ulfben

SMART report

Jul 17th, 2020
15
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@odroid:~# smartctl -a /dev/sda -d sat
  2. smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.141-169] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: ST12000NM0007-2A1101
  7. Serial Number: ZJV0CJ1V
  8. LU WWN Device Id: 5 000c50 0affaa667
  9. Firmware Version: SN02
  10. User Capacity: 12,000,138,625,024 bytes [12.0 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: Not in smartctl database [for details use: -P showall]
  15. ATA Version is: ACS-3 T13/2161-D revision 5
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Fri Jul 17 12:26:43 2020 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 567) seconds.
  33. Offline data collection
  34. capabilities: (0x7b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: (1086) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x70bd) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 081 064 044 Pre-fail Always - 137276223
  62. 3 Spin_Up_Time 0x0003 089 089 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 170
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000f 066 060 045 Pre-fail Always - 3608791
  66. 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1891
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 26
  69. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  70. 188 Command_Timeout 0x0032 100 094 000 Old_age Always - 8590065670
  71. 190 Airflow_Temperature_Cel 0x0022 066 049 040 Old_age Always - 34 (Min/Max 23/34)
  72. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8
  73. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 342
  74. 194 Temperature_Celsius 0x0022 034 046 000 Old_age Always - 34 (0 21 0 0 0)
  75. 195 Hardware_ECC_Recovered 0x001a 040 018 000 Old_age Always - 137276223
  76. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  77. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  78. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  79. 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 32 (37 99 0)
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6212554444
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 760812177
  83.  
  84. SMART Error Log Version: 1
  85. No Errors Logged
  86.  
  87. SMART Self-test log structure revision number 1
  88. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  89.  
  90. SMART Selective self-test log data structure revision number 1
  91. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  92. 1 0 0 Not_testing
  93. 2 0 0 Not_testing
  94. 3 0 0 Not_testing
  95. 4 0 0 Not_testing
  96. 5 0 0 Not_testing
  97. Selective self-test flags (0x0):
  98. After scanning selected spans, do NOT read-scan remainder of disk.
  99. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data