Guest User

dmesg on Nano after wifi failure

a guest
Mar 23rd, 2020
143
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    2.038815] systemd[1]: Detected architecture arm64.
  2. [    2.063785] systemd[1]: Set hostname to <nvidia>.
  3. [    2.178006] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  4. [    2.178016] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  5. [    2.235368] tegra-pcie 1003000.pcie: link 0 down, retrying
  6. [    2.237437] tegra-pcie 1003000.pcie: link 0 down, ignoring
  7. [    2.327530] random: systemd: uninitialized urandom read (16 bytes read)
  8. [    2.327562] systemd[1]: Reached target User and Group Name Lookups.
  9. [    2.327925] random: systemd: uninitialized urandom read (16 bytes read)
  10. [    2.329784] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  11. [    2.329830] random: systemd: uninitialized urandom read (16 bytes read)
  12. [    2.329951] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  13. [    2.331815] systemd[1]: Created slice System Slice.
  14. [    2.332049] systemd[1]: Listening on fsck to fsckd communication Socket.
  15. [    2.341749] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
  16. [    2.341756] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
  17. [    2.341760] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
  18. [    2.341764] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
  19. [    2.341768] pci_bus 0000:00: root bus resource [bus 00-ff]
  20. [    2.341792] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
  21. [    2.341858] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
  22. [    2.342028] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  23. [    2.342156] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
  24. [    2.342181] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
  25. [    2.342211] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
  26. [    2.342231] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
  27. [    2.342365] pci 0000:01:00.0: supports D1 D2
  28. [    2.342368] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  29. [    2.354656] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  30. [    2.354688] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
  31. [    2.354693] pci 0000:00:02.0: BAR 13: assigned [io  0x1000-0x1fff]
  32. [    2.354701] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
  33. [    2.354720] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
  34. [    2.354736] pci 0000:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
  35. [    2.354744] pci 0000:00:02.0: PCI bridge to [bus 01]
  36. [    2.354748] pci 0000:00:02.0:   bridge window [io  0x1000-0x1fff]
  37. [    2.354753] pci 0000:00:02.0:   bridge window [mem 0x13000000-0x130fffff]
  38. [    2.355052] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
  39. [    2.355057] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  40. [    2.355063] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
  41. [    2.355154] aer 0000:00:02.0:pcie002: service driver aer loaded
  42. [    2.355330] r8168 0000:01:00.0: enabling device (0000 -> 0003)
  43. [    2.355346] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
  44. [    2.367683] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
  45. [    2.369377] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
  46. [    2.369474] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e5:36:2b from device tree
  47. [    2.371965] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
  48. [    2.371983] r8168  Copyright (C) 2017  Realtek NIC software team <nicfae@realtek.com>
  49.                 This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
  50.                 This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
  51. [    2.522737] nvgpu: 57000000.gpu           gm20b_init_clk_setup_sw:1268 [INFO]  GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
  52. [    2.697619] systemd-journald[1969]: Received request to flush runtime journal from PID 1
  53. [    3.635080] random: crng init done
  54. [    3.638515] random: 7 urandom warning(s) missed due to ratelimiting
  55. [    4.434947] using random self ethernet address
  56. [    4.441039] using random host ethernet address
  57. [    4.485545] Mass Storage Function, version: 2009/09/11
  58. [    4.485551] LUN: removable file: (no medium)
  59. [    4.490717] using random self ethernet address
  60. [    4.507775] using random host ethernet address
  61. [    4.558927] rndis0: HOST MAC 62:63:55:13:b6:10
  62. [    4.559164] rndis0: MAC 62:63:55:13:b6:11
  63. [    4.563325] usb0: HOST MAC 62:63:55:13:b6:12
  64. [    4.563552] usb0: MAC 62:63:55:13:b6:13
  65. [    4.563574] tegra-xudc-new 700d0000.xudc: exiting ELPG
  66. [    4.564719] tegra-xudc-new 700d0000.xudc: exiting ELPG done
  67. [    4.564738] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
  68. [    4.564775] tegra-xudc-new 700d0000.xudc: entering ELPG
  69. [    4.565042] tegra-xudc-new 700d0000.xudc: entering ELPG done
  70. [    4.565056] tegra-xudc-new 700d0000.xudc: exiting ELPG
  71. [    4.566353] tegra-xudc-new 700d0000.xudc: exiting ELPG done
  72. [    4.566374] tegra-xudc-new 700d0000.xudc: entering ELPG
  73. [    4.566714] tegra-xudc-new 700d0000.xudc: entering ELPG done
  74. [    4.601094] l4tbr0: port 1(rndis0) entered blocking state
  75. [    4.601100] l4tbr0: port 1(rndis0) entered disabled state
  76. [    4.603299] device rndis0 entered promiscuous mode
  77. [    4.624809] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  78. [    4.634607] l4tbr0: port 2(usb0) entered blocking state
  79. [    4.634612] l4tbr0: port 2(usb0) entered disabled state
  80. [    4.635159] device usb0 entered promiscuous mode
  81. [    4.642535] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  82. [    5.047605] extcon-disp-state extcon:disp-state: cable 47 state 0
  83. [    5.047607] Extcon AUX1(HDMI) disable
  84. [    5.126798] tegradc tegradc.0: blank - powerdown
  85. [    5.129274] extcon-disp-state extcon:disp-state: cable 40 state 0
  86. [    5.129277] Extcon HDMI: HPD disabled
  87. [    5.129300] tegradc tegradc.0: hdmi: unplugged
  88. [    5.245478] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
  89. [    5.245484] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
  90. [    5.575697] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
  91. [    5.606152] tegradc tegradc.0: blank - powerdown
  92. [    5.610384] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411
  93. [    5.610393] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  94. [    5.610396] usb 2-1: Product: 4-Port USB 3.1 Hub
  95. [    5.610400] usb 2-1: Manufacturer: Generic
  96. [    5.616960] hub 2-1:1.0: USB hub found
  97. [    5.618420] hub 2-1:1.0: 4 ports detected
  98. [    5.627359] tegradc tegradc.0: unblank
  99. [    5.671891] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  100. [    5.671975] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  101. [    5.673432] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  102. [    5.673439] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  103. [    5.708405] extcon-disp-state extcon:disp-state: cable 47 state 1
  104. [    5.708408] Extcon AUX1(HDMI) enable
  105. [    5.708778] tegradc tegradc.0: sync windows ret = 250
  106. [    5.730078] extcon-disp-state extcon:disp-state: cable 40 state 1
  107. [    5.730081] Extcon HDMI: HPD enabled
  108. [    5.730121] tegradc tegradc.0: hdmi: plugged
  109. [    5.774566] usb 2-1: usb_suspend_both: status 0
  110. [    5.774743] usb usb2: usb_suspend_both: status 0
  111. [    6.062353] zram: Added device: zram0
  112. [    6.064754] zram: Added device: zram1
  113. [    6.065200] zram: Added device: zram2
  114. [    6.065601] zram: Added device: zram3
  115. [    6.161829] usb 1-2.3: reset high-speed USB device number 3 using tegra-xusb
  116. [    6.164897] zram0: detected capacity change from 0 to 519618560
  117. [    6.198598] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  118. [    6.199729] eth0: 0xffffff800abb1000, 00:04:4b:e5:36:2b, IRQ 405
  119. [    6.208549] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  120. [    6.234024] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  121. [    6.249717] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  122. [    6.250243] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  123. [    6.253257] usbcore: registered new interface driver rt2800usb
  124. [    6.404746] Adding 507436k swap on /dev/zram0.  Priority:5 extents:1 across:507436k SS
  125. [    6.415070] zram1: detected capacity change from 0 to 519618560
  126. [    6.431184] Adding 507436k swap on /dev/zram1.  Priority:5 extents:1 across:507436k SS
  127. [    6.436609] zram2: detected capacity change from 0 to 519618560
  128. [    6.478214] Adding 507436k swap on /dev/zram2.  Priority:5 extents:1 across:507436k SS
  129. [    6.495768] zram3: detected capacity change from 0 to 519618560
  130. [    6.516033] Adding 507436k swap on /dev/zram3.  Priority:5 extents:1 across:507436k SS
  131. [    6.780064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  132. [    6.798433] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  133. [    6.798639] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  134. [    6.863071] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
  135. [    7.105942] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  136. [    7.204817] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  137. [    8.223751] Bridge firewalling registered
  138. [    8.251056] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  139. [    8.299588] tegradc tegradc.0: blank - powerdown
  140. [    8.358306] extcon-disp-state extcon:disp-state: cable 47 state 0
  141. [    8.358309] Extcon AUX1(HDMI) disable
  142. [    8.379196] tegradc tegradc.0: unblank
  143. [    8.395099] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  144. [    8.395190] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  145. [    8.396688] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  146. [    8.396697] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  147. [    8.431783] extcon-disp-state extcon:disp-state: cable 47 state 1
  148. [    8.431786] Extcon AUX1(HDMI) enable
  149. [    8.445229] tegradc tegradc.0: unblank
  150. [    8.445244] tegradc tegradc.1: blank - powerdown
  151. [    8.541947] Netfilter messages via NETLINK v0.30.
  152. [    8.545530] ctnetlink v0.93: registering with nfnetlink.
  153. [    8.742600] usb 1-2.4: new high-speed USB device number 4 using tegra-xusb
  154. [    8.764419] usb 1-2.4: New USB device found, idVendor=12d1, idProduct=14fe
  155. [    8.764426] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  156. [    8.764430] usb 1-2.4: Product: HUAWEI_MOBILE
  157. [    8.764434] usb 1-2.4: Manufacturer: HUAWEI_MOBILE
  158. [    8.764437] usb 1-2.4: SerialNumber: 0123456789ABCDEF
  159. [    8.766115] usb-storage 1-2.4:1.0: USB Mass Storage device detected
  160. [    8.767422] scsi host0: usb-storage 1-2.4:1.0
  161. [    8.780438] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
  162. [    9.281689] fuse init (API version 7.26)
  163. [    9.789040] scsi 0:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
  164. [   10.055327] usb 1-2.4: USB disconnect, device number 4
  165. [   10.426607] usb 1-2.4: new high-speed USB device number 5 using tegra-xusb
  166. [   10.447945] usb 1-2.4: New USB device found, idVendor=12d1, idProduct=1506
  167. [   10.447952] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  168. [   10.447956] usb 1-2.4: Product: HUAWEI_MOBILE
  169. [   10.447959] usb 1-2.4: Manufacturer: HUAWEI_MOBILE
  170. [   10.508806] usbcore: registered new interface driver option
  171. [   10.508855] usbserial: USB Serial support registered for GSM modem (1-port)
  172. [   10.509044] option 1-2.4:1.0: GSM modem (1-port) converter detected
  173. [   10.510350] usb 1-2.4: GSM modem (1-port) converter now attached to ttyUSB0
  174. [   10.510490] option 1-2.4:1.1: GSM modem (1-port) converter detected
  175. [   10.511684] usb 1-2.4: GSM modem (1-port) converter now attached to ttyUSB1
  176. [   10.513310] option 1-2.4:1.2: GSM modem (1-port) converter detected
  177. [   10.513541] usb 1-2.4: GSM modem (1-port) converter now attached to ttyUSB2
  178. [   10.695352] usbcore: registered new interface driver uvcvideo
  179. [   10.695356] USB Video Class driver (1.1.1)
  180. [   12.151998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  181. [   12.186709] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  182. [   19.036707] option 1-2.4:1.3: GSM modem (1-port) converter detected
  183. [   73.255294] usb 1-2.1: new full-speed USB device number 6 using tegra-xusb
  184. [   73.287208] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c52b
  185. [   73.287272] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  186. [   73.287318] usb 1-2.1: Product: USB Receiver
  187. [   73.287361] usb 1-2.1: Manufacturer: Logitech
  188. [   73.362699] logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.1/input2
  189. [   73.507315] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input2
  190. [   73.508135] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.1:1
  191. [  101.699981] tegradc tegradc.0: blank - powerdown
  192. [  101.757033] extcon-disp-state extcon:disp-state: cable 47 state 0
  193. [  101.757046] Extcon AUX1(HDMI) disable
  194. [  101.777093] tegradc tegradc.1: blank - powerdown
  195. [  101.931403] tegradc tegradc.0: blank - powerdown
  196. [  101.931426] tegradc tegradc.0: unblank
  197. [  101.941420] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  198. [  101.941500] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  199. [  101.942952] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  200. [  101.942960] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  201. [  101.979519] extcon-disp-state extcon:disp-state: cable 47 state 1
  202. [  101.979522] Extcon AUX1(HDMI) enable
  203. [  101.992806] tegradc tegradc.0: unblank
  204. [  101.992820] tegradc tegradc.1: blank - powerdown
  205. [  105.286403] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  206. [  105.286416] Bluetooth: BNEP socket layer initialized
  207. [  105.762937] tegradc tegradc.0: unblank
  208. [  105.763099] tegradc tegradc.1: blank - powerdown
  209. [  362.816692] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  210. [  364.972400] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  211. [  365.003241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  212. [  390.558395] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  213. [  390.563050] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  214. [  456.838829] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  215. [  456.858007] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  216. [  457.195691] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  217. [  457.405161] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  218. [  477.184666] wlan0: authenticate with 50:d4:f7:0f:ca:02
  219. [  477.207495] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  220. [  477.210679] wlan0: authenticated
  221. [  477.214578] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  222. [  477.219684] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  223. [  477.225461] wlan0: associated
  224. [  477.251614] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  225. [  531.895116] usbcore: deregistering interface driver uvcvideo
  226. [  531.913997] usbcore: registered new interface driver uvcvideo
  227. [  531.914001] USB Video Class driver (1.1.1)
  228. [  573.871980] usbcore: deregistering interface driver uvcvideo
  229. [  573.891451] usbcore: registered new interface driver uvcvideo
  230. [  573.891455] USB Video Class driver (1.1.1)
  231. [  612.869053] usbcore: deregistering interface driver uvcvideo
  232. [  612.892305] usbcore: registered new interface driver uvcvideo
  233. [  612.892310] USB Video Class driver (1.1.1)
  234. [  669.905448] usbcore: deregistering interface driver uvcvideo
  235. [  669.937909] usbcore: registered new interface driver uvcvideo
  236. [  669.937914] USB Video Class driver (1.1.1)
  237. [  708.901722] usbcore: deregistering interface driver uvcvideo
  238. [  708.920551] usbcore: registered new interface driver uvcvideo
  239. [  708.920555] USB Video Class driver (1.1.1)
  240. [  756.925541] usbcore: deregistering interface driver uvcvideo
  241. [  756.950275] usbcore: registered new interface driver uvcvideo
  242. [  756.950279] USB Video Class driver (1.1.1)
  243. [  798.944426] usbcore: deregistering interface driver uvcvideo
  244. [  798.972181] usbcore: registered new interface driver uvcvideo
  245. [  798.972185] USB Video Class driver (1.1.1)
  246. [  834.904699] usbcore: deregistering interface driver uvcvideo
  247. [  834.930835] usbcore: registered new interface driver uvcvideo
  248. [  834.930839] USB Video Class driver (1.1.1)
  249. [  873.885655] usbcore: deregistering interface driver uvcvideo
  250. [  873.909181] usbcore: registered new interface driver uvcvideo
  251. [  873.909185] USB Video Class driver (1.1.1)
  252. [  912.856752] usbcore: deregistering interface driver uvcvideo
  253. [  912.880165] usbcore: registered new interface driver uvcvideo
  254. [  912.880169] USB Video Class driver (1.1.1)
  255. [  969.869798] usbcore: deregistering interface driver uvcvideo
  256. [  969.892999] usbcore: registered new interface driver uvcvideo
  257. [  969.893002] USB Video Class driver (1.1.1)
  258. [ 1017.879922] usbcore: deregistering interface driver uvcvideo
  259. [ 1017.900096] usbcore: registered new interface driver uvcvideo
  260. [ 1017.900100] USB Video Class driver (1.1.1)
  261. [ 1053.872860] usbcore: deregistering interface driver uvcvideo
  262. [ 1053.900211] usbcore: registered new interface driver uvcvideo
  263. [ 1053.900214] USB Video Class driver (1.1.1)
  264. [ 1089.866804] usbcore: deregistering interface driver uvcvideo
  265. [ 1089.890918] usbcore: registered new interface driver uvcvideo
  266. [ 1089.890922] USB Video Class driver (1.1.1)
  267. [ 1143.880097] usbcore: deregistering interface driver uvcvideo
  268. [ 1143.911698] usbcore: registered new interface driver uvcvideo
  269. [ 1143.911703] USB Video Class driver (1.1.1)
  270. [ 1200.876300] usbcore: deregistering interface driver uvcvideo
  271. [ 1200.900539] usbcore: registered new interface driver uvcvideo
  272. [ 1200.900542] USB Video Class driver (1.1.1)
  273. [ 1251.883889] usbcore: deregistering interface driver uvcvideo
  274. [ 1251.909463] usbcore: registered new interface driver uvcvideo
  275. [ 1251.909468] USB Video Class driver (1.1.1)
  276. [ 1293.869421] usbcore: deregistering interface driver uvcvideo
  277. [ 1293.892550] usbcore: registered new interface driver uvcvideo
  278. [ 1293.892555] USB Video Class driver (1.1.1)
  279. [ 1335.870819] usbcore: deregistering interface driver uvcvideo
  280. [ 1335.899926] usbcore: registered new interface driver uvcvideo
  281. [ 1335.899932] USB Video Class driver (1.1.1)
  282. [ 1374.859076] usbcore: deregistering interface driver uvcvideo
  283. [ 1374.878096] usbcore: registered new interface driver uvcvideo
  284. [ 1374.878101] USB Video Class driver (1.1.1)
  285. [ 1425.865196] usbcore: deregistering interface driver uvcvideo
  286. [ 1425.889524] usbcore: registered new interface driver uvcvideo
  287. [ 1425.889528] USB Video Class driver (1.1.1)
  288. [ 1432.905401] usb 1-2.1: USB disconnect, device number 6
  289. [ 1442.852661] usb usb2: usb_suspend_both: status -16
  290. [ 1443.072726] usb 2-1.1: new SuperSpeed USB device number 3 using tegra-xusb
  291. [ 1443.106690] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0411
  292. [ 1443.106698] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  293. [ 1443.106702] usb 2-1.1: Product: 4-Port USB 3.0 Hub
  294. [ 1443.106705] usb 2-1.1: Manufacturer: Generic
  295. [ 1443.111112] hub 2-1.1:1.0: USB hub found
  296. [ 1443.112463] hub 2-1.1:1.0: 4 ports detected
  297. [ 1443.175156] usb 1-2.1: new high-speed USB device number 7 using tegra-xusb
  298. [ 1443.208434] usb 1-2.1: New USB device found, idVendor=0bda, idProduct=5411
  299. [ 1443.208441] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  300. [ 1443.208445] usb 1-2.1: Product: 4-Port USB 2.0 Hub
  301. [ 1443.208448] usb 1-2.1: Manufacturer: Generic
  302. [ 1443.210002] hub 1-2.1:1.0: USB hub found
  303. [ 1443.210859] hub 1-2.1:1.0: 4 ports detected
  304. [ 1443.243183] usb 2-1.1: usb_suspend_both: status 0
  305. [ 1443.291171] usb 2-1: usb_suspend_both: status 0
  306. [ 1443.291350] usb usb2: usb_suspend_both: status 0
  307. [ 1443.499197] usb 1-2.1.1: new high-speed USB device number 8 using tegra-xusb
  308. [ 1443.558296] usb 1-2.1.1: New USB device found, idVendor=05a3, idProduct=9422
  309. [ 1443.558302] usb 1-2.1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
  310. [ 1443.558307] usb 1-2.1.1: Product: H264 USB Camera
  311. [ 1443.558311] usb 1-2.1.1: Manufacturer: Sonix Technology Co., Ltd.
  312. [ 1443.558314] usb 1-2.1.1: SerialNumber: SN0001
  313. [ 1443.560427] uvcvideo: Found UVC 1.00 device H264 USB Camera (05a3:9422)
  314. [ 1443.560432] uvcvideo: Forcing device quirks to 0x80 by module parameter for testing purpose.
  315. [ 1443.560434] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list.
  316. [ 1443.595504] uvcvideo: Unable to create debugfs 1-8 directory.
  317. [ 1443.595720] uvcvideo 1-2.1.1:1.0: Entity type for entity Extension 4 was not initialized!
  318. [ 1443.604220] uvcvideo 1-2.1.1:1.0: Entity type for entity Extension 3 was not initialized!
  319. [ 1443.612526] uvcvideo 1-2.1.1:1.0: Entity type for entity Processing 2 was not initialized!
  320. [ 1443.620984] uvcvideo 1-2.1.1:1.0: Entity type for entity Camera 1 was not initialized!
  321. [ 1443.629900] input: H264 USB Camera as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/input/input3
  322. [ 1443.653529] usb 1-2.1.1: 4:1: cannot get freq at ep 0x84
  323. [ 1443.879188] usb 1-2.1.4: new full-speed USB device number 9 using tegra-xusb
  324. [ 1443.904850] usb 1-2.1.4: New USB device found, idVendor=046d, idProduct=c52b
  325. [ 1443.904857] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  326. [ 1443.904861] usb 1-2.1.4: Product: USB Receiver
  327. [ 1443.904865] usb 1-2.1.4: Manufacturer: Logitech
  328. [ 1443.918721] logitech-djreceiver 0003:046D:C52B.0007: hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.1.4/input2
  329. [ 1444.042919] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.2/0003:046D:C52B.0007/0003:046D:404D.0008/input/input4
  330. [ 1444.044155] logitech-hidpp-device 0003:046D:404D.0008: input,hidraw2: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.1.4:1
  331. [ 1444.285903] usb 1-2.1.1: 4:1: cannot get freq at ep 0x84
  332. [ 1444.387038] usb 1-2.1.1: 4:1: cannot get freq at ep 0x84
  333. [ 1452.124031] usb 1-2.1.1: usb_suspend_both: status 0
  334. [ 1484.839786] extcon-disp-state extcon:disp-state: cable 47 state 0
  335. [ 1484.839796] Extcon AUX1(HDMI) disable
  336. [ 1484.858448] tegradc tegradc.0: blank - powerdown
  337. [ 1484.860920] extcon-disp-state extcon:disp-state: cable 40 state 0
  338. [ 1484.860925] Extcon HDMI: HPD disabled
  339. [ 1484.860955] tegradc tegradc.0: hdmi: unplugged
  340. [ 1484.869612] tegradc tegradc.0: blank - powerdown
  341. [ 1484.869623] tegradc tegradc.0: unblank
  342. [ 1484.869652] tegradc tegradc.0: unblank
  343. [ 1484.869660] tegradc tegradc.1: blank - powerdown
  344. [ 1485.378244] tegradc tegradc.0: blank - powerdown
  345. [ 1485.378260] tegradc tegradc.0: unblank
  346. [ 1485.394271] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  347. [ 1485.394420] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  348. [ 1485.396116] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  349. [ 1485.396124] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  350. [ 1485.431014] extcon-disp-state extcon:disp-state: cable 47 state 1
  351. [ 1485.431017] Extcon AUX1(HDMI) enable
  352. [ 1485.431250] extcon-disp-state extcon:disp-state: cable 40 state 1
  353. [ 1485.431253] Extcon HDMI: HPD enabled
  354. [ 1485.431283] tegradc tegradc.0: hdmi: plugged
  355. [ 1485.471392] tegradc tegradc.0: blank - powerdown
  356. [ 1485.529845] extcon-disp-state extcon:disp-state: cable 47 state 0
  357. [ 1485.529848] Extcon AUX1(HDMI) disable
  358. [ 1485.550859] tegradc tegradc.0: unblank
  359. [ 1485.567612] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  360. [ 1485.567695] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  361. [ 1485.569144] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  362. [ 1485.569151] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  363. [ 1485.603972] extcon-disp-state extcon:disp-state: cable 47 state 1
  364. [ 1485.603975] Extcon AUX1(HDMI) enable
  365. [ 1485.604158] tegradc tegradc.0: unblank
  366. [ 1485.604433] tegradc tegradc.1: blank - powerdown
  367. [ 1485.677190] tegradc tegradc.0: unblank
  368. [ 1485.677350] tegradc tegradc.1: blank - powerdown
  369. [ 1500.890723] usbcore: deregistering interface driver uvcvideo
  370. [ 1501.023715] uvcvideo: Found UVC 1.00 device H264 USB Camera (05a3:9422)
  371. [ 1501.023720] uvcvideo: Forcing device quirks to 0x80 by module parameter for testing purpose.
  372. [ 1501.023722] uvcvideo: Please report required quirks to the linux-uvc-devel mailing list.
  373. [ 1501.052487] uvcvideo: Unable to create debugfs 1-8 directory.
  374. [ 1501.052676] uvcvideo 1-2.1.1:1.0: Entity type for entity Extension 4 was not initialized!
  375. [ 1501.060989] uvcvideo 1-2.1.1:1.0: Entity type for entity Extension 3 was not initialized!
  376. [ 1501.069227] uvcvideo 1-2.1.1:1.0: Entity type for entity Processing 2 was not initialized!
  377. [ 1501.077523] uvcvideo 1-2.1.1:1.0: Entity type for entity Camera 1 was not initialized!
  378. [ 1501.085742] input: H264 USB Camera as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.1/1-2.1.1:1.0/input/input5
  379. [ 1501.085940] usbcore: registered new interface driver uvcvideo
  380. [ 1501.085942] USB Video Class driver (1.1.1)
  381. [ 1503.107407] usb 1-2.1.1: usb_suspend_both: status 0
  382. [ 1860.211494] FAN rising trip_level:1 cur_temp:51000 trip_temps[2]:61000
  383. [ 1933.935242] usb 1-2.1.1: usb_suspend_both: status 0
  384. [ 2299.009545] usb 1-2.1.1: usb_suspend_both: status 0
  385. [ 2694.026765] usb 1-2.1.1: usb_suspend_both: status 0
  386. [ 2875.986720] usb 1-2.1.1: usb_suspend_both: status 0
  387. [ 3058.996848] usb 1-2.1.1: usb_suspend_both: status 0
  388. [ 3187.904552] usb 1-2.1.1: usb_suspend_both: status 0
  389. [ 4666.991885] usb 1-2.1.1: usb_suspend_both: status 0
  390. [ 4836.520394] wlan0: authenticate with 50:d4:f7:0f:ca:02
  391. [ 4836.547035] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  392. [ 4836.672166] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  393. [ 4836.674852] wlan0: authenticated
  394. [ 4836.680212] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  395. [ 4836.694434] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  396. [ 4836.699927] wlan0: associated
  397. [ 5740.360946] usb 1-2.1.1: USB disconnect, device number 8
  398. [ 7457.797343] wlan0: authenticate with 50:d4:f7:0f:ca:02
  399. [ 7457.828034] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  400. [ 7457.935304] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  401. [ 7457.937677] wlan0: authenticated
  402. [ 7457.939248] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  403. [ 7457.950200] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  404. [ 7457.955867] wlan0: associated
  405. [ 8279.057783] tegradc tegradc.0: blank - powerdown
  406. [ 8279.120259] extcon-disp-state extcon:disp-state: cable 47 state 0
  407. [ 8279.120262] Extcon AUX1(HDMI) disable
  408. [ 8548.602507] FAN cooling trip_level:0 cur_temp:35750 trip_temps[1]:51000
  409. [12192.383289] wlan0: authenticate with 50:d4:f7:0f:ca:02
  410. [12192.408742] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  411. [12192.512141] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  412. [12192.514425] wlan0: authenticated
  413. [12192.516131] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  414. [12192.522607] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  415. [12192.528212] wlan0: associated
  416. [23136.782085] wlan0: authenticate with 50:d4:f7:0f:ca:02
  417. [23136.806718] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  418. [23136.912940] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  419. [23136.919113] wlan0: authenticated
  420. [23136.920902] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  421. [23137.025403] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  422. [23137.129152] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  423. [23137.234142] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  424. [23139.549161] wlan0: authenticate with 50:d4:f7:0f:ca:02
  425. [23139.574480] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  426. [23139.680923] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  427. [23139.792970] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  428. [23139.941304] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  429. [23149.520894] wlan0: authenticate with 50:d4:f7:0f:ca:02
  430. [23149.545821] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  431. [23149.548257] wlan0: authenticated
  432. [23149.548836] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  433. [23149.554845] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  434. [23149.561065] wlan0: associated
  435. [28479.971449] wlan0: authenticate with 50:d4:f7:0f:ca:02
  436. [28480.002407] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  437. [28480.106515] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  438. [28480.210138] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  439. [28480.314016] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  440. [28482.550868] wlan0: authenticate with 50:d4:f7:0f:ca:02
  441. [28482.594316] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  442. [28482.698418] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  443. [28482.825781] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  444. [28482.930295] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  445. [28485.711501] wlan0: authenticate with 50:d4:f7:0f:ca:02
  446. [28485.747215] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  447. [28485.850365] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  448. [28485.960887] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  449. [28486.061891] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  450. [28486.372302] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  451. [28513.342578] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  452. [28518.122363] wlan0: authenticate with 50:d4:f7:0f:ca:02
  453. [28518.144920] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  454. [28518.153217] wlan0: authenticated
  455. [28518.156597] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  456. [28518.165626] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  457. [28518.171454] wlan0: associated
  458. [28518.215183] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  459. [28522.235705] wlan0: disassociated from 50:d4:f7:0f:ca:02 (Reason: 2)
  460. [28523.863508] wlan0: authenticate with 50:d4:f7:0f:ca:02
  461. [28523.904963] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  462. [28523.915464] wlan0: authenticated
  463. [28523.916396] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  464. [28523.939394] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=11)
  465. [28523.945416] wlan0: associated
  466. [42972.689889] hrtimer: interrupt took 5573273 ns
  467. [62981.578005] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  468. [63009.328679] wlan0: authenticate with 50:d4:f7:0f:ca:02
  469. [63009.352303] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  470. [63009.455801] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  471. [63009.458135] wlan0: authenticated
  472. [63009.459825] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  473. [63009.465991] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  474. [63009.471449] wlan0: associated
  475. [63009.517373] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  476. [65289.749109] wlan0: authenticate with 50:d4:f7:0f:ca:02
  477. [65289.793256] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  478. [65289.916929] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  479. [65290.021595] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  480. [65290.125496] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  481. [65292.374422] wlan0: authenticate with 50:d4:f7:0f:ca:02
  482. [65292.401310] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  483. [65292.513036] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  484. [65292.520157] wlan0: authenticated
  485. [65292.521007] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  486. [65292.536385] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  487. [65292.542099] wlan0: associated
  488. [69964.077526] extcon-disp-state extcon:disp-state: cable 40 state 0
  489. [69964.077567] Extcon HDMI: HPD disabled
  490. [69964.077976] tegradc tegradc.0: hdmi: unplugged
  491. [69964.082402] tegradc tegradc.0: blank - powerdown
  492. [69964.082414] tegradc tegradc.0: unblank
  493. [69964.082440] tegradc tegradc.0: unblank
  494. [69964.082449] tegradc tegradc.1: blank - powerdown
  495. [69964.664751] tegradc tegradc.0: blank - powerdown
  496. [69964.664813] tegradc tegradc.0: unblank
  497. [69964.688340] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  498. [69964.688433] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  499. [69964.690025] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  500. [69964.690032] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  501. [69964.725375] extcon-disp-state extcon:disp-state: cable 47 state 1
  502. [69964.725380] Extcon AUX1(HDMI) enable
  503. [69964.725693] extcon-disp-state extcon:disp-state: cable 40 state 1
  504. [69964.725695] Extcon HDMI: HPD enabled
  505. [69964.725751] tegradc tegradc.0: hdmi: plugged
  506. [69964.728515] tegradc tegradc.0: blank - powerdown
  507. [69964.790570] extcon-disp-state extcon:disp-state: cable 47 state 0
  508. [69964.790572] Extcon AUX1(HDMI) disable
  509. [69964.811606] tegradc tegradc.0: unblank
  510. [69964.827334] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  511. [69964.827406] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  512. [69964.829186] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  513. [69964.829196] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  514. [69964.866666] extcon-disp-state extcon:disp-state: cable 47 state 1
  515. [69964.866669] Extcon AUX1(HDMI) enable
  516. [69964.866856] tegradc tegradc.0: unblank
  517. [69964.866864] tegradc tegradc.1: blank - powerdown
  518. [69964.954563] tegradc tegradc.0: unblank
  519. [69964.954573] tegradc tegradc.1: blank - powerdown
  520. [70040.450434] extcon-disp-state extcon:disp-state: cable 47 state 0
  521. [70040.450445] Extcon AUX1(HDMI) disable
  522. [70040.468732] tegradc tegradc.0: blank - powerdown
  523. [70040.468822] extcon-disp-state extcon:disp-state: cable 40 state 0
  524. [70040.468826] Extcon HDMI: HPD disabled
  525. [70040.468866] tegradc tegradc.0: hdmi: unplugged
  526. [70040.478621] tegradc tegradc.0: blank - powerdown
  527. [70040.478634] tegradc tegradc.0: unblank
  528. [70040.478659] tegradc tegradc.0: unblank
  529. [70040.478668] tegradc tegradc.1: blank - powerdown
  530. [70058.644348] tegradc tegradc.0: blank - powerdown
  531. [70058.644494] tegradc tegradc.0: unblank
  532. [70058.675219] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  533. [70058.675312] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  534. [70058.676881] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  535. [70058.676888] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  536. [70058.713332] extcon-disp-state extcon:disp-state: cable 47 state 1
  537. [70058.713337] Extcon AUX1(HDMI) enable
  538. [70058.718328] extcon-disp-state extcon:disp-state: cable 40 state 1
  539. [70058.718333] Extcon HDMI: HPD enabled
  540. [70058.718374] tegradc tegradc.0: hdmi: plugged
  541. [70058.768859] tegradc tegradc.0: blank - powerdown
  542. [70058.827282] extcon-disp-state extcon:disp-state: cable 47 state 0
  543. [70058.827285] Extcon AUX1(HDMI) disable
  544. [70058.848831] tegradc tegradc.0: unblank
  545. [70058.865883] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  546. [70058.865960] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  547. [70058.867394] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  548. [70058.867401] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  549. [70058.903328] extcon-disp-state extcon:disp-state: cable 47 state 1
  550. [70058.903331] Extcon AUX1(HDMI) enable
  551. [70058.903532] tegradc tegradc.0: unblank
  552. [70058.903856] tegradc tegradc.1: blank - powerdown
  553. [70058.961144] tegradc tegradc.0: unblank
  554. [70058.961155] tegradc tegradc.1: blank - powerdown
  555. [73602.814447] tegradc tegradc.0: blank - powerdown
  556. [73602.877108] extcon-disp-state extcon:disp-state: cable 47 state 0
  557. [73602.877112] Extcon AUX1(HDMI) disable
  558. [74161.940035] wlan0: authenticate with 50:d4:f7:0f:ca:02
  559. [74161.968715] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  560. [74162.075092] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  561. [74162.093157] wlan0: authenticated
  562. [74162.095071] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  563. [74162.118400] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  564. [74162.123845] wlan0: associated
  565. [74775.634619] wlan0: authenticate with 50:d4:f7:0f:ca:02
  566. [74775.663846] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  567. [74775.770081] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  568. [74775.772520] wlan0: authenticated
  569. [74775.774863] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  570. [74775.789105] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  571. [74775.798162] wlan0: associated
  572. [75635.726739] wlan0: authenticate with 50:d4:f7:0f:ca:02
  573. [75635.756839] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  574. [75635.812720] wlan0: authenticated
  575. [75635.816391] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  576. [75635.821216] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  577. [75635.827103] wlan0: associated
  578. [75727.939723] wlan0: authenticate with 50:d4:f7:0f:ca:02
  579. [75727.967259] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  580. [75728.073311] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  581. [75728.076210] wlan0: authenticated
  582. [75728.077347] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  583. [75728.082098] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  584. [75728.087766] wlan0: associated
  585. [75881.538066] wlan0: authenticate with 50:d4:f7:0f:ca:02
  586. [75881.569152] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  587. [75881.672202] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  588. [75881.675478] wlan0: authenticated
  589. [75881.676145] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  590. [75881.681248] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  591. [75881.687196] wlan0: associated
  592. [80246.547509] wlan0: authenticate with 50:d4:f7:0f:ca:02
  593. [80246.574513] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  594. [80246.677648] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  595. [80246.685388] wlan0: authenticated
  596. [80246.689639] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  597. [80246.764512] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  598. [80246.771237] wlan0: associated
  599. [80452.390608] usb 1-2.1.1: new high-speed USB device number 10 using tegra-xusb
  600. [80452.413098] usb 1-2.1.1: New USB device found, idVendor=8087, idProduct=0716
  601. [80452.413166] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  602. [80453.961718] usb 1-2.1.1: USB disconnect, device number 10
  603. [80461.111922] extcon-disp-state extcon:disp-state: cable 40 state 0
  604. [80461.111966] Extcon HDMI: HPD disabled
  605. [80461.112300] tegradc tegradc.0: hdmi: unplugged
  606. [80461.145543] tegradc tegradc.0: blank - powerdown
  607. [80461.145557] tegradc tegradc.0: unblank
  608. [80461.145583] tegradc tegradc.0: unblank
  609. [80461.145593] tegradc tegradc.1: blank - powerdown
  610. [80461.697757] tegradc tegradc.0: blank - powerdown
  611. [80461.697822] tegradc tegradc.0: unblank
  612. [80461.734271] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  613. [80461.734408] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  614. [80461.735929] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  615. [80461.735937] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  616. [80461.773766] extcon-disp-state extcon:disp-state: cable 47 state 1
  617. [80461.773771] Extcon AUX1(HDMI) enable
  618. [80461.774150] extcon-disp-state extcon:disp-state: cable 40 state 1
  619. [80461.774152] Extcon HDMI: HPD enabled
  620. [80461.774184] tegradc tegradc.0: hdmi: plugged
  621. [80461.808311] tegradc tegradc.0: blank - powerdown
  622. [80461.869672] extcon-disp-state extcon:disp-state: cable 47 state 0
  623. [80461.869674] Extcon AUX1(HDMI) disable
  624. [80461.890955] tegradc tegradc.0: unblank
  625. [80461.906636] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  626. [80461.906713] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  627. [80461.908102] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  628. [80461.908110] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  629. [80461.946455] extcon-disp-state extcon:disp-state: cable 47 state 1
  630. [80461.946457] Extcon AUX1(HDMI) enable
  631. [80461.946599] tegradc tegradc.0: unblank
  632. [80461.946953] tegradc tegradc.1: blank - powerdown
  633. [80462.003167] tegradc tegradc.0: unblank
  634. [80462.003178] tegradc tegradc.1: blank - powerdown
  635. [80470.054878] usb 1-2.1.1: new high-speed USB device number 11 using tegra-xusb
  636. [80470.077532] usb 1-2.1.1: New USB device found, idVendor=8087, idProduct=0716
  637. [80470.077599] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  638. [80473.415847] usb 1-2.1.1: USB disconnect, device number 11
  639. [80476.198794] usb 1-2.1.1: new high-speed USB device number 12 using tegra-xusb
  640. [80476.239623] usb 1-2.1.1: New USB device found, idVendor=1bc7, idProduct=0036
  641. [80476.239667] usb 1-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  642. [80476.239699] usb 1-2.1.1: Product: FIH7160
  643. [80476.239731] usb 1-2.1.1: Manufacturer: Telit
  644. [80476.239763] usb 1-2.1.1: SerialNumber: 356052100099549
  645. [80476.325409] cdc_ncm 1-2.1.1:1.12: MAC-Address: 00:00:11:12:13:14
  646. [80476.325421] cdc_ncm 1-2.1.1:1.12: setting rx_max = 16384
  647. [80476.326861] cdc_ncm 1-2.1.1:1.12 wwan0: register 'cdc_ncm' at usb-70090000.xusb-2.1.1, Mobile Broadband Network Device (NO ARP), 00:00:11:12:13:14
  648. [80476.409459] cdc_acm 1-2.1.1:1.0: ttyACM0: USB ACM device
  649. [80476.413678] cdc_acm 1-2.1.1:1.2: ttyACM1: USB ACM device
  650. [80476.415683] cdc_acm 1-2.1.1:1.4: ttyACM2: USB ACM device
  651. [80476.417150] cdc_acm 1-2.1.1:1.6: ttyACM3: USB ACM device
  652. [80476.418734] cdc_acm 1-2.1.1:1.8: ttyACM4: USB ACM device
  653. [80476.421320] cdc_acm 1-2.1.1:1.10: ttyACM5: USB ACM device
  654. [80476.466909] usbcore: registered new interface driver cdc_acm
  655. [80476.466913] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  656. [80488.267066] usb 1-2.4: USB disconnect, device number 5
  657. [80488.272227] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
  658. [80488.272280] option 1-2.4:1.0: device disconnected
  659. [80488.273174] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
  660. [80488.273218] option 1-2.4:1.1: device disconnected
  661. [80488.280657] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
  662. [80488.280743] option 1-2.4:1.2: device disconnected
  663. [80488.280948] option 1-2.4:1.3: device disconnected
  664. [80584.931427] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x7010 with error -71
  665. [80585.033237] usb 1-2.3: USB disconnect, device number 3
  666. [80585.036198] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x7010 with error -19
  667. [80585.075211] wlan0: deauthenticating from 50:d4:f7:0f:ca:02 by local choice (Reason: 3=DEAUTH_LEAVING)
  668. [80704.807872] usb 1-2.3: new high-speed USB device number 13 using tegra-xusb
  669. [80704.851650] usb 1-2.3: New USB device found, idVendor=148f, idProduct=5370
  670. [80704.851711] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  671. [80704.851757] usb 1-2.3: Product: 802.11 n WLAN
  672. [80704.851799] usb 1-2.3: Manufacturer: Ralink
  673. [80704.851916] usb 1-2.3: SerialNumber: 1.0
  674. [80704.940867] usb 1-2.3: reset high-speed USB device number 13 using tegra-xusb
  675. [80704.976930] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  676. [80705.064154] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 5370 detected
  677. [80705.070423] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  678. [80705.192313] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  679. [80705.192473] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  680. [80705.197793] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
  681. [80705.439185] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  682. [80705.504495] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  683. [80710.904190] wlan0: authenticate with 50:d4:f7:0f:ca:02
  684. [80710.930270] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  685. [80711.035269] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  686. [80711.049671] wlan0: authenticated
  687. [80711.051198] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  688. [80711.064349] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  689. [80711.069783] wlan0: associated
  690. [80711.095318] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  691. [84352.779767] tegradc tegradc.0: blank - powerdown
  692. [84352.841651] extcon-disp-state extcon:disp-state: cable 47 state 0
  693. [84352.841653] Extcon AUX1(HDMI) disable
  694. [84419.949616] usb 2-1.1: USB disconnect, device number 3
  695. [84420.007890] usb 2-1: usb_suspend_both: status 0
  696. [84420.008138] usb usb2: usb_suspend_both: status 0
  697. [84420.167984] usb 1-2.1: USB disconnect, device number 7
  698. [84420.168160] usb 1-2.1.1: USB disconnect, device number 12
  699. [84420.168593] cdc_acm 1-2.1.1:1.6: acm_ctrl_irq - usb_submit_urb failed: -19
  700. [84420.178405] cdc_acm 1-2.1.1:1.6: failed to set dtr/rts
  701. [84420.191242] cdc_ncm 1-2.1.1:1.12 wwan0: unregister 'cdc_ncm' usb-70090000.xusb-2.1.1, Mobile Broadband Network Device (NO ARP)
  702. [84420.225787] usb 1-2.1.4: USB disconnect, device number 9
  703. [84949.166386] usb 2-1.1: new SuperSpeed USB device number 4 using tegra-xusb
  704. [84949.200918] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0411
  705. [84949.201073] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  706. [84949.201093] usb 2-1.1: Product: 4-Port USB 3.0 Hub
  707. [84949.201111] usb 2-1.1: Manufacturer: Generic
  708. [84949.209280] hub 2-1.1:1.0: USB hub found
  709. [84949.211036] hub 2-1.1:1.0: 4 ports detected
  710. [84949.289149] usb 1-2.1: new high-speed USB device number 14 using tegra-xusb
  711. [84949.326858] usb 1-2.1: New USB device found, idVendor=0bda, idProduct=5411
  712. [84949.326883] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  713. [84949.326901] usb 1-2.1: Product: 4-Port USB 2.0 Hub
  714. [84949.326918] usb 1-2.1: Manufacturer: Generic
  715. [84949.331252] hub 1-2.1:1.0: USB hub found
  716. [84949.332405] hub 1-2.1:1.0: 4 ports detected
  717. [84949.352946] usb 2-1.1: usb_suspend_both: status 0
  718. [84949.404935] usb 2-1: usb_suspend_both: status 0
  719. [84949.405099] usb usb2: usb_suspend_both: status 0
  720. [84949.621211] usb 1-2.1.4: new full-speed USB device number 15 using tegra-xusb
  721. [84949.649215] usb 1-2.1.4: New USB device found, idVendor=046d, idProduct=c52b
  722. [84949.649241] usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  723. [84949.649258] usb 1-2.1.4: Product: USB Receiver
  724. [84949.649275] usb 1-2.1.4: Manufacturer: Logitech
  725. [84949.667146] logitech-djreceiver 0003:046D:C52B.000B: hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.1.4/input2
  726. [84949.795382] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.2/0003:046D:C52B.000B/0003:046D:404D.000C/input/input6
  727. [84949.796156] logitech-hidpp-device 0003:046D:404D.000C: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.1.4:1
  728. [84950.825681] usb 1-2.1.1: new high-speed USB device number 16 using tegra-xusb
  729. [84950.849603] usb 1-2.1.1: New USB device found, idVendor=8087, idProduct=0716
  730. [84950.849668] usb 1-2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  731. [84954.187594] usb 1-2.1.1: USB disconnect, device number 16
  732. [84956.968473] usb 1-2.1.1: new high-speed USB device number 17 using tegra-xusb
  733. [84957.003021] usb 1-2.1.1: New USB device found, idVendor=1bc7, idProduct=0036
  734. [84957.003045] usb 1-2.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  735. [84957.003063] usb 1-2.1.1: Product: FIH7160
  736. [84957.003080] usb 1-2.1.1: Manufacturer: Telit
  737. [84957.003096] usb 1-2.1.1: SerialNumber: 356052100099549
  738. [84957.049559] cdc_acm 1-2.1.1:1.0: ttyACM0: USB ACM device
  739. [84957.056694] cdc_acm 1-2.1.1:1.2: ttyACM1: USB ACM device
  740. [84957.060183] cdc_acm 1-2.1.1:1.4: ttyACM2: USB ACM device
  741. [84957.065422] cdc_acm 1-2.1.1:1.6: ttyACM3: USB ACM device
  742. [84957.068666] cdc_acm 1-2.1.1:1.8: ttyACM4: USB ACM device
  743. [84957.072105] cdc_acm 1-2.1.1:1.10: ttyACM5: USB ACM device
  744. [84957.112094] cdc_ncm 1-2.1.1:1.12: MAC-Address: 00:00:11:12:13:14
  745. [84957.112116] cdc_ncm 1-2.1.1:1.12: setting rx_max = 16384
  746. [84957.118846] cdc_ncm 1-2.1.1:1.12 wwan0: register 'cdc_ncm' at usb-70090000.xusb-2.1.1, Mobile Broadband Network Device (NO ARP), 00:00:11:12:13:14
  747. [84965.669040] extcon-disp-state extcon:disp-state: cable 40 state 0
  748. [84965.669083] Extcon HDMI: HPD disabled
  749. [84965.669400] tegradc tegradc.0: hdmi: unplugged
  750. [84965.675974] tegradc tegradc.0: blank - powerdown
  751. [84965.675986] tegradc tegradc.0: unblank
  752. [84965.676015] tegradc tegradc.0: unblank
  753. [84965.676023] tegradc tegradc.1: blank - powerdown
  754. [84966.505652] tegradc tegradc.0: blank - powerdown
  755. [84966.505721] tegradc tegradc.0: unblank
  756. [84966.531870] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  757. [84966.531960] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  758. [84966.533731] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  759. [84966.533739] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  760. [84966.570338] extcon-disp-state extcon:disp-state: cable 47 state 1
  761. [84966.570343] Extcon AUX1(HDMI) enable
  762. [84966.570670] extcon-disp-state extcon:disp-state: cable 40 state 1
  763. [84966.570677] Extcon HDMI: HPD enabled
  764. [84966.570741] tegradc tegradc.0: hdmi: plugged
  765. [84966.605757] tegradc tegradc.0: blank - powerdown
  766. [84966.668259] extcon-disp-state extcon:disp-state: cable 47 state 0
  767. [84966.668269] Extcon AUX1(HDMI) disable
  768. [84966.688344] tegradc tegradc.0: unblank
  769. [84966.704036] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  770. [84966.704112] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  771. [84966.705531] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  772. [84966.705539] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  773. [84966.743703] extcon-disp-state extcon:disp-state: cable 47 state 1
  774. [84966.743706] Extcon AUX1(HDMI) enable
  775. [84966.743885] tegradc tegradc.0: unblank
  776. [84966.743892] tegradc tegradc.1: blank - powerdown
  777. [84966.836983] tegradc tegradc.0: unblank
  778. [84966.837144] tegradc tegradc.1: blank - powerdown
  779. [86114.097957] usb 2-1.1: USB disconnect, device number 4
  780. [86114.119695] usb 1-2.1: USB disconnect, device number 14
  781. [86114.119702] usb 1-2.1.1: USB disconnect, device number 17
  782. [86114.124760] cdc_ncm 1-2.1.1:1.12 wwan0: unregister 'cdc_ncm' usb-70090000.xusb-2.1.1, Mobile Broadband Network Device (NO ARP)
  783. [86114.156042] usb 2-1: usb_suspend_both: status 0
  784. [86114.156375] usb usb2: usb_suspend_both: status 0
  785. [86114.165510] usb 1-2.1.4: USB disconnect, device number 15
  786. [88330.980359] wlan0: authenticate with 50:d4:f7:0f:ca:02
  787. [88331.016059] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  788. [88331.139701] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  789. [88331.159660] wlan0: authenticated
  790. [88331.163671] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  791. [88331.268517] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  792. [88331.372008] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  793. [88331.384332] wlan0: associated
  794. [88763.634724] tegradc tegradc.0: blank - powerdown
  795. [88763.696337] extcon-disp-state extcon:disp-state: cable 47 state 0
  796. [88763.696340] Extcon AUX1(HDMI) disable
  797. [89434.812026] wlan0: authenticate with 50:d4:f7:0f:ca:02
  798. [89434.845202] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  799. [89434.948368] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  800. [89434.955148] wlan0: authenticated
  801. [89434.956369] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  802. [89434.970663] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  803. [89434.975736] wlan0: associated
  804. [89551.517822] wlan0: authenticate with 50:d4:f7:0f:ca:02
  805. [89551.556927] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  806. [89551.675406] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  807. [89551.779749] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  808. [89551.903641] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  809. [89554.160643] wlan0: authenticate with 50:d4:f7:0f:ca:02
  810. [89554.207900] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  811. [89554.211037] wlan0: authenticated
  812. [89554.215441] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  813. [89554.225856] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  814. [89554.231073] wlan0: associated
  815. [89987.764852] wlan0: authenticate with 50:d4:f7:0f:ca:02
  816. [89987.789174] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  817. [89987.895815] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  818. [89987.899852] wlan0: authenticated
  819. [89987.903785] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  820. [89987.912506] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  821. [89987.917687] wlan0: associated
  822. [90471.479345] extcon-disp-state extcon:disp-state: cable 40 state 0
  823. [90471.479389] Extcon HDMI: HPD disabled
  824. [90471.479731] tegradc tegradc.0: hdmi: unplugged
  825. [90471.492022] tegradc tegradc.0: blank - powerdown
  826. [90471.492034] tegradc tegradc.0: unblank
  827. [90471.492060] tegradc tegradc.0: unblank
  828. [90471.492069] tegradc tegradc.1: blank - powerdown
  829. [90472.058489] tegradc tegradc.0: blank - powerdown
  830. [90472.058567] tegradc tegradc.0: unblank
  831. [90472.081983] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  832. [90472.082085] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  833. [90472.083649] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  834. [90472.083656] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  835. [90472.119187] extcon-disp-state extcon:disp-state: cable 47 state 1
  836. [90472.119191] Extcon AUX1(HDMI) enable
  837. [90472.119448] extcon-disp-state extcon:disp-state: cable 40 state 1
  838. [90472.119451] Extcon HDMI: HPD enabled
  839. [90472.119474] tegradc tegradc.0: hdmi: plugged
  840. [90472.125614] tegradc tegradc.0: blank - powerdown
  841. [90472.184217] extcon-disp-state extcon:disp-state: cable 47 state 0
  842. [90472.184219] Extcon AUX1(HDMI) disable
  843. [90472.205135] tegradc tegradc.0: unblank
  844. [90472.220948] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  845. [90472.221021] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  846. [90472.222556] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  847. [90472.222564] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  848. [90472.261373] extcon-disp-state extcon:disp-state: cable 47 state 1
  849. [90472.261377] Extcon AUX1(HDMI) enable
  850. [90472.261900] tegradc tegradc.0: unblank
  851. [90472.262062] tegradc tegradc.1: blank - powerdown
  852. [90472.316728] tegradc tegradc.0: unblank
  853. [90472.316738] tegradc tegradc.1: blank - powerdown
  854. [90478.920125] usb 1-2.3: USB disconnect, device number 13
  855. [90478.961899] wlan0: deauthenticating from 50:d4:f7:0f:ca:02 by local choice (Reason: 3=DEAUTH_LEAVING)
  856. [90479.205872] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1
  857. [90479.225942] usb 1-2: usb_suspend_both: status 0
  858. [90479.226056] usb usb1: usb_suspend_both: status 0
  859. [90479.226066] tegra-xusb 70090000.xusb: entering ELPG
  860. [90479.227383] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3
  861. [90479.227695] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0
  862. [90479.229612] tegra-xusb 70090000.xusb: entering ELPG done
  863. [90498.976810] tegra-xusb 70090000.xusb: exiting ELPG
  864. [90498.979100] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
  865. [90498.983599] tegra-xusb 70090000.xusb: Firmware timestamp: 2019-05-08 09:42:10 UTC, Version: 50.22 release
  866. [90498.984121] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0
  867. [90498.984312] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1
  868. [90498.984497] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2
  869. [90498.985499] tegra-xusb 70090000.xusb: exiting ELPG done
  870. [90499.290331] usb 1-2.1: new full-speed USB device number 18 using tegra-xusb
  871. [90499.322123] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c52b
  872. [90499.322186] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  873. [90499.322232] usb 1-2.1: Product: USB Receiver
  874. [90499.322275] usb 1-2.1: Manufacturer: Logitech
  875. [90499.348777] logitech-djreceiver 0003:046D:C52B.000F: hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-70090000.xusb-2.1/input2
  876. [90499.480233] input: Logitech K400 Plus as /devices/70090000.xusb/usb1/1-2/1-2.1/1-2.1:1.2/0003:046D:C52B.000F/0003:046D:404D.0010/input/input7
  877. [90499.481099] logitech-hidpp-device 0003:046D:404D.0010: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-70090000.xusb-2.1:1
  878. [90514.058227] usb 1-2.3: new high-speed USB device number 19 using tegra-xusb
  879. [90514.106063] usb 1-2.3: New USB device found, idVendor=148f, idProduct=5370
  880. [90514.106127] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  881. [90514.106176] usb 1-2.3: Product: 802.11 n WLAN
  882. [90514.106218] usb 1-2.3: Manufacturer: Ralink
  883. [90514.106261] usb 1-2.3: SerialNumber: 1.0
  884. [90514.199066] usb 1-2.3: reset high-speed USB device number 19 using tegra-xusb
  885. [90514.234886] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
  886. [90514.327965] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected
  887. [90514.331487] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
  888. [90514.430998] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  889. [90514.431157] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
  890. [90514.431213] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
  891. [90514.732613] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  892. [90514.794366] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  893. [90519.638359] wlan0: authenticate with 50:d4:f7:0f:ca:02
  894. [90519.666193] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  895. [90519.674592] wlan0: authenticated
  896. [90519.677520] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  897. [90519.683472] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  898. [90519.688807] wlan0: associated
  899. [90519.713531] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  900. [92134.161955] wlan0: authenticate with 50:d4:f7:0f:ca:02
  901. [92134.185531] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  902. [92134.353271] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  903. [92134.417015] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  904. [92134.461026] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  905. [92143.587703] wlan0: authenticate with 50:d4:f7:0f:ca:02
  906. [92143.633752] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  907. [92143.690173] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  908. [92143.744644] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  909. [92143.776491] wlan0: authenticated
  910. [92143.776981] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  911. [92143.814383] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  912. [92143.819444] wlan0: associated
  913. [92179.359300] wlan0: deauthenticated from 50:d4:f7:0f:ca:02 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
  914. [92181.808335] wlan0: authenticate with 50:d4:f7:0f:ca:02
  915. [92181.848114] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  916. [92181.952614] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  917. [92182.060682] wlan0: authenticated
  918. [92182.064046] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  919. [92182.070294] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  920. [92182.075563] wlan0: associated
  921. [92216.074159] wlan0: deauthenticated from 50:d4:f7:0f:ca:02 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
  922. [92225.271931] wlan0: authenticate with 50:d4:f7:0f:ca:02
  923. [92225.303408] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  924. [92225.305883] wlan0: authenticated
  925. [92225.314953] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  926. [92225.326471] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  927. [92225.331751] wlan0: associated
  928. [92368.213483] wlan0: authenticate with 50:d4:f7:0f:ca:02
  929. [92368.243921] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  930. [92368.359552] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  931. [92368.363579] wlan0: authenticated
  932. [92368.370738] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  933. [92368.375540] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  934. [92368.380780] wlan0: associated
  935. [94111.831230] tegradc tegradc.0: blank - powerdown
  936. [94111.891958] extcon-disp-state extcon:disp-state: cable 47 state 0
  937. [94111.891961] Extcon AUX1(HDMI) disable
  938. [94398.168802] wlan0: authenticate with 50:d4:f7:0f:ca:02
  939. [94398.195218] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  940. [94398.299735] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  941. [94398.427013] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  942. [94398.535458] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  943. [94400.757488] wlan0: authenticate with 50:d4:f7:0f:ca:02
  944. [94400.791514] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  945. [94400.805406] wlan0: authenticated
  946. [94400.807096] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  947. [94400.911955] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  948. [94401.042965] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  949. [94401.151324] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  950. [94403.968543] wlan0: authenticate with 50:d4:f7:0f:ca:02
  951. [94404.002904] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  952. [94404.107150] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  953. [94404.226876] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  954. [94404.391537] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  955. [94404.718191] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  956. [94420.639181] wlan0: authenticate with 50:d4:f7:0f:ca:02
  957. [94420.670961] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  958. [94420.774739] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  959. [94420.942427] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  960. [94421.047343] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  961. [94431.676011] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  962. [94433.944447] wlan0: authenticate with 50:d4:f7:0f:ca:02
  963. [94433.976777] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  964. [94434.082152] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  965. [94434.172914] wlan0: authenticated
  966. [94434.174158] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  967. [94434.233595] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  968. [94434.239206] wlan0: associated
  969. [94434.405322] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  970. [94709.195676] wlan0: authenticate with 50:d4:f7:0f:ca:02
  971. [94709.220301] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  972. [94709.335717] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  973. [94709.343224] wlan0: authenticated
  974. [94709.347664] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  975. [94709.361482] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  976. [94709.366623] wlan0: associated
  977. [95753.718648] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  978. [95753.989913] wlan0: authenticate with 50:d4:f7:0f:ca:02
  979. [95754.021000] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  980. [95754.124666] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  981. [95754.240562] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  982. [95754.346014] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  983. [95756.283693] wlan0: authenticate with 50:d4:f7:0f:ca:02
  984. [95756.316801] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  985. [95756.325468] wlan0: authenticated
  986. [95756.328845] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  987. [95756.351607] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  988. [95756.356892] wlan0: associated
  989. [95756.382248] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  990. [95822.708617] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  991. [95883.435113] wlan0: authenticate with 50:d4:f7:0f:ca:02
  992. [95883.458904] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  993. [95883.562920] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  994. [95883.666679] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  995. [95883.802224] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  996. [95898.643544] wlan0: authenticate with 50:d4:f7:0f:ca:02
  997. [95898.674534] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  998. [95898.786344] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  999. [95898.793950] wlan0: authenticated
  1000. [95898.798365] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1001. [95898.805147] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1002. [95898.810343] wlan0: associated
  1003. [95898.851210] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1004. [95903.213161] wlan0: deauthenticated from 50:d4:f7:0f:ca:02 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
  1005. [95903.323703] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1006. [95903.347029] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1007. [95903.350434] wlan0: authenticated
  1008. [95903.354417] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1009. [95903.367926] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1010. [95903.375367] wlan0: associated
  1011. [96352.195619] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1012. [96352.224383] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1013. [96352.328280] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1014. [96352.432053] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1015. [96352.536039] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1016. [96358.714050] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1017. [96360.354949] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1018. [96360.379643] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1019. [96360.559207] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1020. [96360.655336] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1021. [96360.678459] wlan0: authenticated
  1022. [96360.683335] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1023. [96360.772046] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1024. [96360.782980] wlan0: associated
  1025. [96362.827331] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1026. [96367.253216] wlan0: deauthenticated from 50:d4:f7:0f:ca:02 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
  1027. [96367.406258] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1028. [96367.441025] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1029. [96367.544479] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1030. [96367.735464] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1031. [96367.839221] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1032. [96369.813944] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1033. [96369.843789] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1034. [96369.948166] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1035. [96370.095269] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1036. [96370.215376] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1037. [96372.734416] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1038. [96372.759718] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1039. [96372.863600] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1040. [96372.995262] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1041. [96373.099508] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1042. [96384.987538] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1043. [96385.019539] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1044. [96385.032261] wlan0: authenticated
  1045. [96385.035136] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1046. [96385.139935] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1047. [96385.243261] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1048. [96385.403196] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  1049. [96406.434775] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1050. [96406.463729] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1051. [96406.567212] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1052. [96406.679108] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1053. [96406.783264] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1054. [96407.723818] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1055. [96409.266584] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1056. [96409.287586] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1057. [96409.392006] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1058. [96409.452691] wlan0: authenticated
  1059. [96409.455236] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1060. [96409.559610] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1061. [96409.663089] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1062. [96409.787332] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  1063. [96459.688809] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1064. [96520.510648] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1065. [96520.534841] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1066. [96520.633064] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1067. [96520.693373] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1068. [96520.794894] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1069. [96538.712548] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1070. [96538.746554] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1071. [96538.832000] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1072. [96538.935019] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1073. [96539.086632] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1074. [96545.680746] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1075. [96860.103899] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1076. [96860.136598] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1077. [96860.240479] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1078. [96860.368099] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1079. [96860.508110] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1080. [96870.688763] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1081. [96879.876455] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1082. [96879.908340] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1083. [96879.995886] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1084. [96880.100199] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1085. [96880.231923] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1086. [96897.678162] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1087. [96958.432043] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1088. [96958.455543] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1089. [96958.560212] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1090. [96958.663146] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1091. [96958.767192] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1092. [96983.684361] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1093. [97067.511085] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1094. [97067.534384] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1095. [97067.542404] wlan0: authenticated
  1096. [97067.546165] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1097. [97067.561818] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1098. [97067.567753] wlan0: associated
  1099. [97067.620028] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1100. [97092.475630] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1101. [97092.506148] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1102. [97092.610758] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1103. [97092.710771] wlan0: authenticated
  1104. [97092.714047] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1105. [97092.818409] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1106. [97092.928735] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1107. [97092.939245] wlan0: associated
  1108. [97133.440218] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1109. [97133.469933] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1110. [97133.574492] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1111. [97133.749526] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1112. [97133.853519] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1113. [97136.128761] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1114. [97136.157933] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1115. [97136.261530] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1116. [97136.267146] wlan0: authenticated
  1117. [97136.269472] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1118. [97136.373548] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1119. [97136.435584] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1120. [97136.441221] wlan0: associated
  1121. [97161.705849] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1122. [97161.960702] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1123. [97161.989439] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1124. [97162.097292] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1125. [97162.107294] wlan0: authenticated
  1126. [97162.109221] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1127. [97162.118919] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1128. [97162.124009] wlan0: associated
  1129. [97162.181490] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1130. [97539.157108] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1131. [97539.190426] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1132. [97539.310381] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1133. [97539.313114] wlan0: authenticated
  1134. [97539.314333] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1135. [97539.325189] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1136. [97539.330337] wlan0: associated
  1137. [97765.418059] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1138. [97765.456648] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1139. [97765.561154] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1140. [97765.665391] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1141. [97765.796546] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1142. [97774.690448] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1143. [97774.728958] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1144. [97774.772032] wlan0: authenticated
  1145. [97774.775534] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1146. [97774.835659] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1147. [97774.841167] wlan0: associated
  1148. [98246.323113] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1149. [98246.357820] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1150. [98246.460565] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1151. [98246.465356] wlan0: authenticated
  1152. [98246.468863] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1153. [98246.483057] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1154. [98246.490637] wlan0: associated
  1155. [98439.974007] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1156. [98440.007384] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1157. [98440.115117] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1158. [98440.133673] wlan0: authenticated
  1159. [98440.135067] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1160. [98440.151369] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1161. [98440.156574] wlan0: associated
  1162. [99526.520114] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1163. [99725.290417] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1164. [99725.314429] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1165. [99725.417733] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1166. [99725.432142] wlan0: authenticated
  1167. [99725.433723] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1168. [99725.541750] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1169. [99725.550453] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1170. [99725.556104] wlan0: associated
  1171. [99725.579630] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1172. [99955.190820] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1173. [99955.231616] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1174. [99955.338044] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1175. [99955.347964] wlan0: authenticated
  1176. [99955.350139] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1177. [99955.454752] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1178. [99955.459634] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1179. [99955.464834] wlan0: associated
  1180. [100749.675388] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1181. [100749.705005] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1182. [100749.752268] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1183. [100749.794825] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1184. [100749.817639] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1185. [100758.759303] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1186. [100758.782555] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1187. [100758.886108] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1188. [100758.990027] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1189. [100759.019309] wlan0: authenticated
  1190. [100759.022104] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1191. [100759.126785] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1192. [100759.230850] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1193. [100759.335031] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  1194. [100763.477856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1195. [100765.114715] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1196. [100765.138019] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1197. [100765.144291] wlan0: authenticated
  1198. [100765.145771] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1199. [100765.255813] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1200. [100765.261088] wlan0: associated
  1201. [100765.307775] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1202. [101063.560136] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1203. [101063.598813] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1204. [101063.705022] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1205. [101063.731182] wlan0: authenticated
  1206. [101063.732989] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1207. [101063.739555] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1208. [101063.744646] wlan0: associated
  1209. [101184.188668] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1210. [101184.232015] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1211. [101184.339844] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1212. [101184.455797] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1213. [101184.560024] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1214. [101186.809309] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1215. [101186.844111] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1216. [101186.967648] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1217. [101187.079686] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1218. [101187.133036] wlan0: authenticated
  1219. [101187.135691] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1220. [101187.171114] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1221. [101187.182582] wlan0: associated
  1222. [101269.846800] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1223. [101269.884200] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1224. [101269.988139] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1225. [101270.092505] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1226. [101270.232157] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1227. [101276.435098] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1228. [101379.132577] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1229. [101379.160060] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1230. [101379.194148] wlan0: authenticated
  1231. [101379.195307] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1232. [101379.220768] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1233. [101379.226013] wlan0: associated
  1234. [101379.259301] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1235. [101482.856478] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1236. [101482.887164] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1237. [101482.991739] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1238. [101483.095048] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1239. [101483.226774] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1240. [101485.430600] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1241. [101485.474733] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1242. [101485.578731] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1243. [101485.643490] wlan0: authenticated
  1244. [101485.646641] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1245. [101485.663457] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1246. [101485.668842] wlan0: associated
  1247. [101489.764933] wlan0: disassociated from 50:d4:f7:0f:ca:02 (Reason: 2)
  1248. [101491.707069] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1249. [101491.730728] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1250. [101491.835410] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1251. [101491.958438] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1252. [101492.074565] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1253. [101494.244382] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1254. [101494.282405] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1255. [101494.386987] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1256. [101494.402437] wlan0: authenticated
  1257. [101494.406272] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1258. [101494.510309] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1259. [101494.614422] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1260. [101494.691734] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1261. [101494.704257] wlan0: associated
  1262. [101513.128186] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1263. [101513.165588] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1264. [101513.176025] wlan0: authenticated
  1265. [101513.177504] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1266. [101513.186524] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1267. [101513.191999] wlan0: associated
  1268. [101845.411196] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1269. [101845.440414] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1270. [101845.480035] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1271. [101845.480703] wlan0: aborting authentication with 50:d4:f7:0f:ca:02 by local choice (Reason: 3=DEAUTH_LEAVING)
  1272. [101845.779961] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1273. [101845.811287] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1274. [101845.819076] wlan0: authenticated
  1275. [101845.822938] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1276. [101845.927053] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1277. [101846.030913] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1278. [101846.135510] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  1279. [101848.088276] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1280. [101848.122857] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1281. [101848.125388] wlan0: authenticated
  1282. [101848.126780] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1283. [101848.145536] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1284. [101848.151256] wlan0: associated
  1285. [101848.219822] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1286. [102342.740765] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1287. [102342.770107] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1288. [102342.877085] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1289. [102342.886406] wlan0: authenticated
  1290. [102342.889113] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1291. [102342.895889] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1292. [102342.901111] wlan0: associated
  1293. [102803.820549] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1294. [102803.846526] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1295. [102803.952718] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1296. [102803.961557] wlan0: authenticated
  1297. [102803.964782] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1298. [102803.973869] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1299. [102803.979056] wlan0: associated
  1300. [102887.777951] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1301. [102887.809143] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1302. [102887.913041] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1303. [102887.915660] wlan0: authenticated
  1304. [102887.917007] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1305. [102887.939620] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1306. [102887.945098] wlan0: associated
  1307. [103095.143346] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1308. [103095.180231] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1309. [103095.339866] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1310. [103095.352678] wlan0: authenticated
  1311. [103095.355919] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1312. [103095.442479] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1313. [103095.448406] wlan0: associated
  1314. [103702.749403] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1315. [103702.784741] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1316. [103702.896340] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1317. [103702.907096] wlan0: authenticated
  1318. [103702.908289] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1319. [103702.913256] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1320. [103702.920911] wlan0: associated
  1321. [104055.043200] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1322. [104055.064829] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1323. [104055.168473] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1324. [104055.177631] wlan0: authenticated
  1325. [104055.180536] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1326. [104055.196668] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1327. [104055.202119] wlan0: associated
  1328. [104232.043237] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1329. [104232.069421] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1330. [104232.141840] wlan0: authenticated
  1331. [104232.144869] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1332. [104232.248993] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1333. [104232.278092] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1334. [104232.283597] wlan0: associated
  1335. [104296.668236] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1336. [104296.715444] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1337. [104296.820324] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1338. [104296.831591] wlan0: authenticated
  1339. [104296.835327] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1340. [104296.850025] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1341. [104296.855028] wlan0: associated
  1342. [104445.687908] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1343. [104445.727681] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1344. [104445.847586] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1345. [104445.862134] wlan0: authenticated
  1346. [104445.863552] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1347. [104445.877650] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1348. [104445.883058] wlan0: associated
  1349. [105059.317450] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1350. [105059.665509] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1351. [105059.689576] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1352. [105059.793296] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1353. [105059.799441] wlan0: authenticated
  1354. [105059.801285] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1355. [105059.905327] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1356. [105060.007103] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1357. [105060.016960] wlan0: associated
  1358. [105060.061614] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1359. [105129.051076] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1360. [105129.079527] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1361. [105129.211044] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1362. [105129.315479] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1363. [105129.407521] wlan0: authenticated
  1364. [105129.411091] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1365. [105129.424341] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1366. [105129.430633] wlan0: associated
  1367. [105172.686231] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1368. [105172.715686] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1369. [105172.751917] wlan0: authenticated
  1370. [105172.753626] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1371. [105172.765194] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=10)
  1372. [105172.770367] wlan0: associated
  1373. [105745.998833] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1374. [105746.033828] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1375. [105746.137231] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1376. [105746.153505] wlan0: authenticated
  1377. [105746.157315] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1378. [105746.171862] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1379. [105746.177123] wlan0: associated
  1380. [105815.805810] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1381. [105815.844583] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1382. [105815.955920] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1383. [105816.057252] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1384. [105816.172415] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1385. [105822.309862] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1386. [105824.001736] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1387. [105824.028457] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1388. [105824.131856] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1389. [105824.236562] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1390. [105824.419911] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1391. [105826.908135] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1392. [105826.945476] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1393. [105827.051647] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1394. [105827.073756] wlan0: authenticated
  1395. [105827.079673] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1396. [105827.191724] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1397. [105827.201548] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1398. [105827.206740] wlan0: associated
  1399. [105828.139899] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1400. [106257.021967] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1401. [106257.050190] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1402. [106257.161345] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1403. [106257.173434] wlan0: authenticated
  1404. [106257.177278] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1405. [106257.191050] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1406. [106257.196633] wlan0: associated
  1407. [107425.953772] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1408. [107425.980945] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1409. [107426.098867] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1410. [107426.105772] wlan0: authenticated
  1411. [107426.107074] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1412. [107426.211929] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1413. [107426.274010] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1414. [107426.283080] wlan0: associated
  1415. [108417.065407] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1416. [108417.091192] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1417. [108417.194465] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1418. [108417.299356] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1419. [108417.462416] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1420. [108426.404274] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1421. [108426.430494] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1422. [108426.537871] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1423. [108426.543989] wlan0: authenticated
  1424. [108426.545839] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1425. [108426.553457] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1426. [108426.558674] wlan0: associated
  1427. [108777.941675] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1428. [108777.965315] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1429. [108778.069032] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1430. [108778.079904] wlan0: authenticated
  1431. [108778.081011] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1432. [108778.088739] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1433. [108778.094047] wlan0: associated
  1434. [108814.445132] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1435. [108814.469363] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1436. [108814.572071] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1437. [108814.582078] wlan0: authenticated
  1438. [108814.584058] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1439. [108814.592752] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1440. [108814.597989] wlan0: associated
  1441. [110993.593770] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1442. [110993.616665] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1443. [110993.719980] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1444. [110993.730318] wlan0: authenticated
  1445. [110993.731969] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1446. [110993.761588] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1447. [110993.766754] wlan0: associated
  1448. [111913.942873] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1449. [111913.972460] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1450. [111914.086345] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1451. [111914.190919] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1452. [111914.306726] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1453. [111923.281520] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1454. [111923.314644] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1455. [111923.324449] wlan0: authenticated
  1456. [111923.330251] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1457. [111923.340924] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=8)
  1458. [111923.346816] wlan0: associated
  1459. [115029.992195] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1460. [115030.019239] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1461. [115030.122935] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1462. [115030.227451] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1463. [115030.331205] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1464. [115039.242633] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1465. [115039.271481] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1466. [115039.378345] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1467. [115039.502392] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1468. [115039.521059] wlan0: authenticated
  1469. [115039.522353] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1470. [115039.535496] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1471. [115039.540780] wlan0: associated
  1472. [116604.932576] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1473. [116604.955873] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1474. [116605.059790] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1475. [116605.236010] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1476. [116605.244227] wlan0: authenticated
  1477. [116605.247716] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1478. [116605.351898] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1479. [116605.456119] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1480. [116605.560244] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  1481. [116607.751777] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1482. [116607.775837] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1483. [116607.903627] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1484. [116608.008427] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1485. [116608.112018] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1486. [116618.064576] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1487. [116701.805437] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1488. [116701.830126] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1489. [116701.934708] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1490. [116702.038459] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1491. [116702.142840] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1492. [116712.644861] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1493. [116712.685312] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1494. [116712.694722] wlan0: authenticated
  1495. [116712.697486] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1496. [116712.710622] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1497. [116712.719102] wlan0: associated
  1498. [116712.745656] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1499. [117066.052654] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1500. [117070.727556] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1501. [117070.758198] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1502. [117070.866037] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1503. [117070.871159] wlan0: authenticated
  1504. [117070.874004] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1505. [117070.982034] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1506. [117071.098140] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1507. [117071.202675] wlan0: association with 50:d4:f7:0f:ca:02 timed out
  1508. [117073.144853] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1509. [117073.187224] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1510. [117073.310000] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1511. [117073.446008] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1512. [117073.468039] wlan0: authenticated
  1513. [117073.469959] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1514. [117073.495299] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1515. [117073.500443] wlan0: associated
  1516. [117073.634425] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1517. [117994.548240] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1518. [117994.587091] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1519. [117994.694686] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1520. [117994.806799] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1521. [117994.915059] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1522. [117995.041989] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1523. [117996.712633] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1524. [117996.734762] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1525. [117996.749062] wlan0: authenticated
  1526. [117996.750618] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1527. [117996.778419] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1528. [117996.783824] wlan0: associated
  1529. [117996.811427] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  1530. [119431.013375] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1531. [119431.039715] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1532. [119431.143295] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1533. [119431.146885] wlan0: authenticated
  1534. [119431.147301] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1535. [119431.154759] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1536. [119431.159914] wlan0: associated
  1537. [127849.181115] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1538. [127849.231150] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1539. [127849.336128] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1540. [127849.348732] wlan0: authenticated
  1541. [127849.352369] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1542. [127849.374919] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1543. [127849.380296] wlan0: associated
  1544. [128011.161153] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1545. [128011.187599] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1546. [128011.295423] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1547. [128011.298964] wlan0: authenticated
  1548. [128011.299797] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1549. [128011.320504] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1550. [128011.325919] wlan0: associated
  1551. [130203.405099] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1552. [130203.440843] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1553. [130203.544516] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1554. [130203.556848] wlan0: authenticated
  1555. [130203.560476] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1556. [130203.565614] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1557. [130203.570799] wlan0: associated
  1558. [130238.073695] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1559. [130238.113539] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1560. [130238.219793] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1561. [130238.323863] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1562. [130238.428489] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1563. [130247.384235] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1564. [130247.411956] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1565. [130247.515676] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1566. [130247.521769] wlan0: authenticated
  1567. [130247.523632] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1568. [130247.532832] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1569. [130247.537946] wlan0: associated
  1570. [131375.019138] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1571. [131375.053702] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1572. [131375.172904] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1573. [131375.175839] wlan0: authenticated
  1574. [131375.176852] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1575. [131375.195199] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1576. [131375.200515] wlan0: associated
  1577. [133351.986487] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1578. [133352.026678] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1579. [133352.135068] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1580. [133352.155821] wlan0: authenticated
  1581. [133352.159052] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1582. [133352.167857] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1583. [133352.172870] wlan0: associated
  1584. [133746.698695] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1585. [133746.730223] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1586. [133746.837639] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1587. [133746.847046] wlan0: authenticated
  1588. [133746.849607] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1589. [133746.877335] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1590. [133746.882776] wlan0: associated
  1591. [135194.233276] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1592. [135194.254370] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1593. [135194.418143] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1594. [135194.523142] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 3/3)
  1595. [135194.666764] wlan0: authentication with 50:d4:f7:0f:ca:02 timed out
  1596. [135196.963609] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1597. [135196.998385] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1598. [135197.012715] wlan0: authenticated
  1599. [135197.013993] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1600. [135197.020905] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1601. [135197.027317] wlan0: associated
  1602. [135382.317994] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1603. [135382.368387] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1604. [135382.478926] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1605. [135382.481253] wlan0: authenticated
  1606. [135382.482936] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1607. [135382.487543] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1608. [135382.493000] wlan0: associated
  1609. [136324.916496] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1610. [136324.950672] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1611. [136325.069651] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1612. [136325.093268] wlan0: authenticated
  1613. [136325.097713] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1614. [136325.104507] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1615. [136325.109727] wlan0: associated
  1616. [138800.484224] wlan0: authenticate with 50:d4:f7:0f:ca:02
  1617. [138800.507920] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 1/3)
  1618. [138800.615476] wlan0: send auth to 50:d4:f7:0f:ca:02 (try 2/3)
  1619. [138800.624459] wlan0: authenticated
  1620. [138800.627492] wlan0: associate with 50:d4:f7:0f:ca:02 (try 1/3)
  1621. [138800.731523] wlan0: associate with 50:d4:f7:0f:ca:02 (try 2/3)
  1622. [138800.836117] wlan0: associate with 50:d4:f7:0f:ca:02 (try 3/3)
  1623. [138800.943786] wlan0: RX AssocResp from 50:d4:f7:0f:ca:02 (capab=0x431 status=0 aid=6)
  1624. [138800.960124] wlan0: associated
  1625. [138802.993064] wlan0: deauthenticated from 50:d4:f7:0f:ca:02 (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
  1626. [138923.232226] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1627. [157069.999814] extcon-disp-state extcon:disp-state: cable 40 state 0
  1628. [157069.999857] Extcon HDMI: HPD disabled
  1629. [157070.000189] tegradc tegradc.0: hdmi: unplugged
  1630. [157070.007836] tegradc tegradc.0: blank - powerdown
  1631. [157070.007852] tegradc tegradc.0: unblank
  1632. [157070.007887] tegradc tegradc.0: unblank
  1633. [157070.007899] tegradc tegradc.1: blank - powerdown
  1634. [324410.007890] tegradc tegradc.0: blank - powerdown
  1635. [324410.008030] tegradc tegradc.0: unblank
  1636. [324410.036331] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  1637. [324410.036428] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  1638. [324410.038021] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  1639. [324410.038029] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  1640. [324410.074758] extcon-disp-state extcon:disp-state: cable 47 state 1
  1641. [324410.074763] Extcon AUX1(HDMI) enable
  1642. [324410.082790] extcon-disp-state extcon:disp-state: cable 40 state 1
  1643. [324410.082795] Extcon HDMI: HPD enabled
  1644. [324410.082831] tegradc tegradc.0: hdmi: plugged
  1645. [324410.092217] tegradc tegradc.0: blank - powerdown
  1646. [324410.155461] extcon-disp-state extcon:disp-state: cable 47 state 0
  1647. [324410.155464] Extcon AUX1(HDMI) disable
  1648. [324410.176523] tegradc tegradc.0: unblank
  1649. [324410.192313] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  1650. [324410.192390] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  1651. [324410.193931] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  1652. [324410.193938] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  1653. [324410.230141] extcon-disp-state extcon:disp-state: cable 47 state 1
  1654. [324410.230144] Extcon AUX1(HDMI) enable
  1655. [324410.230388] tegradc tegradc.0: unblank
  1656. [324410.230396] tegradc tegradc.1: blank - powerdown
  1657. [324410.289526] tegradc tegradc.0: unblank
  1658. [324410.289742] tegradc tegradc.1: blank - powerdown
  1659. [324758.938151] extcon-disp-state extcon:disp-state: cable 47 state 0
  1660. [324758.938197] Extcon AUX1(HDMI) disable
  1661. [324758.956745] tegradc tegradc.0: blank - powerdown
  1662. [324758.956885] extcon-disp-state extcon:disp-state: cable 40 state 0
  1663. [324758.956888] Extcon HDMI: HPD disabled
  1664. [324758.956954] tegradc tegradc.0: hdmi: unplugged
  1665. [324758.966294] tegradc tegradc.0: blank - powerdown
  1666. [324758.966306] tegradc tegradc.0: unblank
  1667. [324758.966333] tegradc tegradc.0: unblank
  1668. [324758.966342] tegradc tegradc.1: blank - powerdown
  1669. [324759.479969] tegradc tegradc.0: blank - powerdown
  1670. [324759.480004] tegradc tegradc.0: unblank
  1671. [324759.502469] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  1672. [324759.502560] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  1673. [324759.504063] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  1674. [324759.504070] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  1675. [324759.539181] extcon-disp-state extcon:disp-state: cable 47 state 1
  1676. [324759.539186] Extcon AUX1(HDMI) enable
  1677. [324759.539486] extcon-disp-state extcon:disp-state: cable 40 state 1
  1678. [324759.539488] Extcon HDMI: HPD enabled
  1679. [324759.539540] tegradc tegradc.0: hdmi: plugged
  1680. [324759.545520] tegradc tegradc.0: blank - powerdown
  1681. [324759.604455] extcon-disp-state extcon:disp-state: cable 47 state 0
  1682. [324759.604457] Extcon AUX1(HDMI) disable
  1683. [324759.625660] tegradc tegradc.0: unblank
  1684. [324759.641357] tegradc tegradc.0: nominal-pclk:319750000 parent:319750000 div:1.0 pclk:319750000 316552500~348527500
  1685. [324759.641436] tegradc tegradc.0: hdmi: tmds rate:319750K prod-setting:prod_c_hdmi_300m_600m
  1686. [324759.643024] tegradc tegradc.0: hdmi: get RGB quant from EDID.
  1687. [324759.643031] tegradc tegradc.0: hdmi: get YCC quant from EDID.
  1688. [324759.679810] extcon-disp-state extcon:disp-state: cable 47 state 1
  1689. [324759.679812] Extcon AUX1(HDMI) enable
  1690. [324759.679958] tegradc tegradc.0: unblank
  1691. [324759.679965] tegradc tegradc.1: blank - powerdown
  1692. [324759.745063] tegradc tegradc.0: unblank
  1693. [324759.745225] tegradc tegradc.1: blank - powerdown
RAW Paste Data