x0, vbvolt:0 adc open prev:1
<6>[   86.118212] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: DETACHED
<6>[   86.119512] sec otg: Charge-downstream is detached
<6>[   86.120123] sec_usb_work klte_usb_rdrv_pin = 312, enable=0
<6>[   86.120129] usb: dwc3 power supply set(0)
<6>[   86.120134] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(0)
<6>[   86.120141] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
<6>[   86.120491] max77804k_set_charge_current: reg_data(0x80), charge(0)
<6>[   86.125141] max77804k_set_input_current: reg_data(0x12), input(460)
<6>[   86.125665] max77804k-muic max77804k-muic: max77804k_muic_handle_detach: CNTL2(0x33)
<6>[   86.125670] max77804k-muic max77804k-muic: state: cur=0x0, new=0x0, changed=0x0
<6>[   86.125676] max77804k-muic max77804k-muic: set_muic_path: current state=0x0, path=OPEN
<6>[   86.125681] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   86.127497] max77804k_set_topoff_current: reg_data(0x00), topoff(0)
<6>[   86.127902] sec-battery battery.98: sec_bat_cable_work: Status:Discharging, Sleep:No, Charging:No, Short Poll:No
<6>[   86.127908] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[   86.204286] usb:: dwc3_gadget_disconnect_interrupt
<7>[   86.204296] usb: composite_disconnect
<6>[   86.204318] android_work: android_work: did not send uevent (0 0   (null))
<6>[   86.233670] msm-dwc3 msm_dwc3: dwc3_resume_work
<6>[   86.233674] msm-dwc3 msm_dwc3: dwc3_resume_work: already running
<6>[   86.233686] dwc3 f9200000.dwc3: gadget android_usb data soft-disconnect
<6>[   86.233690] usb:: dwc3_gadget_disconnect_interrupt
<7>[   86.233697] usb: composite_disconnect
<6>[   86.233708] android_work: android_work: did not send uevent (0 0   (null))
<6>[   86.238690] msm-dwc3 msm_dwc3: DWC3 in low power mode
<6>[   86.629732] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   86.630272] max77804k_get_input_current: CHG_CNFG_09(0x12)
<6>[   86.632115] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   86.653957] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(237), Temp-ADC(34346)
<6>[   86.654888] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   86.655814] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   86.655819] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   86.655826] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4311mV),Inow(450mA),Imax(1000mA),SOC(100%),Tbat(237),is_hc_usb(0)
<6>[   86.655833] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   86.655840] sec-battery battery.98: sec_bat_monitor_work: Status(Discharging), Mode(None), Health(Good), Cable(1), Vendor(SDI SDI), level(100%)
<6>[   87.265101] max77804k_chgin_isr_work: irq(319), chgin(0x0), chg_dtls(0x8) prev 0x0
<6>[   87.353514] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   87.353544] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 33)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   87.768356] max77804k_irq_thread: interrupt source(0x01)
<6>[   87.768891] max77804k_irq_thread: charger interrupt(0x40)
<6>[   87.793999] max77804k_irq_thread: interrupt source(0x08)
<6>[   87.794761] max77804k_irq_thread: muic interrupt(0x00, 0x12, 0x00)
<6>[   87.797193] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:328
<6>[   87.797732] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:3f
<6>[   87.798382] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:328 ret:0
<6>[   87.798387] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x48
<6>[   87.798394] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x0, vbvolt:64 adc open prev:1
<6>[   87.798399] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: DETACHED
<6>[   87.800280] max77804k-muic max77804k-muic: max77804k_muic_handle_detach: CNTL2(0x33)
<6>[   87.800285] max77804k-muic max77804k-muic: state: cur=0x0, new=0x0, changed=0x0
<6>[   87.800290] max77804k-muic max77804k-muic: set_muic_path: current state=0x0, path=OPEN
<6>[   87.800295] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   87.972086] max77804k_irq_thread: interrupt source(0x08)
<6>[   87.972846] max77804k_irq_thread: muic interrupt(0x00, 0x03, 0x00)
<6>[   87.972854] max77804k-muic max77804k-muic: max77804k_muic_irq: irq:324
<6>[   87.973392] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev CONTROL1:9
<6>[   87.974068] max77804k-muic max77804k-muic: func:max77804k_muic_detect_dev irq:324 ret:0
<6>[   87.974073] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: STATUS1:0x3f, 2:0x42
<6>[   87.974080] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x2, vbvolt:64 adc open prev:1
<6>[   87.974085] max77804k-muic max77804k-muic: max77804k_muic_detect_dev: ATTACHED/CHANGED
<6>[   87.974089] max77804k-muic max77804k-muic: max77804k_muic_handle_attach:
<6>[   87.974094] max77804k-muic max77804k-muic: st1:0x3f st2:0x42
<6>[   87.974098] max77804k-muic max77804k-muic: adc:0x1f, adc1k:0x0, chgtyp:0x2, vbvolt:64
<6>[   87.974103] max77804k-muic max77804k-muic: chgdetrun:0x0, prev state:0x0
<6>[   87.974108] max77804k-muic max77804k-muic: state: cur=0x0, new=0x40, changed=0x40
<6>[   87.974113] extcon extcon-muic: extcon_set_cable_state: Charge-downstream is attached
<6>[   87.974118] extcon extcon-muic: index = 6
<6>[   87.974122] extcon extcon-muic: state: 0x0, 0x40, mask: 0x40
<6>[   87.974127] extcon extcon-muic: state: 0x0 --> 0x40
<6>[   87.974131] extcon extcon-muic: _call_per_cable: Charge-downstream is attached, calling 0xc05888a4
<6>[   87.974138] extcon extcon-muic: _call_per_cable: Charge-downstream is attached, calling 0xc0771d54
<6>[   87.974144] sec-battery battery.98: batt_handle_notification: current_cable(6), wc_status(0), wire_status(6)
<6>[   87.974154] batt_handle_notification: CMD=ATTACH, attached_dev=6
<6>[   87.974161] sec_bat_check_cable_result_callback set ldo on
<4>[   87.974173] max77826_ldo6: Failed to create debugfs directory
<6>[   87.974179] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[   87.974189] max77804k-muic max77804k-muic: set_muic_path: current state=0x40, path=OPEN
<6>[   87.974194] max77804k-muic max77804k-muic: set_muic_path: don't have to set path
<6>[   87.974792] max77826_get_op_register: id=5, reg=0x11, mask=0x8, pattern=0x8
<6>[   87.974807] max77804k-muic max77804k-muic: max77804k_muic_uart_uevent: state:0
<6>[   87.976547] sec otg: Charge-downstream is attached
<6>[   87.978536] sec_usb_work klte_usb_rdrv_pin = 312, enable=1
<6>[   87.978542] usb: dwc3 power supply set(1)
<6>[   87.978547] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: !mdwc->ext_inuse(1), mdwc->ext_xceiv.otg_capability(1), !init(0)
<6>[   87.978552] msm-dwc3 msm_dwc3: dwc3_msm_power_set_property_usb: queue_delayed_work mdwc->resume_work
<6>[   87.979104] max77804k_set_charge_current: reg_data(0x99), charge(1000)
<6>[   88.044046] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.093522] msm-dwc3 msm_dwc3: dwc3_resume_work
<6>[   88.093528] msm-dwc3 msm_dwc3: dwc3_resume_work: pm_runtime_get_sync entered
<6>[   88.099991] msm-dwc3 msm_dwc3: DWC3 exited from low power mode
<6>[   88.104018] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.164032] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.224030] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.284019] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.324977] dwc3 f9200000.dwc3: gadget android_usb data soft-connect
<6>[   88.344020] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.404030] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.464030] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.524030] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.537224] usb:: dwc3_gadget_reset_interrupt
<6>[   88.548237] usb:: dwc3_gadget_conndone_interrupt (HS)
<3>[   88.548250] usb: Super speed host not available
<6>[   88.548323] android_work: android_work: did not send uevent (0 0   (null))
<7>[   88.575137] usb: GET_DES
<6>[   88.575211] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[   88.578847] usb:: dwc3_gadget_reset_interrupt
<7>[   88.578855] usb: composite_disconnect
<6>[   88.578898] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   88.584041] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.586356] usb:: dwc3_gadget_conndone_interrupt (HS)
<6>[   88.645588] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<7>[   88.658217] usb: GET_DES
<6>[   88.658293] android_work: android_work: sent uevent USB_STATE=CONNECTED
<7>[   88.658694] usb: set_config_number single config num=0
<7>[   88.658700] usb: set_interface_count next_interface_id=1
<6>[   88.664361] synaptics_rmi4_i2c 2-0020: Spontaneous reset detected
<6>[   88.664367] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_free_fingers
<6>[   88.664442] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[   88.664446] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<3>[   88.664454] samsung_dsi_panel_event_handler : unknown event (8)
<6>[   88.664530] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
<6>[   88.666785] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_reinit_device: Hsync [NG[0x24]]
<6>[   88.668049] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_reinit_device: Interrupt enable mask 0 = 0x64
<3>[   88.668182] samsung_dsi_panel_event_handler : unknown event (1)
<6>[   88.668197] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
<6>[   88.668201] thrd_start =4 thrd_cont=4
<6>[   88.669247] mdss_dsi_on+: ctrl=e9ee8810 ndx=0
<6>[   88.669251] mdss_dsi_on: success [disp_te_gpio] gpio_ltmm_config..
<6>[   88.669254] mdss_dsi_panel_power_on: enable=1 vregn(3)
<6>[   88.671499] mdss_dsi_extra_power: ++ enable(1) ndx(0)
<6>[   88.671502] mdss_dsi_extra_power: lvs4(VDD3) enable.
<6>[   88.686384] mdss_dsi_host_init: Broadcast mode (0).
<6>[   88.704034] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.713506] mdss_dsi_panel_reset: enable(1) ndx(0)
<6>[   88.730629] mdss_dsi_on-:
<6>[   88.730637] mdss_dsi_panel_on : ++
<6>[   88.730640] mdss_dsi_panel_on: ctrl=e9ee8810 ndx=0
<6>[   88.759871] mipi_samsung_disp_send_cmd done..
<6>[   88.764017] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.824028] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.864586] mipi_samsung_disp_send_cmd done..
<6>[   88.868493] mipi_samsung_disp_send_cmd done..
<6>[   88.868502] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   88.868507] mipi_samsung_disp_send_cmd : panel is off state!!
<6>[   88.868510] [LCD]mipi_samsung_disp_send_cmd:Undefined command
<6>[   88.868516] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   88.872420] mipi_samsung_disp_send_cmd done..
<3>[   88.872424] [mdnie lite] is negative Mode On = 0
<3>[   88.876220] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), AUTO(4), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[   88.876224] mdss_dsi_panel_on : --
<6>[   88.884017] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<7>[   88.902002] usb: GET_DES
<7>[   88.902379] usb: set_config_number single config num=0
<7>[   88.902383] usb: set_interface_count next_interface_id=1
<7>[   88.902517] usb: set_config_number single config num=0
<7>[   88.902521] usb: set_interface_count next_interface_id=1
<6>[   88.902685] android_usb gadget: high-speed config #1: fe8050c8.android_usb
<7>[   88.902718] usb: SET_CON
<7>[   88.902721] usb: set_config_number single config num=0
<6>[   88.903281] mipi_samsung_disp_send_cmd done..
<6>[   88.903357] mipi_samsung_disp_send_cmd done..
<6>[   88.903671] read_reg : A[1] : 9c .
<6>[   88.903750] mipi_samsung_disp_send_cmd done..
<6>[   88.903753] DISPLAY_ON
<6>[   88.903758] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[   88.903762] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[   88.903767] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[   88.904207] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[   88.904217] [LCD]make_brightcontrol_set:bright_level: 162, candela_idx: 51( 220 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[   88.904727] mipi_samsung_disp_send_cmd done..
<6>[   88.944069] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   88.953565] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[   88.975190] max77804k_chgin_isr_work: irq(319), chgin(0x3), chg_dtls(0x2) prev 0x3
<3>[   88.985850] samsung_dsi_panel_event_handler : unknown event (9)
<6>[   89.004045] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   89.064042] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   89.124028] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   89.184018] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   89.244028] max77804k_get_byp_dtls: BYP_DTLS : 0x 0
<6>[   89.244033] max77804k_set_input_current: reg_data(0x28), input(1000)
<6>[   89.245858] max77804k_set_topoff_current: reg_data(0x24), topoff(200)
<6>[   89.246262] sec-battery battery.98: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
<6>[   89.246268] sec-battery battery.98: sec_bat_cable_work: Polling time is reset to 30 sec.
<6>[   89.749445] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   89.749969] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   89.751785] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   89.773608] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(238), Temp-ADC(34331)
<6>[   89.774523] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[   89.775433] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[   89.775439] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[   89.775445] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(238),is_hc_usb(0)
<6>[   89.797256] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[   89.798298] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[   89.799858] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x2
<6>[   89.799865] sec-battery battery.98: sec_bat_time_management: Charging Time : 2 secs
<6>[   89.799872] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[   89.800396] max77804k_get_charger_state: CHG_DTLS : 0x 2
<6>[   89.800401] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Normal
<6>[   89.800407] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[   91.043536] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[   92.363524] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   92.363555] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   97.373654] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[   97.373686] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[   99.979771] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   99.980297] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[   99.982112] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  100.003937] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(238), Temp-ADC(34319)
<6>[  100.004852] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  100.005763] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  100.005769] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[  100.005775] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(238),is_hc_usb(0)
<6>[  100.027586] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  100.028628] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  100.030188] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  100.030196] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  102.043536] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  102.383532] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  102.383561] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[  107.393712] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  107.393742] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 32)
<6>[  111.446802] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  111.447327] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  111.449138] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  111.470963] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(239), Temp-ADC(34306)
<6>[  111.471878] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  111.472787] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  111.472793] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[  111.472799] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(239),is_hc_usb(0)
<6>[  111.494609] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  111.495648] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  111.497205] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  111.497211] sec-battery battery.98: sec_bat_monitor_work: Status(Charging), Mode(Normal), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  112.403547] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  112.403577] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  113.043498] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  117.413488] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  117.413517] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  121.979655] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  121.980180] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  121.981991] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  122.003806] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(239), Temp-ADC(34295)
<6>[  122.004720] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  122.005630] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  122.005635] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[  122.005641] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(239),is_hc_usb(0)
<6>[  122.027450] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  122.028496] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  122.030053] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  122.030060] sec-battery battery.98: sec_bat_time_management: Charging Time : 34 secs
<6>[  122.030067] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[  122.030591] max77804k_get_charger_state: CHG_DTLS : 0x 3
<6>[  122.030596] sec-battery battery.98: sec_bat_check_fullcharged: Full Check Charger (1)
<6>[  122.032937] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  122.032943] sec-fuelgauge 19-0036: sec_fg_calculate_dynamic_scale: 998 is used for capacity_max
<6>[  122.032950] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Additional
<6>[  122.032956] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  122.423541] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  122.423571] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  124.043566] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  127.433630] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  127.433659] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  132.049268] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  132.049793] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  132.051604] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  132.073418] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(240), Temp-ADC(34285)
<6>[  132.074333] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  132.075243] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10095), data(0x0000)
<6>[  132.075248] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.0)
<6>[  132.075254] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(240),is_hc_usb(0)
<6>[  132.097063] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  132.098103] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  132.099660] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  132.099666] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  132.443507] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  132.443537] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 34)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 35)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  135.043679] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<3>[  135.115665] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  137.453511] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  137.453543] msm_thermal:msm_therm_temp_log (0 --- 36)(1 --- 35)(2 --- 33)(3 --- 34)(4 --- 35)(5 --- 36)(6 --- 36)(7 --- 35)(8 --- 36)(9 --- 35)(10 --- 33)
<6>[  142.463483] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  142.463512] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 35)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 36)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 35)(10 --- 33)
<6>[  143.516360] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  143.516886] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  143.518701] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[  143.540521] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(240), Temp-ADC(34270)
<6>[  143.541437] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  143.542348] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[  143.542354] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.1)
<6>[  143.542360] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4393mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(240),is_hc_usb(0)
<6>[  143.564172] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  143.565212] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  143.566773] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  143.566780] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  146.043589] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  147.473677] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  147.473706] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 35)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 36)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  148.635024] mdss_fb_set_backlight: [BL2] bkl_lvl (5), bl_updated(1)
<6>[  148.635037] [LCD]make_brightcontrol_set:bright_level: 5, candela_idx: 3( 6 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[  148.638812] mipi_samsung_disp_send_cmd done..
<6>[  150.641285] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[  150.641293] [LCD]make_brightcontrol_set:bright_level: 0, candela_idx: 0( 2 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[  150.645280] mipi_samsung_disp_send_cmd done..
<6>[  150.645344] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK ++
<6>[  150.645349] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[  150.737388] mdss_dsi_panel_off : ++
<6>[  150.737391] mdss_dsi_panel_off: ctrl=e9ee8810 ndx=0
<6>[  150.737393] DISPLAY_OFF
<6>[  150.871007] mipi_samsung_disp_send_cmd done..
<6>[  150.871010] mdss_dsi_panel_off : --
<6>[  150.871015] mdss_dsi_off+: ctrl=e9ee8810 ndx=0
<6>[  150.872759] mdss_dsi_panel_power_on: enable=0 vregn(3)
<6>[  150.872763] mdss_dsi_panel_reset: enable(0) ndx(0)
<6>[  150.872779] mdss_dsi_extra_power: ++ enable(0) ndx(0)
<6>[  150.877815] mdss_dsi_extra_power lvs4(VDD3) diable
<6>[  150.886107] mdss_dsi_off-:
<3>[  150.886941] samsung_dsi_panel_event_handler : unknown event (7)
<6>[  150.886981] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_BLANK --
<6>[  152.483651] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  152.483680] msm_thermal:msm_therm_temp_log (0 --- 35)(1 --- 35)(2 --- 33)(3 --- 34)(4 --- 34)(5 --- 36)(6 --- 35)(7 --- 35)(8 --- 35)(9 --- 34)(10 --- 33)
<6>[  153.238158] synaptics_rmi4_i2c 2-0020: Spontaneous reset detected
<6>[  153.238163] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_free_fingers
<6>[  153.238315] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_f12_set_feature: 0x0
<6>[  153.238712] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_reinit_device: Hsync [NG[0x24]]
<6>[  153.238838] synaptics_rmi4_i2c 2-0020: synaptics_rmi4_reinit_device: Interrupt enable mask 0 = 0x64
<6>[  153.979772] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  153.980298] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  153.982109] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[  154.003923] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(241), Temp-ADC(34261)
<6>[  154.004837] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  154.005747] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[  154.005752] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.1)
<6>[  154.005758] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4391mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(241),is_hc_usb(0)
<6>[  154.027560] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  154.028599] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  154.030158] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  154.030165] sec-battery battery.98: sec_bat_time_management: Charging Time : 66 secs
<6>[  154.030171] sec-battery battery.98: sec_bat_temperature: HLT(800) HLR(750) HT(560), HR(460), LT(-50), LR(0)
<6>[  154.030177] sec-battery battery.98: sec_bat_fullcharged_check: Charging Mode : Additional
<6>[  154.030183] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<6>[  156.233566] gpio_keys_gpio_report_event: home_key key is pressed
<3>[  156.233572] sec_debug_check_crash_key code 172 value 1 state 0 enable 0
<6>[  156.233797] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK ++
<6>[  156.233820] mdss_mdp_overlay_on: mdss_mdp_overlay_on: ++
<3>[  156.233828] samsung_dsi_panel_event_handler : unknown event (8)
<3>[  156.237363] samsung_dsi_panel_event_handler : unknown event (1)
<6>[  156.237371] mdss_mdp_cmd_tearcheck_cfg: te->tear_check_en = 1, res=1920 vclks=a5 height=65520 init=1920 rd=1921 start=1920
<6>[  156.237375] thrd_start =4 thrd_cont=4
<6>[  156.238596] mdss_dsi_on+: ctrl=e9ee8810 ndx=0
<6>[  156.238599] mdss_dsi_on: success [disp_te_gpio] gpio_ltmm_config..
<6>[  156.238603] mdss_dsi_panel_power_on: enable=1 vregn(3)
<6>[  156.240808] mdss_dsi_extra_power: ++ enable(1) ndx(0)
<6>[  156.240811] mdss_dsi_extra_power: lvs4(VDD3) enable.
<6>[  156.255687] mdss_dsi_host_init: Broadcast mode (0).
<6>[  156.283527] mdss_dsi_panel_reset: enable(1) ndx(0)
<6>[  156.300649] mdss_dsi_on-:
<6>[  156.300656] mdss_dsi_panel_on : ++
<6>[  156.300659] mdss_dsi_panel_on: ctrl=e9ee8810 ndx=0
<6>[  156.329851] mipi_samsung_disp_send_cmd done..
<6>[  156.434081] mipi_samsung_disp_send_cmd done..
<6>[  156.437743] mipi_samsung_disp_send_cmd done..
<6>[  156.437752] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[  156.437757] mipi_samsung_disp_send_cmd : panel is off state!!
<6>[  156.437759] [LCD]mipi_samsung_disp_send_cmd:Undefined command
<6>[  156.437765] [LCD]make_brightcontrol_set:bright_level: 180, candela_idx: 52( 234 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[  156.441877] mipi_samsung_disp_send_cmd done..
<3>[  156.441881] [mdnie lite] is negative Mode On = 0
<3>[  156.445921] [mdnie lite] mDNIe_Set_Mode end , UI_MODE(0), AUTO(4), OUTDOOR_OFF_MODE(0), ACCESSIBILITY_OFF(0)
<6>[  156.445925] mdss_dsi_panel_on : --
<6>[  156.463527] gpio_keys_gpio_report_event: home_key key is released
<3>[  156.463531] sec_debug_check_crash_key code 172 value 0 state 0 enable 0
<6>[  156.473314] mipi_samsung_disp_send_cmd done..
<6>[  156.473394] mipi_samsung_disp_send_cmd done..
<6>[  156.473717] read_reg : A[1] : 9c .
<6>[  156.473795] mipi_samsung_disp_send_cmd done..
<6>[  156.473798] DISPLAY_ON
<6>[  156.473803] mdss_mdp_overlay_on: mdss_mdp_overlay_on: --
<6>[  156.473807] mdss_fb_set_backlight: [BL2] bkl_lvl (0), bl_updated(1)
<6>[  156.473811] mdss_fb_blank_sub: FB_NUM:0, MDSS_FB_UNBLANK --
<6>[  156.474306] mdss_fb_set_backlight: [BL2] bkl_lvl (162), bl_updated(1)
<6>[  156.474315] [LCD]make_brightcontrol_set:bright_level: 162, candela_idx: 51( 220 cd ), cmd_count(aid,acl,elvss,temperature,gamma)::(1,0,1,0,3)7,id3(0x13)
<6>[  156.474812] mipi_samsung_disp_send_cmd done..
<3>[  156.548418] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  157.043536] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<6>[  157.130822] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 195, y = 1675, wx = 7, wy = 6 |[1]
<3>[  157.237540] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  157.316011] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  157.390564] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  157.466595] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  157.493535] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  157.493569] msm_thermal:msm_therm_temp_log (0 --- 40)(1 --- 36)(2 --- 33)(3 --- 34)(4 --- 35)(5 --- 44)(6 --- 38)(7 --- 36)(8 --- 36)(9 --- 35)(10 --- 33)
<3>[  157.541963] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  157.559789] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[38], Ver[A355][0/14]
<3>[  157.616985] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  157.689529] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  158.187598] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 221, y = 1677, wx = 6, wy = 5 |[1]
<3>[  158.263990] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  158.374825] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  158.453780] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  158.528651] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  158.539498] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[31], Ver[A355][0/14]
<3>[  158.604243] samsung_dsi_panel_event_handler : unknown event (9)
<7>[  158.604628] tspdrv: Enable time = 80 msec
<6>[  158.604647] tspdrv: ENABLE
<7>[  158.604932] haptic power_on is finished.
<7>[  158.604939] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  158.637092] samsung_dsi_panel_event_handler : unknown event (9)
<7>[  158.685010] haptic power_off is finished.
<7>[  158.685018] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[  159.761741] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 263, y = 1219, wx = 7, wy = 7 |[1]
<7>[  159.762066] tspdrv: Enable time = 80 msec
<6>[  159.762084] tspdrv: ENABLE
<7>[  159.762363] haptic power_on is finished.
<7>[  159.762369] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  159.830458] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  159.838173] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[6], Ver[A355][0/14]
<7>[  159.842424] haptic power_off is finished.
<7>[  159.842433] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[  159.885961] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  159.923828] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  160.840287] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 133, y = 921, wx = 7, wy = 5 |[1]
<3>[  160.863385] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  160.960959] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[10], Ver[A355][0/14]
<6>[  160.961281] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  160.963830] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  160.963932] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  160.963937] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[  160.964112] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  160.966387] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  160.966488] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  160.966492] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<7>[  160.966706] tspdrv: Enable time = 80 msec
<6>[  160.966718] tspdrv: ENABLE
<7>[  160.967177] haptic power_on is finished.
<7>[  160.967185] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  160.996875] samsung_dsi_panel_event_handler : unknown event (9)
<7>[  161.047067] haptic power_off is finished.
<7>[  161.047075] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[  162.480495] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 326, y = 1664, wx = 7, wy = 6 |[1]
<3>[  162.500736] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  162.504080] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  162.504110] msm_thermal:msm_therm_temp_log (0 --- 37)(1 --- 36)(2 --- 35)(3 --- 35)(4 --- 36)(5 --- 38)(6 --- 42)(7 --- 37)(8 --- 37)(9 --- 36)(10 --- 34)
<7>[  162.504287] tspdrv: Enable time = 80 msec
<6>[  162.504301] tspdrv: ENABLE
<7>[  162.504565] haptic power_on is finished.
<7>[  162.504573] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  162.536829] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  162.557053] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[6], Ver[A355][0/14]
<7>[  162.584863] haptic power_off is finished.
<7>[  162.584871] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[  162.674513] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  162.774930] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  163.911148] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 94, y = 772, wx = 6, wy = 6 |[1]
<6>[  164.009885] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<6>[  164.039683] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  164.040251] max77804k_get_input_current: CHG_CNFG_09(0x28)
<6>[  164.042151] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<3>[  164.042617] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  164.046242] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  164.049033] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  164.049090] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  164.049095] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<6>[  164.049299] FAT-fs (mmcblk1p1[179:65]): trying to mount...
<3>[  164.051630] FAT-fs (mmcblk1p1[179:65]): bogus number of reserved sectors
<6>[  164.051685] FAT-fs (mmcblk1p1[179:65]): Can't find a valid FAT filesystem
<3>[  164.051690] FAT-fs (mmcblk1p1[179:65]): failed to mount!
<7>[  164.051932] tspdrv: Enable time = 80 msec
<6>[  164.051946] tspdrv: ENABLE
<7>[  164.052206] haptic power_on is finished.
<7>[  164.052214] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<6>[  164.072368] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(242), Temp-ADC(34236)
<6>[  164.073316] sec-battery battery.98: sec_bat_get_temperature_by_adc: Temp(300), Temp-ADC(33000)
<6>[  164.074268] sec-fuelgauge 19-0036: max17048_get_soc : raw capacity (10108), data(0x0000)
<6>[  164.074274] sec-fuelgauge 19-0036: sec_fg_get_scaled_capacity: scaled capacity (101.1)
<6>[  164.074281] sec-battery battery.98: sec_bat_get_battery_info:Vnow(4392mV),Inow(1000mA),Imax(1000mA),SOC(100%),Tbat(242),is_hc_usb(0)
<6>[  164.096203] sec-battery battery.98: sec_bat_battery_cable_check: Battery Connected
<6>[  164.097278] max77804k_get_health_state: bat_dtls(0x3) int_mask(0x9a)
<6>[  164.098879] max77804k_get_health_state: vbus_state : 0x3, chg_dtls : 0x3
<6>[  164.098887] sec-battery battery.98: sec_bat_monitor_work: Status(Full), Mode(Additional), Health(Good), Cable(6), Vendor(SDI SDI), level(100%)
<7>[  164.132341] haptic power_off is finished.
<7>[  164.132349] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<3>[  164.150880] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  164.912943] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 870, y = 1193, wx = 6, wy = 6 |[1]
<7>[  164.913104] tspdrv: Enable time = 80 msec
<6>[  164.913118] tspdrv: ENABLE
<7>[  164.913382] haptic power_on is finished.
<7>[  164.913389] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<7>[  164.993527] haptic power_off is finished.
<7>[  164.993536] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[  165.011530] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[8], Ver[A355][0/14]
<3>[  165.011880] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  165.036707] samsung_dsi_panel_event_handler : unknown event (9)
<3>[  165.072334] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  166.464643] synaptics_rmi4_i2c 2-0020: [0][P] 0x01, x = 563, y = 1848, wx = 5, wy = 6 |[1]
<7>[  166.465161] tspdrv: Enable time = 80 msec
<6>[  166.465184] tspdrv: ENABLE
<7>[  166.465474] haptic power_on is finished.
<7>[  166.465481] tspdrv: ImmVibeSPI_ForceOut_AmpEnable
<3>[  166.518445] samsung_dsi_panel_event_handler : unknown event (9)
<7>[  166.545551] haptic power_off is finished.
<7>[  166.545559] tspdrv: ImmVibeSPI_ForceOut_AmpDisable
<6>[  166.573986] synaptics_rmi4_i2c 2-0020: [0][R] 0x00 M[9], Ver[A355][0/14]
<3>[  166.629341] samsung_dsi_panel_event_handler : unknown event (9)
<6>[  167.513513] msm_thermal:msm_therm_temp_log Debug Temp for Sensor:
<6>[  167.513545] msm_thermal:msm_therm_temp_log (0 --- 39)(1 --- 37)(2 --- 35)(3 --- 36)(4 --- 37)(5 --- 39)(6 --- 39)(7 --- 38)(8 --- 38)(9 --- 37)(10 --- 35)
<6>[  168.043519] vfsspi_work_func_debug r ocpen: 0, ldo: 0, sleep: 0, tz: 1, type: raptor
<3>[  168.098967] samsung_dsi_panel_event_handler : unknown event (9)