Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.197697] system 00:09: ioport range 0x480-0x4bf has been reserved
- [ 0.197700] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.197704] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 0.197710] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
- [ 0.197720] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.197723] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.197730] system 00:0f: iomem range 0xf0000000-0xf3ffffff has been reserved
- [ 0.197735] system 00:10: iomem range 0x0-0x9ffff could not be reserved
- [ 0.197739] system 00:10: iomem range 0xc0000-0xcffff has been reserved
- [ 0.197742] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.197745] system 00:10: iomem range 0x100000-0xdfffffff could not be reserved
- [ 0.202522] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
- [ 0.202525] pci 0000:00:01.0: IO window: 0xe000-0xefff
- [ 0.202529] pci 0000:00:01.0: MEM window: 0xfa000000-0xfebfffff
- [ 0.202533] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
- [ 0.202537] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
- [ 0.202540] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
- [ 0.202545] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf41fffff
- [ 0.202549] pci 0000:00:1c.0: PREFETCH window: 0x000000f4200000-0x000000f43fffff
- [ 0.202556] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
- [ 0.202559] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
- [ 0.202564] pci 0000:00:1c.1: MEM window: 0xf9f00000-0xf9ffffff
- [ 0.202568] pci 0000:00:1c.1: PREFETCH window: 0x000000f4400000-0x000000f45fffff
- [ 0.202574] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
- [ 0.202576] pci 0000:00:1e.0: IO window: disabled
- [ 0.202580] pci 0000:00:1e.0: MEM window: disabled
- [ 0.202584] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.202597] alloc irq_desc for 16 on node -1
- [ 0.202600] alloc kstat_irqs on node -1
- [ 0.202607] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.202611] pci 0000:00:01.0: setting latency timer to 64
- [ 0.202618] pci 0000:00:1c.0: enabling device (0104 -> 0107)
- [ 0.202622] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.202626] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.202633] pci 0000:00:1c.1: enabling device (0106 -> 0107)
- [ 0.202636] alloc irq_desc for 17 on node -1
- [ 0.202638] alloc kstat_irqs on node -1
- [ 0.202642] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.202646] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.202652] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.202657] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.202660] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.202662] pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
- [ 0.202665] pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfebfffff]
- [ 0.202667] pci_bus 0000:04: resource 2 pref mem [0xe0000000-0xefffffff]
- [ 0.202670] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff]
- [ 0.202672] pci_bus 0000:03: resource 1 mem: [0xf4000000-0xf41fffff]
- [ 0.202675] pci_bus 0000:03: resource 2 pref mem [0xf4200000-0xf43fffff]
- [ 0.202677] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
- [ 0.202680] pci_bus 0000:02: resource 1 mem: [0xf9f00000-0xf9ffffff]
- [ 0.202682] pci_bus 0000:02: resource 2 pref mem [0xf4400000-0xf45fffff]
- [ 0.202685] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- [ 0.202687] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.202723] NET: Registered protocol family 2
- [ 0.202909] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.204314] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.208587] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.209123] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.209127] TCP reno registered
- [ 0.209279] NET: Registered protocol family 1
- [ 0.209406] pci 0000:04:00.0: Boot video device
- [ 0.209472] Unpacking initramfs...
- [ 0.442495] Freeing initrd memory: 9403k freed
- [ 0.447362] audit: initializing netlink socket (disabled)
- [ 0.447377] type=2000 audit(1320155936.443:1): initialized
- [ 0.450779] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.452213] VFS: Disk quotas dquot_6.5.2
- [ 0.452272] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.452352] msgmni has been set to 7051
- [ 0.452546] alg: No test for stdrng (krng)
- [ 0.452599] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.452603] io scheduler noop registered
- [ 0.452605] io scheduler anticipatory registered
- [ 0.452607] io scheduler deadline registered
- [ 0.452643] io scheduler cfq registered (default)
- [ 0.452752] alloc irq_desc for 24 on node -1
- [ 0.452754] alloc kstat_irqs on node -1
- [ 0.452765] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.452771] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.452866] alloc irq_desc for 25 on node -1
- [ 0.452867] alloc kstat_irqs on node -1
- [ 0.452875] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.452882] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.452992] alloc irq_desc for 26 on node -1
- [ 0.452994] alloc kstat_irqs on node -1
- [ 0.453001] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
- [ 0.453008] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.454456] Linux agpgart interface v0.103
- [ 0.454517] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.454610] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.454992] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.455118] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 0.455177] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.455179] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.455871] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.455956] mice: PS/2 mouse device common for all mice
- [ 0.455993] rtc_cmos 00:03: RTC can wake from S4
- [ 0.456029] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.456053] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.456067] cpuidle: using governor ladder
- [ 0.456069] cpuidle: using governor menu
- [ 0.456073] No iBFT detected.
- [ 0.456405] TCP cubic registered
- [ 0.456519] NET: Registered protocol family 10
- [ 0.457279] Mobile IPv6
- [ 0.457283] NET: Registered protocol family 17
- [ 0.457373] PM: Resume from disk failed.
- [ 0.457385] registered taskstats version 1
- [ 0.457678] rtc_cmos 00:03: setting system clock to 2011-11-01 13:58:57 UTC (1320155937)
- [ 0.457722] Initalizing network drop monitor service
- [ 0.457751] Freeing unused kernel memory: 592k freed
- [ 0.457945] Write protecting the kernel read-only data: 4236k
- [ 0.475580] udev[56]: starting version 164
- [ 0.483548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
- [ 0.579873] usbcore: registered new interface driver usbfs
- [ 0.580148] usbcore: registered new interface driver hub
- [ 0.580369] usbcore: registered new device driver usb
- [ 0.583947] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.583993] alloc irq_desc for 23 on node -1
- [ 0.583995] alloc kstat_irqs on node -1
- [ 0.584005] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.584024] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.584027] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.584057] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 0.584092] ehci_hcd 0000:00:1d.7: using broken periodic workaround
- [ 0.584103] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.587994] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.588013] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9effc00
- [ 0.594607] SCSI subsystem initialized
- [ 0.603938] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.603971] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.603974] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.603977] usb usb1: Product: EHCI Host Controller
- [ 0.603979] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 0.603981] usb usb1: SerialNumber: 0000:00:1d.7
- [ 0.604128] usb usb1: configuration #1 chosen from 1 choice
- [ 0.604204] hub 1-0:1.0: USB hub found
- [ 0.604214] hub 1-0:1.0: 8 ports detected
- [ 0.612258] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.612324] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.612335] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.612339] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.612355] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.612386] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
- [ 0.612428] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.612431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.612433] usb usb2: Product: UHCI Host Controller
- [ 0.612435] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.612437] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.612532] usb usb2: configuration #1 chosen from 1 choice
- [ 0.612564] hub 2-0:1.0: USB hub found
- [ 0.612571] hub 2-0:1.0: 2 ports detected
- [ 0.612628] alloc irq_desc for 19 on node -1
- [ 0.612631] alloc kstat_irqs on node -1
- [ 0.612639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.612646] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.612649] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.612657] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 0.612691] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
- [ 0.612723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.612725] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.612728] usb usb3: Product: UHCI Host Controller
- [ 0.612730] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.612732] usb usb3: SerialNumber: 0000:00:1d.1
- [ 0.612796] usb usb3: configuration #1 chosen from 1 choice
- [ 0.612824] hub 3-0:1.0: USB hub found
- [ 0.612831] hub 3-0:1.0: 2 ports detected
- [ 0.612880] alloc irq_desc for 18 on node -1
- [ 0.612882] alloc kstat_irqs on node -1
- [ 0.612888] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.612894] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.612897] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.612906] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 0.612938] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
- [ 0.612981] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.612983] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.612986] usb usb4: Product: UHCI Host Controller
- [ 0.612988] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.612990] usb usb4: SerialNumber: 0000:00:1d.2
- [ 0.613073] usb usb4: configuration #1 chosen from 1 choice
- [ 0.613106] hub 4-0:1.0: USB hub found
- [ 0.613113] hub 4-0:1.0: 2 ports detected
- [ 0.613170] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 0.613178] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 0.613181] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 0.613189] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 0.613222] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d080
- [ 0.613256] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.613259] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.613261] usb usb5: Product: UHCI Host Controller
- [ 0.613263] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.613265] usb usb5: SerialNumber: 0000:00:1d.3
- [ 0.613334] usb usb5: configuration #1 chosen from 1 choice
- [ 0.613362] hub 5-0:1.0: USB hub found
- [ 0.613369] hub 5-0:1.0: 2 ports detected
- [ 0.614750] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.614761] atl1 0000:02:00.0: setting latency timer to 64
- [ 0.614785] atl1 0000:02:00.0: version 2.1.3
- [ 0.615082] libata version 3.00 loaded.
- [ 0.616180] Floppy drive(s): fd0 is 1.44M
- [ 0.619129] ata_piix 0000:00:1f.1: version 2.13
- [ 0.619150] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.619198] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 0.619290] scsi0 : ata_piix
- [ 0.620381] scsi1 : ata_piix
- [ 0.621978] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 0.621982] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 0.622026] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.622032] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 0.622085] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.624705] scsi2 : ata_piix
- [ 0.624979] scsi3 : ata_piix
- [ 0.626772] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
- [ 0.626776] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
- [ 0.635638] FDC 0 is a post-1991 82077
- [ 0.792653] ata3.00: ATA-7: ST3250410AS, 3.AAA, max UDMA/133
- [ 0.792659] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 0/32)
- [ 0.804722] ata3.00: configured for UDMA/133
- [ 0.804881] scsi 2:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5
- [ 0.812646] ata4.00: ATA-7: SAMSUNG HD250HJ, FH100-05, max UDMA7
- [ 0.812651] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 0.820776] ata4.00: configured for UDMA/133
- [ 0.820914] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD250HJ FH10 PQ: 0 ANSI: 5
- [ 0.827731] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 0.827788] sd 2:0:0:0: [sda] Write Protect is off
- [ 0.827791] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 0.827815] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.827998] sda:
- [ 0.828012] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 0.828123] sd 3:0:0:0: [sdb] Write Protect is off
- [ 0.828126] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 0.828149] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 0.828315] sdb: sdb1 sdb2 sdb3 sdb4
- [ 0.835133] sd 3:0:0:0: [sdb] Attached SCSI disk
- [ 0.843132] sda1 sda2 sda3 sda4
- [ 0.843488] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 31.816032] ata3: lost interrupt (Status 0x50)
- [ 31.816055] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 31.816107] ata3.00: failed command: READ DMA
- [ 31.816159] ata3.00: cmd c8/00:08:00:03:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 31.816160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 31.816241] ata3.00: status: { DRDY }
- [ 31.816288] ata3: soft resetting link
- [ 31.996374] ata3.00: configured for UDMA/133
- [ 31.996381] ata3.00: device reported invalid CHS sector 0
- [ 31.996391] ata3: EH complete
- [ 32.137657] md: raid1 personality registered for level 1
- [ 32.150714] md: md0 stopped.
- [ 32.152143] md: bind<sdb1>
- [ 32.152702] md: bind<sda1>
- [ 32.155132] raid1: raid set md0 active with 2 out of 2 mirrors
- [ 32.155162] md0: detected capacity change from 0 to 4300728320
- [ 32.156133] md0: unknown partition table
- [ 62.804032] ata3: lost interrupt (Status 0x50)
- [ 62.804054] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 62.804105] ata3.00: failed command: READ DMA
- [ 62.804158] ata3.00: cmd c8/00:08:3f:0a:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 62.804160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 62.804240] ata3.00: status: { DRDY }
- [ 62.804287] ata3: soft resetting link
- [ 62.984361] ata3.00: configured for UDMA/133
- [ 62.984367] ata3.00: device reported invalid CHS sector 0
- [ 62.984375] ata3: EH complete
- [ 63.050072] md: md1 stopped.
- [ 93.804032] ata3: lost interrupt (Status 0x50)
- [ 93.804055] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 93.804107] ata3.00: failed command: READ DMA
- [ 93.804159] ata3.00: cmd c8/00:01:4b:34:80/00:00:00:00:00/e0 tag 0 dma 512 in
- [ 93.804160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 93.804241] ata3.00: status: { DRDY }
- [ 93.804288] ata3: soft resetting link
- [ 93.984361] ata3.00: configured for UDMA/133
- [ 93.984368] ata3.00: device reported invalid CHS sector 0
- [ 93.984377] ata3: EH complete
- [ 94.025063] md: bind<sda2>
- [ 94.025270] md: bind<sdb2>
- [ 94.025287] md: kicking non-fresh sda2 from array!
- [ 94.025293] md: unbind<sda2>
- [ 94.036544] md: export_rdev(sda2)
- [ 94.037793] raid1: raid set md1 active with 1 out of 2 mirrors
- [ 94.037820] md1: detected capacity change from 0 to 107379907584
- [ 94.038786] md1: unknown partition table
- [ 124.804037] ata3: lost interrupt (Status 0x50)
- [ 124.804061] ata3.00: limiting speed to UDMA/100:PIO4
- [ 124.804067] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 124.804119] ata3.00: failed command: READ DMA
- [ 124.804177] ata3.00: cmd c8/00:02:47:08:00/00:00:00:00:00/e0 tag 0 dma 1024 in
- [ 124.804178] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 124.804291] ata3.00: status: { DRDY }
- [ 124.804345] ata3: soft resetting link
- [ 124.984357] ata3.00: configured for UDMA/100
- [ 124.984364] ata3.00: device reported invalid CHS sector 0
- [ 124.984373] ata3: EH complete
- [ 125.055265] md: md2 stopped.
- [ 125.057305] md: bind<sda3>
- [ 125.059235] md: bind<sdb3>
- [ 125.059266] md: kicking non-fresh sda3 from array!
- [ 125.059275] md: unbind<sda3>
- [ 125.068056] md: export_rdev(sda3)
- [ 125.069310] raid1: raid set md2 active with 1 out of 2 mirrors
- [ 125.069340] md2: detected capacity change from 0 to 64435721216
- [ 125.070329] md2: unknown partition table
- [ 155.804031] ata3: lost interrupt (Status 0x50)
- [ 155.804053] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 155.804113] ata3.00: failed command: READ DMA EXT
- [ 155.804172] ata3.00: cmd 25/00:02:ac:c6:80/00:00:14:00:00/e0 tag 0 dma 1024 in
- [ 155.804173] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 155.804286] ata3.00: status: { DRDY }
- [ 155.804340] ata3: soft resetting link
- [ 155.984363] ata3.00: configured for UDMA/100
- [ 155.984369] ata3.00: device reported invalid CHS sector 0
- [ 155.984377] ata3: EH complete
- [ 156.023877] md: md3 stopped.
- [ 156.025182] md: bind<sdb4>
- [ 156.025372] md: bind<sda4>
- [ 156.027608] raid1: raid set md3 active with 2 out of 2 mirrors
- [ 156.027639] md3: detected capacity change from 0 to 73935919104
- [ 156.028677] md3: unknown partition table
- [ 156.233692] PM: Starting manual resume from disk
- [ 156.233697] PM: Resume from partition 9:0
- [ 156.233698] PM: Checking hibernation image.
- [ 156.256728] PM: Error -22 checking image file
- [ 156.256732] PM: Resume from disk failed.
- [ 156.311272] kjournald starting. Commit interval 5 seconds
- [ 156.311293] EXT3-fs: mounted filesystem with ordered data mode.
- [ 157.256308] udev[365]: starting version 164
- [ 157.577184] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
- [ 157.577194] ACPI: Power Button [PWRB]
- [ 157.577262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 157.577266] ACPI: Power Button [PWRF]
- [ 157.616711] ACPI: SSDT 00000000dff9e0b0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
- [ 157.617047] processor LNXCPU:00: registered as cooling_device0
- [ 157.617619] ACPI: SSDT 00000000dff9e2d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
- [ 157.617913] processor LNXCPU:01: registered as cooling_device1
- [ 157.705044] input: PC Speaker as /devices/platform/pcspkr/input/input4
- [ 158.378330] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 158.402745] intel_rng: FWH not detected
- [ 158.534971] parport_pc 00:07: reported by Plug and Play ACPI
- [ 158.535082] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
- [ 158.537462] Error: Driver 'pcspkr' is already registered, aborting...
- [ 158.596578] [drm] Initialized drm 1.1.0 20060810
- [ 158.687950] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 158.687984] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 158.719980] nouveau 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 158.719987] nouveau 0000:04:00.0: setting latency timer to 64
- [ 158.723052] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x086100a2)
- [ 158.723933] [drm] nouveau 0000:04:00.0: Attempting to load BIOS image from PRAMIN
- [ 158.770214] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
- [ 158.771535] [drm] nouveau 0000:04:00.0: ... appears to be valid
- [ 158.771543] [drm] nouveau 0000:04:00.0: BIT BIOS found
- [ 158.771546] [drm] nouveau 0000:04:00.0: Bios version 60.86.18.00
- [ 158.771550] [drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not currently supported
- [ 158.771552] [drm] nouveau 0000:04:00.0: BIT table 'd' not found
- [ 158.771555] [drm] nouveau 0000:04:00.0: Found Display Configuration Block version 4.0
- [ 158.771559] [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5 6 2
- [ 158.771562] [drm] nouveau 0000:04:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
- [ 158.771565] [drm] nouveau 0000:04:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
- [ 158.771567] [drm] nouveau 0000:04:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
- [ 158.771570] [drm] nouveau 0000:04:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
- [ 158.771573] [drm] nouveau 0000:04:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
- [ 158.771576] [drm] nouveau 0000:04:00.0: 5: 0x00000362: type 0x62 idx 3 tag 0xff
- [ 158.771579] [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 02000300 00000028
- [ 158.771586] [drm] nouveau 0000:04:00.0: Raw DCB entry 1: 01000302 00020030
- [ 158.771588] [drm] nouveau 0000:04:00.0: Raw DCB entry 2: 04011310 00000028
- [ 158.771590] [drm] nouveau 0000:04:00.0: Raw DCB entry 3: 010223f1 00c0c083
- [ 158.771600] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xB9B5
- [ 158.812635] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xBC68
- [ 158.848529] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xC6B4
- [ 158.848539] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xC7A6
- [ 158.856594] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xC977
- [ 158.856598] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xC9DC
- [ 158.880023] [drm] nouveau 0000:04:00.0: 0xC9DC: Condition still not met after 20ms, skipping following opcodes
- [ 158.880032] [drm] nouveau 0000:04:00.0: 0xAC70: parsing output script 0
- [ 158.880037] [drm] nouveau 0000:04:00.0: 0xA33E: parsing output script 0
- [ 158.951478] [TTM] Zone kernel: Available graphics memory: 1805500 kiB.
- [ 158.951489] [drm] nouveau 0000:04:00.0: 256 MiB VRAM
- [ 158.972666] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
- [ 158.973195] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1
- [ 158.977722] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 158.978261] [drm] nouveau 0000:04:00.0: Detected a DAC output
- [ 158.978264] [drm] nouveau 0000:04:00.0: Detected a TMDS output
- [ 158.978267] [drm] nouveau 0000:04:00.0: Detected a DAC output
- [ 158.978269] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
- [ 158.978274] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector
- [ 158.978337] [drm] nouveau 0000:04:00.0: Detected a VGA connector
- [ 159.148710] [drm] nouveau 0000:04:00.0: allocated 1440x900 fb: 0x40250000, bo ffff880037518e00
- [ 159.152612] [drm] nouveau 0000:04:00.0: 0x0F97: parsing clock script 0
- [ 159.152967] Console: switching to colour frame buffer device 180x56
- [ 159.154373] fb0: nouveaufb frame buffer device
- [ 159.154375] registered panic notifier
- [ 159.154380] [drm] Initialized nouveau 0.0.15 20090420 for 0000:04:00.0 on minor 0
- [ 188.804037] ata3: lost interrupt (Status 0x50)
- [ 188.804062] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 188.804084] ata3.00: failed command: READ DMA
- [ 188.804101] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 188.804103] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 188.804127] ata3.00: status: { DRDY }
- [ 188.804148] ata3: soft resetting link
- [ 188.984379] ata3.00: configured for UDMA/100
- [ 188.984386] ata3.00: device reported invalid CHS sector 0
- [ 188.984397] ata3: EH complete
- [ 219.804040] ata3: lost interrupt (Status 0x50)
- [ 219.804064] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 219.804086] ata3.00: failed command: READ DMA EXT
- [ 219.804104] ata3.00: cmd 25/00:02:0a:c6:80/00:00:14:00:00/e0 tag 0 dma 1024 in
- [ 219.804106] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 219.804131] ata3.00: status: { DRDY }
- [ 219.804157] ata3: soft resetting link
- [ 219.984359] ata3.00: configured for UDMA/100
- [ 219.984367] ata3.00: device reported invalid CHS sector 0
- [ 219.984377] ata3: EH complete
- [ 250.804548] ata3: lost interrupt (Status 0x50)
- [ 250.804573] ata3.00: limiting speed to UDMA/33:PIO4
- [ 250.804579] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 250.804606] ata3.00: failed command: READ DMA
- [ 250.804622] ata3.00: cmd c8/00:08:57:08:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 250.804624] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 250.804651] ata3.00: status: { DRDY }
- [ 250.804675] ata3: soft resetting link
- [ 250.984370] ata3.00: configured for UDMA/33
- [ 250.984376] ata3.00: device reported invalid CHS sector 0
- [ 250.984387] ata3: EH complete
- [ 281.804049] ata3: lost interrupt (Status 0x50)
- [ 281.804072] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 281.804093] ata3.00: failed command: READ DMA
- [ 281.804109] ata3.00: cmd c8/00:04:4f:08:00/00:00:00:00:00/e0 tag 0 dma 2048 in
- [ 281.804111] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 281.804136] ata3.00: status: { DRDY }
- [ 281.804157] ata3: soft resetting link
- [ 281.984357] ata3.00: configured for UDMA/33
- [ 281.984364] ata3.00: device reported invalid CHS sector 0
- [ 281.984375] ata3: EH complete
- [ 312.804050] ata3: lost interrupt (Status 0x50)
- [ 312.804073] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 312.804094] ata3.00: failed command: READ DMA
- [ 312.804110] ata3.00: cmd c8/00:10:67:08:00/00:00:00:00:00/e0 tag 0 dma 8192 in
- [ 312.804112] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 312.804138] ata3.00: status: { DRDY }
- [ 312.804159] ata3: soft resetting link
- [ 312.984358] ata3.00: configured for UDMA/33
- [ 312.984365] ata3.00: device reported invalid CHS sector 0
- [ 312.984376] ata3: EH complete
- [ 313.003888] Adding 4199860k swap on /dev/md0. Priority:-1 extents:1 across:4199860k
- [ 343.804048] ata3: lost interrupt (Status 0x50)
- [ 343.804072] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 343.804092] ata3.00: failed command: READ DMA
- [ 343.804108] ata3.00: cmd c8/00:08:2f:33:80/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 343.804110] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 343.804675] ata3.00: status: { DRDY }
- [ 343.804954] ata3: soft resetting link
- [ 343.984864] ata3.00: configured for UDMA/33
- [ 343.984871] ata3.00: device reported invalid CHS sector 0
- [ 343.984883] ata3: EH complete
- [ 374.804050] ata3: lost interrupt (Status 0x50)
- [ 374.804074] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 374.804410] ata3.00: failed command: READ DMA
- [ 374.804705] ata3.00: cmd c8/00:08:3f:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in
- [ 374.804706] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 374.805288] ata3.00: status: { DRDY }
- [ 374.805589] ata3: soft resetting link
- [ 374.984359] ata3.00: configured for UDMA/33
- [ 374.984366] ata3.00: device reported invalid CHS sector 0
- [ 374.984376] ata3: EH complete
- [ 375.293489] EXT3 FS on md1, internal journal
- [ 375.410758] loop: module loaded
- [ 375.435628] coretemp coretemp.0: Using relative temperature scale!
- [ 375.435674] coretemp coretemp.1: Using relative temperature scale!
- [ 375.457524] w83627ehf: Found W83627DHG chip at 0x290
- [ 375.457623] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299]
- [ 375.457957] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 405.804048] ata3: lost interrupt (Status 0x50)
- [ 405.804072] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 405.804463] ata3.00: failed command: READ DMA EXT
- [ 405.804813] ata3.00: cmd 25/00:08:a4:cf:80/00:00:14:00:00/e0 tag 0 dma 4096 in
- [ 405.804814] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 405.805517] ata3.00: status: { DRDY }
- [ 405.805884] ata3: soft resetting link
- [ 405.984361] ata3.00: configured for UDMA/33
- [ 405.984368] ata3.00: device reported invalid CHS sector 0
- [ 405.984378] ata3: EH complete
- [ 436.804050] ata3: lost interrupt (Status 0x50)
- [ 436.804074] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 436.804492] ata3.00: failed command: READ DMA EXT
- [ 436.804863] ata3.00: cmd 25/00:04:bc:ee:80/00:00:14:00:00/e0 tag 0 dma 2048 in
- [ 436.804864] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 436.805611] ata3.00: status: { DRDY }
- [ 436.805988] ata3: soft resetting link
- [ 436.984365] ata3.00: configured for UDMA/33
- [ 436.984371] ata3.00: device reported invalid CHS sector 0
- [ 436.984382] ata3: EH complete
- [ 437.864266] kjournald starting. Commit interval 5 seconds
- [ 437.890065] EXT3 FS on md3, internal journal
- [ 437.890072] EXT3-fs: mounted filesystem with ordered data mode.
- [ 437.914999] kjournald starting. Commit interval 5 seconds
- [ 437.939840] EXT3 FS on md2, internal journal
- [ 437.939844] EXT3-fs: mounted filesystem with ordered data mode.
- [ 438.495223] alloc irq_desc for 27 on node -1
- [ 438.495227] alloc kstat_irqs on node -1
- [ 438.495244] atl1 0000:02:00.0: irq 27 for MSI/MSI-X
- [ 438.495300] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
- [ 448.928029] eth0: no IPv6 routers present
- [ 484.804041] ata3: lost interrupt (Status 0x50)
- [ 484.804065] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
- [ 484.804418] ata3.00: failed command: READ DMA EXT
- [ 484.804734] ata3.00: cmd 25/00:08:a4:ce:b3/00:00:1b:00:00/e0 tag 0 dma 4096 in
- [ 484.804735] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
- [ 484.805348] ata3.00: status: { DRDY }
- [ 484.805660] ata3: soft resetting link
- [ 484.984373] ata3.00: configured for UDMA/33
- [ 484.984379] ata3.00: device reported invalid CHS sector 0
- [ 484.984389] ata3: EH complete
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement