Advertisement
Guest User

2.6.35.13 without SMP

a guest
Jun 4th, 2015
248
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.35.13-cavm1.whitney-econa (root@debian-compile) (gcc version 4.9.2 ( 4.9.2-10) ) #33 Sun May 31 23:37:16 CEST 2015
  4. [ 0.000000] Whitney release v1.1-beta5
  5. [ 0.000000] CPU: ARMv6-compatible processor [410fb024] revision 4 (ARMv7), cr=00c5387d
  6. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  7. [ 0.000000] Machine: Cavium Networks CNS3420 Validation Board
  8. [ 0.000000] Ignoring unrecognised tag 0x00000000
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  10. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  11. [ 0.000000] Kernel command line: root=/dev/sda1 mem=256M console=ttyS0,38400
  12. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  13. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  14. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  15. [ 0.000000] allocated 1310720 bytes of page_cgroup
  16. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  17. [ 0.000000] Memory: 256MB = 256MB total
  18. [ 0.000000] Memory: 249700k/249700k available, 12444k reserved, 0K highmem
  19. [ 0.000000] Virtual kernel memory layout:
  20. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  21. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  22. [ 0.000000] DMA : 0xfde00000 - 0xffe00000 ( 32 MB)
  23. [ 0.000000] vmalloc : 0xb0800000 - 0xe0000000 ( 760 MB)
  24. [ 0.000000] lowmem : 0xa0000000 - 0xb0000000 ( 256 MB)
  25. [ 0.000000] modules : 0x9f000000 - 0xa0000000 ( 16 MB)
  26. [ 0.000000] .init : 0xa0008000 - 0xa02b9000 (2756 kB)
  27. [ 0.000000] .text : 0xa02b9000 - 0xa081c000 (5516 kB)
  28. [ 0.000000] .data : 0xa083e000 - 0xa0874240 ( 217 kB)
  29. [ 0.000000] Hierarchical RCU implementation.
  30. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  31. [ 0.000000] Verbose stalled-CPUs detection is disabled.
  32. [ 0.000000] NR_IRQS:160
  33. [ 0.000000] Console: colour dummy device 80x30
  34. [ 0.000000] console [ttyS0] enabled
  35. [ 0.020000] Calibrating delay loop... 279.34 BogoMIPS (lpj=1396736)
  36. [ 0.260000] pid_max: default: 32768 minimum: 301
  37. [ 0.270000] Mount-cache hash table entries: 512
  38. [ 0.280000] Initializing cgroup subsys ns
  39. [ 0.290000] Initializing cgroup subsys cpuacct
  40. [ 0.300000] Initializing cgroup subsys memory
  41. [ 0.310000] Initializing cgroup subsys devices
  42. [ 0.320000] Initializing cgroup subsys freezer
  43. [ 0.330000] Initializing cgroup subsys net_cls
  44. [ 0.340000] Initializing cgroup subsys blkio
  45. [ 0.350000] CPU: Testing write buffer coherency:
  46. [ 0.360000] ok
  47. [ 0.360000] devtmpfs: initialized
  48. [ 0.370000] ------------[ cut here ]------------
  49. [ 0.380000] WARNING: at arch/arm/mm/dma-mapping.c:165 consistent_init+0x3c/0xc0()
  50. [ 0.390000] Modules linked in:
  51. [ 0.400000] [<a02bf43c>] (unwind_backtrace+0x0/0xdc) from [<a02d3e14>] (warn_slowpath_common+0x4c/0x64)
  52. [ 0.410000] [<a02d3e14>] (warn_slowpath_common+0x4c/0x64) from [<a02d3ebc>] (warn_slowpath_null+0x18/0x20)
  53. [ 0.420000] [<a02d3ebc>] (warn_slowpath_null+0x18/0x20) from [<a000c3d8>] (consistent_init+0x3c/0xc0)
  54. [ 0.430000] [<a000c3d8>] (consistent_init+0x3c/0xc0) from [<a02b9324>] (do_one_initcall+0x54/0x188)
  55. [ 0.440000] [<a02b9324>] (do_one_initcall+0x54/0x188) from [<a00089d0>] (kernel_init+0xb4/0x160)
  56. [ 0.450000] [<a00089d0>] (kernel_init+0xb4/0x160) from [<a02bac24>] (kernel_thread_exit+0x0/0x8)
  57. [ 0.460000] ---[ end trace 1b75b31a2719ed1c ]---
  58. [ 0.470000] NET: Registered protocol family 16
  59. [ 0.480000] L310 cache controller enabled
  60. [ 0.490000] l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x02540000, Cache size: 262144 B
  61. [ 0.500000] Initializing CNS3XXX DMA controller
  62. [ 0.510000] First time microcode alloc for channel 0 done @phy:2f055000
  63. [ 0.520000] First time microcode alloc for channel 1 done @phy:2f056000
  64. [ 0.530000] First time microcode alloc for channel 2 done @phy:2f057000
  65. [ 0.540000] First time microcode alloc for channel 3 done @phy:2f058000
  66. [ 0.550000] First time microcode alloc for channel 4 done @phy:2f059000
  67. [ 0.560000] First time microcode alloc for channel 5 done @phy:2f05a000
  68. [ 0.570000] First time microcode alloc for channel 6 done @phy:2f05b000
  69. [ 0.580000] First time microcode alloc for channel 7 done @phy:2f07a000
  70. [ 0.590000] First time microcode alloc for channel 8 done @phy:2f07b000
  71. [ 0.600000] cns_rdma_init: start
  72. [ 0.610000] cns_rdma_init: reg1: virt=0xaf015328
  73. [ 0.620000] cns_rdma_init: pre-allocating rdma_sg: 32*280=8960
  74. [ 0.630000] cns_rdma_init: q1: virt=0xaf012a00, phy=0x2f012a00 -> 0x2f012bf0
  75. [ 0.640000] cns_rdma_init: done, err=0
  76. [ 0.650000] Cavium feature enabled:
  77. [ 0.670000] bio: create slab <bio-0> at 0
  78. [ 0.690000] vgaarb: loaded
  79. [ 0.690000] SCSI subsystem initialized
  80. [ 0.700000] usbcore: registered new interface driver usbfs
  81. [ 0.710000] usbcore: registered new interface driver hub
  82. [ 0.720000] usbcore: registered new device driver usb
  83. [ 0.900000] raid6: int32x1 72 MB/s
  84. [ 1.080000] raid6: int32x2 90 MB/s
  85. [ 1.260000] raid6: int32x4 78 MB/s
  86. [ 1.440000] raid6: int32x8 69 MB/s
  87. [ 1.620000] raid6: CNS-RAID 402 MB/s
  88. [ 1.630000] raid6: using algorithm CNS-RAID (402 MB/s)
  89. [ 1.640000] Switching to clocksource timer1
  90. [ 1.650000] Slow work thread pool: Starting up
  91. [ 1.660000] Slow work thread pool: Ready
  92. [ 1.670000] FS-Cache: Loaded
  93. [ 1.690000] NET: Registered protocol family 2
  94. [ 1.700000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  95. [ 1.710000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  96. [ 1.720000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  97. [ 1.730000] TCP: Hash tables configured (established 8192 bind 8192)
  98. [ 1.740000] TCP reno registered
  99. [ 1.750000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  100. [ 1.760000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  101. [ 1.770000] NET: Registered protocol family 1
  102. [ 1.780000] RPC: Registered udp transport module.
  103. [ 1.790000] RPC: Registered tcp transport module.
  104. [ 1.800000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. [ 2.110000] CNS3XXX PCIe Host Control Driver
  106. [ 2.120000] ===============================
  107. [ 2.130000] CNS3XXX PCIe support both internal and external clock.
  108. [ 2.140000] However, incorrect selection may result in system hang.
  109. [ 2.150000] If booting hangs, please select choose
  110. [ 2.160000] CONFIG_CNS3XXX_INTERNAL_CLOCK_SOURCE
  111. [ 2.170000] instead.
  112. [ 2.170000] ===============================
  113. [ 2.180000] PCI-E0 uses external clock source.
  114. [ 2.190000] PCIe: Port[0] Enable PCIe LTSSM
  115. [ 2.200000] PCIe: Port[0] Check data link layer...
  116. [ 2.210000] Link up.
  117. [ 2.220000] PCIe: Set Bridge Max_Payload_Size to 128 byte
  118. [ 2.230000] PCIe: Set Bridge Max_Read_Request_Size to 128 byte
  119. [ 2.240000] PCIe: Set Device Max_Payload_Size to 128 byte
  120. [ 2.250000] PCIe: Set Device Max_Read_Request_Size to 128 byte
  121. [ 2.260000] PCI: bus0: Fast back to back transfers disabled
  122. [ 2.270000] PCI: bus1: Fast back to back transfers disabled
  123. [ 2.280000] PCIe0: Bridge found.
  124. [ 2.290000] PCI: enabling device 0000:00:00.0 (0140 -> 0143)
  125. [ 2.300000] PCIe0 map irq: 0000:00:00.00 slot 0, pin 1, irq: 87
  126. [ 2.310000] PCIe0 map irq: 0000:01:00.00 slot 0, pin 1, irq: 61
  127. [ 2.320000] pci 0000:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff]
  128. [ 2.330000] pci 0000:01:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bit]
  129. [ 2.340000] pci 0000:01:00.0: BAR 0: set to [mem 0xa0000000-0xa0007fff 64bit] (PCI address [0xa0000000-0xa0007fff]
  130. [ 2.350000] VFS: Disk quotas dquot_6.5.2
  131. [ 2.360000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  132. [ 2.370000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  133. [ 2.380000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  134. [ 2.390000] NTFS driver 2.1.29 [Flags: R/W].
  135. [ 2.400000] fuse init (API version 7.14)
  136. [ 2.410000] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
  137. [ 2.420000] SGI XFS Quota Management subsystem
  138. [ 2.430000] GFS2 (built May 31 2015 23:34:33) installed
  139. [ 2.440000] msgmni has been set to 487
  140. [ 2.450000] alg: No test for stdrng (krng)
  141. [ 2.460000] io scheduler noop registered
  142. [ 2.470000] io scheduler deadline registered (default)
  143. [ 2.490000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  144. [ 2.500000] serial8250: ttyS0 at MMIO 0x78000000 (irq = 45) is a 16550A
  145. [ 2.510000] brd: module loaded
  146. [ 2.530000] loop: module loaded
  147. [ 2.540000] drbd: initialized. Version: 8.3.8 (api:88/proto:86-94)
  148. [ 2.550000] drbd: built-in
  149. [ 2.550000] drbd: registered as block device major 147
  150. [ 2.560000] drbd: minor_table @ 0xaf6fd6a0
  151. [ 2.570000] Loading iSCSI transport class v2.0-870.
  152. [ 2.580000] iscsi: registered transport (tcp)
  153. [ 2.590000] cns3xxx_spi_probe: setup CNS3XXX SPI Controller in polling mode, w/o DMA
  154. [ 2.610000] SPI bit rate = 116/64 Mhz
  155. [ 2.620000] m25p80 spi1.0: found mx25l4005a, expected m25p80
  156. [ 2.630000] m25p80 spi1.0: mx25l4005a (512 Kbytes)
  157. [ 2.640000] Creating 3 MTD partitions on "spi1.0":
  158. [ 2.650000] 0x000000000000-0x000000030000 : "SPI-UBoot"
  159. [ 2.660000] 0x000000030000-0x000000040000 : "SPI-UBootEnv"
  160. [ 2.670000] 0x000000040000-0x000000080000 : "SPI-FileSystem"
  161. [ 2.680000] CNS3XXX AHCI SATA low-level driver
  162. [ 2.690000] SATA Port0 Spread-spectrum : Disable
  163. [ 2.700000] SATA Port0 Spread-spectrum : Enable
  164. [ 2.710000] SATA Port1 Spread-spectrum : Disable
  165. [ 2.720000] SATA Port1 Spread-spectrum : Enable
  166. [ 2.750000] cns3xxx-ahci cns3xxx-ahci.0: forcing PORTS_IMPL to 0x3
  167. [ 2.760000] CPU clock : 700
  168. [ 2.760000] *** Timer 1ms: 100000(0x186a0) ***
  169. [ 2.770000] *** Set to: 350000(0x55730) ***
  170. [ 2.780000] cns3xxx-ahci cns3xxx-ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  171. [ 2.790000] cns3xxx-ahci cns3xxx-ahci.0: flags: ncq sntf pm led clo only pmp pio slum part
  172. [ 2.800000] scsi0 : cns3xxx-ahci
  173. [ 2.810000] scsi1 : cns3xxx-ahci
  174. [ 2.820000] ata1: SATA max UDMA/133 ahci bar m16777216@0x83000000 port 0x83000100 irq 65
  175. [ 2.830000] ata2: SATA max UDMA/133 ahci bar m16777216@0x83000000 port 0x83000180 irq 65
  176. [ 2.850000] tun: Universal TUN/TAP device driver, 1.6
  177. [ 2.860000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  178. [ 2.880000] PCI: enabling device 0000:01:00.0 (0140 -> 0142)
  179. [ 2.890000] xhci_hcd 0000:01:00.0: xHCI Host Controller
  180. [ 2.900000] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  181. [ 2.970000] xhci_hcd 0000:01:00.0: irq 61, io mem 0xa0000000
  182. [ 2.980000] hub 1-0:1.0: USB hub found
  183. [ 2.990000] hub 1-0:1.0: 4 ports detected
  184. [ 3.000000] Initializing USB Mass Storage driver...
  185. [ 3.010000] usbcore: registered new interface driver usb-storage
  186. [ 3.020000] USB Mass Storage support registered.
  187. [ 3.030000] mice: PS/2 mouse device common for all mice
  188. [ 3.040000] CNS3XXX Real Time Clock, (c) 2009 Cavium Networks
  189. [ 3.050000] rtc irq:23
  190. [ 3.060000] cns3xxx-rtc cns3xxx-rtc: rtc core: registered cns3xxx-rtc as rtc0
  191. [ 3.070000] i2c /dev entries driver
  192. [ 3.090000] adt7475 0-002e: ADT7473 device, revision 0
  193. [ 3.100000] adt7475 0-002e: Optional features: fan4 pwm2
  194. [ 3.110000] CNS3XXX Watchdog Timer, noboot=0 margin=60 sec (nowayout= 0)
  195. [ 3.120000] watchdog: cns3xxx_wdt_probe
  196. [ 3.130000] watchdog irq = 30
  197. [ 3.140000] watchdog start_regs = 0xB082C600
  198. [ 3.210000] Watchdog timer frequency : 349.98MHz.
  199. [ 3.220000] ata1: SATA link down (SStatus 0 SControl 300)
  200. [ 3.230000] ata2: SATA link down (SStatus 0 SControl 300)
  201. [ 3.240000] md: linear personality registered for level -1
  202. [ 3.250000] md: raid0 personality registered for level 0
  203. [ 3.260000] md: raid1 personality registered for level 1
  204. [ 3.270000] xor: measuring software checksum speed
  205. [ 3.330000] arm4regs : 981.600 MB/sec
  206. [ 3.390000] 8regs : 453.200 MB/sec
  207. [ 3.450000] 32regs : 494.000 MB/sec
  208. [ 3.510000] CNS-RAID : 117.200 MB/sec
  209. [ 3.520000] xor: using function: CNS-RAID (117.200 MB/sec)
  210. [ 3.530000] md: raid6 personality registered for level 6
  211. [ 3.540000] md: raid5 personality registered for level 5
  212. [ 3.550000] md: raid4 personality registered for level 4
  213. [ 3.560000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  214. [ 3.570000] sdhci: Secure Digital Host Controller Interface driver
  215. [ 3.580000] sdhci: Copyright(c) Pierre Ossman
  216. [ 3.590000] sdhci-cns3xxx, (c) 2009 Cavium Networks
  217. [ 3.600000] mmc0: SDHCI controller on cns3xxx [sdhci-cns3xxx.0] using PIO
  218. [ 3.620000] n1_ssl_config_device: symbol_get failed
  219. [ 3.630000] Cavium device is not initialized1
  220. [ 3.640000] TCP cubic registered
  221. [ 3.650000] NET: Registered protocol family 17
  222. [ 3.660000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 4
  223. [ 3.680000] cns3xxx-rtc cns3xxx-rtc: setting system clock to 2015-06-01 00:12:00 UTC (1433117520)
  224. [ 3.720000] mmc0: new high speed SD card at address 0007
  225. [ 3.730000] mmcblk0: mmc0:0007 SD256 246 MiB
  226. [ 3.740000] mmcblk0:
  227. [ 3.750000] xhci_hcd 0000:01:00.0: Can't reset device (slot ID 1) in enabled/disabled state
  228. [ 3.760000] xhci_hcd 0000:01:00.0: Not freeing device rings.
  229. [ 3.770000] usb 1-3: new high speed USB device using xhci_hcd and address 0
  230. [ 3.780000] p1 p2 p3 p4
  231. [ 3.810000] scsi2 : usb-storage 1-3:1.0
  232. [ 4.820000] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
  233. [ 4.830000] sd 2:0:0:0: Attached scsi generic sg0 type 0
  234. [ 4.840000] sd 2:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
  235. [ 4.850000] sd 2:0:0:0: [sda] Write Protect is off
  236. [ 4.860000] sd 2:0:0:0: [sda] Assuming drive cache: write through
  237. [ 4.870000] sd 2:0:0:0: [sda] Assuming drive cache: write through
  238. [ 4.880000] sda:
  239. [ 4.890000] sda1
  240. [ 4.900000] sd 2:0:0:0: [sda] Assuming drive cache: write through
  241. [ 4.910000] sd 2:0:0:0: [sda] Attached SCSI removable disk
  242. [ 16.320000] Warning: unable to open an initial console.
  243. [ 16.390000] <30>udevd[498]: starting version 175
  244. udevd[498]: unable to receive ctrl connection: Function not implemented
Advertisement
RAW Paste Data Copied
Advertisement