Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2013.07 (Mar 21 2019 - 14:43:46)
- Board: Openfang compatible board (Ingenic XBurst T20 SoC)
- DRAM: 64 MiB
- Top of RAM usable for U-Boot at: 84000000
- Reserving 641k for U-Boot at: 83f5c000
- Reserving 32784k for malloc() at: 81f58000
- Reserving 32 Bytes for Board Info at: 81f57fe0
- Reserving 124 Bytes for Global Data at: 81f57f64
- Reserving 128k for boot params() at: 81f37f64
- Stack Pointer at: 81f37f48
- Now running in RAM - U-Boot at: 83f5c000
- MMC: msc: 0
- the id code = 1c7018
- unsupport ID is if the id not be 0x00,the flash is ok for burner
- the manufacturer 1c
- SF: Detected FM25Q64
- In: serial
- Out: serial
- Err: serial
- Sets yellow LED off
- gpio_request lable = cmd_gpio gpio = 38
- gpio: pin 38 (gpio 38) value is 1
- Sets blue LED off
- gpio_request lable = cmd_gpio gpio = 39
- gpio: pin 39 (gpio 39) value is 1
- Enables USB
- gpio_request lable = cmd_gpio gpio = 47
- gpio: pin 47 (gpio 47) value is 1
- Enables SDCARD
- gpio_request lable = cmd_gpio gpio = 43
- gpio: pin 43 (gpio 43) value is 1
- gpio_request lable = cmd_gpio gpio = 48
- gpio: pin 48 (gpio 48) value is 0
- Net: Jz4775-9161
- Hit any key to stop autoboot: 1 0
- isvp_t20# [A gpio set 43; gpio clear 48; sleep 3; gpio clear 43; mmc rescan; ext4load mmc 0:1 0x80600000 uEnv.txt; env import -t 0x80600000 ${filesize}; boot;
- gpio_request lable = cmd_gpio gpio = 43
- gpio: pin 43 (gpio 43) value is 1
- gpio_request lable = cmd_gpio gpio = 48
- gpio: pin 48 (gpio 48) value is 0
- gpio_request lable = cmd_gpio gpio = 43
- gpio: pin 43 (gpio 43) value is 0
- 440 bytes read in 19 ms (22.5 KiB/s)
- 1769426 bytes read in 192 ms (8.8 MiB/s)
- ## Booting kernel from Legacy Image at 80600000 ...
- Image Name: Linux-3.10.14
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1769362 Bytes = 1.7 MiB
- Load Address: 80010000
- Entry Point: 803c2670
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.14 (root@ubuntu) (gcc version 4.7.4 (Buildroot 2016.02-00036-ga1ea3f8) ) #1 PREEMPT Fri Mar 22 00:11:37 CET 2019
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 RESET ERROR PC:53382B98
- [ 0.000000] CPU0 revision is: 00d00101 (Ingenic Xburst)
- [ 0.000000] FPU revision is: 00b70000
- [ 0.000000] CCLK:860MHz L2CLK:430Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 004df000 @ 00010000 (usable)
- [ 0.000000] memory: 00031000 @ 004ef000 (usable after init)
- [ 0.000000] User-defined physical RAM map:
- [ 0.000000] memory: 02800000 @ 00000000 (usable)
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x027fffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x027fffff]
- [ 0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes
- [ 0.000000] pls check processor_id[0x00d00101],sc_jz not support!
- [ 0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes.
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 10160
- [ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=40M@0x0 ispmem=8M@0x2800000 rmem=16M@0x3000000 init=/linuxrc root=/dev/mmcblk0p1 rootwait rootfstype=ext3 rw mtdparts=jz_sfc:256k(boot),2048k(kernel),3392k(root),640k(driver),4736k(appfs),2048k(backupk),640k(backupd),2048k(backupa),256k(config),256k(para),-(flag)
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Memory: 34704k/40960k available (3821k kernel code, 6256k reserved, 1166k data, 196k init, 0k highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:418
- [ 0.000000] clockevents_config_and_register success.
- [ 0.000024] Calibrating delay loop... 858.52 BogoMIPS (lpj=4292608)
- [ 0.087754] pid_max: default: 32768 minimum: 301
- [ 0.092742] Mount-cache hash table entries: 512
- [ 0.097854] Initializing cgroup subsys debug
- [ 0.102117] Initializing cgroup subsys freezer
- [ 0.107963] devtmpfs: initialized
- [ 0.112658] regulator-dummy: no parameters
- [ 0.116982] NET: Registered protocol family 16
- [ 0.136805] bio: create slab <bio-0> at 0
- [ 0.143137] jz-dma jz-dma: JZ SoC DMA initialized
- [ 0.148274] usbcore: registered new interface driver usbfs
- [ 0.153814] usbcore: registered new interface driver hub
- [ 0.159313] usbcore: registered new device driver usb
- [ 0.164532] i2c-gpio i2c-gpio.1: using pins 57 (SDA) and 58 (SCL)
- [ 0.170796] (null): set:249 hold:250 dev=100000000 h=500 l=500
- [ 0.176930] media: Linux media interface: v0.10
- [ 0.181483] Linux video capture interface: v2.00
- [ 0.188250] Switching to clocksource jz_clocksource
- [ 0.193400] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.200662] jz-dwc2 jz-dwc2: cgu clk gate get error
- [ 0.205584] jz-dwc2 jz-dwc2: regulator vbus get error
- [ 0.210666] DWC IN OTG MODE
- [ 0.363946] sft id =========================off
- [ 0.368539] dwc2 dwc2: Keep PHY ON
- [ 0.371908] dwc2 dwc2: Using Buffer DMA mode
- [ 0.576093] dwc2 dwc2: Core Release: 3.00a
- [ 0.580204] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller
- [ 0.586558] dwc2 dwc2: new USB bus registered, assigned bus number 1
- [ 0.594078] hub 1-0:1.0: USB hub found
- [ 0.597820] hub 1-0:1.0: 1 port detected
- [ 0.601940] dwc2 dwc2: DWC2 Host Initialized
- [ 0.606502] NET: Registered protocol family 2
- [ 0.611447] TCP established hash table entries: 512 (order: 0, 4096 bytes)
- [ 0.618451] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.624869] TCP: Hash tables configured (established 512 bind 512)
- [ 0.631152] TCP: reno registered
- [ 0.634401] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.640292] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.646952] NET: Registered protocol family 1
- [ 0.651723] freq_udelay_jiffys[0].max_num = 10
- [ 0.656204] cpufreq udelay loops_per_jiffy
- [ 0.660566] 12000 59885 59885
- [ 0.663845] 24000 119771 119771
- [ 0.667276] 60000 299428 299428
- [ 0.670719] 120000 598857 598857
- [ 0.674262] 200000 998095 998095
- [ 0.677782] 300000 1497142 1497142
- [ 0.681502] dwc2 dwc2: ID PIN CHANGED!
- [ 0.685331] init DWC as A_HOST
- [ 0.688405] 600000 2994285 2994285
- [ 0.692086] 792000 3952457 3952457
- [ 0.695913] 1008000 5030400 5030400
- [ 0.699635] 1200000 5988571 5988571
- [ 0.709917] exFAT: Version 1.2.9
- [ 0.713313] jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
- [ 0.719195] msgmni has been set to 67
- [ 0.724315] io scheduler noop registered
- [ 0.728255] io scheduler cfq registered (default)
- [ 0.735931] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1
- [ 0.744226] console [ttyS1] enabled, bootconsole disabled
- [ 0.744226] console [ttyS1] enabled, bootconsole disabled
- [ 0.760227] brd: module loaded
- [ 0.766088] loop: module loaded
- [ 0.770098] zram: Created 2 device(s) ...
- [ 0.774420] wifi regulator missing
- [ 0.778141] logger: created 256K log 'log_main'
- [ 0.783576] jz SADC driver registeres over!
- [ 0.789343] jz TCU driver register completed
- [ 0.794444] the id code = 1c7018, the flash name is GD25LQ128C
- [ 0.800498] #####unsupport ID is 1c7018 if the id not be 0x00,the flash can be ok,but the quad mode may be not support!!!!!
- [ 1.012023] JZ SFC Controller for SFC channel 0 driver register
- [ 1.018201] 11 cmdlinepart partitions found on MTD device jz_sfc
- [ 1.024441] Creating 11 MTD partitions on "jz_sfc":
- [ 1.029514] 0x000000000000-0x000000040000 : "boot"
- [ 1.035178] 0x000000040000-0x000000240000 : "kernel"
- [ 1.040960] 0x000000240000-0x000000590000 : "root"
- [ 1.046659] 0x000000590000-0x000000630000 : "driver"
- [ 1.052462] 0x000000630000-0x000000ad0000 : "appfs"
- [ 1.058280] 0x000000ad0000-0x000000cd0000 : "backupk"
- [ 1.064253] 0x000000cd0000-0x000000d70000 : "backupd"
- [ 1.070157] 0x000000d70000-0x000000f70000 : "backupa"
- [ 1.076149] 0x000000f70000-0x000000fb0000 : "config"
- [ 1.081969] 0x000000fb0000-0x000000ff0000 : "para"
- [ 1.087732] 0x000000ff0000-0x000001000000 : "flag"
- [ 1.093448] SPI NOR MTD LOAD OK
- [ 1.096775] tun: Universal TUN/TAP device driver, 1.6
- [ 1.102007] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.108673] usbcore: registered new interface driver zd1201
- [ 1.114942] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing
- [ 1.123194] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0
- [ 1.153169] jzmmc_v1.2 jzmmc_v1.2.0: register success!
- [ 1.158550] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing
- [ 1.203273] jzmmc_v1.2 jzmmc_v1.2.1: register success!
- [ 1.209068] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.216443] ------------ init codec driver start!
- [ 1.221400] jz_codec_probe: probe() start
- [ 1.225596] jz_codec_probe, codec iomem is :0xb0021000
- [ 1.230932] jz_codec_probe: probe() done
- [ 1.235087] i2s global init
- [ 1.237993] current codec is :8221cd80
- [ 1.242131] i2s init success.
- [ 1.643996] TCP: cubic registered
- [ 1.647444] NET: Registered protocol family 17
- [ 1.653230] input: gpio-keys as /devices/platform/gpio-keys/input/input0
- [ 1.660506] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 1.669134] Waiting for root device /dev/mmcblk0p1...
- [ 1.793960] dwc2 dwc2: ++OTG Interrupt: A-Device Timeout Change++
- [ 2.163111] mmc0: new high speed SDHC card at address 0001
- [ 2.169127] mmcblk0: mmc0:0001 SD16G 7.44 GiB
- [ 2.175185] mmcblk0: p1 p2
- [ 2.224313] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
- [ 2.242593] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.251123] VFS: Mounted root (ext3 filesystem) on device 179:1.
- [ 2.262702] devtmpfs: mounted
- [ 2.266203] Freeing unused kernel memory: 196K (804ef000 - 80520000)
- Starting logging: OK
- 1
- [ 2.718193] zram0: detected capacity change from 0 to 8388608
- Setting up swapspace version 1, size = 8384512 bytes
- [ 2.729800] Adding 8188k swap on /dev/zram0. Priority:-1 extents:1 across:8188k SS
- Starting mdev...
- Initializing random number generator... done.
- Starting network...
- Initializing wlan driver....
- [ 3.593305] RTL871X: module init start
- [ 3.597203] RTL871X: rtl8189es v4.3.18.2_17395.20160422
- [ 3.602615] ######platform_wifi_power_on:
- [ 3.648905] mmc1: card claims to support voltages below the defined range. These will be ignored.
- [ 3.669122] mmc1: new SDIO card at address 0001
- [ 4.953641] RTL871X: module init ret=0
- [ 5.123921] RTL871X: module init start
- [ 5.127820] RTL871X: rtl8189fs v4.3.24.8_22657.20170607
- [ 5.137989] ######platform_wifi_power_on:
- [ 6.325887] RTL871X: HW EFUSE
- [ 6.328995] RTL871X: hal_com_config_channel_plan chplan:0x20
- [ 6.433365] RTL871X: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
- [ 6.444869] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=00:e0:4c:56:05:6f
- [ 6.480421] RTL871X: module init ret=0
- no such entry!
- Enabling wifi AP mode
- killall: udhcpc: no process killed
- killall: wpa_supplicant: no process killed
- killall: hostapd: no process killed
- killall: udhcpd: no process killed
- Configuration file: /tmp/hostapd.conf
- rfkill: Cannot open RFKILL control device
- nl80211: Could not re-add multicast membership for vendor events: -2 (No such file or directory)
- Using interface wlan0 with hwaddr 00:e0:4c:56:05:6f and ssid "openfang05"
- [ 7.584329] RTL871X: assoc success
- wlan0: interface state UNINITIALIZED->ENABLED
- wlan0: AP-ENABLED
- no such entry!
- [ 8.558812] [EXFAT] trying to mount...
- [ 8.617340] [EXFAT] mounted successfully
- [ 8.640036] motor_probe730
- [ 8.666735] name : i2c-gpio1 nr : 1
- [ 8.670358] name : i2c0 nr : 0
- [ 8.763566] sensor_read: addr=0xa value = 0xf
- [ 8.768666] sensor_read: addr=0xb value = 0x23
- [ 8.863563] sensor_read: addr=0xa value = 0xf
- [ 8.868658] sensor_read: addr=0xb value = 0x23
- [ 8.873666] info: success sensor find : jxf23
- [ 8.912957] register all isp device successfully!
- [ 8.923393] @@@@ tx-isp-probe ok @@@@@
- no such entry!
- no such entry!
- sh: write error: Invalid argument
- /etc/init.d/S45fang: line 102: can't create /sys/class/gpio/gpio/direction: nonexistent directory
- /etc/init.d/S45fang: line 102: can't create /sys/class/gpio/gpio/active_low: nonexistent directory
- no such entry!
- sh: write error: Invalid argument
- /etc/init.d/S45fang: line 102: can't create /sys/class/gpio/gpio/direction: nonexistent directory
- /etc/init.d/S45fang: line 102: can't create /sys/class/gpio/gpio/active_low: nonexistent directory
- no such entry!
- sh: write error: Invalid argument
- /etc/init.d/S45fang: line 102: can't create /sys/class/gpio/gpio/direction: nonexistent directory
- /etc/init.d/S45fang: line 102: can't create /sys/class/gpio/gpio/active_low: nonexistent directory
- Starting dropbear sshd: OK
- Starting lighttpd: 1970-01-01 00:00:09.530 ( 0.001s) [main thread ] main.cpp:455 0| === Dumping environment variables ===
- 1970-01-01 00:00:09.531 ( 0.002s) [main thread ] main.cpp:458 0| USER=root
- 1970-01-01 00:00:09.531 ( 0.002s) [main thread ] main.cpp:458 0| SHLVL=2
- 1970-01-01 00:00:09.531 ( 0.002s) [main thread ] main.cpp:458 0| HOME=/
- 1970-01-01 00:00:09.531 ( 0.002s) [main thread ] main.cpp:458 0| TERM=vt102
- 1970-01-01 00:00:09.532 ( 0.002s) [main thread ] main.cpp:458 0| PATH=/sbin:/usr/sbin:/bin:/usr/bin
- 1970-01-01 00:00:09.532 ( 0.002s) [main thread ] main.cpp:458 0| SHELL=/bin/sh
- 1970-01-01 00:00:09.532 ( 0.003s) [main thread ] main.cpp:458 0| PWD=/
- 1970-01-01 00:00:09.532 ( 0.003s) [main thread ] main.cpp:458 0| rmem=16M@0x3000000
- 1970-01-01 00:00:09.532 ( 0.003s) [main thread ] main.cpp:461 0| === end ===
- 1970-01-01 00:00:0[ 9.622827] set sensor gpio as PA-low-10bit
- 9.564 ( 0.035s) [main thread ] ImpEncoder.cpp:685 0| Try to read extra configuration on /usr/bin/v4l2rtspserver-v0.0.8.ini
- 1970-01-01 00:00:09.565 ( 0.036s) [main thread ] ImpEncoder.cpp:688 0| Can't load 'v4l2rstpserver.ini'. Enable default paths
- 1970-01-01 00:00:09.565 ( 0.036s) [main thread ] ImpEncoder.cpp:971 0| Found Sensor with Name:jxf23
- 1970-01-01 00:00:09.565 ( 0.036s) [main thread ] ImpEncoder.cpp:972 0| Found Sensor with Address:64
- 1970-01-01 00:00:09: (network.c.542) SSL: couldn't read X509 certificate from '/etc/ssl/lighttpd.pem'
- OK
- Starting mosquitto: OK
- [ 9.790052] jxf23 0-0040: jxf23 chip found @ 0x40 (i2c0)
- [ 9.802476] tx_isp: Registered sensor subdevice jxf23 0-0040
- [ 9.821442] ISP: open /etc/sensor/jxf23.bin file for isp calibrate read failed
- Welcome to openfang
- openfang login: [ 10.147415] ###### image_tuning_v4l2_open 4329 #######
- 1970-01-01 00:00:10.152 ( 0.623s) [main thread ] ImpEncoder.cpp:1206 0| encoderMode: 2
- 1970-01-01 00:00:10.153 ( 0.624s) [main thread ] ImpEncoder.cpp:1245 0| Using VBR mode.
- 1970-01-01 [ 10.170473] &&& chan1 scaler.max_width = 1920 max_height = 1080 min_width = 128 min_height = 128 &&&
- 00:00:10.153 ( 0.624s) [main thread ] ImpEncoder.cpp:1255 0| Set initial bitrate (default value) to 2666
- i264e[info]: profile Constrained Baseline, level 3.2
- 1970-01-01 00:00:10.200 ( 0.671s) [update_thread ] OSD.cpp:22 0| [OSD]: Created OSD(1248, 0, 32, 32, 0)
- 1970-01-01 00:00:10.201 ( 0.672s) [update_thread ] OSD.cpp:22 0| [OSD]: Created OSD(0, 0, 1280, 10, 1)
- 1970-01-01 00:00:10.202 ( 0.672s) [update_thread ] ImpEncoder.cpp:181 0| Attempt to changed Bitrate to 2666
- 1970-01-01 00:00:10.202 ( 0.673s) [update_thread ] ImpEncoder.cpp:199 0| Setting VBR maxBitrate.
- 1970-01-01 00:00:10.202 ( 0.673s) [update_thread ] ImpEncoder.cpp:216 0| Attempt to changed fps to 25,1
- 1970-01-01 00:00:10.202 ( 0.673s) [update_thread ] ImpEncoder.cpp:250 0| Font name:/usr/share/fonts/NotoSans-Regular.ttf
- 1970-01-01 00:00:10.227 ( 0.698s) [update_thread ] ImpEncoder.cpp:262 0| Changed OSD font
- 1970-01-01 00:00:10.239 ( 0.710s) [update_thread ] ImpEncoder.cpp:292 0| Max font bitmap height is 31 and baseline offset is -6
- 1970-01-01 00:00:10.240 ( 0.711s) [update_thread ] ImpEncoder.cpp:294 0| Changed OSD size
- 1970-01-01 00:00:10.240 ( 0.711s) [update_thread ] ImpEncoder.cpp:314 0| Deactivate motion
- 1970-01-01 00:00:10.240 ( 0.711s) [update_thread ] ImpEncoder.cpp:338 0| Display motion OSD color=-1
- 1970-01-01 00:00:10.685 ( 1.155s) [DeviceSource ] DeviceSource.cpp:91 0| begin thread
- 1970-01-01 00:00:10.690 ( 1.161s) [main thread ] main.cpp:152 0| Play this stream using the URL "rtsp://127.0.1.1:8554/unicast"
- no such entry!
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio0/value: nonexistent directory
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio26/value: nonexistent directory
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio25/value: nonexistent directory
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio25/value: nonexistent directory
- 1970-01-01 00:00:17.013 ( 7.484s) [update_thread ] I[ 17.017165] tx_isp: Can't get the parameters of isp tuning!
- mpEncoder.cpp:176 0| Changed NIGHTVISION
- no such entry!
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio1/value: nonexistent directory
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio25/value: nonexistent directory
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio26/value: nonexistent directory
- /opt/scripts/nightmode.sh: line 5: can't create /sys/class/gpio/gpio26/value: nonexistent directory
- 1970-01-01 00:00:53.013 ( 43.484s) [update_thread ] I[ 53.017059] tx_isp: Can't get the parameters of isp tuning!
- mpEncoder.cpp:176 0| Changed NIGHTVISION
- 1970-01-01 00:00:53.027 ( 43.498s) [update_thread ] ImpEncoder.cpp:1420 ERR| IMP_ISP_Tuning_SetISPRunningMode(0) error:-1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement