SHARE
TWEET

BPi-M3, flashing Android 5.1.1 to eMMC using LiveSuit

a guest Nov 30th, 2015 84 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. beign to init dram
  2. DRAM DRIVE INFO: V1.1
  3. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  4. DRAM normal_mode value: 00000001
  5. DRAM CLK =732 MHZ
  6. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  7. PMU: AXP81X
  8. ddr voltage = 1200 mv
  9. using ic A83T
  10. using axp AXP813
  11. DRAM zq value: 00003bfb
  12. init dram ok
  13. [      3.930]
  14.  
  15. U-Boot 2011.09-rc1-dirty (Nov 05 2015 - 23:11:51) Allwinner Technology
  16.  
  17. [      3.938]version: 2.1.0
  18. normal mode
  19. [      4.014]pmbus:   normal or secure os
  20. ready
  21. [      4.018]PMU: AXP81X
  22. [      4.020]PMU: AXP81X found
  23. bat_vol=0, ratio=100
  24. [      4.026]PMU: dcdc2 900
  25. [      4.028]PMU: pll1 1008 Mhz
  26. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  27. set power on vol to default
  28. dcdc1_vol = 3300, onoff=1
  29. dcdc2_vol = 900, onoff=1
  30. dcdc3_vol = 900, onoff=1
  31. dcdc4_vol = 900, onoff=1
  32. dcdc6_vol = 900, onoff=1
  33. aldo1_vol = 1800, onoff=0
  34. aldo2_vol = 1800, onoff=1
  35. aldo3_vol = 3000, onoff=1
  36. eldo2_vol = 1800, onoff=0
  37. dldo1_vol = 3300, onoff=0
  38. dldo2_vol = 3300, onoff=0
  39. dldo3_vol = 2500, onoff=1
  40. dldo4_vol = 2800, onoff=0
  41. fldo2_vol = 900, onoff=1
  42. find power_sply to end
  43. supply=dcdc1
  44. axp=axp81x, supply=dcdc1, vol=3300
  45. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  46. supply=dcdc1
  47. axp=axp81x, supply=dcdc1, vol=3300
  48. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  49. supply=dldo3
  50. axp=axp81x, supply=dldo3, vol=1800
  51. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  52. supply=dcdc1
  53. axp=axp81x, supply=dcdc1, vol=3300
  54. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  55. supply=dcdc1
  56. axp=axp81x, supply=dcdc1, vol=3300
  57. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  58. supply=dcdc1
  59. axp=axp81x, supply=dcdc1, vol=3300
  60. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  61. supply=dcdc1
  62. axp=axp81x, supply=dcdc1, vol=3300
  63. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  64. supply=aldo3
  65. axp=axp81x, supply=aldo3, vol=3000
  66. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  67. config gpio bias voltage finish
  68. vbus exist
  69. no battery, limit to dc
  70. ac100 reg 0x00 = 0x101
  71. ac100 reg 0xd0 = 0x0
  72. ac100 reg 0xd1 = 0x0
  73. dram_para_set start
  74. dram_para_set end
  75. [      4.234]DRAM:  512 MiB
  76. relocation Offset is: 15af9000
  77. gic: normal or no secure os mode
  78. workmode = 16
  79. NAND_UbootProbe start
  80. NB1 : enter phy init
  81. NandHwInit: Start Nand Hardware initializing .....
  82. uboot:physical version: 2 20 20141023 1122
  83. [NAND] channel cnt is 1
  84. ndfc version: 1
  85. ndfc dma mode: MBUS DMA
  86. Reset NDFC 0
  87. NFC Randomizer start.
  88. NFC_ResetChip: 0x101, 0x100 0x10095
  89. NFC_ResetChip: 0xff, ch: 0
  90. [PHY_DBG] CH 0 Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
  91. nand id of two channel is not the same, set to 1 channel mode
  92. [SCAN_DBG] Nand flash chip id is:0x0 0x0 0x0 0x0 0x0 0x0
  93. [SCAN_ERR] search nand physical architecture parameter failed!
  94. [ERR]NandHwInit: SCN_AnalyzeNandSystem() failed!
  95. NandHwInit: End Nand Hardware initializing ..... FAIL!
  96. NB1 : nand phy init fail
  97. NB1 : enter phy Exit
  98. nand release dma:0
  99. NAND_UbootProbe end: 0xffffffff
  100. try nand fail
  101. [      4.351][mmc]: mmc driver ver 2015-04-13 14:50:00
  102. [      4.356][mmc]: get sdc_phy_wipe fail.
  103. [      4.360][mmc]: get sdc0 sdc_erase fail.
  104. [      4.364][mmc]: get sdc_2xmode ok, val = 1
  105. [      4.368][mmc]: get sdc_ddrmode ok, val = 1
  106. [      4.372][mmc]: get sdc_f_max fail,use default  50000000Hz
  107. [      4.378][mmc]: get card_line ok, card_line = 8
  108. [      4.383][mmc]: get sdc_ex_dly_used fail,use default
  109. [      4.388][mmc]: SUNXI SD/MMC: 2
  110. [      4.401][mmc]: *Try SD card 2*
  111. [      4.404][mmc]: mmc 2 cmd 8 err 100
  112. [      4.410][mmc]: mmc send if cond failed
  113. [      4.414][mmc]: mmc 2 cmd 55 err 100
  114. [      4.419][mmc]: send app cmd failed
  115. [      4.422][mmc]: *Try MMC card 2*
  116. [      4.489][mmc]: mmc re-update_phase
  117. [      4.494][mmc]: mmc re-update_phase
  118. [      4.499][mmc]: mmc re-update_phase
  119. [      4.504][mmc]: ddr8
  120. [      4.506][mmc]: mmc re-update_phase
  121. [      4.519][mmc]: CID 0x1501004d 0x38473147 0x4303dc0d 0xb061506f
  122. [      4.524][mmc]: MMC ver 4.5
  123. [      4.527][mmc]: mmc clk 50000000
  124. [      4.530][mmc]: SD/MMC Card: 8bit, capacity: 7456MB
  125. [      4.535][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
  126. [      4.541][mmc]: ***SD/MMC 2 init OK!!!***
  127. [      4.546][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
  128. [      4.552][mmc]: secure_feature 0x55
  129. [      4.555][mmc]: secure_removal_type  0x0
  130. read flash error
  131. out of usb burn from boot: not boot mode
  132. In:    serial
  133. Out:   serial
  134. Err:   serial
  135. --------fastboot partitions--------
  136. mbr not exist
  137. [      4.573]Hit any key to stop autoboot:  0
  138. work mode=0x10
  139. run usb efex
  140. buf queue page size = 65536
  141. delay time 2500
  142. usb init ok
  143. set address 0x19
  144. SUNXI_EFEX_ERASE_TAG
  145. erase_flag = 0x1
  146. FEX_CMD_fes_verify_status
  147. FEX_CMD_fes_verify last err=0
  148. the 0 mbr table is ok
  149. the 1 mbr table is ok
  150. the 2 mbr table is ok
  151. the 3 mbr table is ok
  152. *************MBR DUMP***************
  153. total mbr part 11
  154.  
  155. part[0] name      :bootloader
  156. part[0] classname :DISK
  157. part[0] addrlo    :0x8000
  158. part[0] lenlo     :0x8000
  159. part[0] user_type :32768
  160. part[0] keydata   :0
  161. part[0] ro        :0
  162.  
  163. part[1] name      :env
  164. part[1] classname :DISK
  165. part[1] addrlo    :0x10000
  166. part[1] lenlo     :0x8000
  167. part[1] user_type :32768
  168. part[1] keydata   :0
  169. part[1] ro        :0
  170.  
  171. part[2] name      :boot
  172. part[2] classname :DISK
  173. part[2] addrlo    :0x18000
  174. part[2] lenlo     :0x8000
  175. part[2] user_type :32768
  176. part[2] keydata   :0
  177. part[2] ro        :0
  178.  
  179. part[3] name      :system
  180. part[3] classname :DISK
  181. part[3] addrlo    :0x20000
  182. part[3] lenlo     :0x300000
  183. part[3] user_type :32768
  184. part[3] keydata   :0
  185. part[3] ro        :0
  186.  
  187. part[4] name      :misc
  188. part[4] classname :DISK
  189. part[4] addrlo    :0x320000
  190. part[4] lenlo     :0x8000
  191. part[4] user_type :32768
  192. part[4] keydata   :0
  193. part[4] ro        :0
  194.  
  195. part[5] name      :recovery
  196. part[5] classname :DISK
  197. part[5] addrlo    :0x328000
  198. part[5] lenlo     :0x10000
  199. part[5] user_type :32768
  200. part[5] keydata   :0
  201. part[5] ro        :0
  202.  
  203. part[6] name      :cache
  204. part[6] classname :DISK
  205. part[6] addrlo    :0x338000
  206. part[6] lenlo     :0x180000
  207. part[6] user_type :32768
  208. part[6] keydata   :0
  209. part[6] ro        :0
  210.  
  211. part[7] name      :metadata
  212. part[7] classname :DISK
  213. part[7] addrlo    :0x4b8000
  214. part[7] lenlo     :0x8000
  215. part[7] user_type :32768
  216. part[7] keydata   :0
  217. part[7] ro        :0
  218.  
  219. part[8] name      :private
  220. part[8] classname :DISK
  221. part[8] addrlo    :0x4c0000
  222. part[8] lenlo     :0x8000
  223. part[8] user_type :32768
  224. part[8] keydata   :0
  225. part[8] ro        :0
  226.  
  227. part[9] name      :alog
  228. part[9] classname :DISK
  229. part[9] addrlo    :0x4c8000
  230. part[9] lenlo     :0x28000
  231. part[9] user_type :32768
  232. part[9] keydata   :0
  233. part[9] ro        :0
  234.  
  235. part[10] name      :UDISK
  236. part[10] classname :DISK
  237. part[10] addrlo    :0x4f0000
  238. part[10] lenlo     :0x0
  239. part[10] user_type :33024
  240. part[10] keydata   :0
  241. part[10] ro        :0
  242.  
  243. total part: 12
  244. mbr 0, 8000, 8000
  245. bootloader 1, 8000, 8000
  246. env 2, 8000, 8000
  247. boot 3, 8000, 8000
  248. system 4, 300000, 8000
  249. misc 5, 8000, 8000
  250. recovery 6, 10000, 8000
  251. cache 7, 180000, 8000
  252. metadata 8, 8000, 8000
  253. private 9, 8000, 8000
  254. alog 10, 28000, 8000
  255. UDISK 11, 0, 8100
  256. do need erase flash
  257. private part exist
  258. the 0 mbr table is bad
  259. the mbr on flash is bad
  260. [      7.750][mmc]: mmc start mass pro boot part...
  261. [      7.758][mmc]: mmc re-update_phase
  262. [      7.762][mmc]: mmc re-update_phase
  263. [      7.766][mmc]: mmc re-update_phase
  264. [      7.778][mmc]: mmc re-update_phase
  265. [      7.782][mmc]: mmc start write user part after write boot part...
  266. erase boot0, size:32k, write 0x00
  267. erase env part
  268. [      7.795][mmc]: erase from: 106496, to: 139263, cnt: 32768, erase_group: 1024
  269. [      7.808][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x85a us
  270. erase boot part
  271. [      7.815][mmc]: erase from: 139264, to: 172031, cnt: 32768, erase_group: 1024
  272. [      7.827][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x767 us
  273. erase system part
  274. [      7.835][mmc]: erase from: 172032, to: 3317759, cnt: 3145728, erase_group: 1024
  275. [      8.127][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x19b14 us
  276. erase misc part
  277. [      8.134][mmc]: erase from: 3317760, to: 3350527, cnt: 32768, erase_group: 1024
  278. [      8.147][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x766 us
  279. erase recovery part
  280. [      8.154][mmc]: erase from: 3350528, to: 3416063, cnt: 65536, erase_group: 1024
  281. [      8.170][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0xb97 us
  282. erase cache part
  283. [      8.177][mmc]: erase from: 3416064, to: 4988927, cnt: 1572864, erase_group: 1024
  284. [      8.332][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0xd40a us
  285. erase metadata part
  286. [      8.339][mmc]: erase from: 4988928, to: 5021695, cnt: 32768, erase_group: 1024
  287. [      8.352][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x766 us
  288. erase private part
  289. [      8.359][mmc]: erase from: 5021696, to: 5054463, cnt: 32768, erase_group: 1024
  290. [      8.372][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x766 us
  291. erase alog part
  292. [      8.379][mmc]: erase from: 5054464, to: 5218303, cnt: 163840, erase_group: 1024
  293. [      8.403][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x1829 us
  294. erase UDISK part
  295. sunxi_sprite_mmc_phyerase: @nr is 0, erase from @from to end
  296. [      8.416][mmc]: erase from: 5218304, to: 15268863, cnt: 10050560, erase_group: 1024
  297. [      9.021][mmc]: mmc_send_cmd: cmd 38 wait rsp busy 0x35d0d us
  298. [      9.026][mmc]: mmc_mmc_erase: some sectors in emmc are ignored!
  299. [      9.032][mmc]: --0: from15268864  nr1023
  300. write zeros-0: from 0xe8fc00 to 0xe8fffe
  301. [      9.040][mmc]: mmc start mass pro boot part...
  302. [      9.045][mmc]: boot0 start address 15268864
  303. card erase all
  304. SUNXI_EFEX_MBR_TAG
  305. mbr size = 0x10000
  306. begin to write standard mbr
  307. [      9.090][mmc]: mmc start mass pro boot part...
  308. [      9.095][mmc]: boot0 start address 1
  309. [      9.100][mmc]: mmc start mass pro boot part...
  310. [      9.104][mmc]: boot0 start address 2
  311. [      9.109][mmc]: mmc start mass pro boot part...
  312. [      9.113][mmc]: boot0 start address 3
  313. [      9.118][mmc]: mmc start mass pro boot part...
  314. [      9.123][mmc]: boot0 start address 4
  315. [      9.127][mmc]: mmc start mass pro boot part...
  316. [      9.132][mmc]: boot0 start address 5
  317. [      9.137][mmc]: mmc start mass pro boot part...
  318. [      9.141][mmc]: boot0 start address 6
  319. [      9.146][mmc]: mmc start mass pro boot part...
  320. [      9.150][mmc]: boot0 start address 7
  321. [      9.155][mmc]: mmc start mass pro boot part...
  322. [      9.160][mmc]: boot0 start address 8
  323. [      9.165][mmc]: mmc start mass pro boot part...
  324. [      9.169][mmc]: boot0 start address 9
  325. [      9.174][mmc]: mmc start mass pro boot part...
  326. [      9.178][mmc]: boot0 start address 0
  327. successed to write standard mbr
  328. FEX_CMD_fes_verify_status
  329. FEX_CMD_fes_verify last err=0
  330. flash sectors: 0xe90000
  331. FEX_CMD_fes_verify_value, start 0x8000, size high 0x0:low 0x6f6400
  332. FEX_CMD_fes_verify_value 0x7f81840e
  333. FEX_CMD_fes_verify_value, start 0x10000, size high 0x0:low 0x20000
  334. FEX_CMD_fes_verify_value 0x338e87e9
  335. FEX_CMD_fes_verify_value, start 0x18000, size high 0x0:low 0xce2800
  336. FEX_CMD_fes_verify_value 0xf80f8cdc
  337. FEX_CMD_fes_verify_value, start 0x328000, size high 0x0:low 0xdc4000
  338. FEX_CMD_fes_verify_value 0x75875e50
  339. SUNXI_EFEX_BOOT1_TAG
  340. boot1 size = 0xd4000
  341. uboot size = 0xd4000
  342. storage type = 2
  343. mmc down uboot
  344. [     86.152][mmc]: mmc start mass pro boot part...
  345. [     86.156][mmc]: boot0 start address 32800
  346. FEX_CMD_fes_verify_status
  347. FEX_CMD_fes_verify last err=0
  348. SUNXI_EFEX_BOOT0_TAG
  349. boot0 size = 0x8000
  350. dram para[0] = 2dc
  351. dram para[1] = 7
  352. dram para[2] = 3bfb
  353. dram para[3] = 1
  354. dram para[4] = 10f40800
  355. dram para[5] = 1000
  356. dram para[6] = 0
  357. dram para[7] = c3
  358. dram para[8] = a
  359. dram para[9] = 2
  360. dram para[10] = 49a25a
  361. dram para[11] = 1b1b290
  362. dram para[12] = 4d02c
  363. dram para[13] = 0
  364. dram para[14] = 0
  365. dram para[15] = 0
  366. dram para[16] = 0
  367. dram para[17] = 0
  368. dram para[18] = 1
  369. dram para[19] = 5008888
  370. dram para[20] = 8888
  371. dram para[21] = 5005
  372. dram para[22] = 0
  373. dram para[23] = c01
  374. dram para[24] = 0
  375. dram para[25] = 0
  376. dram para[26] = 0
  377. dram para[27] = 0
  378. dram para[28] = 0
  379. dram para[29] = 0
  380. dram para[30] = 0
  381. dram para[31] = 0
  382. storage type = 2
  383. [     86.263][mmc]: mmc start mass pro boot part...
  384. [     86.268][mmc]: mmc re-update_phase
  385. [     86.271][mmc]: mmc re-update_phase
  386. [     86.275][mmc]: mmc re-update_phase
  387. [     86.282][mmc]: mmc re-update_phase
  388. [     86.285][mmc]: mmc start write user part after write boot part...
  389. FEX_CMD_fes_verify_status
  390. FEX_CMD_fes_verify last err=0
  391. sunxi_efex_next_action=2
  392. exit usb
  393. next work 2
  394. SUNXI_UPDATE_NEXT_ACTION_REBOOT
  395. set next mode 14
  396. drv_disp_exit
  397. [     86.345][mmc]: mmc exit start
  398. [     86.357][mmc]: mmc 2 cmd 8 err 100
  399. [     86.362][mmc]: mmc send if cond failed
  400. [     86.366][mmc]: mmc 2 cmd 55 err 100
  401. [     86.371][mmc]: send app cmd failed
  402. [     86.383][mmc]: get sdc_phy_wipe fail.
  403. [     86.387][mmc]: get sdc0 sdc_erase fail.
  404. [     86.391][mmc]: get sdc_2xmode ok, val = 1
  405. [     86.395][mmc]: get sdc_ddrmode ok, val = 1
  406. [     86.399][mmc]: get sdc_f_max fail,use default  50000000Hz
  407. [     86.404][mmc]: get card_line ok, card_line = 8
  408. [     86.409][mmc]: get sdc_ex_dly_used fail,use default
  409. [     86.414][mmc]: mmc 2 exit ok
  410. HELLO! BOOT0 is starting!
  411. boot0 version : 4.0.0
  412. rtc[1] value = 0x00010000
  413. rtc[2] value = 0x00020000
  414. rtc[3] value = 0x00030000
  415. DRAM DRIVE INFO: V1.1
  416. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  417. DRAM normal_mode value: 00000001
  418. DRAM CLK =732 MHZ
  419. rsb_send_initseq: rsb clk 400Khz -> 3Mhz
  420. PMU: AXP81X
  421. ddr voltage = 1200 mv
  422. ID CHECK VERSION: V0.2
  423. using ic A83T
  424. using axp AXP813
  425. DRAM zq value: 00003bfb
  426. dram size =2048
  427. card boot number = 2
  428. card no is 2
  429. sdcard 2 line count 8
  430. [mmc]: mmc driver ver 2015-04-13 16:05:39
  431. [mmc]: ***Try SD card 2***
  432. [mmc]: mmc 2 cmd 8 err 00000100
  433. [mmc]: mmc 2 cmd 8 err 00000100
  434. [mmc]: mmc 2 send if cond failed
  435. [mmc]: mmc 2 cmd 55 err 00000100
  436. [mmc]: mmc 2 cmd 55 err 00000100
  437. [mmc]: mmc 2 send app cmd failed
  438. [mmc]: ***Try MMC card 2***
  439. [mmc]: mmc re-update_phase
  440. [mmc]: mmc re-update_phase
  441. [mmc]: 8bit ddr!!!
  442. [mmc]: mmc re-update_phase
  443. [mmc]: MMC ver 4.5
  444. [mmc]: SD/MMC Card: 8bit, capacity: 7456MB
  445. [mmc]: vendor: Man 00150100 Snr 03dc0db0
  446. [mmc]: product: M8G1G
  447. [mmc]: revision: 4.3
  448. [mmc]: ***SD/MMC 2 init OK!!!***
  449. sdcard 2 init ok
  450. The size of uboot is 000d4000.
  451. sum=d800d490
  452. src_sum=d800d490
  453. set_mmc_para,sdly 50M 0
  454. set_mmc_para,sdly 25M 0
  455. Succeed in loading uboot from sdmmc flash.
  456. Ready to disable icache.
  457. Jump to secend Boot.
  458. [      0.204]
  459.  
  460. U-Boot 2011.09-rc1-dirty (Nov 05 2015 - 23:11:51) Allwinner Technology
  461.  
  462. [      0.212]version: 2.1.0
  463. normal mode
  464. [      0.288]pmbus:   normal or secure os
  465. ready
  466. [      0.292]PMU: AXP81X
  467. [      0.294]PMU: AXP81X found
  468. bat_vol=0, ratio=100
  469. [      0.300]PMU: dcdc2 900
  470. [      0.302]PMU: pll1 1008 Mhz
  471. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  472. set power on vol to default
  473. dcdc1_vol = 3300, onoff=1
  474. dcdc2_vol = 900, onoff=1
  475. dcdc3_vol = 900, onoff=1
  476. dcdc4_vol = 900, onoff=1
  477. dcdc6_vol = 900, onoff=1
  478. aldo1_vol = 1800, onoff=0
  479. aldo2_vol = 1800, onoff=1
  480. aldo3_vol = 3000, onoff=1
  481. eldo2_vol = 1800, onoff=0
  482. dldo1_vol = 3300, onoff=0
  483. dldo2_vol = 3300, onoff=0
  484. dldo3_vol = 2500, onoff=1
  485. dldo4_vol = 2800, onoff=0
  486. fldo2_vol = 900, onoff=1
  487. find power_sply to end
  488. supply=dcdc1
  489. axp=axp81x, supply=dcdc1, vol=3300
  490. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  491. supply=dcdc1
  492. axp=axp81x, supply=dcdc1, vol=3300
  493. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  494. supply=dldo3
  495. axp=axp81x, supply=dldo3, vol=1800
  496. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  497. supply=dcdc1
  498. axp=axp81x, supply=dcdc1, vol=3300
  499. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  500. supply=dcdc1
  501. axp=axp81x, supply=dcdc1, vol=3300
  502. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  503. supply=dcdc1
  504. axp=axp81x, supply=dcdc1, vol=3300
  505. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  506. supply=dcdc1
  507. axp=axp81x, supply=dcdc1, vol=3300
  508. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  509. supply=aldo3
  510. axp=axp81x, supply=aldo3, vol=3000
  511. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  512. config gpio bias voltage finish
  513. vbus exist
  514. no battery, limit to dc
  515. ac100 reg 0x00 = 0x101
  516. ac100 reg 0xd0 = 0x0
  517. ac100 reg 0xd1 = 0x0
  518. fel key old mode
  519. run key detect
  520. no key found
  521. no key input
  522. dram_para_set start
  523. dram_para_set end
  524. [      0.524]DRAM:  2 GiB
  525. relocation Offset is: 75af9000
  526. gic: normal or no secure os mode
  527. script config pll_de to 504 Mhz
  528. script config pll_video1 to 297 Mhz
  529. Not Found clk pll_video in script
  530. enable power vcc-hdmi-18, ret=0
  531. DRV_DISP_Init end
  532. [      0.685]boot_disp.output_disp=1
  533. [      0.688]boot_disp.output_type=3
  534. [      0.692]boot_disp.output_mode=5
  535. [      0.695]fetch script data boot_disp.auto_hpd fail
  536. disp1 device type(4) enable
  537. attched ok, mgr1<-->device1, type=4, mode=5----
  538. ready to set mode
  539. workmode = 0
  540. MMC:     2
  541. [      0.710][mmc]: mmc driver ver 2015-04-13 14:50:00
  542. [      0.715][mmc]: get sdc_phy_wipe fail.
  543. [      0.719][mmc]: get sdc0 sdc_erase fail.
  544. [      0.723][mmc]: get sdc_2xmode ok, val = 1
  545. [      0.727][mmc]: get sdc_ddrmode ok, val = 1
  546. [      0.731][mmc]: get sdc_f_max fail,use default  50000000Hz
  547. [      0.737][mmc]: get card_line ok, card_line = 8
  548. [      0.741][mmc]: get sdc_ex_dly_used fail,use default
  549. [      0.747][mmc]: SUNXI SD/MMC: 2
  550. [      0.760][mmc]: *Try SD card 2*
  551. [      0.763][mmc]: mmc 2 cmd 8 err 100
  552. [      0.769][mmc]: mmc send if cond failed
  553. [      0.773][mmc]: mmc 2 cmd 55 err 100
  554. [      0.778][mmc]: send app cmd failed
  555. [      0.781][mmc]: *Try MMC card 2*
  556. [      0.821][mmc]: mmc re-update_phase
  557. [      0.826][mmc]: mmc re-update_phase
  558. [      0.831][mmc]: mmc re-update_phase
  559. [      0.836][mmc]: ddr8
  560. [      0.838][mmc]: mmc re-update_phase
  561. [      0.851][mmc]: CID 0x1501004d 0x38473147 0x4303dc0d 0xb061506f
  562. [      0.856][mmc]: MMC ver 4.5
  563. [      0.859][mmc]: mmc clk 50000000
  564. [      0.862][mmc]: SD/MMC Card: 8bit, capacity: 7456MB
  565. [      0.867][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
  566. [      0.873][mmc]: ***SD/MMC 2 init OK!!!***
  567. [      0.878][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
  568. [      0.883][mmc]: secure_feature 0x55
  569. [      0.887][mmc]: secure_removal_type  0x0
  570. [      0.891]sunxi flash init ok
  571. the secure storage map is empty
  572. no item name key_burned_flag in the map
  573. sunxi secure storage has no flag
  574. [      0.904]usb burn from boot
  575. delay time 0
  576. [      0.975]usb prepare ok
  577. usb sof ok
  578. vbus pc exist ,limit to pc
  579. [      1.187]usb probe ok
  580. [      1.189]usb setup ok
  581. set address 0x14
  582. sunxi usb error: received bytes 0x20 is not equal cbw struct size 0x1f
  583. [      4.191]timer occur
  584. [      4.227]do_burn_from_boot usb : have no handshake
  585. In:    serial
  586. Out:   serial
  587. Err:   serial
  588. --------fastboot partitions--------
  589. -total partitions:11-
  590. -name-        -start-       -size-      
  591. bootloader  : 1000000       1000000    
  592. env         : 2000000       1000000    
  593. boot        : 3000000       1000000    
  594. system      : 4000000       60000000    
  595. misc        : 64000000      1000000    
  596. recovery    : 65000000      2000000    
  597. cache       : 67000000      30000000    
  598. metadata    : 97000000      1000000    
  599. private     : 98000000      1000000    
  600. alog        : 99000000      5000000    
  601. UDISK       : 9e000000      0          
  602. -----------------------------------
  603. base bootcmd=run setargs_nand boot_normal
  604. bootcmd set setargs_mmc
  605. key 0
  606. recovery key high 10, low 8
  607. cant find fstbt value
  608. misc partition found
  609. to be run cmd=run setargs_mmc boot_normal
  610.  
  611. ** Unable to use sunxi_flash 8:0 for fatload **
  612. load file(sn.txt) error
  613. serial is: 00000000000000000000
  614. mount part name bootloader
  615. cant open script.bin, maybe it is not exist
  616. WORK_MODE_BOOT
  617. board_status_probe
  618. [      4.329]pre sys mode
  619. sunxi_bmp_logo_display
  620. [      4.366][mmc]: blkcnt should not be 0
  621. [      4.385]fetch script data boot_disp.output_disp fail
  622. [      4.390]screen_id =1, screen_width =1280, screen_height =720
  623. [      4.395]frame buffer address 46400000
  624. [      4.399]Hit any key to stop autoboot:  0
  625. read boot or recovery all
  626. [      4.574]sunxi flash read :offset 3000000, 14556211 bytes OK
  627. [      4.586]ready to boot
  628. [      4.588][mmc]: mmc exit start
  629. [      4.601][mmc]: mmc 2 cmd 8 err 100
  630. [      4.606][mmc]: mmc send if cond failed
  631. [      4.610][mmc]: mmc 2 cmd 55 err 100
  632. [      4.615][mmc]: send app cmd failed
  633. [      4.627][mmc]: get sdc_phy_wipe fail.
  634. [      4.631][mmc]: get sdc0 sdc_erase fail.
  635. [      4.635][mmc]: get sdc_2xmode ok, val = 1
  636. [      4.639][mmc]: get sdc_ddrmode ok, val = 1
  637. [      4.643][mmc]: get sdc_f_max fail,use default  50000000Hz
  638. [      4.648][mmc]: get card_line ok, card_line = 8
  639. [      4.653][mmc]: get sdc_ex_dly_used fail,use default
  640. [      4.658][mmc]: mmc 2 exit ok
  641. [      4.661]
  642. Starting kernel ...
  643.  
  644. [sun8i_fixup]: From boot, get meminfo:
  645.         Start:  0x40000000
  646.         Size:   2048MB
  647. ion_carveout reserve: 96m 128m
  648. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  649. ion_cma reserve: 120m 176m 512m
  650. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  651. ------sun8i_smp_init_ops----37-----
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top