Guest User

BPi-M3, trying to boot Orange Pi rootfs

a guest
Nov 30th, 2015
623
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. HELLO! BOOT0 is starting!
  2. boot0 version : 4.0.0
  3. rtc[1] value = 0x00010000
  4. rtc[2] value = 0x00020000
  5. rtc[3] value = 0x00030000
  6. DRAM DRIVE INFO: V1.0
  7. DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
  8. DRAM normal_mode value: 00000001
  9. DRAM CLK =672 MHZ
  10. PMU: AXP81X
  11. ddr voltage = 1200 mv
  12. using ic A83T
  13. using axp AXP813
  14. DRAM zq value: 00003bfb
  15. dram size =2048
  16. card boot number = 0
  17. card no is 0
  18. sdcard 0 line count 0
  19. [mmc]: mmc driver ver 2014-8-11 15:06:39
  20. [mmc]: ***Try SD card 0***
  21. [mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  22. [mmc]: vendor: Man 00035344 Snr 10133156
  23. [mmc]: product: SU08G
  24. [mmc]: revision: 8.0
  25. [mmc]: ***SD/MMC 0 init OK!!!***
  26. sdcard 0 init ok
  27. ERROR! NOT find the head of uboot.
  28. The size of uboot is 000d4000.
  29. sum=a6c75121
  30. src_sum=a6c75121
  31. Succeed in loading uboot from sdmmc flash.
  32. Ready to disable icache.
  33. Jump to secend Boot.
  34. [ 0.312]
  35.  
  36. U-Boot 2011.09-rc1-00000-g00d9887-dirty (Nov 30 2015 - 15:09:15) Allwinner Technology
  37.  
  38. [ 0.322]version: 2.1.0
  39. normal mode
  40. [ 0.400]pmbus: normal or secure os
  41. ready
  42. [ 0.405]PMU: AXP81X
  43. [ 0.407]PMU: AXP81X found
  44. bat_vol=287, ratio=100
  45. [ 0.412]PMU: dcdc2 900
  46. [ 0.415]PMU: pll1 1008 Mhz
  47. AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
  48. set power on vol to default
  49. dcdc1_vol = 3300, onoff=1
  50. dcdc2_vol = 900, onoff=1
  51. dcdc3_vol = 900, onoff=1
  52. dcdc4_vol = 900, onoff=1
  53. dcdc6_vol = 900, onoff=1
  54. aldo1_vol = 1800, onoff=0
  55. aldo2_vol = 1800, onoff=1
  56. aldo3_vol = 3000, onoff=1
  57. eldo2_vol = 1800, onoff=0
  58. dldo1_vol = 3300, onoff=0
  59. dldo2_vol = 3300, onoff=0
  60. dldo3_vol = 2500, onoff=1
  61. dldo4_vol = 2800, onoff=0
  62. fldo2_vol = 900, onoff=1
  63. find power_sply to end
  64. supply=dcdc1
  65. axp=axp81x, supply=dcdc1, vol=3300
  66. reg addr=0x1c20b04, value=0xd, pmu_vol=3300
  67. supply=dcdc1
  68. axp=axp81x, supply=dcdc1, vol=3300
  69. reg addr=0x1c20b08, value=0xd, pmu_vol=3300
  70. supply=dldo3
  71. axp=axp81x, supply=dldo3, vol=1800
  72. reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
  73. supply=dcdc1
  74. axp=axp81x, supply=dcdc1, vol=3300
  75. reg addr=0x1c20b10, value=0xd, pmu_vol=3300
  76. supply=dcdc1
  77. axp=axp81x, supply=dcdc1, vol=3300
  78. reg addr=0x1c20b14, value=0xd, pmu_vol=3300
  79. supply=dcdc1
  80. axp=axp81x, supply=dcdc1, vol=3300
  81. reg addr=0x1c20b18, value=0xd, pmu_vol=3300
  82. supply=dcdc1
  83. axp=axp81x, supply=dcdc1, vol=3300
  84. reg addr=0x1c20b1c, value=0xd, pmu_vol=3300
  85. supply=aldo3
  86. axp=axp81x, supply=aldo3, vol=3000
  87. reg addr=0x1f02f00, value=0xa, pmu_vol=3000
  88. config gpio bias voltage finish
  89. vbus exist
  90. no battery, limit to dc
  91. ac100 reg 0x00 = 0x101
  92. ac100 reg 0xd0 = 0x0
  93. ac100 reg 0xd1 = 0x0
  94. fel key old mode
  95. run key detect
  96. no key found
  97. no key input
  98. dram_para_set start
  99. dram_para_set end
  100. [ 1.639]DRAM: 2 GiB
  101. relocation Offset is: 75af9000
  102. gic: normal or no secure os mode
  103. script config pll_de to 504 Mhz
  104. script config pll_video1 to 297 Mhz
  105. Not Found clk pll_video in script
  106. enable power vcc-hdmi-18, ret=0
  107. DRV_DISP_Init end
  108. [ 1.801]boot_disp.output_disp=1
  109. [ 1.804]boot_disp.output_type=3
  110. [ 1.808]boot_disp.output_mode=10
  111. [ 1.811]fetch script data boot_disp.auto_hpd fail
  112. disp1 device type(4) enable
  113. attched ok, mgr1<-->device1, type=4, mode=10----
  114. ready to set mode
  115. workmode = 0
  116. MMC: 0
  117. [ 1.826][mmc]: mmc driver ver 2015-04-13 14:50:00
  118. [ 1.831][mmc]: get sdc_phy_wipe fail.
  119. [ 1.835][mmc]: get sdc0 sdc_erase fail.
  120. [ 1.839][mmc]: get sdc_f_max fail,use default 50000000Hz
  121. [ 1.845][mmc]: get sdc_ex_dly_used fail,use default dly
  122. [ 1.850][mmc]: SUNXI SD/MMC: 0
  123. [ 1.863][mmc]: *Try SD card 0*
  124. [ 1.910][mmc]: CID 0x3534453 0x55303847 0x80101331 0x5600d69b
  125. [ 1.915][mmc]: mmc clk 50000000
  126. [ 1.919][mmc]: SD/MMC Card: 4bit, capacity: 7580MB
  127. [ 1.923][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
  128. [ 1.929][mmc]: ***SD/MMC 0 init OK!!!***
  129. [ 1.933][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
  130. [ 1.939][mmc]: secure_feature 0x0
  131. [ 1.942][mmc]: secure_removal_type 0x0
  132. [ 1.946]sunxi flash init ok
  133. [ 1.951][mmc]: MMC Device 2 not found
  134. [ 1.955][mmc]: Can not find mmc dev
  135. [ 1.958][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
  136. sunxi_secstorage_read fail
  137. get secure storage map err
  138. sunxi secure storage is not supported
  139. private partition is not exist
  140. In: serial
  141. Out: serial
  142. Err: serial
  143. --------fastboot partitions--------
  144. -total partitions:6-
  145. -name- -start- -size-
  146. boot-res : 1000000 2000000
  147. env : 3000000 1000000
  148. boot : 4000000 1000000
  149. rootfs : 5000000 20000000
  150. klog : 25000000 1000000
  151. UDISK : 26000000 0
  152. -----------------------------------
  153. base bootcmd=run setargs_nand boot_normal
  154. bootcmd set setargs_mmc
  155. key 0
  156. recovery key high 10, low 8
  157. cant find fstbt value
  158. no misc partition is found
  159. to be run cmd=run setargs_mmc boot_normal
  160. serial is: 00000000000000000000
  161. mount part name boot-res
  162. cant open script.bin, maybe it is not exist
  163. WORK_MODE_BOOT
  164. board_status_probe
  165. [ 2.062]power trigger
  166. bat_exist=0
  167. [ 2.065]no battery exist
  168. sunxi_bmp_logo_display
  169. [ 2.365]fetch script data boot_disp.output_disp fail
  170. [ 2.370]screen_id =1, screen_width =1920, screen_height =1080
  171. [ 2.376]frame buffer address 46400000
  172. [ 2.380]Hit any key to stop autoboot: 0
  173. read boot or recovery all
  174. [ 6.322]sunxi flash read :offset 4000000, 16439339 bytes OK
  175. [ 6.333]ready to boot
  176. [ 6.335][mmc]: MMC Device 2 not found
  177. [ 6.339][mmc]: mmc not find,so not exit
  178. [ 6.343]
  179. Starting kernel ...
  180.  
  181. [sun8i_fixup]: From boot, get meminfo:
  182. Start: 0x40000000
  183. Size: 2048MB
  184. ion_carveout reserve: 96m 128m
  185. ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
  186. ion_cma reserve: 120m 176m 512m
  187. ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
  188. ------sun8i_smp_init_ops----37-----
  189. [ 0.000000] Booting Linux on physical CPU 0
  190. [ 0.000000] Initializing cgroup subsys cpuset
  191. [ 0.000000] Initializing cgroup subsys cpu
  192. [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@opennms) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #2 SMP PREEMPT Mon Nov 30 15:10:54 CET 2015
  193. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  194. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  195. [ 0.000000] Machine: sun8i
  196. [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
  197. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  198. [ 0.000000] On node 0 totalpages: 524288
  199. [ 0.000000] free_area_init_node: node 0, pgdat c0ba3400, node_mem_map c0c4b000
  200. [ 0.000000] Normal zone: 1404 pages used for memmap
  201. [ 0.000000] Normal zone: 0 pages reserved
  202. [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
  203. [ 0.000000] HighMem zone: 3204 pages used for memmap
  204. [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
  205. [ 0.000000] script_init enter!
  206. [ 0.000000] script_init exit!
  207. [ 0.000000] [mcpm_smp_init_cpus] ncores=8
  208. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1e6f000 s11776 r8192 d12800 u32768
  209. [ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=8*4096
  210. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  211. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
  212. [ 0.000000] Kernel command line: boot_type=1 disp_para=40a0000 fb_base=0x0 config_size=55080 androidboot.serialno=00000000000000000000 androidboot.hardware=sun8i enforcing=1 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list=120m,171
  213. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  214. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  215. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  216. [ 0.000000] allocated 4194304 bytes of page_cgroup
  217. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  218. [ 0.000000] Memory: 2048MB = 2048MB total
  219. [ 0.000000] Memory: 1536492k/1536492k available, 560660k reserved, 933888K highmem
  220. [ 0.000000] Virtual kernel memory layout:
  221. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  222. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  223. [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  224. [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  225. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  226. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  227. [ 0.000000] .text : 0xc0008000 - 0xc0a10630 (10274 kB)
  228. [ 0.000000] .init : 0xc0a11000 - 0xc0a65e00 ( 340 kB)
  229. [ 0.000000] .data : 0xc0a66000 - 0xc0bb5468 (1342 kB)
  230. [ 0.000000] .bss : 0xc0bb548c - 0xc0c4a9f8 ( 598 kB)
  231. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  232. [ 0.000000] Preemptible hierarchical RCU implementation.
  233. [ 0.000000] NR_IRQS:544
  234. [ 0.000000] Architected local timer running at 24.00MHz.
  235. [ 0.000000] Switching to timer-based delay loop
  236. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  237. [ 0.000000] Console: colour dummy device 80x30
  238. [ 0.000000] console [tty1] enabled
  239. [ 0.001485] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
  240. [ 0.001559] pid_max: default: 32768 minimum: 301
  241. [ 0.001897] Mount-cache hash table entries: 512
  242. [ 0.003238] Initializing cgroup subsys cpuacct
  243. [ 0.003282] Initializing cgroup subsys memory
  244. [ 0.003357] Initializing cgroup subsys devices
  245. [ 0.003391] Initializing cgroup subsys freezer
  246. [ 0.003422] Initializing cgroup subsys blkio
  247. [ 0.003474] Initializing cgroup subsys perf_event
  248. [ 0.003572] CPU: Testing write buffer coherency: ok
  249. [ 0.003663] ftrace: allocating 25296 entries in 75 pages
  250. [ 0.040303] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  251. [ 0.040389] Setting up static identity map for 0x406d93a0 - 0x406d93f8
  252. [ 0.010000] CPU1: Booted secondary processor
  253. [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  254. [ 0.010000] CPU2: Booted secondary processor
  255. [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  256. [ 0.010000] CPU3: Booted secondary processor
  257. [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  258. [ 0.260092] CPU4: failed to boot: -22
  259. [ 0.300068] CPU5: failed to boot: -22
  260. [ 0.340071] CPU6: failed to boot: -22
  261. [ 0.380092] CPU7: failed to boot: -22
  262. [ 0.380307] Brought up 4 CPUs
  263. [ 0.380332] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
  264. [ 0.380909] devtmpfs: initialized
  265. [ 0.390202] pinctrl core: initialized pinctrl subsystem
  266. [ 0.411362] NET: Registered protocol family 16
  267. [ 0.433813] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  268. [ 0.433928] script_sysfs_init success
  269. [ 0.433979] sunxi_dump_init success
  270. [ 0.435130] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
  271. [ 0.436956] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
  272. [ 0.437435] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
  273. [ 0.438841] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  274. [ 0.438884] hw-breakpoint: maximum watchpoint size is 8 bytes.
  275. [ 0.439672] [sunxi-module]: [sunxi-module.0] probe success
  276. [ 0.440406] script config pll_video1 to 297 Mhz
  277. [ 0.440444] script config pll_ve to 432 Mhz
  278. [ 0.440469] Not Found clk pll_periph in script
  279. [ 0.440498] script config pll_gpu to 432 Mhz
  280. [ 0.440526] script config pll_hsic to 480 Mhz
  281. [ 0.440555] script config pll_de to 504 Mhz
  282. [ 0.440577] sunxi_default_clk_init
  283. [ 0.440597] try to set pll6ahb1 to 200000000
  284. [ 0.440660] try to set ahb clk source to pll6ahb1
  285. [ 0.440686] set ahb clk source to pll6ahb1
  286. [ 0.440710] try to set ahb1 to 200000000
  287. [ 0.440736] try to set apb1 to 100000000
  288. [ 0.441843] ===fe3o4==== sunxi_root_procfs_attach ret:0
  289. [ 0.451090] bio: create slab <bio-0> at 0
  290. [ 0.451090] [ARISC] :sunxi-arisc driver v1.70
  291. [ 0.463217] [ARISC] :arisc version: [v0.1.25.3]
  292. [ 0.463274] [sunxi-module]: arisc register success
  293. [ 0.463708] sunxi_get_soc_bin: slow chip
  294. [ 0.464157] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
  295. [ 0.010000] CPU4: Booted secondary processor
  296. [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
  297. [ 0.010000] CPU5: Booted secondary processor
  298. [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
  299. [ 0.010000] CPU6: Booted secondary processor
  300. [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
  301. [ 0.010000] CPU7: Booted secondary processor
  302. [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
  303. [ 0.491420] SCSI subsystem initialized
  304. [ 0.491420] libata version 3.00 loaded.
  305. [ 0.491420] usbcore: registered new interface driver usbfs
  306. [ 0.491420] usbcore: registered new interface driver hub
  307. [ 0.491420] usbcore: registered new device driver usb
  308. [ 0.491420] twi_chan_cfg()335 - [twi0] has no twi_regulator.
  309. [ 0.491420] twi_chan_cfg()335 - [twi1] has no twi_regulator.
  310. [ 0.491420] twi_chan_cfg()335 - [twi2] has no twi_regulator.
  311. [ 0.491712] Linux video capture interface: v2.00
  312. [ 0.510404] Advanced Linux Sound Architecture Driver Version 1.0.25.
  313. [ 0.511063] Bluetooth: Core ver 2.16
  314. [ 0.511132] NET: Registered protocol family 31
  315. [ 0.511157] Bluetooth: HCI device and connection manager initialized
  316. [ 0.511190] Bluetooth: HCI socket layer initialized
  317. [ 0.511216] Bluetooth: L2CAP socket layer initialized
  318. [ 0.511263] Bluetooth: SCO socket layer initialized
  319. [ 0.511556] cfg80211: Calling CRDA to update world regulatory domain
  320. [ 0.511651] Switching to clocksource arch_sys_counter
  321. [ 0.537819] FS-Cache: Loaded
  322. [ 0.538189] CacheFiles: Loaded
  323. [ 0.549883] axp81x_dcdc1: Failed to create debugfs directory
  324. [ 0.551150] NET: Registered protocol family 2
  325. [ 0.551555] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  326. [ 0.552339] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  327. [ 0.554839] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  328. [ 0.556424] TCP: Hash tables configured (established 131072 bind 65536)
  329. [ 0.556456] TCP: reno registered
  330. [ 0.556484] UDP hash table entries: 512 (order: 2, 16384 bytes)
  331. [ 0.556551] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  332. [ 0.556994] NET: Registered protocol family 1
  333. [ 0.557443] RPC: Registered named UNIX socket transport module.
  334. [ 0.557476] RPC: Registered udp transport module.
  335. [ 0.557500] RPC: Registered tcp transport module.
  336. [ 0.557524] RPC: Registered tcp NFSv4.1 backchannel transport module.
  337. [ 0.558376] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
  338. [ 0.558580] [pm]aw_pm_init!
  339. [ 0.558608] standby_mode = 1.
  340. [ 0.558628] wakeup src cnt is : 2.
  341. [ 0.558655] pmu name: pmu1_para .
  342. [ 0.558681] pmu1_enable = 0x1.
  343. [ 0.558702] pmux_id = 0x7.
  344. [ 0.558724] pmu name: pmu2_para .
  345. [ 0.558747] config_pmux_para: script_parser_fetch err.
  346. [ 0.558772] pmu2_enable = 0x0.
  347. [ 0.559190] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  348. [ 0.559375] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  349. [ 0.559415] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
  350. [ 0.559511] after inited: sys_mask config = 0xebd5.
  351. [ 0.559540] dynamic_standby enalbe = 0x0.
  352. [ 0.559597] sunxi_reg_init enter
  353. [ 0.559922] lock super standby for a83!
  354. [ 0.559954] lookup_scene_lock_name: new scene lock super_standby
  355. [ 0.559983] scene_lock_init name=super_standby
  356. [ 0.560066] scene_lock: super_standby, type 5, count 1
  357. [ 0.562002] highmem bounce pool size: 64 pages
  358. [ 0.570069] VFS: Disk quotas dquot_6.5.2
  359. [ 0.570447] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  360. [ 0.572623] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  361. [ 0.574492] NTFS driver 2.1.30 [Flags: R/W].
  362. [ 0.574922] fuse init (API version 7.18)
  363. [ 0.575598] msgmni has been set to 1176
  364. [ 0.583829] alg: No test for stdrng (krng)
  365. [ 0.668041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  366. [ 0.668098] io scheduler noop registered
  367. [ 0.668122] io scheduler deadline registered
  368. [ 0.668324] io scheduler cfq registered (default)
  369. [ 0.668842] pwm module init!
  370. [ 0.669458] [DISP]disp_module_init
  371. [ 0.730553] [DISP] Fb_map_kernel_logo,line:893:Fb_map_kernel_logo failed!
  372. [ 0.763733] Console: switching to colour frame buffer device 240x67
  373. [ 0.796807] [DISP]disp_module_init finish
  374. [ 0.871758] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  375. [ 0.871959] sw_uart_pm()890 - uart0 clk is already enable
  376. [ 0.872120] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
  377. [ 1.065002] console [ttyS0] enabled
  378. [ 1.504754] axp81x_dcdc1: Failed to create debugfs directory
  379. [ 1.900522] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  380. [ 2.275880] axp81x_dcdc1: Failed to create debugfs directory
  381. [ 2.675233] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  382. [ 2.847605] brd: module loaded
  383. [ 2.861610] loop: module loaded
  384. [ 2.871581] [rf_pm]: select module num is 10
  385. [ 2.882546] [rf_pm]: module power1 name vcc-wifi-io
  386. [ 2.894151] [rf_pm]: failed to fetch module_power1_vol
  387. [ 2.905992] [rf_pm]: module power2 name
  388. [ 2.916390] [rf_pm]: failed to fetch module_power2_vol
  389. [ 2.928115] [rf_pm]: module power3 name
  390. [ 2.938427] [rf_pm]: failed to fetch module_power3_vol
  391. [ 2.950076] [rf_pm]: mod has no power_switch gpio
  392. [ 2.961206] [rf_pm]: mod has no chip_en gpio
  393. [ 2.971774] [rf_pm]: lpo_use_apclk: ac10032k2
  394. [ 2.982498] [rf_pm]: get power regulator failed.
  395. [ 2.993493] [rf_pm]: enable vcc-wifi-io.
  396. [ 3.004189] [rf_pm]: mod info power switch -1
  397. [ 3.014920] [rf_pm]: set ac10032k2 32k out
  398. [ 3.025359] scene_lock_init name=rf_pm
  399. [ 3.035538] [wifi_pm]: wifi gpio init is OK !!
  400. [ 3.046241] [rfkill]: mod has no ls_int gpio
  401. [ 3.056632] [rfkill]: mod has no pcm_ch gpio
  402. [ 3.067323] [rfkill]: rfkill set power 0
  403. [ 3.090090] Loading iSCSI transport class v2.0-870.
  404. [ 3.101652] iscsi: registered transport (tcp)
  405. [ 3.112713] [spi]: Found 1 spi devices in config files
  406. [ 3.124229] boards_num modalias max_spd_hz bus_num cs mode
  407. [ 3.138433] 0 m25p32 33000000 0 0 0
  408. [ 3.154227] usbcore: registered new interface driver qf9700
  409. [ 3.166412] usbcore: registered new interface driver smsc95xx
  410. [ 3.178741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  411. [ 3.212144] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  412. [ 3.227173] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
  413. [ 3.242647] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
  414. [ 3.270058] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
  415. [ 3.282762] ehci_irq: highspeed device connect
  416. [ 3.293925] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  417. [ 3.307648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  418. [ 3.321878] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  419. [ 3.336426] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
  420. [ 3.350043] usb usb1: SerialNumber: sunxi-ehci
  421. [ 3.361913] hub 1-0:1.0: USB hub found
  422. [ 3.372249] hub 1-0:1.0: 1 port detected
  423. [ 3.383191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  424. [ 3.416361] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  425. [ 3.431186] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
  426. [ 3.445957] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
  427. [ 3.514189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  428. [ 3.528025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  429. [ 3.542420] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  430. [ 3.556740] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
  431. [ 3.570506] usb usb2: SerialNumber: sunxi-ohci
  432. [ 3.582405] hub 2-0:1.0: USB hub found
  433. [ 3.592940] hub 2-0:1.0: 1 port detected
  434. [ 3.603977] Initializing USB Mass Storage driver...
  435. [ 3.615790] usbcore: registered new interface driver usb-storage
  436. [ 3.628744] USB Mass Storage support registered.
  437. [ 3.640182] usbcore: registered new interface driver ums-alauda
  438. [ 3.653063] usbcore: registered new interface driver ums-cypress
  439. [ 3.665919] usbcore: registered new interface driver ums-datafab
  440. [ 3.678685] usbcore: registered new interface driver ums_eneub6250
  441. [ 3.691567] usbcore: registered new interface driver ums-freecom
  442. [ 3.700123] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
  443. [ 3.717552] usbcore: registered new interface driver ums-isd200
  444. [ 3.730077] usbcore: registered new interface driver ums-jumpshot
  445. [ 3.742814] usbcore: registered new interface driver ums-karma
  446. [ 3.755176] usbcore: registered new interface driver ums-onetouch
  447. [ 3.767803] usbcore: registered new interface driver ums-realtek
  448. [ 3.780279] usbcore: registered new interface driver ums-sddr09
  449. [ 3.792615] usbcore: registered new interface driver ums-sddr55
  450. [ 3.804882] usbcore: registered new interface driver ums-usbat
  451. [ 3.817085] usbcore: registered new interface driver usbserial
  452. [ 3.829168] usbcore: registered new interface driver usbserial_generic
  453. [ 3.841971] USB Serial support registered for generic
  454. [ 3.860674] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  455. [ 3.873798] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  456. [ 3.887429] usb 1-1: Product: USB 2.0 Hub
  457. [ 3.898192] hub 1-1:1.0: USB hub found
  458. [ 3.908169] hub 1-1:1.0: 4 ports detected
  459. [ 3.919485] usbserial: USB Serial Driver core
  460. [ 3.930345] file system registered
  461. [ 3.941782] android_usb gadget: Mass Storage Function, version: 2009/09/11
  462. [ 3.955258] android_usb gadget: Number of LUNs=3
  463. [ 3.966198] lun0: LUN: removable file: (no medium)
  464. [ 3.977464] lun1: LUN: removable file: (no medium)
  465. [ 3.988662] lun2: LUN: removable file: (no medium)
  466. [ 4.000182] get usb_serial_number success from boot command line
  467. [ 4.006830] android_usb gadget: android_usb ready
  468. [ 4.024116] axp81x_dcdc1: Failed to create debugfs directory
  469. [ 4.036364] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
  470. [ 4.049046] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
  471. [ 4.064203] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  472. [ 4.077633] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  473. [ 4.091579] usb usb3: Product: sunxi_hcd host driver
  474. [ 4.102912] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
  475. [ 4.116603] usb usb3: SerialNumber: sunxi_hcd_host0
  476. [ 4.128504] hub 3-0:1.0: USB hub found
  477. [ 4.138501] hub 3-0:1.0: 1 port detected
  478. [ 4.149684] mousedev: PS/2 mouse device common for all mice
  479. [ 4.162072] sunxikbd_script_init: key para not found, used default para.
  480. [ 4.176343] sunxi_rtc_init(796): sunxi rtc device register!
  481. [ 4.176443] keyname:ctp_para subname:ctp_power_io ,get error!
  482. [ 4.201179] get sysconfig para erro!
  483. [ 4.210926] rtc_gettime(333): read time 1970-1-1 1:0:11
  484. [ 4.210934] get sysconfig para erro!
  485. [ 4.210954] get sysconfig para erro!
  486. [ 4.210974] get sysconfig para erro!
  487. [ 4.211022] ctp_wakeup: !!!!gpio data 1
  488. [ 4.261384] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
  489. [ 4.274649] rtc_gettime(333): read time 1970-1-1 1:0:11
  490. [ 4.286288] rtc0 rtc0: rtc core: registered rtc0 as rtc0
  491. [ 4.297947] sunxi_rtc_probe(756)!
  492. [ 4.307155] i2c /dev entries driver
  493. [ 4.317120] IR RC5(x) protocol handler initialized
  494. [ 4.320103] get_device_para_value:get subname:icn83xx_ts error! val.val:0
  495. [ 4.320114] get_detect_list: script_get_item err.support_number = 11.
  496. [ 4.320127] get_device_para_value:get subname:gt818_ts error! val.val:0
  497. [ 4.320137] get_detect_list: script_get_item err.support_number = 8.
  498. [ 4.320147] get_device_para_value:get subname:tu_ts error! val.val:0
  499. [ 4.320156] get_detect_list: script_get_item err.support_number = 7.
  500. [ 4.320167] get_device_para_value:get subname:gt9xxf_ts error! val.val:0
  501. [ 4.320176] get_detect_list: script_get_item err.support_number = 6.
  502. [ 4.320189] get_device_para_value:get subname:gslX680new error! val.val:0
  503. [ 4.320198] get_detect_list: script_get_item err.support_number = 3.
  504. [ 4.320246] sw_get_write_info:open error ....IS(filp):1
  505. [ 4.320269] sw_set_write_info:open error ....IS(filp):1
  506. [ 4.320277] get write info erro!
  507. [ 4.490388] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  508. [ 4.490647] sunxi cedar version 0.1
  509. [ 4.490740] [cedar]: install start!!!
  510. [ 4.491008] [cedar]: install end!!!
  511. [ 4.496977] Bluetooth: HCI UART driver ver 2.2
  512. [ 4.496990] Bluetooth: HCI H4 protocol initialized
  513. [ 4.496998] Bluetooth: HCI BCSP protocol initialized
  514. [ 4.497007] Bluetooth: HCI Realtek H5 protocol initialized
  515. [ 4.497702] sunxi_get_soc_bin: slow chip
  516. [ 4.500421] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.113 2015-5-20 17:17) Compiled in Nov 28 2015 at 13:56:38
  517. [ 4.500458] [mmc]: get mmc1's sdc_power is null!
  518. [ 4.500477] [mmc]: get mmc2's 2xmode ok, val = 1
  519. [ 4.500483] [mmc]: get mmc2's ddrmode ok, val = 1
  520. [ 4.500491] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
  521. [ 4.623612] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  522. [ 4.638299] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  523. [ 4.640209] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  524. [ 4.660193] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  525. [ 4.677669] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  526. [ 4.678929] [mmc]: sdc0 fail to get regulator
  527. [ 4.678935] [mmc]: *** sunxi_mci_set_ios(L2159): sdc0 card_power_on fail
  528. [ 4.680206] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  529. [ 4.700036] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  530. [ 4.700197] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
  531. [ 4.720850] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
  532. [ 4.721693] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
  533. [ 4.721717] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  534. [ 4.724195] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  535. [ 4.725618] *******************Try sdio*******************
  536. [ 4.726432] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  537. [ 4.727260] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  538. [ 4.728085] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  539. [ 4.728910] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
  540. [ 4.728931] *******************Try sd *******************
  541. [ 4.729574] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  542. [ 4.729666] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  543. [ 4.732137] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  544. [ 4.791529] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  545. [ 4.791634] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  546. [ 4.796573] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  547. [ 4.796632] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  548. [ 4.796751] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  549. [ 4.796813] mmc0: new high speed SDHC card at address e624
  550. [ 4.797217] mmcblk0: mmc0:e624 SU08G 7.40 GiB
  551. [ 4.798539] mmcblk0: p1 p2
  552. [ 4.799141] *******************sd init ok*******************
  553. [ 4.821103] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  554. [ 4.840031] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  555. [ 4.860840] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
  556. [ 4.861671] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 52, RTO !!
  557. [ 4.861694] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  558. [ 4.864157] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  559. [ 4.866047] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 8, RTO !!
  560. [ 4.866067] *******************Try sdio*******************
  561. [ 4.866882] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  562. [ 4.867709] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  563. [ 4.868534] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  564. [ 4.869359] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 5, RTO !!
  565. [ 4.869378] *******************Try sd *******************
  566. [ 4.870194] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  567. [ 4.871024] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  568. [ 4.871852] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  569. [ 4.872679] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 2 err, cmd 55, RTO !!
  570. [ 4.872699] *******************Try mmc*******************
  571. [ 4.872707] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  572. [ 4.873109] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  573. [ 4.873193] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  574. [ 4.873273] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  575. [ 4.875732] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  576. [ 4.912218] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  577. [ 4.951211] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  578. [ 4.963169] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  579. [ 4.963580] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  580. [ 4.963668] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  581. [ 4.963746] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  582. [ 4.963795] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  583. [ 4.963878] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  584. [ 4.963956] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  585. [ 4.964081] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
  586. [ 4.964152] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  587. [ 4.964202] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  588. [ 4.964270] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  589. [ 4.964345] mmc1: new high speed DDR MMC card at address 0001
  590. [ 4.964697] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB
  591. [ 4.964846] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB
  592. [ 4.964987] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB
  593. [ 4.966425] mmcblk1: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 >
  594. [ 4.966475] mmcblk1: p1 size 10117120 extends beyond EOD, truncated
  595. [ 4.968885] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  596. [ 4.969908] mmcblk1boot1: unknown partition table
  597. [ 4.970555] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
  598. [ 4.971699] mmcblk1boot0: unknown partition table
  599. [ 4.971943] *******************mmc init ok *******************
  600. [ 5.052244] sunxi_leds_fetch_sysconfig_para leds is not used in config
  601. [ 5.193122] =========script_get_err============
  602. [ 5.328565] Registered led device: sunxi_respiration_lamp
  603. [ 5.456634] usbcore: registered new interface driver usbhid
  604. [ 5.589801] usbhid: USB HID core driver
  605. [ 5.627592] ac100_probe,line:2917
  606. [ 5.652400] asoc: ac100-aif1 <-> pri_dai mapping ok
  607. [ 5.661272] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  608. [ 5.670311] ------------audio_hmic_irq----------
  609. [ 5.679908] asoc: ac100-aif1 <-> sec_dai mapping ok
  610. [ 5.692085] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
  611. [ 5.701369] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
  612. [ 5.715463] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  613. [ 5.725579] IPv4 over IPv4 tunneling driver
  614. [ 5.733827] TCP: cubic registered
  615. [ 5.740543] Initializing XFRM netlink socket
  616. [ 5.748673] NET: Registered protocol family 10
  617. [ 5.757344] IPv6 over IPv4 tunneling driver
  618. [ 5.765484] NET: Registered protocol family 17
  619. [ 5.773389] NET: Registered protocol family 15
  620. [ 5.781435] Bluetooth: RFCOMM TTY layer initialized
  621. [ 5.789757] Bluetooth: RFCOMM socket layer initialized
  622. [ 5.798347] Bluetooth: RFCOMM ver 1.11
  623. [ 5.805324] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  624. [ 5.814093] Bluetooth: BNEP filters: protocol multicast
  625. [ 5.822806] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  626. [ 5.832415] lib80211: common routines for IEEE802.11 drivers
  627. [ 5.841629] lib80211_crypt: registered algorithm 'NULL'
  628. [ 5.850490] Registering the dns_resolver key type
  629. [ 5.859104] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  630. [ 5.870721] ThumbEE CPU extension supported.
  631. [ 5.878554] Registering SWP/SWPB emulation handler
  632. [ 5.886988] sunxi_bootup_extend_init: bootup extend disable(default)
  633. [ 5.897954] cmdline,disp=40a0000
  634. [ 5.904754] [HDMI] power vcc-hdmi-18
  635. [ 5.913218] rtc_gettime(333): read time 1970-1-1 1:0:13
  636. [ 5.922285] rtc0 rtc0: setting system clock to 1970-01-01 01:00:13 UTC (3613)
  637. [ 5.934373] sunxi_get_soc_bin: slow chip
  638. [ 5.942488] CPU Budget:Register notifier
  639. [ 5.950067] CPU Budget:register Success
  640. [ 5.957524] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
  641. [ 5.974490] =========GPS========= :gsp not used in configuration
  642. [ 5.984593] ALSA device list:
  643. [ 5.991272] #0: snddaudio
  644. [ 5.997741] #1: sndhdmi
  645. [ 6.009447] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  646. [ 6.150626] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  647. [ 6.510061] [DISP] disp_hdmi_set_detect,line:404:hdmi1's mgr is NULL
  648. [ 6.520050] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
  649. [ 6.656906] EXT4-fs (mmcblk0p2): recovery complete
  650. [ 6.667401] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  651. [ 6.680251] VFS: Mounted root (ext4 filesystem) on device 179:2.
  652. [ 6.691620] devtmpfs: mounted
  653. [ 6.699122] Freeing init memory: 336K
  654. [ 6.707034] Failed to execute /init. Attempting defaults...
  655. [ 7.420208] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  656. [ 7.444789] systemd[1]: Detected architecture arm.
  657. [ 7.468759] systemd[1]: Set hostname to <OrangePI>.
  658. [ 7.756331] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  659. [ 7.768844] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  660. [ 7.786936] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  661. [ 7.801493] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  662. [ 7.820048] systemd[1]: Created slice Root Slice.
  663. [ 7.829384] systemd[1]: Starting Root Slice.
  664. [ 7.888627] systemd[1]: Listening on Journal Audit Socket.
  665. [ 7.904220] systemd[1]: Created slice User and Session Slice.
  666. [ 7.914813] systemd[1]: Starting User and Session Slice.
  667. [ 7.929975] systemd[1]: Created slice System Slice.
  668. [ 7.939662] systemd[1]: Starting System Slice.
  669. [ 7.953955] systemd[1]: Created slice system-getty.slice.
  670. [ 7.964218] systemd[1]: Starting system-getty.slice.
  671. [ 7.979103] systemd[1]: Created slice system-serial\x2dgetty.slice.
  672. [ 7.990446] systemd[1]: Starting system-serial\x2dgetty.slice.
  673. [ 8.006222] systemd[1]: Listening on Delayed Shutdown Socket.
  674. [ 8.017040] systemd[1]: Starting Delayed Shutdown Socket.
  675. [ 8.032570] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  676. [ 8.044911] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  677. [ 8.061991] systemd[1]: Listening on Journal Socket (/dev/log).
  678. [ 8.073132] systemd[1]: Starting Journal Socket (/dev/log).
  679. [ 8.088835] systemd[1]: Listening on udev Kernel Socket.
  680. [ 8.099250] systemd[1]: Starting udev Kernel Socket.
  681. [ 8.114098] systemd[1]: Reached target Swap.
  682. [ 8.123321] systemd[1]: Starting Swap.
  683. [ 8.136870] systemd[1]: Listening on Journal Socket.
  684. [ 8.146837] systemd[1]: Starting Journal Socket.
  685. [ 8.280684] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  686. [ 8.450327] systemd[1]: Mounting Debug File System...
  687. [ 8.660762] systemd[1]: Starting Journal Service...
  688. [ 8.676196] systemd[1]: Mounted Huge Pages File System.
  689. [ 8.860729] systemd[1]: Starting Load Kernel Modules...
  690. [ 9.003713] failed to get normal led pin assign
  691. [ 9.013322] failed to get standby led pin assign
  692. [ 9.022825] gpio_pin_1(229) gpio_request
  693. [ 9.031724] gpio_pin_2(228) gpio_request
  694. [ 9.040468] gpio_pin_3(362) gpio_request
  695. [ 9.049131] gpio_pin_4(68) gpio_request
  696. [ 9.057715] gpio_pin_5(71) gpio_request
  697. [ 9.066235] gpio_pin_6(81) gpio_request
  698. [ 9.074543] gpio_pin_7(64) gpio_request
  699. [ 9.082682] gpio_pin_8(65) gpio_request
  700. [ 9.090769] gpio_pin_9(66) gpio_request
  701. [ 9.098814] gpio_pin_10(227) gpio_request
  702. [ 9.107074] gpio_pin_11(82) gpio_request
  703. [ 9.115222] gpio_pin_12(202) gpio_request
  704. [ 9.123423] gpio_pin_13(203) gpio_request
  705. [ 9.131633] gpio_pin_14(204) gpio_request
  706. [ 9.139681] gpio_pin_15(132) gpio_request
  707. [ 9.140806] systemd[1]: Starting Setup Virtual Console...
  708. [ 9.157220] gpio_pin_16(32) gpio_request
  709. [ 9.157327] gpio_pin_17(33) gpio_request
  710. [ 9.157428] gpio_pin_18(35) gpio_request
  711. [ 9.157551] gpio_pin_19(34) gpio_request
  712. [ 9.157650] gpio_pin_20(360) gpio_request
  713. [ 9.157770] gpio_pin_21(361) gpio_request
  714. [ 9.157875] gpio_pin_22(67) gpio_request
  715. [ 9.157970] gpio_pin_23(234) gpio_request
  716. [ 9.158063] gpio_pin_24(226) gpio_request
  717. [ 9.158157] gpio_pin_25(205) gpio_request
  718. [ 9.158263] gpio_pin_26(133) gpio_request
  719. [ 9.158357] gpio_pin_27(146) gpio_request
  720. [ 9.158449] gpio_pin_28(147) gpio_request
  721. [ 9.158541] gpio_pin_29(121) gpio_request
  722. [ 9.158652] gpio_pin_30(111) gpio_request
  723. [ 9.158894] gpio name is PH5, ret = 0
  724. [ 9.159036] gpio name is PH4, ret = 0
  725. [ 9.159136] gpio name is PL10, ret = 0
  726. [ 9.159243] gpio name is PC4, ret = 0
  727. [ 9.159335] gpio name is PC7, ret = 0
  728. [ 9.159436] gpio name is PC17, ret = 0
  729. [ 9.159532] gpio name is PC0, ret = 0
  730. [ 9.159626] gpio name is PC1, ret = 0
  731. <4>[ 9.159725] gpio name is PC2, ret = 0
  732. [ 9.159819] gpio name is PH3, ret = 0
  733. [ 9.159923] gpio name is PC18, ret = 0
  734. [ 9.160062] gpio name is PG10, ret = 0
  735. [ 9.160174] gpio name is PG11, ret = 0
  736. [ 9.160273] gpio name is PG12, ret = 0
  737. [ 9.160377] gpio name is PE4, ret = 0
  738. [ 9.160482] gpio name is PB0, ret = 0
  739. [ 9.160597] gpio name is PB1, ret = 0
  740. [ 9.160704] gpio name is PB3, ret = 0
  741. [ 9.160802] gpio name is PB2, ret = 0
  742. [ 9.160892] gpio name is PL8, ret = 0
  743. [ 9.160993] gpio name is PL9, ret = 0
  744. [ 9.161087] gpio name is PC3, ret = 0
  745. [ 9.161177] gpio name is PH10, ret = 0
  746. [ 9.161281] gpio name is PH2, ret = 0
  747. [ 9.161377] gpio name is PG13, ret = 0
  748. [ 9.161479] gpio name is PE5, ret = 0
  749. [ 9.161569] gpio name is PE18, ret = 0
  750. [ 9.161670] gpio name is PE19, ret = 0
  751. [ 9.161764] gpio name is PD25, ret = 0
  752. [ 9.161865] gpio name is PD15, ret = 0
  753. [ 9.161984] gpio_init finish with uesd 1!
  754. [ 9.465829] systemd[1]: Started Set Up Additional Binary Formats.
  755. [ 9.560451] systemd[1]: Starting LSB: Set keymap...
  756. [ 9.569794] systemd[1]: Mounted POSIX Message Queue File System.
  757. [ 9.580527] systemd[1]: Reached target Encrypted Volumes.
  758. [ 9.588337] systemd[1]: Starting Encrypted Volumes.
  759. [ 9.597866] systemd[1]: Reached target Slices.
  760. [ 9.604699] systemd[1]: Starting Slices.
  761. [ 9.613252] systemd[1]: Reached target Remote File Systems (Pre).
  762. [ 9.622069] systemd[1]: Starting Remote File Systems (Pre).
  763. [ 9.633002] systemd[1]: Listening on udev Control Socket.
  764. [ 9.641089] systemd[1]: Starting udev Control Socket.
  765. [ 9.840640] systemd[1]: Starting udev Coldplug all Devices...
  766. [ 9.854525] systemd[1]: Listening on fsck to fsckd communication Socket.
  767. [ 9.864248] systemd[1]: Starting fsck to fsckd communication Socket.
  768. [ 9.873614] systemd[1]: Started File System Check on Root Device.
  769. [ 10.020685] systemd[1]: Starting Remount Root and Kernel File Systems...
  770. [ 10.106349] systemd[1]: Mounted Debug File System.
  771. [ 10.117992] systemd[1]: Started Journal Service.
  772. [ 10.505282] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  773. [ 12.060253] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
  774. [ 12.182324] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0718
  775. [ 12.193317] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
  776. [ 12.204708] usb 1-1.1: Product: USB Storage
  777. [ 12.212695] usb 1-1.1: SerialNumber: 000000000033
  778. [ 12.223306] scsi0 : usb-storage 1-1.1:1.0
  779. [ 13.237822] sd 0:0:0:0: [sda] Asking for cache data failed
  780. [ 13.237830] sd 0:0:0:0: [sda] Assuming drive cache: write through
  781. [ 13.242687] sd 0:0:0:0: [sda] Asking for cache data failed
  782. [ 13.242694] sd 0:0:0:0: [sda] Assuming drive cache: write through
  783. [ 14.473224] mmcblk1: error -110 sending status command, retrying
  784. [ 14.484163] mmcblk1: timed out sending r/w cmd command, card status 0x900
  785. [ 14.484178] mmcblk1: status not valid, retrying timeout
  786. [ 14.632431] mmcblk1: error -110 sending status command, retrying
  787. [ 14.643296] mmcblk1: timed out sending r/w cmd command, card status 0x900
  788. [ 14.643306] mmcblk1: status not valid, retrying timeout
  789. [ 14.652959] mmcblk1: error -110 sending status command, retrying
  790. [ 14.653038] mmcblk1: timed out sending r/w cmd command, card status 0x900
  791. [ 14.653049] mmcblk1: status not valid, retrying timeout
  792. [ 14.682755] mmcblk1: error -110 sending status command, retrying
  793. [ 14.682838] mmcblk1: timed out sending r/w cmd command, card status 0x900
  794. [ 14.682845] mmcblk1: status not valid, retrying timeout
  795. [ 14.701341] mmcblk1: error -110 sending status command, retrying
  796. [ 14.701403] mmcblk1: timed out sending r/w cmd command, card status 0x900
  797. [ 14.701415] mmcblk1: status not valid, retrying timeout
  798.  
  799. Ubuntu 15.04 OrangePI ttyS0
  800.  
  801. OrangePI login:
RAW Paste Data