Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Booting Linux on physical CPU 0x0
- Linux version 3.14.77 (barton@localhost.localdomain) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 SMP PREEMPT Wed Jul 29 12:16:32 CST 2020
- CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2
- Memory policy: Data cache writealloc
- On node 0 totalpages: 65024
- free_area_init_node: node 0, pgdat c074b100, node_mem_map cfdfa000
- Normal zone: 512 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 65024 pages, LIFO batch:15
- PERCPU: Embedded 8 pages/cpu @cfdca000 s8576 r8192 d16000 u32768
- pcpu-alloc: s8576 r8192 d16000 u32768 alloc=8*4096
- pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64512
- Kernel command line: root_rfs=0x00203640 flash_type=norplusnand ubi.mtd=UBI_DEV clk_ignore_unused
- PID hash table entries: 1024 (order: 0, 4096 bytes)
- Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- Memory: 251488K/260096K available (3995K kernel code, 201K rwdata, 1160K rodata, 172K init, 537K bss, 8608K reserved, 0K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
- lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0208000 - 0xc0710ec4 (5156 kB)
- .init : 0xc0711000 - 0xc073c180 ( 173 kB)
- .data : 0xc073e000 - 0xc0770504 ( 202 kB)
- .bss : 0xc0770504 - 0xc07f6b98 ( 538 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Invalid signature of oopsbuf: F0-F0-F0-F0-F0-F0-F0-F0 (len -252645136)
- Preemptible hierarchical RCU implementation.
- NR_IRQS:16 nr_irqs:16 16
- Architected cp15 timer(s) running at 48.00MHz (virt).
- sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 2863311552512ns
- Switching to timer-based delay loop
- Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x802133c0 - 0x80213418
- CPU1: Booted secondary processor
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: Booted secondary processor
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: Booted secondary processor
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (384.00 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- pinctrl core: initialized pinctrl subsystem
- regulator-dummy: no parameters
- NET: Registered protocol family 16
- DMA: preallocated 2048 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 3
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 2
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
- hw-breakpoint: CPU 2 failed to disable vector catch
- hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
- Version Rollback Feature Disabled
- gpiochip_add: registered GPIOs 0 to 69 on device: 1000000.pinctrl
- GPIO chip 1000000.pinctrl: created GPIO range 0->69 ==> 1000000.pinctrl PIN 0->69
- sps:sps is ready.
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- msm_bus_fabric_init_driver
- msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus4096 ctx1
- msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- msm_bus_device 580000.ad-hoc-bus: Failed to get bus clk for bus1024 ctx1
- Switched to clocksource arch_sys_counter
- NET: Registered protocol family 2
- TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- TCP: Hash tables configured (established 2048 bind 2048)
- TCP: reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- msgmni has been set to 491
- Key type asymmetric registered
- Asymmetric key parser 'x509' registered
- io scheduler noop registered
- io scheduler deadline registered (default)
- tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
- tcsr 1953000.ess_tcsr: setting ess interface select = 0
- tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
- tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- msm_serial 78af000.serial: msm_serial: detected port #0
- msm_serial 78af000.serial: uartclk = 1843200
- 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 139, base_baud = 115200) is a MSM
- msm_serial: console setup on port #0
- console [ttyMSM0] enabled
- msm_serial: driver initialized
- msm_serial_hsl_init: driver initialized
- msm_serial_hs module loaded
- qca_serial_hs module loaded
- brd: module loaded
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/gpio_spi[0]'
- spi_gpio gpio_spi.7: gpio-miso property not found, switching to no-rx mode
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- gpiochip_find_base: found new base at 240
- gpiochip_add: registered GPIOs 240 to 255 on device: 74hc595
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/spi@78b5000[0]'
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/spi@78b5000[0]'
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/spi@78b5000[0]'
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/spi@78b5000[0]'
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/spi@78b5000[0]'
- of_get_named_gpiod_flags: can't parse gpios property of node '/soc/spi@78b5000[0]'
- sps: BAM device 0x07884000 is not registered yet.
- sps:BAM 0x07884000 is registered.
- m25p80 spi0.0: found w25q128, expected n25q128a11
- m25p80 spi0.0: w25q128 (16384 Kbytes)
- Creating 1 MTD partitions on "msm-nor0":
- 0x000000000000-0x000000200000 : "Bootloader"
- IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
- Hooking IMQ after NAT on PREROUTING.
- Hooking IMQ before NAT on POSTROUTING.
- of_get_named_gpiod_flags exited with status 0
- phy_reset_gpio is 62
- libphy: ipq40xx_mdio: probed
- ipq40xx-mdio 90000.mdio: ipq40xx-mdio driver was registered
- PPP generic driver version 2.4.2
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- PPTP driver version 0.8.5
- i2c /dev entries driver
- requesting memory region failed
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- of_get_named_gpiod_flags exited with status 0
- nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
- nand: Winbond W25N01GV 128MiB 3.3V
- nand: 128MiB, SLC, page size: 2048, OOB size: 64
- Scanning device for bad blocks
- sps:BAM 0x07884000 (va:0xd0f40000) enabled: ver:0x19, number of pipes:12
- random: nonblocking pool is initialized
- 1 ofpart partitions found on MTD device spi0.1
- Creating 1 MTD partitions on "spi0.1":
- 0x000000000000-0x000008000000 : "UBI_DEV"
- nf_conntrack version 0.5.0 (3929 buckets, 15716 max)
- xt_time: kernel timezone is -0000
- gre: GRE over IPv4 demultiplexor driver
- ip_tables: (C) 2000-2006 Netfilter Core Team
- arp_tables: (C) 2002 David S. Miller
- TCP: cubic registered
- NET: Registered protocol family 10
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 17
- Bridge firewalling registered
- l2tp_core: L2TP core driver, V2.0
- l2tp_ppp: PPPoL2TP kernel driver, V2.0
- l2tp_netlink: L2TP netlink interface
- 8021q: 802.1Q VLAN Support v1.8
- Registering SWP/SWPB emulation handler
- regulator-dummy: disabling
- UBI: attaching mtd1 to ubi0
- UBI: scanning is finished
- UBI: attached mtd1 (name "UBI_DEV", size 128 MiB) to ubi0
- UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- UBI: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0
- UBI: user volume: 6, internal volumes: 1, max. volumes count: 128
- UBI: max/mean erase counter: 23/7, WL threshold: 4096, image sequence number: 389937042
- UBI: available PEBs: 20, total reserved PEBs: 1004, PEBs reserved for bad PEB handling: 20
- UBI: background thread "ubi_bgt0d" started, PID 73
- gluebi_create: Hook read/write method of Factory.
- gluebi_create: Hook read/write method of Factory2.
- [Factory-0]: OK (ver: 14)
- [Factory2-0]: OK (ver: 14)
- Select [Factory-0]
- volume linux rfs_offset 203640 mtd->size 3013000
- Creating 1 MTD partitions on "linux":
- 0x000000203640-0x000003013000 : "rootfs"
- mtd: device 6 (rootfs) set to be root filesystem
- volume linux2 rfs_offset 203640 mtd->size 3013000
- Creating 1 MTD partitions on "linux2":
- 0x000000203640-0x000003013000 : "rootfs2"
- gluebi_create: skip jffs2 volume
- clk: Not disabling unused clocks
- VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
- devtmpfs: mounted
- Freeing unused kernel memory: 172K (c0711000 - c073c000)
- offset 0x50000 elapse 40ms
- _nvram_free: 87(modprobe) nvram_idx(0 / 1)
- found private data block and skip it
- ssdk_alloc_priv[4402]:INFO:ess-switch dts node number: 1
- ssdk_dt_parse[2643]:INFO:ess-switch DT exist!
- ssdk_dt_parse[2672]:INFO:switch_access_mode: local bus
- ssdk_dt_parse_mac_mode[2271]:INFO:mac mode = 0x0
- ssdk_dt_parse_mac_mode[2277]:INFO:mac mode1 doesn't exit!
- ssdk_dt_parse_mac_mode[2286]:INFO:mac mode2 doesn't exit!
- ssdk_dt_parse_uniphy[2305]:INFO:ess-uniphy DT doesn't exist!
- ssdk_dt_parse_scheduler_cfg[2495]:ERROR:cannot find port_scheduler_resource node
- ssdk_dt_parse_phy_info[2538]:INFO:qcom,port_phyinfo DT doesn't exist!
- ssdk_dt_parse_mdio[2575]:INFO:mdio DT exist!
- ssdk_dt_parse[2698]:INFO:switchreg_base_addr: 0xc000000
- ssdk_dt_parse[2699]:INFO:switchreg_size: 0x80000
- ssdk_dt_parse[2708]:INFO:ess-psgmii DT exist!
- ssdk_dt_parse[2765]:INFO:current dts led_source_num is 0
- ssdk_plat_init start
- enable ess clk
- malibu_phy_api_ops_init[2505]:INFO:qca probe malibu phy driver succeeded!
- regi_init[4507]:INFO:Initializing DESS!!
- ssdk_switch_register[1588]:INFO:Chip version 0x1401
- qca_link_polling_select[1282]:INFO:link-polling-required node does not exist
- ssdk_switch_register[1611]:INFO:polling is selected
- regi_init[4516]:INFO:Initializing DESS Done!!
- regi_init[4540]:INFO:qca-ssdk module init succeeded!
- essedma: unknown parameter 'essedma' ignored
- bled: GPIO#10: netdev eth1.
- bled: GPIO#8: netdev ath0.
- bled: GPIO#9: netdev ath1.
- bled: GPIO#11: USB BUS mask c.
- mem_manager: module license 'unspecified' taints kernel.
- Disabling lock debugging due to kernel taint
- ath_dfs: Version 2.0.0
- Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
- ath_spectral: Version 2.0.0
- Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
- *********** IPQ4019 *************Wifi0 CPU frequency 250000000
- hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
- hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
- __ol_ath_attach() Allocated scn cd4404c0
- __ol_ath_attach: dev name wifi0
- ol_ath_attach interface_id 0
- ol_target_init() BMI inited.
- ol_target_init() BMI Get Target Info.
- Chip id: 0xb, chip version: 0x1000000
- CE WAR Disabled
- NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
- ol_target_init() configure Target .
- Target Version is 1000000
- Flash Download Address c0000
- ol_transfer_bin_file: flash data file defined
- ol_transfer_bin_file[3815] Get Caldata for wifi0.
- qc98xx_verify_checksum: flash checksum passed: 0xc144
- ol_transfer_bin_file 3881: Download Flash data len 12064
- Board extended Data download address: 0x0
- Board data initialized
- ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
- Selecting OTP binary for CHIP Version -1065432708
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 0, Download data len 4676
- First OTP send param 8000
- ol_ath_download_firmware :First OTP download and Execute is good address:0x4000 return param 4660
- ol_ath_download_firmware:##Board Id 16 , CHIP Id 0
- ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
- wifi0: Selecting board data file name boardData_1_0_IPQ4019_Y9803_wifi0.bin
- ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_Y9803_wifi0.bin
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 3, Download data len 12064
- Board extended Data download address: 0x0
- ol_ath_download_firmware: Using 0x1234 for the remainder of init
- Selecting OTP binary for CHIP Version -1065432708
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 0, Download data len 4676
- [Flash] : Ignore Module param
- Second otp download Param 10000
- ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
- Mission mode: Firmware CHIP Version -1065432708
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_swap_wlan_memory_expansion: length:189775 size_left:189795 dma_size_left:262144 fw_temp:d16d5004 fw_entry_size:189799
- ol_swap_wlan_memory_expansion: dma_virt_addr :d1694000 fw_temp: d16d5008 length: 189775
- Swap: bytes_left to copy: fw:16; dma_page:72369
- ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:72369 fw_temp:d170355b fw_entry_size:189799
- Swap: wrong length read:0
- ol_swap_wlan_memory_expansion: Swap total_bytes copied: 189775 Target address 418320
- scn=cd4404c0 target_write_addr=418320 seg_info=ce3bb910
- ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
- bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
- ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
- ath10k_ahb a000000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a000000.wifi: Falling back to user helper
- ath10k_ahb a000000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 1, Download data len 379784
- ol_target_init() Download FW done.
- ERROR: No wifi_dump dts node available in the dts entry file
- ol_ath_attach() WMI attached. wmi_handle cdce0000
- wmi_unified_register_event_handler: Event id 62 is unavailable
- +htc_create .. HIF :cdff0000-htc_create: (0xceb3d000)
- htc_wmi_init() HT Create . ceb3d000
- htc_wmi_init 7762 host_enable 0 nss_nwifi_offload 0
- ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
- OL_ACBKMinfree : 0
- OL_ACBEMinfree : 0
- OL_ACVIMinfree : 0
- OL_ACVOMinfree : 0
- hif_enable_fastpath, Enabling fastpath mode
- +HWT
- hif_completion_thread_startup: pipe_num:0 pipe_info:0xcdff4578hif_completion_thread_startup: pipe_num:3 pipe_info:0xcdff4650hif_completion_thread_startup: pipe_num:4 pipe_info:0xcdff4698
- -HWT
- Startup Mode-0 set
- htt_peer_map_timer_init Enter pdev cd198000 hrtimer cd19c948
- htt_alloc_peer_map_mem : Alloc Success : host q vaddr cd1a2000 paddr 8d1a2000
- htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
- ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from cce20000
- Firmware_Build_Number:66
- host/RAM_fw Build Ver Mismatch: H:0x32, F:0x42 !
- FW wireless modes: 0x680c
- num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
- btcoex_support 0, wlan_prio_gpio 0, coex_gpio_pin 0 0 0
- wmi_service_coex_gpio 1, wmi_service_4_wire_coex_support 1, coex_version 0
- Sending Ext resource cfg: HOST PLATFORM as 0
- fw_feature_bitmap as 50 to TGT
- ol_ath_service_ready_event: tt_support: 1
- ol_ath_service_ready_event: periodic_chan_stats: 1
- ol_ath_service_ready_event: sw_cal_support_check_flag: 1
- Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
- Airtime Fairness: num_peers=530 num_active_peer=52
- EXT NSS Supported
- idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
- idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
- idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
- idx 8 req 9 num_units 1 num_unit_info 8 unit size 819200 actual units 1
- ol_ath_alloc_host_mem_chunk req_id 9 idx 3 num_units 1 unit_len 819200,
- idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 531
- ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 531 unit_len 744,
- idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
- ol_ath_alloc_host_mem_chunk req_id 6 idx 5 num_units 35 unit_len 3072,
- idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
- ol_ath_alloc_host_mem_chunk req_id 7 idx 6 num_units 1 unit_len 6144,
- idx 6 req 5 num_units 0 num_unit_info 2 unit size 2052 actual units 531
- ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 531 unit_len 2052,
- Support not added yet for Service 91
- Support not added yet for Service 92
- No EXT_MSG send INIT now
- chunk 0 len 13568 requested , ptr 0x8dffc000
- chunk 1 len 54272 requested , ptr 0x8ce10000
- chunk 2 len 217088 requested , ptr 0x8ce80000
- chunk 3 len 819200 requested , ptr 0x8cf00000
- chunk 4 len 395064 requested , ptr 0x8c800000
- chunk 5 len 107520 requested , ptr 0x8cec0000
- chunk 6 len 6144 requested , ptr 0x8ceb6000
- chunk 7 len 1089612 requested , ptr 0x8ca00000
- chunk 8 len 0 requested , ptr 0x0
- ol_ath_service_ready_event[4259] WAPI MBSSID 2
- smart_log_init: Smart logging Enabled buf=ccb10000 (size=65536)
- Version = 16777216 3 status = 0
- ol_ath_connect_htc() WMI is ready
- target uses HTT version 2.2; host uses 2.2
- htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 0
- ol_ath_attach() connect HTC.
- bypasswmi : 0
- ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
- ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
- ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
- ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
- ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
- ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
- ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
- ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
- ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
- ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
- ol_ath_phyerr_attach: called
- OL Resmgr Init-ed
- ieee80211_bsteering_attach: Band steering initialized
- acfg_attach: 3013: Netlink socket created:ce466000
- ol_if_spectral_setup
- SPECTRAL : get_capability not registered
- HAL_CAP_PHYDIAG : Capable
- SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
- SPECTRAL : get_capability not registered
- HAL_CAP_RADAR : Capable
- SPECTRAL : Need to fix the capablity check for SPECTRAL
- (spectral_attach : 242)
- SPECTRAL : get_capability not registered
- HAL_CAP_SPECTRAL_SCAN : Capable
- SPECTRAL : get_tsf64 not registered
- spectral_init_netlink 78 NULL SKB
- Green-AP : Green-AP : Attached
- Green-AP : Attached
- rate power table override is only supported for AR98XX
- ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
- ol_if_dfs_setup: called
- ol_if_dfs_attach: called; ptr=ccfc998c, radar_info=ce46fbd8
- dfs_attach: event log enabled by default
- ol_ath_rtt_meas_report_attach: called
- ol_ath_lowi_wmi_event_attach: called
- >>>> CB Set (null)
- ol_ath_attach() UMAC attach .
- BURSTING enabled by default
- ol_ath_attach: Set global_ic[1] ..ptr:bf3f153c
- ath_lowi_if_netlink_init LOWI Netlink successfully created
- osif_wrap_attach:444 osif wrap attached
- osif_wrap_devt_init:405 osif wrap dev table init done
- Wrap Attached: Wrap_com =ce81cc00 ic->ic_wrap_com=ce81cc00 &wrap_com->wc_devt=ce81cc00
- __ol_ath_attach: needed_headroom reservation 60
- ol_ath_thermal_mitigation_attach: --
- ol_ath_ahb_probe num_radios=0, wifi_radios[0].sc = cd4404c0 wifi_radio_type = 2
- ath_sysfs_diag_init: diag_fsattr
- *********** IPQ4019 *************Wifi1 CPU frequency 250000000
- hif_target_sync_ahb: Got FW signal, retries = 1hif_ahb_enable_bus: X - hif_type = 0xd, target_type = 0xbhif_config_ce: ce_init donehif_config_ce: X, ret = 0hif_set_hia: Ehif_pci_bus_configure: hif_set_hia donehif_configure_irq: Ehif_enable: X OKhif_napi_create: NAPI structures initializedhif_napi_create: NAPI id 6 created for pipe 5qca_napi_create: napi instance 32 created on pipe 4
- hif_napi_event: received evnt: CONF cmd; v = 1 (state=0x1)hif_napi_event: setting configuration to ON
- __ol_ath_attach() Allocated scn ccb404c0
- __ol_ath_attach: dev name wifi1
- ol_ath_attach interface_id 1
- ol_target_init() BMI inited.
- ol_target_init() BMI Get Target Info.
- Chip id: 0xb, chip version: 0x1000000
- CE WAR Disabled
- NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
- ol_target_init() configure Target .
- Target Version is 1000000
- Flash Download Address c0000
- ol_transfer_bin_file: flash data file defined
- ol_transfer_bin_file[3815] Get Caldata for wifi1.
- qc98xx_verify_checksum: flash checksum passed: 0x4ef6
- ol_transfer_bin_file 3881: Download Flash data len 12064
- Board extended Data download address: 0x0
- Board data initialized
- ol_ath_download_firmware: Download OTP, flash download ADDRESS 0xc0000
- Selecting OTP binary for CHIP Version -1065432708
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 0, Download data len 4676
- First OTP send param 8000
- ol_ath_download_firmware :First OTP download and Execute is good address:0x4400 return param 4660
- ol_ath_download_firmware:##Board Id 17 , CHIP Id 0
- ol_ath_download_firmware: BOARDDATA DOWNLOAD TO address 0xc0000
- wifi1: Selecting board data file name boardData_1_0_IPQ4019_Y9803_wifi1.bin
- ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=IPQ4019/hw.1/boardData_1_0_IPQ4019_Y9803_wifi1.bin
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 3, Download data len 12064
- Board extended Data download address: 0x0
- ol_ath_download_firmware: Using 0x1234 for the remainder of init
- Selecting OTP binary for CHIP Version -1065432708
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 0, Download data len 4676
- [Flash] : Ignore Module param
- Second otp download Param 10000
- ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
- Mission mode: Firmware CHIP Version -1065432708
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_swap_wlan_memory_expansion: length:189775 size_left:189795 dma_size_left:262144 fw_temp:d1dd2004 fw_entry_size:189799
- ol_swap_wlan_memory_expansion: dma_virt_addr :d1d91000 fw_temp: d1dd2008 length: 189775
- Swap: bytes_left to copy: fw:16; dma_page:72369
- ol_swap_wlan_memory_expansion: length:0 size_left:12 dma_size_left:72369 fw_temp:d1e0055b fw_entry_size:189799
- Swap: wrong length read:0
- [wifi0] FWLOG: [57563] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x96c, 0x0 )
- [wifi0] FWLOG: [57590] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c,
- ol_swap_wlan_memory_expansion: Swap total_bytes copied: 189775 Target address 418320
- 0x0<6>scn=ccb404c0 target_write_addr=418320 seg_info=cdcf0c10
- ol_transfer_swap_struct:Code swap structure successfully downloaded for bin type =2
- bin_filename=IPQ4019/hw.1/athwlan.bin swap_filename=/lib/firmware/IPQ4019/hw.1/athwlan.codeswap.bin
- ol_transfer_bin_file: Downloading firmware file: IPQ4019/hw.1/athwlan.bin
- ath10k_ahb a800000.wifi: Direct firmware load failed with error 0
- ath10k_ahb a800000.wifi: Falling back to user helper
- ath10k_ahb a800000.wifi: Firmware loaded from user helper succesfully
- ol_transfer_bin_file 3678: downloading file 1, Download data len 379784
- )
- [wifi0] FWLOG: [57590] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi0] FWLOG: [57590] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi0] FWLOG: [57590] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi0] FWLOG: [57699] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x0, 0x12 )
- [wifi0] FWLOG: [57699] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x0, 0x12, 0x10, 0x12 )
- ol_target_init() Download FW done.
- ERROR: No wifi_dump dts node available in the dts entry file
- ol_ath_attach() WMI attached. wmi_handle cd1a6000
- wmi_unified_register_event_handler: Event id 62 is unavailable
- +htc_create .. HIF :ccef0000-htc_create: (0xceb3f800)
- htc_wmi_init() HT Create . ceb3f800
- htc_wmi_init 7762 host_enable 0 nss_nwifi_offload 0
- ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
- OL_ACBKMinfree : 0
- OL_ACBEMinfree : 0
- OL_ACVIMinfree : 0
- OL_ACVOMinfree : 0
- hif_enable_fastpath, Enabling fastpath mode
- +HWT
- hif_completion_thread_startup: pipe_num:0 pipe_info:0xccef4578hif_completion_thread_startup: pipe_num:3 pipe_info:0xccef4650hif_completion_thread_startup: pipe_num:4 pipe_info:0xccef4698
- -HWT
- Startup Mode-0 set
- htt_peer_map_timer_init Enter pdev cc020000 hrtimer cc024948
- htt_alloc_peer_map_mem : Alloc Success : host q vaddr cc068000 paddr 8c068000
- htt_alloc_peer_map_mem : Flush Interval Configured to 256 pkts
- ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from cbca0000
- Firmware_Build_Number:66
- host/RAM_fw Build Ver Mismatch: H:0x32, F:0x42 !
- FW wireless modes: 0x1f9001
- num_rf_chain:0x00000002 ht_cap_info:0x0000085b vht_cap_info:0x339959b2 vht_supp_mcs:0x0000fffa
- wmi_service_coex_gpio 0, wmi_service_4_wire_coex_support 0, coex_version 0
- Sending Ext resource cfg: HOST PLATFORM as 0
- fw_feature_bitmap as 50 to TGT
- ol_ath_service_ready_event: tt_support: 1
- ol_ath_service_ready_event: periodic_chan_stats: 1
- ol_ath_service_ready_event: sw_cal_support_check_flag: 1
- Peer Caching Enabled ; num_peers = 530, num_active_peers = 52 num_tids = 104, num_vdevs = 17
- Airtime Fairness: num_peers=530 num_active_peer=52
- EXT NSS Supported
- idx 1 req 2 num_units 1 num_unit_info 12 unit size 256 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 2 idx 0 num_units 53 unit_len 256,
- idx 2 req 3 num_units 1 num_unit_info 12 unit size 1024 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 3 idx 1 num_units 53 unit_len 1024,
- idx 3 req 4 num_units 1 num_unit_info 12 unit size 4096 actual units 53
- ol_ath_alloc_host_mem_chunk req_id 4 idx 2 num_units 53 unit_len 4096,
- idx 8 req 9 num_units 1 num_unit_info 8 unit size 819200 actual units 1
- ol_ath_alloc_host_mem_chunk req_id 9 idx 3 num_units 1 unit_len 819200,
- idx 0 req 1 num_units 0 num_unit_info 2 unit size 744 actual units 531
- ol_ath_alloc_host_mem_chunk req_id 1 idx 4 num_units 531 unit_len 744,
- idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35
- ol_ath_alloc_host_mem_chunk req_id 6 idx 5 num_units 35 unit_len 3072,
- idx 5 req 7 num_units 1 num_unit_info 0 unit size 6144 actual units 1
- ol_ath_alloc_host_mem_chunk req_id 7 idx 6 num_units 1 unit_len 6144,
- idx 6 req 5 num_units 0 num_unit_info 2 unit size 2052 actual units 531
- ol_ath_alloc_host_mem_chunk req_id 5 idx 7 num_units 531 unit_len 2052,
- Support not added yet for Service 91
- Support not added yet for Service 92
- No EXT_MSG send INIT now
- chunk 0 len 13568 requested , ptr 0x8cbe0000
- chunk 1 len 54272 requested , ptr 0x8bd00000
- chunk 2 len 217088 requested , ptr 0x8bd40000
- chunk 3 len 819200 requested , ptr 0x8be00000
- chunk 4 len 395064 requested , ptr 0x8bd80000
- chunk 5 len 107520 requested , ptr 0x8bd20000
- chunk 6 len 6144 requested , ptr 0x8bec8000
- chunk 7 len 1089612 requested , ptr 0x8b800000
- chunk 8 len 0 requested , ptr 0x0
- ol_ath_service_ready_event[4259] WAPI MBSSID 2
- smart_log_init: Smart logging Enabled buf=cb910000 (size=65536)
- Version = 16777216 3 status = 0
- ol_ath_connect_htc() WMI is ready
- target uses HTT version 2.2; host uses 2.2
- htt_h2t_frag_desc_bank_cfg_msg - HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG sent to FW for radio ID = 1
- ol_ath_attach() connect HTC.
- bypasswmi : 0
- ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
- Add VHT80 channel: 5210
- Add VHT80 channel: 5775
- Skipping VHT80 channel 5825
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
- ol_ath_phyerr_attach: called
- OL Resmgr Init-ed
- ieee80211_bsteering_attach: Band steering initialized
- acfg_attach: Offload using existing sock ce466000
- ol_if_spectral_setup
- SPECTRAL : get_capability not registered
- HAL_CAP_PHYDIAG : Capable
- SPECTRAL : Need to fix the capablity check for RADAR (spectral_attach : 237)
- SPECTRAL : get_capability not registered
- HAL_CAP_RADAR : Capable
- SPECTRAL : Need to fix the capablity check for SPECTRAL
- (spectral_attach : 242)
- SPECTRAL : get_capability not registered
- HAL_CAP_SPECTRAL_SCAN : Capable
- SPECTRAL : get_tsf64 not registered
- spectral_init_netlink 78 NULL SKB
- Green-AP : Green-AP : Attached
- Green-AP : Attached
- rate power table override is only supported for AR98XX
- ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna.
- ol_if_dfs_setup: called
- ol_if_dfs_attach: called; ptr=cbde998c, radar_info=ce46fbd8
- dfs_attach: event log enabled by default
- ol_ath_rtt_meas_report_attach: called
- ol_ath_lowi_wmi_event_attach: called
- >>>> CB Set (null)
- ol_ath_attach() UMAC attach .
- BURSTING enabled by default
- ol_ath_attach: Set global_ic[2] ..ptr:bf3f153c
- ath_lowi_if_netlink_init Incremented LOWI netlink ref count: 2
- osif_wrap_attach:444 osif wrap attached
- osif_wrap_devt_init:405 osif wrap dev table init done
- Wrap Attached: Wrap_com =ce57b200 ic->ic_wrap_com=ce57b200 &wrap_com->wc_devt=ce57b200
- __ol_ath_attach: needed_headroom reservation 60
- ol_ath_thermal_mitigation_attach: --
- ol_ath_ahb_probe num_radios=1, wifi_radios[1].sc = ccb404c0 wifi_radio_type = 2
- ath_sysfs_diag_init: diag_fsattr
- ath_ol_pci: (Atheros/multi-bss)
- Switching to Tx Mode-1 Threshold 280
- [wifi1] FWLOG: [59994] WAL_DBGID_RST_STATS ( 0x1, 0x1, 0x1464, 0x0 )
- [wifi1] FWLOG: [60022] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [60022] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [60022] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [60022] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
- [wifi1] FWLOG: [60120] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0xa10, 0x160, 0x10, 0x0 )
- [wifi1] FWLOG: [60120] WAL_DBGID_PDEV_INFO_PRINT ( 0x3a, 0x10, 0x0, 0x10, 0x12 )
- isCountryCodeValid: EEPROM regdomain 0x0
- ol_regdmn_init_channels: !avail mode 0x680c (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140
- ol_regdmn_init_channels: !avail mode 0x680c (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x680c (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x680c (0x1000) flags 0x10100
- ol_regdmn_init_channels: !avail mode 0x680c (0x8000) flags 0x20100
- ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100
- ol_regdmn_init_channels: !avail mode 0x680c (0x20000) flags 0x100100
- ol_regdmn_init_channels: !avail mode 0x680c (0x40000) flags 0x200100
- ol_regdmn_init_channels: !avail mode 0x680c (0x80000) flags 0x400100
- ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100
- ol_regdmn_init_channels: !avail mode 0x680c (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x680c (0x400000) flags 0x8000100
- isCountryCodeValid: EEPROM regdomain 0x0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
- Add VHT80 channel: 5210
- Add VHT80 channel: 5290
- Add VHT80 channel: 5530
- Skipping VHT80 channel 5580
- Skipping VHT80 channel 5660
- Skipping VHT80 channel 5680
- Skipping VHT80 channel 5700
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x200000) flags 0x4000100
- ol_regdmn_init_channels: !avail mode 0x1f9001 (0x400000) flags 0x8000100
- freq=58
- freq=106
- wlan_vap_create : enter. devhandle=0xcd4404c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
- send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 04:d9:f5:de:c3:b0:
- ieee80211_mbo_vattach:MBO Initialized
- ieee80211_oce_vattach: OCE Initialized
- wlan_vap_create : exit. devhandle=0xcd4404c0, vap=0xcdde8000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- Enabling TX checksum bit for the vap ath0 features 4000
- Enabling SG bit for the vap ath0 features 4000
- Enabling SG bit for the vap ath0 features 4000
- Enabling TSO bit for the vap ath0 features 4000
- Enabling LRO bit for the vap ath0 features 4000
- VAP device ath0 created osifp: (cf173cc0) os_if: (cdde8000)
- [wifi1] FWLOG: [62584] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x199, 0x130, 0x30, 0x0 )
- [wifi1] FWLOG: [62584] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x30, 0x0, 0x30, 0x0 )
- Switching to Tx Mode-1 Threshold 280
- [wifi0] FWLOG: [62491] WAL_DBGID_PDEV_INFO_PRINT ( 0x37, 0x199, 0x130, 0x0, 0x32 )
- wlan_vap_create : enter. devhandle=0xccb404c0, opmode=IEEE80211_M_HOSTAP, flags=0x1
- send_vdev_create_cmd_non_tlv: ID = 0 Type = 1, Subtype = 0 VAP Addr = 04:d9:f5:de:c3:b4:
- ieee80211_mbo_vattach:MBO Initialized
- ieee80211_oce_vattach: OCE Initialized
- wlan_vap_create : exit. devhandle=0xccb404c0, vap=0xcddf8000, opmode=IEEE80211_M_HOSTAP, flags=0x1.
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- Enabling TX checksum bit for the vap ath1 features 4000
- Enabling SG bit for the vap ath1 features 4000
- Enabling SG bit for the vap ath1 features 4000
- Enabling TSO bit for the vap ath1 features 4000
- Enabling LRO bit for the vap ath1 features 4000
- VAP device ath1 created osifp: (cdcc04c0) os_if: (cddf8000)
- UBIFS: background thread "ubifs_bgt0_5" started, PID 345
- UBIFS: recovery needed
- UBIFS: recovery completed
- UBIFS: mounted UBI device 0, volume 5, name "jffs2"
- UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- UBIFS: FS size: 21712896 bytes (20 MiB, 171 LEBs), journal size 3174400 bytes (3 MiB, 25 LEBs)
- UBIFS: reserved for root: 0 bytes (0 KiB)
- UBIFS: media format: w4/r0 (latest is w4/r0), UUID D798A4A5-85DA-4666-A755-EAEA89E2DDC9, small LPT model
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0x08a00000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- xhci-hcd xhci-hcd.1.auto: irq 168, io mem 0x06000000
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
- xhci-hcd xhci-hcd.1.auto: remove, state 4
- usb usb4: USB disconnect, device number 1
- xhci-hcd xhci-hcd.1.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
- xhci-hcd xhci-hcd.1.auto: remove, state 1
- usb usb3: USB disconnect, device number 1
- xhci-hcd xhci-hcd.1.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.1.auto: Host controller not halted, aborting reset.
- xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
- xhci-hcd xhci-hcd.0.auto: remove, state 1
- usb usb2: USB disconnect, device number 1
- xhci-hcd xhci-hcd.0.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
- xhci-hcd xhci-hcd.0.auto: remove, state 4
- usb usb1: USB disconnect, device number 1
- xhci-hcd xhci-hcd.0.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.0.auto: Host controller not halted, aborting reset.
- xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0x08a00000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- xhci-hcd xhci-hcd.1.auto: irq 168, io mem 0x06000000
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
- device eth1 entered promiscuous mode
- device ath0 entered promiscuous mode
- device ath1 entered promiscuous mode
- IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
- usb 3-1: new high-speed USB device number 2 using xhci-hcd
- set TXBF_SND_PERIOD: value 100 wmi_status 0
- wmi_dbg_cfg_send: mod[0]00000000 dbgcfg50000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000, cfgvalid[2] 70000000
- set TXBF_SND_PERIOD: value 100 wmi_status 0
- DCS: ol_ath_set_config_param dcs enable value 1 return value 0
- wmi_dbg_cfg_send: mod[0]00000000 dbgcfg50000000 cfgvalid[0] 00000000 cfgvalid[1] 00000000, cfgvalid[2] 70000000
- [wifi0] FWLOG: [68844] WAL_DBGID_RST_STATS ( 0x6, 0x2, 0x96c, 0x0 )
- [wifi0] FWLOG: [68844] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3bc )
- br0: port 1(eth1) entered listening state
- br0: port 1(eth1) entered listening state
- [wifi1] FWLOG: [68964] WAL_DBGID_RST_STATS ( 0x6, 0x2, 0x1464, 0x0 )
- [wifi1] FWLOG: [68965] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3b2 )
- br0: port 1(eth1) entered learning state
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1
- [DEBUG] vap-0(ath0):set SIOC80211NWID, 13 characters
- DES SSID SET=AerialHD_2.4G
- br0: port 2(ath0) entered listening state
- br0: port 2(ath0) entered listening state
- 8021q: adding VLAN 0 to HW filter on device ath0
- br0: topology change detected, propagating
- br0: port 1(eth1) entered forwarding state
- IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
- br0: port 2(ath0) entered learning state
- ieee80211_ioctl_siwmode: imr.ifm_active=131712, new mode=3, valid=1
- [UNSPECIFIED] ol_scan_unregister_event_handler: Failed to unregister evhandler=bf32c8f8 arg=ccb80000
- osif_vap_stop: Scan in progress.. Cancelling it. vap: 0xcdde8000
- br0: port 2(ath0) entered disabled state
- DEVICE IS DOWN ifname=ath0
- DEVICE IS DOWN ifname=ath0
- xhci-hcd xhci-hcd.1.auto: remove, state 4
- usb usb4: USB disconnect, device number 1
- xhci-hcd xhci-hcd.1.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.1.auto: USB bus 4 deregistered
- xhci-hcd xhci-hcd.1.auto: remove, state 1
- usb usb3: USB disconnect, device number 1
- usb 3-1: USB disconnect, device number 2
- br0: port 2(ath0) entered listening state
- br0: port 2(ath0) entered listening state
- 8021q: adding VLAN 0 to HW filter on device ath0
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 1 mu bfer 0 impl bf 0 sounding dim 1
- su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1
- [DEBUG] vap-0(ath1):set SIOC80211NWID, 7 characters
- DES SSID SET=ASUS_5G
- ME Pool succesfully initialized vaddr - cada0000 paddr - 0
- num_elems = 1424 buf_size - 64 pool_size = 102528
- Enable MCAST_TO_UCAST
- br0: port 3(ath1) entered listening state
- br0: port 3(ath1) entered listening state
- 8021q: adding VLAN 0 to HW filter on device ath1
- send_wmm_update_cmd_non_tlv:
- [UNSPECIFIED] ol_scan_unregister_event_handler: Failed to unregister evhandler=bf32c8f8 arg=cb980000
- osif_vap_init: Scan in progress.. Cancelling it. vap: 0xcddf8000
- send_wmm_update_cmd_non_tlv:
- [UNSPECIFIED] ol_scan_unregister_event_handler: Failed to unregister evhandler=bf32c8f8 arg=cb980000
- osif_vap_init: Scan in progress.. Cancelling it. vap: 0xcddf8000
- ieee80211_ioctl_siwmode: imr.ifm_active=66176, new mode=3, valid=1
- [UNSPECIFIED] ol_scan_unregister_event_handler: Failed to unregister evhandler=bf32c8f8 arg=cb980000
- osif_vap_stop: Scan in progress.. Cancelling it. vap: 0xcddf8000
- br0: port 3(ath1) entered disabled state
- DEVICE IS DOWN ifname=ath1
- DEVICE IS DOWN ifname=ath1
- br0: port 3(ath1) entered listening state
- br0: port 3(ath1) entered listening state
- 8021q: adding VLAN 0 to HW filter on device ath1
- br0: port 2(ath0) entered learning state
- br0: port 3(ath1) entered learning state
- ---- ACS CALCULATE ----
- Chan 1 pre_param 0 param 0
- Chan 6 pre_param 0 param 0
- Chan 11 pre_param 0 param 0
- Best Channel Selected 1
- OL vap_start +
- VDEV START
- OL vap_start -
- ol_ath_vap_set_param: Now supported MGMT RATE is 1000(kbps) and rate code: 0x43
- br0: topology change detected, propagating
- br0: port 2(ath0) entered forwarding state
- ol_vdev_start_resp_ev for vap 0 (cdce0000)
- send_wmm_update_cmd_non_tlv:
- su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1
- send_vdev_up_cmd_non_tlv for vap 0
- Beacon mode set to staggered. Cannot enable FD
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- br0: topology change detected, propagating
- br0: port 3(ath1) entered forwarding state
- xhci-hcd xhci-hcd.1.auto: Timeout while waiting for configure endpoint command
- xhci-hcd xhci-hcd.1.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.1.auto: Host controller not halted, aborting reset.
- xhci-hcd xhci-hcd.1.auto: USB bus 3 deregistered
- xhci-hcd xhci-hcd.0.auto: remove, state 4
- usb usb2: USB disconnect, device number 1
- xhci-hcd xhci-hcd.0.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
- xhci-hcd xhci-hcd.0.auto: remove, state 4
- usb usb1: USB disconnect, device number 1
- xhci-hcd xhci-hcd.0.auto: Host not halted after 16000 microseconds.
- xhci-hcd xhci-hcd.0.auto: Host controller not halted, aborting reset.
- xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- xhci-hcd xhci-hcd.0.auto: irq 164, io mem 0x08a00000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- ---- ACS CALCULATE ----
- Chan 36 pre_param 0 param 0
- Chan 40 pre_param 0 param 0
- Chan 44 pre_param 0 param 0
- Chan 48 pre_param 0 param 0
- Selected dot11 channel 36
- OL vap_start +
- VDEV START
- OL vap_start -
- ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3
- xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- xhci-hcd xhci-hcd.1.auto: irq 168, io mem 0x06000000
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 1 port detected
- xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
- ol_vdev_start_resp_ev for vap 0 (cd1a6000)
- send_wmm_update_cmd_non_tlv:
- su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 1
- send_vdev_up_cmd_non_tlv for vap 0
- Beacon mode set to staggered. Cannot enable FD
- __ieee80211_smart_ant_init: Smart Antenna functions are not registered !!!
- usb 3-1: new high-speed USB device number 2 using xhci-hcd
- GobiNet: 2011-07-29-1026
- usbcore: registered new interface driver GobiNet
- usbcore: registered new interface driver cdc_acm
- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- usb-storage 3-1:1.0: USB Mass Storage device detected
- scsi0 : usb-storage 3-1:1.0
- usbcore: registered new interface driver usb-storage
- ATM is re-allocating airtime because 84:7a:b6:06:25:7a is now active
- ATM is re-allocating airtime because 84:e3:42:e3:41:46 is now active
- scsi 0:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- scsi 0:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0
- scsi 0:0:0:1: Attached scsi generic sg1 type 5
- sd 0:0:0:0: [sda] 15695871 512-byte logical blocks: (8.03 GB/7.48 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
- sd 0:0:0:0: [sda] No Caching mode page found
- sd 0:0:0:0: [sda] Assuming drive cache: write through
- sd 0:0:0:0: [sda] No Caching mode page found
- sd 0:0:0:0: [sda] Assuming drive cache: write through
- sda: sda1
- sd 0:0:0:0: [sda] No Caching mode page found
- sd 0:0:0:0: [sda] Assuming drive cache: write through
- sd 0:0:0:0: [sda] Attached SCSI removable disk
- sr0: scsi3-mmc drive: 48x/48x tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 0:0:0:1: Attached scsi CD-ROM sr0
- [UNSPECIFIED] vap-0(ath0): [84:e3:42:9e:83:0b]deny assoc request, no ht caps in pure 802.11n mode
- ATM is re-allocating airtime because 84:7a:b6:06:25:7a is now inactive
- EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr
- ol_ath_vap_set_param: Now supported MCAST RATE is 6000(kbps) and rate code: 0x3
- ol_ath_vap_set_param: Now supported MCAST RATE is 1000(kbps) and rate code: 0x43
- ATM is re-allocating airtime because 84:e3:42:9e:83:0b is now active
- client 84:e3:42:e3:41:46 connected to SSID Others has 50% airtime
- client 84:e3:42:9e:83:0b connected to SSID Others has 50% airtime
- usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [UNSPECIFIED] vap-0(ath0): [84:e3:42:e3:9c:fe]deny assoc request, no ht caps in pure 802.11n mode
- cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.
- cdc_acm 1-1:1.2: ttyACM0: USB ACM device
- cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.
- cdc_acm 1-1:1.4: ttyACM1: USB ACM device
- GobiNet 1-1:1.6 usb0: register 'GobiNet' at usb-xhci-hcd.0.auto-1, GobiNet Ethernet Device, e6:a2:9e:fd:0a:17
- MMACRO TEST = 0
- cdrom: Uniform CD-ROM driver unloaded
- ATM is re-allocating airtime because 84:7a:b6:06:25:7a is now active
- ATM is re-allocating airtime because 84:e3:42:e3:9c:fe is now active
- [DEBUG] vap-0(ath0):ieee80211_recv_asreq Disabling LDPC for better performance
- ATM is re-allocating airtime because ca:90:5d:a9:e5:b2 is now active
- client 84:e3:42:e3:41:46 connected to SSID Others has 20% airtime
- client 84:e3:42:9e:83:0b connected to SSID Others has 20% airtime
- client 84:7a:b6:06:25:7a connected to SSID Others has 20% airtime
- client 84:e3:42:e3:9c:fe connected to SSID Others has 20% airtime
- client ca:90:5d:a9:e5:b2 connected to SSID Others has 20% airtime
- Switching to Tx Mode-1 Threshold 0
- Switching to Tx Mode-1 Threshold 280
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement