Guest User

Untitled

a guest
Aug 20th, 2011
142
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Initializing cgroup subsys cpuset
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Linux version 2.6.38-11-generic (buildd@rothera) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #48-Ubuntu SMP Fri Jul 29 19:05:14 UTC 2011 (Ubuntu 2.6.38-11.48-generic 2.6.38.8)
  4. [ 0.000000] BIOS-provided physical RAM map:
  5. [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  6. [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  7. [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  8. [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
  9. [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
  10. [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
  11. [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
  12. [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  13. [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  14. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
  15. [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
  16. [ 0.000000] DMI 2.4 present.
  17. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-ES2L/G31M-ES2L, BIOS FF 10/13/2009
  18. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  19. [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
  20. [ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
  21. [ 0.000000] MTRR default type: uncachable
  22. [ 0.000000] MTRR fixed ranges enabled:
  23. [ 0.000000] 00000-9FFFF write-back
  24. [ 0.000000] A0000-BFFFF uncachable
  25. [ 0.000000] C0000-CDFFF write-protect
  26. [ 0.000000] CE000-EFFFF uncachable
  27. [ 0.000000] F0000-FFFFF write-through
  28. [ 0.000000] MTRR variable ranges enabled:
  29. [ 0.000000] 0 base 000000000 mask F80000000 write-back
  30. [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
  31. [ 0.000000] 2 disabled
  32. [ 0.000000] 3 disabled
  33. [ 0.000000] 4 disabled
  34. [ 0.000000] 5 disabled
  35. [ 0.000000] 6 disabled
  36. [ 0.000000] 7 disabled
  37. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  38. [ 0.000000] found SMP MP-table at [c00f53c0] f53c0
  39. [ 0.000000] initial memory mapped : 0 - 01c00000
  40. [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  41. [ 0.000000] 0000000000 - 0000400000 page 4k
  42. [ 0.000000] 0000400000 - 0037400000 page 2M
  43. [ 0.000000] 0037400000 - 00377fe000 page 4k
  44. [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
  45. [ 0.000000] RAMDISK: 36768000 - 373ac000
  46. [ 0.000000] ACPI: RSDP 000f6db0 00014 (v00 GBT )
  47. [ 0.000000] ACPI: RSDT 7fee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  48. [ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  49. [ 0.000000] ACPI: DSDT 7fee3180 040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
  50. [ 0.000000] ACPI: FACS 7fee0000 00040
  51. [ 0.000000] ACPI: HPET 7fee73c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
  52. [ 0.000000] ACPI: MCFG 7fee7440 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  53. [ 0.000000] ACPI: TAMG 7fee7480 0625A (v01 GBT GBT B0 5455312E BG?? 00020101)
  54. [ 0.000000] ACPI: APIC 7fee72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
  55. [ 0.000000] ACPI: SSDT 7feedd40 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
  56. [ 0.000000] ACPI: Local APIC address 0xfee00000
  57. [ 0.000000] 1158MB HIGHMEM available.
  58. [ 0.000000] 887MB LOWMEM available.
  59. [ 0.000000] mapped low ram: 0 - 377fe000
  60. [ 0.000000] low ram: 0 - 377fe000
  61. [ 0.000000] Zone PFN ranges:
  62. [ 0.000000] DMA 0x00000010 -> 0x00001000
  63. [ 0.000000] Normal 0x00001000 -> 0x000377fe
  64. [ 0.000000] HighMem 0x000377fe -> 0x0007fee0
  65. [ 0.000000] Movable zone start PFN for each node
  66. [ 0.000000] early_node_map[2] active PFN ranges
  67. [ 0.000000] 0: 0x00000010 -> 0x0000009f
  68. [ 0.000000] 0: 0x00000100 -> 0x0007fee0
  69. [ 0.000000] On node 0 totalpages: 523887
  70. [ 0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map f5768200
  71. [ 0.000000] DMA zone: 32 pages used for memmap
  72. [ 0.000000] DMA zone: 0 pages reserved
  73. [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
  74. [ 0.000000] Normal zone: 1744 pages used for memmap
  75. [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
  76. [ 0.000000] HighMem zone: 2318 pages used for memmap
  77. [ 0.000000] HighMem zone: 294356 pages, LIFO batch:31
  78. [ 0.000000] Using APIC driver default
  79. [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  80. [ 0.000000] ACPI: Local APIC address 0xfee00000
  81. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  82. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  83. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
  84. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
  85. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
  86. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
  87. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
  88. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
  89. [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  90. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  91. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  92. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  93. [ 0.000000] ACPI: IRQ0 used by override.
  94. [ 0.000000] ACPI: IRQ2 used by override.
  95. [ 0.000000] ACPI: IRQ9 used by override.
  96. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  97. [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  98. [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
  99. [ 0.000000] nr_irqs_gsi: 40
  100. [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  101. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  102. [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  103. [ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:60100000)
  104. [ 0.000000] Booting paravirtualized kernel on bare hardware
  105. [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  106. [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5000000 s28800 r0 d24448 u1048576
  107. [ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304
  108. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  109. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519793
  110. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=f387ad42-16ea-48d8-9ee6-558eb9da4655 ro quiet splash vt.handoff=7
  111. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  112. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  113. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  114. [ 0.000000] Initializing CPU#0
  115. [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
  116. [ 0.000000] allocated 10479680 bytes of page_cgroup
  117. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  118. [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fee0)
  119. [ 0.000000] Memory: 2045948k/2096000k available (5190k kernel code, 49600k reserved, 2538k data, 700k init, 1186696k highmem)
  120. [ 0.000000] virtual kernel memory layout:
  121. [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
  122. [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
  123. [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
  124. [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
  125. [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
  126. [ 0.000000] .data : 0xc1511ba1 - 0xc178c500 (2538 kB)
  127. [ 0.000000] .text : 0xc1000000 - 0xc1511ba1 (5190 kB)
  128. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  129. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  130. [ 0.000000] Hierarchical RCU implementation.
  131. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  132. [ 0.000000] RCU-based detection of stalled CPUs is disabled.
  133. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
  134. [ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
  135. [ 0.000000] vt handoff: transparent VT on vt#7
  136. [ 0.000000] Console: colour dummy device 80x25
  137. [ 0.000000] console [tty0] enabled
  138. [ 0.000000] hpet clockevent registered
  139. [ 0.000000] Fast TSC calibration using PIT
  140. [ 0.000000] Detected 2933.045 MHz processor.
  141. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.09 BogoMIPS (lpj=11732180)
  142. [ 0.004007] pid_max: default: 32768 minimum: 301
  143. [ 0.004024] Security Framework initialized
  144. [ 0.004036] AppArmor: AppArmor initialized
  145. [ 0.004038] Yama: becoming mindful.
  146. [ 0.004081] Mount-cache hash table entries: 512
  147. [ 0.004188] Initializing cgroup subsys ns
  148. [ 0.004191] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  149. [ 0.004193] Initializing cgroup subsys cpuacct
  150. [ 0.004197] Initializing cgroup subsys memory
  151. [ 0.004203] Initializing cgroup subsys devices
  152. [ 0.004205] Initializing cgroup subsys freezer
  153. [ 0.004206] Initializing cgroup subsys net_cls
  154. [ 0.004208] Initializing cgroup subsys blkio
  155. [ 0.004236] CPU: Physical Processor ID: 0
  156. [ 0.004237] CPU: Processor Core ID: 0
  157. [ 0.004240] mce: CPU supports 6 MCE banks
  158. [ 0.004247] CPU0: Thermal monitoring enabled (TM2)
  159. [ 0.004250] using mwait in idle threads.
  160. [ 0.006206] ACPI: Core revision 20110112
  161. [ 0.010705] ftrace: allocating 23649 entries in 47 pages
  162. [ 0.012040] Enabling APIC mode: Flat. Using 1 I/O APICs
  163. [ 0.012337] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  164. [ 0.054699] CPU0: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz stepping 0a
  165. [ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
  166. [ 0.056003] ... version: 2
  167. [ 0.056003] ... bit width: 40
  168. [ 0.056003] ... generic registers: 2
  169. [ 0.056003] ... value mask: 000000ffffffffff
  170. [ 0.056003] ... max period: 000000007fffffff
  171. [ 0.056003] ... fixed-purpose events: 3
  172. [ 0.056003] ... event mask: 0000000700000003
  173. [ 0.056003] CPU 1 irqstacks, hard=f40ac000 soft=f40ae000
  174. [ 0.056003] Booting Node 0, Processors #1
  175. [ 0.008000] Initializing CPU#1
  176. [ 0.144021] Brought up 2 CPUs
  177. [ 0.144023] Total of 2 processors activated (11732.65 BogoMIPS).
  178. [ 0.145042] devtmpfs: initialized
  179. [ 0.145042] print_constraints: dummy:
  180. [ 0.145042] Time: 11:20:23 Date: 08/20/11
  181. [ 0.145042] NET: Registered protocol family 16
  182. [ 0.145042] Trying to unpack rootfs image as initramfs...
  183. [ 0.145042] EISA bus registered
  184. [ 0.145042] ACPI: bus type pci registered
  185. [ 0.145097] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  186. [ 0.145100] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  187. [ 0.145101] PCI: Using MMCONFIG for extended config space
  188. [ 0.145102] PCI: Using configuration type 1 for base access
  189. [ 0.160069] bio: create slab <bio-0> at 0
  190. [ 0.160758] ACPI: EC: Look up EC in DSDT
  191. [ 0.164093] ACPI Warning: Incorrect checksum in table [TAMG] - 0x1A, should be 0x19 (20110112/tbutils-314)
  192. [ 0.164237] ACPI: SSDT 7feed720 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
  193. [ 0.164396] ACPI: Dynamic OEM Table Load:
  194. [ 0.164398] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
  195. [ 0.164519] ACPI: SSDT 7feedbe0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
  196. [ 0.164669] ACPI: Dynamic OEM Table Load:
  197. [ 0.164672] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
  198. [ 0.164790] ACPI: Interpreter enabled
  199. [ 0.164798] ACPI: (supports S0 S3 S4 S5)
  200. [ 0.164814] ACPI: Using IOAPIC for interrupt routing
  201. [ 0.168214] ACPI: No dock devices found.
  202. [ 0.168216] HEST: Table not found.
  203. [ 0.168219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  204. [ 0.168261] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  205. [ 0.168349] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
  206. [ 0.168351] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
  207. [ 0.168353] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
  208. [ 0.168355] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
  209. [ 0.168357] pci_root PNP0A03:00: host bridge window [mem 0x7ff00000-0xfebfffff]
  210. [ 0.168368] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
  211. [ 0.168405] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
  212. [ 0.168431] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  213. [ 0.168433] pci 0000:00:01.0: PME# disabled
  214. [ 0.168469] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
  215. [ 0.168483] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
  216. [ 0.168530] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  217. [ 0.168533] pci 0000:00:1b.0: PME# disabled
  218. [ 0.168548] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
  219. [ 0.168595] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  220. [ 0.168598] pci 0000:00:1c.0: PME# disabled
  221. [ 0.168616] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
  222. [ 0.168664] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  223. [ 0.168667] pci 0000:00:1c.1: PME# disabled
  224. [ 0.168687] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
  225. [ 0.168721] pci 0000:00:1d.0: reg 20: [io 0xff00-0xff1f]
  226. [ 0.168746] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
  227. [ 0.168781] pci 0000:00:1d.1: reg 20: [io 0xfe00-0xfe1f]
  228. [ 0.168805] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
  229. [ 0.168840] pci 0000:00:1d.2: reg 20: [io 0xfd00-0xfd1f]
  230. [ 0.168864] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
  231. [ 0.168899] pci 0000:00:1d.3: reg 20: [io 0xfc00-0xfc1f]
  232. [ 0.168930] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
  233. [ 0.168945] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
  234. [ 0.169013] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
  235. [ 0.169061] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
  236. [ 0.169134] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
  237. [ 0.169137] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
  238. [ 0.169168] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
  239. [ 0.169180] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
  240. [ 0.169187] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
  241. [ 0.169194] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
  242. [ 0.169200] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
  243. [ 0.169207] pci 0000:00:1f.2: reg 20: [io 0xf900-0xf90f]
  244. [ 0.169231] pci 0000:00:1f.2: PME# supported from D3hot
  245. [ 0.169234] pci 0000:00:1f.2: PME# disabled
  246. [ 0.169244] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
  247. [ 0.169290] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
  248. [ 0.169348] pci 0000:01:00.0: [1002:68d9] type 0 class 0x000300
  249. [ 0.169360] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
  250. [ 0.169369] pci 0000:01:00.0: reg 18: [mem 0xfdcc0000-0xfdcdffff 64bit]
  251. [ 0.169376] pci 0000:01:00.0: reg 20: [io 0xae00-0xaeff]
  252. [ 0.169387] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
  253. [ 0.169402] pci 0000:01:00.0: supports D1 D2
  254. [ 0.169421] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
  255. [ 0.169433] pci 0000:01:00.1: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
  256. [ 0.169473] pci 0000:01:00.1: supports D1 D2
  257. [ 0.169500] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  258. [ 0.169503] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
  259. [ 0.169505] pci 0000:00:01.0: bridge window [mem 0xfdc00000-0xfdcfffff]
  260. [ 0.169509] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  261. [ 0.169542] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  262. [ 0.169546] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
  263. [ 0.169549] pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
  264. [ 0.169554] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
  265. [ 0.169603] pci 0000:03:00.0: [1969:1063] type 0 class 0x000200
  266. [ 0.169624] pci 0000:03:00.0: reg 10: [mem 0xfdec0000-0xfdefffff 64bit]
  267. [ 0.169635] pci 0000:03:00.0: reg 18: [io 0xbf00-0xbf7f]
  268. [ 0.169708] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  269. [ 0.169712] pci 0000:03:00.0: PME# disabled
  270. [ 0.176028] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  271. [ 0.176032] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
  272. [ 0.176036] pci 0000:00:1c.1: bridge window [mem 0xfde00000-0xfdefffff]
  273. [ 0.176041] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
  274. [ 0.176071] pci 0000:04:01.0: [10ec:8185] type 0 class 0x000200
  275. [ 0.176087] pci 0000:04:01.0: reg 10: [io 0xde00-0xdeff]
  276. [ 0.176096] pci 0000:04:01.0: reg 14: [mem 0xfdbff000-0xfdbff3ff]
  277. [ 0.176152] pci 0000:04:01.0: supports D1 D2
  278. [ 0.176154] pci 0000:04:01.0: PME# supported from D1 D2 D3hot D3cold
  279. [ 0.176158] pci 0000:04:01.0: PME# disabled
  280. [ 0.176197] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
  281. [ 0.176200] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
  282. [ 0.176203] pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
  283. [ 0.176208] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
  284. [ 0.176210] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  285. [ 0.176212] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  286. [ 0.176214] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  287. [ 0.176216] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
  288. [ 0.176218] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
  289. [ 0.176232] pci_bus 0000:00: on NUMA node 0
  290. [ 0.176236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  291. [ 0.176385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  292. [ 0.176422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
  293. [ 0.176465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  294. [ 0.176551] pci0000:00: Requesting ACPI _OSC control (0x1d)
  295. [ 0.182394] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
  296. [ 0.182435] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
  297. [ 0.182474] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
  298. [ 0.182513] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  299. [ 0.182554] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  300. [ 0.182594] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  301. [ 0.182633] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  302. [ 0.182672] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
  303. [ 0.182765] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  304. [ 0.182769] vgaarb: loaded
  305. [ 0.182936] SCSI subsystem initialized
  306. [ 0.182986] libata version 3.00 loaded.
  307. [ 0.183025] usbcore: registered new interface driver usbfs
  308. [ 0.183035] usbcore: registered new interface driver hub
  309. [ 0.183055] usbcore: registered new device driver usb
  310. [ 0.183143] wmi: Mapper loaded
  311. [ 0.183145] PCI: Using ACPI for IRQ routing
  312. [ 0.183147] PCI: pci_cache_line_size set to 64 bytes
  313. [ 0.183207] reserve RAM buffer: 000000000009f800 - 000000000009ffff
  314. [ 0.183209] reserve RAM buffer: 000000007fee0000 - 000000007fffffff
  315. [ 0.183294] NetLabel: Initializing
  316. [ 0.183295] NetLabel: domain hash size = 128
  317. [ 0.183296] NetLabel: protocols = UNLABELED CIPSOv4
  318. [ 0.183305] NetLabel: unlabeled traffic allowed by default
  319. [ 0.183332] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  320. [ 0.183336] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  321. [ 0.183340] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  322. [ 0.188074] Switching to clocksource hpet
  323. [ 0.191707] Switched to NOHz mode on CPU #0
  324. [ 0.191774] Switched to NOHz mode on CPU #1
  325. [ 0.194228] AppArmor: AppArmor Filesystem Enabled
  326. [ 0.194258] pnp: PnP ACPI init
  327. [ 0.194275] ACPI: bus type pnp registered
  328. [ 0.194358] pnp 00:00: [bus 00-ff]
  329. [ 0.194361] pnp 00:00: [io 0x0cf8-0x0cff]
  330. [ 0.194362] pnp 00:00: [io 0x0000-0x0cf7 window]
  331. [ 0.194364] pnp 00:00: [io 0x0d00-0xffff window]
  332. [ 0.194366] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  333. [ 0.194368] pnp 00:00: [mem 0x000c0000-0x000dffff window]
  334. [ 0.194369] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
  335. [ 0.194422] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
  336. [ 0.194474] pnp 00:01: [io 0x0010-0x001f]
  337. [ 0.194475] pnp 00:01: [io 0x0022-0x003f]
  338. [ 0.194477] pnp 00:01: [io 0x0044-0x005f]
  339. [ 0.194478] pnp 00:01: [io 0x0062-0x0063]
  340. [ 0.194480] pnp 00:01: [io 0x0065-0x006f]
  341. [ 0.194481] pnp 00:01: [io 0x0074-0x007f]
  342. [ 0.194483] pnp 00:01: [io 0x0091-0x0093]
  343. [ 0.194484] pnp 00:01: [io 0x00a2-0x00bf]
  344. [ 0.194485] pnp 00:01: [io 0x00e0-0x00ef]
  345. [ 0.194487] pnp 00:01: [io 0x04d0-0x04d1]
  346. [ 0.194488] pnp 00:01: [io 0x0290-0x029f]
  347. [ 0.194490] pnp 00:01: [io 0x0800-0x087f]
  348. [ 0.194491] pnp 00:01: [io 0x0290-0x0294]
  349. [ 0.194493] pnp 00:01: [io 0x0880-0x088f]
  350. [ 0.194555] system 00:01: [io 0x04d0-0x04d1] has been reserved
  351. [ 0.194557] system 00:01: [io 0x0290-0x029f] has been reserved
  352. [ 0.194559] system 00:01: [io 0x0800-0x087f] has been reserved
  353. [ 0.194561] system 00:01: [io 0x0290-0x0294] has been reserved
  354. [ 0.194563] system 00:01: [io 0x0880-0x088f] has been reserved
  355. [ 0.194566] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
  356. [ 0.194575] pnp 00:02: [dma 4]
  357. [ 0.194577] pnp 00:02: [io 0x0000-0x000f]
  358. [ 0.194578] pnp 00:02: [io 0x0080-0x0090]
  359. [ 0.194580] pnp 00:02: [io 0x0094-0x009f]
  360. [ 0.194581] pnp 00:02: [io 0x00c0-0x00df]
  361. [ 0.194604] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
  362. [ 0.194643] pnp 00:03: [irq 0 disabled]
  363. [ 0.194653] pnp 00:03: [irq 8]
  364. [ 0.194654] pnp 00:03: [mem 0xfed00000-0xfed003ff]
  365. [ 0.194679] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  366. [ 0.194699] pnp 00:04: [io 0x0070-0x0073]
  367. [ 0.194723] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
  368. [ 0.194730] pnp 00:05: [io 0x0061]
  369. [ 0.194758] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
  370. [ 0.194766] pnp 00:06: [io 0x00f0-0x00ff]
  371. [ 0.194770] pnp 00:06: [irq 13]
  372. [ 0.194794] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
  373. [ 0.194979] pnp 00:07: [io 0x03f8-0x03ff]
  374. [ 0.194983] pnp 00:07: [irq 4]
  375. [ 0.195030] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
  376. [ 0.195265] pnp 00:08: [io 0x0378-0x037f]
  377. [ 0.195267] pnp 00:08: [io 0x0778-0x077b]
  378. [ 0.195271] pnp 00:08: [irq 7]
  379. [ 0.195272] pnp 00:08: [dma 3]
  380. [ 0.195318] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
  381. [ 0.195366] pnp 00:09: [io 0x0400-0x04cf]
  382. [ 0.195404] system 00:09: [io 0x0400-0x04cf] has been reserved
  383. [ 0.195407] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
  384. [ 0.195558] pnp 00:0a: [mem 0xe0000000-0xefffffff]
  385. [ 0.195604] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
  386. [ 0.195607] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
  387. [ 0.195745] pnp 00:0b: [mem 0x000d1000-0x000d3fff]
  388. [ 0.195747] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
  389. [ 0.195749] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
  390. [ 0.195750] pnp 00:0b: [mem 0x000fc000-0x000fffff]
  391. [ 0.195752] pnp 00:0b: [mem 0x7fee0000-0x7fefffff]
  392. [ 0.195754] pnp 00:0b: [mem 0x00000000-0x0009ffff]
  393. [ 0.195755] pnp 00:0b: [mem 0x00100000-0x7fedffff]
  394. [ 0.195757] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
  395. [ 0.195758] pnp 00:0b: [mem 0xfed13000-0xfed1dfff]
  396. [ 0.195760] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
  397. [ 0.195761] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
  398. [ 0.195763] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
  399. [ 0.195765] pnp 00:0b: [mem 0xfff00000-0xffffffff]
  400. [ 0.195766] pnp 00:0b: [mem 0x000e0000-0x000effff]
  401. [ 0.195819] system 00:0b: [mem 0x000d1000-0x000d3fff] has been reserved
  402. [ 0.195821] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
  403. [ 0.195823] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
  404. [ 0.195825] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
  405. [ 0.195827] system 00:0b: [mem 0x7fee0000-0x7fefffff] could not be reserved
  406. [ 0.195829] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  407. [ 0.195831] system 00:0b: [mem 0x00100000-0x7fedffff] could not be reserved
  408. [ 0.195833] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
  409. [ 0.195835] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
  410. [ 0.195837] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
  411. [ 0.195839] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
  412. [ 0.195841] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
  413. [ 0.195843] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
  414. [ 0.195845] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
  415. [ 0.195848] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
  416. [ 0.195863] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
  417. [ 0.195897] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
  418. [ 0.195901] pnp: PnP ACPI: found 13 devices
  419. [ 0.195902] ACPI: ACPI bus type pnp unregistered
  420. [ 0.195906] PnPBIOS: Disabled by ACPI PNP
  421. [ 0.231910] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
  422. [ 0.231914] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  423. [ 0.231916] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
  424. [ 0.231919] pci 0000:00:01.0: bridge window [mem 0xfdc00000-0xfdcfffff]
  425. [ 0.231922] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
  426. [ 0.231925] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  427. [ 0.231927] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
  428. [ 0.231931] pci 0000:00:1c.0: bridge window [mem 0xfd900000-0xfd9fffff]
  429. [ 0.231935] pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
  430. [ 0.231940] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  431. [ 0.231942] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
  432. [ 0.231946] pci 0000:00:1c.1: bridge window [mem 0xfde00000-0xfdefffff]
  433. [ 0.231949] pci 0000:00:1c.1: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
  434. [ 0.231954] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
  435. [ 0.231956] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
  436. [ 0.231960] pci 0000:00:1e.0: bridge window [mem 0xfdb00000-0xfdbfffff]
  437. [ 0.231964] pci 0000:00:1e.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
  438. [ 0.231983] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  439. [ 0.231987] pci 0000:00:01.0: setting latency timer to 64
  440. [ 0.231993] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  441. [ 0.231996] pci 0000:00:1c.0: setting latency timer to 64
  442. [ 0.232013] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  443. [ 0.232016] pci 0000:00:1c.1: setting latency timer to 64
  444. [ 0.232022] pci 0000:00:1e.0: setting latency timer to 64
  445. [ 0.232025] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  446. [ 0.232027] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  447. [ 0.232028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  448. [ 0.232030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
  449. [ 0.232032] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
  450. [ 0.232034] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
  451. [ 0.232036] pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfdcfffff]
  452. [ 0.232037] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
  453. [ 0.232039] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
  454. [ 0.232041] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
  455. [ 0.232043] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
  456. [ 0.232045] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
  457. [ 0.232047] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
  458. [ 0.232048] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
  459. [ 0.232050] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
  460. [ 0.232052] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
  461. [ 0.232054] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
  462. [ 0.232055] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
  463. [ 0.232057] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
  464. [ 0.232059] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
  465. [ 0.232061] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
  466. [ 0.232062] pci_bus 0000:04: resource 8 [mem 0x7ff00000-0xfebfffff]
  467. [ 0.232095] NET: Registered protocol family 2
  468. [ 0.232157] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  469. [ 0.232343] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  470. [ 0.232748] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  471. [ 0.232959] TCP: Hash tables configured (established 131072 bind 65536)
  472. [ 0.232961] TCP reno registered
  473. [ 0.232963] UDP hash table entries: 512 (order: 2, 16384 bytes)
  474. [ 0.232970] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  475. [ 0.233045] NET: Registered protocol family 1
  476. [ 0.233145] pci 0000:01:00.0: Boot video device
  477. [ 0.233154] PCI: CLS 4 bytes, default 64
  478. [ 0.233329] cpufreq-nforce2: No nForce2 chipset.
  479. [ 0.233439] audit: initializing netlink socket (disabled)
  480. [ 0.233447] type=2000 audit(1313839223.228:1): initialized
  481. [ 0.240300] highmem bounce pool size: 64 pages
  482. [ 0.240304] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  483. [ 0.241735] VFS: Disk quotas dquot_6.5.2
  484. [ 0.241782] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  485. [ 0.242312] fuse init (API version 7.16)
  486. [ 0.242385] msgmni has been set to 1678
  487. [ 0.242568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  488. [ 0.242587] io scheduler noop registered
  489. [ 0.242589] io scheduler deadline registered
  490. [ 0.242600] io scheduler cfq registered (default)
  491. [ 0.242691] pcieport 0000:00:01.0: setting latency timer to 64
  492. [ 0.242718] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
  493. [ 0.242757] pcieport 0000:00:1c.0: setting latency timer to 64
  494. [ 0.242789] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
  495. [ 0.242840] pcieport 0000:00:1c.1: setting latency timer to 64
  496. [ 0.242870] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
  497. [ 0.242937] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  498. [ 0.242955] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  499. [ 0.243022] intel_idle: MWAIT substates: 0x22220
  500. [ 0.243024] intel_idle: does not run on family 6 model 23
  501. [ 0.243097] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  502. [ 0.243101] ACPI: Power Button [PWRB]
  503. [ 0.243146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  504. [ 0.243149] ACPI: Power Button [PWRF]
  505. [ 0.243287] ACPI: acpi_idle registered with cpuidle
  506. [ 0.244520] ERST: Table is not found!
  507. [ 0.244568] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  508. [ 0.264897] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  509. [ 0.265047] isapnp: Scanning for PnP cards...
  510. [ 0.357035] Freeing initrd memory: 12560k freed
  511. [ 0.617936] isapnp: No Plug & Play device found
  512. [ 0.641611] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  513. [ 0.641911] Linux agpgart interface v0.103
  514. [ 0.643045] brd: module loaded
  515. [ 0.643530] loop: module loaded
  516. [ 0.643597] i2c-core: driver [adp5520] using legacy suspend method
  517. [ 0.643599] i2c-core: driver [adp5520] using legacy resume method
  518. [ 0.643686] ata_piix 0000:00:1f.2: version 2.13
  519. [ 0.643709] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  520. [ 0.643713] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  521. [ 0.643744] ata_piix 0000:00:1f.2: setting latency timer to 64
  522. [ 0.644017] scsi0 : ata_piix
  523. [ 0.644090] scsi1 : ata_piix
  524. [ 0.644504] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
  525. [ 0.644506] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
  526. [ 0.644796] Fixed MDIO Bus: probed
  527. [ 0.644826] PPP generic driver version 2.4.2
  528. [ 0.644859] tun: Universal TUN/TAP device driver, 1.6
  529. [ 0.644860] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  530. [ 0.644925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  531. [ 0.644941] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  532. [ 0.644950] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  533. [ 0.644953] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  534. [ 0.644983] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  535. [ 0.645078] ehci_hcd 0000:00:1d.7: using broken periodic workaround
  536. [ 0.648962] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported
  537. [ 0.648974] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
  538. [ 0.664015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  539. [ 0.664192] hub 1-0:1.0: USB hub found
  540. [ 0.664202] hub 1-0:1.0: 8 ports detected
  541. [ 0.664272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  542. [ 0.664282] uhci_hcd: USB Universal Host Controller Interface driver
  543. [ 0.664299] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  544. [ 0.664304] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  545. [ 0.664306] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  546. [ 0.664336] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  547. [ 0.668039] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
  548. [ 0.668206] hub 2-0:1.0: USB hub found
  549. [ 0.668209] hub 2-0:1.0: 2 ports detected
  550. [ 0.668263] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  551. [ 0.668267] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  552. [ 0.668270] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  553. [ 0.668296] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  554. [ 0.668333] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
  555. [ 0.668427] hub 3-0:1.0: USB hub found
  556. [ 0.668430] hub 3-0:1.0: 2 ports detected
  557. [ 0.668483] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  558. [ 0.668488] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  559. [ 0.668490] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  560. [ 0.668519] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  561. [ 0.668557] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
  562. [ 0.668658] hub 4-0:1.0: USB hub found
  563. [ 0.668661] hub 4-0:1.0: 2 ports detected
  564. [ 0.668712] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  565. [ 0.668716] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  566. [ 0.668719] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  567. [ 0.668750] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  568. [ 0.668786] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
  569. [ 0.668879] hub 5-0:1.0: USB hub found
  570. [ 0.668881] hub 5-0:1.0: 2 ports detected
  571. [ 0.668980] i8042: PNP: No PS/2 controller found. Probing ports directly.
  572. [ 0.702061] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
  573. [ 0.702062] i8042: If AUX port is really absent please use the 'i8042.noaux' option
  574. [ 0.800238] ata2.01: NODEV after polling detection
  575. [ 0.808238] ata2.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
  576. [ 0.808315] ata1.00: HPA detected: current 976771055, native 976773168
  577. [ 0.808318] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
  578. [ 0.808320] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
  579. [ 0.824236] ata2.00: configured for UDMA/100
  580. [ 0.824377] ata1.00: configured for UDMA/133
  581. [ 0.824523] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
  582. [ 0.824707] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
  583. [ 0.824715] sd 0:0:0:0: Attached scsi generic sg0 type 0
  584. [ 0.824747] sd 0:0:0:0: [sda] Write Protect is off
  585. [ 0.824749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  586. [ 0.824766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  587. [ 0.826052] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
  588. [ 0.828367] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  589. [ 0.828370] cdrom: Uniform CD-ROM driver Revision: 3.20
  590. [ 0.828504] sr 1:0:0:0: Attached scsi CD-ROM sr0
  591. [ 0.828576] sr 1:0:0:0: Attached scsi generic sg1 type 5
  592. [ 0.871399] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
  593. [ 0.871521] sda: p6 size 4984832 extends beyond EOD, enabling native capacity
  594. [ 0.871531] ata1: soft resetting link
  595. [ 0.952093] serio: i8042 KBD port at 0x60,0x64 irq 1
  596. [ 0.952191] mousedev: PS/2 mouse device common for all mice
  597. [ 0.952292] rtc_cmos 00:04: RTC can wake from S4
  598. [ 0.956075] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  599. [ 0.956100] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
  600. [ 0.956208] device-mapper: uevent: version 1.0.3
  601. [ 0.956271] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
  602. [ 0.956313] device-mapper: multipath: version 1.2.0 loaded
  603. [ 0.956315] device-mapper: multipath round-robin: version 1.0.0 loaded
  604. [ 0.956372] EISA: Probing bus 0 at eisa.0
  605. [ 0.956374] EISA: Cannot allocate resource for mainboard
  606. [ 0.956376] Cannot allocate resource for EISA slot 1
  607. [ 0.956377] Cannot allocate resource for EISA slot 2
  608. [ 0.956379] Cannot allocate resource for EISA slot 3
  609. [ 0.956380] Cannot allocate resource for EISA slot 4
  610. [ 0.956381] Cannot allocate resource for EISA slot 5
  611. [ 0.956382] Cannot allocate resource for EISA slot 6
  612. [ 0.956384] Cannot allocate resource for EISA slot 7
  613. [ 0.956385] Cannot allocate resource for EISA slot 8
  614. [ 0.956386] EISA: Detected 0 cards.
  615. [ 0.956424] cpuidle: using governor ladder
  616. [ 0.956426] cpuidle: using governor menu
  617. [ 0.956644] TCP cubic registered
  618. [ 0.956744] NET: Registered protocol family 10
  619. [ 0.957199] NET: Registered protocol family 17
  620. [ 0.957212] Registering the dns_resolver key type
  621. [ 0.958811] Using IPI No-Shortcut mode
  622. [ 0.958926] PM: Hibernation image not present or could not be loaded.
  623. [ 0.958937] registered taskstats version 1
  624. [ 0.959124] Magic number: 7:950:327
  625. [ 0.959195] rtc_cmos 00:04: setting system clock to 2011-08-20 11:20:24 UTC (1313839224)
  626. [ 0.959197] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  627. [ 0.959198] EDD information not available.
  628. [ 0.976026] usb 1-3: new high speed USB device using ehci_hcd and address 2
  629. [ 1.056126] ata1.00: n_sectors mismatch 976771055 != 976773168
  630. [ 1.056129] ata1.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
  631. [ 1.072319] ata1.00: configured for UDMA/133
  632. [ 1.072325] ata1: EH complete
  633. [ 1.072388] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  634. [ 1.072748] sda: detected capacity change from 500106780160 to 500107862016
  635. [ 1.129488] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
  636. [ 1.129867] sd 0:0:0:0: [sda] Attached SCSI disk
  637. [ 1.129895] Freeing unused kernel memory: 700k freed
  638. [ 1.130047] Write protecting the kernel text: 5192k
  639. [ 1.130081] Write protecting the kernel read-only data: 2148k
  640. [ 1.144558] <30>udev[70]: starting version 167
  641. [ 1.206109] atl1c 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  642. [ 1.206118] atl1c 0000:03:00.0: setting latency timer to 64
  643. [ 1.232034] Refined TSC clocksource calibration: 2933.332 MHz.
  644. [ 1.232039] Switching to clocksource tsc
  645. [ 1.236569] usbcore: registered new interface driver uas
  646. [ 1.240329] Initializing USB Mass Storage driver...
  647. [ 1.240425] scsi2 : usb-storage 1-3:1.0
  648. [ 1.240500] usbcore: registered new interface driver usb-storage
  649. [ 1.240502] USB Mass Storage support registered.
  650. [ 1.312592] atl1c 0000:03:00.0: version 1.0.1.0-NAPI
  651. [ 1.332017] usb 1-6: new high speed USB device using ehci_hcd and address 4
  652. [ 1.465595] usb-storage 1-6:1.0: Quirks match for vid 152d pid 2329: 8020
  653. [ 1.465611] scsi3 : usb-storage 1-6:1.0
  654. [ 1.595456] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
  655. [ 1.595459] EXT4-fs (sda5): write access will be enabled during recovery
  656. [ 1.816025] usb 4-1: new full speed USB device using uhci_hcd and address 2
  657. [ 2.240802] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
  658. [ 2.241308] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
  659. [ 2.241805] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
  660. [ 2.242305] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
  661. [ 2.242790] sd 2:0:0:0: Attached scsi generic sg2 type 0
  662. [ 2.243525] sd 2:0:0:1: Attached scsi generic sg3 type 0
  663. [ 2.243775] sd 2:0:0:2: Attached scsi generic sg4 type 0
  664. [ 2.243909] sd 2:0:0:3: Attached scsi generic sg5 type 0
  665. [ 2.244118] usb 5-1: new low speed USB device using uhci_hcd and address 2
  666. [ 2.249161] sd 2:0:0:1: [sdc] Attached SCSI removable disk
  667. [ 2.250782] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  668. [ 2.252033] sd 2:0:0:2: [sdd] Attached SCSI removable disk
  669. [ 2.255156] sd 2:0:0:3: [sde] Attached SCSI removable disk
  670. [ 2.315100] EXT4-fs (sda5): orphan cleanup on readonly fs
  671. [ 2.315107] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1704026
  672. [ 2.315127] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1704024
  673. [ 2.315133] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1704013
  674. [ 2.315160] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1703994
  675. [ 2.315171] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1703985
  676. [ 2.315181] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1703976
  677. [ 2.315192] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1703970
  678. [ 2.315202] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 1703952
  679. [ 2.315211] EXT4-fs (sda5): 8 orphan inodes deleted
  680. [ 2.315212] EXT4-fs (sda5): recovery complete
  681. [ 2.454301] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input2
  682. [ 2.454393] generic-usb 0003:046D:C069.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.3-1/input0
  683. [ 2.454404] usbcore: registered new interface driver usbhid
  684. [ 2.454406] usbhid: USB HID core driver
  685. [ 2.506187] scsi 3:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS
  686. [ 2.506591] sd 3:0:0:0: Attached scsi generic sg6 type 0
  687. [ 2.507034] sd 3:0:0:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  688. [ 2.507787] sd 3:0:0:0: [sdf] Write Protect is off
  689. [ 2.507792] sd 3:0:0:0: [sdf] Mode Sense: 28 00 00 00
  690. [ 2.507795] sd 3:0:0:0: [sdf] Assuming drive cache: write through
  691. [ 2.509410] sd 3:0:0:0: [sdf] Assuming drive cache: write through
  692. [ 2.543235] sdf: sdf1
  693. [ 2.544907] sd 3:0:0:0: [sdf] Assuming drive cache: write through
  694. [ 2.544910] sd 3:0:0:0: [sdf] Attached SCSI disk
  695. [ 2.608824] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
  696. [ 2.668016] usb 5-2: new low speed USB device using uhci_hcd and address 3
  697. [ 2.867292] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input3
  698. [ 2.867351] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.3-2/input0
  699. [ 2.889994] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input4
  700. [ 2.890057] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.3-2/input1
  701. [ 9.946644] Adding 2492412k swap on /dev/sda6. Priority:-1 extents:1 across:2492412k
  702. [ 9.985367] <30>udev[467]: starting version 167
  703. [ 10.223724] type=1400 audit(1313824833.760:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=545 comm="apparmor_parser"
  704. [ 10.224446] type=1400 audit(1313824833.764:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=545 comm="apparmor_parser"
  705. [ 10.224912] type=1400 audit(1313824833.764:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=545 comm="apparmor_parser"
  706. [ 10.226147] type=1400 audit(1313824833.764:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=654 comm="apparmor_parser"
  707. [ 10.226790] type=1400 audit(1313824833.764:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=654 comm="apparmor_parser"
  708. [ 10.227197] type=1400 audit(1313824833.764:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=654 comm="apparmor_parser"
  709. [ 10.228597] lp: driver loaded but no devices found
  710. [ 10.275661] intel_rng: FWH not detected
  711. [ 10.292318] parport_pc 00:08: reported by Plug and Play ACPI
  712. [ 10.292373] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
  713. [ 10.314396] leds_ss4200: no LED devices found
  714. [ 10.324439] ppdev: user-space parallel port driver
  715. [ 10.350794] Linux video capture interface: v2.00
  716. [ 10.383538] gspca: v2.12.0 registered
  717. [ 10.388796] gspca: probing 046d:08da
  718. [ 10.388860] lp0: using parport0 (interrupt-driven).
  719. [ 10.482403] cfg80211: Calling CRDA to update world regulatory domain
  720. [ 10.571524] cfg80211: World regulatory domain updated:
  721. [ 10.571527] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  722. [ 10.571529] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  723. [ 10.571531] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  724. [ 10.571533] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  725. [ 10.571535] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  726. [ 10.571537] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  727. [ 10.662174] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  728. [ 10.662219] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
  729. [ 10.662239] HDA Intel 0000:00:1b.0: setting latency timer to 64
  730. [ 10.739340] rtl8180 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  731. [ 10.747668] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
  732. [ 10.747671] Disabling lock debugging due to kernel taint
  733. [ 10.839221] [fglrx] Maximum main memory to use for locked dma buffers: 1883 MBytes.
  734. [ 10.839321] [fglrx] vendor: 1002 device: 68d9 count: 1
  735. [ 10.839746] [fglrx] ioport: bar 4, base 0xae00, size: 0x100
  736. [ 10.839757] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  737. [ 10.839761] pci 0000:01:00.0: setting latency timer to 64
  738. [ 10.840116] [fglrx] Kernel PAT support is enabled
  739. [ 10.840131] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
  740. [ 10.859611] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
  741. [ 10.859613] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  742. [ 10.859615] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
  743. [ 10.859617] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  744. [ 10.859619] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
  745. [ 10.859621] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  746. [ 10.859623] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
  747. [ 10.859624] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  748. [ 10.859626] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
  749. [ 10.859628] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  750. [ 10.859630] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
  751. [ 10.859632] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  752. [ 10.859633] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
  753. [ 10.859635] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  754. [ 10.859637] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
  755. [ 10.859639] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  756. [ 10.859641] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
  757. [ 10.859643] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  758. [ 10.859644] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
  759. [ 10.859646] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  760. [ 10.859648] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
  761. [ 10.859650] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
  762. [ 10.859651] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
  763. [ 10.859653] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
  764. [ 10.859655] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
  765. [ 10.859657] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
  766. [ 10.859659] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
  767. [ 10.859661] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
  768. [ 10.878922] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  769. [ 10.878977] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
  770. [ 10.878997] HDA Intel 0000:01:00.1: setting latency timer to 64
  771. [ 10.892077] hda-intel: Enable sync_write for AMD chipset
  772. [ 10.945002] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
  773. [ 11.022398] type=1400 audit(1313824834.560:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=922 comm="apparmor_parser"
  774. [ 11.023616] type=1400 audit(1313824834.560:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=923 comm="apparmor_parser"
  775. [ 11.024295] type=1400 audit(1313824834.564:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=923 comm="apparmor_parser"
  776. [ 11.024705] type=1400 audit(1313824834.564:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=923 comm="apparmor_parser"
  777. [ 11.086791] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  778. [ 11.087282] ieee80211 phy0: hwaddr 0014d15887cf, RTL8185vD + rtl8225z2
  779. [ 11.110981] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  780. [ 11.111073] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  781. [ 11.443592] zc3xx: probe 2wr ov vga 0x0000
  782. [ 11.479592] zc3xx: probe sensor -> 0011
  783. [ 11.479594] zc3xx: Find Sensor HV7131R
  784. [ 11.481680] input: zc3xx as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/input/input5
  785. [ 11.481854] gspca: video0 created
  786. [ 11.481908] usbcore: registered new interface driver zc3xx
  787. [ 11.591826] usbcore: registered new interface driver snd-usb-audio
  788. [ 15.324223] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  789. [ 15.378164] audit_printk_skb: 18 callbacks suppressed
  790. [ 15.378167] type=1400 audit(1313824838.916:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1134 comm="apparmor_parser"
  791. [ 15.378925] type=1400 audit(1313824838.916:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1134 comm="apparmor_parser"
  792. [ 15.391196] vesafb: framebuffer at 0xd0000000, mapped to 0xfa080000, using 5824k, total 5824k
  793. [ 15.391199] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
  794. [ 15.391201] vesafb: scrolling: redraw
  795. [ 15.391202] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
  796. [ 15.391375] Console: switching to colour frame buffer device 175x65
  797. [ 15.391404] fb0: VESA VGA frame buffer device
  798. [ 15.778113] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
  799. [ 15.778791] [fglrx] Firegl kernel thread PID: 1308
  800. [ 15.778842] [fglrx] Firegl kernel thread PID: 1309
  801. [ 15.778888] [fglrx] Firegl kernel thread PID: 1310
  802. [ 15.779088] [fglrx] IRQ 46 Enabled
  803. [ 16.125312] [fglrx] Gart USWC size:628 M.
  804. [ 16.125315] [fglrx] Gart cacheable size:247 M.
  805. [ 16.125319] [fglrx] Reserved FB block: Shared offset:0, size:1000000
  806. [ 16.125321] [fglrx] Reserved FB block: Unshared offset:fb07000, size:1f9000
  807. [ 16.125322] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
  808. [ 16.242242] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
  809. [ 17.780061] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
  810. [ 18.022194] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
  811. [ 21.408006] eth0: no IPv6 routers present
  812. [ 461.596895] exe (2295): /proc/2295/oom_adj is deprecated, please use /proc/2295/oom_score_adj instead.
  813. [ 682.016009] ------------[ cut here ]------------
  814. [ 682.016020] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x213/0x220()
  815. [ 682.016023] Hardware name: G31M-ES2L
  816. [ 682.016026] NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
  817. [ 682.016028] Modules linked in: binfmt_misc vesafb snd_usb_audio snd_usbmidi_lib arc4 snd_hda_codec_hdmi snd_hda_codec_realtek fglrx(P) rtl8180 snd_seq_midi snd_rawmidi snd_hda_intel snd_seq_midi_event snd_seq snd_hda_codec snd_hwdep snd_seq_device snd_pcm snd_timer mac80211 eeprom_93cx6 cfg80211 snd soundcore gspca_zc3xx gspca_main videodev ppdev snd_page_alloc parport_pc joydev lp serio_raw parport usbhid hid usb_storage uas atl1c
  818. [ 682.016073] Pid: 0, comm: swapper Tainted: P 2.6.38-11-generic #48-Ubuntu
  819. [ 682.016075] Call Trace:
  820. [ 682.016082] [<c104f9b2>] ? warn_slowpath_common+0x72/0xa0
  821. [ 682.016087] [<c144a913>] ? dev_watchdog+0x213/0x220
  822. [ 682.016092] [<c144a913>] ? dev_watchdog+0x213/0x220
  823. [ 682.016096] [<c104fa83>] ? warn_slowpath_fmt+0x33/0x40
  824. [ 682.016100] [<c144a913>] ? dev_watchdog+0x213/0x220
  825. [ 682.016106] [<c10406b5>] ? reweight_entity+0x125/0x130
  826. [ 682.016111] [<c105c89b>] ? call_timer_fn+0x2b/0xe0
  827. [ 682.016116] [<c144a700>] ? dev_watchdog+0x0/0x220
  828. [ 682.016120] [<c105dbd9>] ? run_timer_softirq+0xe9/0x1e0
  829. [ 682.016124] [<c144a700>] ? dev_watchdog+0x0/0x220
  830. [ 682.016128] [<c10566c2>] ? __do_softirq+0x82/0x170
  831. [ 682.016132] [<c1056640>] ? __do_softirq+0x0/0x170
  832. [ 682.016134] <IRQ> [<c105688d>] ? irq_exit+0x6d/0x80
  833. [ 682.016142] [<c151117b>] ? smp_apic_timer_interrupt+0x5b/0x8a
  834. [ 682.016147] [<c10b4e87>] ? rcu_needs_cpu+0x47/0x1e0
  835. [ 682.016151] [<c150a979>] ? apic_timer_interrupt+0x31/0x38
  836. [ 682.016158] [<c100a453>] ? mwait_idle+0x73/0x100
  837. [ 682.016162] [<c10019ca>] ? cpu_idle+0x8a/0xc0
  838. [ 682.016166] [<c1038dde>] ? complete+0x4e/0x60
  839. [ 682.016171] [<c14f157d>] ? rest_init+0x5d/0x70
  840. [ 682.016176] [<c178d7e1>] ? start_kernel+0x35f/0x366
  841. [ 682.016180] [<c178d3d5>] ? pass_all_bootoptions+0x0/0xa
  842. [ 682.016185] [<c178d0e0>] ? i386_start_kernel+0xe0/0xe8
  843. [ 682.016188] ---[ end trace 9ad20148d79ca085 ]---
  844. [ 682.040857] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  845. [ 682.040928] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  846. [ 1493.970056] ipv4: Neighbour table overflow.
  847. [ 1493.970277] ipv4: Neighbour table overflow.
  848. [ 1493.970452] ipv4: Neighbour table overflow.
  849. [ 1493.970625] ipv4: Neighbour table overflow.
  850. [ 1493.970798] ipv4: Neighbour table overflow.
  851. [ 1493.970970] ipv4: Neighbour table overflow.
  852. [ 1494.470379] ipv4: Neighbour table overflow.
  853. [ 1494.470581] ipv4: Neighbour table overflow.
  854. [ 1494.470754] ipv4: Neighbour table overflow.
  855. [ 1494.470927] ipv4: Neighbour table overflow.
  856. [ 1498.976597] net_ratelimit: 49 callbacks suppressed
  857. [ 1498.976601] ipv4: Neighbour table overflow.
  858. [ 1498.976801] ipv4: Neighbour table overflow.
  859. [ 1498.976975] ipv4: Neighbour table overflow.
  860. [ 1498.977149] ipv4: Neighbour table overflow.
  861. [ 1498.977331] ipv4: Neighbour table overflow.
  862. [ 1498.977505] ipv4: Neighbour table overflow.
  863. [ 1499.477849] ipv4: Neighbour table overflow.
  864. [ 1499.478050] ipv4: Neighbour table overflow.
  865. [ 1499.478224] ipv4: Neighbour table overflow.
  866. [ 1499.478397] ipv4: Neighbour table overflow.
  867. [ 1503.987467] net_ratelimit: 48 callbacks suppressed
  868. [ 1503.987471] ipv4: Neighbour table overflow.
  869. [ 1503.987669] ipv4: Neighbour table overflow.
  870. [ 1503.987912] ipv4: Neighbour table overflow.
  871. [ 1503.988132] ipv4: Neighbour table overflow.
  872. [ 1503.988317] ipv4: Neighbour table overflow.
  873. [ 1507.451550] ipv4: Neighbour table overflow.
  874. [ 1507.474612] ipv4: Neighbour table overflow.
  875. [ 1507.474815] ipv4: Neighbour table overflow.
  876. [ 1507.474990] ipv4: Neighbour table overflow.
  877. [ 1507.475161] ipv4: Neighbour table overflow.
  878. [ 1509.477084] net_ratelimit: 20 callbacks suppressed
  879. [ 1509.477089] ipv4: Neighbour table overflow.
  880. [ 1509.477294] ipv4: Neighbour table overflow.
  881. [ 1509.477466] ipv4: Neighbour table overflow.
  882. [ 1509.477637] ipv4: Neighbour table overflow.
  883. [ 1509.477809] ipv4: Neighbour table overflow.
  884. [ 1509.477983] ipv4: Neighbour table overflow.
  885. [ 1509.978621] ipv4: Neighbour table overflow.
  886. [ 1509.978828] ipv4: Neighbour table overflow.
  887. [ 1509.979001] ipv4: Neighbour table overflow.
  888. [ 1509.979173] ipv4: Neighbour table overflow.
  889. [ 1514.483300] net_ratelimit: 48 callbacks suppressed
  890. [ 1514.483304] ipv4: Neighbour table overflow.
  891. [ 1514.483512] ipv4: Neighbour table overflow.
  892. [ 1514.483690] ipv4: Neighbour table overflow.
  893. [ 1514.483864] ipv4: Neighbour table overflow.
  894. [ 1514.484054] ipv4: Neighbour table overflow.
  895. [ 1514.484327] ipv4: Neighbour table overflow.
  896. [ 1514.985174] ipv4: Neighbour table overflow.
  897. [ 1514.985378] ipv4: Neighbour table overflow.
  898. [ 1514.985552] ipv4: Neighbour table overflow.
  899. [ 1514.985725] ipv4: Neighbour table overflow.
  900. [ 1519.604260] net_ratelimit: 44 callbacks suppressed
  901. [ 1519.604264] ipv4: Neighbour table overflow.
  902. [ 1519.604466] ipv4: Neighbour table overflow.
  903. [ 1519.604640] ipv4: Neighbour table overflow.
  904. [ 1519.604812] ipv4: Neighbour table overflow.
  905. [ 1519.604984] ipv4: Neighbour table overflow.
  906. [ 1519.605157] ipv4: Neighbour table overflow.
  907. [ 1520.104419] ipv4: Neighbour table overflow.
  908. [ 1520.104624] ipv4: Neighbour table overflow.
  909. [ 1520.104797] ipv4: Neighbour table overflow.
  910. [ 1520.104969] ipv4: Neighbour table overflow.
  911. [ 1524.614971] net_ratelimit: 49 callbacks suppressed
  912. [ 1524.614975] ipv4: Neighbour table overflow.
  913. [ 1524.615175] ipv4: Neighbour table overflow.
  914. [ 1524.615348] ipv4: Neighbour table overflow.
  915. [ 1524.615521] ipv4: Neighbour table overflow.
  916. [ 1524.615693] ipv4: Neighbour table overflow.
  917. [ 1524.615865] ipv4: Neighbour table overflow.
  918. [ 1525.115293] ipv4: Neighbour table overflow.
  919. [ 1525.115496] ipv4: Neighbour table overflow.
  920. [ 1525.115672] ipv4: Neighbour table overflow.
  921. [ 1525.115845] ipv4: Neighbour table overflow.
  922. [ 1532.486894] net_ratelimit: 26 callbacks suppressed
  923. [ 1532.486898] ipv4: Neighbour table overflow.
  924. [ 1532.487101] ipv4: Neighbour table overflow.
  925. [ 1532.487275] ipv4: Neighbour table overflow.
  926. [ 1532.487447] ipv4: Neighbour table overflow.
  927. [ 1532.487620] ipv4: Neighbour table overflow.
  928. [ 1532.487793] ipv4: Neighbour table overflow.
  929. [ 1532.990727] ipv4: Neighbour table overflow.
  930. [ 1532.993904] ipv4: Neighbour table overflow.
  931. [ 1532.994081] ipv4: Neighbour table overflow.
  932. [ 1532.994254] ipv4: Neighbour table overflow.
  933. [ 1537.492486] net_ratelimit: 6 callbacks suppressed
  934. [ 1537.492490] ipv4: Neighbour table overflow.
  935. [ 1537.492691] ipv4: Neighbour table overflow.
  936. [ 1537.492865] ipv4: Neighbour table overflow.
  937. [ 1537.493037] ipv4: Neighbour table overflow.
  938. [ 1537.493209] ipv4: Neighbour table overflow.
  939. [ 1537.493380] ipv4: Neighbour table overflow.
  940. [ 1537.993071] ipv4: Neighbour table overflow.
  941. [ 1537.993294] ipv4: Neighbour table overflow.
  942. [ 1537.993469] ipv4: Neighbour table overflow.
  943. [ 1537.993642] ipv4: Neighbour table overflow.
  944. [ 1542.500372] net_ratelimit: 50 callbacks suppressed
  945. [ 1542.500376] ipv4: Neighbour table overflow.
  946. [ 1542.500575] ipv4: Neighbour table overflow.
  947. [ 1542.500748] ipv4: Neighbour table overflow.
  948. [ 1542.500922] ipv4: Neighbour table overflow.
  949. [ 1542.501093] ipv4: Neighbour table overflow.
  950. [ 1542.501265] ipv4: Neighbour table overflow.
  951. [ 1543.001378] ipv4: Neighbour table overflow.
  952. [ 1543.001579] ipv4: Neighbour table overflow.
  953. [ 1543.001753] ipv4: Neighbour table overflow.
  954. [ 1543.001926] ipv4: Neighbour table overflow.
  955. [ 1548.512372] net_ratelimit: 19 callbacks suppressed
  956. [ 1548.512377] ipv4: Neighbour table overflow.
  957. [ 1548.512574] ipv4: Neighbour table overflow.
  958. [ 1548.512782] ipv4: Neighbour table overflow.
  959. [ 1548.516147] ipv4: Neighbour table overflow.
  960. [ 1548.516606] ipv4: Neighbour table overflow.
  961. [ 1549.012604] ipv4: Neighbour table overflow.
  962. [ 1549.012818] ipv4: Neighbour table overflow.
  963. [ 1549.013000] ipv4: Neighbour table overflow.
  964. [ 1549.013181] ipv4: Neighbour table overflow.
  965. [ 1549.013362] ipv4: Neighbour table overflow.
  966. [ 1574.529862] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  967. [ 1574.529944] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  968. [ 1585.232010] eth0: no IPv6 routers present
  969. [ 1870.040875] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  970. [ 1870.040947] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  971. [ 2095.513735] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  972. [ 2095.513806] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  973. [ 2106.432009] eth0: no IPv6 routers present
  974. [ 2496.040847] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  975. [ 2496.040919] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  976. [ 2937.388272] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  977. [ 3206.182856] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  978. [ 3206.182928] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  979. [ 3210.092252] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  980. [ 3216.936008] eth0: no IPv6 routers present
  981. [ 3440.024967] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  982. [ 3440.025040] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  983. [ 3451.576274] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  984. [ 3500.892922] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  985. [ 3500.893000] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  986. [ 3504.804259] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  987. [ 3511.152011] eth0: no IPv6 routers present
  988. [ 3920.024865] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  989. [ 3920.024936] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  990. [ 4053.161005] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  991. [ 4053.161076] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  992. [ 4057.072246] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  993. [ 4063.840009] eth0: no IPv6 routers present
  994. [ 4402.040918] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  995. [ 4402.040989] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  996. [ 4551.209715] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  997. [ 4551.209788] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  998. [ 4561.376009] eth0: no IPv6 routers present
  999. [ 4811.811199] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1000. [ 4811.811273] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1001. [ 4811.862173] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1002. [ 4811.862244] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1003. [ 4822.560010] eth0: no IPv6 routers present
  1004. [ 5103.032870] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1005. [ 5103.032942] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1006. [ 5128.598304] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1007. [ 5128.598378] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1008. [ 5128.650109] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1009. [ 5128.650180] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1010. [ 5139.184008] eth0: no IPv6 routers present
  1011. [ 5240.024743] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1012. [ 5240.024806] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1013. [ 5252.125938] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1014. [ 5252.126006] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1015. [ 5252.169814] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1016. [ 5252.169880] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1017. [ 5262.288011] eth0: no IPv6 routers present
  1018. [ 5274.998797] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Down
  1019. [ 5278.003560] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1020. [ 5283.032536] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1021. [ 5283.032607] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
  1022. [ 5748.040819] atl1c 0000:03:00.0: irq 45 for MSI/MSI-X
  1023. [ 5748.040890] atl1c 0000:03:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
RAW Paste Data