Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===================================================================
- MT7621 stage1 code Nov 5 2019 00:23:11 (ASIC)
- CPU=50000000 HZ BUS=16666666 HZ
- ==================================================================
- RALINK_GPIOMODE = ad428
- GPIO0~31 DIR = 40
- GPIO0~31 DATA = fff41517
- Set gpio_4,3 direction to input
- Set gpio_10,6 direction to output
- GPIO0~31 DIR = 440
- GPIO0~31 DATA = fff41517
- Set gpio_6 output value to 0
- Set gpio_10 output value to 1
- GPIO0~31 DATA = fff41517
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11100000
- 3PLL mode + External loopback
- === XTAL-40Mhz ===dram_speed=:1200
- === DDR-1200Mhz ===
- PLL4 FB_DL: 0xc, 1/0 = 556/468 31000000
- PLL2 FB_DL: 0x11, 1/0 = 639/385 45000000
- PLL3 FB_DL: 0x1e, 1/0 = 554/470 79000000
- do DDR setting..[00320381]
- Apply DDR3 Setting...(use customer AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
- 000E:| 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
- 000F:| 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0
- 0010:| 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
- 0011:| 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- DRAMC_DQSCTL1[0e0]=13000000
- DRAMC_DQSGCTL[124]=80000033
- rank 0 coarse = 15
- rank 0 fine = 64
- B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0
- opt_dle value:10
- DRAMC_DDR2CTL[07c]=C287222D
- DRAMC_PADCTL4[0e4]=000022B3
- DRAMC_DQIDLY1[210]=0C0A0907
- DRAMC_DQIDLY2[214]=06080907
- DRAMC_DQIDLY3[218]=0B080707
- DRAMC_DQIDLY4[21c]=0A080A09
- DRAMC_R0DELDLY[018]=00001D1E
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 7 8 9 11 6 9 7 6 7 6
- 10 | 8 9 9 9 8 8
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =30 DQS1 = 29
- ==================================================================
- bit DQS0 bit DQS1
- 0 (1~59)30 8 (2~56)29
- 1 (1~58)29 9 (1~56)28
- 2 (1~58)29 10 (1~57)29
- 3 (1~58)29 11 (1~54)27
- 4 (1~58)29 12 (2~57)29
- 5 (1~60)30 13 (1~55)28
- 6 (1~58)29 14 (1~58)29
- 7 (1~60)30 15 (1~53)27
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 7 9 10 12 7 9 8 6 7 7
- 10 | 8 11 9 10 8 10
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff2000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- DQS loop = 14, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[1]=14, finish count=2
- DQ loop=15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- DRAMC_DQODLY1[200]=88888888
- DRAMC_DQODLY2[204]=88888888
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=50000000 HZ BUS=16666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Nov 25 2019 - 01:45:38)
- Board: Ralink APSoC DRAM: 128 MB
- Power on memory test. Memory size= 128 MB...OK!
- relocate_code Pointer at: 87fa4000
- Config XHCI 40M PLL
- Allocate 16 byte aligned buffer: 87fe0130
- Enable NFI Clock
- # MTK NAND # : Use HW ECC
- NAND ID [C8 D1 80 95 40]
- Device found in MTK table, ID: c8d1, EXT_ID: 809540
- Support this Device in MTK table! c8d1
- select_chip
- [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
- Signature matched and data read!
- load_fact_bbt success 1023
- load fact bbt success
- [mtk_nand] probe successfully!
- mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
- ..============================================
- Ralink UBoot Version: 5.0.0.0
- --------------------------------------------
- ASIC MT7621A DualCore (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: NAND Flash
- Date:Nov 25 2019 Time:01:45:38
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- #Reset_MT7530
- set LAN/WAN WLLLL
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- Booting System 1
- ..ranand_erase: start:80000, len:20000
- ..Done!
- done
- 3: System Boot system code via Flash.
- ## Booting image at bc200000 ...
- Image Name: MIPS OpenWrt Linux-3.10.14
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 3389967 Bytes = 3.2 MB
- Load Address: 81001000
- Entry Point: 81436040
- .................................................... Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- commandline uart_en=0 factory_mode=0
- No initrd
- ## Transferring control to Linux (at address 81436040) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- LINUX started...
- THIS IS ASIC
- SDK 5.0.S.0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.10.14 (jenkins@7f34258e3bac) (gcc version 4.8.5 (crosstool-NG crosstool-ng-1.22.0) ) #1 MiWiFi-RM2100-1.0.11 SMP Mon Nov 25 01:53:32 UTC 2019
- [ 0.000000]
- [ 0.000000] The CPU feqenuce set to 880 MHz
- [ 0.000000] GCMP present
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] Software DMA cache coherency
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00000000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x07ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
- [ 0.000000] Detected 3 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @81843000 s6912 r8192 d13568 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock5 uart_en=0 factory_mode=0
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00050000
- [ 0.000000] Readback ErrCtl register=00050000
- [ 0.000000] allocated 262144 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 122132k/131072k available (4357k kernel code, 8940k reserved, 1127k data, 1612k init, 0k highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] console [ttyS1] enabled
- [ 0.130000] Calibrating delay loop... 577.53 BogoMIPS (lpj=2887680)
- [ 0.190000] pid_max: default: 32768 minimum: 301
- [ 0.190000] Mount-cache hash table entries: 512
- [ 0.200000] Initializing cgroup subsys memory
- [ 0.200000] launch: starting cpu1
- [ 0.210000] launch: cpu1 gone!
- [ 0.210000] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.210000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.210000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.210000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.270000] Synchronize counters for CPU 1: done.
- [ 0.280000] launch: starting cpu2
- [ 0.280000] launch: cpu2 gone!
- [ 0.280000] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.280000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.280000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.280000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.340000] Synchronize counters for CPU 2: done.
- [ 0.350000] launch: starting cpu3
- [ 0.350000] launch: cpu3 gone!
- [ 0.350000] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.350000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.350000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.350000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.410000] Synchronize counters for CPU 3: done.
- [ 0.420000] Brought up 4 CPUs
- [ 0.420000] devtmpfs: initialized
- [ 0.420000] NET: Registered protocol family 16
- [ 0.660000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.660000] PCIE PHY initialize
- [ 0.660000] ***** Xtal 40MHz *****
- [ 0.670000] start MT7621 PCIe register access
- [ 1.120000] RALINK_RSTCTRL = 7000000
- [ 1.130000] RALINK_CLKCFG1 = 73ffeff8
- [ 1.130000]
- [ 1.130000] *************** MT7621 PCIe RC mode *************
- [ 1.510000] pcie_link status = 0x3
- [ 1.510000] RALINK_RSTCTRL= 7000000
- [ 1.520000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
- [ 1.530000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- [ 1.530000] PCIE0 enabled
- [ 1.530000] PCIE1 enabled
- [ 1.540000] interrupt enable status: 300000
- [ 1.540000] Port 1 N_FTS = 1b105000
- [ 1.540000] Port 0 N_FTS = 1b105000
- [ 1.550000] config reg done
- [ 1.550000] init_rt2880pci done
- [ 1.570000] bio: create slab <bio-0> at 0
- [ 1.580000] SCSI subsystem initialized
- [ 1.580000] PCI host bridge to bus 0000:00
- [ 1.590000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.600000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 1.600000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.610000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.620000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.630000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.630000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.640000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.650000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- [ 1.650000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 1.660000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
- [ 1.670000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 1.680000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.680000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.690000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff]
- [ 1.690000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 1.700000] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- [ 1.710000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
- [ 1.710000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- [ 1.720000] BAR0 at slot 0 = 0
- [ 1.720000] bus=0x0, slot = 0x0
- [ 1.720000] res[0]->start = 0
- [ 1.730000] res[0]->end = 0
- [ 1.730000] res[1]->start = 60200000
- [ 1.730000] res[1]->end = 6020ffff
- [ 1.740000] res[2]->start = 0
- [ 1.740000] res[2]->end = 0
- [ 1.740000] res[3]->start = 0
- [ 1.740000] res[3]->end = 0
- [ 1.750000] res[4]->start = 0
- [ 1.750000] res[4]->end = 0
- [ 1.750000] res[5]->start = 0
- [ 1.760000] res[5]->end = 0
- [ 1.760000] BAR0 at slot 1 = 0
- [ 1.760000] bus=0x0, slot = 0x1
- [ 1.760000] res[0]->start = 0
- [ 1.770000] res[0]->end = 0
- [ 1.770000] res[1]->start = 60210000
- [ 1.770000] res[1]->end = 6021ffff
- [ 1.780000] res[2]->start = 0
- [ 1.780000] res[2]->end = 0
- [ 1.780000] res[3]->start = 0
- [ 1.790000] res[3]->end = 0
- [ 1.790000] res[4]->start = 0
- [ 1.790000] res[4]->end = 0
- [ 1.790000] res[5]->start = 0
- [ 1.800000] res[5]->end = 0
- [ 1.800000] bus=0x1, slot = 0x0, irq=0x4
- [ 1.800000] res[0]->start = 60000000
- [ 1.810000] res[0]->end = 600fffff
- [ 1.810000] res[1]->start = 0
- [ 1.810000] res[1]->end = 0
- [ 1.820000] res[2]->start = 0
- [ 1.820000] res[2]->end = 0
- [ 1.820000] res[3]->start = 0
- [ 1.830000] res[3]->end = 0
- [ 1.830000] res[4]->start = 0
- [ 1.830000] res[4]->end = 0
- [ 1.830000] res[5]->start = 0
- [ 1.840000] res[5]->end = 0
- [ 1.840000] bus=0x2, slot = 0x1, irq=0x18
- [ 1.840000] res[0]->start = 60100000
- [ 1.850000] res[0]->end = 601fffff
- [ 1.850000] res[1]->start = 0
- [ 1.850000] res[1]->end = 0
- [ 1.860000] res[2]->start = 0
- [ 1.860000] res[2]->end = 0
- [ 1.860000] res[3]->start = 0
- [ 1.870000] res[3]->end = 0
- [ 1.870000] res[4]->start = 0
- [ 1.870000] res[4]->end = 0
- [ 1.870000] res[5]->start = 0
- [ 1.880000] res[5]->end = 0
- [ 1.880000] Switching to clocksource MIPS
- [ 1.890000] cfg80211: Calling CRDA to update world regulatory domain
- [ 1.890000] NET: Registered protocol family 2
- [ 1.890000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 1.890000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- [ 1.890000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 1.890000] TCP: reno registered
- [ 1.890000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 1.890000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 1.890000] NET: Registered protocol family 1
- [ 2.970000] 4 CPUs re-calibrate udelay(lpj = 2924544)
- [ 3.000000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 3.000000] msgmni has been set to 238
- [ 3.010000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 3.010000] io scheduler noop registered (default)
- [ 3.020000] MIWIFI panic notifier registeredreg_int_mask=0, INT_MASK= 0
- [ 3.030000] HSDMA_init
- [ 3.030000]
- [ 3.030000] hsdma_phy_tx_ring0 = 0x00c00000, hsdma_tx_ring0 = 0xa0c00000
- [ 3.040000]
- [ 3.040000] hsdma_phy_rx_ring0 = 0x00c04000, hsdma_rx_ring0 = 0xa0c04000
- [ 3.050000] TX_CTX_IDX0 = 0
- [ 3.050000] TX_DTX_IDX0 = 0
- [ 3.050000] RX_CRX_IDX0 = 3ff
- [ 3.050000] RX_DRX_IDX0 = 0
- [ 3.060000] set_fe_HSDMA_glo_cfg
- [ 3.060000] HSDMA_GLO_CFG = 465
- [ 3.060000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 3.070000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- [ 3.080000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- [ 3.090000] Ralink gpio driver initialized
- [ 3.090000] brd: module loaded
- [ 3.090000] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
- [ 3.100000] Allocate 16 byte aligned buffer: 81720500
- [ 3.110000] Enable NFI Clock
- [ 3.110000] # MTK NAND # : Use HW ECC
- [ 3.110000] NAND ID [C8 D1 80 95 40, 00809540]
- [ 3.120000] NAND ECC: Controller
- [ 3.120000] Device found in MTK table, ID: c8d1, EXT_ID: 809540
- [ 3.130000] Support this Device in MTK table! c8d1
- [ 3.130000] NAND device: Manufacturer ID: 0xc8, Chip ID: 0xd1 (ESMT NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
- [ 3.140000] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
- [ 3.150000] Scanning device for bad blocks
- [ 3.300000] Signature matched and data read!
- [ 3.300000] load_fact_bbt success 1023
- [ 3.300000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.310000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.320000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.330000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.340000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.350000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.360000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.370000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- [ 3.380000] Creating 14 MTD partitions on "MT7621-NAND":
- [ 3.390000] 0x000000000000-0x000007f80000 : "ALL"
- [ 3.400000] 0x000000000000-0x000000080000 : "Bootloader"
- [ 3.400000] 0x000000080000-0x0000000c0000 : "Config"
- [ 3.410000] 0x0000000c0000-0x000000100000 : "Bdata"
- [ 3.410000] 0x000000100000-0x000000140000 : "Factory"
- [ 3.420000] 0x000000140000-0x000000180000 : "crash"
- [ 3.430000] 0x000000180000-0x0000001c0000 : "crash_syslog"
- [ 3.430000] 0x0000001c0000-0x000000200000 : "cfg_bak"
- [ 3.440000] 0x000000200000-0x000000600000 : "kernel0"
- [ 3.450000] 0x000000600000-0x000000a00000 : "kernel1"
- [ 3.450000] 0x000000a00000-0x000002400000 : "rootfs0"
- [ 3.460000] 0x000002400000-0x000003e00000 : "rootfs1"
- [ 3.470000] 0x000003e00000-0x000006400000 : "overlay"
- [ 3.470000] 0x000006400000-0x000007f80000 : "obr"
- [ 3.480000] [mtk_nand] probe successfully!
- [ 3.480000] tun: Universal TUN/TAP device driver, 1.6
- [ 3.490000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.490000] PPP generic driver version 2.4.2
- [ 3.500000] PPP BSD Compression module registered
- [ 3.500000] PPP Deflate Compression module registered
- [ 3.510000] PPP MPPE Compression module registered
- [ 3.510000] NET: Registered protocol family 24
- [ 3.520000] PPTP driver version 0.8.5
- [ 3.520000] ps: can't get major 253
- [ 3.530000] GMAC1_MAC_ADRH -- : 0x00008c53
- [ 3.530000] GMAC1_MAC_ADRL -- : 0xc396111c
- [ 3.530000] Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
- [ 3.540000] GMAC1_MAC_ADRH -- : 0x00008c53
- [ 3.550000] GMAC1_MAC_ADRL -- : 0xc396111c
- [ 3.550000] PROC INIT OK!
- [ 3.560000] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
- [ 3.570000] Netfilter messages via NETLINK v0.30.
- [ 3.570000] nfnl_acct: registering with nfnetlink.
- [ 3.580000] nf_conntrack version 0.5.0 (1908 buckets, 7632 max)
- [ 3.580000] gre: GRE over IPv4 demultiplexor driver
- [ 3.590000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.590000] Type=Restricted Cone
- [ 3.600000] TCP: cubic registered
- [ 3.600000] NET: Registered protocol family 10
- [ 3.610000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.610000] NET: Registered protocol family 17
- [ 3.620000] l2tp_core: L2TP core driver, V2.0
- [ 3.620000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 3.630000] l2tp_netlink: L2TP netlink interface
- [ 3.630000] 8021q: 802.1Q VLAN Support v1.8
- [ 3.640000] Failed to lock mtd reserved0
- [ 3.640000] MIQEF register done
- [ 3.650000] Freeing unused kernel memory: 1612K (8155d000 - 816f0000)
- [ 3.660000] csd: CSD deadlock debugging initiated!
- [ 3.720000] Loading essential drivers...
- [ 3.720000] Press Ctrl+C to enter RAMFS...
- [ 4.750000] Bringup the system...
- [ 4.770000] flag_boot_rootfs=0 mounting /dev/mtd10
- [ 4.780000] UBI: attaching mtd10 to ubi0
- [ 5.020000] UBI: scanning is finished
- [ 5.040000] UBI: attached mtd10 (name "rootfs0", size 26 MiB) to ubi0
- [ 5.050000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 5.050000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 5.060000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 5.070000] UBI: good PEBs: 208, bad PEBs: 0, corrupted PEBs: 0
- [ 5.070000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 5.080000] UBI: max/mean erase counter: 0/0, WL threshold: 4096, image sequence number: 1677508948
- [ 5.090000] UBI: available PEBs: 80, total reserved PEBs: 128, PEBs reserved for bad PEB handling: 20
- [ 5.100000] UBI: background thread "ubi_bgt0d" started, PID 364
- UBI device number 0, total 208 LEBs (26411008 bytes, 25.2 MiB), available 80 LEBs (10158080 bytes, 9.7 MiB), LEB size 126976 bytes (124.0 KiB)
- config core 'version'
- # ROM ver
- option ROM '1.0.11'
- # channel
- option CHANNEL 'release'
- # hardware platform R1AC or R1N etc.
- option HARDWARE 'RM2100'
- # CFE ver
- option UBOOT '1.0.2'
- # Linux Kernel ver
- option LINUX '0.0.1'
- # RAMFS ver
- option RAMFS '0.0.1'
- # SQUASHFS ver
- option SQAFS '0.0.1'
- # ROOTFS ver
- option ROOTFS '0.0.1'
- #build time
- option BUILDTIME 'Mon, 25 Nov 2019 01:44:19 +0000'
- #build timestamp
- option BUILDTS '1574646259'
- #build git tag
- option GTAG 'commit 4326a2ef8777c744648440273c237ff599384b7e'
- mount: mounting proc on /proc failed: Device or resource busy
- mount: mounting sysfs on /sys failed: Device or resource busy
- [ 6.350000] FFFFFF8C:53:FFFFFFC3:FFFFFF96:11:1C
- [ 6.350000] Raeth v3.1 (Tasklet,SkbRecycle)
- [ 6.360000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- [ 6.370000] phy_free_head is 0xc08000!!!
- [ 6.370000] phy_free_tail_phy is 0xc09ff0!!!
- [ 6.380000] txd_pool=a0c10000 phy_txd_pool=00C10000
- [ 6.380000] ei_local->skb_free start address is 0x87e726dc.
- [ 6.390000] free_txd: 00c10010, ei_local->cpu_ptr: 00C10000
- [ 6.390000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 6.400000] ----------------+---------+--------
- [ 6.400000] 0xa0c10000 0x00C10000 0x00C10000
- [ 6.410000]
- [ 6.410000] phy_qrx_ring = 0x00c0a000, qrx_ring = 0xa0c0a000
- [ 6.410000]
- [ 6.410000] phy_rx_ring0 = 0x00c0c000, rx_ring0 = 0xa0c0c000
- [ 6.440000] MT7530 Reset Completed!!
- [ 6.450000] change HW-TRAP to 0x117c8f
- [ 6.460000] set LAN/WAN WLLLL
- [ 6.470000] GMAC1_MAC_ADRH -- : 0x00008c53
- [ 6.470000] GMAC1_MAC_ADRL -- : 0xc396111c
- [ 6.470000] GDMA2_MAC_ADRH -- : 0x00008c53
- [ 6.480000] GDMA2_MAC_ADRL -- : 0xc396111b
- [ 6.480000] eth1: ===> VirtualIF_open
- [ 6.490000] MT7621 GE2 link rate to 1G
- [ 6.490000] CDMA_CSG_CFG = 81000000
- [ 6.490000] GDMA1_FWD_CFG = 20710000
- [ 6.490000] GDMA2_FWD_CFG = 20710000
- - preinit -
- Mon Nov 25 01:53:32 UTC 2019
- - regular preinit -
- /lib/preinit.sh: line 1: pi_indicate_led: not found
- [ 6.720000] UBI: attaching mtd12 to ubi1
- [ 7.070000] UBI: scanning is finished
- [ 7.090000] UBI: attached mtd12 (name "overlay", size 38 MiB) to ubi1
- [ 7.090000] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 7.100000] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 7.110000] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 7.120000] UBI: good PEBs: 304, bad PEBs: 0, corrupted PEBs: 0
- [ 7.120000] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- [ 7.130000] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 663413513
- [ 7.140000] UBI: available PEBs: 0, total reserved PEBs: 304, PEBs reserved for bad PEB handling: 20
- [ 7.150000] UBI: background thread "ubi_bgt1d" started, PID 573
- UBI device number 1, total 304 LEBs (38600704 bytes, 36.8 MiB), available 0 LEBs[ 7.160000] UBIFS: background thread "ubifs_bgt1_0" started, PID 577
- (0 bytes), LEB size 126976 bytes (124.0 KiB)
- [ 7.230000] UBIFS: recovery needed
- [ 7.420000] UBIFS: recovery completed
- [ 7.430000] UBIFS: mounted UBI device 1, volume 0, name "data"
- [ 7.430000] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 7.440000] UBIFS: FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
- [ 7.450000] UBIFS: reserved for root: 1619295 bytes (1581 KiB)
- [ 7.460000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0E99381E-D5F7-4EA3-9D7A-F9056EB96483, small LPT model
- /lib/preinit.sh: line 1: jffs2_not_mounted: not found
- - init -
- [ 8.600000] ra2880stop()...Done
- [ 8.600000] eth1: ===> VirtualIF_close
- [ 8.610000] Free TX/RX Ring Memory!
- init started: BusyBox v1.19.4 (2019-11-25 01:41:48 UTC)
- Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 65 seconds.
- [ 8.850000] MIWIFI crash syslog initialized
- [ 9.750000] Mirror/redirect action on
- [ 9.780000] u32 classifier
- [ 9.780000] input device check on
- [ 9.780000] Actions configured
- [ 9.950000] xt_time: kernel timezone is +0800
- [ 10.210000] ip_set: protocol 6
- [ 10.280000] ctnetlink v0.93: registering with nfnetlink.
- [ 10.300000] ipaccount: ifname [lo] event[5]
- [ 10.310000] ipaccount: ifname [ifb0] event[5]
- [ 10.310000] ipaccount: ifname [eth0] event[5]
- [ 10.310000] ipaccount: ifname [eth1] event[5]
- [ 10.370000] dev_redirect OFF.dev_redirect load success.
- [ 10.900000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
- [ 10.910000] <-- RTMPAllocAdapterBlock, Status=0
- [ 10.920000] ipaccount: ifname [wl1] event[16]
- [ 10.920000] ipaccount: ifname [wl1] event[5]
- [ 12.200000]
- [ 12.200000] == pAd = c1481000, size = 4194304, Status=0 ==
- [ 12.210000] RTMPInitPCIeDevice():device_id=0x7615
- [ 12.210000] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615
- [ 12.220000] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001
- [ 12.230000] AP Driver version-5.0.4.0
- [ 12.230000] RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0
- [ 12.240000] mt7615_init()-->
- [ 12.240000] Use 1st ePAeLNA default bin.
- [ 12.240000] Use 0st /etc_ro/wlan/MT7615E_EEPROM1.bin default bin.
- [ 12.250000] <--mt7615_init()
- [ 12.250000] <-- RTMPAllocTxRxRingMemory, Status=0
- [ 12.260000] ipaccount: ifname [wl0] event[16]
- [ 12.260000] ipaccount: ifname [wl0] event[5]
- [ 12.500000] led=6, on=1, off=4000, blinks,=1, reset=1, time=1
- [ 12.510000] led=8, on=1, off=4000, blinks,=1, reset=1, time=1
- [ 12.530000] led=6, on=4000, off=1, blinks,=1, reset=1, time=1
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: INFO: loading exist /etc/config/network.
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'loopback'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'lo'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'static'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ipaddr '127.0.0.1'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option netmask '255.0.0.0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'lan'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'eth0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option type 'bridge'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'static'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ipaddr '192.168.31.1'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option netmask '255.255.255.0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'ifb'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'ifb0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'ready'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'static'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ipaddr '169.254.29.1'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option netmask '255.255.255.0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'wan'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'dhcp'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: list dns '1.1.1.1'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: list dns '8.8.4.4'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option mtu '1500'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option peerdns '0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'eth1'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: config interface 'openvpn'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option ifname 'tun0'
- Mon Nov 25 09:53:38 CST 2019 netconfig[903]: option proto 'openvpn'
- [ 20.890000] ipaccount: ifname [br-lan] event[16]
- [ 20.900000] ipaccount: ifname [br-lan] event[5]
- [ 20.900000] ipaccount: ifname [eth0] event[13]
- [ 20.910000] FFFFFF8C:53:FFFFFFC3:FFFFFF96:11:1C
- [ 20.910000] Raeth v3.1 (Tasklet,SkbRecycle)
- [ 20.920000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- [ 20.930000] phy_free_head is 0xc2c000!!!
- [ 20.930000] phy_free_tail_phy is 0xc2dff0!!!
- [ 20.940000] txd_pool=a0c30000 phy_txd_pool=00C30000
- [ 20.940000] ei_local->skb_free start address is 0x87e726dc.
- [ 20.950000] free_txd: 00c30010, ei_local->cpu_ptr: 00C30000
- [ 20.950000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 20.960000] ----------------+---------+--------
- [ 20.960000] 0xa0c30000 0x00C30000 0x00C30000
- [ 20.970000]
- [ 20.970000] phy_qrx_ring = 0x00c2e000, qrx_ring = 0xa0c2e000
- [ 20.980000]
- [ 20.980000] phy_rx_ring0 = 0x00c38000, rx_ring0 = 0xa0c38000
- [ 21.010000] MT7530 Reset Completed!!
- [ 21.010000] change HW-TRAP to 0x117c8f
- [ 21.020000] set LAN/WAN WLLLL
- [ 21.030000] GMAC1_MAC_ADRH -- : 0x00008c53
- [ 21.030000] GMAC1_MAC_ADRL -- : 0xc396111c
- [ 21.040000] eth1: ===> VirtualIF_open
- [ 21.040000] MT7621 GE2 link rate to 1G
- [ 21.040000] CDMA_CSG_CFG = 81000000
- [ 21.040000] GDMA1_FWD_CFG = 20710000
- [ 21.040000] GDMA2_FWD_CFG = 20710000
- [ 21.040000] ipaccount: ifname [eth0] event[1]
- [ 21.040000] ipaccount: ifname [eth0] event[20]
- [ 21.040000] device eth0 entered promiscuous mode
- [ 21.040000] ipaccount: ifname [br-lan] event[11]
- [ 21.040000] ipaccount: ifname [br-lan] event[8]
- [ 21.040000] ipaccount: ifname [br-lan] event[8]
- [ 21.040000] ipaccount: ifname [br-lan] event[13]
- [ 21.040000] br-lan: port 1(eth0) entered forwarding state
- [ 21.040000] br-lan: port 1(eth0) entered forwarding state
- [ 21.040000] ipaccount: ifname [br-lan] event[1]
- [ 21.110000] ipaccount: ifname [ifb0] event[13]
- [ 21.110000] ipaccount: ifname [ifb0] event[1]
- [ 21.120000] ipaccount: ifname [lo] event[13]
- [ 21.120000] ipaccount: ifname [lo] event[1]
- [ 21.130000] ipaccount: ifname [eth1] event[13]
- [ 21.130000] eth1: ===> VirtualIF_open
- [ 21.140000] ipaccount: ifname [eth1] event[1]
- [ 21.900000] ipaccount: ifname [br-lan] event[4]
- [ 21.920000] ipaccount: ifname [wl1] event[13]
- [ 21.920000] pAd->ApBootFlag = TRUE
- [ 22.120000] efuse_probe: efuse = 10000002
- [ 22.290000] tssi_1_target_pwr_g_band = 12
- [ 23.040000] br-lan: port 1(eth0) entered forwarding state
- [ 24.310000] ESW: Link Status Changed - Port0 Link UP,1000Mbps,Full Duplex
- [ 25.060000] <==== rt28xx_init, Status=0
- [ 25.060000] ipaccount: ifname [wl2] event[16]
- [ 25.070000] ipaccount: ifname [wl2] event[5]
- [ 25.070000] ipaccount: ifname [wl3] event[16]
- [ 25.080000] ipaccount: ifname [wl3] event[5]
- [ 25.080000] ipaccount: ifname [apcli0] event[16]
- [ 25.090000] ipaccount: ifname [apcli0] event[5]
- [ 25.090000] pAd->ApBootFlag = FALSE
- [ 25.100000] ipaccount: ifname [wl1] event[1]
- [ 26.390000] ipaccount: ifname [wl1] event[20]
- [ 26.390000] device wl1 entered promiscuous mode
- [ 26.400000] br-lan: port 2(wl1) entered forwarding state
- [ 26.400000] br-lan: port 2(wl1) entered forwarding state
- [ 26.440000] ipaccount: ifname [wl2] event[13]
- [ 26.440000] ##### mbss_cr_enable, BssId = 1
- [ 26.450000] ipaccount: ifname [wl2] event[1]
- [ 27.310000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 27.600000] ipaccount: ifname [wl0] event[13]
- [ 27.610000] wl0: ===> main_virtual_if_open
- [ 27.930000] E2pAccessMode=2
- [ 27.930000] SSID[0]=dolf2, EdcaIdx=0
- [ 27.940000] DBDC Mode=0, eDBDC_mode = 0
- [ 27.940000] BSS0 PhyMode=49
- [ 27.940000] wmode_band_equal(): Band Equal!
- [ 27.950000] [TxPower] BAND0: 100
- [ 27.960000] [PERCENTAGEenable] BAND0: 1
- [ 27.960000] FragThreshold[0]=2346
- [ 27.970000] [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0
- [ 28.020000] HT: WDEV[0] Ext Channel = ABOVE
- [ 28.020000] HT: greenap_cap = 0
- [ 28.050000] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:124 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:125
- [ 28.060000] Top Init Done!
- [ 28.070000] Use dev_alloc_skb
- [ 28.070000] RX[0] DESC a0c28000 size = 16384
- [ 28.080000] RX[1] DESC a0c26000 size = 8192
- [ 28.080000] cut_through_init(): ct sw token number = 4095
- [ 28.090000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- [ 28.090000] cut_through_token_list_init(): 850c2c08,850c2c08
- [ 28.100000] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
- [ 28.110000] cut_through_token_list_init(): 850c2c18,850c2c18
- [ 28.110000] Hif Init Done!
- [ 28.120000] ctl->txq = c187b76c
- [ 28.120000] ctl->rxq = c187b778
- [ 28.120000] ctl->ackq = c187b784
- [ 28.130000] ctl->kickq = c187b790
- [ 28.130000] ctl->tx_doneq = c187b79c
- [ 28.130000] ctl->rx_doneq = c187b7a8
- [ 28.140000] Parsing patch header
- [ 28.140000] Built date: 20180518100604a
- [ 28.140000]
- [ 28.150000] Platform: ALPS
- [ 28.150000] HW/SW version: 0x8a108a10
- [ 28.150000] Patch version: 0x00000010
- [ 28.160000] Target address: 0x80000, length: 11072
- [ 28.160000] patch is not ready && get semaphore success
- [ 28.170000] EventGenericEventHandler: CMD Success
- [ 28.170000] MtCmdPatchFinishReq
- [ 28.190000] EventGenericEventHandler: CMD Success
- [ 28.190000] release patch semaphore
- [ 28.190000] Parsing CPU 0 fw tailer
- [ 28.200000] Chip ID: 0x04
- [ 28.200000] Eco version: 0x00
- [ 28.200000] Region number: 0x00
- [ 28.210000] Format version: 0x00
- [ 28.210000] Ram version: _reserved_
- [ 28.210000] Built date: 20190307015603\00
- [ 28.220000] Common crc: 0x0
- [ 28.220000] Parsing tailer region 0
- [ 28.220000] Feature set: 0x01
- [ 28.230000] Target address: 0x84000, Download size: 409600
- [ 28.230000] Parsing tailer region 1
- [ 28.240000] Feature set: 0x01
- [ 28.240000] Target address: 0x209c400, Download size: 43328
- [ 28.240000] EventGenericEventHandler: CMD Success
- [ 28.260000] EventGenericEventHandler: CMD Success
- [ 28.260000] MtCmdFwStartReq: override = 0x1, address = 0x84000
- [ 28.270000] EventGenericEventHandler: CMD Success
- [ 28.270000] Parsing CPU 1 fw tailer
- [ 28.270000] Chip ID: 0x04
- [ 28.280000] Eco version: 0x00
- [ 28.280000] Region number: 0x00
- [ 28.280000] Format version: 0x00
- [ 28.290000] Ram version: _reserved_
- [ 28.290000] Built date: 20190415154149\00
- [ 28.290000] Common crc: 0x0
- [ 28.300000] Parsing tailer region 0
- [ 28.300000] Feature set: 0x01
- [ 28.300000] Target address: 0x90000000, Download size: 122608
- [ 28.310000] EventGenericEventHandler: CMD Success
- [ 28.320000] MtCmdFwStartReq: override = 0x4, address = 0x0
- [ 28.360000] EventGenericEventHandler: CMD Success
- [ 28.400000] br-lan: port 2(wl1) entered forwarding state
- [ 28.430000] MCU Init Done!
- [ 28.430000] efuse_probe: efuse = 10000212
- [ 28.430000] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- [ 28.440000] RtmpEepromGetDefault::e2p_dafault=1
- [ 28.440000] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
- [ 28.450000] NVM is FLASH mode. dev_idx [1] FLASH OFFSET [0x8000]
- [ 28.460000] [34mNICReadEEPROMParameters: EEPROM 0x52 b300[m
- [ 35.940000] Country Region from e2p = 101
- [ 35.940000] MtCmdSetDbdcCtrl:(ret = 0)
- [ 35.950000] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
- [ 35.950000] MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!!
- [ 35.960000] EEPROM Init Done!
- [ 35.960000] mt_mac_init()-->
- [ 35.970000] mt7615_init_mac_cr()-->
- [ 35.970000] mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c
- [ 35.980000] mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c
- [ 35.980000] <--mt_mac_init()
- [ 35.980000] MAC Init Done!
- [ 35.990000] MT7615BBPInit():BBP Initialization.....
- [ 35.990000] Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- [ 36.000000] Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- [ 36.010000] PHY Init Done!
- [ 36.010000] MtCmdSetMacTxRx:(ret = 0)
- [ 36.020000] WifiFwdSet::disabled=0
- [ 36.020000] Main bssid = 00:00:00:00:00:00
- [ 36.030000] MtCmdSetMacTxRx:(ret = 0)
- [ 36.030000] MtCmdSetMacTxRx:(ret = 0)
- [ 36.030000] <==== mt_wifi_init, Status=0
- [ 36.040000] TxBfModuleEnCtrl:It's not DBDC mode
- [ 36.040000] MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
- [ 36.050000] MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
- [ 36.050000] ipaccount: ifname [apclii0] event[16]
- [ 36.060000] ipaccount: ifname [apclii0] event[5]
- [ 36.060000] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:124 (WdsNum:0, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:125
- [ 36.110000] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
- [ 36.120000] wifi_sys_open(), wdev idx = 0
- [ 36.120000] wdev_attr_update(): wdevId0 = 8c:53:c3:96:11:1e
- [ 36.130000] [RcGetHdevByPhyMode]-- channel 0 fix for rdev fetching
- [ 36.130000] MtCmdSetDbdcCtrl:(ret = 0)
- [ 36.140000] [1;33m [RadarStateCheck] RD_NORMAL_MODE [m
- [ 36.140000] AP inf up for ra_0(func_idx) OmacIdx=0
- [ 36.150000] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
- [ 36.150000] ApAutoChannelAtBootUp----------------->
- [ 36.160000] ApAutoChannelAtBootUp: AutoChannelBootup = 1
- [ 36.160000] MtCmdSetMacTxRx:(ret = 0)
- [ 36.170000] [AutoChSelBuildChannelListFor5G] ChListNum5G = 13
- [ 36.980000] ApAutoChannelAtBootUp : Auto channel selection: Selected channel = 157, IsAband = 1
- [ 36.980000] [41m AutoChSelUpdateChannel(): Update channel for wdev for this band PhyMode = 49, Channel = 157 [m
- [ 36.990000] [1;33m [RadarStateCheck] RD_NORMAL_MODE [m
- [ 38.110000] :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
- [ 38.110000] [DfsCacNormalStart] Normal start. Enable MAC TX
- [ 38.110000] ApAutoChannelAtBootUp<-----------------
- [ 38.110000] wifi_sys_linkup(), wdev idx = 0
- [ 38.240000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- [ 38.250000] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- [ 38.260000] APStartUpForMbss: BssIndex = 0 channel = 157
- [ 38.260000] MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
- [ 38.270000] apidx 0 for WscUUIDInit
- [ 38.270000] Generate UUID for apidx(0)
- [ 38.280000] ipaccount: ifname [wl0] event[1]
- [ 38.320000] wifi_sys_linkdown(), wdev idx = 0
- [ 38.320000] ExtEventBeaconLostHandler::FW LOG, Beacon lost (8c:53:c3:96:11:1e), Reason 0x10
- [ 38.320000] Beacon lost - AP disabled!!!
- [ 38.340000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
- [ 38.350000] wifi_sys_close(), wdev idx = 0
- [ 38.350000] wifi_sys_open(), wdev idx = 0
- [ 38.360000] wdev_attr_update(): wdevId0 = 8c:53:c3:96:11:1e
- [ 38.360000] MtCmdSetDbdcCtrl:(ret = 0)
- [ 38.370000] [DfsCacNormalStart] Normal start. Enable MAC TX
- [ 38.370000] wifi_sys_linkup(), wdev idx = 0
- [ 38.520000] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 8192, CmdBssInfoBmcRate.u2McTransmit = 8196
- [ 38.540000] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
- [ 39.260000] ipaccount: ifname [wl0] event[20]
- [ 39.260000] device wl0 entered promiscuous mode
- [ 39.270000] br-lan: port 3(wl0) entered forwarding state
- [ 39.270000] br-lan: port 3(wl0) entered forwarding state
- [ 39.290000] Device Instance
- [ 39.300000] WDEV 00:, Name:wl0, Wdev(list) Idx:0
- [ 39.300000] Idx:6
- [ 39.300000] WDEV 01:, Name:apclii0, Wdev(list) Idx:1
- [ 39.310000] Idx:11
- [ 39.310000]
- [ 39.310000]
- [ 39.310000]
- [ 39.320000]
- [ 39.320000]
- [ 39.320000]
- [ 39.320000]
- [ 39.320000]
- [ 39.320000]
- [ 39.330000]
- [ 39.330000]
- [ 39.330000]
- [ 39.330000]
- [ 39.330000]
- [ 39.330000]
- [ 39.330000]
- [ 39.830000] enable ip account module.
- rcS S calling: /etc/rc.d/S20network boot: WARNING: EXITCODE=0, execute too slow, 20 >= 15: /etc/rc.d/S20network boot
- [ 41.270000] br-lan: port 3(wl0) entered forwarding state
- [ 41.490000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 44.030000] Ralink HW NAT Module Enabled
- [ 44.040000] eth0 ifindex =3
- [ 44.040000] eth1 ifindex =4
- [ 44.040000] HNAT: switch HNAT ON.....
- [ 44.050000] *hwnat reg dev ******* set dev[lo]->ifindex = 1
- [ 44.050000] *hwnat reg dev ******* set dev[ifb0]->ifindex = 2
- [ 44.060000] *hwnat reg dev ******* set dev[wl1]->ifindex = 5
- [ 44.060000] *hwnat reg dev ******* set dev[wl0]->ifindex = 6
- [ 44.070000] *hwnat reg dev ******* set dev[br-lan]->ifindex = 7
- [ 44.080000] *hwnat reg dev ******* set dev[wl2]->ifindex = 8
- [ 44.080000] *hwnat reg dev ******* set dev[wl3]->ifindex = 9
- [ 44.090000] *hwnat reg dev ******* set dev[apcli0]->ifindex = 10
- [ 44.090000] *hwnat reg dev ******* set dev[apclii0]->ifindex = 11
- [ 44.140000] Device Instance
- [ 44.140000] WDEV 00:, Name:wl0, Wdev(list) Idx:0
- [ 44.150000] Idx:6
- [ 44.150000] WDEV 01:, Name:apclii0, Wdev(list) Idx:1
- [ 44.150000] Idx:11
- [ 44.160000]
- [ 44.160000]
- [ 44.160000]
- [ 44.160000]
- [ 44.160000]
- [ 44.160000]
- [ 44.170000]
- [ 44.170000]
- [ 44.170000]
- [ 44.170000]
- [ 44.170000]
- [ 44.170000]
- [ 44.170000]
- [ 44.180000]
- [ 44.180000]
- [ 44.180000]
- [ 44.190000] Device Instance
- [ 44.190000] WDEV 00:, Name:wl0, Wdev(list) Idx:0
- [ 44.190000] Idx:6
- [ 44.190000] WDEV 01:, Name:apclii0, Wdev(list) Idx:1
- [ 44.200000] Idx:11
- [ 44.200000]
- [ 44.200000]
- [ 44.210000]
- [ 44.210000]
- [ 44.210000]
- [ 44.210000]
- [ 44.210000]
- [ 44.210000]
- [ 44.210000]
- [ 44.220000]
- [ 44.220000]
- [ 44.220000]
- [ 44.220000]
- [ 44.220000]
- [ 44.220000]
- [ 44.220000]
- [ 44.240000] HNAT: switch HNAT ON.....
- Mon Nov 25 09:54:10 CST 2019 boot_check[3767]: INFO: Wireless OK
- [ 45.320000] ipaccount: refresh dev ifname to [eth0 wl0 wl1 wl3]
- [ 45.320000] ipaccount: landev_init_all() add dev [eth0] is_wireless: 0.
- [ 45.330000] ipaccount: landev_init_all() add dev [wl0] is_wireless: 1.
- [ 45.340000] ipaccount: landev_init_all() add dev [wl1] is_wireless: 1.
- [ 45.340000] ipaccount: landev_init_all() add dev [wl3] is_wireless: 1.
- [ 47.680000] dev_redirect: add(+) dev redirect mapping: src:eth1->dst:ifb0
- [ 49.610000] dev_redirect OFF.
- [ 49.650000] dev_redirect OFF.dev_redirect OFF.ipaccount: landev_init_all() add dev [eth0] is_wireless: 0.
- [ 51.870000] ipaccount: landev_init_all() add dev [wl0] is_wireless: 1.
- [ 51.880000] ipaccount: landev_init_all() add dev [wl1] is_wireless: 1.
- [ 51.880000] ipaccount: landev_init_all() add dev [wl3] is_wireless: 1.
- rcS S boot: INFO: rcS S boot timing 43 seconds.
- Sun Jan 26 14:36:59 CST 2020 INFO: rcS S boot timing 43 seconds.
- rcS S boot: system type(RM2100/2): SQUASH/3
- Sun Jan 26 14:36:59 CST 2020 system type(RM2100/2): SQUASH/3
- rcS S boot: ROOTFS: /dev/mtdblock14 on / type squashfs (ro,relatime)
- Sun Jan 26 14:36:59 CST 2020 ROOTFS: /dev/mtdblock14 on / type squashfs (ro,relatime)
- [ 52.370000] led=6, on=1, off=4000, blinks,=1, reset=1, time=1
- [ 52.380000] led=8, on=1, off=4000, blinks,=1, reset=1, time=1
- [ 52.390000] led=8, on=4000, off=1, blinks,=1, reset=1, time=1
- Unlocking cfg_bak ...
- Erasing cfg_bak ...
- Unlocking cfg_bak ...
- Writing from /tmp/cfg_bak.tgz to cfg_bak ... [ ][e][w]
- Sun Jan 26 14:37:00 CST 2020 boot_check[6080]: Booting up finished.
- [ 59.920000] led=10, on=1, off=4000, blinks,=1, reset=1, time=1
- [ 59.930000] led=12, on=1, off=4000, blinks,=1, reset=1, time=1
- [ 59.940000] led=12, on=4000, off=1, blinks,=1, reset=1, time=1
- [ 405.630000] wifi_log: [RECV-AUTH] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="recv-auth", rssi="-50", status="0"
- [ 405.640000] New Sta:b4:86:55:f4:bd:26
- [ 405.650000] wifi_log: [MLME-AUTH] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="mlme-auth", status="0"
- [ 405.660000] wifi_log: [RECV-ASSOC] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="recv-assoc", rssi="-51"
- [ 405.670000] entry wcid 1 QosMapSupport=0
- [ 405.680000] wifi_log: [MLME-ASSOC] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="mlme-assoc", status="0"
- [ 405.780000] wifi_log: [SEND-EAPOL-1/4] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="send-eapol"
- [ 405.790000] wifi_log: [RECV-EAPOL-2/4] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="recv-eapol"
- [ 405.800000] wifi_log: [SEND-EAPOL-3/4] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="send-eapol"
- [ 405.810000] wifi_log: [RECV-EAPOL-4/4] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="recv-eapol"
- [ 405.820000] AP SETKEYS DONE - AKMMap=WPA2PSK, PairwiseCipher=AES, GroupCipher=TKIP, wcid=1 from B4:86:55:F4:BD:26
- [ 405.820000]
- [ 405.840000] wifi_log: [EAPOL-DONE] - if="wl0", sta_mac="b4:86:55:f4:bd:26", bssid="8c:53:c3:96:11:1e", action="eapol-done"
- [ 405.850000] PTK:c4b6180dac2c5a7ca86e53d800bbc296e22c6cea22c2372987dd8f9f67e84947bebb6e54ebc25da1c8852c06d96ac3d527ee04849ea7a279c77ca58fa75073bc
- [ 407.540000] Rcv Wcid(1) AddBAReq
- [ 407.540000] Start Seq = 00000016
- [ 530.150000] 642, flush one!
- [ 559.510000] :MtCmdCr4Set: arg0(13) arg1(255) arg2(4)
- [ 559.510000] :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(1)
- [ 560.510000] :MtCmdPktBudgetCtrl: bssid(255),wcid(65535),type(0)
- [ 932.290000] ca2, flush one!
- [ 1010.990000] eba, flush one!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement