Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- otalpages: 196495
- free_area_init_node: node 0, pgdat c12ce8a0, node_mem_map c1343000
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3967 pages, LIFO batch:0
- Normal zone: 1504 pages used for memmap
- Normal zone: 190992 pages, LIFO batch:31
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x4008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
- ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- nr_irqs_gsi: 24
- Allocating PCI resources starting at 30000000 (gap: 30000000:cec00000)
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194959
- Kernel command line: root=/dev/sda2 rootfstype=ext2 rootwait console=tty0 console=ttyS0,38400n8 noinitrd reboot=bios
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- Memory: 775412k/786368k available (2209k kernel code, 10300k reserved, 676k data, 300k init, 0k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
- vmalloc : 0xf07f0000 - 0xfffa1000 ( 247 MB)
- lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
- .init : 0xc12d2000 - 0xc131d000 ( 300 kB)
- .data : 0xc122857d - 0xc12d16a0 ( 676 kB)
- .text : 0xc1000000 - 0xc122857d (2209 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- Hierarchical RCU implementation.
- NR_IRQS:288
- CPU 0 irqstacks, hard=c12a4000 soft=c12a5000
- Console: colour dummy device 80x25
- console [tty0] enabled
- console [ttyS0] enabled
- Fast TSC calibration using PIT
- Detected 2020.187 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4040.37 BogoMIPS (lpj=20201870)
- Mount-cache hash table entries: 512
- CPU: Trace cache: 12K uops, L1 D cache: 8K
- CPU: L2 cache: 128K
- mce: CPU supports 4 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
- Checking 'hlt' instruction... OK.
- ACPI: Core revision 20090903
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: PCI BIOS revision 2.10 entry at 0xfa100, last bus=2
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
- pci 0000:00:1f.0: quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: region 4080-40bf claimed by ICH4 GPIO
- pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
- pci 0000:00:1f.2: reg 20 io port: [0xd000-0xd01f]
- pci 0000:00:1f.3: reg 20 io port: [0x5000-0x500f]
- pci 0000:00:1f.4: reg 20 io port: [0xd800-0xd81f]
- pci 0000:00:1f.5: reg 10 io port: [0xdc00-0xdcff]
- pci 0000:00:1f.5: reg 14 io port: [0xe000-0xe03f]
- pci 0000:02:01.0: reg 10 32bit mmio: [0xe8000000-0xe800ffff]
- pci 0000:02:02.0: reg 10 io port: [0xc000-0xc0ff]
- pci 0000:02:02.0: reg 14 32bit mmio: [0xe8010000-0xe80100ff]
- pci 0000:02:02.0: supports D1 D2
- pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:02:02.0: PME# disabled
- pci 0000:02:03.0: reg 10 io port: [0xc400-0xc4ff]
- pci 0000:02:03.0: reg 14 32bit mmio: [0xe8011000-0xe80110ff]
- pci 0000:02:03.0: supports D1 D2
- pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:02:03.0: PME# disabled
- pci 0000:02:04.0: reg 10 io port: [0xc800-0xc8ff]
- pci 0000:02:04.0: reg 14 32bit mmio: [0xe8012000-0xe80120ff]
- pci 0000:02:04.0: supports D1 D2
- pci 0000:02:04.0: PME# supported from D1 D2 D3hot D3cold
- pci 0000:02:04.0: PME# disabled
- pci 0000:00:1e.0: transparent bridge
- pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
- pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xe80fffff]
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
- SCSI subsystem initialized
- libata version 3.00 loaded.
- PCI: Using ACPI for IRQ routing
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 12 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:02: ioport range 0x4d0-0x4d1 has been reserved
- system 00:02: ioport range 0x290-0x29f has been reserved
- system 00:02: ioport range 0x800-0x805 has been reserved
- pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:01.0: IO window: disabled
- pci 0000:00:01.0: MEM window: disabled
- pci 0000:00:01.0: PREFETCH window: disabled
- pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
- pci 0000:00:1e.0: IO window: 0xc000-0xcfff
- pci 0000:00:1e.0: MEM window: 0xe8000000-0xe80fffff
- pci 0000:00:1e.0: PREFETCH window: disabled
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
- pci_bus 0000:02: resource 1 mem: [0xe8000000-0xe80fffff]
- pci_bus 0000:02: resource 3 io: [0x00-0xffff]
- pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- scx200: NatSemi SCx200 Driver
- microcode: CPU0 sig=0xf27, pf=0x4, revision=0x33
- Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- ------------[ cut here ]------------
- WARNING: at arch/x86/mm/ioremap.c:148 0xc1019a28()
- Hardware name:
- Modules linked in:
- Pid: 1, comm: swapper Not tainted 2.6.32.27 #3
- Call Trace:
- [<c1019a28>] ? 0xc1019a28
- [<c102276f>] ? 0xc102276f
- [<c1019a28>] ? 0xc1019a28
- [<c10227b3>] ? 0xc10227b3
- [<c1019a28>] ? 0xc1019a28
- [<c102882a>] ? 0xc102882a
- [<c12e35c0>] ? 0xc12e35c0
- [<c1019d54>] ? 0xc1019d54
- [<c12e35df>] ? 0xc12e35df
- [<c12e35df>] ? 0xc12e35df
- [<c12e35ba>] ? 0xc12e35ba
- [<c1001062>] ? 0xc1001062
- [<c12d253a>] ? 0xc12d253a
- [<c12d24a0>] ? 0xc12d24a0
- [<c1003327>] ? 0xc1003327
- ---[ end trace a7919e7f17c0a725 ]---
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- Registering mini_fo version $Id$
- JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- msgmni has been set to 1514
- io scheduler noop registered
- io scheduler deadline registered (default)
- processor LNXCPU:00: registered as cooling_device0
- isapnp: Scanning for PnP cards...
- isapnp: No Plug & Play device found
- Real Time Clock Driver v1.12b
- Non-volatile memory driver v1.3
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
- ata_piix 0000:00:1f.1: version 2.13
- ata_piix 0000:00:1f.1: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- cpuidle: using governor ladder
- TCP westwood registered
- NET: Registered protocol family 17
- Bridge firewalling registered
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- Using IPI Shortcut mode
- ata1.00: ATA-6: ST340014A, 3.06, max UDMA/100
- ata1.00: 78165360 sectors, multi 16: LBA48
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2
- sd 0:0:0:0: [sda] Attached SCSI disk
- VFS: Mounted root (ext2 filesystem) readonly on device 8:2.
- Freeing unused kernel memory: 300k freed
- Please be patient, while OpenWrt loads ...
- EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- lib80211: common routines for IEEE802.11 drivers
- lib80211_crypt: registered algorithm 'NULL'
- lib80211_crypt: registered algorithm 'WEP'
- lib80211_crypt: registered algorithm 'CCMP'
- lib80211_crypt: registered algorithm 'TKIP'
- Compat-wireless backport release: compat-wireless-2011-04-14
- Backport based on wireless-testing.git master-2011-04-19
- cfg80211: Calling CRDA to update world regulatory domain
- natsemi dp8381x driver, version 2.1, Sept 11, 2006
- originally by Donald Becker <becker@scyld.com>
- 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
- cfg80211: World regulatory domain updated:
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- ath9k 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- ath: EEPROM regdomain: 0x809c
- ath: EEPROM indicates we should expect a country code
- ath: doing EEPROM country->regdmn map search
- ath: country maps to regdmn code: 0x52
- ath: Country alpha2 being used: CN
- ath: Regpair used: 0x52
- ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- Registered led device: ath9k-phy0
- ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xf0c00000, irq=21
- cfg80211: Calling CRDA for country: CN
- NET: Registered protocol family 15
- Initializing XFRM netlink socket
- PPP generic driver version 2.4.2
- cfg80211: Regulatory domain changed to country: CN
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
- bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
- Global Configuration Unit Driver - version 1.0.0
- Copyright (c) 1999-2007 Intel Corporation.
- Gigabit Ethernet Controller Driver - version 1.0.0-K28-NAPI
- Copyright (c) 1999-2009 Intel Corporation.
- ip_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 24
- nf_conntrack version 0.5.0 (12124 buckets, 48496 max)
- CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- xt_time: kernel timezone is -0000
- IMQ driver loaded successfully.
- Hooking IMQ before NAT on PREROUTING.
- Hooking IMQ after NAT on POSTROUTING.
- ip_set version 4 loaded
- arp_tables: (C) 2002 David S. Miller
- Ebtables v2.0 registered
- 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- 8139cp 0000:02:04.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- 8139too Fast Ethernet driver 0.9.28
- 8139too 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- eth0: RealTek RTL8139 at 0xc000, 00:02:44:53:ef:d7, IRQ 22
- 8139too 0000:02:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- eth1: RealTek RTL8139 at 0xc400, 00:50:fc:fd:76:45, IRQ 16
- 8139too 0000:02:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- eth2: RealTek RTL8139 at 0xc800, 00:40:f4:b5:6d:86, IRQ 18
- e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- e100: Copyright(c) 1999-2006 Intel Corporation
- Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
- Copyright (c) 1999-2006 Intel Corporation.
- e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
- e1000e: Copyright (c) 1999-2008 Intel Corporation.
- eth0: link down
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
- device eth0 entered promiscuous mode
- pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- siit: module license 'unspecified' taints kernel.
- Disabling lock debugging due to kernel taint
- sis900.c: v1.08.10 Apr. 2 2006
- sky2 driver version 1.25
- via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
- eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
- mac80211_hwsim: Initializing radio 0
- ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- ieee80211 phy1: hwaddr 020000000000 registered
- mac80211_hwsim: Initializing radio 1
- ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
- ieee80211 phy2: hwaddr 020000000100 registered
- eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
- device eth2 entered promiscuous mode
- br-lan: port 2(eth2) entering forwarding state
- cfg80211: Calling CRDA for country: DE
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- device wlan0 entered promiscuous mode
- br-lan: port 3(wlan0) entering forwarding state
- cfg80211: Regulatory domain changed to country: DE
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- device wlan0 left promiscuous mode
- br-lan: port 3(wlan0) entering disabled state
- device wlan0 entered promiscuous mode
- br-lan: port 3(wlan0) entering forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement