Public Pastes
daily pastebin goal
47%
SHARE
TWEET

Untitled

a guest Apr 27th, 2016 49 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. === START OF INFORMATION SECTION ===
  2. Device Model:     TOSHIBA MK2555GSXN
  3. Serial Number:    30GBT00JT
  4. LU WWN Device Id: 5 000039 261504f05
  5. Firmware Version: GC002M
  6. User Capacity:    250.059.350.016 bytes [250 GB]
  7. Sector Size:      512 bytes logical/physical
  8. Device is:        Not in smartctl database [for details use: -P showall]
  9. ATA Version is:   ATA8-ACS (minor revision not indicated)
  10. SATA Version is:  SATA 2.6, 3.0 Gb/s
  11. Local Time is:    Wed Apr 27 16:00:00 2016 ART
  12. SMART support is: Available - device has SMART capability.
  13. SMART support is: Enabled
  14.  
  15. === START OF READ SMART DATA SECTION ===
  16. SMART overall-health self-assessment test result: PASSED
  17.  
  18. General SMART Values:
  19. Offline data collection status:  (0x00) Offline data collection activity
  20.                     was never started.
  21.                     Auto Offline Data Collection: Disabled.
  22. Self-test execution status:      (   0) The previous self-test routine completed
  23.                     without error or no self-test has ever
  24.                     been run.
  25. Total time to complete Offline
  26. data collection:        (  120) seconds.
  27. Offline data collection
  28. capabilities:            (0x5b) SMART execute Offline immediate.
  29.                     Auto Offline data collection on/off support.
  30.                     Suspend Offline collection upon new
  31.                     command.
  32.                     Offline surface scan supported.
  33.                     Self-test supported.
  34.                     No Conveyance Self-test supported.
  35.                     Selective Self-test supported.
  36. SMART capabilities:            (0x0003) Saves SMART data before entering
  37.                     power-saving mode.
  38.                     Supports SMART auto save timer.
  39. Error logging capability:        (0x01) Error logging supported.
  40.                     General Purpose Logging supported.
  41. Short self-test routine
  42. recommended polling time:    (   2) minutes.
  43. Extended self-test routine
  44. recommended polling time:    (  92) minutes.
  45. SCT capabilities:          (0x0039) SCT Status supported.
  46.                     SCT Error Recovery Control supported.
  47.                     SCT Feature Control supported.
  48.                     SCT Data Table supported.
  49.  
  50. SMART Attributes Data Structure revision number: 16
  51. Vendor Specific SMART Attributes with Thresholds:
  52. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  53.   1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  54.   2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  55.   3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1036
  56.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       3570
  57.   5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       2
  58.   7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  59.   8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  60.   9 Power_On_Hours          0x0032   040   040   000    Old_age   Always       -       24157
  61.  10 Spin_Retry_Count        0x0033   171   100   030    Pre-fail  Always       -       0
  62.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       3512
  63. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       7951
  64. 192 Power-Off_Retract_Count 0x0032   098   098   000    Old_age   Always       -       1122
  65. 193 Load_Cycle_Count        0x0032   088   088   000    Old_age   Always       -       128207
  66. 194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       43 (Min/Max 14/63)
  67. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       2
  68. 197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
  69. 198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
  70. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  71. 220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       40
  72. 222 Loaded_Hours            0x0032   047   047   000    Old_age   Always       -       21279
  73. 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  74. 224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
  75. 226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       228
  76. 240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 1018 (device log contains only the most recent five errors)
  80.     CR = Command Register [HEX]
  81.     FR = Features Register [HEX]
  82.     SC = Sector Count Register [HEX]
  83.     SN = Sector Number Register [HEX]
  84.     CL = Cylinder Low Register [HEX]
  85.     CH = Cylinder High Register [HEX]
  86.     DH = Device/Head Register [HEX]
  87.     DC = Device Command Register [HEX]
  88.     ER = Error register [HEX]
  89.     ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 1018 occurred at disk power-on lifetime: 6946 hours (289 days + 10 hours)
  95.   When the command that caused the error occurred, the device was active or idle.
  96.  
  97.   After command completion occurred, registers were:
  98.   ER ST SC SN CL CH DH
  99.   -- -- -- -- -- -- --
  100.   40 41 22 28 f1 b2 6c  Error: UNC at LBA = 0x0cb2f128 = 213053736
  101.  
  102.   Commands leading to the command that caused the error were:
  103.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  104.   -- -- -- -- -- -- -- --  ----------------  --------------------
  105.   60 08 20 28 f1 b2 40 00      00:50:56.744  READ FPDMA QUEUED
  106.   2f 00 01 10 00 00 40 00      00:50:56.743  READ LOG EXT
  107.   60 08 18 28 f1 b2 40 00      00:50:48.655  READ FPDMA QUEUED
  108.   2f 00 01 10 00 00 40 00      00:50:48.654  READ LOG EXT
  109.   60 08 10 28 f1 b2 40 00      00:50:40.654  READ FPDMA QUEUED
  110.  
  111. Error 1017 occurred at disk power-on lifetime: 6946 hours (289 days + 10 hours)
  112.   When the command that caused the error occurred, the device was active or idle.
  113.  
  114.   After command completion occurred, registers were:
  115.   ER ST SC SN CL CH DH
  116.   -- -- -- -- -- -- --
  117.   40 41 1a 28 f1 b2 6c  Error: UNC at LBA = 0x0cb2f128 = 213053736
  118.  
  119.   Commands leading to the command that caused the error were:
  120.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  121.   -- -- -- -- -- -- -- --  ----------------  --------------------
  122.   60 08 18 28 f1 b2 40 00      00:50:48.655  READ FPDMA QUEUED
  123.   2f 00 01 10 00 00 40 00      00:50:48.654  READ LOG EXT
  124.   60 08 10 28 f1 b2 40 00      00:50:40.654  READ FPDMA QUEUED
  125.   2f 00 01 10 00 00 40 00      00:50:40.654  READ LOG EXT
  126.   60 08 08 28 f1 b2 40 00      00:50:32.584  READ FPDMA QUEUED
  127.  
  128. Error 1016 occurred at disk power-on lifetime: 6946 hours (289 days + 10 hours)
  129.   When the command that caused the error occurred, the device was active or idle.
  130.  
  131.   After command completion occurred, registers were:
  132.   ER ST SC SN CL CH DH
  133.   -- -- -- -- -- -- --
  134.   40 41 12 28 f1 b2 6c  Error: UNC at LBA = 0x0cb2f128 = 213053736
  135.  
  136.   Commands leading to the command that caused the error were:
  137.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  138.   -- -- -- -- -- -- -- --  ----------------  --------------------
  139.   60 08 10 28 f1 b2 40 00      00:50:40.654  READ FPDMA QUEUED
  140.   2f 00 01 10 00 00 40 00      00:50:40.654  READ LOG EXT
  141.   60 08 08 28 f1 b2 40 00      00:50:32.584  READ FPDMA QUEUED
  142.   ef 82 00 00 00 00 40 00      00:50:31.474  SET FEATURES [Disable write cache]
  143.   ef 03 45 00 00 00 40 00      00:50:31.473  SET FEATURES [Set transfer mode]
  144.  
  145. Error 1015 occurred at disk power-on lifetime: 6946 hours (289 days + 10 hours)
  146.   When the command that caused the error occurred, the device was active or idle.
  147.  
  148.   After command completion occurred, registers were:
  149.   ER ST SC SN CL CH DH
  150.   -- -- -- -- -- -- --
  151.   40 41 0a 28 f1 b2 6c  Error: UNC at LBA = 0x0cb2f128 = 213053736
  152.  
  153.   Commands leading to the command that caused the error were:
  154.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  155.   -- -- -- -- -- -- -- --  ----------------  --------------------
  156.   60 08 08 28 f1 b2 40 00      00:50:32.584  READ FPDMA QUEUED
  157.   ef 82 00 00 00 00 40 00      00:50:31.474  SET FEATURES [Disable write cache]
  158.   ef 03 45 00 00 00 40 00      00:50:31.473  SET FEATURES [Set transfer mode]
  159.   c6 00 10 00 00 00 40 00      00:50:31.473  SET MULTIPLE MODE
  160.   aa aa aa aa aa aa aa ff      00:50:31.465  [RESERVED]
  161.  
  162. Error 1014 occurred at disk power-on lifetime: 6946 hours (289 days + 10 hours)
  163.   When the command that caused the error occurred, the device was active or idle.
  164.  
  165.   After command completion occurred, registers were:
  166.   ER ST SC SN CL CH DH
  167.   -- -- -- -- -- -- --
  168.   40 41 3a 28 f1 b2 6c  Error: UNC at LBA = 0x0cb2f128 = 213053736
  169.  
  170.   Commands leading to the command that caused the error were:
  171.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  172.   -- -- -- -- -- -- -- --  ----------------  --------------------
  173.   60 08 38 28 f1 b2 40 00      00:50:23.454  READ FPDMA QUEUED
  174.   2f 00 01 10 00 00 40 00      00:50:23.454  READ LOG EXT
  175.   60 08 30 28 f1 b2 40 00      00:50:15.343  READ FPDMA QUEUED
  176.   2f 00 01 10 00 00 40 00      00:50:15.342  READ LOG EXT
  177.   60 08 28 28 f1 b2 40 00      00:50:07.287  READ FPDMA QUEUED
  178.  
  179. SMART Self-test log structure revision number 1
  180. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  181.  
  182. SMART Selective self-test log data structure revision number 1
  183.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  184.     1        0        0  Not_testing
  185.     2        0        0  Not_testing
  186.     3        0        0  Not_testing
  187.     4        0        0  Not_testing
  188.     5        0        0  Not_testing
  189. Selective self-test flags (0x0):
  190.   After scanning selected spans, do NOT read-scan remainder of disk.
RAW Paste Data
Top